FailedISel MachineFunction property is part of the CodeGen pipeline
state as much as every other property, notably, Legalized,
RegBankSelected, and Selected. Let's make that part of the state also
serializable / de-serializable, so if GlobalISel aborts on some of the
functions of a large module, but not the others, it could be easily seen
and the state of the pipeline could be maintained through llc's
invocations with -stop-after / -start-after.
To make MIR printable and generally to not to break it too much too
soon, this patch also defers cleaning up the vreg -> LLT map until
ResetMachineFunctionPass.
To make MIR with FailedISel: true also machine verifiable, machine
verifier is changed so it treats a MIR-module as non-regbankselected and
non-selected if there is FailedISel property set.
Reviewers: qcolombet, ab
Reviewed By: dsanders
Subscribers: javed.absar, rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42877
llvm-svn: 326343
Emulated TLS is enabled by llc flag -emulated-tls,
which is passed by clang driver.
When llc is called explicitly or from other drivers like LTO,
missing -emulated-tls flag would generate wrong TLS code for targets
that supports only this mode.
Now use useEmulatedTLS() instead of Options.EmulatedTLS to decide whether
emulated TLS code should be generated.
Unit tests are modified to run with and without the -emulated-tls flag.
Differential Revision: https://reviews.llvm.org/D42999
llvm-svn: 326341
Summary:
Expressions of the form x < 0 ? 0 : x; and x < -1 ? -1 : x can be lowered using bit-operations instead of branching or conditional moves
In thumb-mode this results in a two-instruction sequence, a shift followed by a bic or or while in ARM/thumb2 mode that has flexible second operand the shift can be folded into a single bic/or instructions. In most cases this results in smaller code and possibly less branches, and in no case larger than before.
Patch by Martin Svanfeldt
Reviewers: fhahn, pbarrio, rogfer01
Reviewed By: pbarrio, rogfer01
Subscribers: chrib, yroux, eugenis, efriedma, rogfer01, aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42574
llvm-svn: 326333
Also, rename 'foldOpWithConstantIntoOperand' because that's annoyingly
vague. The constant check is redundant in some cases, but it allows
removing duplication for most of the calls.
llvm-svn: 326329
Summary:
Some targets does not support labels inside debug sections, but support
references in form `section +|- offset`. Patch adds initial support
for this. Also, this patch disables emission of all additional debug
sections that may have labels inside of it (like pub sections and
string tables).
Reviewers: probinson, echristo
Subscribers: JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D43627
llvm-svn: 326328
The MIPS backend has inconsistent usage of instruction predicates
for assembly and code generation. The issue arises from supporting three
encodings, two (MIPS and microMIPS) of which have a near 1:1 instruction
mapping across ISA revisions and a third encoding with a more restricted
set of instructions (MIPS16e).
To enforce consistent usage, each of the ISA_* adjectives has (or will
have) the relevant encoding attached to it along the relevant ISA revision
where the instruction is defined.
Each instruction, pattern or alias will then have the correct ISA adjective
attached to it, and the base instruction description classes will have any
predicates relating to ISA encoding or revision removed.
Pseudo instructions will also be guarded for the encoding or ABI that they are
supported in.
Finally, the hasStandardEncoding() / inMicroMipsMode() / inMips16Mode() methods
of MipsSubtarget will be changed such that only one can be true at any one time.
The result of this is that code generation and assembly will produce the
correct encoding up front, while code generated from pseudo instructions
and other inserted sequences of instructions will be able to rely on the mapping
tables to produce the correct encoding. This should fix numerous bugs where
the result 'happens' to be correct but has edge cases where microMIPS and MIPS
have subtle differences (e.g. microMIPSR6 using 'j', 'jal' instructions.)
This patch starts the process by changing most of the ISA adjectives to make
use of the EncodingPredicate member of PredicateControl. Follow on patches
will annotate instructions with their correct ISA adjective and eliminate
the usage of "let Predicates = [..]", "let AdditionalPredicates = [..]" and
"isCodeGenOnly = 1" in the cases where it was used to control instruction
availability.
Contributions from Nitesh Jain.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D41434
llvm-svn: 326322
Summary:
Fix a bug in MergeICmp that can lead to a BCECmp block being processed more than once and eventually lead to a broken LLVM module.
The problem is that if the non-constant value is not produced by the last block, the producer will be processed once when the its parent block
is processed and second time when the last block is processed.
We end up having 2 same BCECmpBlock in the merge queue. And eventually lead to a broken LLVM module.
Reviewers: courbet, davide
Reviewed By: courbet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43825
llvm-svn: 326318
There are many instruction ctors that call the setName method of the Value base class, which can throw a bad_alloc exception in OOM situations.
In such situations special User delete operators are called which are not implemented yet.
Example:
Lets look at the construction of a CallInst instruction during IR generation:
static CallInst *Create(FunctionType *Ty, Value *Func, ArrayRef<Value *> Args, .. ){
...
return new (TotalOps, DescriptorBytes) CallInst(Ty, Func, Args, Bundles, NameStr, InsertBefore);
}
CallInst::CalInst(Value* Func, ...) {
...
Op<-1>() = Func;
....
setName(name); // throws
...
}
Op<-1>() returns a reference to a Use object of the CallInst instruction and the operator= inserts this use object into the UseList of Func.
The same object is removed from that UseList by calling the User::operator delete If the CallInst object is deleted.
Since setName can throw a bad_alloc exception (if LLVM_ENABLE_EXCEPTIONS is switched on), the unwind chain runs into assertions ("Constructor throws?") in
special User::operator deletes operators:
operator delete(void* Usr, unsigned)
operator delete(void* Usr, unsigned, bool)
This situation can be fixed by simlpy calling the User::operator delete(void*) in these unimplemented methods.
To ensure that this additional call succeeds all information that is necessary to calculate the storage pointer from the Usr address
must be restored in the special case that a sublass has changed this information, e.g. GlobalVariable can change the NumberOfOperands.
Reviewd by: rnk
Differential Revision: https://reviews.llvm.org/D42731
llvm-svn: 326316
Removes verifyDomTree, using assert(verify()) everywhere instead, and
changes verify a little to always run IsSameAsFreshTree first in order
to print good output when we find errors. Also adds verifyAnalysis for
PostDomTrees, which will allow checking of PostDomTrees it the same way
we check DomTrees and MachineDomTrees.
Differential Revision: https://reviews.llvm.org/D41298
llvm-svn: 326315
An extract_element where the result type is larger than the scalar element type is semantically an any_extend of from the scalar element type to the result type. If we expect zeroes in the upper bits of the i8/i32 we need to mae sure those zeroes are explicit in the DAG.
For these cases the best way to accomplish this is use an insert_subvector to pad zeroes to the upper bits of the v1i1 first. We extend to either v16i1(for i32) or v8i1(for i8). Then bitcast that to a scalar and finish with a zero_extend up to i32 if necessary. We can't extend past v16i1 because that's the largest mask size on KNL. But isel is smarter enough to know that a zext of a bitcast from v16i1 to i16 can use a KMOVW instruction. The insert_subvectors will be dropped during isel because we can determine that the producing instruction already zeroed the upper bits of the k-register.
llvm-svn: 326308
While the description for the instruction does mention OR, its talking about how the individual classification test results are ORed together.
The incoming mask is used as a zeroing write mask. If the bit is 1 the classification is written to the output. The bit is 0 the output is 0. This equivalent to an AND.
Here is pseudocode from the intrinsics guide
FOR j := 0 to 1
i := j*64
IF k1[j]
k[j] := CheckFPClass_FP64(a[i+63:i], imm8[7:0])
ELSE
k[j] := 0
FI
ENDFOR
k[MAX:2] := 0
llvm-svn: 326306
Some of the update_*_test_checks regexes have been moved into a
library, so we might as well use them in update_mir_test_checks.
Also includes minor bugfixes to the regexes that are there so we
don't regress update_mir_test_checks
llvm-svn: 326288
Since vregs are printed in the instruction stream now, checking the
vreg block is always redundant. Remove the temporary feature that
allowed us to do that.
This reverts r316134
llvm-svn: 326284
Neither the linker nor the runtime need this information
anymore. We were originally using this to model BSS size
but the plan is now to use the segment metadata to allow
for BSS segments.
Differential Revision: https://reviews.llvm.org/D41366
llvm-svn: 326267
Absence of memory operands is treated as "aliasing everything", so
dropping them is sufficient.
Recommit r326256 with a fixed testcase.
llvm-svn: 326262
Qualifiers on a pointer or reference type may apply to either the
pointee or the pointer itself. Consider 'const char *' and 'char *
const'. In the first example, the pointee data may not be modified
without casts, and in the second example, the pointer may not be updated
to point to new data.
In the general case, qualifiers are applied to types with LF_MODIFIER
records, which support the usual const and volatile qualifiers as well
as the __unaligned extension qualifier.
However, LF_POINTER records, which are used for pointers, references,
and member pointers, have flags for qualifiers applying to the
*pointer*. In fact, this is the only way to represent the restrict
qualifier, which can only apply to pointers, and cannot qualify regular
data types.
This patch causes LLVM to correctly fold 'const' and 'volatile' pointer
qualifiers into the pointer record, as well as adding support for
'__restrict' qualifiers in the same place.
Based on a patch from Aaron Smith
Differential Revision: https://reviews.llvm.org/D43060
llvm-svn: 326260
When attempting to compile the following Objective-C++ code with
CodeView debug info:
void (^b)(void) = []() {};
The generated debug metadata contains a structure like the following:
!43 = !DICompositeType(tag: DW_TAG_structure_type, name: "__block_literal_1", scope: !6, file: !6, line: 1, size: 168, elements: !44)
!44 = !{!45, !46, !47, !48, !49, !52}
...
!52 = !DIDerivedType(tag: DW_TAG_member, scope: !6, file: !6, line: 1, baseType: !53, size: 8, offset: 160, flags: DIFlagPublic)
!53 = !DIDerivedType(tag: DW_TAG_const_type, baseType: !54)
!54 = !DICompositeType(tag: DW_TAG_class_type, file: !6, line: 1, flags: DIFlagFwdDecl)
Note that the member node (!52) is unnamed, but rather than pointing to
a DICompositeType directly, it points to a DIDerivedType with tag
DW_TAG_const_type, which then points to the DICompositeType. However,
the CodeView assembly printer currently assumes that the base type for
an unnamed member will always be a DICompositeType, and attempts to
perform that cast, which triggers an assertion failure, since in this
case the base type is actually a DIDerivedType, not a DICompositeType
(and we would have to get the base type of the DIDerivedType to reach
the DICompositeType). I think the debug metadata being generated by the
frontend is correct (or at least plausible), and the CodeView printer
needs to handle this case.
This patch teaches the CodeView printer to unwrap any qualifier types.
The qualifiers are just dropped for now. Ideally, they would be applied
to the added indirect members instead, but this occurs infrequently
enough that adding the logic to handle the qualifiers correctly isn't
worth it for now. A FIXME is added to note this.
Additionally, Reid pointed out that the underlying assumption that an
unnamed member must be a composite type is itself incorrect and may not
hold for all frontends. Therefore, after all qualifiers have been
stripped, check if the resulting type is in fact a DICompositeType and
just return if it isn't, rather than assuming the type and crashing if
that assumption is violated.
Differential Revision: https://reviews.llvm.org/D43803
llvm-svn: 326255
This is similar to what's done in computeKnownBits and computeSignBits. Don't do anything fancy just collect information valid for any element.
Differential Revision: https://reviews.llvm.org/D43789
llvm-svn: 326237
We were always setting the block alignment to 2 bytes in Thumb mode
and 4-bytes in ARM mode (r325754, and r325012), but this could cause
reducing the block alignment when it already had been aligned (e.g.
in Thumb mode when the block is a CPE that was already 4-byte aligned).
Patch by Momchil Velikov, I've only added a test.
Differential Revision: https://reviews.llvm.org/D43777
llvm-svn: 326232
Following DW_AT_sibling attributes completely defeats the pruning pass.
Although clang doesn't generate the DW_AT_sibling attribute we should
still handle it correctly.
Differential revision: https://reviews.llvm.org/D43439
llvm-svn: 326231
These tables add 3000 lines to X86InstrInfo.cpp. And if we ever manage to auto generate them they'll be a separate file anyway.
Differential Revision: https://reviews.llvm.org/D43806
llvm-svn: 326225
This is a slight reduction of one of the benchmarks
that suffered with D43079. Cost model changes should
not cause this test to remain scalarized.
llvm-svn: 326221
This is a slight reduction of one of the benchmarks
that suffered with D43079. Cost model changes should
not cause this test to remain scalarized.
llvm-svn: 326217
Currently when abort is enabled, we get a diagnostic saying "Fallback
path used .... " and the program terminates. To actually figure out what
the reason is, we need to run again with another verbose argument
"-pass-remarks-missed=gisel". Instead, when we are going to abort,
we might as well print expensive remarks.
https://reviews.llvm.org/D43796
llvm-svn: 326215
Re-enable commit r323991 now that r325931 has been committed to make
MachineOperand::isRenamable() check more conservative w.r.t. code
changes and opt-in on a per-target basis.
llvm-svn: 326208
Summary:
Since r325479 the DataLayout includes a program address space. However, it
is not possible to use `call %foo` if foo is a `i8(...) addrspace(200)` and
the DataLayout specifies address space 200 as the address space for functions.
With this change the IR parser will still accept variables in the program
address space as well as address space 0 for call and invoke functions.
Reviewers: pcc, arsenm, bjope, dylanmckay, theraven
Reviewed By: dylanmckay
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43645
llvm-svn: 326188
Add test that verifies that we don't follow DWARF values with a
reference form class, such as DW_AT_sibling.
Since clang doesn't generate the latter attribute, we added a PowerPC
test generated on an old PowerBook G4. (Thanks Adrian!)
llvm-svn: 326183
Until this patch, only `powerpc` and `ppc32` were recognized as valid
PowerPC 32-bit architectures in a target triple. This was incompatible
with the triple `ppc-apple-darwin` as returned for libObject. I found
out about this when working on a test case using a binary generated on
an old PowerBook G4.
We had the choice of either fix this in the Mach-O object parser or
in the Triple implementation. I chose the latter because it feels like
the most canonical place.
Differential revision: https://reviews.llvm.org/D43760
llvm-svn: 326182
In case we update a ValuePHI node created earlier, we could update it
based on a different OpPHI which could be in a different block.
We need to update the TempToBlock mapping reflecting the new block,
otherwise we would end up placing the new phi node in a wrong block.
This problem is exposed by the test case in
https://bugs.llvm.org/show_bug.cgi?id=36504.
This patch fixes a slightly simpler problem than in the bug report. In
the bug's re-producer, the additional problem is that we are re-using a
ValuePHI node with to few incoming values for the new OpPHI. If this
patch makes sense, I will follow it up with a patch that creates a new
PHI node if the existing PHI node has a different number of incoming
values.
Reviewers: davide, dberlin
Reviewed By: dberlin
Differential Revision: https://reviews.llvm.org/D43770
llvm-svn: 326181
Since getNode() might not always return the requsted opcode, for instance if
called with (ISD::AND, -1) arguments, there should be a check so that
SelectCode() is only called when appropriate.
Review: Ulrich Weigand
llvm-svn: 326178
The only cases I can come up with where this invalidation needs to
happen is when there's a deletion somewhere. If we find more creative
test-cases, we can probably go with another approach mentioned on
PR36529.
Fixes PR36529.
llvm-svn: 326177
It appears that there were many cases where we were directly (through
templates) calling the dtor of MemoryAccess, which is conceptually an
abstract class.
This hasn't been a problem, since the data members of all of the
subclasses of MemoryAccess have been POD. I'm planning on changing that.
:)
llvm-svn: 326175
Set default value for IgnoreOtherLoops of SCEVInitRewriter::rewrite to true
to be consistent with SCEVPostIncRewriter which does not have this parameter
but behaves as it would be true.
This is follow up for rL326067.
llvm-svn: 326174
AVX512 used to promote v32i1 to v32i8 during legalization when BWI was disabled. So this code was added to improve legalization of v32i1 concat_vectors of v16i1 by extending the v16i1 to v16i8 to avoid scalarization.
X86 has since switched to legalizing v32i1 by splitting to v16i1 instead. This has rendered this code unnecessary and its no longer exercised.
llvm-svn: 326153
Currently we assert that only non target specific opcodes can have
missing RegisterClass constraints in the MCDesc. The backend can have
instructions with register operands but don't have RegisterClass
constraints (say using unknown_class) in which case the instruction
defining the register will constrain it.
Change the assert to only fire if a def has no regclass.
https://reviews.llvm.org/D43409
llvm-svn: 326142
Agner's tables indicate that for SSE42+ targets (Core2 and later) we can reduce the FADD/FSUB/FMUL costs down to 1, which should fix the Himeno benchmark.
Note: the AVX512 FDIV costs look rather dodgy, but this isn't part of this patch.
Differential Revision: https://reviews.llvm.org/D43733
llvm-svn: 326133
There's still some shortcoming in our ability to combine binops of constants with different sizes separated by an extend. I'll try to look at that next.
llvm-svn: 326128
Summary:
We have an early DAG combine to turn these patterns into MOVMSK, but that combine doesn't work if the vXi1 type has more elements than the widest legal vXi8 type. Type legalization will eventually split it down to v16i1 or v32i1 and then the bitcast gets legalized to a truncstore and a scalar load. The truncstore will get lowered to a series of extracts and bit math.
This patch adds a custom legalization to use a sign extend and MOVMSK instead. This prevents the eventual scalarization.
Reviewers: spatel, RKSimon, zvi
Reviewed By: RKSimon
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D43593
llvm-svn: 326119
This change improves incremental rebuild performance on dual Xeon 8168
machines by 54%. This change also improves run time code gen by not
forcing the case values to be lvalues.
llvm-svn: 326109
This wires up -pass-remarks-hotness-threshold to LTO and ThinLTO.
Next is to change the clang driver to pass this
with -fdiagnostics-hotness-threshold.
Differential Revision: https://reviews.llvm.org/D41465
llvm-svn: 326107
Note: gcc appears to allow this fold with -freciprocal-math alone,
but clang/llvm require more than that with this patch. The wording
in the definitions seems fuzzy enough that it could go either way,
but we'll err on the conservative side of FMF interpretation.
This patch also changes the newly created fmul to have FMF propagated
by the last fdiv rather than intersecting the FMF of the fdivs. This
matches the behavior of other folds near here. The new fmul is only
used to produce an intermediate op for the final fdiv result, so it
shouldn't be any stricter than that result. The previous behavior
could result in dropping FMF via other folds in instcombine or CSE.
Differential Revision: https://reviews.llvm.org/D43398
llvm-svn: 326098
In r322867, we introduced IsStandalone when printing MIR in -debug
output. The default behaviour for that was:
1) If any of MBB, MI, or MO are -debug-printed separately, don't omit any
redundant information.
2) When -debug-printing a MF entirely, don't print any redundant
information.
3) When printing MIR, don't print any redundant information.
I'd like to change 2) to:
2) When -debug-printing a MF entirely, don't omit any redundant information.
Differential Revision: https://reviews.llvm.org/D43337
llvm-svn: 326094
This patch removes the HashString function from StringExtraces and
replaces its uses with calls to djbHash from DJB.h.
This change is *almost* NFC. While the algorithm is identical, the
djbHash implementation in StringExtras used 0 as its default seed while
the implementation in DJB uses 5381. The latter has been shown to result
in less collisions and improved avalanching and is used by the DWARF
accelerator tables.
Because some test were implicitly relying on the hash order, I've
reverted to using zero as a seed for the following two files:
lld/include/lld/Core/SymbolTable.h
llvm/lib/Support/StringMap.cpp
Differential revision: https://reviews.llvm.org/D43615
llvm-svn: 326091
Summary:
With OS type AMDPAL, the scratch descriptor is hardwired to be loaded
from offset 0 of the global information table, whose low pointer is
passed in s0. For a merge shader on gfx9+, it needs to be s8 instead, as
the hardware reserves s0-s7.
Reviewers: kzhuravl
Subscribers: arsenm, nhaehnle, dstuttard, llvm-commits, t-tye, yaxunl, wdng, kzhuravl
Differential Revision: https://reviews.llvm.org/D42203
llvm-svn: 326088
Summary:
In the test case, the machine scheduler moves a dead write to a subreg
up into the middle of a segment of the overall reg's live range, where
the segment had liveness only for other subregs in the reg.
handleMoveUp created an invalid live range, causing an assert a bit
later.
This commit fixes it to handle that situation. The segment is split in
two at the insertion point, and the part after the split, and any
subsequent segments up to the old position, are changed to be defined by
the moved def.
V2: Better test.
Subscribers: MatzeB, nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D43478
Change-Id: Ibc42445ddca84e79ad1f616401015d22bc63832e
llvm-svn: 326087
It looks like some of our tests depend on the ordering of hashed values.
I'm reverting my changes while I try to reproduce and fix this locally.
Failing builds:
lab.llvm.org:8011/builders/lld-x86_64-darwin13/builds/18388
lab.llvm.org:8011/builders/clang-cmake-x86_64-sde-avx512-linux/builds/6743
lab.llvm.org:8011/builders/llvm-clang-lld-x86_64-scei-ps4-windows10pro-fast/builds/15607
llvm-svn: 326082
This removes the HashString function from StringExtraces and replaces
its uses with calls to djbHash from DJB.h
This is *almost* NFC. While the algorithm is identical, the djbHash
implementation in StringExtras used 0 as its seed while the
implementation in DJB uses 5381. The latter has been shown to result in
less collisions and improved avalanching.
https://reviews.llvm.org/D43615
(cherry picked from commit 77f7f965bc9499a9ae768a296ca5a1f7347d1d2c)
llvm-svn: 326081
This will still be constexpr when the standard library supports it, but
doesn't force constexpr. Old libraries will get a global constructor,
which is not too bad.
llvm-svn: 326080
All SIMD architectures can emulate masked load/store/gather/scatter
through element-wise condition check, scalar load/store, and
insert/extract. Therefore, bailing out of vectorization as legality
failure, when they return false, is incorrect. We should proceed to cost
model and determine profitability.
This patch is to address the vectorizer's architectural limitation
described above. As such, I tried to keep the cost model and
vectorize/don't-vectorize behavior nearly unchanged. Cost model tuning
should be done separately.
Please see
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120164.html for
RFC and the discussions.
Closes D43208.
Patch by: Hideki Saito <hideki.saito@intel.com>
llvm-svn: 326079
The dependency matrix is only empty if no conflicting load/store
instructions have been found. In that case, it is safe to interchange.
For the LLVM test-suite, after this change around 1900 loops are
interchanged, whereas it is 15 before this change. On cortex-a57,
this gives an improvement of -0.57% on the geomean execution
time of SPEC2006, SPEC2000 and the test-suite. There are a
few small perf regressions, but I think we can improve on those
by making the cost model better.
Reviewers: karthikthecool, mcrosier
Reviewed by: karthikthecool
Differential Revision: https://reviews.llvm.org/D43236
llvm-svn: 326077
The patch introduces the new function in ScalarEvolution to get
all loops used in specified SCEV.
This is a preparation for re-writing isKnownPredicate utility as
described in https://reviews.llvm.org/D42417.
Reviewers: sanjoy, mkazantsev, reames
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43504
llvm-svn: 326072
The patch introduces the SCEVPostIncRewriter rewriter which
is similar to SCEVInitRewriter but rewrites AddRec with post increment
value of this AddRec.
This is a preparation for re-writing isKnownPredicate utility as
described in https://reviews.llvm.org/D42417.
Reviewers: sanjoy, mkazantsev, reames
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43499
llvm-svn: 326071
Enable multiple COPY hints to eliminate more COPYs during register allocation.
Note that this is something all targets should do, see
https://reviews.llvm.org/D38128.
Review: Robert Lytton
llvm-svn: 326069
The patch introduces an additional parameter IgnoreOtherLoops to SCEVInitRewriter.
if it is equal to true then rewriter will not invalidate result in case
SCEV depends on other loops then specified during creation.
The patch does not change the default behavior.
This is a preparation for re-writing isKnownPredicate utility as
described in https://reviews.llvm.org/D42417.
Reviewers: sanjoy, mkazantsev, reames
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43498
llvm-svn: 326067
This code seemed to try to widen to 128, 256, or 512 bit vectors, but we only create X86ISD::AVG with a power of 2 number of elements. This means the only nodes that need to be legalized are less than 128-bits and need to be widened up to 128 bits.
llvm-svn: 326064
Which types are considered 'simple' is a function of the requirements of all targets that LLVM supports. That shouldn't directly affect what types we are able to handle. The remainder of this code checks that the number of elements is a power of 2 and takes care of splitting down to a legal size.
llvm-svn: 326063
It is redundant with the implementation in TypedInit.
Change-Id: I8ab1fb5c77e4923f7eb3ffae5889f0f8af6093b4
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43678
llvm-svn: 326061
Summary:
FieldInit will just rely on the standardized resolving mechanism to give
us DefInits for folding, thus simplifying the code.
Unlike the removal of resolveListElementReference, this shouldn't have
performance implications, because DefInits do not recurse inside their
record.
Change-Id: Id4544c774c9d9ee92f293615af6ecff706453f21
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43563
llvm-svn: 326060
Summary:
Resolving a VarListElementInit should just resolve the list and then
take its element. This eliminates a lot of duplicated logic and
simplifies the next steps of refactoring resolveReferences.
This does potentially cause sub-elements of the entire list to be
resolved resulting in more work, but I didn't notice a measurable
change in performance, and a later patch adds a caching mechanism that
covers at least the common case of `var[i]` in a more generic way.
Change-Id: I7b59185b855c7368585c329c31e5be38c5749dac
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43562
llvm-svn: 326059
Our UMIN/UMAX, vector truncation and shuffle combining is good enough to efficiently handle v8i64 with the number of leading zeros that are necessary for PSUBUS.
llvm-svn: 326034
Now that UMIN etc are Legal/Custom for SSE2+, we can efficiently match SUBUS v8i32 cases from SSSE3 which can perform efficient truncation with PSHUFB.
llvm-svn: 326033
Enable multiple COPY hints to eliminate more COPYs during register allocation.
Note that this is something all targets should do, see
https://reviews.llvm.org/D38128.
Review: James Y Knight
llvm-svn: 326028
V_SUBBREV_U32 is a commute opcode for V_SUBB_U32. However, when
we try to commute V_SUBB_U32 in order to shrink it we do not then
process V_SUBBREV_U32 and it stay VOP3. This is fixed.
Differential Revision: https://reviews.llvm.org/D43699
llvm-svn: 326011
- an ambiguous reference to Optional<T> in llvm-dwarfdump.cpp (fixed
with an explicit prefix).
- a missing base class initialization in Entry copy constructor (fixed
by using the implicitly default constructor, which is possible after
some changes which were done during review).
llvm-svn: 326006
This diff fixes the name of the argument of
setSymTab and makes setSymTab/setStrTab private
(to make the public interface a bit cleaner).
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D43661
llvm-svn: 326005
Summary:
This patch implements the name lookup functionality of the .debug_names
accelerator table and hooks it up to "llvm-dwarfdump -find". To make the
interface of the two kinds of accelerator tables more consistent, I've
created an abstract "DWARFAcceleratorTable::Entry" class, which provides
a consistent interface to access the common functionality of the table
entries (such as getting the die offset, die tag, etc.). I've also
modified the apple table to vend entries conforming to this interface.
Reviewers: JDevlieghere, aprantl, probinson, dblaikie
Subscribers: vleschuk, clayborg, echristo, llvm-commits
Differential Revision: https://reviews.llvm.org/D43067
llvm-svn: 326003
This portion can be matched by other patterns. We don't need it to make the larger pattern valid. It's sufficient to have a v1i1 mask input without caring where it came from.
llvm-svn: 325999
This patch test disassembler output for load/store instructions when
-mattr=+alu32 specified for which we want to use "w" register format.
Also, this patch extended the existing insn-unit.s and insn-unit-32.s to
make sure disassemblers for all other instructions are not affected.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325993
This patch adds some unit tests for 32-bit subregister support.
We want to make sure ALU32, subregister load/store and new peephole
optimization are truely enabled once -mattr=+alu32 specified.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325992
This pass performs peephole optimizations to cleanup ugly code sequences at
MachineInstruction layer.
Currently, the only optimization in this pass is to eliminate type
promotion
sequences for zero extending 32-bit subregisters to 64-bit registers.
If the compiler could prove the zero extended source come from 32-bit
subregistere then it is safe to erase those promotion sequece, because the
upper half of the underlying 64-bit registers were zeroed implicitly
already.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325991
When -mattr=+alu32 passed to the disassembler, use decoder namespace for
32-bit subregister.
This is to disassemble load and store instructions in preferred B format
as described in previous commit:
w = *(u8 *) (r + off) // BPF_LDX | BPF_B
w = *(u16 *)(r + off) // BPF_LDX | BPF_H
w = *(u32 *)(r + off) // BPF_LDX | BPF_W
*(u8 *) (r + off) = w // BPF_STX | BPF_B
*(u16 *)(r + off) = w // BPF_STX | BPF_H
*(u32 *)(r + off) = w // BPF_STX | BPF_W
NOTE: all other instructions should still use the default decoder
namespace.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325990
After all those preparation patches, now we could enable 32-bit subregister
support once -mattr=+alu32 specified.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325989
This patch support 32-bit subregister in three InstrInfo hooks, i.e.
copyPhysReg, loadRegFromStackSlot and storeRegToStackSlot,
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325988
The instruction mapping between eBPF/arm64/x86_64 are:
eBPF arm64 x86_64
LD1 BPF_LDX | BPF_B ldrb movzbl
LD2 BPF_LDX | BPF_H ldrh movzwl
LD4 BPF_LDX | BPF_W ldr movl
movzbl/movzwl/movl on x86_64 accept 32-bit sub-register, for example %eax,
the same for ldrb/ldrh on arm64 which accept 32-bit "w" register. And
actually these instructions only accept sub-registers. There is no point
to have LD1/2/4 (unsigned) for 64-bit register, because on these arches,
upper 32-bits are guaranteed to be zeroed by hardware or VM, so load into
the smallest available register class is the best choice for maintaining
type information.
For eBPF we should adopt the same philosophy, to change current
format (A):
r = *(u8 *) (r + off) // BPF_LDX | BPF_B
r = *(u16 *)(r + off) // BPF_LDX | BPF_H
r = *(u32 *)(r + off) // BPF_LDX | BPF_W
*(u8 *) (r + off) = r // BPF_STX | BPF_B
*(u16 *)(r + off) = r // BPF_STX | BPF_H
*(u32 *)(r + off) = r // BPF_STX | BPF_W
into B:
w = *(u8 *) (r + off) // BPF_LDX | BPF_B
w = *(u16 *)(r + off) // BPF_LDX | BPF_H
w = *(u32 *)(r + off) // BPF_LDX | BPF_W
*(u8 *) (r + off) = w // BPF_STX | BPF_B
*(u16 *)(r + off) = w // BPF_STX | BPF_H
*(u32 *)(r + off) = w // BPF_STX | BPF_W
There is no change on encoding nor how should they be interpreted,
everything is as it is, load the specified length, write into low bits of
the register then zeroing all remaining high bits.
The only change is their associated register class and how compiler view
them.
Format A still need to be kept, because eBPF LLVM backend doesn't support
sub-registers at default, but once 32-bit subregister is enabled, it should
use format B.
This patch implemented this together with all those necessary extended load
and truncated store patterns.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325987
getScalarShiftAmount method should be implemented for eBPF backend to make
sure shift amount could still get correct type once 32-bit subregisters
support are enabled.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325986
We need to support condition comparison on i32. All these comparisons are
supposed to be combined into BPF_J* instructions which only support i64.
For ISD::BR_CC we need to promote it to i64 first, then do custom lowering.
For ISD::SET_CC, just expand to SELECT_CC like what's been done for i64.
For ISD::SELECT_CC, we also want to do custom lower for i32. However, after
32-bit subregister support enabled, it is possible the comparison operands
are i32 while the selected value are i64, or the comparison operands are
i64 while the selected value are i32. We need to define extra instruction
pattern and support them in custom instruction inserter.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325985
There is no eBPF ISA support for BSWAP, ROTR, ROTL, SREM, SDIVREM, MULHU,
ADDC, ADDE etc on i32.
They could be emulated by other basic BPF_ALU operations, we'd set their
lowering action the same as i64.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325984
This patch add new calling conventions to allow GPR32RegClass as valid
register class for arguments and return types.
New calling convention will only be choosen when -mattr=+alu32 specified.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325983
This new attribute aims to control the enablement of 32-bit subregister
support on eBPF backend.
Name the interface as "alu32" is because we in particular want to enable
the generation of BPF_ALU32 instructions by enable subregister support.
This attribute could be used in the following format with llc:
llc -mtriple=bpf -mattr=[+|-]alu32
It is disabled at default.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325982
For transformations between i32 and i64, if it is explicit signed extension:
- first cast the operand to i64
- then use SLL + SRA to finish the extension.
if it is explicit zero extension:
- first cast the operand to i64
- then use SLL + SRL to finish the extension.
if it is explicit any extension:
- just refer to 64-bit register.
if it is explicit truncation:
- just refer to 32-bit subregister.
NOTE: Some of the zero extension sequences might be unnecessary, they will be
removed by an peephole pass on MachineInstruction layer.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325981
These 32-bit ALU insn patterns which takes immediate as one operand were
initially added to enable AsmParser support, and the AsmMatcher uses "ins"
and "outs" fields to deduct the operand constraint.
However, the instruction selector doesn't work the same as AsmMatcher. The
selector will use the "pattern" field for which we are not setting the
predication for immediate operands correctly.
Without this patch, i32 would eventually means all i32 operands are valid,
both imm and gpr, while these patterns should allow imm only.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
llvm-svn: 325980
markSuperRegs is the canonical helper function used to mark reserved
registers. It could mark any overlapping sub-registers automatically.
Reviewed-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
llvm-svn: 325979
The instruction sequence used to get the address of the PC into a GPR requires
that we clobber the link register. Doing so without having first saved it in
the prologue leaves the function unable to return. Currently, this sequence is
emitted into the entry block. To ensure the prologue is inserted before this
sequence, disable shrink-wrapping.
This fixes PR33547.
Differential Revision: https://reviews.llvm.org/D43677
llvm-svn: 325972
In DWARF v5 the Line Number Program Header is extensible, allowing values with
new content types. In this extension a content type is added,
DW_LNCT_LLVM_source, which contains the embedded source code of the file.
Add new optional attribute for !DIFile IR metadata called source which contains
source text. Use this to output the source to the DWARF line table of code
objects. Analogously extend METADATA_FILE in Bitcode and .file directive in ASM
to support optional source.
Teach llvm-dwarfdump and llvm-objdump about the new values. Update the output
format of llvm-dwarfdump to make room for the new attribute on file_names
entries, and support embedded sources for the -source option in llvm-objdump.
Differential Revision: https://reviews.llvm.org/D42765
llvm-svn: 325970
This has the advantage of making release only builds more warning
free and there's no need to make this routine a class function if
it isn't using class members anyhow.
llvm-svn: 325967
This is the first in a series of patches that will define more
instructions using InstRW so that we can move away from ItinRW
and ultimately have a complete Power 9 scheduler.
Differential Revision: https://reviews.llvm.org/D43635
llvm-svn: 325956
These can be created by type legalization promoting the inputs to select to match scalar boolean contents.
We were trying to pattern match them away during isel, but its better to just remove them from the DAG.
I've cleaned up some patterns to not check for this 'and' anymore. But I suspect this has also opened up opportunities for pattern removal.
llvm-svn: 325949
https://github.com/golang/go/issues/23672
By this change, building a Go code with LLVM Go bindings causes a compilation error as follows.
go build llvm.org/llvm/bindings/go/llvm: invalid flag in #cgo LDFLAGS: -Wl,-headerpad_max_install_names
llvm-go tool generates cgo LDFLAGS directive from `llvm-config --ldflags` and it contains -Wl,option options. But -Wl,option is banned by default. To avoid this problem, we need to set $CGO_LDFLAGS_ALLOW environment variable to notify a compiler that the flags should be allowed.
$ export CGO_LDFLAGS_ALLOW='-Wl,(-search_paths_first|-headerpad_max_install_names)'
By default for go 1.10 and go 1.9.5 these options should appear in the accepted set of options, however, if you're running into the error it's useful to have this documented.
Patch by Ryuichi Hayashida
llvm-svn: 325946
This feature enables the fusion of the comparison and the conditional select
instructions together.
Differential revision: https://reviews.llvm.org/D42392
llvm-svn: 325939
The test changes you can see are related to the changes in ReplaceNodeResults. Though shuffle-vs-trunc-512.ll does have a test that exercises the code in LowerBITCAST. Looks like the test output didn't change because DAG combining is able to clean up the resulting type legalization. Adding the custom hook just makes type legalization work less hard.
Differential Revision: https://reviews.llvm.org/D43447
llvm-svn: 325933
Summary:
Add a target option AllowRegisterRenaming that is used to opt in to
post-register-allocation renaming of registers. This is set to 0 by
default, which causes the hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq
fields of all opcodes to be set to 1, causing
MachineOperand::isRenamable to always return false.
Set the AllowRegisterRenaming flag to 1 for all in-tree targets that
have lit tests that were effected by enabling COPY forwarding in
MachineCopyPropagation (AArch64, AMDGPU, ARM, Hexagon, Mips, PowerPC,
RISCV, Sparc, SystemZ and X86).
Add some more comments describing the semantics of the
MachineOperand::isRenamable function and how it is set and maintained.
Change isRenamable to check the operand's opcode
hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq bit directly instead of
relying on it being consistently reflected in the IsRenamable bit
setting.
Clear the IsRenamable bit when changing an operand's register value.
Remove target code that was clearing the IsRenamable bit when changing
registers/opcodes now that this is done conservatively by default.
Change setting of hasExtraSrcRegAllocReq in AMDGPU target to be done in
one place covering all opcodes that have constant pipe read limit
restrictions.
Reviewers: qcolombet, MatzeB
Subscribers: aemerson, arsenm, jyknight, mcrosier, sdardis, nhaehnle, javed.absar, tpr, arichardson, kristof.beyls, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, escha, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D43042
llvm-svn: 325931
Summary:
This patch is an enhancement to propagate dbg.value information when Phis are created on behalf of LCSSA.
I noticed a case where a value carried across a loop was reported as <optimized out>.
Specifically this case:
```
int bar(int x, int y) {
return x + y;
}
int foo(int size) {
int val = 0;
for (int i = 0; i < size; ++i) {
val = bar(val, i); // Both val and i are correct
}
return val; // <optimized out>
}
```
In the above case, after all of the interesting computation completes our value
is reported as "optimized out." This change will add a dbg.value to correct this.
This patch also moves the dbg.value insertion routine from LoopRotation.cpp
into Local.cpp, so that we can share it in both places (LoopRotation and LCSSA).
Reviewers: mzolotukhin, aprantl, vsk, davide
Reviewed By: aprantl, vsk
Subscribers: dberlin, llvm-commits
Differential Revision: https://reviews.llvm.org/D42551
llvm-svn: 325926
If we have a loop like this:
int n = 0;
while (...) {
if (++n >= MAX) {
n = 0;
}
}
then the body of the 'if' statement will only be executed once every MAX
iterations. Detect this by looking for branches in loops where taking the branch
makes the branch condition evaluate to 'not taken' in the next iteration of the
loop, and reduce the probability of such branches.
This slightly improves EEMBC benchmarks on cortex-m4/cortex-m33 due to making
better choices in if-conversion, but has no effect on any other cpu/benchmark
that I could detect.
Differential Revision: https://reviews.llvm.org/D35804
llvm-svn: 325925
The existing code was inefficiently looking for 'nsz' variants.
That's unnecessary because we canonicalize those to the expected
form with -0.0.
We may also want to adjust or remove the fold that sinks negation.
We don't do that for fdiv (or integer ops?). That should be uniform?
It may also lead to missed optimization as in PR21914:
https://bugs.llvm.org/show_bug.cgi?id=21914
...or we just have to fix other passes to avoid that problem.
llvm-svn: 325924
The following set of instructions was originally planned to be added for Power 9
and so code was added to support them. However, a decision was made later on to
withdraw support for these instructions in the hardware.
xscmpnedp
xvcmpnesp
xvcmpnedp
This patch removes support for the instructions that were not added.
Differential Revision: https://reviews.llvm.org/D43641
llvm-svn: 325918
Summary:
There are transformation that change setcc into other constructs, and transform that try to reconstruct a setcc from the brcond condition. Depending on what order these transform are done, the end result differs.
Most of the time, it is preferable to get a setcc as a brcond argument (and this is why brcond try to recreate the setcc in the first place) so we ensure this is done every time by also doing it at the setcc level when the only user is a brcond.
Reviewers: spatel, hfinkel, niravd, craig.topper
Subscribers: nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D41235
llvm-svn: 325892
This reverts r325884.
Clang's TableGen has dependencies on the exact ordering of superclasses.
Revert this change fully for now to fix the build.
Change-Id: Ib297f5571cc7809f00838702ad7ab53d47335b26
llvm-svn: 325891
Add GlobalISel infrastructure up to the point where we can select a ret
void.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D43583
llvm-svn: 325888
A subsequent change intends to remove resolveListElementReference
entirely. This part of the removal can be split out for better
bisectability.
Change-Id: Ibd762d88fd2d1e2cc116a259e2a27a5e9f9a8b10
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43561
Change-Id: Ifb695041cef1964ad8a3102f448249501a9243f0
llvm-svn: 325886
Summary:
Only check whether the left-hand side type is a subclass (or equal to)
the right-hand side type.
This requires a further fix in handling !if expressions and in type
resolution.
Furthermore, reverse the order of superclasses so that resolveTypes will
find a least common ancestor at least in simple cases.
Add a test that used to be accepted without flagging the obvious type
error.
Change-Id: Ib366db1a4e6a079f1a0851e469b402cddae76714
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43559
llvm-svn: 325884
Summary:
Returns the size of a list. I have found this to be rather useful in some
development for the AMDGPU backend where we could simplify our .td files
by concatenating list<LLVMType> for complex intrinsics. Doing so requires
us to compute the position argument for LLVMMatchType.
Basically, the usage is in a pattern that looks somewhat like this:
list<LLVMType> argtypes =
!listconcat(base,
[llvm_any_ty, LLVMMatchType<!size(base)>]);
Change-Id: I360a0b000fd488d18bea412228230fd93722bd2c
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits, tpr
Differential Revision: https://reviews.llvm.org/D43553
llvm-svn: 325883
Summary:
This handles def-after-use of physregs, and allows us to merge loads and
stores even across some physreg defs (typically M0 defs).
Change-Id: I076484b2bda27c2cf46013c845a0380c5b89b67b
Reviewers: arsenm, mareko, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D42647
llvm-svn: 325882
Summary:
This fixes cases like the new test @nonuniform. In that test, %cc itself
is a uniform value; however, when reading it after the end of the loop in
basic block %if, its value is effectively non-uniform.
This problem was encountered in
https://bugs.freedesktop.org/show_bug.cgi?id=103743; however, this change
in itself is not sufficient to fix that bug, as there is another issue
in the AMDGPU backend.
Change-Id: I32bbffece4a32f686fab54964dae1a5dd72949d4
Reviewers: arsenm, rampitec, jlebar
Subscribers: wdng, tpr, llvm-commits
Differential Revision: https://reviews.llvm.org/D40546
llvm-svn: 325881
Summary:
MemDep caches results that signify that a dependence is non-local, and
there is currently no way to invalidate such cache entries.
Unfortunately, when MLSM sinks a store that can result in a non-local
dependence becoming a local one, and then MemDep gives wrong answers.
The easiest way out here is to just say that MLSM does indeed not
preserve MemDep results.
Reviewers: davide, Gerolf
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43177
llvm-svn: 325880
Enable multiple COPY hints to eliminate more COPYs during register allocation.
Note that this is something all targets should do, see
https://reviews.llvm.org/D38128.
Review: Simon Dardis
llvm-svn: 325870
This is combination of two patches by Nicholas Wilson:
1. https://reviews.llvm.org/D41954
2. https://reviews.llvm.org/D42495
Along with a few local modifications:
- One change I made was to add the UNDEFINED bit to the binary format
to avoid the extra byte used when writing data symbols. Although this
bit is redundant for other symbols types (i.e. undefined can be
implied if a function or global is a wasm import)
- I prefer to be explicit and consistent and not have derived flags.
- Some field renaming.
- Some reverting of unrelated minor changes.
- No test output differences.
Differential Revision: https://reviews.llvm.org/D43147
llvm-svn: 325860
The base case for any_of was incorrectly returning true. Also add test
case which uses m_any_of(preds...) where none of the predicates are
true.
llvm-svn: 325848
We won't be able to fold the constant pool load, but its still better than materialing ones and xoring for the invert if we used PCMPEQ.
This will fix another regression from D42948.
llvm-svn: 325845
Move checks for each fusion case into separate functions for better
legibility and maintainability.
Differential revision: https://reviews.llvm.org/D43649
llvm-svn: 325844
Summary:
The built-in PDB types enum has been extended to include char16_t and char32_t.
llvm-pdbutil was hitting an llvm_unreachable because it didn't know about these
new values. The new values are not yet in the DIA documentation, but are
listed in the cvconst.h header that comes as part of the DIA SDK.
Reviewers: asmith, zturner, rnk
Subscribers: stella.stamenova, llvm-commits, sanjoy
Differential Revision: https://reviews.llvm.org/D43646
llvm-svn: 325838
The more popular opcodes were added at r325730, but we
should have everything here for symmetry. I think both
of these can be used in InstCombine already, but I'll
make those changes as separate clean-ups for InstCombine.
llvm-svn: 325832
Summary:
As pointed out in the review for D37993, for consistency with other
linkers, gold plugin should perform cache pruning whenever there is a
cache directory specified, which will use the default cache policy.
Reviewers: pcc
Subscribers: llvm-commits, inglorion
Differential Revision: https://reviews.llvm.org/D43389
llvm-svn: 325830
isCondCodeLegal internally checked Legal or Custom which is misleading. Though no targets set any cond code action to Custom today.
So I've renamed isCondCodeLegal to isCondCodeLegalOrCustom and added a real isCondCodeLegal that only checks Legal.
I've changed legalization code to use isCondCodeLegalOrCustom and left things reachable via DAG combine as isCondCodeLegal. I've also changed some places that called getCondCodeAction and compared to Legal to just use isCondCodeLegal.
I'm looking at trying to keep SETCC all the way to isel for the AVX512 integer comparisons and I suspect I'll need to make some condition codes Custom to stop DAG combine from changing things post LegalizeOps. Prior to this only Expand stopped DAG combine, but that causes LegalizeOps to try to swap operands or invert rather than calling our Custom handler.
Differential Revision: https://reviews.llvm.org/D43607
llvm-svn: 325829
Previously this code overrode the flags and opcode used by the later code in LowerVSETCC. This makes the code difficult to read and follow.
This patch moves all the SUBUS code into its own function and makes it responsible for creating its own SDNodes on success.
Differential Revision: https://reviews.llvm.org/D43530
llvm-svn: 325827
This patch reverts r325440 and r325438 because it triggers an
assertion in SelectionDAGBuilder.cpp. Also having debug enabled
may unintentionally affect code-gen. The patch is reverted until
we find a better solution.
llvm-svn: 325825
Summary:
The current integer representation of relative block frequency prevents
representing relative block frequencies below 1. This change uses a 8 of
the 29 bits to represent the decimal part by using a fixed scale of -8.
Reviewers: tejohnson, davidxl
Subscribers: mehdi_amini, inglorion, llvm-commits
Differential Revision: https://reviews.llvm.org/D43520
llvm-svn: 325823
When DataFlowSanitizer transforms a call to a custom function, the
new call has extra parameters. The attributes on parameters must be
updated to take the new position of each parameter into account.
Patch by Sam Kerner!
Differential Revision: https://reviews.llvm.org/D43132
llvm-svn: 325820
Summary:
ThinLTO indexing may decide to skip all objects. If we don't write something to
the list build system may consider this as failure or linker can reuse a file
from the previews build.
Reviewers: pcc, tejohnson
Subscribers: mehdi_amini, inglorion, eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D43415
llvm-svn: 325819
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
AlignmentFromAssumptions pass to cease using the old getAlignment()/setAlignment API of
MemoryIntrinsic in favour of getting/setting source & dest specific alignments through
the new API. This allows us to simplify some of the code in this pass and also be more
aggressive about setting the source and destination alignments separately.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, rL323891, rL324148, rL324273, rL324278,
rL324384, rL324395, rL324402, rL324626, rL324642, rL324653, rL324654, rL324773, rL324774,
rL324781, rL324784, rL324955, rL324960 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
Reviewers: hfinkel, bollu, reames
Reviewed By: reames
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D43081
llvm-svn: 325816
This allows us to improve vector constant matching in more DAG code (backends, TargetLowering etc.).
Differential Revision: https://reviews.llvm.org/D43466
llvm-svn: 325815
Extension to D12776, handle modulo by zero in the same way we handle divide by zero.
Differential Revision: https://reviews.llvm.org/D43631
llvm-svn: 325810
Also, add a helper for the constant folder to reduce duplication.
It seems out-of-place for and/or to be doing simplifications here?
Otherwise, I could have used the helper on those opcodes too.
llvm-svn: 325808
Summary:
If there is no debug info for macros, do not emit labels for empty
macinfo sections.
Reviewers: probinson, echristo
Subscribers: aprantl, llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D43589
llvm-svn: 325803
Summary:
Both of these errors should have been caught by type-checking during
parsing.
Change-Id: I891087936fd1a91d21bcda57c256e3edbe12b94d
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43558
llvm-svn: 325800
Summary:
Perhaps the distinction between the two should be removed entirely
in the long term, and the [{ ... }] syntax should just be a convenient
way of writing multi-line strings.
In the meantime, a lot of existing .td files are quite relaxed about
string vs. code, and this change allows switching on more consistent
type checks without breaking those.
Change-Id: If85e3e04469e41b58e2703b62ac0032d2711713c
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43557
llvm-svn: 325799
Summary:
There are no new test cases, but a subsequent patch will introduce
assertions that would be triggered by existing test cases without this
fix.
Change-Id: I6a82d4b311b012aff3932978ae86f6a2dcfbf725
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43556
llvm-svn: 325798
Summary:
In the case of !foreach(id, input-list, transform) where the type of
input-list is list<A> and the type of transform is B, we now correctly
deduce list<B> as the type of the !foreach.
Change-Id: Ia19dd65eecc5991dd648280ba6a15f6a20fd61de
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43555
llvm-svn: 325797
Summary:
This way, it should work even with complex operands.
Change-Id: Iaccf5bbb50bd5882a0ba5d59689e4381315fb361
Reviewers: arsenm, craig.topper, tra, MartinO
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D43554
llvm-svn: 325796
Summary:
.NAME is a bit of an odd duck, in that we should really treat it like
a template argument, but we currently don't, and so when and where
NAME is initialized and how is pretty inconsistent. Best to just avoid
using it as a field of already instantiated records, and use cast to
string instead.
Change-Id: I5a0c202401cede3d5c3827ab9c7858ea48b29108
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D43551
llvm-svn: 325794
Implement c.lui immediate constraint to [1, 31] and [0xfffe0, 0xfffff].
The RISC-V ISA describes the constraint as [1, 63], with that value
being loaded in to bits 17-12 of the destination register and sign extended
from bit 17. Therefore, this 6-bit immediate can represent values in the
ranges [1, 31] and [0xfffe0, 0xfffff].
Differential Revision: https://reviews.llvm.org/D42834
llvm-svn: 325792
- Fix for bug 36078.
- Prevent the functionattrs, function-attrs, globalopt and argpromotion passes
from changing naked functions.
- These passes can perform some alterations to the functions that should not be
applied. An example is removing parameters that are seemingly not used because
they are only referenced in the inline assembly. Another example is marking
the function as fastcc.
llvm-svn: 325788
There were no memory dependencies made between stores generated
when lowering formal arguments and loads generated when
call lowering byVal arguments which made the Post-RA scheduler
place a load before a matching store.
Make the fixed object stored to mutable so that the load
instructions can have their memory dependencies added
Set the frame object as isAliased which clears the underlying
objects vector in ScheduleDAGInstrs::buildSchedGraph().
This results in addition of all stores as dependenies for loads.
This problem appeared when passing a byVal parameter
coupled with a fastcc function call.
Differential Revision: https://reviews.llvm.org/D37515
llvm-svn: 325782
NFC intended, syndicate common code to a parametric base class. Part of the original problem is that InvokeInst is a TerminatorInst, unlike CallInst. the problem is solved by introducing a parametrized class paramtertized by its base.
Differential Revision: https://reviews.llvm.org/D40727
llvm-svn: 325778
Roman Tereshin