This patch tried to address the following use case.
. bcc (https://github.com/iovisor/bcc) utilizes llvm JIT to
compile for BTF target.
. with -g, .BTF and .BTF.ext sections (BPF debug info)
will be generated by LLVM.
. .BTF does not have relocations and .BTF.ext has some
relocations.
. With ProcessAllSections, .BTF.ext is loaded by JIT dynamic linker
and is available to application. But .BTF is not loaded.
The bcc application needs both .BTF.ext and .BTF for debugging
purpose, and .BTF is not loaded. This patch addressed this issue
by iterating over all sections and loading any missing
sections, after symbol/relocation processing in loadObjectImpl().
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D55943
llvm-svn: 352432
Previously, MemoryBlock automatically extends a requested buffer size to a
multiple of page size because (I believe) doing it was thought to be harmless
and with that you could get more memory (on average 2KiB on 4KiB-page systems)
"for free".
That programming interface turned out to be error-prone. If you request N
bytes, you usually expect that a resulting object returns N for `size()`.
That's not the case for MemoryBlock.
Looks like there is only one place where we take the advantage of
allocating more memory than the requested size. So, with this patch, I
simply removed the automatic size expansion feature from MemoryBlock
and do it on the caller side when needed. MemoryBlock now always
returns a buffer whose size is equal to the requested size.
Differential Revision: https://reviews.llvm.org/D56941
llvm-svn: 351916
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This will allow other utilities (including a future RuntimeDyld replacement) to
use these types without pulling in the major Core types (JITDylib, etc.).
llvm-svn: 351138
MIPS `jr` instruction uses a delay-slot. To escape execution of
arbitrary instruction we should either fill the delay-slot by `nop`
instruction or swap `jr` instruction and logically preceding
instruction. This fix implements the second method to generate a bit
more effective code.
llvm-svn: 351001
MIPS ABI states that every function must be called through jalr $t9. In
other words, a function expect that t9 register points to the beginning
of its code. A function uses this register to calculate offset to the
Global Offset Table and save it to the `gp` register.
```
lui $gp, %hi(_gp_disp)
addiu $gp, %lo(_gp_disp)
addu $gp, $gp, $t9
```
If `t9` and as a result `$gp` point to the wrong place the following code
loads incorrect value from GOT and passes control to invalid code.
```
lw $v0,%call16(foo)($gp)
jalr $t9
```
OrcMips32 and OrcMips64 writeResolverCode methods pass control to the
resolved address, but do not setup `$t9` before the call. The `t9` holds
value of the beginning of `resolver` code so any attempts to call
routines via GOT failed.
This change fixes the problem. The `OrcLazy/hidden-visibility.ll` test
starts to pass correctly. Before the change it fails on MIPS because the
`exitOnLazyCallThroughFailure` called from the resolver code could not
call libc routine `exit` via GOT.
Differential Revision: http://reviews.llvm.org/D56058
llvm-svn: 351000
That is, remove many of the calls to Type::getNumContainedTypes(),
Type::subtypes(), and Type::getContainedType(N).
I'm not intending to remove these accessors -- they are
useful/necessary in some cases. However, removing the pointee type
from pointers would potentially break some uses, and reducing the
number of calls makes it easier to audit.
llvm-svn: 350835
lldb on Windows uses the ExecutionEngine for expression evaluation
and hits the llvm_unreachable due to this relocation. Thus, implement
the relocation and add a test to verify it's function.
llvm-svn: 348904
This patch renames both methods (NotifyObjectEmitted -> notifyObjectLoaded, and
NotifyObjectFreed -> notifyObjectFreed), adds an abstract "ObjectKey" (uint64_t)
parameter to notifyObjectLoaded, and replaces the ObjectFile parameter for
notifyObjectFreed with an ObjectKey. Using an ObjectKey to track identify
events, rather than a reference to the ObjectFile, allows us to free the
ObjectFile after notifyObjectLoaded is called, saving memory.
https://reviews.llvm.org/D53773
llvm-svn: 348223
In a lot of places an empty string was passed as the ErrorBanner to
logAllUnhandledErrors. This patch makes that argument optional to
simplify the call sites.
llvm-svn: 346604
Doesn't build on Windows. The call to 'lookup' is ambiguous. Clang and
MSVC agree, anyway.
http://lab.llvm.org:8011/builders/clang-x64-windows-msvc/builds/787
C:\b\slave\clang-x64-windows-msvc\build\llvm.src\unittests\ExecutionEngine\Orc\CoreAPIsTest.cpp(315): error C2668: 'llvm::orc::ExecutionSession::lookup': ambiguous call to overloaded function
C:\b\slave\clang-x64-windows-msvc\build\llvm.src\include\llvm/ExecutionEngine/Orc/Core.h(823): note: could be 'llvm::Expected<llvm::JITEvaluatedSymbol> llvm::orc::ExecutionSession::lookup(llvm::ArrayRef<llvm::orc::JITDylib *>,llvm::orc::SymbolStringPtr)'
C:\b\slave\clang-x64-windows-msvc\build\llvm.src\include\llvm/ExecutionEngine/Orc/Core.h(817): note: or 'llvm::Expected<llvm::JITEvaluatedSymbol> llvm::orc::ExecutionSession::lookup(const llvm::orc::JITDylibSearchList &,llvm::orc::SymbolStringPtr)'
C:\b\slave\clang-x64-windows-msvc\build\llvm.src\unittests\ExecutionEngine\Orc\CoreAPIsTest.cpp(315): note: while trying to match the argument list '(initializer list, llvm::orc::SymbolStringPtr)'
llvm-svn: 345078
In the new scheme the client passes a list of (JITDylib&, bool) pairs, rather
than a list of JITDylibs. For each JITDylib the boolean indicates whether or not
to match against non-exported symbols (true means that they should be found,
false means that they should not). The MatchNonExportedInJD and MatchNonExported
parameters on lookup are removed.
The new scheme is more flexible, and easier to understand.
This patch also updates JITDylib search orders to be lists of (JITDylib&, bool)
pairs to match the new lookup scheme. Error handling is also plumbed through
the LLJIT class to allow regression tests to fail predictably when a lookup from
a lazy call-through fails.
llvm-svn: 345077
Non-loaded sections (whose unused load-address defaults to zero) should not
be taken into account when calculating ImageBase, or ImageBase will be
incorrectly set to 0.
Patch by Andrew Scheidecker. Thanks Andrew!
https://reviews.llvm.org/D51343
+ // The Sections list may contain sections that weren't loaded for
+ // whatever reason: they may be debug sections, and ProcessAllSections
+ // is false, or they may be sections that contain 0 bytes. If the
+ // section isn't loaded, the load address will be 0, and it should not
+ // be included in the ImageBase calculation.
llvm-svn: 344995
Otherwise we can end up with a data-race when linking concurrently.
This should fix an intermittent failure in the multiple-compile-threads-basic.ll
testcase.
llvm-svn: 344956
MaterializationResponsibility.
VModuleKeys are intended to enable selective removal of modules from a JIT
session, however for a wide variety of use cases selective removal is not
needed and introduces unnecessary overhead. As of this commit, the default
constructed VModuleKey value is reserved as a "do not track" value, and
becomes the default when adding a new module to the JIT.
This commit also changes the propagation of VModuleKeys. They were passed
alongside the MaterializationResponsibity instance in XXLayer::emit methods,
but are now propagated as part of the MaterializationResponsibility instance
itself (and as part of MaterializationUnit when stored in a JITDylib).
Associating VModuleKeys with MaterializationUnits in this way should allow
for a thread-safe module removal mechanism in the future, even when a module
is in the process of being compiled, by having the
MaterializationResponsibility object check in on its VModuleKey's state
before commiting its results to the JITDylib.
llvm-svn: 344643
This commit adds a 'Legacy' prefix to old ORC layers and utilities, and removes
the '2' suffix from the new ORC layers. If you wish to continue using the old
ORC layers you will need to add a 'Legacy' prefix to your classes. If you were
already using the new ORC layers you will need to drop the '2' suffix.
The legacy layers will remain in-tree until the new layers reach feature
parity with them. This will involve adding support for removing code from the
new layers, and ensuring that performance is comperable.
llvm-svn: 344572
The new name is a better fit: This class does not actually spawn any new
threads for compilation, it is just safe to call from multiple threads
concurrently.
The "Simple" part of the name did not convey much either, so it was
dropped.
llvm-svn: 344567
Renames:
JITDylib's setFallbackDefinitionGenerator method to setGenerator.
DynamicLibraryFallbackGenerator class to DynamicLibrarySearchGenerator.
ReexportsFallbackDefinitionGenerator to ReexportsGenerator.
llvm-svn: 344489
This adds two arguments to the main ExecutionSession::lookup method:
MatchNonExportedInJD, and MatchNonExported. These control whether and where
hidden symbols should be matched when searching a list of JITDylibs.
A similar effect could have been achieved by filtering search results, but
this would have involved materializing symbol definitions (since materialization
is triggered on lookup) only to throw the results away, among other issues.
llvm-svn: 344467
rather than require them to have been promoted before being passed in.
Dropping this precondition is better for layer composition (CompileOnDemandLayer
was the only one that placed pre-conditions on the modules that could be added).
It also means that the promoted private symbols do not show up in the target
JITDylib's symbol table. Instead, they are confined to the hidden implementation
dylib that contains the actual definitions.
For the 403.gcc testcase this cut down the public symbol table size from ~15,000
symbols to ~4000, substantially reducing symbol dependence tracking costs.
llvm-svn: 344078
Symbols can be removed provided that all are present in the JITDylib and none
are currently in the materializing state. On success all requested symbols are
removed. On failure an error is returned and no symbols are removed.
llvm-svn: 343928
(1) Adds comments for the API.
(2) Removes the setArch method: This is redundant: the setArchStr method on the
triple should be used instead.
(3) Turns EmulatedTLS on by default. This matches EngineBuilder's behavior.
llvm-svn: 343423
CompileOnDemandLayer2 now supports user-supplied partition functions (the
original CompileOnDemandLayer already supported these).
Partition functions are called with the list of requested global values
(i.e. global values that currently have queries waiting on them) and have an
opportunity to select extra global values to materialize at the same time.
Also adds testing infrastructure for the new feature to lli.
llvm-svn: 343396
This makes it available for use in IRTransformLayer2::TransformFunction
instances (since a const MaterializationResponsibility& parameter was
added in r343365).
llvm-svn: 343367
(1) A const accessor for the LLVMContext held by a ThreadSafeContext.
(2) A const accessor for the ThreadSafeModules held by an IRMaterializationUnit.
(3) A const MaterializationResponsibility reference to IRTransformLayer2's
transform function. This makes IRTransformLayer2 useful for JIT debugging
(since it can inspect JIT state through the responsibility argument) as well
as program transformations.
llvm-svn: 343365
(1) Print debugging output under a session lock to avoid garbled messages when
compiling on multiple threads.
(2) Name MaterializationUnits, add an ostream operator for them, and so they can
be easily referenced in debugging output, and have that ostream operator
optionally print code/data/hidden symbols provided by that materialization unit
based on command line options.
llvm-svn: 343323
flag to true in LLJIT when running in multithreaded mode.
The IRLayer::setCloneToNewContextOnEmit method sets a flag within the IRLayer
that causes modules added to that layer to be moved to a new context (by
serializing to/from a memory buffer) when they are emitted. This allows modules
that were all loaded on the same context to be compiled in parallel.
llvm-svn: 343266
one SymbolLinkagePromoter utility.
SymbolLinkagePromoter renames anonymous and private symbols, and bumps all
linkages to at least global/hidden-visibility. Modules whose symbols have been
promoted by this utility can be decomposed into sub-modules without introducing
link errors. This is used by the CompileOnDemandLayer to extract single-function
modules for lazy compilation.
llvm-svn: 343257
Modifies lit to add a 'thread_support' feature that can be used in lit test
REQUIRES clauses. The thread_support flag is set if -DLLVM_ENABLE_THREADS=ON
and unset if -DLLVM_ENABLE_THREADS=OFF. The lit flag is used to disable the
multiple-compile-threads-basic.ll testcase when threading is disabled.
llvm-svn: 343122
Yonghong Song