In rare cases, a region R which is itself not valid has an indirect child region
that is valid. When R becomes part of a valid region by expansion of another
region, then all children of R have to be erased from the set of valid regions.
This patch ensures that indirect children are erased in addition to direct
children.
Contributed-by: Armin Groesslinger <armin.groesslinger@uni-passau.de>
Tobias: I added a reduced test case and adjusted the logic of the patch to
only recurse until the first child is found.
llvm-svn: 200411
Verification of base addresses is difficult as the independent blocks pass may
introduce aliasing that was not there during scop detection. As a midterm
solution -polly-codegen-scev will remove the need for the independent blocks
pass. For now, we do not verify at compile time that the independent blocks pass
does not make the base addresses loop invariant. Disabling this just removes
one of the multiple safety layers we have. We still can check for correctness
in our regression tests.
llvm-svn: 200315
Array base addresses need to be invariant in the region considered. The base
address has to be computed outside the region, or, when it is computed inside,
the value must not change with the iterations of the loops. For example, when a
two-dimensional array is represented as a pointer to pointers the base address
A[i] in an access A[i][j] changes with i; therefore, such regions have to be
rejected.
Contributed by: Armin Größlinger <armin.groesslinger@uni-passau.de>
llvm-svn: 200314
This fixes a crash that appeared when generating dotty graphs for functions
without loops (for which we do not calculate polyhedral information).
llvm-svn: 198364
We now report the following:
$ polly-clang -O3 -mllvm -polly -mllvm -polly-report test.c -c \
-gline-tables-only
note: Polly detected an optimizable loop region (scop) in function 'foo'
test.c:2: Start of scop
test.c:3: End of scop
note: Polly detected an optimizable loop region (scop) in function 'bar'
test.c:9: Start of scop
test.c:13: End of scop
llvm-svn: 197558
String operations resulted by raw_string_ostream in the INVALID macro can lead
to significant compile-time overhead when compiling large size source code.
This is because raw_string_ostream relies on TypeFinder class, whose
compile-time cost increases as the size of the module increases. This patch
targets to ensure that it only track detection failures if actually needed.
In this way, we can avoid expensive string operations in normal execution.
With this patch file, the relative compile-time cost of Polly-detect pass does
not increase even when compiling very large size source code.
Contributed-by: Star Tan <tanmx_star@yeah.net>
llvm-svn: 187102
When a region header is part of a loop, then all entering edges of this region
should not come from the loop but outside the region. Otherwise, the loop may be
only partially part of the region, which would cause troubles in handling
induction variables.
Currently, we can only model induction variables that are either fully part of
the scop (loop induction variable) or induction variables that are scop-
invariant (parameter). A loop that is only partially part of the
scop causes troubles, as there is no good way to handle the induction
variable in the independent blocks pass.
Contributed-by: Star Tan <tanmx_star@yeah.net>
llvm-svn: 183800
Use the new cl::OptionCategory support to move the Polly options into a separate
option category. The aim is to hide most options and show by default only the
options a user needs to influence '-O3 -polly'. The available options probably
need some care, but here is the current status:
Polly Options:
Configure the polly loop optimizer
-enable-polly-openmp - Generate OpenMP parallel code
-polly - Enable the polly optimizer (only at -O3)
-polly-no-tiling - Disable tiling in the scheduler
-polly-only-func=<function-name> - Only run on a single function
-polly-report - Print information about the activities
of Polly
-polly-vectorizer - Select the vectorization strategy
=none - No Vectorization
=polly - Polly internal vectorizer
=unroll-only - Only grouped unroll the vectorize
candidate loops
=bb - The Basic Block vectorizer driven by
Polly
llvm-svn: 181295
Regions that have multiple entry edges are very common. A simple if condition
yields e.g. such a region:
if
/ \
then else
\ /
for_region
This for_region contains two entry edges 'then' -> 'for_region' and 'else' -> 'for_region'.
Previously we scheduled the RegionSimplify pass to translate such regions into
simple regions. With this patch, we now support them natively when the region is
in -loop-simplify form, which means the entry block should not be a loop header.
Contributed by: Star Tan <tanmx_star@yeah.net>
llvm-svn: 179586
Regions that have multiple exit edges are very common. A simple if condition
yields e.g. such a region:
if
/ \
then else
\ /
after
Region: if -> after
This regions contains the bbs 'if', 'then', 'else', but not 'after'. It has
two exit edges 'then' -> 'after' and 'else' -> 'after'.
Previously we scheduled the RegionSimplify pass to translate such regions into
simple regions. With this patch, we now support them natively.
Contributed-by: Star Tan <tanmx_star@yeah.net>
llvm-svn: 179159
Fix inspired from c2d4a0627e95c34a819b9d4ffb4db62daa78dade.
Given the following code
for (i = 0; i < 10; i++) {
;
}
S: A[i] = 0
When translate the data reference A[i] in statement S using scev, we need to
retrieve the scev of 'i' at the location of 'S'. If we do not do this the
scev that we obtain will be expressed as {0,+,1}_for and will reference loop
iterators that do not surround 'S'. What we really want is the scev to be
instantiated to the value of 'i' after the loop. This value is {10}.
This used to crash in:
int loopDimension = getLoopDepth(Expr->getLoop());
isl_aff *LAff = isl_aff_set_coefficient_si(
isl_aff_zero_on_domain(LocalSpace), isl_dim_in, loopDimension, 1);
(gdb) p Expr->dump()
{8,+,8}<nw><%do.body>
(gdb) p getLoopDepth(Expr->getLoop())
$5 = 0
isl_space *Space = isl_space_set_alloc(Ctx, 0, NbLoopSpaces);
isl_local_space *LocalSpace = isl_local_space_from_space(Space);
As we are trying to create a memory access in a stmt that is outside all loops,
LocalSpace has 0 dimensions:
(gdb) p NbLoopSpaces
$12 = 0
(gdb) p Statement.BB->dump()
if.then: ; preds = %do.end
%0 = load float* %add.ptr, align 4
store float %0, float* %q.1.reg2mem, align 4
br label %if.end.single_exit
and so the scev for %add.ptr should be taken at the place where it is used,
i.e., it should be the value on the last iteration of the do.body loop, and not
"{8,+,8}<nw><%do.body>".
llvm-svn: 179148
After this commit, polly is clang-format clean. This can be tested with
'ninja polly-check-format'. Updates to clang-format may change this, but the
differences will hopefully be both small and general improvements to the
formatting.
We currently have some not very nice formatting for a couple of items, DEBUG()
stmts for example. I believe the benefit of being clang-format clean outweights
the not perfect layout of this code.
llvm-svn: 177796
We now detect scops without a canonical induction variable and can generate a
polyhedral representation for them. There was no modification necessary to
code generate these scops.
llvm-svn: 177643
When using the scev based code generation, we now do not rely on the presence
of a canonical induction variable any more. This commit prepares the path to
(conditionally) disable the induction variable canonicalization pass.
llvm-svn: 177548
We now show the all members of the alias set that may couse possible aliasing.
In case a alias set member is not a named instruction (unnamed instructions or
constant expressions), we show the expression itself.
This improves our error message
from:
Possible aliasing for value: .reg2mem
to:
Possible aliasing: ".reg2mem",
"[0 x double]* inttoptr (i64 47255179264 to [0 x double]*)
llvm-svn: 174329
We fix the following formatting problems found by clang-format:
- 80 cols violations
- Obvious problems with missing or too many spaces
- multiple new lines in a row
clang-format suggests many more changes, most of them falling in the following
two categories:
1) clang-format does not at all format a piece of code nicely
2) The style that clang-format suggests does not match the style used in
Polly/LLVM
I consider differences caused by reason 1) bugs, which should be fixed by
improving clang-format. Differences due to 2) need to be investigated closer
to understand the cause of the difference and the solution that should be taken.
llvm-svn: 171241
If the flags '-polly-report -g' are given, we print file name and line numbers
for the beginning and end of all detected scops.
linear-algebra/kernels/gemm/gemm.c:23: Scop start
linear-algebra/kernels/gemm/gemm.c:42: Scop end
linear-algebra/kernels/gemm/gemm.c:77: Scop start
linear-algebra/kernels/gemm/gemm.c:82: Scop end
llvm-svn: 167235
Tobias Grosser