Windows itanium is nearly identical to windows-msvc (MS ABI for C, itanium for
C++). Enable the TLS support for the target similar to the MSVC model.
llvm-svn: 271797
The AVX2 v16i16 shift lowering works by unpacking to 2 x v8i32, performing the shift and then truncating the result.
The unpacking is used to place the values in the upper 16-bits so that we can correctly sign-extend for SRA shifts. Unfortunately we weren't ensuring that the lower 16-bits were zero to ensure that SHL correctly shifts in zero bits.
llvm-svn: 271796
This patch begins adding support for lowering to the XOP VPERMIL2PD/VPERMIL2PS shuffle instructions - adding the X86ISD::VPERMIL2 opcode and cleaning up the usage.
The internal llvm intrinsics were assuming the shuffle mask operand was the same type as the float/double input operands (I guess to simplify the intrinsic definitions in X86InstrXOP.td to a single value type). These needed changing to integer types (matching the clang builtin and the AMD intrinsics definitions), an auto upgrade path is added to convert old calls.
Mask decoding/target shuffle support will be added in future patches.
Differential Revision: http://reviews.llvm.org/D20049
llvm-svn: 271633
Summary:
In PR29973 Sanjay Patel reported an assertion failure when a certain
loop was optimized, for a target without SSE2 support. It turned out
this was because of the AVG pattern detection introduced in rL253952.
Prevent the assertion failure by bailing out early in
`detectAVGPattern()`, if the target does not support SSE2.
Also add a minimized test case.
Reviewers: congh, eli.friedman, spatel
Subscribers: emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D20905
llvm-svn: 271548
Introduced in r271244, this is probably undefined behaviour and asserts when
compiled with Visual C++ debug mode.
On further note, the loop is quadratic with regard to the number of successors
since removeSuccessor is linear and could probably be modified to linear time.
llvm-svn: 271278
This adds support to the backed to actually support SjLj EH as an exception
model. This is *NOT* the default model, and requires explicitly opting into it
from the frontend. GCC supports this model and for MinGW can still be enabled
via the `--using-sjlj-exceptions` options.
Addresses PR27749!
llvm-svn: 271244
Most often as not this is what it started out as, the extraction is zero-cost on AVX and the PMOVZX/PMOVSX folding logic is based around 128-bit loads.
llvm-svn: 270858
This patch is a first step towards a more extendible method of matching combined target shuffle masks.
Initially this just pulls out the existing basic mask matches and adds support for some 256/512 bit equivalents. Future patterns will require a number of features to be added but I wanted to keep this patch simple.
I hope we can avoid duplication between shuffle lowering and combining and share more complex pattern match functions in future commits.
Differential Revision: http://reviews.llvm.org/D19198
llvm-svn: 270230
This refactors the logic in X86 to avoid code duplication. It also
splits it in two steps: it first decides if a symbol is local to the DSO
and then uses that information to decide how to access it.
The first part is implemented by shouldAssumeDSOLocal. It is not in any
way specific to X86. In a followup patch I intend to move it to
somewhere common and reused it in other backends.
llvm-svn: 270209
Since the calls don't return, the instruction afterwards will never run,
and is just taking up unnecessary space in the binary.
Differential Revision: http://reviews.llvm.org/D20406
llvm-svn: 270109
with an additional fix to make RegAllocFast ignore undef physreg uses. It would
previously get confused about the "push %eax" instruction's use of eax. That
method for adjusting the stack pointer is used in X86FrameLowering::emitSPUpdate
as well, but since that runs after register-allocation, we didn't run into the
RegAllocFast issue before.
llvm-svn: 269949
Summary:
MONITORX/MWAITX instructions provide similar capability to the MONITOR/MWAIT
pair while adding a timer function, such that another termination of the MWAITX
instruction occurs when the timer expires. The presence of the MONITORX and
MWAITX instructions is indicated by CPUID 8000_0001, ECX, bit 29.
The MONITORX and MWAITX instructions are intercepted by the same bits that
intercept MONITOR and MWAIT. MONITORX instruction establishes a range to be
monitored. MWAITX instruction causes the processor to stop instruction execution
and enter an implementation-dependent optimized state until occurrence of a
class of events.
Opcode of MONITORX instruction is "0F 01 FA". Opcode of MWAITX instruction is
"0F 01 FB". These opcode information is used in adding tests for the
disassembler.
These instructions are enabled for AMD's bdver4 architecture.
Patch by Ganesh Gopalasubramanian!
Reviewers: echristo, craig.topper, RKSimon
Subscribers: RKSimon, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19795
llvm-svn: 269911
This patch moves the expansion of WIN_ALLOCA pseudo-instructions
into a separate pass that walks the CFG and lowers the instructions
based on a conservative estimate of the offset between the stack
pointer and the lowest accessed stack address.
The goal is to reduce binary size and run-time costs by removing
calls to _chkstk. While it doesn't fix all the code quality problems
with inalloca calls, it's an incremental improvement for PR27076.
Differential Revision: http://reviews.llvm.org/D20263
llvm-svn: 269828
The new X86 shuffle lowering can do just fine without transforming vselects
into vector_shuffles. It looks like the only thing this code does right now
is cause trouble - in particular, it can lead to combine/legalization infinite
loops.
Note that it's not completely NFC, since some of the shuffle masks get inverted,
which may cause slight differences further down the line. We may want to find
a way to invert those masks, but that's orthogonal to this commit.
This fixes the hang in PR27689.
llvm-svn: 269676
This patch uses PSHUFB to lower vector CTLZ and avoid (slower) scalarizations.
The leading zero count of each 4-bit nibble of the vector is determined by using a PSHUFB lookup. Pairs of results are then repeatedly combined up to the original element width.
Differential Revision: http://reviews.llvm.org/D20016
llvm-svn: 269646
This is similar to r268953, but for floating point and vector register
classes.
Explanations:
The setting of the inline asm constraints was implicitly relying on the
order of the register classes in the file generated by tablegen.
Since, we do not have any control on that order, make sure we do not
depend on it anymore.
llvm-svn: 268973
This reapplies commit r268796, with a fix for the setting of the inline asm
constraints. I.e., "mark" LOW32_ADDR_ACCESS_RBP as a GR variant, so that the
regular processing of the GR operands (setting of the subregisters) happens.
Original commit log:
[X86] Add a new LOW32_ADDR_ACCESS_RBP register class.
ABIs like NaCl uses 32-bit addresses but have 64-bit frame.
The new register class reflects those constraints when choosing a
register class for a address access.
llvm-svn: 268955
The setting of the inline asm constraints was implicitly relying on the
order of the register classes in the file generated by tablegen.
Since, we do not have any control on that order, make sure we do not
depend on it anymore.
llvm-svn: 268953
A number of libcalls don't exist in any particular lib but are, instead,
defined in math.h as inline functions (even in C mode!). Don't rely on
their existence when lowering @llvm.{cos,sin,floor,..}.f32, promote them
instead.
N.B. We had logic to handle FREM but were missing out on a number of
others. This change generalizes the FREM handling.
llvm-svn: 268875
Both Linux and kFreeBSD use glibc, so follow similiar code paths.
Add isTargetGlibc to check for this, and use it instead of isTargetLinux
in a few places.
Fixes PR22248 for kFreeBSD.
Differential Revision: http://reviews.llvm.org/D19104
llvm-svn: 268624
The result type of setcc is dependent on whether or not AVX512 is
present.
We had an X86-specific DAG-combine which assumed that the result type
should be i8 when it could be i1.
This meant that we would generate illegal setccs which LowerSETCC did
not like.
Instead, use an appropriate type and zero extend to i8.
Also, there were some scenarios where the fold should have fired but
didn't because we were overly cautious about the types. This meant that
we generated:
shrl $31, %edi
andl $1, %edi
kmovw %edi, %k0
kxnorw %k0, %k0, %k1
kshiftrw $15, %k1, %k1
kxorw %k1, %k0, %k0
kmovw %k0, %eax
instead of:
testl %edi, %edi
setns %al
This fixes PR27638.
llvm-svn: 268609
The callseq_end node must be glued with the TLS calls, otherwise,
the generic code will miss the uses of the returned value and will
mark it dead.
Moreover, TLSCall 64-bit pseudo must not set an implicit-use on RDI,
the pseudo uses the symbol address at this point not RDI and the
lowering will do the right thing.
llvm-svn: 267797
This effectively adds back the extractelt combine removed by r262358:
the direct case can still occur (because x86_mmx is special, see
r262446), but it's the indirect case that's now superseded by the
generic combine.
llvm-svn: 267651
We aren't currently making use of this in any successful mask decode and its actually incorrect as it inserts the wrong number of SM_SentinelUndef mask elements.
llvm-svn: 267350
Reused the ability to split constants of a type wider than the shuffle mask to work with masks generated from scalar constants transfered to xmm.
This fixes an issue preventing PSHUFB target shuffle masks decoding rematerialized scalar constants and also exposes the XOP VPPERM bug described in PR27472.
llvm-svn: 267343
CTTZ_ZERO_UNDEF can be custom lowered specially if CTLZ is supported. Otherwise CTTZ and CTTZ_ZERO_UNDEF are handled the same way by using CTPOP and bitmath.
llvm-svn: 266952
With this change, ideally IR pass can always generate llvm.stackguard
call to get the stack guard; but for now there are still IR form stack
guard customizations around (see getIRStackGuard()). Future SSP
customization should go through LOAD_STACK_GUARD.
There is a behavior change: stack guard values are not CSEed anymore,
since we should never reuse the value in case that it has been spilled (and
corrupted). See ssp-guard-spill.ll. This also cause the change of stack
size and codegen in X86 and AArch64 test cases.
Ideally we'd like to know if the guard created in llvm.stackprotector() gets
spilled or not. If the value is spilled, discard the value and reload
stack guard; otherwise reuse the value. This can be done by teaching
register allocator to know how to rematerialize LOAD_STACK_GUARD and
force a rematerialization (which seems hard), or check for spilling in
expandPostRAPseudo. It only makes sense when the stack guard is a global
variable, which requires more instructions to load. Anyway, this seems to go out
of the scope of the current patch.
llvm-svn: 266806
Using VPERMQ/VPERMPD allows memory folding of the (repeated) input where VINSERTI128/VINSERTF128 can not.
Differential Revision: http://reviews.llvm.org/D19228
llvm-svn: 266728
no functional change.
ExtraLoad and WrapperKind are been used only if (OpFlags == X86II::MO_GOTPCREL).
Differential Revision: http://reviews.llvm.org/D18942
llvm-svn: 266557
It is very likely that the swiftself parameter is alive throughout most
functions function so putting it into a callee save register should
avoid spills for the callers with only a minimum amount of extra spills
in the callees.
Currently the generated code is correct but unnecessarily spills and
reloads arguments passed in callee save registers, I will address this
in upcoming patches.
This also adds a missing check that for tail calls the preserved value
of the caller must be the same as the callees parameter.
Differential Revision: http://reviews.llvm.org/D18902
llvm-svn: 266252
Extend the existing lowering of vXi8 multiplies to support v64i8 on avx512bw targets.
I added the Lower512IntArith helper function to help with this - not sure how often this could be used in the future, but it seemed better than putting all that logic inside LowerMUL.
Differential Revision: http://reviews.llvm.org/D18937
llvm-svn: 265902
This is a cleanup patch for SSP support in LLVM. There is no functional change.
llvm.stackprotectorcheck is not needed, because SelectionDAG isn't
actually lowering it in SelectBasicBlock; rather, it adds check code in
FinishBasicBlock, ignoring the position where the intrinsic is inserted
(See FindSplitPointForStackProtector()).
llvm-svn: 265851
Re-apply r265450 which caused PR27245 and was reverted in r265559
because of a wrong generalization: the fetch_and_add->add_and_fetch
combine only works in specific, but pretty common, cases:
(icmp slt x, 0) -> (icmp sle (add x, 1), 0)
(icmp sge x, 0) -> (icmp sgt (add x, 1), 0)
(icmp sle x, 0) -> (icmp slt (sub x, 1), 0)
(icmp sgt x, 0) -> (icmp sge (sub x, 1), 0)
Original Message:
We only generate LOCKed versions of add/sub when the result is unused.
It often happens that the result is used, but only by a comparison. We
can optimize those out by reusing EFLAGS, which lets us use the proper
instructions, instead of having to fallback to LXADD.
Instead of doing this as an MI peephole (as we do for the other
non-LOCKed (really, non-MR) forms), do it in ISel. It becomes quite
tricky later.
This also makes it eventually possible to stop expanding and/or/xor
if the only user is an icmp (also see D18141).
This uses the LOCK ISD opcodes added by r262244.
Differential Revision: http://reviews.llvm.org/D17633
llvm-svn: 265636
Summary:
In the context of http://wg21.link/lwg2445 C++ uses the concept of
'stronger' ordering but doesn't define it properly. This should be fixed
in C++17 barring a small question that's still open.
The code currently plays fast and loose with the AtomicOrdering
enum. Using an enum class is one step towards tightening things. I later
also want to tighten related enums, such as clang's
AtomicOrderingKind (which should be shared with LLVM as a 'C++ ABI'
enum).
This change touches a few lines of code which can be improved later, I'd
like to keep it as NFC for now as it's already quite complex. I have
related changes for clang.
As a follow-up I'll add:
bool operator<(AtomicOrdering, AtomicOrdering) = delete;
bool operator>(AtomicOrdering, AtomicOrdering) = delete;
bool operator<=(AtomicOrdering, AtomicOrdering) = delete;
bool operator>=(AtomicOrdering, AtomicOrdering) = delete;
This is separate so that clang and LLVM changes don't need to be in sync.
Reviewers: jyknight, reames
Subscribers: jyknight, llvm-commits
Differential Revision: http://reviews.llvm.org/D18775
llvm-svn: 265602
Bionic has a defined thread-local location for the stack protector
cookie. Emit a direct load instead of going through __stack_chk_guard.
llvm-svn: 265481
We only generate LOCKed versions of add/sub when the result is unused.
It often happens that the result is used, but only by a comparison. We
can optimize those out by reusing EFLAGS, which lets us use the proper
instructions, instead of having to fallback to LXADD.
Instead of doing this as an MI peephole (as we do for the other
non-LOCKed (really, non-MR) forms), do it in ISel. It becomes quite
tricky later.
This also makes it eventually possible to stop expanding and/or/xor
if the only user is an icmp (also see D18141).
This uses the LOCK ISD opcodes added by r262244.
Differential Revision: http://reviews.llvm.org/D17633
llvm-svn: 265450
We can only perform a tail call to a callee that preserves all the
registers that the caller needs to preserve.
This situation happens with calling conventions like preserver_mostcc or
cxx_fast_tls. It was explicitely handled for fast_tls and failing for
preserve_most. This patch generalizes the check to any calling
convention.
Related to rdar://24207743
Differential Revision: http://reviews.llvm.org/D18680
llvm-svn: 265329
Implemented truncstore for KNL and skylake-avx512.
Covered vectors from v2i1 to v64i1. We save the value in bits (not in bytes) - v32i1 is saved in 4 bytes.
Differential Revision: http://reviews.llvm.org/D18740
llvm-svn: 265283
Add support for lowering with the MOVMSK instruction to extract vector element signbits to a GPR.
This is an early step towards more optimal handling of vector comparison results.
Differential Revision: http://reviews.llvm.org/D18741
llvm-svn: 265266
Follow-up to http://reviews.llvm.org/D18566 and http://reviews.llvm.org/D18676 -
where we noticed that an intermediate splat was being generated for memsets of
non-zero chars.
That was because we told getMemsetStores() to use a 32-bit vector element type,
and it happily obliged by producing that constant using an integer multiply.
The 16-byte test that was added in D18566 is now equivalent for AVX1 and AVX2
(no splats, just a vector load), but we have PR27141 to track that splat difference.
Note that the SSE1 path is not changed in this patch. That can be a follow-up.
This patch should resolve PR27100.
llvm-svn: 265161
Follow-up to D18566 - where we noticed that an intermediate splat was being
generated for memsets of non-zero chars.
That was because we told getMemsetStores() to use a 32-bit vector element type,
and it happily obliged by producing that constant using an integer multiply.
The tests that were added in the last patch are now equivalent for AVX1 and AVX2
(no splats, just a vector load), but we have PR27141 to track that splat difference.
In the new tests, the splat via shuffling looks ok to me, but there might be some
room for improvement depending on uarch there.
Note that the SSE1/2 paths are not changed in this patch. That can be a follow-up.
This patch should resolve PR27100.
Differential Revision: http://reviews.llvm.org/D18676
llvm-svn: 265148
Change isConsecutiveLoads to check that loads are non-volatile as this
is a requirement for any load merges. Propagate change to two callers.
Reviewers: RKSimon
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18546
llvm-svn: 265013
Fix for issue introduced D17297, where we were breaking early from the loop detecting consecutive loads which could leave us thinking a consecutive load with zeros was possible.
llvm-svn: 264922
XOP's VPPERM has some great 'permute operations' that it can do as well as part of shuffling the bytes of a 128-bit vector - in this case we use it to perform BITREVERSE in a single instruction.
llvm-svn: 264870
operations.
Specifically, we had code that tried to badly approximate reconstructing
all of the possible variations on addressing modes in two x86
instructions based on those in one pseudo instruction. This is not the
first bug uncovered with doing this, so stop doing it altogether.
Instead generically and pedantically copy every operand from the address
over to both new instructions, and strip kill flags from any register
operands.
This fixes a subtle bug seen in the wild where we would mysteriously
drop parts of the addressing mode, causing for example the index
argument in the added test case to just be completely ignored.
Hypothetically, this was an extremely bad miscompile because it actually
caused a predictable and leveragable write of a 64bit quantity to an
unintended offset (the first element of the array intead of whatever
other element was intended). As a consequence, in theory this could even
have introduced security vulnerabilities.
However, this was only something that could happen with an atomic
floating point add. No other operation could trigger this bug, so it
seems extremely unlikely to have occured widely in the wild.
But it did in fact occur, and frequently in scientific applications
which were using relaxed atomic updates of a floating point value after
adding a delta. Those would end up being quite badly miscompiled by
LLVM, which is how we found this. Of course, this often looks like
a race condition in the code, but it was actually a miscompile.
I suspect that this whole RELEASE_FADD thing was a complete mistake.
There is no such operation, and I worry that anything other than add
will get remarkably worse codegeneration. But that's not for this
change....
llvm-svn: 264845
If all a BUILD_VECTOR's source elements are the same bit (AND/XOR/OR) operation type and each has one constant operand, lower to a pair of BUILD_VECTOR and just apply the bit operation to the vectors.
The constant operands will form a constant vector meaning that we still only have a single BUILD_VECTOR to lower and we will have replaced all the scalarized operations with a single SSE equivalent.
Its not in our interest to start make a general purpose vectorizer from this, but I'm seeing enough of these scalar bit operations from the later legalization/scalarization stages to support them at least.
Differential Revision: http://reviews.llvm.org/D18492
llvm-svn: 264666
ICMP instruction selection fails on SKX and KNL for i1 operand.
I use XOR to resolve:
(A == B) is equivalent to (A xor B) == 0
Differential Revision: http://reviews.llvm.org/D18511
llvm-svn: 264566
Currently this is to mainly to prevent scalarization of integer division by constants.
Differential Revision: http://reviews.llvm.org/D18307
llvm-svn: 264511
LowerMul v32i8 on AVX2 needs to split the 256-bit sources to allow sign-extension back to v16i16 to occur. Since this is basically the same as Lower256IntArith we simplify by using that here instead.
llvm-svn: 264506
LowerShift was using the same code as Lower256IntArith to split 256-bit vectors into 2 x 128-bit vectors, so now we just call Lower256IntArith.
llvm-svn: 264403
KTEST instruction may be used instead of TEST in this case:
%int_sel3 = bitcast <8 x i1> %sel3 to i8
%res = icmp eq i8 %int_sel3, zeroinitializer
br i1 %res, label %L2, label %L1
Differential Revision: http://reviews.llvm.org/D18444
llvm-svn: 264298
This patch begins adding support for lowering to the XOP VPPERM instruction - adding the X86ISD::VPPERM opcode.
Differential Revision: http://reviews.llvm.org/D18189
llvm-svn: 264260
This should be hoisted further up so it can be used in DAGCombiner and other backends,
but I'm limiting the scope in the interest of patch minimalism.
It's not quite NFC because some of the replaced code was using an 'if' check rather
than a 'while' loop, so those cases would only look through a single bitcast.
llvm-svn: 264186
Improve vector extension of vectors on hardware without dedicated VSEXT/VZEXT instructions.
We already convert these to SIGN_EXTEND_VECTOR_INREG/ZERO_EXTEND_VECTOR_INREG but can further improve this by using the legalizer instead of prematurely splitting into legal vectors in the combine as this only properly helps for lowering to VSEXT/VZEXT.
Removes a lot of unnecessary any_extend + mask pattern - (Fix for PR25718).
Reapplied with a fix for PR26953 (missing vector widening legalization).
Differential Revision: http://reviews.llvm.org/D17932
llvm-svn: 264062
Improve computeZeroableShuffleElements to be able to peek through bitcasts to extract zero/undef values from BUILD_VECTOR nodes of different element sizes to the shuffle mask.
Differential Revision: http://reviews.llvm.org/D14261
llvm-svn: 263906
We were being too aggressive in trying to combine a shuffle into a blend-with-zero pattern, often resulting in a endless loop of contrasting combines
This patch stops the combine if we already have a blend in place (means we miss some domain corrections)
llvm-svn: 263717
Converting masked vector loads to regular vector loads for x86 AVX should always be a win.
I raised the legality issue of reading the extra memory bytes on llvm-dev. I did not see any
objections.
1. x86 already does this kind of optimization for multiple scalar loads -> vector load.
2. If other targets have the same flexibility, we could move this transform up to CGP or DAGCombiner.
Differential Revision: http://reviews.llvm.org/D18094
llvm-svn: 263446
The SSE41 v8i16 shift lowering using (v)pblendvb is great for non-constant shift amounts, but if it is constant then we can efficiently reduce the VSELECT to shuffles with the pre-SSE41 lowering.
llvm-svn: 263383
cmpxchg[8|16]b uses RBX as one of its argument.
In other words, using this instruction clobbers RBX as it is defined to hold one
the input. When the backend uses dynamically allocated stack, RBX is used as a
reserved register for the base pointer.
Reserved registers have special semantic that only the target understands and
enforces, because of that, the register allocator don’t use them, but also,
don’t try to make sure they are used properly (remember it does not know how
they are supposed to be used).
Therefore, when RBX is used as a reserved register but defined by something that
is not compatible with that use, the register allocator will not fix the
surrounding code to make sure it gets saved and restored properly around the
broken code. This is the responsibility of the target to do the right thing with
its reserved register.
To fix that, when the base pointer needs to be preserved, we use a different
pseudo instruction for cmpxchg that save rbx.
That pseudo takes two more arguments than the regular instruction:
- One is the value to be copied into RBX to set the proper value for the
comparison.
- The other is the virtual register holding the save of the value of RBX as the
base pointer. This saving is done as part of isel (i.e., we emit a copy from
rbx).
cmpxchg_save_rbx <regular cmpxchg args>, input_for_rbx_reg, save_of_rbx_as_bp
This gets expanded into:
rbx = copy input_for_rbx_reg
cmpxchg <regular cmpxchg args>
rbx = save_of_rbx_as_bp
Note: The actual modeling of the pseudo is a bit more complicated to make sure
the interferes that appears after the pseudo gets expanded are properly modeled
before that expansion.
This fixes PR26883.
llvm-svn: 263325
Improve vector extension of vectors on hardware without dedicated VSEXT/VZEXT instructions.
We already convert these to SIGN_EXTEND_VECTOR_INREG/ZERO_EXTEND_VECTOR_INREG but can further improve this by using the legalizer instead of prematurely splitting into legal vectors in the combine as this only properly helps for lowering to VSEXT/VZEXT.
Removes a lot of unnecessary any_extend + mask pattern - (Fix for PR25718).
Differential Revision: http://reviews.llvm.org/D17932
llvm-svn: 263303
Its not enough that we test for SSSE3 - that's only OK for 128-bit vectors - we also need to test for AVX2 / AVX512BW for 256/512 bit vector cases.
llvm-svn: 263239
Looking at the IR definition of a masked load made me realize
there was no reason to use a shuffle here, so we don't need
to convert the format of the mask at all.
llvm-svn: 263167
Generalise the existing SIGN_EXTEND to SIGN_EXTEND_VECTOR_INREG combine to support zero extension as well and get rid of a lot of unnecessary ANY_EXTEND + mask patterns.
Reapplied with a fix for PR26870 (avoid premature use of TargetConstant in ZERO_EXTEND_VECTOR_INREG expansion).
Differential Revision: http://reviews.llvm.org/D17691
llvm-svn: 263159
This patch reorders the combining of target shuffle masks so that when a unary shuffle takes a binary shuffle as its input but only references one of its inputs it can correctly combine into a unary shuffle mask.
This is starting to encroach on the purpose of resolveTargetShuffleInputs, but I don't want to remove it until we definitely know we won't need it for full binary shuffle combining.
There is a lot more work before we can properly support binary target shuffle masks but this was an easy case to add support for.
Differential Revision: http://reviews.llvm.org/D17858
llvm-svn: 263102
Operation SCALAR_TO_VECTOR for v64i8 and v32i16 should be lowered if BW feature is "on".
Differential Revision: http://reviews.llvm.org/D17994
llvm-svn: 263097
Instead of a variable-blend instruction, form a blend with immediate because those are always cheaper.
Differential Revision: http://reviews.llvm.org/D17899
llvm-svn: 263067
The fix consisting in using the library call for atomic compare and swap when
the instruction is not safe to use may be incorrect. Indeed the library call may
not exist on all platform. In other words, we need a better fix!
llvm-svn: 262943
Patch to add support for target shuffle combining of X86ISD::VPERMV3 nodes, including support for detecting unary shuffles.
This uncovered several issues with the X86ISD::VPERMV3 shuffle mask decoding of non-64 bit shuffle mask elements - the bit masking wasn't being correctly computed.
Removed non-constant pool mask decode path as we have no way of testing it right now.
Differential Revision: http://reviews.llvm.org/D17916
llvm-svn: 262809
Added support for decoding VPERMILPS variable shuffle masks that aren't in the constant pool.
Added target shuffle mask decoding for SCALAR_TO_VECTOR+VZEXT_MOVL cases - these can happen for v2i64 constant re-materialization
Followup to D17681
llvm-svn: 262784
When the lowering of the setjmp intrinsic requires
a global base pointer to be set, make sure such pointer
gets defined by the CGBR pass.
This fixes PR26742.
llvm-svn: 262762
cmpxchgXXb uses RBX as one of its implicit argument. I.e., when
we use that instruction we need to clobber RBX. This is generally
fine, expect when RBX is a reserved register because in that case,
the register allocator will not track its value and will not
save and restore it when interferences occur.
rdar://problem/24851412
llvm-svn: 262759
The x86 ret instruction has a 16 bit immediate indicating how many bytes
to pop off of the stack beyond the return address.
There is a problem when extremely large structs are passed by value: we
might not be able to fit the number of bytes to pop into the return
instruction.
To fix this, expand RET_FLAG a little later and use a special sequence
to clean the stack:
pop %ecx ; return address is now in %ecx
add $n, %esp ; clean the stack
push %ecx ; bring the return address back on the stack
ret ; pop the return address and jmp to it's value
llvm-svn: 262755
The variable mask form of VPERMILPD/VPERMILPS were only partially implemented, with much of it still performed as an intrinsic.
This patch properly defines the instructions in terms of X86ISD::VPERMILPV, permitting the opcode to be easily combined as a target shuffle.
Differential Revision: http://reviews.llvm.org/D17681
llvm-svn: 262635
That's not the case for VPERMV/VPERMV3, which cover all possible
combinations (the C intrinsics use a different order; the AVX vs
AVX512 intrinsics are different still).
Since:
r246981 AVX-512: Lowering for 512-bit vector shuffles.
VPERMV is recognized in getTargetShuffleMask.
This breaks assumptions in most callers, as they expect
the non-mask operands to start at index 0.
VPERMV has the mask as operand #0; VPERMV3 has it in the middle.
Instead of the faulty assumption, have getTargetShuffleMask return
its operands as well.
One alternative we considered was to change the operand order of
VPERMV, but we agreed to stick to the instruction order, as there
are more AVX512 weirdness to cover (vpermt2/vpermi2 in particular).
Differential Revision: http://reviews.llvm.org/D17041
llvm-svn: 262627
Generalise the existing SIGN_EXTEND to SIGN_EXTEND_VECTOR_INREG combine to support zero extension as well and get rid of a lot of unnecessary ANY_EXTEND + mask patterns.
Differential Revision: http://reviews.llvm.org/D17691
llvm-svn: 262599
The code was previously not able to track a boolean argument
at a call site back to the formal argument of the caller.
Differential Revision: http://reviews.llvm.org/D17786
llvm-svn: 262575
Catch objects with a displacement of zero do not initialize a catch
object. The displacement is relative to %rsp at the end of the
function's prologue for x86_64 targets.
If we place an object at the top-of-stack, we will end up wit a
displacement of zero resulting in our catch object remaining
uninitialized.
Address this by creating our catch objects as fixed objects. We will
ensure that the UnwindHelp object is created after the catch objects so
that no catch object will have a displacement of zero.
Differential Revision: http://reviews.llvm.org/D17823
llvm-svn: 262546
This reverts commit r262370.
It turns out there is code out there that does sequences of allocas
greater than 4K: http://crbug.com/591404
The goal of this change was to improve the code size of inalloca call
sequences, but we got tangled up in the mess of dynamic allocas.
Instead, we should come back later with a separate MI pass that uses
dominance to optimize the full sequence. This should also be able to
remove the often unneeded stacksave/stackrestore pairs around the call.
llvm-svn: 262505
We have a number of useful lowering strategies for VBROADCAST instructions (both from memory and register element 0) which the 128-bit form of the MOVDDUP instruction can make use of.
This patch tweaks lowerVectorShuffleAsBroadcast to enable it to broadcast 2f64 args using MOVDDUP as well.
It does require a slight tweak to the lowerVectorShuffleAsBroadcast mechanism as the existing MOVDDUP lowering uses isShuffleEquivalent which can match binary shuffles that can lower to (unary) broadcasts.
Differential Revision: http://reviews.llvm.org/D17680
llvm-svn: 262478
We modeled the RDFLAGS{32,64} operations as "using" {E,R}FLAGS.
While technically correct, this is not be desirable for folks who want
to examine aspects of the FLAGS register which are not related to
computation like whether or not CPUID is a valid instruction.
Differential Revision: http://reviews.llvm.org/D17782
llvm-svn: 262465
This isn't quite NFC because some of the SDLocs may change which could
cause scheduling differences. But no regression tests are affected and
there is no functional change intended.
llvm-svn: 262391
The _chkstk function is called by the compiler to probe the stack in an
order consistent with Windows' expectations. However, it is possible to
elide the call to _chkstk and manually adjust the stack pointer if we
can prove that the allocation is fixed size and smaller than the probe
size.
This shrinks chrome.dll, chrome_child.dll and chrome.exe by a
cummulative ~133 KB.
Differential Revision: http://reviews.llvm.org/D17679
llvm-svn: 262370
In the code below on 32-bit targets, x would previously get forwarded to g()
without sign-extension to 32 bits as required by the parameter attribute.
void g(signed short);
void f(unsigned short x) {
g(x);
}
llvm-svn: 262352
This is long-standing dirtiness, as acknowledged by r77582:
The current trick is to select it into a merge_values with
the first definition being an implicit_def. The proper solution is
to add new ISD opcodes for the no-output variant.
Doing this before selection will let us combine away some constructs.
Differential Revision: http://reviews.llvm.org/D17659
llvm-svn: 262244
This is one of the cases shown in:
https://llvm.org/bugs/show_bug.cgi?id=26701
Shift and negate is what InstCombine appears to prefer, so I've started with that pattern.
Note that the 'pcmpeq' instructions are always generating the negative one for the actual
'pcmpgt' comparison in each case (side note: why isn't there an alias mnemonic for that?).
Differential Revision: http://reviews.llvm.org/D17630
llvm-svn: 262036
Part 2 of 2
This patch add support for combining target shuffles into blends-with-zero.
Differential Revision: http://reviews.llvm.org/D17483
llvm-svn: 261745
Part 1 of 2
This patch attempts to replace the insertion of zero scalars with a vector blend with zero, avoiding the use of the integer insertion instructions (which are particularly slow on many targets).
(Part 2 will add support for combining multiple blends-with-zero).
Differential Revision: http://reviews.llvm.org/D17483
llvm-svn: 261743
PerformShuffleCombine should be usable by unary and binary target shuffles, but was attempting to get the first two operands whatever the instruction type. Since these are only used for VECTOR_SHUFFLE instructions for one particular combine I've moved them inside the relevant if statement.
llvm-svn: 261727
Add support for the case where we have a consecutive load (which must include the first + last elements) with a mixture of undef/zero elements. We load the vector and then apply a shuffle to clear the zero'd elements.
Differential Revision: http://reviews.llvm.org/D17297
llvm-svn: 261490
Fixed a bug introduced by D16683 when a binary shuffle is simplified to a unary shuffle (with undef/zero sentinel mask indices) - if this resulted in only the second input being used combineX86ShuffleChain failed to take this into account and still referenced the first input.
llvm-svn: 261434
First small step towards fixing PR26667 - we need to ensure that combineX86ShuffleChain only gets called with a valid shuffle input node (a similar issue was found in D17041).
llvm-svn: 261433
TLSADDR nodes are lowered into actuall calls inside MC. In order to prevent
shrink-wrapping from pushing prologue/epilogue past them (which result
in TLS variables being accessed before the stack frame is set up), we
put markers, so that the stack gets adjusted properly.
Thanks to Quentin Colombet for guidance/help on how to fix this problem!
llvm-svn: 261387
This is effectively NFC because Atom is the only in-order x86 subtarget currently,
but the predicate would have become wrong if any other in-order CPU came along.
See related discussion in:
http://reviews.llvm.org/D16836
llvm-svn: 261275
In r260133, LLVM was changed to no longer extend i8/i16 return values,
as it's not required by the ABI. However, code was found in the wild
that relies on the old behaviour on Darwin, so this commit reverts
back to that old behaviour for Darwin.
On other platforms, it's less likely that code would be depending on
the old behaviour, as GCC and MSVC haven't been extending such return
values.
llvm-svn: 261235
Bug description:
The bug was discovered when test was compiled with -O0.
In case scatter result is DAG root , VectorLegalizer failed (assert) due to LowerMSCATTER() return kmask as result.
Change LowerMSCATTER() to return chain as original node do.
Differential Revision: http://reviews.llvm.org/D17331
llvm-svn: 261090
AVX1 doesn't support the shuffling of 256-bit integer vectors. For 32/64-bit elements we get around this by shuffling as float/double but for 8/16-bit elements (assuming they can't widen) we currently just split, shuffle as 128-bit vectors and concatenate the results back.
This patch adds the ability to lower using the bit-blend patterns before defaulting to the splitting behaviour.
Part 2 of 2
Differential Revision: http://reviews.llvm.org/D17292
llvm-svn: 261082
AVX1 doesn't support the shuffling of 256-bit integer vectors. For 32/64-bit elements we get around this by shuffling as float/double but for 8/16-bit elements (assuming they can't widen) we currently just split, shuffle as 128-bit vectors and concatenate the results back.
This patch adds the ability to lower using the bit-mask patterns before defaulting to the splitting behaviour. In some cases this ends up matching what AVX2 would do anyhow or what AVX1 does on the split vectors.
Part 1 of 2
Differential Revision: http://reviews.llvm.org/D17292
llvm-svn: 261081
Avoid reuse of operand variables, keep them local to a particular lowering - the operand collection is unique to each case anyhow.
Renamed from V to Ops to more closely match their purpose.
llvm-svn: 261078
Currently, we sometimes miscompile this vector pattern:
(c ? -v : v)
We lower it to (because "c" is <4 x i1>, lowered as a vector mask):
(~c & v) | (c & -v)
When we have SSSE3, we incorrectly lower that to PSIGN, which does:
(c < 0 ? -v : c > 0 ? v : 0)
in other words, when c is either all-ones or all-zero:
(c ? -v : 0)
While this is an old bug, it rarely triggers because the PSIGN combine
is too sensitive to operand order. This will be improved separately.
Note that the PSIGN tests are also incorrect. Consider:
%b.lobit = ashr <4 x i32> %b, <i32 31, i32 31, i32 31, i32 31>
%sub = sub nsw <4 x i32> zeroinitializer, %a
%0 = xor <4 x i32> %b.lobit, <i32 -1, i32 -1, i32 -1, i32 -1>
%1 = and <4 x i32> %a, %0
%2 = and <4 x i32> %b.lobit, %sub
%cond = or <4 x i32> %1, %2
ret <4 x i32> %cond
if %b is zero:
%b.lobit = <4 x i32> zeroinitializer
%sub = sub nsw <4 x i32> zeroinitializer, %a
%0 = <4 x i32> <i32 -1, i32 -1, i32 -1, i32 -1>
%1 = <4 x i32> %a
%2 = <4 x i32> zeroinitializer
%cond = or <4 x i32> %a, zeroinitializer
ret <4 x i32> %a
whereas we currently generate:
psignd %xmm1, %xmm0
retq
which returns 0, as %xmm1 is 0.
Instead, use a pure logic sequence, as described in:
https://graphics.stanford.edu/~seander/bithacks.html#ConditionalNegate
Fixes PR26110.
Differential Revision: http://reviews.llvm.org/D17181
llvm-svn: 261023
If KMOVB not supported (require AVX512DQ) only KMOVW can be used so store size should be 2 bytes.
Differential Revision: http://reviews.llvm.org/D17138
llvm-svn: 260878
This patch attempts to represent a shuffle as a repeating shuffle (recognisable by is128BitLaneRepeatedShuffleMask) with the source input(s) in their original lanes, followed by a single permutation of the 128-bit lanes to their final destinations.
On AVX2 we can additionally attempt to match using 64-bit sub-lane permutation. AVX2 can also now match a similar 'broadcasted' repeating shuffle.
This patch has several benefits:
* Avoids prematurely matching with lowerVectorShuffleByMerging128BitLanes which can require both inputs to have their input lanes permuted before shuffling.
* Can replace PERMPS/PERMD instructions - although these are useful for cross-lane unary shuffling, they require their shuffle mask to be pre-loaded (and increase register pressure).
* Matching the repeating shuffle makes use of a lot of existing shuffle lowering.
There is an outstanding minor AVX1 regression (combine_unneeded_subvector1 in vector-shuffle-combining.ll) of a previously 128-bit shuffle + subvector splat being converted to a subvector splat + (2 instruction) 256-bit shuffle, I intend to fix this in a followup patch for review.
Differential Revision: http://reviews.llvm.org/D16537
llvm-svn: 260834
As shown in:
https://llvm.org/bugs/show_bug.cgi?id=23203
...we currently die because lowering believes that mfence is allowed without SSE2 on x86-64,
but the instruction def doesn't know that.
I don't know if allowing mfence without SSE is right, but if not, at least now it's consistently wrong. :)
Differential Revision: http://reviews.llvm.org/D17219
llvm-svn: 260828
I reinvented this functionality in http://reviews.llvm.org/D16828 because it was
hidden away as a static function. The changes in x86 are not based on a complete
audit. I suspect there are other possible uses there, and there are almost certainly
more potential users in other targets.
llvm-svn: 260295
As mentioned in http://reviews.llvm.org/D16828 , the related masked load transform
will need this logic, so I'm moving it out to make that patch smaller.
llvm-svn: 260240
On AVX2 target we are poorly legalizing SIGN_EXTEND ops for which the input's legalized type doesn't have the same number of elements as the destination, resulting in an ANY_EXTEND followed by a SIGN_EXTEND_INREG.
This patch uses the existing SIGN_EXTEND -> SIGN_EXTEND_VECTOR_INREG combine to extend the input to the size of the result and using SIGN_EXTEND_VECTOR_INREG instead.
Differential Revision: http://reviews.llvm.org/D16994
llvm-svn: 260210
As discussed on PR26491, this patch adds support for lowering v4f32 shuffles to the MOVLHPS/MOVHLPS instructions. It also adds support for memory folding with their MOVLPS/MOVHPS load equivalents.
This first patch only really helps SSE1 targets as SSE2+ targets will widen the shuffle mask and use v2f64 equivalents (although they still combine to MOVLHPS/MOVHLPS for v2f64 splats). This will have to be addressed in a future patch, most likely when we add support for binary target shuffle combines.
Differential Revision: http://reviews.llvm.org/D16956
llvm-svn: 260168
Another opportunity to reduce masked stores: in D16691, we decided not to attempt the 'one mask element is set'
transform in InstCombine, but this should be a win for any AVX machine.
Code comments note that this transform could be extended for other targets / cases.
Differential Revision: http://reviews.llvm.org/D16828
llvm-svn: 260145
This matches GCC and MSVC's behaviour, and saves on code size.
We were already not extending i1 return values on x86_64 after r127766. This
takes that patch further by applying it to x86 target as well, and also for i8
and i16.
The ABI docs have been unclear about the required behaviour here. The new i386
psABI [1] clearly states (Table 2.4, page 14) that i1, i8, and i16 return
vales do not need to be extended beyond 8 bits. The x86_64 ABI doc is being
updated to say the same [2].
Differential Revision: http://reviews.llvm.org/D16907
[1]. https://01.org/sites/default/files/file_attach/intel386-psabi-1.0.pdf
[2]. https://groups.google.com/d/msg/x86-64-abi/E8O33onbnGQ/_RFWw_ixDQAJ
llvm-svn: 260133
The combineX86ShufflesRecursively only supports unary shuffles, but was missing the opportunity to combine binary shuffles with a zero / undef second input.
This patch resolves target shuffle inputs, converting the shuffle mask elements to SM_SentinelUndef/SM_SentinelZero where possible. It then resolves the updated mask to check if we have created a faux unary shuffle.
Additionally, we now attempt to recursively call combineX86ShufflesRecursively for all input operands (we used to just recurse for unary integer shuffles and unary unpacks) - it safely returns early if its not a target shuffle.
Differential Revision: http://reviews.llvm.org/D16683
llvm-svn: 260063
Pulled out the code used by PSHUFB/VPERMV/VPERMV3 shuffle mask decoding into common helper functions.
The helper functions handle masks coming from BROADCAST/BUILD_VECTOR and ConstantPool nodes respectively.
llvm-svn: 260032
Simon Pilgrim