Summary:
LSV replaces multiple adjacent loads with one vectorized load and a
bunch of extractelement instructions. This patch makes the
extractelement instructions' names match those of the original loads,
for (hopefully) improved readability.
Reviewers: asbirlea, tstellarAMD
Subscribers: arsenm, mzolotukhin
Differential Revision: https://reviews.llvm.org/D23748
llvm-svn: 280818
If the virtual method comes from a secondary vtable, then the type of
the 'this' parameter should be i8*, and not a pointer to the complete
class. In the MS ABI, the 'this' parameter on entry points to the vptr
containing the virtual method that was called, so we use i8* instead of
the normal type. We had a mismatch where the CGFunctionInfo of the call
didn't match the CGFunctionInfo of the declaration, and this resulted in
some assertions, but now both sides agree the type of 'this' is i8*.
Fixes one issue raised in PR30293
llvm-svn: 280815
Disable some Visual C++ warnings on ISL. These are not reported by GCC/Clang in
the ISL build system. We do not intend to fix them in the Polly in-tree copy,
hence disable these warnings.
llvm-svn: 280811
Summary:
This saves a library call to __aeabi_uidivmod. However, the
processor must feature hardware division in order to benefit from
the transformation.
Reviewers: scott-0, jmolloy, compnerd, rengolin
Subscribers: t.p.northover, compnerd, aemerson, rengolin, samparker, llvm-commits
Differential Revision: https://reviews.llvm.org/D24133
llvm-svn: 280808
This fixes a similar issue to the one already fixed by r280804
(revieved in D24256). Revision 280804 fixed the problem with unsafe dyn_casts
in the extrq/extrqi combining logic. However, it turns out that even the
insertq/insertqi logic was affected by the same problem.
llvm-svn: 280807
This patch fixes an assertion failure caused by unsafe dynamic casts on the
constant operands of sse4a intrinsic calls to extrq/extrqi
The combine logic that simplifies sse4a extrq/extrqi intrinsic calls currently
checks if the input operands are constants. Internally, that logic relies on
dyn_casts of values returned by calls to method Constant::getAggregateElement.
However, method getAggregateElemet may return nullptr if the constant element
cannot be retrieved. So, all the dyn_casts can potentially fail. This is what
happens for example if a constexpr value is passed in input to an extrq/extrqi
intrinsic call.
This patch fixes the problem by using a dyn_cast_or_null (instead of a simple
dyn_cast) on the result of each call to Constant::getAggregateElement.
Added reproducible test cases to x86-sse4a.ll.
Differential Revision: https://reviews.llvm.org/D24256
llvm-svn: 280804
This reverts commit r280796, as it broke the AArch64 bots for no reason.
The tests were passing and we should try to keep them passing, so a proper
review should make that happen.
llvm-svn: 280802
Previously we combined sections by name if linkerscript was used.
For that we had to disable SHF_MERGE handling temporarily, but then
found that implementing it properly will require additional complexity layers like
subsections or something.
At the same time looks we can live with multiple output sections approach for now.
That patch do this change.
Differential revision: https://reviews.llvm.org/D24127
llvm-svn: 280801
GNU ld supports [chars] wildcards in version scripts, to match a single instance of any of the chars.
Here is an extern example from libstdc++'s version script in FreeBSD:
extern "C++"
{
...
std::locale::_[T-Za-z]*;
std::[A-Zm]*;
std::n[^u]*;
std::nu[^m]*;
std::num[^e]*;
...
}
Patch adds support for scripts above. This is PR29093.
Differential revision: https://reviews.llvm.org/D23803
llvm-svn: 280799
Summary:
The o32 ABI doesn't not support the TImode helpers. For the time being,
disable just the shift libcalls as they break recursive builds on MIPS.
Reviewers: sdardis
Subscribers: llvm-commits, sdardis
Differential Revision: https://reviews.llvm.org/D24259
llvm-svn: 280798
Previously testcases were enabled only for shell.
r280733 added c++ itanium demangler to lld and we can enable them fully.
Also this change make quotes to be escaped:
extern "C++" -> extern \"C++\", which worked before just because we are dropping tokens
quotes internally at this moment.
llvm-svn: 280797
With this patch 10 out of 13 tests are passing.
Following is the list of failing tests:
struct-simple.cpp
workingset-signal-posix.cpp
mmap-shadow-conflict.c
Reviewed by bruening
Differential: D23799
llvm-svn: 280795
In failure cases it's not guaranteed that the PHI we're inspecting is actually in the successor block! In this case we need to bail out early, and never query getIncomingValueForBlock() as that will cause an assert.
llvm-svn: 280794
After the reformat, the unittests do not compile due to missing due to redefinition errors
between PosixApi.h and ucrt/direct.h. This is a bit of a shot in the dark, as I have not tested
it on windows, but I am restoring the original include order, so it should hopefully fix it.
llvm-svn: 280793
I should have realised this the first time around, but if we're avoiding sinking stores where the operands come from allocas so they don't create selects, we also have to do the same for loads because SROA will be just as defective looking at loads of selected addresses as stores.
Fixes PR30188 (again).
llvm-svn: 280792
In the top-level CMakeLists.txt, we set CMAKE_BUILD_WITH_INSTALL_RPATH to ON,
and then for the unit tests we set it to <test>/../../lib. This works for tests
that live in unittest/<whatever>, but not for those that live in subdirectories
e.g. unittest/Transforms/IPO or unittest/ExecutionEngine/Orc. When building
with BUILD_SHARED_LIBRARIES, such tests don't manage to find their libraries.
Since the tests are run from the build directory, it makes sense to set their
RPATH for the build tree, rather than the install tree. This is the default in
CMake since 2.6, so all we have to do is set CMAKE_BUILD_WITH_INSTALL_RPATH to
OFF for the unit tests.
llvm-svn: 280791
PR30292 showed a case where our PHI checking wasn't correct. We were checking that all values were used by the same PHI before deciding to sink, but we weren't checking that the incoming values for that PHI were what we expected. As a result, we had to bail out after block splitting which caused us to never reach a steady state in SimplifyCFG.
Fixes PR30292.
llvm-svn: 280790
When folding an addi into a memory access that can take an immediate offset, we
were implicitly assuming that the existing offset was zero. This was incorrect.
If we're dealing with an addi with a plain constant, we can add it to the
existing offset (assuming that doesn't overflow the immediate, etc.), but if we
have anything else (i.e. something that will become a relocation expression),
we'll go back to requiring the existing immediate offset to be zero (because we
don't know what the requirements on that relocation expression might be - e.g.
maybe it is paired with some addis in some relevant way).
On the other hand, when dealing with a plain addi with a regular constant
immediate, the alignment restrictions (from the TOC base pointer, etc.) are
irrelevant.
I've added the test case from PR30280, which demonstrated the bug, but also
demonstrates a missed optimization opportunity (i.e. we don't need the memory
accesses at all).
Fixes PR30280.
llvm-svn: 280789
OpenCL requires __ENDIAN_LITTLE__ be set for little endian targets.
The default for targets was also apparently big endian, so AMDGPU
was incorrectly reported as big endian. Set this from the triple
so targets don't have another place to set the endianness.
llvm-svn: 280787
The previous commit (r280368 - https://reviews.llvm.org/D23313) does not cover AVX-512F, KNL set.
FNEG(x) operation is lowered to (bitcast (vpxor (bitcast x), (bitcast constfp(0x80000000))).
It happens because FP XOR is not supported for 512-bit data types on KNL and we use integer XOR instead.
I added pattern match for integer XOR.
Differential Revision: https://reviews.llvm.org/D24221
llvm-svn: 280785
copy-initialization. We previously got this wrong in a couple of ways:
- we only looked for copy / move constructors and constructor templates for
this copy, and thus would fail to copy in cases where doing so should use
some other constructor (but see core issue 670),
- we mishandled the special case for disabling user-defined conversions that
blocks infinite recursion through repeated application of a copy constructor
(applying it in slightly too many cases) -- though as far as I can tell,
this does not ever actually affect the result of overload resolution, and
- we misapplied the special-case rules for constructors taking a parameter
whose type is a (reference to) the same class type by incorrectly assuming
that only happens for copy/move constructors (it also happens for
constructors instantiated from templates and those inherited from base
classes).
These changes should only affect strange corner cases (for instance, where the
copy constructor exists but has a non-const-qualified parameter type), so for
the most part it only causes us to produce more 'candidate' notes, but see the
test changes for other cases whose behavior is affected.
llvm-svn: 280776
This patch fixes PR30260 by using a (void*) cast on the placement argument
to placement new to casts away the const. See also http://llvm.org/PR30260.
As a drive by change this patch also changes the header guard for
<experimental/optional> to _LIBCPP_EXPERIMENTAL_OPTIONAL from _LIBCPP_OPTIONAL.
llvm-svn: 280775
When libc++experimental was originally created it was empty and therefore there
was no reason to install it. Now that the library contains
<experimental/memory_resource> and <experimental/filesystem> there is a good
reason to install it.
Specifically this patch enables the installation whenever LIBCXX_INSTALL_LIBRARY
is true and LIBCPP_ENABLE_EXPERIMENTAL_LIBRARY is true.
llvm-svn: 280773
Rafael Espindola