For ISD::EXTRACT_SUBVECTOR, its second operand must be a constant
multiple of the known-minimum vector length of the result type.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D107795
One of the cases identified in PR45116 - we don't need to limit load combines to ABI alignment, we can use allowsMemoryAccess - which tests using getABITypeAlign, but also checks if a target permits (fast) misaligned memory loads by checking allowsMisalignedMemoryAccesses as a fallback.
One of the cases identified in PR45116 - we don't need to limit load combines (in this case for fp->int load/store copies) to ABI alignment, we can use allowsMemoryAccess - which tests using getABITypeAlign, but also checks if a target permits (fast) misaligned memory loads by checking allowsMisalignedMemoryAccesses as a fallback.
Differential Revision: https://reviews.llvm.org/D108318
One of the cases identified in PR45116 - we don't need to limit load combines (in this case for ISD::BUILD_PAIR) to ABI alignment, we can use allowsMemoryAccess - which tests using getABITypeAlign, but also checks if a target permits (fast) misaligned memory loads by checking allowsMisalignedMemoryAccesses as a fallback.
This helps in particular for 32-bit X86 cases loading 64-bit size data, reducing codegen diffs vs x86_64.
Differential Revision: https://reviews.llvm.org/D108307
This changes the lowering of saddsat and ssubsat so that instead of
using:
r,o = saddo x, y
c = setcc r < 0
s = c ? INTMAX : INTMIN
ret o ? s : r
into using asr and xor to materialize the INTMAX/INTMIN constants:
r,o = saddo x, y
s = ashr r, BW-1
x = xor s, INTMIN
ret o ? x : r
https://alive2.llvm.org/ce/z/TYufgD
This seems to reduce the instruction count in most testcases across most
architectures. X86 has some custom lowering added to compensate for
cases where it can increase instruction count.
Differential Revision: https://reviews.llvm.org/D105853
Previously we pre-calculated this and cached it for every
instruction in the function. Most of the calculated results will
never be used. So instead calculate it only on the first use, and
then cache it.
The cache was originally added to fix a compile time issue which
caused r216066 to be reverted.
This change exposed that we weren't pre-computing the Value for
Arguments. I've explicitly disabled that for now as it seemed to
regress some tests on AArch64 which has sext built into its compare
instructions.
Spotted while investigating how to improve heuristics to work better
with RISCV preferring sign extend for unsigned compares for i32 on RV64.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D107976
This patch adds the beginnings of more thorough support in the
legalizers for vector-predicated (VP) operations.
The first step is the ability to widen illegal vectors. The more
complicated scenario in which the result/operands need widening but the
mask doesn't has not been handled here. That would require a lot of code
without an in-tree target on which to test it.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D107904
This patch adds vector-predicated ("VP") reduction intrinsics corresponding to
each of the existing unpredicated `llvm.vector.reduce.*` versions. Unlike the
unpredicated reductions, all VP reductions have a start value. This start value
is returned when the no vector element is active.
Support for expansion on targets without native vector-predication support is
included.
This patch is based on the ["reduction
slice"](https://reviews.llvm.org/D57504#1732277) of the LLVM-VP reference patch
(https://reviews.llvm.org/D57504).
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D104308
Follow-up to D107068, attempt to fold nested concat_vectors/undefs, as long as both the vector and inner subvector types are legal.
This exposed the same issue in ARM's MVE LowerCONCAT_VECTORS_i1 (raised as PR51365) and AArch64's performConcatVectorsCombine which both assumed concat_vectors only took 2 subvector operands.
Differential Revision: https://reviews.llvm.org/D107597
visitEXTRACT_SUBVECTOR can sometimes create illegal BITCASTs when
removing "redundant" INSERT_SUBVECTOR operations. This patch adds
an extra check to ensure such combines only occur after operation
legalisation if any resulting BITBAST is itself legal.
Differential Revision: https://reviews.llvm.org/D108086
AttributeList::hasAttribute() is confusing, use clearer methods like
hasParamAttr()/hasRetAttr().
Add hasRetAttr() since it was missing from AttributeList.
We were calling find and then using operator[]. Instead keep the
iterator from find and use it to get the value.
Just happened to notice while investigating how we decide what extends
to use between basic blocks.
This patch refactors / simplifies salvageDebugInfoImpl(). The goal
here is to simplify the implementation of coro::salvageDebugInfo() in
a followup patch.
1. Change the return value to I.getOperand(0). Currently users of
salvageDebugInfoImpl() assume that the first operand is
I.getOperand(0). This patch makes this information explicit. A
nice side-effect of this change is that it allows us to salvage
expressions such as add i8 1, %a in the future.
2. Factor out the creation of a DIExpression and return an array of
DIExpression operations instead. This change allows users that
call salvageDebugInfoImpl() in a loop to avoid the costly
creation of temporary DIExpressions and to defer the creation of
a DIExpression until the end.
This patch does not change any functionality.
rdar://80227769
Differential Revision: https://reviews.llvm.org/D107383
This commit adds the isnan intrinsic and provides a default expansion
for it in the SDAG. However, it makes the assumption that types
it operates on are IEEE-compliant types. This is not always the case.
An example of that is PPC "double double" which has a representation
that
- Does not need to conform to IEEE requirements for isnan as it is
not an IEEE-compliant type
- Does not have a representation that allows for straightforward
reinterpreting as an integer and use of integer operations
The result was that this commit broke __builtin_isnan for ppc_fp128
making many valid numeric values report a NaN.
This patch simply changes the expansion to always expand to unordered
comparison (regardless of whether FP exceptions are tracked). This
is inline with previous semantics.
This isn't optimal, but prevents crashing when the libcall isn't
available. It just calculates the full product and makes sure the high bits
match the sign of the low half. Each of the pieces should go through their own
type legalization.
This can make D107420 unnecessary.
Needs tests, but I wanted to start discussion about D107420.
Reviewed By: FreddyYe
Differential Revision: https://reviews.llvm.org/D107581
This is recommit of the patch 16ff91ebcc,
reverted in 0c28a7c990 because it had
an error in call of getFastMathFlags (base type should be FPMathOperator
but not Instruction). The original commit message is duplicated below:
Clang has builtin function '__builtin_isnan', which implements C
library function 'isnan'. This function now is implemented entirely in
clang codegen, which expands the function into set of IR operations.
There are three mechanisms by which the expansion can be made.
* The most common mechanism is using an unordered comparison made by
instruction 'fcmp uno'. This simple solution is target-independent
and works well in most cases. It however is not suitable if floating
point exceptions are tracked. Corresponding IEEE 754 operation and C
function must never raise FP exception, even if the argument is a
signaling NaN. Compare instructions usually does not have such
property, they raise 'invalid' exception in such case. So this
mechanism is unsuitable when exception behavior is strict. In
particular it could result in unexpected trapping if argument is SNaN.
* Another solution was implemented in https://reviews.llvm.org/D95948.
It is used in the cases when raising FP exceptions by 'isnan' is not
allowed. This solution implements 'isnan' using integer operations.
It solves the problem of exceptions, but offers one solution for all
targets, however some can do the check in more efficient way.
* Solution implemented by https://reviews.llvm.org/D96568 introduced a
hook 'clang::TargetCodeGenInfo::testFPKind', which injects target
specific code into IR. Now only SystemZ implements this hook and it
generates a call to target specific intrinsic function.
Although these mechanisms allow to implement 'isnan' with enough
efficiency, expanding 'isnan' in clang has drawbacks:
* The operation 'isnan' is hidden behind generic integer operations or
target-specific intrinsics. It complicates analysis and can prevent
some optimizations.
* IR can be created by tools other than clang, in this case treatment
of 'isnan' has to be duplicated in that tool.
Another issue with the current implementation of 'isnan' comes from the
use of options '-ffast-math' or '-fno-honor-nans'. If such option is
specified, 'fcmp uno' may be optimized to 'false'. It is valid
optimization in general, but it results in 'isnan' always returning
'false'. For example, in some libc++ implementations the following code
returns 'false':
std::isnan(std::numeric_limits<float>::quiet_NaN())
The options '-ffast-math' and '-fno-honor-nans' imply that FP operation
operands are never NaNs. This assumption however should not be applied
to the functions that check FP number properties, including 'isnan'. If
such function returns expected result instead of actually making
checks, it becomes useless in many cases. The option '-ffast-math' is
often used for performance critical code, as it can speed up execution
by the expense of manual treatment of corner cases. If 'isnan' returns
assumed result, a user cannot use it in the manual treatment of NaNs
and has to invent replacements, like making the check using integer
operations. There is a discussion in https://reviews.llvm.org/D18513#387418,
which also expresses the opinion, that limitations imposed by
'-ffast-math' should be applied only to 'math' functions but not to
'tests'.
To overcome these drawbacks, this change introduces a new IR intrinsic
function 'llvm.isnan', which realizes the check as specified by IEEE-754
and C standards in target-agnostic way. During IR transformations it
does not undergo undesirable optimizations. It reaches instruction
selection, where is lowered in target-dependent way. The lowering can
vary depending on options like '-ffast-math' or '-ffp-model' so the
resulting code satisfies requested semantics.
Differential Revision: https://reviews.llvm.org/D104854
We don't have real demanded bits support for MULHU, but we can
still use the known bits based constant folding support at the end
of SimplifyDemandedBits to simplify a MULHU. This helps with cases
where we know the LHS and RHS have enough leading zeros so that
the high multiply result is always 0.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D106471
IR typically creates INSERT_SUBVECTOR patterns as a widening of the subvector with undefs to pad to the destination size, followed by a shuffle for the actual insertion - SelectionDAGBuilder has to do something similar for shuffles when source/destination vectors are different sizes.
This combine attempts to recognize these patterns by looking for a shuffle of a subvector (from a CONCAT_VECTORS) that starts at a modulo of its size into an otherwise identity shuffle of the base vector.
This uncovered a couple of target-specific issues as we haven't often created INSERT_SUBVECTOR nodes in generic code - aarch64 could only handle insertions into the bottom of undefs (i.e. a vector widening), and x86-avx512 vXi1 insertion wasn't keeping track of undef elements in the base vector.
Fixes PR50053
Differential Revision: https://reviews.llvm.org/D107068
It's entirely possible (because it actually happened) for a bool
variable to end up with a 256-bit DW_AT_const_value. This came about
when a local bool variable was initialized from a bitfield in a
32-byte struct of bitfields, and after inlining and constant
propagation, the variable did have a constant value. The sequence of
optimizations had it carrying "i256" values around, but once the
constant made it into the llvm.dbg.value, no further IR changes could
affect it.
Technically the llvm.dbg.value did have a DIExpression to reduce it
back down to 8 bits, but the compiler is in no way ready to emit an
oversized constant *and* a DWARF expression to manipulate it.
Depending on the circumstances, we had either just the very fat bool
value, or an expression with no starting value.
The sequence of optimizations that led to this state did seem pretty
reasonable, so the solution I came up with was to invent a DWARF
constant expression folder. Currently it only does convert ops, but
there's no reason it couldn't do other ops if that became useful.
This broke three tests that depended on having convert ops survive
into the DWARF, so I added an operator that would abort the folder to
each of those tests.
Differential Revision: https://reviews.llvm.org/D106915
The LegalizeAction for this node should follow the logic for
`VECREDUCE_SEQ_FADD` and be determined using the vector operand's type.
here isn't an in-tree target that makes use of this, but I think it's safe to
say this is how it should behave, should a target want to customize the action
for this node.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D107478
This allows special constants like to 0 to be recognized. It's also
expected by isel patterns if a target had a mulh with immediate instructions.
The commuting done by tablegen won't commute patterns with immediates since it
expects DAGCombine to have done it.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D107486
Clang has builtin function '__builtin_isnan', which implements C
library function 'isnan'. This function now is implemented entirely in
clang codegen, which expands the function into set of IR operations.
There are three mechanisms by which the expansion can be made.
* The most common mechanism is using an unordered comparison made by
instruction 'fcmp uno'. This simple solution is target-independent
and works well in most cases. It however is not suitable if floating
point exceptions are tracked. Corresponding IEEE 754 operation and C
function must never raise FP exception, even if the argument is a
signaling NaN. Compare instructions usually does not have such
property, they raise 'invalid' exception in such case. So this
mechanism is unsuitable when exception behavior is strict. In
particular it could result in unexpected trapping if argument is SNaN.
* Another solution was implemented in https://reviews.llvm.org/D95948.
It is used in the cases when raising FP exceptions by 'isnan' is not
allowed. This solution implements 'isnan' using integer operations.
It solves the problem of exceptions, but offers one solution for all
targets, however some can do the check in more efficient way.
* Solution implemented by https://reviews.llvm.org/D96568 introduced a
hook 'clang::TargetCodeGenInfo::testFPKind', which injects target
specific code into IR. Now only SystemZ implements this hook and it
generates a call to target specific intrinsic function.
Although these mechanisms allow to implement 'isnan' with enough
efficiency, expanding 'isnan' in clang has drawbacks:
* The operation 'isnan' is hidden behind generic integer operations or
target-specific intrinsics. It complicates analysis and can prevent
some optimizations.
* IR can be created by tools other than clang, in this case treatment
of 'isnan' has to be duplicated in that tool.
Another issue with the current implementation of 'isnan' comes from the
use of options '-ffast-math' or '-fno-honor-nans'. If such option is
specified, 'fcmp uno' may be optimized to 'false'. It is valid
optimization in general, but it results in 'isnan' always returning
'false'. For example, in some libc++ implementations the following code
returns 'false':
std::isnan(std::numeric_limits<float>::quiet_NaN())
The options '-ffast-math' and '-fno-honor-nans' imply that FP operation
operands are never NaNs. This assumption however should not be applied
to the functions that check FP number properties, including 'isnan'. If
such function returns expected result instead of actually making
checks, it becomes useless in many cases. The option '-ffast-math' is
often used for performance critical code, as it can speed up execution
by the expense of manual treatment of corner cases. If 'isnan' returns
assumed result, a user cannot use it in the manual treatment of NaNs
and has to invent replacements, like making the check using integer
operations. There is a discussion in https://reviews.llvm.org/D18513#387418,
which also expresses the opinion, that limitations imposed by
'-ffast-math' should be applied only to 'math' functions but not to
'tests'.
To overcome these drawbacks, this change introduces a new IR intrinsic
function 'llvm.isnan', which realizes the check as specified by IEEE-754
and C standards in target-agnostic way. During IR transformations it
does not undergo undesirable optimizations. It reaches instruction
selection, where is lowered in target-dependent way. The lowering can
vary depending on options like '-ffast-math' or '-ffp-model' so the
resulting code satisfies requested semantics.
Differential Revision: https://reviews.llvm.org/D104854
We had some similar hasOneUse/isNON_EXTLoad early-outs spread out over different parts of the method - we should pull them all together.
Noticed while triaging PR45116
This adds handling for two cases:
1. A scalable vector where the element type is promoted.
2. A scalable vector where the element count is odd (or more generally,
not divisble by the element count of the part type).
(Some element types still don't work; for example, <vscale x 2 x i128>,
or <vscale x 2 x fp128>.)
Differential Revision: https://reviews.llvm.org/D105591
If all demanded elements of the BUILD_VECTOR pass a isGuaranteedNotToBeUndefOrPoison check, then we can treat this specific demanded use of the BUILD_VECTOR as guaranteed not to be undef or poison either.
Differential Revision: https://reviews.llvm.org/D107174
This patch legalizes the Machine Value Type introduced in D94096 for loads
and stores. A new target hook named getAsmOperandValueType() is added which
maps i512 to MVT::i64x8. GlobalISel falls back to DAG for legalization.
Differential Revision: https://reviews.llvm.org/D94097
This transform was added with D58874, but there were no tests for overflow ops.
We need to change this one way or another because it can crash as shown in:
https://llvm.org/PR51238
Note that if there are no uses of an overflow op's bool overflow result, we
reduce it to a regular math op, so we continue to fold that case either way.
If we have uses of both the math and the overflow bool, then we are likely
not saving anything by creating an independent sub instruction as seen in
the test diffs here.
This patch makes the behavior in SDAG consistent with what we do in
instcombine AFAICT.
Differential Revision: https://reviews.llvm.org/D106983
When we have a terminator sequence (i.e. a tailcall or return),
MIIsInTerminatorSequence is used to work out where the preceding ABI-setup
instructions end, i.e. the parts that were glued to the terminator
instruction. This allows LLVM to split blocks safely without having to
worry about ABI stuff.
The function only ignores DBG_VALUE instructions, meaning that the two
debug instructions I recently added can end terminator sequences early,
causing various MachineVerifier errors. This patch promotes the test for
debug instructions from "isDebugValue" to "isDebugInstr", thus avoiding any
debug-info interfering with this function.
Differential Revision: https://reviews.llvm.org/D106660
This patch adds a peephole optimization `SETCC(FREEZE(x),const)` => `FREEZE(SETCC(x,const))`
if the SETCC is only used by BRCOND.
Combined with `BRCOND(FREEZE(X)) => BRCOND(X)`, this leads to a nice improvement in the generated assembly when x is a masked loaded value.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D105344
This patch builds on top of D106575 in which scalable-vector splats were
supported in `ISD::matchBinaryPredicate`. It teaches the DAGCombiner how
to perform a variety of the pre-existing saturating add/sub combines on
scalable-vector types.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D106652
This patch extends support for (scalable-vector) splats in the
DAGCombiner via the `ISD::matchBinaryPredicate` function, which enable a
variety of simple combines of constants.
Users of this function may now have to distinguish between
`BUILD_VECTOR` and `SPLAT_VECTOR` vector operands. The way of dealing
with this in-tree follows the approach added for
`ISD::matchUnaryPredicate` implemented in D94501.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D106575
I've setup the basic framework for the isGuaranteedNotToBeUndefOrPoison call and updated DAGCombiner::visitFREEZE to use it, further Opcodes can be handled when we have test coverage.
I'm not aware of any vector test freeze coverage so the DemandedElts (and the Depth) args are not being used yet - but they are in place.
SelectionDAG::isGuaranteedNotToBePoison wrappers have also been added.
Differential Revision: https://reviews.llvm.org/D106668
This adds custom lowering for truncating stores when operating on
fixed length vectors in SVE. It also includes a DAG combine to
fold extends followed by truncating stores into non-truncating
stores in order to prevent this pattern appearing once truncating
stores are supported.
Currently truncating stores are not used in certain cases where
the size of the vector is larger than the target vector width.
Differential Revision: https://reviews.llvm.org/D104471
Peilin Guo