Test added in r267248 exposed a bug in handling of dwarf produced by clang>=3.9, which causes a
crash during expression evaluation. Skip the test until this is sorted out.
llvm-svn: 267407
Make sure we figure out correct plt entry field in case linker has generated a small value below realistic entry size like 4 bytes or below.
Differential revision: http://reviews.llvm.org/D19252
llvm-svn: 267405
This option evaluates an expression and, if the result is of pointer type, treats it as if it was an array of that many elements and displays such elements
This has a couple subtle points but is mostly as straightforward as it sounds
Add a parray N <expr> alias for this new mode
Also, extend the --object-description mode to do the moral equivalent of the above but display each element in --object-description mode
Add a poarray N <expr> alias for this
llvm-svn: 267372
RegisterContextLLDB::InitializeNonZerothFrame already has code to attempt
to detect and handle the case where the PC points beyond the end of a
function, but there are certain cases where this doesn't work correctly.
In fact, there are *two* different places where this detection is attempted,
and the failure is in fact a result of an unfortunate interaction between
those two separate attempts.
First, the ResolveSymbolContextForAddress routine is called with the
resolve_tail_call_address flag set to true. This causes the routine
to internally accept a PC pointing beyond the end of a function, and
still resolving the PC to that function symbol.
Second, the InitializeNonZerothFrame routine itself maintains a
"decr_pc_and_recompute_addr_range" flag and, if that turns out to
be true, itself decrements the PC by one and searches again for
a symbol at that new PC value.
Both approaches correctly identify the symbol associated with the PC.
However, the problem is now that later on, we also need to find the
DWARF CFI record associated with the PC. This is done in the
RegisterContextLLDB::GetFullUnwindPlanForFrame routine, and uses
the "m_current_offset_backed_up_one" member variable.
However, that variable only actually contains the PC "backed up by
one" if the *second* approach above was taken. If the function was
already identified via the first approach above, that member variable
is *not* backed up by one but simply points to the original PC.
This in turn causes GetEHFrameUnwindPlan to not correctly identify
the DWARF CFI record associated with the PC.
Now, in many cases, if the first method had to back up the PC by one,
we *still* use the second method too, because of this piece of code:
// Or if we're in the middle of the stack (and not "above" an asynchronous event like sigtramp),
// and our "current" pc is the start of a function...
if (m_sym_ctx_valid
&& GetNextFrame()->m_frame_type != eTrapHandlerFrame
&& GetNextFrame()->m_frame_type != eDebuggerFrame
&& addr_range.GetBaseAddress().IsValid()
&& addr_range.GetBaseAddress().GetSection() == m_current_pc.GetSection()
&& addr_range.GetBaseAddress().GetOffset() == m_current_pc.GetOffset())
{
decr_pc_and_recompute_addr_range = true;
}
In many cases, when the PC is one beyond the end of the current function,
it will indeed then be exactly at the start of the next function. But this
is not always the case, e.g. if there happens to be alignment padding
between the end of one function and the start of the next.
In those cases, we may sucessfully look up the function symbol via
ResolveSymbolContextForAddress, but *not* set decr_pc_and_recompute_addr_range,
and therefore fail to find the correct DWARF CFI record.
A very simple fix for this problem is to just never use the first method.
Call ResolveSymbolContextForAddress with resolve_tail_call_address set
to false, which will cause it to fail if the PC is beyond the end of
the current function; or else, identify the next function if the PC
is also at the start of the next function. In either case, we will
then set the decr_pc_and_recompute_addr_range variable and back up the
PC anyway, but this time also find the correct DWARF CFI.
A related problem is that the ResolveSymbolContextForAddress sometimes
returns a "symbol" with empty name. This turns out to be an ELF section
symbol. Now, usually those get type eSymbolTypeInvalid. However, there
is code in ObjectFileELF::ParseSymbols that tries to change the type of
invalid symbols to eSymbolTypeCode or eSymbolTypeData if the symbol
lies within the code or data section.
Unfortunately, this check also hits the symbol for the code section
itself, which is then marked as eSymbolTypeCode. While the size of
the section symbol is 0 according to the ELF file, LLDB considers
this size invalid and attempts to figure out the "correct" size.
Depending on how this goes, we may end up with a symbol that overlays
part of the code section, even outside areas covered by real function
symbols.
Therefore, if we call ResolveSymbolContextForAddress with PC pointing
beyond the end of a function, we may get this bogus section symbol.
This again means InitializeNonZerothFrame thinks we have a valid PC,
but then we don't find any unwind info for it.
The fix for this problem is me to simply always leave ELF section
symbols as type eSymbolTypeInvalid.
Differential Revision: http://reviews.llvm.org/D18975
llvm-svn: 267363
This adds basic parsing of the EABI attributes section. This section contains
additional information about the target for which the file was built. Attempt
to infer additional architecture information from that section.
llvm-svn: 267291
Some older versions of clang emitted bit offsets that were negative and these bitfields would have their bitfield-ness stripped off and it would cause a clang assertion in clang assertions were enabled. I updated the bitfield C test to make sure we don't regress.
<rdar://problem/21082998>
llvm-svn: 267248
Conditionalise a variable definition which may be unused in certain compilations
due to the preprocessor. Protect the variable accordingly. NFC.
llvm-svn: 267247
Code was added in ClangExpressionParser::ClangExpressionParser that was calling through
the process w/o checking that it was good. Also, we were pretending that we could do something
reasonable if we had no target, but that's actually not true, so I check for a target at the
beginning of the constructor and don't make a compiler in that case.
<rdar://problem/25841198>
llvm-svn: 266944
This change moves all the test event handling and its related
ResultsFormatter classes out of the packages/Python/lldbsuite/test dir
into a packages/Python/lldbsuite/test_event package. Formatters are
moved into a sub-package under that.
I am limiting the scope of this change to just the motion and a few
minor issues caught by a static Python checker (e.g. removing unused
import statements).
This is a pre-step for adding package-level tests to the test event
system. I also intend to simplify test event results formatter selection
after I make sure this doesn't break anybody.
See:
http://reviews.llvm.org/D19288
Reviewed by:
Pavel Labath
llvm-svn: 266885
When stopping the private state thread, there was a race condition between the time the thread exits (resetting the HostThread object) and the time a Join was attempted, especially in the case of a timeout.
The previous workaround of copying the HostThread object is not enough, since on a Reset the internal thread stuff gets nulled out regardless of which HostThread object actually has Reset called on it, resulting in an attempt to dereference a null pointer on the subsequent call to Join from the copy as well.
Additionally, there was a race between the detach (called when stopping the process) and the stop itself, causing the stop to time out because it was waiting for the private state thread to see the stop state, but it had exited immediately after entering the detached state.
Patch by cameron314
Differential Revision: http://reviews.llvm.org/D19122
llvm-svn: 266733
Also does the following:
* adopts PEP8 naming convention for OptionalWith class (now
optional_with).
* moves test_runner/lldb_utils.py to lldbsuite/support/optional_with.py.
* packages tests in a subpackage of test_runner per recommendations in
http://the-hitchhikers-guide-to-packaging.readthedocs.org/en/latest/creation.html
Tests can be run from within pacakges/Python/lldbsuite/test via this
command:
python -m unittest discover test_runner
The primary cleanup this allows is avoiding the need to muck with the
PYTHONPATH variable from within the source files. This also aids some
of the static code checkers as they don't need to run code to determine
the proper python path.
llvm-svn: 266710
This ensure lldbinline.test_file paths are tracked as .py
files rather than .pyc files.
Also, this change adds an assert to the test infrastructure
if a filename that is not ending in .py is attempted to be
added to the test events infrastructure where we track test
results.
See:
http://reviews.llvm.org/D19215
Earlier revision reviewed by:
Pavel Labath
llvm-svn: 266664
The race boiled down to this:
If a test worker queue is able to run the test inferior and
clean up before the dosep.py listener socket is spun up, and
the worker queue is the last one (as would be the case when
there's only one test rerunning in the rerun queue), then
the test suite will exit the main loop before having a chance
to process any test events coming from the test inferior or
the worker queue job control.
I found this race to be far more likely on fast hardware.
Our Linux CI is one such example. While it will show
up primarily during meta test events generated by
a worker thread when a test inferior times out or
exits with an exceptional exit (e.g. seg fault), it only
requires that the OS takes longer to hook up the
listener socket than it takes for the final test inferior
and worker thread to shut down.
See:
http://reviews.llvm.org/D19214
reviewed by:
Pavel Labath
llvm-svn: 266624
At the moment almost every lit.site.cfg.in contains two lines comment:
## Autogenerated by LLVM/Clang configuration.
# Do not edit!
The patch adds variable LIT_SITE_CFG_IN_HEADER, that is replaced from
configure_lit_site_cfg with the note and some useful information.
llvm-svn: 266522
Summary:
Doing a pthread_detach while the thread is exiting can cause crashes or other mischief, so we
make sure the thread stays around long enough. The performance impact of the added
synchronization should be minimal, as the parent thread is already holding a mutex, so I am just
making sure it holds it for a little while longer. It's possible the new thread will block on
this mutex immediately after startup, but it should be unblocked really quickly and some
blocking is unavoidable if we actually want to have this synchronization.
Reviewers: tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D19153
llvm-svn: 266423
Recommit modified version of r266311 including build bot regression fix.
This differs from the original r266311 by:
- Fixing Scalar::Promote to correctly zero- or sign-extend value depending
on signedness of the *source* type, not the target type.
- Omitting a few stand-alone fixes that were already committed separately.
llvm-svn: 266422
This routine contained a stray "return false;" making part of the code
never executed. Also, the stack offset where to find on-stack arguments
was incorrect.
llvm-svn: 266417
Summary:
The original breakpoint location test was failing for linux, because the compilers here tend to
merge the full-object and subobject destructors even at -O0 (as a result, we are getting only 2
breakpoint locations, and not 4 as the test expected. The fixup in r266164 substantially weakened
the test, as it now did not check whether both kinds of destructors were being found.
Because of these contraints, I have altered the logic of the test. It sets the
breakpoint by name, and then independently verifies that the breakpoint is set on the correct
demangled symbol name (which is not very meaningful since both kinds of destructors demangle to
the same name) *and* the correct symbol address (which is obtained by looking up the mangled
symbol name).
Reviewers: clayborg
Subscribers: ovyalov, zturner, lldb-commits
Differential Revision: http://reviews.llvm.org/D19052
llvm-svn: 266416
Francis Ricci