This also removes the need to disable the mandatory inlining phase in
tests.
In a departure from the previous remark, we don't output a 'cost' in
this case, because there's no such thing. We just report that inlining
happened because of the attribute.
Differential Revision: https://reviews.llvm.org/D110891
A followup to D110201.
For example, we'd set OptimizationRemarkMissed's Regex to '.*' when
encountering -Rpass. Normally this doesn't actually affect remarks we
emit because in clang::ProcessWarningOptions() we'll separately look at
all -R arguments and turn on/off corresponding diagnostic groups.
However, this is reproducible with -round-trip-args.
Reviewed By: JamesNagurne
Differential Revision: https://reviews.llvm.org/D110673
Some people downstream are reporting that this test fails. I've been
unable to reproduce, but there is indeed something spooky going on.
Pinning to the new PM suppresses the failure. I'm continuing to
investigate this.
Previously with -Rpass (and friends) we'd have remarks "enabled", but
without an actual regex.
As seen in the test change to line numbers, this can give us better
diagnostics by properly enabling NeedLocTracking with -Rpass.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D110201
Clang diagnostics refer to identifier names in quotes.
This patch makes inline remarks conform to the convention.
New behavior:
```
% clang -O2 -Rpass=inline -Rpass-missed=inline -S a.c
a.c:4:25: remark: 'foo' inlined into 'bar' with (cost=-30, threshold=337) at callsite bar:0:25; [-Rpass=inline]
int bar(int a) { return foo(a); }
^
```
Reviewed By: hoy
Differential Revision: https://reviews.llvm.org/D107791
Expanding from D94808 - we ensure the same InlineAdvisor is used by both
InlinerPass instances. The notion of mandatory inlining is moved into
the core InlineAdvisor: advisors anyway have to handle that case, so
this change also factors out that a bit better.
Differential Revision: https://reviews.llvm.org/D94825
Enable performing mandatory inlinings upfront, by reusing the same logic
as the full inliner, instead of the AlwaysInliner. This has the
following benefits:
- reduce code duplication - one inliner codebase
- open the opportunity to help the full inliner by performing additional
function passes after the mandatory inlinings, but before th full
inliner. Performing the mandatory inlinings first simplifies the problem
the full inliner needs to solve: less call sites, more contextualization, and,
depending on the additional function optimization passes run between the
2 inliners, higher accuracy of cost models / decision policies.
Note that this patch does not yet enable much in terms of post-always
inline function optimization.
Differential Revision: https://reviews.llvm.org/D91567
- CodeGen/flatten.c will fail under new PM becausec the new PM AlwaysInliner
seems to intentionally inline functions but not call sites marked with
alwaysinline (D23299)
- Tests that check remarks happen to check them for the inliner which is not
turned on at O0. These tests just check that remarks work, but we can make
separate tests for the new PM with -O1 so we can turn on the inliner and
check the remarks with minimal changes.
Differential Revision: https://reviews.llvm.org/D62225
llvm-svn: 363846
It is intended to disable _all_ warnings, even those upgraded to
errors via `-Werror=warningname` or `#pragma clang diagnostic error'
Fixes: https://llvm.org/PR38231
Differential Revision: https://reviews.llvm.org/D53199
llvm-svn: 352535
profiling and optimization remarks and indicate that no debug info shall
be emitted for these compile units.
http://reviews.llvm.org/D18808
<rdar://problem/25427165>
llvm-svn: 265862
With this change, most 'g' options are rejected by CompilerInvocation.
They remain only as Driver options. The new way to request debug info
from cc1 is with "-debug-info-kind={line-tables-only|limited|standalone}"
and "-dwarf-version={2|3|4}". In the absence of a command-line option
to specify Dwarf version, the Toolchain decides it, rather than placing
Toolchain-specific logic in CompilerInvocation.
Also fix a bug in the Windows compatibility argument parsing
in which the "rightmost argument wins" principle failed.
Differential Revision: http://reviews.llvm.org/D13221
llvm-svn: 249655
Current implementation may end up emitting an undefined reference for
an "inline __attribute__((always_inline))" function by generating an
"available_externally alwaysinline" IR function for it and then failing to
inline all the calls. This happens when a call to such function is in dead
code. As the inliner is an SCC pass, it does not process dead code.
Libc++ relies on the compiler never emitting such undefined reference.
With this patch, we emit a pair of
1. internal alwaysinline definition (called F.alwaysinline)
2a. A stub F() { musttail call F.alwaysinline }
-- or, depending on the linkage --
2b. A declaration of F.
The frontend ensures that F.inlinefunction is only used for direct
calls, and the stub is used for everything else (taking the address of
the function, really). Declaration (2b) is emitted in the case when
"inline" is meant for inlining only (like __gnu_inline__ and some
other cases).
This approach, among other nice properties, ensures that alwaysinline
functions are always internal, making it impossible for a direct call
to such function to produce an undefined symbol reference.
This patch is based on ideas by Chandler Carruth and Richard Smith.
llvm-svn: 247494
Current implementation may end up emitting an undefined reference for
an "inline __attribute__((always_inline))" function by generating an
"available_externally alwaysinline" IR function for it and then failing to
inline all the calls. This happens when a call to such function is in dead
code. As the inliner is an SCC pass, it does not process dead code.
Libc++ relies on the compiler never emitting such undefined reference.
With this patch, we emit a pair of
1. internal alwaysinline definition (called F.alwaysinline)
2a. A stub F() { musttail call F.alwaysinline }
-- or, depending on the linkage --
2b. A declaration of F.
The frontend ensures that F.inlinefunction is only used for direct
calls, and the stub is used for everything else (taking the address of
the function, really). Declaration (2b) is emitted in the case when
"inline" is meant for inlining only (like __gnu_inline__ and some
other cases).
This approach, among other nice properties, ensures that alwaysinline
functions are always internal, making it impossible for a direct call
to such function to produce an undefined symbol reference.
This patch is based on ideas by Chandler Carruth and Richard Smith.
llvm-svn: 247465
intent when we added remark support, but was never implemented in the general
case, because the first -R flags didn't need it. (-Rpass= had special handling
to accomodate its argument.)
-Rno-foo, -Reverything, and -Rno-everything can be used to turn off a remark,
or to turn on or off all remarks. Per discussion on cfe-commits, -Weverything
does not affect remarks, and -Reverything does not affect warnings or errors.
The only "real" -R flag we have right now is -Rmodule-build; that flag is
effectively renamed from -Wmodule-build to -Rmodule-build by this change.
-Wpass and -Wno-pass (and their friends) are also renamed to -Rpass and
-Rno-pass by this change; it's not completely clear whether we intended to have
a -Rpass (with no =pattern), but that is unchanged by this commit, other than
the flag name. The default pattern is effectively one which matches no passes.
In future, we may want to make the default pattern be .*, so that -Reverything
works for -Rpass properly.
llvm-svn: 215046
With LocTrackingOnly there's no longer a user-facing distinction so the NDEBUG
checks can go away. (Except maybe column info, but -verify only checks line
numbers anyway.)
Also add a RUN line to validate the traditional !LocTrackingOnly case.
llvm-svn: 211622
Summary:
This new debug emission kind supports emitting line location
information in all instructions, but stops code generation
from emitting debug info to the final output.
This mode is useful when the backend wants to track source
locations during code generation, but it does not want to
produce debug info. This is currently used by optimization
remarks (-Rpass, -Rpass-missed and -Rpass-analysis).
When one of the -Rpass flags is used, the front end will enable
location tracking, only if no other debug option is enabled.
To prevent debug information from being generated, a new debug
info kind LocTrackingOnly causes DIBuilder::createCompileUnit() to
not emit the llvm.dbg.cu annotation. This blocks final code generation
from generating debug info in the back end.
Depends on D4234.
Reviewers: echristo, dblaikie
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D4235
llvm-svn: 211610
A leftover -S was generating unwanted output in the source tree overriding
-only flags that normally disable output.
This reverts commit r210323 and implements the proper fix.
Reported by Timur Iskhodzhanov!
llvm-svn: 210326
Instead of disembodied diagnostics when debug info is disabled it's now
possible to identify the associated function's location in order to provide
some amount of of context.
We use the definition's body right brace location to differentiate the fallback
from diagnostics that genuinely relate to the function declaration itself (a
convention also used by gcc).
llvm-svn: 210294
Summary:
These two flags are in the same family as -Rpass, but are used in
different situations.
-Rpass-missed is used by optimizers to inform the user when they tried
to apply an optimization but couldn't (or wouldn't).
-Rpass-analysis is used by optimizers to report analysis results back
to the user (e.g., why the transformation could not be applied).
Depends on D3682.
Reviewers: rsmith
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D3683
llvm-svn: 209839
Summary:
This allows callers of Diags.Report() to append a value to the name of
the flag associated with the diagnostic. This is useful in cases like
the -Rpass flag, where we want the diagnostic to show the name of the
pass that matched the pattern. Instead of showing "... [-Rpass]", this
allows us to show "... [-Rpass=passname]".
Reviewers: rsmith
CC: cfe-commits
Differential Revision: http://reviews.llvm.org/D3441
llvm-svn: 206826
Summary:
This patch adds a new flag -Rpass=. The flag indicates the name
of the optimization pass that should emit remarks stating when it
made a transformation to the code.
This implements the design I proposed in:
https://docs.google.com/document/d/1FYUatSjZZO-zmFBxjOiuOzAy9mhHA8hqdvklZv68WuQ/edit?usp=sharing
Other changes:
- Add DiagnosticIDs::isRemark(). Use it in printDiagnosticOptions to
print "-R" instead of "-W" in the diagnostic message.
- In BackendConsumer::OptimizationRemarkHandler, get a SourceLocation
object out of the file name, line and column number. Use that location
in the call to Diags.Report().
- When -Rpass is used without debug info a note is emitted alerting
the user that they need to use -gline-tables-only -gcolumn-info to
get this information.
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D3226
llvm-svn: 206401
Arthur Eubanks