Summary:
If a command from a sourced file produces asynchronous output, this
output often does not make its way to the user. This happens because the
asynchronous output machinery relies on the iohandler stack to ensure
the output does not interfere with the things the iohandler is doing.
However, if this happens near the end of the command stream then by the
time the asynchronous output is produced we may already have already
started tearing down the sourcing session. Specifically, we may already
pop the relevant iohandler, leaving the stack empty.
This patch makes sure this kind of output gets printed by adding a
fallback to IOHandlerStack::PrintAsync to print the output directly if
the stack is empty. This is safe because if we have no iohandlers then
there is nothing to synchronize.
Reviewers: JDevlieghere, clayborg
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75454
Summary:
This packet is necessary to make lldb work with the remote-gdb stub in
user mode qemu when running position-independent binaries. It reports
the relative position (load bias) of the loaded executable wrt. the
addresses in the file itself.
Lldb needs to know this information in order to correctly set the load
address of the executable. Normally, lldb would be able to find this out
on its own by following the breadcrumbs in the process auxiliary vector,
but we can't do this here because qemu does not support the
qXfer:auxv:read packet.
This patch does not implement full scope of the qOffsets packet (it only
supports packets with identical code, data and bss offsets), because it
is not fully clear how should the different offsets be handled and I am
not aware of a producer which would make use of this feature (qemu will
always
<https://github.com/qemu/qemu/blob/master/linux-user/elfload.c#L2436>
return the same value for code and data offsets). In fact, even gdb
ignores the offset for the bss sections, and uses the "data" offset
instead. So, until the we need more of this packet, I think it's best
to stick to the simplest solution possible. This patch simply rejects
replies with non-uniform offsets.
Reviewers: clayborg, jasonmolenda
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74598
The debugserver profile thread used to suspend itself between samples with
a usleep. When you detach or kill, MachProcess::Clear would delay replying
to the incoming packet until pthread_join of the profile thread returned.
If you are unlucky or the suspend delay is long, it could take longer than
the packet timeout for pthread_join to return. Then you would get an error
about detach not succeeding from lldb - even though in fact the detach was
successful...
I replaced the usleep with PThreadEvents entity. Then we just call a timed
WaitForEventBits, and when debugserver wants to stop the profile thread, it
can set the event bit, and the sleep will exit immediately.
Differential Revision: https://reviews.llvm.org/D75004
These can come out nondeterministically for two reasons:
- sorting based on ConstStringified pointer values
- different relative speeds of the indexing threads
Making these nondeterministic without incurring performance penalties is
hard, so I just make the test expect them in any order (the order is not
important in this test anyway.
Summary:
I added an `abort()` call to some code and noticed that the test suite was still passing and it just marked my test as "UNSUPPORTED".
It seems the reason for that is that we expect failing tests to print "FAIL:" which doesn't happen when we crash. If we then also
have an unsupported because we skipped some debug information in the output, we just mark the test passing because it is unsupported
on the current platform.
This patch marks any test that has a non-zero exit code as failing even if it doesn't print "FAIL:" (e.g., because it crashed).
Reviewers: labath, JDevlieghere
Reviewed By: labath, JDevlieghere
Subscribers: aprantl, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D75031
These are technically text files, but the object file layer treats them
as binary, and the relevant tests verify the parsed contents byte for
byte. Git's crlf conversion can make those tests fail. Marking the files
as non-text disables that.
Highlight the color marker similar to what we do for the column marker.
The default color matches the color of the current PC marker (->) in the
default disassembly format.
Differential revision: https://reviews.llvm.org/D75070
This patch moves the SB API method GetExtendedCrashInformation from
SBTarget to SBProcess since it only makes sense to call this method on a
sane process which might not be the case on a SBTarget object.
It also addresses some feedbacks received after landing the first patch
for the 'crash-info' feature.
Differential Revision: https://reviews.llvm.org/D75049
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
The convention is that the dwp file name is derived from the name of the
file holding the executable code, even if the linked portion of the
debug info is elsewhere (objcopy --only-keep-debug).
Summary:
Currently the test suite runs with enabled automatically applied Clang fix-its for expressions.
This is causing that sometimes incorrect expressions in tests are still evaluated even though they
are actually incorrect. Let's disable this feature in the test suite so that we know when expressions
are wrong and leave the fix-it testing to the dedicated tests for that feature.
Also updates the `lang/cpp/operators/` test as it seems Clang needs the `struct` keywords
before C and would otherwise fail without fixits.
Reviewers: jingham, JDevlieghere, shafik
Reviewed By: JDevlieghere, shafik
Subscribers: shafik, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74957
Explicit dynsym/dynstr sections were added in a6370d5 to compensate for
a yaml2obj change D74764. This test doesn't need those sections, so
instead I just delete the explicit section blocks, and also the
"DynamicSymbols" block, which triggers their implicit generation.
Summary:
When we added support for type units in dwo files, we changed the
"manual" dwarf index to index _all_ dwarf units in the dwo file instead
of just the split unit belonging to our skeleton unit. This was fine for
dwo files, as they contain only a single compile units and type units do
not have a split type unit which would point to them.
However, this does not work for dwp files because, these files do
contain multiple split compile units, and the current approach means
that each unit gets indexed multiple times (once for each split unit =>
n^2 complexity).
This patch teaches the manual dwarf index to treat dwp files specially.
Any type units in the dwp file added to the main list of compile units
and indexed with them in a single batch. Split compile units in dwp
files are still indexed as a part of their skeleton unit -- this is done
because we need the DW_AT_language attribute from the skeleton unit to
index them properly.
Handling of dwo files remains unchanged -- all units (type and skeleton)
are indexed when we reach the dwo file through the split unit.
Reviewers: clayborg, JDevlieghere, aprantl
Subscribers: arphaman, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74964
D74764 (https://reviews.llvm.org/rG31f2ad9c368d47721508cbd0d120d626f9041715)
changed the behavior of the yaml2obj. Now it assigns virtual addresses
for allocatable sections.
SymbolFile/Breakpad/symtab.test started to fail after this change:
(http://lab.llvm.org:8011/builders/lldb-x86_64-debian/builds/5520/steps/test/logs/stdio)
Command Output (stderr):
--
/home/worker/lldb-x86_64-debian/lldb-x86_64-debian/llvm-project/lldb/test/Shell/SymbolFile/Breakpad/symtab.test:6:10: error: CHECK: expected string not found in input
# CHECK: Symtab, file = {{.*}}symtab.out, num_symbols = 5:
^
<stdin>:15:1: note: scanning from here
Symtab, file = /home/worker/lldb-x86_64-debian/lldb-x86_64-debian/build/tools/lldb/test/SymbolFile/Breakpad/Output/symtab.out, num_symbols = 6:
^
<stdin>:15:99: note: possible intended match here
Symtab, file = /home/worker/lldb-x86_64-debian/lldb-x86_64-debian/build/tools/lldb/test/SymbolFile/Breakpad/Output/symtab.out, num_symbols = 6:
For now I've updated the basic-elf.yaml so that now it produce the same layout as before D74764.
Breakpad/symtab.test should be updated it seems.
On Apple platforms, is __arm__ isn't defined and we're not on Intel, we use an
alternate std::string layout. I.e., the libcxx string test fails on phones
because the hand-crafted "garbage" string structs are actually valid strings.
See:
```
// _LIBCPP_ALTERNATE_STRING_LAYOUT is an old name for
// _LIBCPP_ABI_ALTERNATE_STRING_LAYOUT left here for backward compatibility.
#if (defined(__APPLE__) && !defined(__i386__) && !defined(__x86_64__) && \
(!defined(__arm__) || __ARM_ARCH_7K__ >= 2)) || \
defined(_LIBCPP_ALTERNATE_STRING_LAYOUT)
#define _LIBCPP_ABI_ALTERNATE_STRING_LAYOUT
#endif
```
Disable inspection of the garbage structs on Apple+ARM devices.
Currently, in macOS, when a process crashes, lldb halts inside the
implementation disassembly without yielding any useful information.
The only way to get more information is to detach from the process, then wait
for ReportCrash to generate a report, find the report, then see what error
message was included in it. Instead of waiting for this to happen, lldb could
locate the error_string and make it available to the user.
This patch addresses this issue by enabling the user to fetch extended
crash information for crashed processes using `process status --verbose`.
Depending on the platform, this will try to gather different crash information
into an structured data dictionnary. This dictionnary is generic and extensible,
as it contains an array for each different type of crash information.
On Darwin Platforms, lldb will iterate over each of the target's images,
extract their `__crash_info` section and generated a StructuredData::Array
containing, in each entry, the module spec, its UUID, the crash messages
and the abort cause. The array will be inserted into the platform's
`m_extended_crash_info` dictionnary and `FetchExtendedCrashInformation` will
return its JSON representation like this:
```
{
"crash-info annotations": [
{
"abort-cause": 0,
"image": "/usr/lib/system/libsystem_malloc.dylib",
"message": "main(76483,0x1000cedc0) malloc: *** error for object 0x1003040a0: pointer being freed was not allocated",
"message2": "",
"uuid": "5747D0C9-900D-3306-8D70-1E2EA4B7E821"
},
...
],
...
}
```
This crash information can also be fetched using the SB API or lldb-rpc protocol
using SBTarget::GetExtendedCrashInformation().
rdar://37736535
Differential Revision: https://reviews.llvm.org/D74657
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Since the `platform process` commamnd has more tests now, this commits
separates each of the `platform process` subcommand's test in its own directory.
Differential Revision: https://reviews.llvm.org/D74836
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This change will bring lldb-vscode in line with how several other llvm
tools process command line arguments and make it easier to add future
options.
Differential revision: https://reviews.llvm.org/D74798
Summary:
Around a third of our test sources have LLVM license headers. This patch removes those headers from all test
sources and also fixes any tests that depended on the length of the license header.
The reasons for this are:
* A few tests verify line numbers and will start failing if the number of lines in the LLVM license header changes. Once I landed my patch for valid SourceLocations in debug info we will probably have even more tests that verify line numbers.
* No other LLVM project is putting license headers in its test files to my knowledge.
* They make the test sources much more verbose than they have to be. Several tests have longer license headers than the actual test source.
For the record, the following tests had their line numbers changed to pass with the removal of the license header:
lldb-api :: functionalities/breakpoint/breakpoint_by_line_and_column/TestBreakpointByLineAndColumn.py
lldb-shell :: Reproducer/TestGDBRemoteRepro.test
lldb-shell :: Reproducer/TestMultipleTargets.test
lldb-shell :: Reproducer/TestReuseDirectory.test
lldb-shell :: ExecControl/StopHook/stop-hook-threads.test
lldb-shell :: ExecControl/StopHook/stop-hook.test
lldb-api :: lang/objc/exceptions/TestObjCExceptions.py
Reviewers: #lldb, espindola, JDevlieghere
Reviewed By: #lldb, JDevlieghere
Subscribers: emaste, aprantl, arphaman, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74839
TestCPPAuto was only failing on windows due to the std::string
copying (which was not related at all to 'auto' functionality).
TestStepTarget is now also passing but that seems more that we
now have by accident the right behavior in Windows. I'll remove
the x-fail just to make the bot green again.
The only thing needed was to account for the offset from the
debug_cu_index section when searching for the location list.
This patch also fixes a bug in the Module::ParseAllDebugSymbols
function, which meant that we would only parse the variables of the
first compile unit in the module. This function is only used from
lldb-test, so this does not fix any real issue, besides preventing me
from writing a test for this patch.
This should use -> instead of '.', but the fix-it functionality of
the expression evaluator saved us here. Let's use the proper syntax
in the first place as we don't want to test fix-its here.
Summary:
Currently when printing data types we include implicit scopes such as inline namespaces or anonymous namespaces.
This leads to command output like this (for `std::set<X>` with X being in an anonymous namespace):
```
(lldb) print my_set
(std::__1::set<(anonymous namespace)::X, std::__1::less<(anonymous namespace)::X>, std::__1::allocator<(anonymous namespace)::X> >) $0 = size=0 {}
```
This patch removes all the implicit scopes when printing type names in TypeSystemClang::GetDisplayTypeName
so that our output now looks like this:
```
(lldb) print my_set
(std::set<X, std::less<X>, std::allocator<X> >) $0 = size=0 {}
```
As previously GetDisplayTypeName and GetTypeName had the same output we actually often used the
two as if they are the same method (they were in fact using the same implementation), so this patch also
fixes the places where we actually want the display type name and not the actual type name.
Note that this doesn't touch the `GetTypeName` class that for example the data formatters use, so this patch
is only changes the way we display types to the user. The full type name can also still be found when passing
'-R' to see the raw output of a variable in case someone is somehow interested in that.
Partly fixes rdar://problem/59292534
Reviewers: shafik, jingham
Reviewed By: shafik
Subscribers: christof, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74478
All calls to operator new in this test fail for me with:
```
expression --show-types -- *(new foo(47))`
Error output:
error: Execution was interrupted, reason: internal c++ exception breakpoint(-6)..
The process has been returned to the state before expression evaluation.
```
As calling operator new isn't the idea of this test, this patch moves that
logic to the binary with some new_* utility functions and explicitly tests
this logic in the constructor test (where we can isolate the failures and
skip them on Linux).
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
Summary:
Currently the data formatter is treating `std::atomic` variables as transparent wrappers
around their underlying value type. This causes that when printing `std::atomic<A *>`, the data
formatter will forward all requests for the children of the atomic variable to the `A *` pointer type
which will then return the respective members of `A`. If `A` in turn has a member that contains
the original atomic variable, this causes LLDB to infinitely recurse when printing an object with
such a `std::atomic` pointer member.
We could implement a workaround similar to whatever we do for pointer values but this patch
just implements the `std::atomic` formatter in the same way as we already implement other
formatters (e.g. smart pointers or `std::optional`) that just model the contents of the as a child
"Value". This way LLDB knows when it actually prints a pointer and can just use its normal
workaround if "Value" is a recursive pointer.
Fixes rdar://59189235
Reviewers: JDevlieghere, jingham, shafik
Reviewed By: shafik
Subscribers: shafik, christof, jfb, abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74310
Pavel Labath