Making -g[no-]column-info opt out reduces the length of a typical CC1 command line.
Additionally, in a non-debug compile, we won't see -dwarf-column-info.
OpenCL 2.0 does not allow block arguments, primarily because it is
difficult to support function pointers on the various architectures
that OpenCL targets. Clang was still accepting them.
Rename and reuse the `err_opencl_half_param` diagnostic.
Fixes PR46324.
Differential Revision: https://reviews.llvm.org/D82313
This reverts commit defd43a5b3.
with correction to solve msan report
To solve https://bugs.llvm.org/show_bug.cgi?id=46166 where the
floating point settings in PCH files aren't compatible, rewrite
FPFeatures to use a delta in the settings rather than absolute settings.
With this patch, these floating point options can be benign.
Reviewers: rjmccall
Differential Revision: https://reviews.llvm.org/D81869
This reverts commit b55d723ed6.
Reapply Modify FPFeatures to use delta not absolute settings
To solve https://bugs.llvm.org/show_bug.cgi?id=46166 where the
floating point settings in PCH files aren't compatible, rewrite
FPFeatures to use a delta in the settings rather than absolute settings.
With this patch, these floating point options can be benign.
Reviewers: rjmccall
Differential Revision: https://reviews.llvm.org/D81869
Rather than pushing inactive cleanups for the block captures at the
entry of a full expression and activating them during the creation of
the block literal, just call pushLifetimeExtendedDestroy to ensure the
cleanups are popped at the end of the scope enclosing the block
expression.
rdar://problem/63996471
Differential Revision: https://reviews.llvm.org/D81624
Canonicalize on storing FP options in LangOptions instead of
redundantly in CodeGenOptions. Incorporate -ffast-math directly
into the values of those LangOptions rather than considering it
separately when building FPOptions. Build IR attributes from
those options rather than a mix of sources.
We should really simplify the driver/cc1 interaction here and have
the driver pass down options that cc1 directly honors. That can
happen in a follow-up, though.
Patch by Michele Scandale!
https://reviews.llvm.org/D80315
Sometimes you want to disable a FileCheck directive without removing
it entirely, or you want to write comments that mention a directive by
name. The `COM:` directive makes it easy to do this. For example,
you might have:
```
; X32: pinsrd_1:
; X32: pinsrd $1, 4(%esp), %xmm0
; COM: FIXME: X64 isn't working correctly yet for this part of codegen, but
; COM: X64 will have something similar to X32:
; COM:
; COM: X64: pinsrd_1:
; COM: X64: pinsrd $1, %edi, %xmm0
```
Without this patch, you need to use some combination of rewording and
directive syntax mangling to prevent FileCheck from recognizing the
commented occurrences of `X32:` and `X64:` above as directives.
Moreover, FileCheck diagnostics have been proposed that might complain
about the occurrences of `X64` that don't have the trailing `:`
because they look like directive typos:
<http://lists.llvm.org/pipermail/llvm-dev/2020-April/140610.html>
I think dodging all these problems can prove tedious for test authors,
and directive syntax mangling already makes the purpose of existing
test code unclear. `COM:` can avoid all these problems.
This patch also updates the small set of existing tests that define
`COM` as a check prefix:
- clang/test/CodeGen/default-address-space.c
- clang/test/CodeGenOpenCL/addr-space-struct-arg.cl
- clang/test/Driver/hip-device-libs.hip
- llvm/test/Assembler/drop-debug-info-nonzero-alloca.ll
I think lit should support `COM:` as well. Perhaps `clang -verify`
should too.
Reviewed By: jhenderson, thopre
Differential Revision: https://reviews.llvm.org/D79276
Sometimes you want to disable a FileCheck directive without removing
it entirely, or you want to write comments that mention a directive by
name. The `COM:` directive makes it easy to do this. For example,
you might have:
```
; X32: pinsrd_1:
; X32: pinsrd $1, 4(%esp), %xmm0
; COM: FIXME: X64 isn't working correctly yet for this part of codegen, but
; COM: X64 will have something similar to X32:
; COM:
; COM: X64: pinsrd_1:
; COM: X64: pinsrd $1, %edi, %xmm0
```
Without this patch, you need to use some combination of rewording and
directive syntax mangling to prevent FileCheck from recognizing the
commented occurrences of `X32:` and `X64:` above as directives.
Moreover, FileCheck diagnostics have been proposed that might complain
about the occurrences of `X64` that don't have the trailing `:`
because they look like directive typos:
<http://lists.llvm.org/pipermail/llvm-dev/2020-April/140610.html>
I think dodging all these problems can prove tedious for test authors,
and directive syntax mangling already makes the purpose of existing
test code unclear. `COM:` can avoid all these problems.
This patch also updates the small set of existing tests that define
`COM` as a check prefix:
- clang/test/CodeGen/default-address-space.c
- clang/test/CodeGenOpenCL/addr-space-struct-arg.cl
- clang/test/Driver/hip-device-libs.hip
- llvm/test/Assembler/drop-debug-info-nonzero-alloca.ll
I think lit should support `COM:` as well. Perhaps `clang -verify`
should too.
Reviewed By: jhenderson, thopre
Differential Revision: https://reviews.llvm.org/D79276
test cases
Add support for #pragma float_control
Reviewers: rjmccall, erichkeane, sepavloff
Differential Revision: https://reviews.llvm.org/D72841
This reverts commit 85dc033cac, and makes
corrections to the test cases that failed on buildbots.
Currently this asserts on anything other than errors. In one
workaround scenario, AMDGPU emits DiagnosticInfoUnsupported as a
warning for functions that can't be correctly codegened, but should
never be executed.
This reverts commit 61ba1481e2.
I'm reverting this because it breaks the lldb build with
incomplete switch coverage warnings. I would fix it forward,
but am not familiar enough with lldb to determine the correct
fix.
lldb/source/Plugins/TypeSystem/Clang/TypeSystemClang.cpp:3958:11: error: enumeration values 'DependentExtInt' and 'ExtInt' not handled in switch [-Werror,-Wswitch]
switch (qual_type->getTypeClass()) {
^
lldb/source/Plugins/TypeSystem/Clang/TypeSystemClang.cpp:4633:11: error: enumeration values 'DependentExtInt' and 'ExtInt' not handled in switch [-Werror,-Wswitch]
switch (qual_type->getTypeClass()) {
^
lldb/source/Plugins/TypeSystem/Clang/TypeSystemClang.cpp:4889:11: error: enumeration values 'DependentExtInt' and 'ExtInt' not handled in switch [-Werror,-Wswitch]
switch (qual_type->getTypeClass()) {
Introduction/Motivation:
LLVM-IR supports integers of non-power-of-2 bitwidth, in the iN syntax.
Integers of non-power-of-two aren't particularly interesting or useful
on most hardware, so much so that no language in Clang has been
motivated to expose it before.
However, in the case of FPGA hardware normal integer types where the
full bitwidth isn't used, is extremely wasteful and has severe
performance/space concerns. Because of this, Intel has introduced this
functionality in the High Level Synthesis compiler[0]
under the name "Arbitrary Precision Integer" (ap_int for short). This
has been extremely useful and effective for our users, permitting them
to optimize their storage and operation space on an architecture where
both can be extremely expensive.
We are proposing upstreaming a more palatable version of this to the
community, in the form of this proposal and accompanying patch. We are
proposing the syntax _ExtInt(N). We intend to propose this to the WG14
committee[1], and the underscore-capital seems like the active direction
for a WG14 paper's acceptance. An alternative that Richard Smith
suggested on the initial review was __int(N), however we believe that
is much less acceptable by WG14. We considered _Int, however _Int is
used as an identifier in libstdc++ and there is no good way to fall
back to an identifier (since _Int(5) is indistinguishable from an
unnamed initializer of a template type named _Int).
[0]https://www.intel.com/content/www/us/en/software/programmable/quartus-prime/hls-compiler.html)
[1]http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2472.pdf
Differential Revision: https://reviews.llvm.org/D73967
Currently the library is separately linked, but this isn't correct to
implement fast math flags correctly. Each module should get the
version of the library appropriate for its combination of fast math
and related flags, with the attributes propagated into its functions
and internalized.
HIP already maintains the list of libraries, but this is not used for
OpenCL. Unfortunately, HIP uses a separate --hip-device-lib argument,
despite both languages using the same bitcode library. Eventually
these two searches need to be merged.
An additional problem is there are 3 different locations the libraries
are installed, depending on which build is used. This also needs to be
consolidated (or at least the search logic needs to deal with this
unnecessary complexity).
The main purpose of introducing these builtins is to add a range
metadata [1, 1025) on the work group size loaded from dispatch
ptr, which cannot be done by source code.
Differential Revision: https://reviews.llvm.org/D76772
SPIRV2.0 Spec only specifies Linux mangling, however our downstream has
use for a Windows mangling for these types.
Unfortunately, the SPIRV
spec specifies a single mangling for all pipe types, despite clang
allowing overloading on these types. Because of this, this patch
chooses to mangle the read/writability and element type for the windows
mangling.
The windows manglings in the test all demangle according to demangler:
"void __cdecl test1(struct __clang::ocl_pipe<int,1>)
"void __cdecl test2(struct __clang::ocl_pipe<float,0>)
"void __cdecl test2(struct __clang::ocl_pipe<int,1>)
"void __cdecl test3(struct __clang::ocl_pipe<int const,1>)
"void __cdecl test4(struct __clang::ocl_pipe<union
__clang::__vector<unsigned char,3>,1>)
"void __cdecl test5(struct __clang::ocl_pipe<union
__clang::__vector<int,4>,1>)
"void __cdecl test_reserved_read_pipe(struct __clang::_ASCLglobal<struct
Person > * __ptr64,struct __clang::ocl_pipe<struct Person,1>)
Differential Revision: https://reviews.llvm.org/D75685
After a first attempt to fix the test-suite failures, my first recommit
caused the same failures again. I had updated CMakeList.txt files of
tests that needed -fcommon, but it turns out that there are also
Makefiles which are used by some bots, so I've updated these Makefiles
now too.
See the original commit message for more details on this change:
0a9fc9233e
This includes fixes for:
- test-suite: some benchmarks need to be compiled with -fcommon, see D75557.
- compiler-rt: one test needed -fcommon, and another a change, see D75520.
This reverts commit 737394c490.
The fp-model test was failing on platforms that enable denormal flushing
based on -ffast-math. This needs to reset to IEEE, not the default in
these cases.
Change-Id: Ibbad32f66d0d0b89b9c1173a3a96fb1a570ddd89
The IR hasn't switched the default yet, so explicitly add the ieee
attributes.
I'm still not really sure how the target default denormal mode should
interact with -fno-unsafe-math-optimizations. The target may have
selected the default mode to be non-IEEE based on the flags or based
on its true behavior, but we don't know which is the case. Since the
only users of a non-IEEE mode without a flag still support IEEE mode,
just reset to IEEE.
This reverts commit 0a9fc9233e.
Going to look at the asan failures.
I find the failures in the test suite weird, because they look
like compile time test and I don't understand how that can be
failing, but will have a brief look at that too.
This makes -fno-common the default for all targets because this has performance
and code-size benefits and is more language conforming for C code.
Additionally, GCC10 also defaults to -fno-common and so we get consistent
behaviour with GCC.
With this change, C code that uses tentative definitions as definitions of a
variable in multiple translation units will trigger multiple-definition linker
errors. Generally, this occurs when the use of the extern keyword is neglected
in the declaration of a variable in a header file. In some cases, no specific
translation unit provides a definition of the variable. The previous behavior
can be restored by specifying -fcommon.
As GCC has switched already, we benefit from applications already being ported
and existing documentation how to do this. For example:
- https://gcc.gnu.org/gcc-10/porting_to.html
- https://wiki.gentoo.org/wiki/Gcc_10_porting_notes/fno_common
Differential revision: https://reviews.llvm.org/D75056
norecurse function attr indicates the function is not called recursively
directly or indirectly.
Add norecurse to OpenCL functions, SYCL functions in device compilation
and CUDA/HIP kernels.
Although there is LLVM pass adding norecurse to functions, it only works
for whole-program compilation. Also FE adding norecurse can make that
pass run faster since functions with norecurse do not need to be checked
again.
Differential Revision: https://reviews.llvm.org/D73651
Fangrui Song