Also added some target-level search functions so that persistent variables and
symbols can be searched for without hand-iterating across the map of
TypeSystems.
llvm-svn: 249027
GP registers for o32 applications were always giving zero value because SetType() on the RegisterValue was causing the accessor functions to pickup the value from m_scalar of RegisterValue which is zero.
In this patch byte size and byte order of register value is set at the time of setting the value of the register.
llvm-svn: 249020
Run the getprop command with AdbClient::Shell instead of
Platform::RunShellCommand because getting the output from getprop
with Platform::RunShellCommand have some (currently unknown) issues.
llvm-svn: 249014
Change the way we detect if we have to place a thumb breakpoint instead
of an arm breakpoint in the case when no symbol table or mapping symbols
are available. Detect it based on the LSB of the FileAddress instead of
the LSB of the LoadAddress because the LSB of the LoadAddress is already
masked out.
llvm-svn: 249013
The hack is there to work around an incorrect load address reported
by the android linker on API 21 and 22 devices. This CL restricts the
hack to those android API levels.
Differential revision: http://reviews.llvm.org/D13288
llvm-svn: 249012
introduced by r235737 but I didn't look into it too closely).
A dSYM can have a per-UUID plist in it which tells lldb where
to find an executable binary for the dSYM (DBGSymbolRichExecutable)
- other information can be included in this plist, like how to
remap the source file paths from their build pathnames to their
long-term storage pathnames.
This per-UUID plist is a unusual; it is used probably exclusively
inside apple with our build system. It is not created by default
in normal dSYMs.
The problem was like this:
1. lldb wants to find an executable, given only a UUID
(this happens when lldb is doing cross-host debugging
and doesn't have a copy of the target system's binaries)
2. It eventually calls LocateMacOSXFilesUsingDebugSymbols
which does a spotlight search for the dSYM on the local
system, and failing that, tries the DBGShellCommands
command to find the dSYM.
3. It gets a dSYM. It reads the per-UUID plist in the dSYM.
The dSYM has a DBGSymbolRichExecutable kv pair pointing to
the binary on a network filesystem.
4. Using the binary on the network filesystem, lldb now goes
to find the dSYM.
5. It starts by looking for a dSYM next to the binary it found.
6. lldb is now reading the dSYM over a network filesystem,
ignoring the one it found on its local filesystem earlier.
Everything still *works* but it's much slower.
This would be a tricky one to write up in a testsuite case;
you really need the binary to not exist on the local system.
And LocateMacOSXFilesUsingDebugSymbols will only compile on
Mac OS X - even if I found a way to write up a test case, it
would not run anywhere but on a mac.
One change Greg wanted while I was touching this code was to
have LocateMacOSXFilesUsingDebugSymbols (which could be asked
to find a binary OR find a dSYM) to instead return a ModuleSpec
with the sum total of everything it could find. This
change of passing around a ModuleSpec instead of a FileSpec
was percolated up into ModuleList::GetSharedModule.
The changes to LocateMacOSXFilesUsingDebugSymbols look larger
than they really are - there's a lot of simple whitespace changes
in there.
I ran the testsuites on mac, no new regressions introduced
<rdar://problem/21993813>
llvm-svn: 248985
This is meant to support languages that have a scripting mode with top-level code that acts as global
For now, this flag only controls whether 'frame variable' will attempt to treat globals as locals when within such a function
llvm-svn: 248960
the corresponding TypeSystem. This makes sense because what kind of data there
is -- and how it can be looked up -- depends on the language.
Functionality that is common to all type systems is factored out into
PersistentExpressionState.
llvm-svn: 248934
.ARM.exidx/.ARM.extab sections contain unwind information used on ARM
architecture from unwinding from an exception.
Differential revision: http://reviews.llvm.org/D13245
llvm-svn: 248903
On android when debugging an apk we run lldb-server as application user
because the sell user (on non-rooted device) can't attach to an
application. The problem is that "adb pull" will run as a shell user
what can't access to files created by lldb-server because they will be
owned by the application user. This CL changes the oat symbolization
code to run "oatdump --symbolize" to generate an output what is owned
by the shell user.
Differential revision: http://reviews.llvm.org/D13162
llvm-svn: 248788
There are still a bunch of dependencies on the plug-in, but this helps to
identify them.
There are also a few more bits we need to move (and abstract, for example the
ClangPersistentVariables).
llvm-svn: 248612
See:
https://llvm.org/bugs/show_bug.cgi?id=24926
for details. On OS X, when LLDB.framework is
not part of the lldb.dylib path, the supporting
executable path is resolved to be the bin directory
sitting next to the lib directory with the dylib
lives. Not a perfect solution, but we also can't
base it on the executable path since both Python
and the lldb driver can be the executable.
llvm-svn: 248545
Summary: This is no longer needed as this file no longer calls backtrace().
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13049
llvm-svn: 248457
And remove the switch default, so that the -Wcovered-switch-default
warning will catch new types next time they're added.
Differential Revision: http://reviews.llvm.org/D13096
llvm-svn: 248414
Summary:
With this change DWARFASTParserClang::CompleteTypeFromDWARF returns false if
DWARFASTParserClang::ParseChildMembers returns false. Similarly, it returns
false if any base class is of an incomplete type. This helps in cases like
these:
class Foo
{
public:
std::string str;
};
...
Foo f;
If a file with the above code is compiled with a modern clang but without
the -fno-limit-debug-info (or similar) option, then the DWARF has only
a forward declration for std::string. In which case, the type for
"class Foo" cannot be completed. If LLDB does not detect that a child
member has incomplete type, then it wrongly conveys to clang (the LLDB
compiler) that "class Foo" is complete, and consequently crashes due to
an assertion failure in clang when running commands like "p f" or
"frame var f".
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13066
llvm-svn: 248401
Summary:
The following situation occured in TestAttachResume:
The inferior was stoped at a breakpoint and we did a continue, immediately followed by a detach.
Since there was a trap instruction under the IP, the continue did a step-over-breakpoint before
resuming the inferior for real. In some cases, the detach command was executed between these two
events (after the step-over stop, but before continue). Here, public state was running, but
private state was stopped. This caused a problem because HaltForDestroyOrDetach was checking the
public state to see whether it needs to stop the process (call Halt()), but Halt() was checking
the private state and concluded that there is nothing for it to do.
Solution: Instead of Halt() call SendAsyncInterrupt(), which will then cause Halt() to be
executed in the context of the private state thread. I also rename HaltForDestroyOrDetach to
reflect it does not call halt directly.
Reviewers: jingham, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13056
llvm-svn: 248371
Summary:
In bug 24074, the type information is not shown
correctly. This commit includes the following -
-> Changes for displaying correct type based on
current lexical scope for the command "image
lookup -t"
-> The corresponding testcase.
Reviewers: jingham, ovyalov, spyffe, richard.mitton, clayborg
Differential Revision: http://reviews.llvm.org/D12404
llvm-svn: 248366
Summary:
The default case doesn't need to be here as the switch covers
all possible values. If there's a new "lazy bool" value added
in the future, the compiler would start to warn about the new
case not being covered.
Reviewers: granata.enrico, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13084
llvm-svn: 248365
Different type system may have different notions of attributes of a type that do not matter for data formatters matching purposes
For instance, in the case of clang types, we remove some qualifiers (e.g. "volatile") as it doesn't make much sense to differentiate volatile T from T in the data formatters
This new API allows each type system to generate, if needed, a type that does not have those unwanted attributes that the data formatters can then consume to generate matches
llvm-svn: 248359
on iOS devices; fallout from Vince's cleanups made
in r237218 back in May. iOS native lldbs will call
StartDebugserverProcess() with a random port #
(see ProcessGDBRemote::LaunchAndConnectToDebugserver)
and neither side of this conditional expression should
be followed in that case.
I added an "if (in_port == 0) { ..." check around the
entire if/then/else and indented the block of code so
the diff looks larger than it really is.
<rdar://problem/21712643>
llvm-svn: 248343
The argdumper-based launching is more friendly to System Integrity Protection, and will work on older releases of OS X as well
Leave non-Apple builds alone
llvm-svn: 248338
This is meant to cover cases such as the obvious
Base *base = new Derived();
where GetDynamicTypeAndAddress(base) would return the type "Derived", not "Derived *"
llvm-svn: 248315
Summary:
This is no longer related to Clang and is just an opaque pointer
to data for a compiler type.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13039
llvm-svn: 248288
Summary:
pthread_setname_np() is a nonstandard GNU extension and isn't available
in every C library. Check before it's usage that GLIBC is available or
that we are targeting Android.
Reviewers: clayborg, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13019
llvm-svn: 248280
After the std::move operation the unique pointer is null.
So this statement always returns a null pointer.
Also remove unnecessary call to Module::ParseAllDebugSymbols(),
which spews errors due to how it incorrectly tries to parse DWARF DIE types.
llvm-svn: 248274
Summary:
Normally, these macros are defined in fnctl.h. However, GLIBC exposes their
definition through <sys/file.h> too. This change allows us to compile
LLDB with non-GLIBC C libraries.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13022
llvm-svn: 248255
This patch adds some of the groundwork required for tracking the lifetime of scripts and allocations and collecting data associated with them during execution.
Committed on behalf of Aidan Dodds.
Authored by: ADodds
Reviewed by: clayborg, jingham
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12936
llvm-svn: 248149
Both GNU AS and LLVM emits language type DW_LANG_Mips_Assembler for
all assembly code.
Differential revision: http://reviews.llvm.org/D12962
llvm-svn: 248146
We use the symbolic link to resolver to find the target of the LLDB shlib
symlink if there is a symlink. This allows us to find shlib-relative resources
even when running under the testsuite, where _lldb.so is a symlink in the Python
resource directory.
Also changed a comment to be slightly more clear about what resolve_path in the
constructor for FileSpec means, since if we were actually using realpath() this
code wouldn't have been necessary.
http://reviews.llvm.org/D12984
llvm-svn: 248048
Summary:
With the recent changes to separate clang from the core structures
of LLDB, many inclusions of clang headers can be removed.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12954
llvm-svn: 248004
For C++ and ObjC, dynamic values are always (at least somewhat) pointer-like in nature, so a ValueType of scalar is actually good enough that it could originally be hardcoded as the right choice
Other languages, might have broader notions of things that are dynamic (e.g. a language where a value type can be dynamic). In those cases, it might actually be the case that a dynamic value is a pointer-to the data, or even a host address if dynamic expression results entirely in host space are being talked about
This patch enables the language runtime to make that decision, and makes ValueObjectDynamicValue comply with it
llvm-svn: 247957
This cleans up type systems to be more pluggable. Prior to this we had issues:
- Module, SymbolFile, and many others has "ClangASTContext &GetClangASTContext()" functions. All have been switched over to use "TypeSystem *GetTypeSystemForLanguage()"
- Cleaned up any places that were using the GetClangASTContext() functions to use TypeSystem
- Cleaned up Module so that it no longer has dedicated type system member variables:
lldb::ClangASTContextUP m_ast; ///< The Clang AST context for this module.
lldb::GoASTContextUP m_go_ast; ///< The Go AST context for this module.
Now we have a type system map:
typedef std::map<lldb::LanguageType, lldb::TypeSystemSP> TypeSystemMap;
TypeSystemMap m_type_system_map; ///< A map of any type systems associated with this module
- Many places in code were using ClangASTContext static functions to place with CompilerType objects and add modifiers (const, volatile, restrict) and to make typedefs, L and R value references and more. These have been made into CompilerType functions that are abstract:
class CompilerType
{
...
//----------------------------------------------------------------------
// Return a new CompilerType that is a L value reference to this type if
// this type is valid and the type system supports L value references,
// else return an invalid type.
//----------------------------------------------------------------------
CompilerType
GetLValueReferenceType () const;
//----------------------------------------------------------------------
// Return a new CompilerType that is a R value reference to this type if
// this type is valid and the type system supports R value references,
// else return an invalid type.
//----------------------------------------------------------------------
CompilerType
GetRValueReferenceType () const;
//----------------------------------------------------------------------
// Return a new CompilerType adds a const modifier to this type if
// this type is valid and the type system supports const modifiers,
// else return an invalid type.
//----------------------------------------------------------------------
CompilerType
AddConstModifier () const;
//----------------------------------------------------------------------
// Return a new CompilerType adds a volatile modifier to this type if
// this type is valid and the type system supports volatile modifiers,
// else return an invalid type.
//----------------------------------------------------------------------
CompilerType
AddVolatileModifier () const;
//----------------------------------------------------------------------
// Return a new CompilerType adds a restrict modifier to this type if
// this type is valid and the type system supports restrict modifiers,
// else return an invalid type.
//----------------------------------------------------------------------
CompilerType
AddRestrictModifier () const;
//----------------------------------------------------------------------
// Create a typedef to this type using "name" as the name of the typedef
// this type is valid and the type system supports typedefs, else return
// an invalid type.
//----------------------------------------------------------------------
CompilerType
CreateTypedef (const char *name, const CompilerDeclContext &decl_ctx) const;
};
Other changes include:
- Removed "CompilerType TypeSystem::GetIntTypeFromBitSize(...)" and CompilerType TypeSystem::GetFloatTypeFromBitSize(...) and replaced it with "CompilerType TypeSystem::GetBuiltinTypeForEncodingAndBitSize(lldb::Encoding encoding, size_t bit_size);"
- Fixed code in Type.h to not request the full type for a type for no good reason, just request the forward type and let the type expand as needed
llvm-svn: 247953
If a breakpoint was hit in the inferior after shutdown had
started but before it was complete, it would cause an unclean
terminate of the inferior, leading to various problems the most
visible of which is that handles to the inferior executable would
remain locked, and the test suite would fail to run subsequent
tests because it could not recompile the inferior.
This fixes a major source of flakiness in the test suite.
llvm-svn: 247929
Character with ASCII code 0 is incorrectly treated by LLDB as the end of
RSP packet. The left of the debugger server output is silently ignored.
Patch from evgeny.leviant@gmail.com
Reviewed by: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12523
llvm-svn: 247908
The Go runtime schedules user level threads (goroutines) across real threads.
This adds an OS plugin to create memory threads for goroutines.
It supports the 1.4 and 1.5 go runtime.
Differential Revision: http://reviews.llvm.org/D5871
llvm-svn: 247852
The implications of this bug where that "log disable windows" would
not actually disable the log, and worse it would lock the file handle
making it impossible to delete the file until lldb was shut down.
This was then causing the test suite to fail, because the test suite
tries to delete log files in certain situations.
llvm-svn: 247841
Summary: Supports the parsing of the "using namespace XXX" and "using XXX::XXX" directives. Added ambiguity errors when it two decls with the same name are encountered (see comments in TestCppNsImport). Fixes using directives being duplicated for anonymous namespaces. Fixes GetDeclForUID for specification DIEs.
Reviewers: sivachandra, chaoren, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12897
llvm-svn: 247836
Split-dwarf uses a different header format to specify the address range
for the elements of the location lists.
Differential revision: http://reviews.llvm.org/D12880
llvm-svn: 247789
GCC don't use the is_prologue_end flag to mark the first instruction
after the prologue. Instead of it it is issuing a line table entry for
the first instruction of the prologue and one for the first instruction
after the prologue. If the size of the prologue is 0 instruction then
the 2 line entry will have the same file address.
We remove these duplicates entries as they are violating the dwarf spec
and can cause confusion in the debugger. To prevent the lost of
information about the end of prologue we should set the prologue end
flag for the line entries what are representing more then 1 entry.
Differential revision: http://reviews.llvm.org/D12757
llvm-svn: 247788
Use Breakpoint::AddName to mark all RenderScript kernel breakpoints with the name 'RenderScriptKernel'.
Also update logging channels to include LIBLLDB_LOG_BREAKPOINT where appropriate.
llvm-svn: 247782
SUMMARY:
Refer to http://lists.llvm.org/pipermail/lldb-dev/2015-August/008024.html for discussion
on this topic. Bare-iron target like YAMON gdb-stub does not support qProcessInfo, qC,
qfThreadInfo, Hg and Hc packets. Reply from ? packet is as simple as S05. There is no
packet which gives us process or threads information. In such cases, assume pid=tid=1.
Reviewers: clayborg
Subscribers: nitesh.jain, mohit.bhakkad, sagar, bhushan and lldb-commits
Differential Revision: http://reviews.llvm.org/D12876
llvm-svn: 247773
Summary: SymbolFileDWARF now creates VarDecl and BlockDecl and adds them to the Decl tree. Then, in ClangExpressionDeclMap it uses the Decl tree to search for a variable. This fixes lots of variable scoping problems.
Reviewers: sivachandra, chaoren, spyffe, clayborg
Subscribers: tberghammer, jingham, lldb-commits
Differential Revision: http://reviews.llvm.org/D12658
llvm-svn: 247746
"gcc" register numbers are now correctly referred to as "ehframe"
register numbers. In almost all cases, ehframe and dwarf register
numbers are identical (the one exception is i386 darwin where ehframe
regnums were incorrect).
The old "gdb" register numbers, which I incorrectly thought were
stabs register numbers, are now referred to as "Process Plugin"
register numbers. This is the register numbering scheme that the
remote process controller stub (lldb-server, gdbserver, core file
support, kdp server, remote jtag devices, etc) uses to refer to the
registers. The process plugin register numbers may not be contiguous
- there are remote jtag devices that have gaps in their register
numbering schemes.
I removed all of the enums for "gdb" register numbers that we had
in lldb - these were meaningless - and I put LLDB_INVALID_REGNUM
in all of the register tables for the Process Plugin regnum slot.
This change is almost entirely mechnical; the one actual change in
here is to ProcessGDBRemote.cpp's ParseRegisters() which parses the
qXfer:features:read:target.xml response. As it parses register
definitions from the xml, it will assign sequential numbers as the
eRegisterKindLLDB numbers (the lldb register numberings must be
sequential, without any gaps) and if the xml file specifies register
numbers, those will be used as the eRegisterKindProcessPlugin
register numbers (and those may have gaps). A J-Link jtag device's
target.xml does contain a gap in register numbers, and it only
specifies the register numbers for the registers after that gap.
The device supports many different ARM boards and probably selects
different part of its register file as appropriate.
http://reviews.llvm.org/D12791
<rdar://problem/22623262>
llvm-svn: 247741
Before we had:
ClangFunction
ClangUtilityFunction
ClangUserExpression
and code all over in lldb that explicitly made Clang-based expressions. This patch adds an Expression
base class, and three pure virtual implementations for the Expression kinds:
FunctionCaller
UtilityFunction
UserExpression
You can request one of these expression types from the Target using the Get<ExpressionType>ForLanguage.
The Target will then consult all the registered TypeSystem plugins, and if the type system that matches
the language can make an expression of that kind, it will do so and return it.
Because all of the real expression types need to communicate with their ExpressionParser in a uniform way,
I also added a ExpressionTypeSystemHelper class that expressions generically can vend, and a ClangExpressionHelper
that encapsulates the operations that the ClangExpressionParser needs to perform on the ClangExpression types.
Then each of the Clang* expression kinds constructs the appropriate helper to do what it needs.
The patch also fixes a wart in the UtilityFunction that to use it you had to create a parallel FunctionCaller
to actually call the function made by the UtilityFunction. Now the UtilityFunction can be asked to vend a
FunctionCaller that will run its function. This cleaned up a lot of boiler plate code using UtilityFunctions.
Note, in this patch all the expression types explicitly depend on the LLVM JIT and IR, and all the common
JIT running code is in the FunctionCaller etc base classes. At some point we could also abstract that dependency
but I don't see us adding another back end in the near term, so I'll leave that exercise till it is actually necessary.
llvm-svn: 247720
SUMMARY:
This patch provides support for MIPS specific DT_MIPS_RLD_MAP_REL tag in LLDB.
This tag allows debugging of MIPS position independent executables and provides access to shared library information.
Reviewers: clayborg
Subscribers: mohit.bhakkad, sagar, jaydeep, lldb-commits
Differential Revision: http://reviews.llvm.org/D12794
llvm-svn: 247666
Summary:
This was int64_t, but all usages of it came from code that was passing
in unsigned values. The usages of the array size, except for one, were
also treating it as an unsigned value. The usage that treated it as
signed was to try to figure out if it was a complete type or not, but
the callers creating the array didn't seem to be aware of using -1 as
an indicator for an incomplete array.
Reviewers: ribrdb, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12872
llvm-svn: 247662
c:\buildbot\lldb-windows-x86\lldb-windows-x86\llvm\tools\lldb\source\symbol\goastcontext.cpp(906) : warning C4715: 'lldb_private::GoASTContext::GetBitSize' : not all control paths return a value
c:\buildbot\lldb-windows-x86\lldb-windows-x86\llvm\tools\lldb\source\symbol\goastcontext.cpp(1175) : error C4716: 'lldb_private::GoASTContext::ConvertStringToFloatValue' : must return a value
llvm-svn: 247647
Summary:
Linux and FreeBSD occasionally send SI_KERNEL codes, nonexistent on other platforms.
Problem caught on NetBSD.
Reviewers: joerg, sas
Subscribers: sas, lldb-commits, emaste
Differential Revision: http://reviews.llvm.org/D12659
Change by Kamil Rytarowski <n54@gmx.com>
llvm-svn: 247579
The iterator pointing to an element of a dense map was used after
the element from was removed from the map what isn't guaranteed to be
valid at that time.
llvm-svn: 247571
RegisterContextPOSIX.h is poorly named and contains only the declaration
of POSIXBreakpointProtocol, which is used for in-process live kernel
debugging. It is now relevant only to FreeBSD.
In source/Plugins/Process/Utility/RegisterContext*.h (after assorted
rework and refactoring) it only served the purpose of #including other
necessary headers as a side-effect. Remove it from them and just include
the required headers directly.
Differential Revision: http://reviews.llvm.org/D12830
llvm-svn: 247558
Summary:
Realtime signals generally do not represent an error condition in an application but are more
like a regular means of IPC. As such, we shouldn't interrupt an application whenever it recieves
one. If any application will use these signals, it will probably use them a lot, rendering it's
debugging tiresome if we stopped at every signal. Furthermore, these signals are likely to be used
in a low level library, and the programmer may not even be aware of their presence.
For these reasons, I am switching the default disposition of realtime signals on all supported
platforms (i.e. Linux and Freebsd) to no-stop, no-notify. Any user still wishing to receive these
signals can always change the default to suit his needs.
Reviewers: ovyalov, emaste
Subscribers: lldb-commits, emaste
Differential Revision: http://reviews.llvm.org/D12795
llvm-svn: 247537
Summary:
This builds on all platforms, so remove duplication in build
configuration.
Reviewers: labath, clayborg, emaste
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12792
llvm-svn: 247402
Change the mapping symbol handling to handle the case when the mapping
symbols are prefixed with an arbitrary prefix. This isn't strictly standard
compliance, but if all symbols in an object file is prefixed with objcopy
then the prefix will be added to the mapping symbol also. We still want to
treat these symbols as mapping symbols to get the correct address class data.
Differential revision: http://reviews.llvm.org/D12755
llvm-svn: 247400
Summary:
* cmake/LLDBDependencies.cmake: elf-core is already included
globally in LLDB_USED_LIBS, so it doesn't need to be re-added
on individual platforms.
* lib/Makefile: elf-core is linked on each platform, so move it
to the global list of used libraries.
* source/Plugins/Makefile: elf-core is built on each platform, so
move it to the global list of things to build.
Reviewers: clayborg, labath
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12762
llvm-svn: 247366
Summary:
We currently link to this on all platforms, so don't need to re-include
it into the LLDB_USED_LIBS. Also don't need to special case building
it for every supported platform.
Reviewers: clayborg, labath
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12756
llvm-svn: 247284
Patch adds a command to RenderScript plugin allowing users to automatically set breakpoints on every RS kernel.
Command syntax is 'language renderscript kernel breakpoint all <enable/disable>.'
Enable sets breakpoints on all currently loaded kernels, and any kernels which will be loaded in future.
Disable results in breakpoints no longer being set on loaded kernels, but doesn't affect existing breakpoints.
Current command 'language renderscript kernel breakpoint' is changed to 'language renderscript kernel breakpoint set'
Reviewed by: clayborg, jingham
Subscribers: lldb-commits, ADodds, domipheus
Differential Revision: http://reviews.llvm.org/D12728
llvm-svn: 247262
In some special case (e.g. signal handlers, hand written assembly) it is
valid to have 2 stack frame with the same CFA value. This CL change the
looping stack detection code to report a loop only if at least 3
consecutive frames have the same CFA.
Differential revision: http://reviews.llvm.org/D12699
llvm-svn: 247133
* Create new dwo symbol file class
* Add handling for .dwo sections
* Change indexes in SymbolFileDWARF to store compile unit offset next to
DIE offset
* Propagate queries from dwarf compile unit to the dwo compile unit
where applicable
Differential revision: http://reviews.llvm.org/D12291
llvm-svn: 247132
* Remove some unused code
* Remove usage of DWARFDebugInfoEntry::Attributes where usage isn't
reasonable
* Cleanup DWARFMappedHash with separating it to header and implementation
file and fixing the visibility of the functions
Differential revision: http://reviews.llvm.org/D12374
llvm-svn: 247131
Summary:
When lldb is processing a location containing DW_OP_piece, the result is being
stored in the 'pieces' variable. The location is popped from the 'stack' variable.
So this check to see that 'stack' is not empty was invalid and caused the pieces
after the first to not get processed.
I am working on an architecture which has 16-bit and 8-bit registers. So this
problem was quite easy to see. But I was able to re-produce this issue on x86
too with long long variable and compiling woth -m32. It resulted in following
location list.
00000014 08048496 080484b5 (DW_OP_reg6 (esi); DW_OP_piece: 4; DW_OP_reg7 (edi); DW_OP_piece: 4)
and lldb was only showing the contents of first register when I evaluated the
variable as it does not process the 2nd piece due to this check.
Reviewers: clayborg, aprantl
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12674
llvm-svn: 247124
qXfer:features:read:target.xml packet, or via the
plugin.process.gdb-remote.target-definition-file setting, if the
register definition doesn't give us eh_frame or DWARF register
numbers for that register, try to get that information from the ABI
plugin.
The DWARF/eh_frame register numbers are defined in the ABI
standardization documents - so getting this from the ABI plugin is
reasonable. There's little value in having the remote stub inform
us of this generic information, as long as we can all agree on the
names of the registers.
There's some additional information we could get from the ABI. For
instance, on ABIs where function arguments are passed in registers,
lldb defines alternate names like "arg1", "arg2", "arg3" for these
registers so they can be referred to that way by the user. We could
get this from the ABI if the remote stub doesn't provide that. That
may be something worth doing in the future - but for now, I'm keeping
this a little more minimal.
Thinking about this, what we want/need from the remote stub at a
minimum are:
1. The names of the register
2. The number that the stub will use to refer to the register with
the p/P packets and in the ? response packets (T/S) where
expedited register values are provided
3. The size of the register in bytes
(nice to have, to remove any doubt)
4. The offset of the register in the g/G packet if we're going to
use that for reading/writing registers.
debugserver traditionally provides a lot more information in
addition to this via the qRegisterInfo packet, and debugserver
augments its response to the qXfer:features:read:target.xml
query to include this information. Including:
DWARF regnum, eh_frame regnum, stabs regnum, encoding (ieee754,
Uint, Vector, Sint), format (hex, unsigned, pointer, vectorof*,
float), registers that should be marked as invalid if this
register is modified, and registers that contain this register.
We might want to get all of this from the ABI - I'm not convinced
that it makes sense for the remote stub to provide any of these
details, as long as the ABI and remote stub can agree on register
names.
Anyway, start with eh_frame and DWARF coming from the ABI if
they're not provided by the remote stub. We can look at doing
more in the future.
<rdar://problem/22566585>
llvm-svn: 247121
When lldb receives a gdb-remote protocol packet that has
nonprintable characters, it will print the packet in
gdb-remote logging with binary-hex encoding so we don't
dump random 8-bit characters into the packet log.
I'm changing this check to allow whitespace characters
(newlines, linefeeds, tabs) to be printed if those are
the only non-printable characters in the packet.
This is primarily to get the response to the
qXfer:features:read:target.xml packet to show up in the
packet logs in human readable form. Right now we just
get a dozen kilobytes of hex-ascii and it's hard to
figure out what register number scheme is being used.
llvm-svn: 247120
This used to be hardcoded in the FormatManager, but in a pluginized world that is not the right way to go
So, move this step to the Language plugin such that appropriate language plugins for a type get a say about adding candidates to the formatters lookup tables
llvm-svn: 247112
Summary:
The format string was not set up correctly as it was missing the %.
This resulted in a warning (correctly) that the data arguments were
not all used.
Reviewers: clayborg, jingham
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12714
llvm-svn: 247111
As part of our overall switch from hand-rolling RTTI to using LLVM-compatible
methods, I've done the same for ExpressionVariable. The main documentation for
how to do this is in TypeSystem.h, so I've simply referred to that.
llvm-svn: 247085
This will keep our code cleaner and it removes the need for intrusive additions to TypeSystem like:
class TypeSystem
{
virtual ClangASTContext *
AsClangASTContext() = 0;
}
As you can now just use the llvm::dyn_cast and other casts.
llvm-svn: 247041
It is required because of the following edge case on arm:
bx <addr> Non-tail call in a no return function
[data-pool] Marked with $d mapping symbol
The return address of the function call will point to the data pool but
we have to treat it as code so the StackFrame can calculate the symbols
correctly.
Differential revision: http://reviews.llvm.org/D12556
llvm-svn: 246958
Summary:
- For 'register read --all' command on x86_64-Linux Platform:
-- Provide correct values of X87 FPU Special Purpose Registers
-- Both 32-bit & 64-bit inferiors give correct values on this
Platform
- Added a Test Vector:
-- To verify the expected behaviour of the command
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: ashok.thirumurthi, granata.enrico, tfiala, clayborg
Differential Revision: http://reviews.llvm.org/D12592
llvm-svn: 246955
stores information about a variable that different parts of LLDB use, from the
compiler-specific portion that only the expression parser cares about.
http://reviews.llvm.org/D12602
llvm-svn: 246871
The call to ProcessWindowsLog::Initialize() is protected by #if defined(_MSC_VER).
But the call to ProcessWindowsLog::Terminate() was using __WIN32__. This commit
makes it use _MSC_VER too.
Committing as it seems obvious change.
llvm-svn: 246859
* Change Module::MatchesModuleSpec to return true in case the file spec
in the specified module spec matches with the platform file spec, but
not with the local file spec
* Change the module_resolver used when resolving a remote shared module
to always set the platform file spec to the file spec requested
Differential revision: http://reviews.llvm.org/D12601
llvm-svn: 246852
Summary:
GetOptInc provides getopt(), getopt_long() and getopt_long_only().
Windows (for defined(_MSC_VER)) doesn't ship with all of the getopt(3) family members and needs all of them. NetBSD requires only getopt_long_only(3).
While there fix the code for clang diagnostics.
Author: Kamil Rytarowski
Reviewers: joerg
Subscribers: labath, zturner, lldb-commits
Differential Revision: http://reviews.llvm.org/D12582
llvm-svn: 246843
Currently the RS breakpoint command can only find a kernel if it's in an already loaded RS module.
This patch allows users to set pending breakpoints on RenderScript kernels which will be loaded in the future.
Implemented by creating a RS breakpoint resolver, to limit search scope to only RS modules.
Reviewed by: clayborg, jingham
Subscribers: lldb-commits, ADodds, domipheus
Differential Revision: http://reviews.llvm.org/D12360
llvm-svn: 246842
Summary:
- Capability to force return user specified values
from inside of a function on lldb command terminal
- Support for Integral, Pointer and Floating Point values
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: jingham, clayborg
Subscribers: tberghammer
Differential Revision: http://reviews.llvm.org/D12595
llvm-svn: 246841
ehframe_ & from gdb_ to stabs_ for clarity.
Also document the fact that i386 eh_frame on Darwin has the register
numbers swapped for ebp/esp from the DWARF register numbers so no one
copies these defines for other i386 ABI plugins. This bug only ever
existed on Darwin.
No code changes, just renaming variables.
llvm-svn: 246834
* Use the frame's context (instead of just the target's) when evaluating,
so that the language of the frame's CU can be used to select the
compiler and/or compiler options to use when parsing the expression.
This allows for modules built with mixed languages to be parsed in
the context of their frame.
* Add all C and C++ language variants when determining the language options
to set.
* Enable C++ language options when language is C or ObjC as a workaround since
the expression parser uses features of C++ to capture values.
* Enable ObjC language options when language is C++ as a workaround for ObjC
requirements.
* Disable C++11 language options when language is C++03.
* Add test TestMixedLanguages.py to check that the language being used
for evaluation is that of the frame.
* Fix test TestExprOptions.py to check for C++11 instead of C++ since C++ has
to be enabled for C, and remove redundant expr --language test for ObjC.
* Fix TestPersistentPtrUpdate.py to not require C++11 in C.
Reviewed by: clayborg, spyffe, jingham
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11102
llvm-svn: 246829
Summary:
This also moves the xcode support files to be near or the same
as the ones used for cmake.
The source/API/liblldb.xcodes.exports differs from the
source/API/liblldb.exports in that one contains the actual
symbol names (_ prefixed) while the other contains the symbol
names as they are in the code. The liblldb.exports file is
preprocessed by the cmake scripts into the correct per-platform
file needed (like a linker script on Linux).
This is not enabled on Windows as Windows doesn't use the same
name mangling and so it won't be valid there. Also, this is handled
already in a different way on Windows (via dll exports).
Reviewers: emaste, clayborg, labath, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12599
llvm-svn: 246822
Summary:
The AppleGetQueuesHandler code no longer needs to include a header
from the AppleObjCRuntime, so we can remove workarounds that were
present in the build systems.
Reviewers: clayborg, jasonmolenda
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12589
llvm-svn: 246821
Summary:
There was a race condition in the AsyncThread, where we would end up sending a vAttach
notification to the thread before it got a chance set up its listener (this can be reproduced by
adding a sleep() at the very beginning of ProcessGDBRemote::AsyncThread()). This event would then
get lost and we LLDB would deadlock. I fix this by setting up the listener early on, in the
ProcessGDBRemote constructor.
This should improve the stability of all attach tests. For now, I am removing XTIMEOUT from
TestAttachResume, and will watch the buildbots for signs of trouble.
Reviewers: clayborg, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12552
llvm-svn: 246756
Summary:
There was a race condition in Process class, where we would not wait for process stdout to
propagate fully before we would shut down the connection (repro case: slow down the stdio thread
by placing a sleep right at the end of the while loop in Communication::ReadThread). The Process
class already tried to solve this problem by synchronizing with the read thread in
Process::ShouldBroadcastEvent, but unfortunately the connection got closed before that in
Process::SetExitStatus. I solve this issue by delaying the connection shutdown until we get a
chance to process the event and synchronize. Alternatively, I could have moved the
synchronization point to an earlier point in SetExitStatus, but it seems safer to delay the
shutdown until other things get a chance to notice the process has exited.
Reviewers: clayborg, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12558
llvm-svn: 246753
Summary:
This doesn't exist in other LLVM projects any longer and doesn't
do anything.
Reviewers: chaoren, labath
Subscribers: emaste, tberghammer, lldb-commits, danalbert
Differential Revision: http://reviews.llvm.org/D12586
llvm-svn: 246749
almost all the elements on the list can't actually be passed to the language
command and all the ones that can have already been listed in the subcommands
list.
<rdar://problem/22551082>
llvm-svn: 246740
This is still something I need to fix, but at least it's not so ugly, and it's
consistent with the other code that does that so we will catch it when we purge
all such code.
llvm-svn: 246738
Clang-specific part, create the ExpressionVariable source/header file and
move ClangExpressionVariable into the Clang expression parser plugin.
It is expected that there are some ugly #include paths... these will be resolved
by either (1) making that code use generic expression variables (once they're
separated appropriately) or (2) moving that code into a plug-in, often
the expression parser plug-in.
llvm-svn: 246737
Some tests were failing because the test would try to delete the
file before inferior had exited, but on Windows this will fail by
default unless you specify FILE_SHARE_DELETE when opening the file.
Can't think of a good reason not to do this, so here it is.
llvm-svn: 246682
This fixes a regression caused by r245645 where creating alternative
thumb disassembler was enabled even when the main disassembler is
already thumb.
llvm-svn: 246649
If no architecture is defined for the disassambler command then it uses
the architecture of the target. In case of arm it will be "arm" what is
treated as the oldest arm version by the LLVM disassambler causing a lot
of invalid opcode in the output.
This change forces the use of "armv8.1a" (the newest arm architecture) if
no sub architecure was specified (either by the user or by the target) to
disassamble all instruction.
Differential revision: http://reviews.llvm.org/D12553
llvm-svn: 246648
If a command argument contains a space then it have to be escaped with
backslash signs so the argument parsing logic can parse it properly.
This CL fixes the tab completion code for the arguments to create
complitions with correctly escaped strings.
Differential revision: http://reviews.llvm.org/D12531
llvm-svn: 246639
These are useful helpers over the low-level API of the FormattersContainer, and since we're actually going to start moving formatters into plugins, it makes sense to simplify things
llvm-svn: 246612
Summary:
When calling find_first_of and find_last_of on a single character,
we can instead just call find / rfind and make our intent more
clear.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12518
llvm-svn: 246609
Summary:
This was removed from the other ABI plugins long ago. This removes
a warning that was happening in this unused code as a result of
adding 2 new types to Scalar.h (e_uint128 and e_sint128).
Reviewers: clayborg
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12514
llvm-svn: 246608
Sean Callanan