Check if the appropriate counters for the specified mode are defined on
the target. This is checked before any other work is done.
Differential Revision: https://reviews.llvm.org/D71927
1. Execute `opt -run-twice a.ll` with in a terminal will crash.
https://bugs.llvm.org/show_bug.cgi?id=44382
2. `-run-twice` saves output into two buffers and compares them.
When outputing the result is disabled, that produces two empty string thus
they are going to be equal all the time resulting false-positive results.
The proposed solution is to generate the results even if the output will not be
emitted, as that is required for the comparision.
Differential Revision: https://reviews.llvm.org/D71967
This removes the `getTypeString` from readeobj source because it
almost duplicates the existent method: `ELFFile<ELFT>::getDynamicTagAsString`.
Side effect: now it prints "<unknown:>0xHEXVALUE" instead of "(unknown)" for unknown values.
llvm-readelf before this patch printed:
```
0x0000000012345678 (unknown) 0x8765432187654321
0x000000006abcdef0 (unknown) 0x9988776655443322
0x0000000076543210 (unknown) 0x5555666677778888
```
and now it prints:
```
0x0000000012345678 (<unknown:>0x12345678) 0x8765432187654321
0x000000006abcdef0 (<unknown:>0x6abcdef0) 0x9988776655443322
0x0000000076543210 (<unknown:>0x76543210) 0x5555666677778888
```
GNU reaedlf prints different thing:
```
0x0000000012345678 (<unknown>: 12345678) 0x8765432187654321
0x000000006abcdef0 (Operating System specific: 6abcdef0) 0x9988776655443322
0x0000000076543210 (Processor Specific: 76543210) 0x5555666677778888
```
I am not sure we want to follow GNU here. Even if we do, it should be separate
patch probably. The new output looks better and closer to GNU anyways,
and the code is a bit simpler.
Differential revision: https://reviews.llvm.org/D71835
Summary:
llvm-objdump will commonly error out when disassembling a Mach-O binary with
stab symbols, or when printing a Mach-O symbol table that includesstab symbols.
That is because the Mach-O N_OSO symbol has been modified to include the
bottom 8-bit value of the Mach-O's cpusubtype value in the section field. In
general, one cannot blindly assume a stab symbol's section field is valid
unless one has actually consulted the specification for the specific stab.
Since objdump mostly just walks the symbol table to get mnemonics for code
disassembly it's best for objdump to just ignore stab symbols. llvm-nm will
do a more complete and correct job of displaying Mach-O symbol table contents.
Reviewers: pete, lhames, ab, thegameg, jhenderson, MaskRay
Reviewed By: thegameg, MaskRay
Subscribers: MaskRay, rupprecht, seiya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71394
llvm-symbolizer is used by sanitizers to symbolize errors discovered by
sanitizer, but there's no way to pass options to llvm-symbolizer since
the tool is invoked directly by the sanitizer runtime. Therefore, we
don't have a way to pass options needed to find debug symbols such as
-dsym-hint or -debug-file-directory. This change enables reading options
from the LLVM_SYMBOLIZER_OPTS in addition to command line which can be
used to pass those additional options to llvm-symbolizer invocations
made by sanitizer runtime.
Differential Revision: https://reviews.llvm.org/D71668
as it causes a layering violation/dependency cycle:
llvm/lib/CodeGen/AsmPrinter/DwarfDebug.cpp -> llvm/DebugInfo/DWARF/DWARFExpression.h
llvm/include/llvm/DebugInfo/DWARF/DWARFOptimizer.h -> llvm/CodeGen/NonRelocatableStringpool.h
This reverts commit abc7f6800d.
That patch is extracted from the D70709. It moves CompileUnit, DeclContext
into llvm/DebugInfo/DWARF. It also adds new file DWARFOptimizer with
AddressesMap class. AddressesMap generalizes functionality
from RelocationManager.
Differential Revision: https://reviews.llvm.org/D71271
This is a natural clean-up after D71462/D71464.
It allows to define known section letters used for GNU style
in one place.
Differential revision: https://reviews.llvm.org/D71591
GNU uses `l` for SHF_X86_64_LARGE and `y` for SHF_ARM_PURECODE.
Lets follow.
To do this I had to refactor and refine how we print the help flags description.
It was too generic and inconsistent with GNU readelf.
Differential revision: https://reviews.llvm.org/D71464
Our logic that dumped the flags was buggy.
For LLVM style it dumped SHF_MASKPROC/SHF_MASKOS named constants, though
they are not flags, but masks.
For GNU style it was just very inconsistent with GNU which has logic
that is not straightforward. Imagine we have sh_flags == 0x90000000.
SHF_EXCLUDE ("E") has a value of 0x80000000 and SHF_MASKPROC is 0xf0000000.
GNU readelf will not print "E" or "Ep" in this case, but will print just
"p". It only will print "E" when no other processor flag is set.
I had to investigate the GNU source to find the algorithm and now our logic should
match it.
Differential revision: https://reviews.llvm.org/D71462
Summary: Names of GlobalVariables may not be preserved depending on compilation options, so prefer a structural diff
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71582
Summary:
llvm-cxxfilt wasn't correctly demangle COFF import thunk in those two
cases before:
* demangle in split mode (multiple words from commandline)
* the import thunk prefix was added no matter the later part of the
string can be demangled or not
Now llvm-cxxfilt should handle both case correctly.
Reviewers: compnerd, erik.pilkington, jhenderson
Reviewed By: jhenderson
Subscribers: jkorous, dexonsmith, ributzka, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71425
If a function requires optnone to trigger a crash, it must also have noline,
otherwise it will fail a verifier check.
Differential revision: https://reviews.llvm.org/D69522
Summary: This is a follow up on D71137 properly setting up the AsmTargetStreamer prior to AsmParser::Run call.
Reviewers: courbet, mstojanovic
Subscribers: tschuett, mikhail.ramalho, llvm-commits, petarj, atanasyan
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71468
.text sh_address=0x1000 sh_offset=0x1000
.data sh_address=0x3000 sh_offset=0x2000
In an objcopy -O binary output, the distance between two sections equal
their LMA differences (0x3000-0x1000), instead of their sh_offset
differences (0x2000-0x1000). This patch changes our behavior to match
GNU.
This rule gets more complex when the containing PT_LOAD has
p_vaddr!=p_paddr. GNU objcopy essentially computes
sh_offset-p_offset+p_paddr for each candidate section, and removes the
gap before the first address.
Added tests to binary-paddr.test to catch the compatibility problem.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D71035
This relieves ObjectLinkingLayer clients of the responsibility of holding the
memory manager. This makes it easier to select between RTDyldObjectLinkingLayer
(which already owned its memory manager factory) and ObjectLinkingLayer at
runtime as clients aren't required to hold a jitlink::MemoryManager field just
in case ObjectLinkingLayer is selected.
Summary:
This is a follow up for D70548.
Currently, variables with debug info coverage between 0% and 1% are put into
zero-bucket. D70548 changed the way statistics calculate a variable's coverage:
we began to use enclosing scope rather than a possible variable life range.
Thus more variables might be moved to zero-bucket despite they have some debug
info coverage.
The patch is to distinguish between a variable that has location info but
it's significantly less than its enclosing scope and a variable that doesn't
have it at all.
Reviewers: djtodoro, aprantl, dblaikie, avl
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71070
Summary:
This changes the representation of 'coverage buckets' in llvm-dwarfdump and
llvm-locstats to one that makes more clear what the buckets contain.
See some related details in D71070.
Reviewers: djtodoro, aprantl, cmtice, jhenderson
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71366
I've noticed that when we have all regular flags set, we print "WAEXMSILoGTx"
instead of "WAXMSILOGTCE" printed by GNU readelf.
It happens because:
1) We print SHF_EXCLUDE at the wrong place.
2) We do not recognize SHF_COMPRESSED, we print "x" instead of "C".
3) We print "o" instead of "O" for SHF_OS_NONCONFORMING.
This patch fixes differences and adds test cases.
Differential revision: https://reviews.llvm.org/D71418
After recent changes it is now seems possible to get rid of
printing '\n' before each error and warning. This makes the output
cleaner.
Differential revision: https://reviews.llvm.org/D71246
It is discussed here https://reviews.llvm.org/D71118#inline-643172
Currently when a version is empty, llvm-readelf prints:
"000: 0 (*local*) 2 (<corrupt>)"
But GNU readelf does not treat empty section as corrupt.
There is no sense in having empty versions anyways it seems, but
this change is for consistency with GNU.
Differential revision: https://reviews.llvm.org/D71243
ARMWinEHPrinter was already designed to handle linked PE images
(since d2941b43f4), but resolving symbols didn't consistently
take the image base into account (as linked images seldom have a
symbol table, except for in MinGW setups).
Win64EHDumper wasn't really designed to handle linked images (it would
crash if executed on such a file), but a few concepts (getSymbol,
taking a virtual address instead of a relocation, and
getSectionContaining for finding the section containing a certain
virtual address) can be borrowed from ARMWinEHPrinter.
Adjust ARMWinEHPrinter to print the address of the exception handler
routine as a VA instead of an RVA, consistently with other addresses
in the same printout, and make Win64EHDumper print addresses similarly
for image cases.
Differential Revision: https://reviews.llvm.org/D71303
If llvm-ar is installed at arm-pokymllib32-linux-gnueabi-llvm-ar, it may
think it is llvm-lib due to the "lib" substring.
Improve the heuristic to make all the following work as intended:
llvm-ar-9 (llvm-9 package on Debian)
llvm-ranlib.exe
Lib.exe (reported by D44808)
arm-pokymllib32-linux-gnueabi-llvm-ar (reported by D71030)
Reviewed By: raj.khem, rupprecht
Differential Revision: https://reviews.llvm.org/D71302
I was investigating a change previously discussed that eliminates an excessive
empty lines from the output when we report warnings and errors
(https://reviews.llvm.org/D70826#inline-639055) and found
that we need this refactoring or alike to achieve that.
The problem is that some of our functions that finds symbol versions just
fail instead of returning errors or printing warnings. Another problem
is that they might print a warning on the same line with the regular output.
In this patch I've splitted getting of the version information and dumping of it
for GNU printVersionSymbolSection(). I had to change a few methods to return
Error or Expected<> to do that properly.
Differential revision: https://reviews.llvm.org/D71118
Currently dwarfdump uses the ArchType to filter out architectures, which
is problematic for architectures like arm64e and x86_64h that map back
to arm64 and x86_64 respectively. The result is that the filter doesn't
work for these architectures because it matches all the variants. This
is especially bad because usually these architectures are the reason to
use the filter in the first place.
Instead, we should match the architecture based on the string name. This
means the filter works for the values printed by dwarfdump. It has the
unfortunate side effect of not working for aliases, like AArch64, but I
think that's worth the trade-off.
rdar://53653014
Differential revision: https://reviews.llvm.org/D71230
Summary:
The patch removes OffsetToFirstDefinition in the 'scope bytes total'
statistic computation. Thus it unifies the way the scope and the coverage
buckets are computed. The rationals behind that are the following:
1. OffsetToFirstDefinition was used to calculate the variable's life range.
However, there is no simple way to do it accurately, so the scope calculated
this way might be misleading. See D69027 for more details on the subject.
2. Both 'scope bytes total' and coverage buckets seem to be intended
to represent the same data in different ways. Otherwise, the statistics
might be controversial and confusing.
Note that the approach gives up a thorough evaluation of debug information
completeness (i.e. coverage buckets by themselves doesn't tell how good
the debug information is). Only changes in coverage over time make
a 'physical' sense.
Reviewers: djtodoro, aprantl, vsk, dblaikie, avl
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70548
This introduce a new helper which is used to parse the SHT_GNU_versym section.
LLVM/GNU styles implementations now use it to share the logic.
Differential revision: https://reviews.llvm.org/D71054
That refactoring moves NonRelocatableStringpool into common CodeGen folder.
So that NonRelocatableStringpool could be used not only inside dsymutil.
Differential Revision: https://reviews.llvm.org/D71068
The following changes enable llvm-ifs to handle the following merge conflicts:
* Weak + Strong symbol merging for the same symbol
* empty vs non-empty triple field
* empty vs non-empty object file format
Differential Revision: https://reviews.llvm.org/D70834
This patch removes the magic "main" JITDylib from ExecutionEngine. The main
JITDylib was created automatically at ExecutionSession construction time, and
all subsequently created JITDylibs were added to the main JITDylib's
links-against list by default. This saves a couple of lines of boilerplate for
simple JIT setups, but this isn't worth introducing magical behavior for.
ORCv2 clients should now construct their own main JITDylib using
ExecutionSession::createJITDylib and set up its linkages manually using
JITDylib::setSearchOrder (or related methods in JITDylib).
Build ID is a protocol for looking up debug files that's already
supported by various tools including debuggers. For example, when
locating debug files, gdb would check the following directories:
- /usr/lib/debug/.build-id/ab/cdef1234.debug
- /usr/bin/ls.debug
- /usr/bin/.debug/ls.debug
- /usr/lib/debug/usr/bin/ls.debug
llvm-symbolizer currently consults all of these except for build ID
based one. This patch implements support for build ID lookup. The
set of debug directories to search is specified by the new option:
--debug-file-directory, whose name matches the debug-file-directory
variable used by gdb for the same purpose.
Differential Revision: https://reviews.llvm.org/D70759
The functions lookForDIEsToKeep and keepDIEAndDependencies are mutually
recursive and can cause a stackoverflow for large projects. While this
has always been the case, it became a bigger issue when we parallelized
dsymutil, because threads get only a fraction of the stack space.
This patch removes the final recursive call from lookForDIEsToKeep. The
call was used to look at the current DIE's parent chain and mark
everything as kept.
This was tested by running dsymutil on clang built in debug (both with
and without modules) and comparing the MD5 hash of the generated dSYM
companion file.
Differential revision: https://reviews.llvm.org/D70994
The functions lookForDIEsToKeep and keepDIEAndDependencies are mutually
recursive and can cause a stackoverflow for large projects. While this
has always been the case, it became a bigger issue when we parallelized
dsymutil, because threads get only a fraction of the stack space.
In an attempt to tackle this issue, we removed part of the recursion in
r338536 by introducing a worklist. Processing of child DIEs was no
longer recursive. However, we still received bug reports where we'd run
out of stack space.
This patch removes another recursive call from lookForDIEsToKeep. The
call was used to look at DIEs that reference the current DIE. To make
this possible, we inlined keepDIEAndDependencies and added this work to
the existing worklist. Because the function is not tail recursive, we
needed to add two more types of worklist entries to perform the
subsequent work.
This was tested by running dsymutil on clang built in debug (both with
and without modules) and comparing the MD5 hash of the generated dSYM
companion file.
Differential revision: https://reviews.llvm.org/D70990
The PT_GNU_PROPERTY is generated by a linker to describe the
.note.gnu.property section. The Linux kernel uses this program header to
locate the .note.gnu.property section.
It is described in "The Linux gABI extension"
Include support for llvm-readelf, llvm-readobj and the yaml reader and
writers.
Differential Revision: https://reviews.llvm.org/D70959
We already have Symbols property to list regular symbols and
it is currently Optional<>. This patch makes DynamicSymbols to be optional
too. With this there is no need to define a dummy symbol anymore to trigger
creation of the .dynsym and it is now possible to define an empty .dynsym using
just the following line:
DynamicSymbols: []
(it is important to have when you do not want to have dynamic symbols,
but want to have a .dynsym)
Now the code is consistent and it helped to fix a bug: previously we
did not report an error when both Content/Size and an empty
Symbols/DynamicSymbols list were specified.
Differential revision: https://reviews.llvm.org/D70956
When dealing with system libraries which are absolute paths, use the
absolute path rather than the `-l` option. This ensures that the system
library can be properly linked against. This is needed to enable using
proper link dependencies in CMake.
Convert ARMCodeGenPrepare into a generic type promotion pass by:
- Removing the insertion of arm specific intrinsics to handle narrow
types as we weren't using this.
- Removing ARMSubtarget references.
- Now query a generic TLI object to know which types should be
promoted and what they should be promoted to.
- Move all codegen tests into Transforms folder and testing using opt
and not llc, which is how they should have been written in the
first place...
The pass searches up from icmp operands in an attempt to safely
promote types so we can avoid generating unnecessary unsigned extends
during DAG ISel.
Differential Revision: https://reviews.llvm.org/D69556
This revision is revised to update Go-bindings and Release Notes.
The original commit message follows.
This patch, adds support for DW_AT_alignment[DWARF5] attribute, to be emitted with typdef DIE.
When explicit alignment is specified.
Patch by Awanish Pandey <Awanish.Pandey@amd.com>
Reviewers: aprantl, dblaikie, jini.susan.george, SouraVX, alok,
deadalinx
Differential Revision: https://reviews.llvm.org/D70111
Miloš Stojanović