Provide a filter for libc++ std::atomic<T>
This just hides some implementation clutter and promotes the actual content to only child status
llvm-svn: 200984
Move some code that was in DynamicLoaderPOSIXDLYD into the
base class DynamicLoader. In the case of UpdateLoadedSections(),
the test to see whether a file is loadable (its address is zero)
is not generally applicable so that test is changed to a more
universally applicable check for the SHF_ALLOC flag on the section.
Also make it explicit that the reading of the module_id in
DynamicLoaderPOSIXDYLD::GetThreadLocalData() is using a hardcoded
size (of module_id) of 4, which might not be appropriate on
big-endian 64-bit systems, leaving a FIXME comment in place.
llvm-svn: 200939
We now properly detect when a result object has an immediate output stream and don't echo the results a second time.
<rdar://problem/15954906>
llvm-svn: 200882
Also emit the "Executing commands" message so it properly only comes out when desired and so it comes out in the right place.
<rdar://problem/15992208>
llvm-svn: 200875
- empty lines in init files would repeat previous command and cause errors to be displayed
- all options to control showing the command, its output, if it should stop on error or continue, weren't being obeyed.
llvm-svn: 200860
libldi library to collect extended backtrace information; switch
to the libBacktraceRecording library and its APIs. Complete the
work of adding QueueItems to Queues and allow for the QueueItems
to be interrogated about their extended backtraces in turn.
There's still cleanup and documentation to do on this code but the
code is functional and I it's a good time to get the work-in-progress
checked in.
<rdar://problem/15314027>
llvm-svn: 200822
ScriptInterpreterPython caches the lldb.embedded_interpreter module, and since it caches it in a refcounting-safe PythonObject, the refcount will appropriately go down 1 every time a ScriptInterpreterPython is deallocated
However, we were only importing the module once - in InitializePrivate(). In a handful of interpreter creations, the refcount on the run_one_line function would end up at 0, causing LLDB to crash
This fixes it by also importing the module for every interpreter, which ensures correct refcounting
llvm-svn: 200816
This could use some refinement still, but the previous behaviour of adding
-stdlib=libstc++ on FreeBSD w/ Clang is the least likely case to work.
llvm.org/pr17910
llvm-svn: 200646
Fixes http://llvm.org/bugs/show_bug.cgi?id=18656.
Note this exposes a failure on Linux of
TestInferiorAssert.test_inferior_asserting_disassemble, similar to how
it fails on FreeBSD. I'll file a bug for this next. We're now getting
another frame beyond where we used to prior to this fix, so the fix is
exposing failures in previosly not-reachable frames.
Much thanks to Jason Molenda, who had much to do with helping figure
out where unwinding was breaking.
llvm-svn: 200600
This change addresses shutdown crashes in the python lldb module when
the script interpreter was hanging on to saved file references after
leaving a session. It also gets rid of extra references to the
stdin/stdout/stderr python file objects that are created when entering
the session.
This change also moves the bundled pyexpect 2.4 library to the front
of the python library path so that a python distribution default
pyexpect (2.3 in Ubuntu 12.04) is not picked up first.
llvm-svn: 200486
PyTuple_SetItem steals a reference to the item it inserts in the tuple
This, plus the Py_XDECREF of the tuple a few lines below, causes our session dictionary to go away after the first time a SWIG layer function is called - with disastrous effects for the first subsequent attempt to use any functionality in ScriptInterpreterPython
This fixes it
llvm-svn: 200429
GDBProcessCommunicationServer now optionally takes a PlatformSP that
defaults to the default platform for the host.
GDBProcessCommunicationServer::LaunchProcess () now uses the platform
to launch the process.
lldb-gdbserver now takes an optional --platform={platform_plugin_name}
or -p {platform_plugin_name} command line option. If no platform is
specified, the default platform for the host is used; otherwise, if
the platform_plugin_name matches a registered platform plugin or
matches the default platform's name (which is not necessarily
registered by name in the case of 'host'), that platform is used. If
the platform name cannot be resolved, lldb-gdbserver exits after
printing all the available platform plugin names and the default
platform plugin name.
llvm-svn: 200266
The many many benefits include:
1 - Input/Output/Error streams are now handled as real streams not a push style input
2 - auto completion in python embedded interpreter
3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use
4 - it is now possible to use curses to drive LLDB (please try the "gui" command)
We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases.
llvm-svn: 200263
if the remote stub provided enough information to identify it in the
qProcessInfo packet response. (e.g. for an Apple device where we know
it is Mach-O, the cpu type & cpu sub type).
<rdar://problem/15847901>
llvm-svn: 200253
ValueObjectPrinter could enter an infinite loop while trying to display an aptly formed ValueObject: a reference, with a child of some pointer type, such that the pointees chain ended up pointing back to some part of itself - a pointer to itself being the simplest such case
Fixed here by only setting a pointer depth when needed, and ensuring that we won't overflow and wrap the pointer depth when it's zero.
llvm-svn: 200247
This change modifies the 'A' command handler's launch code to launch
with LaunchProcess (). The net effect is that the default process
monitoring that LaunchProcess () adds will kick in, allowing the
GDBRemoteCommunicationServer to be able to reap processes started with
this facility correctly. Later, in the case of lldb-gdbserver, we'll
also have the proper process monitoring going on to really debug the
inferior process.
llvm-svn: 200246
This patch addresses a bug where in a multi-threaded program a new
signal from the inferior may be received before all group-stop
messages from an earlier signal have been handled.
Patch by Andrew MacPherson
llvm-svn: 200226
There are a couple of pieces:
* some lazy-evaluation members that store info listed in a qSupported response
* new method SendPacketsAndConcatenateResponses which is used for
fetching fixed-size objects from the remote gdbserver by using multiple
packets if necessary (first use will be to fetch shared-library XML files).
llvm-svn: 200072
GetU32 and GetU64, to use memcpy to copy bytes into a local buffer instead
of having a (uint64_t *) etc local variable, pointing to the address, and
dereferencing it. If compiled on a CPU where data alignment is required
(e.g. the LDM instruction on armv7) and we try to GetU64 out of a mmap'ed
DWARF file, that 8 byte quantity may not be world aligned and the program
can get an unaligned memory access fault.
<rdar://problem/15849231>
llvm-svn: 200069
right after the space for it is allocated on the stack, instead of trying
to initialize it in all the different places in this method. It's too easy
for another uninitialized code path to sneak in as it is written right now.
llvm-svn: 200066
GDBRemoteCommunicationServer::LaunchProcess () now uses the built-up
ProcessLaunchArgs rather than clearing and setting items from the
function arguments. I added setters for the arguments and launch
flags, which lldb-gdbserver uses for its specification of the
commandline-specified startup app (if one is specified).
LaunchProcess () also adds a new reaper monitor that it applies to
the launched process if no process monitor has already been applied.
This addresses an issue where the 'k' command would generate (possibly
false) warnings about not being able to positively state whether a
killed process actually terminated. GDBRemoteCommunicationServer now
definitely knows the disposition of its children.
llvm-svn: 199959
lldb-gdbserver was launching the commandline-specified launch process
directly, without GDBRemoteCommunicationServer knowing anything about
it. As GDBRemoteCommunicationServer is the piece that manages and
knows about processes that the gdb remote protocol discusses with
the client end, it is important that it know about launched processes.
This change also implements the k gdb remote protocol message, having it
kill all known spawned processes when it is received.
(Note: in lldb-gdbserver, the spawned processes are not properly
monitored yet. The response to the k packet will complain that
spawned processes do not really appear to be getting killed even if
they are. This will get addressed soon.)
llvm-svn: 199945
SBType SBType::GetTypedefedType();
Also added the ability to get a type by type ID from a SBModule:
SBType SBModule::GetTypeByID (lldb::user_id_t uid);
llvm-svn: 199939
This reverts Host.cpp LaunchProcess spawn behavior on FreeBSD to be
like Linux (and unlike OS X) with regards to how default signal
handlers and setup on the spawned process. FreeBSD does not reset
default signal handlers on the spawned process after this change.
llvm-svn: 199908
This fixes a bug under Linux where spawning a process via
Host::LaunchProcess was disabling all blockable signals on the
launched process. This caused strange behavior when attempting
to kill the lldb-gdbserver process, as the child generally would
not die unless killed with a non-blockable signal (e.g. 'kill -9').
This change moves several functions out of macosx/Host.mm into
common/Host.cpp. In addition, two functions that needed to work
across common/Host.cpp and macosx/Host.mm were moved into the Host.h
header file.
llvm-svn: 199856
lldb-gdbserver now takes zero or more --lldb-command {command} options
that get executed by the command interpreter prior to starting up
a child debuggee process. The short form is -c {command}. This is
similar to how lldb-platform works.
This command can be used to enable logging in more than just the
gdb-remote log channel. Here is an example startup sequence that allows
logging of lldb host and process log categories to one file and
gdb-remote packets to another file:
lldb-gdbserver -c 'log enable -f lgs.log lldb process host' \
-c 'log enable -f lgs_packets.log gdb-remote packets' \
localhost:5432 ./some_exe
llvm-svn: 199761
The alias test "exprf x 1234" expands to "expr -f x 1234" and is
expected to fail: it ends up trying to evaluate the invalid expression
void
$__lldb_expr(void *$__lldb_arg)
{
-f x 1234;
}
On FreeBSD LLDB ends up finding a static function f() in a math library,
and thus the error produced does not include "use of undeclared
identifier 'f'".
We will report failure to parse the expression in any case, so require
only that error message.
llvm-svn: 199623
This change does the following:
* Adds Makefile build scripts to debug server.
* Fixes a few small mistakes in the other makefiles.
* Modifies generate-vers.pl slightly to also work for debugserver.
* Changes the OS X, non-framework python search path from libdir to
libdir/python2.X/site-packages where it is installed by the build
system (also where it is installed on other operating systems).
Patch by Keno Fischer.
llvm-svn: 199543
ArchSpec now contains an optional distribution_id, with getters and
setters. Host::GetArchitecture () sets it on non-Apple platforms using
Host::GetDistributionId (). The distribution_id is ignored during
ArchSpec comparisons.
The gdb remote qHostInfo message transmits it, if set, via the
distribution_id={id-value} key/value pair. Updated gdb remote docs to
reflect this change.
As before, GetDistributionId () returns nothing on non-Linux platforms
at this time. On Linux, it is returned only if the lsb_platform
command is installed (in /bin or /usr/bin), and only if the
distributor id key is returned by 'lsb_platform -i'. This id is
lowercased, and whitespace is replaced with underscores.
llvm-svn: 199539
The Linux distribution will be added to the ArchSpec class in an
upcoming change. This change only undoes the change to the triple. The
distribution retrieval logic and enabling of lldb-gdbserver for linux
x86_64 builds is still in place.
llvm-svn: 199520
xcode project file sets the MACOSX_DEPLOYMENT_TARGET to 10.7.
llvm/configure (as of r199313) tries to compile a .cpp file which
includes <atomic> with -std=c++0x. If the deployment target is set
to earlier than 10.9 and no C++ library is specified, clang will
error out at this point.
Fixes xcode building of lldb on Mac OS X. If this change causes
problems for any of the other build workflows, please let me know
and I'll fix it.
llvm-svn: 199511
This change does the following:
* enables building lldb-gdbserver on linux_x86-64 platforms.
Note - it builds but it has several run-time issues where many gdb
remote protocol features are not properly implemented yet. I'm
working on these one at a time.
* lldb-gdbserver: does not enable the eLaunchFlagDebug launch flag on
Linux. Currently the POSIX launch routine will assert if that flag
is passed in, presumably because that launch mode is not yet
available. This prevents lldb-gdbserver from asserting the moment
it launches the debuggee process.
* Adds ConstString& Host::GetDistributionId ()
This method is defined to return an empty result on all platforms
except for Linux. On Linux, it makes one attempt to execute
'lsb_release -i' (both /usr/bin/lsb_release, where it appears
on ubuntu, and /bin/lsb_release, where it appears on fedora
if the redhat-lsb package is installed). If lsb_release is not
found in either of those locations, or if 'lsb_release -i' does
not return the first line starting with "Distributor ID:\t",
then the distribution id is empty. The method will lower-case
the id and replace whitespace with underscores.
* Modify Host::GetArchitecture () so that linux replaces an unknown
vendor portion with the results of GetDistributionId () if that
is non-empty. This shows up now in qHostInfo remote packet
responses and on the lldb host side. Tested with ubuntu and
fedora (the latter both with the default of not having lsb_release
installed, and with having lsb_release installed via the redhat-lsb
package).
Examples of triples on Linux after this change:
# x86_64 Unbuntu 12.04 LTS:
x86_64-ubuntu-linux-gnu
# x86_64 Fedora 20 Desktop with redhat-lsb package installed
x86_64-fedora-linux-gnu
# x86_64 Fedora 20 Desktop without redhat-lsb-core installed
# (i.e. no /bin/lsb_release available)
# same as before the change
x86_64--linux-gnu
Note I intend to have Android respond with:
{arch}-android-linux
when I get to implementing Android lldb-gdbserver support.
llvm-svn: 199510
This rename was suggested by gclayton as a way to silence gcc
warnings; the warning is emitted when there is an overloaded function
in a base class (Platform) for which a derived class redefines one of
the overloads but not the other (because doing so hides the other
overload from users of the derived class). By giving the two methods
different names, the situation is avoided.
llvm-svn: 199504
Part 1 changes PlatformLinux::CreateInstance to always create with
is_host=false; that method is only used as the plug-in creator method
associated with the remote-linux platform plugin, and should therefore
always be remote.
Part 1 patch by Steve Pucci.
Part 2: fix a test break on linux.
In test/functionalities/thread/thread_specific_break, when using gcc,
either C99 mode would need to be enabled, or the code would need to
change. I changed a couple loop variable definitions to conform
to pre-C99 to simplify testing the fix. The second issue was
the necessity to include -lpthread as a linker option in the Makefile.
Any issues with that part are due to me (Todd Fiala).
llvm-svn: 199426
control to the user anyway. This was put in to handle monitors that would say there was no
stop reason when you first attached to them. But it broke the case where you hit a thread specific
breakpoint on many threads, but NOT the one specified in the breakpoint. I work around this
by only doing the junky override when the StopID is 0 - i.e. on first attach.
This commit also adds a test for thread specific breakpoints.
llvm-svn: 199290
and re-exported symbols. I don't know if Linux has the latter, if it does, we could
probably make this a generic test. Somebody who knows how to make these gadgets on
Linux can maybe take a look...
llvm-svn: 199134
As done in other DW_OP_* cases, return an error if the stack is empty
rather than eventually crashing elsewhere. Encountered on big-endian
MIPS, where LLVM bugs currently result in invalid .debug_loc data.
llvm-svn: 199110
<rdar://problem/15797390>
This new test case will detect this and make sure we don't regress on global name lookups that search all DWARF for everything when we don't need to.
llvm-svn: 198982
symbols correctly. There were a couple of pieces to this.
1) When a breakpoint location finds itself pointing to an Indirect symbol, when the site for it is created
it needs to resolve the symbol and actually set the site at its target.
2) Not all breakpoints want to do this (i.e. a straight address breakpoint should always set itself on the
specified address, so somem machinery was needed to specify that.
3) I added some info to the break list output for indirect symbols so you could see what was happening.
Also I made it clear when we re-route through re-exported symbols.
4) I moved ResolveIndirectFunction from ProcessPosix to Process since it works the exact same way on Mac OS X
and the other posix systems. If we find a platform that doesn't do it this way, they can override the
call in Process.
5) Fixed one bug in RunThreadPlan, if you were trying to run a thread plan after a "running" event had
been broadcast, the event coalescing would cause you to miss the ThreadPlan running event. So I added
a way to override the coalescing.
6) Made DynamicLoaderMacOSXDYLD::GetStepThroughTrampolinePlan handle Indirect & Re-exported symbols.
<rdar://problem/15280639>
llvm-svn: 198976
I previously fixed a bug in the SocketAddress class where SocketAddress::GetPort() wasn't using ntohs() on the port number in the structures.
After fixing this, it broke places where we weren't using ntohs() and htons() correctly.
<rdar://problem/15767514>
llvm-svn: 198902
"Open LLDB and run:
(lldb) script print lldb.debugger.GetInputFileHandle()
This puts the debugger into a catatonic state and all interactions seem
to enter a black hole. The reason is that executing this commnand
actually *CLOSES* the input file handle and so all input is dropped on
the floor. Oof!
The fix is simple: flush a descriptor, instead of closing it, when
transferring ownership."
llvm-svn: 198835
210: test_with_dsym_and_run_command (Test-rdar-10642615.Radar10642615DataFormatterTestCase)
Test data formatter commands. ... Assertion failed: (isa<X>(Val) && "cast<Ty>() argument of incompatible type!"), function cast, file llvm/include/llvm/Support/Casting.h, line 239.
226: test_with_dsym_and_run_command (Test-rdar-13338477.Radar13338477DataFormatterTestCase)
Test that LLDB handles the clang typeclass Paren correctly. ... Assertion failed: (isa<X>(Val) && "cast<Ty>() argument of incompatible type!"), function cast, file llvm/include/llvm/Support/Casting.h, line 239.
llvm-svn: 198811
it is causing an llvm assert when run against
test/functionalities/data-formatter/rdar-10642615,
Assertion failed: (isa<X>(Val) && "cast<Ty>() argument of incompatible type!"), function cast, file llvm/include/llvm/Support/Casting.h, line 239.
llvm-svn: 198809
This change fixes a bug recently introduced in ProcessGDBRemote that
prevented the Python register definition file from getting loaded when
the qRegisterInfo0 response returned $00#.
Patch by Steve Pucci.
llvm-svn: 198742
When determining the type of array members, do not see-through typedefs
For instance, in BOOL arr[4], we want the elements to be typed as BOOL, not signed char
llvm-svn: 198729
materialize a variable in a register correctly
if the variable is a pointer. This fixes a
regression introduced by my commit of Oct. 22nd
(r193191).
llvm-svn: 198718
- If there is only 1 frame ptr_refs now works (fixed issue with stack detection)
- Fixed test for result now that it isn't a pointer anymore
llvm-svn: 198712
and EmulateInstructionARM::GetFramePointerDWARFRegisterNumber to recognize
the Apple arm convention (of using r7 for the frame pointer, regardless of
thumb or arm) even if the OS does not match Darwin/MacOSX/iOS. Also
corrects the behavior for thumb code on non-Apple platforms.
<rdar://problem/14661537>
llvm-svn: 198648
The former will set the Address object's offset to the load address value if
it is not present in any section; the latter will only set the Address object
if the load addr is contained in one of its sections.
<rdar://problem/15135987>
llvm-svn: 198469
its stack frame is a constructed, fake thing that may not conform
correctly to these rules. This fixes a problem where lldb couldn't
backtrace past an asynchronous signal handler (_sigtramp) frame on
a stack on Mac OS X.
<rdar://problem/15035673>
llvm-svn: 198450
The "type format add" command gets a new flag --type (-t). If you pass -t <sometype>, upon fetching the value for an object of your type,
LLDB will display it as-if it was of enumeration type <sometype>
This is useful in cases of non-contiguous enums where there are empty gaps of unspecified values, and as such one cannot type their variables as the enum type,
but users would still like to see them as-if they were of the enum type (e.g. DWARF field types with their user-reserved ranges)
The SB API has also been improved to handle both types of formats, and a test case is added
llvm-svn: 198105
interpret core files that contain both a user
process dyld and a kernel executable in them.
Fix an additional method that needs to be
adjusted depending on this preference as well.
<rdar://problem/15721409>
llvm-svn: 197931
TypeFormatImpl used to just wrap a Format (and Flags for matching), and then ValueObject itself would do the printing deed
With this checkin, the responsibility of generating a value string is centralized in the data formatter (as it should, and already is for summaries)
This change is good practice per se, and should also enable us to extend the type format mechanism in a cleaner way
llvm-svn: 197874
it needs to fall back to using the HostArchitecture if a valid one is not
returned. When doing low-level system debugging we may not have a process
(or the remote stub may not support the qProcessInfo packet) in which case
we should fall back to the architecture we determined via qHostInfo.
<rdar://problem/15713180>
llvm-svn: 197857
So, rename the class for what it truly is: a FormattersContainer
Also do a bunch of related text substitutions in the interest of overall naming clarity
llvm-svn: 197795
of Objective-C classes are completed, and that
variables of Objective-C types have their types
completed when the variables are reported.
This fixes a long-standing issue where ivars did
not show up correctly on 32-bit OS X.
<rdar://problem/12184093>
llvm-svn: 197775
specify a pointer size until code gen. So we just
make all our pointer-sized integer literals 64-bit.
That doesn't seem to hurt anything.
llvm-svn: 197774
The original code was not completely correct, but a form of
this check is necessary to avoid an infinite recursion on
some unwind cases where a function unwinds to itself with the
same CFA. Ashok thought the recursion would be caught in
RegisterContextLLDB but this one isn't - we still need it here.
<rdar://problem/15664282>
llvm-svn: 197761
In those set of patches, Ashok changed Module::ResolveSymbolContextForAddress
so that if it failed to find a symbol for a pc, it could back up
the pc value by 1 and re-search for a symbol.
His change to RegisterContextLLDB.cpp partially duplicates that
behavior but it also removes the separate case where we find a
Symbol for the pc address but it's the wrong symbol -- we need to
handle this as well as the lookup-by-pc-finds-no-symbol case.
The most obvious fallout from this regression was that lldb on
Mac OS X couldn't backtrace past __assert_rtn() which tail-calls
abort(). e.g.
(lldb) bt
* thread #1: tid = 0x5d6ea1, 0x00007fff8ee80866 libsystem_kernel.dylib`__pthread_kill + 10, queue = 'com.apple.main-thread', stop reason = signal SIGABRT
* frame #0: 0x00007fff8ee80866 libsystem_kernel.dylib`__pthread_kill + 10
frame #1: 0x00007fff8eb5835c libsystem_pthread.dylib`pthread_kill + 92
frame #2: 0x00007fff8852ab1a libsystem_c.dylib`abort + 125
frame #3: 0x00007fff884f49bf libsystem_c.dylib`__assert_rtn + 321
frame #4: 0x0000000100000f2c a.out`main + 124
(lldb) dis -c 3 -s 0x7fff884f49b3
libsystem_c.dylib`__assert_rtn + 309:
0x7fff884f49b3: movq %rax, -0x11b96242(%rip) ; gCRAnnotations + 8
0x7fff884f49ba: callq 0x7fff8854fd2c ; symbol stub for: abort
libsystem_c.dylib`basename:
0x7fff884f49bf: pushq %rbp
(lldb)
in this case, __assert_rtn() is immediately followed by basename() and
the changes in r190812 didn't back up the pc value to get the correct
function name / unwind info.
<rdar://problem/15367233>
llvm-svn: 197655
offsets structure is read & saved in the platform object -- soon
we'll be getting more than the queue name offset out of this
structure so we'll need to reuse the information in other methods.
llvm-svn: 197620
During testing I observed QEMU send "$T02thread:01;#04" upon connection,
before any command from LLDB. This change from gclayton accepts (and
discards) a packet immediately after sending the initial ack, to flush
the GDB remote pipeline.
llvm-svn: 197579
While investigating test suite failures when running the test suite remotely, I noticed we had 3 copies of code that launched a process:
1 - in "process launch" command
2 - SBTarget::Launch() with args
3 - SBTarget::Launch() with SBLaunchInfo
"process launch" was launching through the platform if it was supported (this is needed for remote debugging) and the 2 and 3 were not.
Now all code is in one place.
llvm-svn: 197247
libdispatch aka Grand Central Dispatch (GCD) queues. Still fleshing out the
documentation and testing of these but the overall API is settling down so it's
a good time to check it in.
<rdar://problem/15600370>
llvm-svn: 197190
test_convenience_registers_16bit_with_process_attach fails due to
pr18200. The test has a @expectedFailureFreeBSD decorator, but it
appears this does not catch a RuntimError exception raised in the test
infrastructure, so the test still reports failure. For now just skip
it.
llvm-svn: 197174
<rdar://problem/15594781>
We need to not crash at any cost. We currently detect if any base classes are forward declarations, emit an error string that directs the use to file a compiler bug, and continues by completing the class with no contents. This avoids a clang crash that would usually follow when we call setBase().
llvm-svn: 197108
With this checkin, we use the installed clang compiler to build crashinfo.so from crashinfo.c upon every test suite execution
We also try to cleanup after ourselves, which of course will only work if the test suite does not actually crash
llvm-svn: 197106
Add an hook for the test suite into the OSX-only CrashReporter "App-specific info"
This allows the test suite to set the crash info to the name and file location of every test as the test gets executed
If the test suite crashes, the crash log will then report which test is the culprit, even when not using verbose mode
This only works on OSX, and defaults to not doing anything on other platforms, but OS/platform-specific invocations
can be devised by each individual platform
llvm-svn: 197095
This has led to many test suite failures because of copy and paste where new test cases were based off of other test cases and the "mydir" variable wasn't updated.
Now you can call your superclasses "compute_mydir()" function with "__file__" as the sole argument and the relative path will be computed for you.
llvm-svn: 196985
Previously, an opcode set via SetOpcode32 (for example) was later
extracted via GetData() as a byte sequence in host order rather than
target order.
Review: http://llvm-reviews.chandlerc.com/D1838
llvm-svn: 196808
Summary: Now that Host provide a MakeDirectory function, we can use it instead of relying on command line tool to create a directory.
CC: lldb-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2356
llvm-svn: 196801
it succeeded, since the plan that was using it can figure out what to do from there.
It should only say it failed if it truely went off into the weeds.
<rdar://problem/15597807>
llvm-svn: 196631
Failure to install python packages now fails the make install.
This patch properly handles the optional DESTDIR variable.
Patch by Todd Fiala
llvm-svn: 196624
<rdar://problem/15600045>
Due to other recent changes, all connections to GDB servers that didn't support the "QStartNoAckMode" packet would cause us to fail to attach to the remote GDB server.
The problem was that SendPacket* and WaitForResponse* packets would return a size_t indicating the number of bytes sent/received. The other issue was WaitForResponse* packets would strip the leading '$' and the trailing "#CC" (checksum) bytes, so the unimplemented response packet of "$#00" would get stripped and the WaitForResponse* packets would return 0.
These new error codes give us flexibility to to more intelligent things in response to what is returned.
llvm-svn: 196610
<rdar://problem/15314403>
This patch adds a new lldb_private::SectionLoadHistory class that tracks what shared libraries were loaded given a process stop ID. This allows us to keep a history of the sections that were loaded for a time T. Many items in history objects will rely upon the process stop ID in the future.
llvm-svn: 196557
This gets rid of our hacky "get_random_port()" which would grab a random port and tell debugserver to open that port. Now LLDB creates, binds, listens and accepts a connection by binding to port zero and sending the correctly bound port down as the host:port to connect back to.
Fixed the "ConnectionFileDescriptor" to be able to correctly listen for connections from a specified host, localhost, or any host. Prior to this fix "listen://" only accepted the following format:
listen://<port>
But now it can accept:
listen://<port> // Listen for connection from localhost on port <port>
listen://<host>:<port> // Listen for connection from <host> and <port>
listen://*:<port> // Listen for connection from any host on port <port>
llvm-svn: 196547
@skipIfRemote is used to decorate test cases that don't make sense to run remotely.
@skipIfRemoteDueToDeadlock indicates these tests need to be looked at and currently deadlock the running of the test suite when run on remote systems. These issues should be fixed soon.
llvm-svn: 196543
This is not being used yet, and in practice, more refactoring would be required to make this fully practical
In practice, the way this should work is that CalculateNumChildren(), GetChildAtIndex(), GetIndexOfChildWithName() and MightHaveChildren() should all default to failure values when m_valid == false. Update() should be the only function actually setting/clearing the flag upon inspecting the backend ValueObject, if it determines it to be in an incongruent state
Given refactoring of the FrontEnd APIs, this work could be automatically performed without the individual providers having to replicate this logic
The way this works now is that each front end picks one or more “key ivars” and keys off those to detect invalidity
This is a baby step 0 to a better world
llvm-svn: 196452
This helps ensure that the launched debugserver is ready and listening for a connection. Prior to this we had a race condition.
Consolidate the launching of debugserver into a single place: a static function in GDBRemoteCommunication.
llvm-svn: 196401
This will get the temporary directory on the current system.
Removed a call to tmpnam() and replaced it with a call to mktemp() using a template that will be in the temp directory.
llvm-svn: 196397
Fix use of std::lower_bound to check for equality if a match is found to ensure we don't return the next breakpoint with an ID greater than the break_id that was asked for.
llvm-svn: 196298
the build being broken for people using the public Mac OS X 10.9 SDK,
which does not have the Python framework any longer. The Xcode project
file already sets the -I and -L flags correctly so that <Python.h> and
-lpython will work correctly with the system's installed Python.
llvm-svn: 196259
indications that the UnwindPlan is invalid -- for instance, a
complete lack of rows, or a row that fails to define a register to
base the CFA off of.
<rdar://problem/15246247>
llvm-svn: 196201
This should probably be replaced with build infrastructure support for
a platform-specific canonical Python include path, but for now it should
restore the FreeBSD buildbot.
llvm-svn: 196167
lldb_private::Debugger was #including some "lldb/API" header files which causes tools (lldb-platform and lldb-gdbserver) that link against the internals only (no API layer) to fail to link depending on which calls were being used.
Also fixed the current working directory so that it gets set correctly for remote test suite runs. Now the remote working directory is set to: "ARCH/TESTNUM/..." where ARCH is the current architecture name and "TESTNUM" is the current test number.
Fixed the "lldb-platform" and "lldb-gdbserver" to not warn about mismatched visibility settings by having each have their own exports file which contains nothing. This forces all symbols to not be exported, and also quiets the linker warnings.
llvm-svn: 196141
Summary:
- Stop to try to rebuild llvm on each invocation by removing the invalid library entry libLLVMArchive.a which no longer exists.
- Remove the useless ranlib invocation. "libtools -static" automatically takes care of the archive table of content.
CC: lldb-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2296
llvm-svn: 196128
Separate ELF note implementations were introduced for core files and
GNU build-id. Move the more general one from elf-core to ObjectFileELF
and use it for build-id as well.
Review: http://llvm-reviews.chandlerc.com/D1902
llvm-svn: 196125
A number of tests fail to build on FreeBSD because the test build script
defaults to libstdc++ for clang. On FreeBSD the libstdc++ is rather old
and libc++ should be used instead.
(These tests previously had an @expectedFailureFreeBSD decorator for
pr16696, the umbrella PR for the lack of threaded inferior support on
FreeBSD. The work to add that support will be committed soon.)
llvm-svn: 196101
Added _WIN32 guards to new platform features. Using correct SetErrorStringWithFormat within Host when LLDB_DISABLE_POSIX is defined. Also fixed an if defined block.
llvm-svn: 195766
From Jim Ingham's email:
It does look like ThreadPlanStepInRange test is some kind of thinko.
In practice, in this case it is probably safe to run only one thread
when doing the "step through" since that generally involved running
from a shared library stub to its target. That could deadlock if the
dynamic loader has to fix up the symbol, and another thread is in the
middle of doing that. But that doesn't seem to be very common, or at
least the code is clearly wrong but I haven't had any reports of this
causing deadlocks...
llvm-svn: 195657
Although ptrace() can be passed a PID or TID for PT_CONTINUE and PT_STEP,
the kernel operates on all threads in the process in both cases. (See
the FOREACH_THREAD_IN_PROC in FreeBSD's sys_process.c:kern_ptrace.)
Make this clear by using the PID from the ProcessMonitor instance.
llvm-svn: 195656
the installed SDK to using the current OS installed headers/libraries.
This change is to address the removal of the Python framework
from the Mac OS X 10.9 (Mavericks) SDK, and is the recommended
workaround via https://developer.apple.com/library/mac/technotes/tn2328/_index.html
llvm-svn: 195557
SmallPtrSet.cpp use different methods if SmallPtrSet.h is included
in C++11 mode. Building llvm in C++03 mode and lldb in C++11 mode
resulted in a link-time failure with the C++11-mode-specific method
not being found in the llvm build.
llvm-svn: 195544
Improved the detection of a valid GDB server where we actually can connect to a socket, but then it doesn't read or write anything (which happens with some USB mux software).
Host::MakeDirectory() now can make as many intermediate directories as needed.
The testsuite now has very initial support for remote test suite running. When running on a remote platform, the setUp function for the test will make a new directory and select it as the working directory on the remote host.
Added a common function that can be used to create the short option string for getopt_long calls.
llvm-svn: 195541
Mainly patched to stop LLDB from crashing. This can easily happen if you debug to a remote gdbserver that doesn't have any dynamic register info and you don't have a target definition file specified.
llvm-svn: 195499
Fixed a bunch of issues with many functions that were added for the platform host IO calls where they might not reply to the packet if the packet was malformed.
Cleaned up error codes.
Added a port offset to allow for connections across a USB mux.
llvm-svn: 195485
0 as CPU subtype never matches anything (at least, it doesn't match x86_64 windows binaries, of which there are correct arch definitions for). It should be created with LLDB_INVALID_CPUTYPE.
llvm-svn: 195435
Rework data formatters matching algorithm
What happens now is that, for each category, the FormatNavigator generates all possible matches, and checks them one by one
Since the possible matches do not actually depend on the category (whether a match is accepted or not does, but that check can be shifted at a more convenient time),
it is actually feasible to generate every possible match upfront and then let individual categories just scan through those
This commit changes things by introducing a notion of formatters match candidate, and shifting responsibility for generating all of them given a (ValueObject,DynamicValueType) pair
from the FormatNavigator back to the FormatManager
A list of these candidates is then passed down to each category for matching
Candidates also need to remember whether they were generated by stripping pointers, references, typedefs, since this is something that individual formatters can choose to reject
This check, however, is conveniently only done once a "textual" match has been found, so that the list of candidates is truly category-independent
While the performance benefit is small (mostly, due to caching), this is much cleaner from a design perspective
llvm-svn: 195395
Added a new "Host/Debug.h" which contains the pure virtual class definitions for NativeProcessProtocol and NativeThreadProtocol. These classes are host layer classes that, over time, every host that supports debugging will implement once.
Then the new "lldb-gdbserver" binary in the tools directory will be able to make a remote debugging binary from these native classes, and we will also be able to have a new lldb_private::Process class that implements native debugging using these classes.
So as soon as linux and MacOSX switch over to using this layer, everyone will get native and remote debugging.
This check-in is primarily to get the needed code in so that poeple can start trying to implement the NativeProcessProtocol and NativeThreadProtocol and use it in the GDBRemoteCommunicationServer class to implement a GDB server for remote debugging.
llvm-svn: 195369
--gdbserver-port PORT
--min-gdbserver-port PORT
--max-gdbserver-port PORT
The --gdbserver-port option can be specified multiple times to tell lldb-platform which ports it can use when launching child GDB server processes.
The --min-gdbserver-port and --max-gdbserver-port options allow a range of ports to be specified for use when launching child GDB server processes.
Fixed the code to manage these ports correctly in GDBRemoteCommunicationServer.
Also changed GDBRemoteCommunicationClient to not set a port when sending the "qLaunchGDBServer" packet so that the remote lldb-platform can decide which ports to use. If the lldb-platform was launched with no --gdbserver-port or --min-gdbserver-port/--max-gdbserver-port options, then port 0 is always used and a unix socket is used between the lldb-platform and child GDB server process to coordinate the use of valid port.
llvm-svn: 195300
Change the NSSet data formatter to not use the expression parser to produce synthetic children
In small-scale experimentation with lldb-perf, this improves our performance by around 25%
llvm-svn: 195294
Example code:
remote_platform = lldb.SBPlatform("remote-macosx");
remote_platform.SetWorkingDirectory("/private/tmp")
debugger.SetSelectedPlatform(remote_platform)
connect_options = lldb.SBPlatformConnectOptions("connect://localhost:1111");
err = remote_platform.ConnectRemote(connect_options)
if err.Success():
print >> result, 'Connected to remote platform:'
print >> result, 'hostname: %s' % (remote_platform.GetHostname())
src = lldb.SBFileSpec("/Applications/Xcode.app/Contents/SharedFrameworks/LLDB.framework", False)
dst = lldb.SBFileSpec()
# copy src to platform working directory since "dst" is empty
err = remote_platform.Install(src, dst);
if err.Success():
print >> result, '%s installed successfully' % (src)
else:
print >> result, 'error: failed to install "%s": %s' % (src, err)
Implemented many calls needed in lldb-platform to be able to install a directory that contains symlinks, file and directories.
The remote lldb-platform can now launch GDB servers on the remote system so that remote debugging can be spawned through the remote platform when connected to a remote platform.
The API in SBPlatform is subject to change and will be getting many new functions.
llvm-svn: 195273
The demangler added in r193708 from cxa_demangle.cpp uses language features which are not supported by the latest visual studio. In order to preserve the msvc build, this patch restores the previous (non)functionality in windows under msvc by disabling the demangler.
llvm-svn: 195254
(and same thing to Thread base class) which can be used when looking
at an ExtendedBacktrace thread; it will try to find the IndexID() of
the original thread that was executing this backtrace when it was
recorded. If lldb can't find a record of that thread, it will return
the same value as IndexID() for the ExtendedBacktrace thread.
llvm-svn: 194912
The failure to demangle 'anonymous namespace' on FreeBSD is fixed (twice)
- the failure in FreeBSD's in-tree __cxa_demangle has been addressed
- FreeBSD now uses the copy of the demangler built into lldb, due to other
remaining limitations in the in-tree __cxa_demangle
llvm.org/pr15302
llvm-svn: 194855
do anything right now. Add a few new methods to the Thread base
class which HistoryThread needs. I think I updated all the
CMakeLists files correctly for the new plugin.
llvm-svn: 194756
Added two new GDB server packets to debugserver: "QSaveRegisterState" and "QRestoreRegiterState".
"QSaveRegisterState" makes the remote GDB server save all register values and it returns a save identifier as an unsigned integer. This packet can be used prior to running expressions to save all registers.
All registers can them we later restored with "QRestoreRegiterState:SAVEID" what SAVEID is the integer identifier that was returned from the call to QSaveRegisterState.
Cleaned up redundant code in lldb_private::Thread, lldb_private::ThreadPlanCallFunction.
Moved the lldb_private::Thread::RegisterCheckpoint into its own header file and it is now in the lldb_private namespace. Trimmed down the RegisterCheckpoint class to omit stuff that wasn't used (the stack ID).
Added a few new virtual methods to lldb_private::RegisterContext that allow subclasses to efficiently save/restore register states and changed the RegisterContextGDBRemote to take advantage of these new calls.
llvm-svn: 194621
Remove the --do-read option, and always provide a small dump of memory at each match spot
Add a --dump-offset (-o) option, to specify a byte offset from which to start dumping relative to the matching address
The real solution is to actually provide the format options found on "memory read" and use those as the key to actually printing memory upon each find
That, however, requires a little refactoring work, so put this in for now until I get a chance to do the required shuffling around of moving parts
llvm-svn: 194600
Implement a "memory find" command for LLDB
This is still fairly rough around the edges but works well enough for simple scenarios where a chunk of text or a number are to be found within a certain range of memory, as in
mem find `buffer` `buffer+0x1000` -s "me" -c 5 -r
llvm-svn: 194544
something; add a new ExtendedThreadList to Process where they can be retained
for the duration of a public stop.
<rdar://problem/15314068>
llvm-svn: 194367
something; add a new ExtendedThreadList to Process where they can be retained
for the duration of a public stop.
<rdar://problem/15314068>
llvm-svn: 194366
- removed all gaps from the g/G packets
- optimized registers for x86_64 to not send/receive xmm0-xmm15 as well as ymm0-ymm15, now we only send ymm0-15 and xmm0-15 are now pseudo regs
- Fixed x86_64 floating point register gaps
- Fixed x86_64 so that xmm8-xmm15 don't overlap with ymm0-ymm3. This could lead to bad values showing in the debugger and was due to bad register info structure contents
- Fixed i386 so we only send ymm0-ymm7 and xmm0-xmm7 are now pseudo regs.
- Fixed ARM register definitions to not have any gaps
- Fixed it so value registers and invalidation registers are specified using register names which avoid games we had to play with register numbering in the ARM plugin.
llvm-svn: 194302
Still working out some of the details of these classes but
I wanted to get the overall structure checked in.
<rdar://problem/15314068>
llvm-svn: 194245
llvm::ArrayRef of arguments rather than taking
a fixed number of possibly-NULL pointers to
arguments.
Also changed ClangFunction::GetThreadPlanToCallFunction
to take the address of the argument struct by value
instead of by reference, since it doesn't actually
modify the value passed into it.
llvm-svn: 194232
It completes the job of using EvaluateExpressionOptions consistently throughout
the inferior function calling mechanism in lldb begun in Greg's patch r194009.
It removes a handful of alternate calls into the ClangUserExpression/ClangFunction/ThreadPlanCallFunction which
were there for convenience. Using the EvaluateExpressionOptions removes the need for them.
Using that it gets the --debug option from Greg's patch to work cleanly.
It also adds another EvaluateExpressionOption to not trap exceptions when running expressions. You shouldn't
use this option unless you KNOW your expression can't throw beyond itself. This is:
<rdar://problem/15374885>
At present this is only available through the SB API's or python.
It fixes a bug where function calls would unset the ObjC & C++ exception breakpoints without checking whether
they were set by somebody else already.
llvm-svn: 194182
iterators for LLDB's container data structures.
Iterable abstracts over the backing data structure,
ignoring keys for maps for example. It also provides
locking as a service so that the code
for (ThreadSP thread_sp : process->Threads())
{
// ... use thread_sp
}
takes the appropriate locks once, without having to
do anything else.
The salient advantages of this system are:
- Much simpler and idiomatic loop code
- Lock once instead of each time an element is fetched
- Less boilerplate to produce the iterators
The intent is that Iterable will replace Get...AtIndex
in most places, and that ForEach(), which solves the
same problem in a less-idiomatic way, be phased out in
favor of this approach.
I've added Iterables to ThreadList, TypeList, and
Process (which is really just forwarding to ThreadList).
llvm-svn: 194159
Fixed the test case for "test/functionalities/exec/TestExec.py" on Darwin.
The issue was breakpoints were persisting and causing problems. When we exec, we need to clear out the process and target and start fresh with nothing and let the breakpoints populate themselves again. This patch correctly clears out the breakpoints and also flushes the process so that the objects (process/thread/frame) give out valid information.
llvm-svn: 194106
GetThreadOriginExtendedBacktraceTypeAtIndex methods to
SBProcess.
Add documentation for the GetQueueName and GetQueueID methods
to SBThread.
<rdar://problem/15314369>
llvm-svn: 194063
Instead of looking up registers by name, we use the generic ID when we can.
Also added code that creates an extra frame when running expressions by pushing the current PC and FP and then hooking up the FP backchain. This code is "#if 0" out for now until we can pair it with unwinder fixes.
llvm-svn: 194035
Fixed a case where on darwin, after recent compiler changes a few months ago, we could not execute dlopen() in an expression, or use "process load".
The issue was some compiler option default values changed. We now override these settings to get the old behavior back.
llvm-svn: 194012
Cleaned up ClangUserExpression::Evaluate() to have only one variant that takes a "const EvaluateExpressionOptions& options" instead of taking many arguments.
The "--debug" option is designed to allow you to debug your expression by stopping at the first instruction (it enables --ignore-breakpoints=true and --unwind-on-error=false) and allowing you to step through your JIT code. It needs to be more integrated with the thread plan, so I am checking this in so Jim Ingham can make it happen.
llvm-svn: 194009
at some point in the past. We may have nothing more than a pc value
for this type of stack frame -- hopefully we'll have a pc and a
stop_id so we can track module loads and unloads over time and
symbolicate the pc at the correct point in time.
Also add a flag to indicate if the CFA for the frame is available
(a bit different from a CFA of LLDB_INVALID_ADDRESS) and also an
overall setting to indicate whether this is a history stack frame
or not. A history stack frame may not have a CFA, it may not have
a register context, it may not have variables, it may not have a
frame pointer or a stack pointer.
<rdar://problem/15314068>
llvm-svn: 193987
pure virtual base class and made StackFrame a subclass of that. As
I started to build on top of that arrangement today, I found that it
wasn't working out like I intended. Instead I'll try sticking with
the single StackFrame class -- there's too much code duplication to
make a more complicated class hierarchy sensible I think.
llvm-svn: 193983
defines a protocol that all subclasses will implement. StackFrame
is currently the only subclass and the methods that Frame vends are
nearly identical to StackFrame's old methods.
Update all callers to use Frame*/Frame& instead of pointers to
StackFrames.
This is almost entirely a mechanical change that touches a lot of
the code base so I'm committing it alone. No new functionality is
added with this patch, no new subclasses of Frame exist yet.
I'll probably need to tweak some of the separation, possibly moving
some of StackFrame's methods up in to Frame, but this is a good
starting point.
<rdar://problem/15314068>
llvm-svn: 193907
In almost all cases, the misuse is about "%lu" being used instead of the correct "%zu" (even though these are compatible on 64-bit platforms in practice). There are even a couple of cases where "%ld" (ie., signed int) is used instead of "%zu", and one where "%lu" is used instead of "%" PRIu64.
Fixes bug #17551.
Patch by "/dev/humancontroller"
llvm-svn: 193832
FreeBSD includes the elftoolchain project's demangler in the base system.
It does not handle some unusual mangled names, so use the inlined
libcxxabi one.
llvm-svn: 193776
User-vended by-type formatters still would prevail on these hardcoded ones
For the time being, while the infrastructure is there, no such formatters exist
This can be useful for cases such as expanding vtables for C++ class pointers, when there is no clear cut notion of a typename matching, and the feature is low-level enough that it makes sense for the debugger core to be vending it
llvm-svn: 193724
Fixed the expression parser to be able to iterate across all function name matches that it finds when it is looking for the address of a function that the IR is looking for. Also taught it to deal with reexported symbols.
llvm-svn: 193716
Inlined a copy of cxa_demangle.cpp from:
http://llvm.org/svn/llvm-project/libcxxabi/trunk/src/cxa_demangle.cpp
For systems that don't have demangling built into the system, and for systems that don't want to use the version that is installed. Defining LLDB_USE_BUILTIN_DEMANGLER in your build system allows you to use the built in demangler. This setting is curently automatically enabled for Windows builds.
llvm-svn: 193708
Fixing a problem where ValueObject::GetPointeeData() would not accept "partial" valid reads (i.e. asking for 10 items and getting only 5 back)
While suboptimal, this situation is not a flat-out failure and could well be caused by legit scenarios, such as hitting a page boundary
Among others, this allows data formatters to print char* buffers allocated under libgmalloc
llvm-svn: 193704
One of the things that dynamic typing affects is the count of children a type has
Clear out the flag that makes us blindly believe the children count when a dynamic type change is detected
llvm-svn: 193663
Fix a crasher that would occur if one tried to read memory as characters of some size != 1, e.g.
x -f c -s 10 buffer
This commit tries to do the right thing and uses the byte-size as the number of elements, unless both are specified and the number of elements is != 1
In this latter case (e.g. x -f c -s 10 -c 3 buffer) one could multiply the two and read 30 characters, but it seems a stretch in mind reading.
llvm-svn: 193659
This commit reimplements the TypeImpl class (the class that backs SBType) in terms of a static,dynamic type pair
This is useful for those cases when the dynamic type of an ObjC variable can only be obtained in terms of an "hollow" type with no ivars
In that case, we could either go with the static type (+iVar information) or with the dynamic type (+inheritance chain)
With the new TypeImpl implementation, we try to combine these two sources of information in order to extract as much information as possible
This should improve the functionality of tools that are using the SBType API to do extensive dynamic type inspection
llvm-svn: 193564
Introduce a new boolean setting enable-auto-oneliner
This setting if set to false will force LLDB to not use the new compact one-line display
By default, one-line mode stays on, at least until we can be confident it works.
But now if it seriously impedes your workflow while it evolves/it works wonders but you still hate it, there's a way to turn it off
llvm-svn: 193450
Enrico Granata