facilitate the nice formatting of lambdas passed there. Suggested by
Chris during review of my lambda additions, and something I strongly
agree with.
llvm-svn: 202622
about a few constructs in C++11 that are worth starting off in
a consistent manner within the codebase.
This will be matched with a change to clang-format's LLVM style which
will switch the options to support C++11 and use these conventions.
llvm-svn: 202620
it interoperate (minimally) with std::unique_ptr<T>. This is part of my
plan to migrate LLVM to use std::unique_ptr with a minimal impact on
out-of-tree code.
Patch by Ahmed Charles with some minor cleanups (and bool casts) by me.
llvm-svn: 202608
The docs now build cleanly. Yay!
The following warnings were fixed:
/home/sean/pg/llvm/llvm/docs/HowToReleaseLLVM.rst:364: WARNING: Enumerated list ends without a blank line; unexpected unindent.
/home/sean/pg/llvm/llvm/docs/InAlloca.rst:: WARNING: document isn't included in any toctree
/home/sean/pg/llvm/llvm/docs/CodingStandards.rst:85: WARNING: Title underline too short.
Supported C++11 Language and Library Features
-------------------------------------------
/home/sean/pg/llvm/llvm/docs/CodingStandards.rst:85: WARNING: Title underline too short.
Supported C++11 Language and Library Features
-------------------------------------------
/home/sean/pg/llvm/llvm/docs/GettingStarted.rst:185: WARNING: Explicit markup ends without a blank line; unexpected unindent.
/home/sean/pg/llvm/llvm/docs/GettingStarted.rst:565: WARNING: Explicit markup ends without a blank line; unexpected unindent.
/home/sean/pg/llvm/llvm/docs/GettingStarted.rst:567: WARNING: Block quote ends without a blank line; unexpected unindent.
llvm-svn: 202603
This generalizes the code to eliminate extra truncs/exts around i1 bit
operations to also do the same on PPC64 for i32 bit operations. This eliminates
a fairly prevalent code wart:
int foo(int a) {
return a == 5 ? 7 : 8;
}
On PPC64, because of the extension implied by the ABI, this would generate:
cmplwi 0, 3, 5
li 12, 8
li 4, 7
isel 3, 4, 12, 2
rldicl 3, 3, 0, 32
blr
where the 'rldicl 3, 3, 0, 32', the extension, is completely unnecessary. At
least for the single-BB case (which is all that the DAG combine mechanism can
handle), this unnecessary extension is no longer generated.
llvm-svn: 202600
to the build being C++11.
There is clearly still plenty of simplification than can be done here by
using standard type traits instead of rolling our own in many places.
llvm-svn: 202586
on the fact that we now build in C++11 mode with modern compilers. This
should flush out any issues. If the build bots are happy with this, I'll
GC all the code for coping without R-value references.
llvm-svn: 202574
lib/Support/RWMutex.cpp contains an implementation of RWMutex that
uses pthread_rwlock, but when pthread_rwlock is not available (such as
under NaCl, when using newlib), it silently falls back to using the
no-op definition in lib/Support/Unix/RWMutex.inc, which is not
thread-safe.
Fix this case to be thread-safe by using a normal mutex.
Differential Revision: http://llvm-reviews.chandlerc.com/D2892
llvm-svn: 202570
baseline is now C++11, and we unconditionally add -std=c++11 to the
flags.
This has the dim potential to break some non-GNU-compatible compiler (in
terms of -std flags) using the makefiles, but those makefiles are
littered with GNU-style compile flags so it would be very surprising to
me for it to actually happen in practice. As always, do let me know if
there is a toolchain you're using where this doesn't work, and I'll be
watching the bots.
llvm-svn: 202569
The switch has been thrown. While I'm still watching for any failures or
problems with this, the documentation can go ahead and move forward.
llvm-svn: 202566
Inside iterate, we scan backwards then scan forwards in a loop. When iteration
is not zero, the last node was just updated so we can skip it. But when
iteration is zero, we can't skip the last node.
For the testing case, fixing this will save a spill and move register copies
from hot path to cold path.
llvm-svn: 202557
The previous PBQP solver was very robust but consumed a lot of memory,
performed a lot of redundant computation, and contained some unnecessarily tight
coupling that prevented experimentation with novel solution techniques. This new
solver is an attempt to address these shortcomings.
Important/interesting changes:
1) The domain-independent PBQP solver class, HeuristicSolverImpl, is gone.
It is replaced by a register allocation specific solver, PBQP::RegAlloc::Solver
(see RegAllocSolver.h).
The optimal reduction rules and the backpropagation algorithm have been extracted
into stand-alone functions (see ReductionRules.h), which can be used to build
domain specific PBQP solvers. This provides many more opportunities for
domain-specific knowledge to inform the PBQP solvers' decisions. In theory this
should allow us to generate better solutions. In practice, we can at least test
out ideas now.
As a side benefit, I believe the new solver is more readable than the old one.
2) The solver type is now a template parameter of the PBQP graph.
This allows the graph to notify the solver of any modifications made (e.g. by
domain independent rules) without the overhead of a virtual call. It also allows
the solver to supply policy information to the graph (see below).
3) Significantly reduced memory overhead.
Memory management policy is now an explicit property of the PBQP graph (via
the CostAllocator typedef on the graph's solver template argument). Because PBQP
graphs for register allocation tend to contain many redundant instances of
single values (E.g. the value representing an interference constraint between
GPRs), the new RASolver class uses a uniquing scheme. This massively reduces
memory consumption for large register allocation problems. For example, looking
at the largest interference graph in each of the SPEC2006 benchmarks (the
largest graph will always set the memory consumption high-water mark for PBQP),
the average memory reduction for the PBQP costs was 400x. That's times, not
percent. The highest was 1400x. Yikes. So - this is fixed.
"PBQP: No longer feasting upon every last byte of your RAM".
Minor details:
- Fully C++11'd. Never copy-construct another vector/matrix!
- Cute tricks with cost metadata: Metadata that is derived solely from cost
matrices/vectors is attached directly to the cost instances themselves. That way
if you unique the costs you never have to recompute the metadata. 400x less
memory means 400x less cost metadata (re)computation.
Special thanks to Arnaud de Grandmaison, who has been the source of much
encouragement, and of many very useful test cases.
This new solver forms the basis for future work, of which there's plenty to do.
I will be adding TODO notes shortly.
- Lang.
llvm-svn: 202551
bots when using the standard library facilities. The missing pieces here
aren't always in useful discreet chunks.
Fortunately, the missing pieces are few and far between, and we can
emulate most of them in our headers as needed.
Based on feedback from Lang and Dave.
llvm-svn: 202548
systems have the default as C++11, but retain the ability to build with
C++98.
Again, please restrain your enthusiasm a bit in case this needs to be
reverted. =]
llvm-svn: 202546
Now, please don't get too excited. I've just toggled the default to suss
out the last remaining bot problems. This does *not* mean we can all go
write lots of C++11 code yet. I at least want to let the dust settle
from the bots first.
llvm-svn: 202542
during the finalization for CGDebugInfo in clang we would RAUW
a type and it would result in a corrupted MDNode for an
imported declaration.
Testcase pending as reducing has been difficult.
llvm-svn: 202540
Tools that use the CommandLine library currently exit with an error
when invoked with -version or -help. This is unusual and non-standard,
so we'll fix them to exit successfully instead.
I don't expect that anyone relies on the current behaviour, so this
should be a fairly safe change.
llvm-svn: 202530
This centralizes the Makefile handling of -install_name and -rpath. It also
moves the cmake build to using @rpath. The reason being that libclang needs it,
and it works for everything else.
A followup patch will move clang to using this and then there will be a single
point to edit to support other systems.
llvm-svn: 202499
A lot of this is writing down common knowledge and things often
communicated on mailing lists and in discussions. It could live in the
Programmer's Manual alternatively, but that felt slightly less
well-fitting.
It also includes (and was motivated by) the section on the relevant
language standards for LLVM and the specific features that will be
enabled with the switch to C++11.
With this, all of the documentation for the C++11 switch is, I think, in
place. I plan to flip the switch RSN. =]
llvm-svn: 202497
X86Operand is extracted into individual header, because it allows to create an
arbitrary memory operand and append it to MCInst. It'll be reused in X86 inline
assembly instrumentation.
Patch by Yuri Gorshenin.
llvm-svn: 202496
standards.
It claims the document intentionally doesn't give fixed standards for
brace placement or spacing, and then the document goes on to do
precisely that in several places. Instead, try to highlight that even
these rules are simply *guidance* which may be trumped by some other
circumstance or the local conventions of code.
I'm not trying to change the thrust of this part of the document, and if
folks think this does so, I'm happy to re-wordsmith it. I just don't
want it to be so self-contradicting.
llvm-svn: 202495
a more modern host C++ toolchain for Linux distros where folks sometimes
don't have a good option to get one as part of their system.
This is a first cut, so feedback, testing, and suggestions are very,
very welcom. This is one of the last real documentation changes that was
specifically requested prior to switching LLVM and Clang to build in
C++11 mode by default.
llvm-svn: 202486
* Align targets of indirect jumps to instruction bundle boundaries (in MI layer).
* Add masking instructions before indirect jumps (in MC layer).
Differential Revision: http://llvm-reviews.chandlerc.com/D2847
llvm-svn: 202479
A 'remark' is information that is not an error or a warning, but rather some
additional information provided to the user. In contrast to a 'note' a 'remark'
is an independent diagnostic, whereas a 'note' always depends on another
diagnostic.
A typical use case for remark nodes is information provided to the user, e.g.
information provided by the vectorizer about loops that have been vectorized.
llvm-svn: 202474
The PPC isel instruction can fold 0 into the first operand (thus eliminating
the need to materialize a zero-containing register when the 'true' result of
the isel is 0). When the isel is fed by a bit register operation that we can
invert, do so as part of the bit-register-operation peephole routine.
llvm-svn: 202469
The current COFF unwind printer tries to print SEH handler function names,
assuming that it can always find function names in string table. It crashes
if file being read has no symbol table (i.e. executable).
With this patch, llvm-objdump prints SEH handler's RVA if there's no symbol
table entry for that RVA.
llvm-svn: 202466
The CR bit tracking code broke PPC/Darwin; trying to get it working again...
(the darwin11 builder, which defaults to the darwin ABI when running PPC tests,
asserted when running test/CodeGen/PowerPC/inverted-bool-compares.ll)
llvm-svn: 202459
Chandler Carruth