This avoids the confusing 'CS.paramHasAttr(ArgNo + 1, Foo)' pattern.
Previously we were testing return value attributes with index 0, so I
introduced hasReturnAttr() for that use case.
llvm-svn: 300367
A fix for the bug reported in PR30911.
The issue arises when multiple CALLSEQ_BEGIN nodes are unscheduled as
the last node to be unscheduled will gain access to the CallResource
register. But when a node is being picked, only CALLSEQ_END nodes are
checked against the CallResource and have their chains evaluated.
This then means that other CALLSEQ_BEGIN nodes can be scheduled
before the existing call sequence has been finalised. This patch adds
a check against the FrameSetup nodes in DelayForLiveRegs to prevent
this from happening.
Differential Revision: https://reviews.llvm.org/D31536
llvm-svn: 299926
Summary:
For SETCC we aren't calculating the KnownZero bits at all. I've copied the code from computeKnownZero over for this.
For AssertZExt we were only setting KnownZero for bits that were demanded. But the upper bits are zero whether they were demanded or not.
I'm interested in fixing this because my belief is the first part of the ISD::AND handling code in SimplifyDemandedBits largely exists because of these two bugs. In that code we go to computeKnownBits for the LHS and optimize a RHS constant. Because computeKnownBits handles SETCC and AssertZExt correctly we get better information sometimes than when we call SimplifyDemandedBits on the LHS later. With these two issues fixed in SimplifyDemandedBits I was able to remove that computeKnownBits call and still pass all X86 tests. I'll submit that change in a separate patch.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31715
llvm-svn: 299839
This reverts commit r299766. This change appears to have broken the MIPS
buildbots. Reverting while I investigate.
Revert "[mips] Remove usage of debug only variable (NFC)"
This reverts commit r299769. Follow up commit.
llvm-svn: 299788
By target hookifying getRegisterType, getNumRegisters, getVectorBreakdown,
backends can request that LLVM to scalarize vector types for calls
and returns.
The MIPS vector ABI requires that vector arguments and returns are passed in
integer registers. With SelectionDAG's new hooks, the MIPS backend can now
handle LLVM-IR with vector types in calls and returns. E.g.
'call @foo(<4 x i32> %4)'.
Previously these cases would be scalarized for the MIPS O32/N32/N64 ABI for
calls and returns if vector types were not legal. If vector types were legal,
a single 128bit vector argument would be assigned to a single 32 bit / 64 bit
integer register.
By teaching the MIPS backend to inspect the original types, it can now
implement the MIPS vector ABI which requires a particular method of
scalarizing vectors.
Previously, the MIPS backend relied on clang to scalarize types such as "call
@foo(<4 x float> %a) into "call @foo(i32 inreg %1, i32 inreg %2, i32 inreg %3,
i32 inreg %4)".
This patch enables the MIPS backend to take either form for vector types.
Reviewers: zoran.jovanovic, jaydeep, vkalintiris, slthakur
Differential Revision: https://reviews.llvm.org/D27845
llvm-svn: 299766
Since the BUILD_VECTOR has already been checked by
isBuildVectorOfConstantSDNodes() in SelectionDAG::getNode() for a
SIGN_EXTEND_INREG, it can be assumed that Op is always either undef or a
ConstantSDNode, and Ops.size() will always equal VT.getVectorNumElements().
llvm-svn: 299647
This is a follow-on to r299096 which added support for fmadd.
Subtract does not have the case where with two multiply operands we commute in
order to fuse with the multiply with the fewer uses.
llvm-svn: 299572
This is a generic combine enabled via target hook to reduce icmp logic as discussed in:
https://bugs.llvm.org/show_bug.cgi?id=32401
It's likely that other targets will want to enable this hook for scalar transforms,
and there are probably other patterns that can use bitwise logic to reduce comparisons.
Note that we are missing an IR canonicalization for these patterns, and we will probably
prefer the pair-of-compares form in IR (shorter, more likely to fold).
Differential Revision: https://reviews.llvm.org/D31483
llvm-svn: 299542
When DAGCombiner visits a SIGN_EXTEND_INREG of a BUILD_VECTOR with
constant operands, a new BUILD_VECTOR node will be created transformed
constants.
Llvm-stress found a case where the new BUILD_VECTOR had constant operands
of an illegal type, because the (legal) element type is in fact not a legal
scalar type.
This patch changes this so that the new BUILD_VECTOR has the same operand
type as the old one.
Review: Eli Friedman, Nirav Dave
https://bugs.llvm.org//show_bug.cgi?id=32422
llvm-svn: 299540
This reverts commit r299047 which is incorrect because the
simplification may result in incorrect propogation of undefs to users of
the folded shuffle.
Thanks to Andrea Di Biagio for pointing this out.
llvm-svn: 299368
This moves the isMask and isShiftedMask functions to be class methods. They now use the MathExtras.h function for single word size and leading/trailing zeros/ones or countPopulation for the multiword size. The previous implementation made multiple temorary memory allocations to do the bitwise arithmetic operations to match the MathExtras.h implementation.
Differential Revision: https://reviews.llvm.org/D31565
llvm-svn: 299362
The code already allowed vector types in via "isInteger" (which might want
a more specific name), so use splat-friendly constant predicates to match
those types.
llvm-svn: 299304
This can only happen when we have a mix of zero and undef elements and the two vectors have a different arrangement of zeros/undefs. The shuffle should eventually be constant folded to all zeros.
Fixes PR32484.
llvm-svn: 299291
(and (setlt X, 0), (setlt Y, 0)) --> (setlt (and X, Y), 0)
We have 7 similar folds, but this one got away. The fact that the
x86 test with a branch didn't change is probably a separate bug. We
may also be missing this and the related folds in instcombine.
llvm-svn: 299252
Currently ComputeNumSignBits returns the minimum number of sign bits for all elements of vector data, when we may only be interested in one/some of the elements.
This patch adds a DemandedElts argument that allows us to specify the elements we actually care about. The original ComputeNumSignBits implementation calls with a DemandedElts demanding all elements to match current behaviour. Scalar types set this to 1.
I've only added support for BUILD_VECTOR and EXTRACT_VECTOR_ELT so far, all others will default to demanding all elements but can be updated in due course.
Followup to D25691.
Differential Revision: https://reviews.llvm.org/D31311
llvm-svn: 299219
Follow up to D25691, this sets up the plumbing necessary to support vector demanded elements support in known bits calculations in target nodes.
Differential Revision: https://reviews.llvm.org/D31249
llvm-svn: 299201
Now alternatively to the TargetOption.AllowFPOpFusion global flag, FMUL->FADD
can also use the per operation FMF to allow fusion.
The idea here is not to port everything to the new scheme (e.g. fused
multiply-and-sub will be ported later) but that this work all the way from
clang.
The transformation is conditionalized on *both* the FADD and the FMUL having
the FMF contract flag.
Differential Revision: https://reviews.llvm.org/D31169
llvm-svn: 299096
In the long-term, we want to replace statistics with something
finer-grained that lets us gather per-function data.
Remarks are that replacement.
Create an ORE instance in SelectionDAGISel, and pass it to
SelectionDAG.
SelectionDAG was used so that we can emit remarks from all
SelectionDAG-related code, including TargetLowering and DAGCombiner.
This isn't used in the current patch but Adam tells me he's interested
for the fp-contract combines.
Use the ORE instance to emit FastISel failures as remarks (instead of
the mix of dbgs() dumps and statistics that we currently have).
Eventually, we want to have an API that tells us whether remarks are
enabled (http://llvm.org/PR32352) so that we don't emit expensive
remarks (in this case, dumping IR) when it's not needed. For now, use
'isEnabled' as a crude replacement.
This does mean that the replacement for '-fast-isel-verbose' is now
'-pass-remarks-missed=isel'. Additionally, clang users also need to
enable remark diagnostics, using '-Rpass-missed=isel'.
This also removes '-fast-isel-verbose2': there are no static statistics
that we want to only enable in asserts builds, so we can always use
the remarks regardless of the build type.
Differential Revision: https://reviews.llvm.org/D31405
llvm-svn: 299093
Turns out integerPartWidth only explicitly defines the width of the tc functions in the APInt class. Functions that aren't used by APInt implementation itself. Many places in the code base already assume APInt is made up of 64-bit pieces. Explicitly assuming 64-bit here doesn't make that situation much worse. A full audit would need to be done if it ever changes.
llvm-svn: 299059
Properly propagate the FMF from the LLVM IR to this flag.
This is toward moving fp-contraction=fast from an LLVM TargetOption to a
FastMathFlag in order to fix PR25721.
Differential Revision: https://reviews.llvm.org/D31165
llvm-svn: 298961
Deal with case that initial node is deleted during dag-combine leading
to an assertional failure in promoteIntShiftOp.
Fixes PR32420.
Reviewers: spatel, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31403
llvm-svn: 298931
Reorder work in PromoteIntBinOp to prevent stale (deleted) nodes from
being used.
Fixes PR32340 and PR32345.
Reviewers: hfinkel, dbabokin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31148
llvm-svn: 298923
This is the payoff for D31156 - if a target has efficient comparison instructions for vector-sized equality,
we can replace memcmp calls with inline code that is both smaller and faster.
Differential Revision: https://reviews.llvm.org/D31290
llvm-svn: 298775
Summary:
This class is a list of AttributeSetNodes corresponding the function
prototype of a call or function declaration. This class used to be
called ParamAttrListPtr, then AttrListPtr, then AttributeSet. It is
typically accessed by parameter and return value index, so
"AttributeList" seems like a more intuitive name.
Rename AttributeSetImpl to AttributeListImpl to follow suit.
It's useful to rename this class so that we can rename AttributeSetNode
to AttributeSet later. AttributeSet is the set of attributes that apply
to a single function, argument, or return value.
Reviewers: sanjoy, javed.absar, chandlerc, pete
Reviewed By: pete
Subscribers: pete, jholewinski, arsenm, dschuff, mehdi_amini, jfb, nhaehnle, sbc100, void, llvm-commits
Differential Revision: https://reviews.llvm.org/D31102
llvm-svn: 298393
Previously, PromoteIntRes_TRUNCATE() did not handle the case where
the operand needs widening, which resulted in llvm_unreachable().
This patch adds the needed handling, along with a test case.
Review: Eli Friedman, Simon Pilgrim.
https://reviews.llvm.org/D31077
llvm-svn: 298357
We make the assumption in most of our constant folding code that a fp2int will target an integer of 128-bits or less, calling the APFloat::convertToInteger with only uint64_t[2] of raw bits for the result.
Fuzz testing (PR24662) showed that we don't handle other cases at all, resulting in stack overflows and all sorts of crashes.
This patch uses the APSInt version of APFloat::convertToInteger instead to better handle such cases.
Differential Revision: https://reviews.llvm.org/D31074
llvm-svn: 298226
Handle TokenFactors more aggressively in
SDValue::reachesChainWithoutSideEffects. This isn't really a
very effective change anymore because of other changes to
chain handling, but it's a cheap check, and the expanded
comments are still useful.
It might be possible to loosen the hasOneUse() requirement with a
deeper analysis, but a naive implementation of that check would be
expensive.
Differential Revision: https://reviews.llvm.org/D29845
llvm-svn: 298156
Users often call getArgumentList().size(), which is a linear way to get
the number of function arguments. arg_size(), on the other hand, is
constant time.
In general, the fact that arguments are stored in an iplist is an
implementation detail, so I've removed it from the Function interface
and moved all other users to the argument container APIs (arg_begin(),
arg_end(), args(), arg_size()).
Reviewed By: chandlerc
Differential Revision: https://reviews.llvm.org/D31052
llvm-svn: 298010
Don't scalarize VSELECT->SETCC when operands/results needs to be widened,
or when the type of the SETCC operands are different from those of the VSELECT.
(VSELECT SETCC) and (VSELECT (AND/OR/XOR (SETCC,SETCC))) are handled.
The previous splitting of VSELECT->SETCC in DAGCombiner::visitVSELECT() is
no longer needed and has been removed.
Updated tests:
test/CodeGen/ARM/vuzp.ll
test/CodeGen/NVPTX/f16x2-instructions.ll
test/CodeGen/X86/2011-10-19-widen_vselect.ll
test/CodeGen/X86/2011-10-21-widen-cmp.ll
test/CodeGen/X86/psubus.ll
test/CodeGen/X86/vselect-pcmp.ll
Review: Eli Friedman, Simon Pilgrim
https://reviews.llvm.org/D29489
llvm-svn: 297930
This patch replaces ORs with getHighBits/getLowBits etc. with setLowBits/setHighBits/setBitsFrom.
In a few of the places we weren't ORing, but the KnownZero/KnownOne vectors were already initialized to zero. We exploit this in most places already there were just some that were inconsistent.
Differential Revision: https://reviews.llvm.org/D30965
llvm-svn: 297860
Reduced version of D26357 - based on the discussion on llvm-dev about canonicalization of UMIN/UMAX/SMIN/SMAX as well as ABS I've reduced that patch to just the ABS ISD node (with x86/sse support) to improve basic combines and lowering.
ARM/AArch64, Hexagon, PowerPC and NVPTX all have similar instructions allowing us to make this a generic opcode and move away from the hard coded tablegen patterns which makes it tricky to match more complex patterns.
At the moment this patch doesn't attempt legalization as we only create an ABS node if its legal/custom.
Differential Revision: https://reviews.llvm.org/D29639
llvm-svn: 297780
Create nodes for smulwb and smulwt and move their selection from
DAGToDAG to DAG combine. smlawb and smlawt can then be selected
using tablegen. Added some helper functions to detect shift patterns
as well as a wrapper around SimplifyDemandBits. Added a couple of
extra tests.
Differential Revision: https://reviews.llvm.org/D30708
llvm-svn: 297716
When checking if chain node is foldable, make sure the intermediate nodes have a single use across all results not just the result that was used to reach the chain node.
This recovers a test case that was severely broken by r296476, my making sure we don't create ADD/ADC that loads and stores when there is also a flag dependency.
llvm-svn: 297698
Recommiting with compiler time improvements
Recommitting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 297695
Summary:
Depends on D30379
This improves the state of things for the sub class of operation.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30436
llvm-svn: 297482
Summary: As per title. This is extracted from D29872 and I threw SADDO in.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30379
llvm-svn: 297479
We currently have to insert bits via a temporary variable of the same size as the target with various shift/mask stages, resulting in further temporary variables, all of which require the allocation of memory for large APInts (MaskSizeInBits > 64).
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::insertBits() helper method which avoids the temporary memory allocation and masks/inserts the raw bits directly into the target.
Differential Revision: https://reviews.llvm.org/D30780
llvm-svn: 297458
Summary: This essentially does the same transform as for ADC.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30417
llvm-svn: 297416
Summary: This essentially does the same transform as for SUBC.
Reviewers: jyknight, nemanjai, mkuper, spatel, RKSimon, zvi, bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30437
llvm-svn: 297404
As discussed in the review thread for rL297026, this is actually 2 changes that
would independently fix all of the test cases in the patch:
1. Return undef in FoldConstantArithmetic for div/rem by 0.
2. Move basic undef simplifications for div/rem (simplifyDivRem()) before
foldBinopIntoSelect() as a matter of efficiency.
I will handle the case of vectors with any zero element as a follow-up. That change
is the DAG sibling for D30665 + adding a check of vector elements to FoldConstantVectorArithmetic().
I'm deleting the test for PR30693 because it does not test for the actual bug any more
(dangers of using bugpoint).
Differential Revision:
https://reviews.llvm.org/D30741
llvm-svn: 297384
This helps in cases involving bitfields where an AND is exposed by
legalization.
Differential Revision: https://reviews.llvm.org/D30472
llvm-svn: 297249
This is known incomplete and not called in the right order relative to
other folds, but that's the current behavior. I'm just trying to clean
this up before making actual functional changes to make the patch smaller.
The logic here should mimic the IR equivalents that are in InstSimplify's
simplifyDivRem().
llvm-svn: 297086
Refactoring of duplicated code and more fixes to follow.
This is motivated by the post-commit comments for r296699:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20170306/435182.html
Ie, we can crash if we're missing obvious simplifications like this that
exist in the IR simplifier or if these occur later than expected.
The x86 change for non-splat division shows a potential opportunity to improve
vector codegen: we assumed that since only one lane had meaningful results, we
should do the math in scalar. But that means moving back and forth from vector
registers.
llvm-svn: 297026
As described on PR31712, we miss a variety of legalization combines because we lower these to X86ISD::VSEXT/VZEXT despite them having the same functionality. This patch makes 128-bit (SSE41) SIGN/ZERO_EXTEND_VECTOR_IN_REG ops legal, adds the necessary tablegen plumbing and uses a helper 'getExtendInVec' to decide when to use SIGN/ZERO_EXTEND_VECTOR_IN_REG or VSEXT/VZEXT.
We're missing a couple of shuffle combines that will be added in a future patch for review.
Later patches can then support the AVX2 cases as a mixture of SIGN/ZERO_EXTEND and SIGN/ZERO_EXTEND_VECTOR_IN_REG, and then finally deal with the AVX512 cases.
Differential Revision: https://reviews.llvm.org/D30549
llvm-svn: 296985
This is more efficient by itself. But this is prep for a future patch that may remove APInt::Or while making operator| support rvalue references similar to add/sub.
llvm-svn: 296981
select Cond, C +/- 1, C --> add(ext Cond), C -- with a target hook.
This is part of the ongoing process to obsolete D24480. The motivation is to
canonicalize to select IR in InstCombine whenever possible, so we need to have a way to
undo that easily in codegen.
PowerPC is an obvious winner for this kind of transform because it has fast and complete
bit-twiddling abilities but generally lousy conditional execution perf (although this might
have changed in recent implementations).
x86 also sees some wins, but the effect is limited because these transforms already mostly
exist in its target-specific combineSelectOfTwoConstants(). The fact that we see any x86
changes just shows that that code is a mess of special-case holes. We may be able to remove
some of that logic now.
My guess is that other targets will want to enable this hook for most cases. The likely
follow-ups would be to add value type and/or the constants themselves as parameters for the
hook. As the tests in select_const.ll show, we can transform any select-of-constants to
math/logic, but the general transform for any 2 constants needs one more instruction
(multiply or 'and').
ARM is one target that I think may not want this for most cases. I see infinite loops there
because it wants to use selects to enable conditionally executed instructions.
Differential Revision: https://reviews.llvm.org/D30537
llvm-svn: 296977
Summary:
When replacing a SDValue, we should remove the replaced value from
SoftenedFloats (and possibly the other maps as well?).
When we revisit a Node because it needs analyzing again, we have to
remove all result values from SoftenedFloats (and possibly other maps?).
This fixes the fp128 test failures with expensive checks for X86.
I think we probably should also remove the values from the other maps
(PromotedIntegers and so on), let me know what you think.
Reviewers: baldrick, bogner, davidxl, ab, arsenm, pirama, chh, RKSimon
Reviewed By: chh
Subscribers: danalbert, wdng, srhines, hfinkel, sepavloff, llvm-commits
Differential Revision: https://reviews.llvm.org/D29265
llvm-svn: 296964
This patch causes compile times for some patterns to explode. I have
a (large, unreduced) test case that slows down by more than 20x and
several test cases slow down by 2x. I'm sending some of the test cases
directly to Nirav and following up with more details in the review log,
but this should unblock anyone else hitting this.
llvm-svn: 296862
Summary:
Currently, when 't1: i1 = setcc t2, t3, cc' followed by 't4: i1 = xor t1, Constant:i1<-1>' is folded into 't5: i1 = setcc t2, t3 !cc', SDLoc of newly created SDValue 't5' follows SDLoc of 't4', not 't1'. However, as the opcode of newly created SDValue is 'setcc', it make more sense to take DebugLoc from 't1' than 't4'. For the code below
```
extern int bar();
extern int baz();
int foo(int x, int y) {
if (x != y)
return bar();
else
return baz();
}
```
, following is the bitcode representation of 'foo' at the end of llvm-ir level optimization:
```
define i32 @foo(i32 %x, i32 %y) !dbg !4 {
entry:
tail call void @llvm.dbg.value(metadata i32 %x, i64 0, metadata !9, metadata !11), !dbg !12
tail call void @llvm.dbg.value(metadata i32 %y, i64 0, metadata !10, metadata !11), !dbg !13
%cmp = icmp ne i32 %x, %y, !dbg !14
br i1 %cmp, label %if.then, label %if.else, !dbg !16
if.then: ; preds = %entry
%call = tail call i32 (...) @bar() #3, !dbg !17
br label %return, !dbg !18
if.else: ; preds = %entry
%call1 = tail call i32 (...) @baz() #3, !dbg !19
br label %return, !dbg !20
return: ; preds = %if.else, %if.then
%retval.0 = phi i32 [ %call, %if.then ], [ %call1, %if.else ]
ret i32 %retval.0, !dbg !21
}
!14 = !DILocation(line: 5, column: 9, scope: !15)
!16 = !DILocation(line: 5, column: 7, scope: !4)
```
As you can see, in 'entry' block, 'icmp' instruction and 'br' instruction have different debug locations. However, with current implementation, there's no distinction between debug locations of these two when they are lowered to asm instructions. This is because 'icmp' and 'br' become 'setcc' 'xor' and 'brcond' in SelectionDAG, where SDLoc of 'setcc' follows the debug location of 'icmp' but SDLOC of 'xor' and 'brcond' follows the debug location of 'br' instruction, and SDLoc of 'xor' overwrites SDLoc of 'setcc' when they are folded. This patch addresses this issue.
Reviewers: atrick, bogner, andreadb, craig.topper, aprantl
Reviewed By: andreadb
Subscribers: jlebar, mkuper, jholewinski, andreadb, llvm-commits
Differential Revision: https://reviews.llvm.org/D29813
llvm-svn: 296825
This bug was introduced with:
https://reviews.llvm.org/rL296699
There may be a way to loosen the restriction, but for now just bail out
on any opaque constant.
The tests show that opacity is target-specific. This goes back to cost
calculations in ConstantHoisting based on TTI->getIntImmCost().
llvm-svn: 296768
Summary:
This can be used to optimize large multiplications after legalization.
Depends on D29565
Reviewers: mkuper, spatel, RKSimon, zvi, bkramer, aaboud, craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29587
llvm-svn: 296711
This is part of the ongoing attempt to improve select codegen for all targets and select
canonicalization in IR (see D24480 for more background). The transform is a subset of what
is done in InstCombine's FoldOpIntoSelect().
I first noticed a regression in the x86 avx512-insert-extract.ll tests with a patch that
hopes to convert more selects to basic math ops. This appears to be a general missing DAG
transform though, so I added tests for all standard binops in rL296621
(PowerPC was chosen semi-randomly; it has scripted FileCheck support, but so do ARM and x86).
The poor output for "sel_constants_shl_constant" is tracked with:
https://bugs.llvm.org/show_bug.cgi?id=32105
Differential Revision: https://reviews.llvm.org/D30502
llvm-svn: 296699
Summary:
Avoids tons of prologue boilerplate when arguments are passed in memory
and left in memory. This can happen in a debug build or in a release
build when an argument alloca is escaped. This will dramatically affect
the code size of x86 debug builds, because X86 fast isel doesn't handle
arguments passed in memory at all. It only handles the x86_64 case of up
to 6 basic register parameters.
This is implemented by analyzing the entry block before ISel to identify
copy elision candidates. A copy elision candidate is an argument that is
used to fully initialize an alloca before any other possibly escaping
uses of that alloca. If an argument is a copy elision candidate, we set
a flag on the InputArg. If the the target generates loads from a fixed
stack object that matches the size and alignment requirements of the
alloca, the SelectionDAG builder will delete the stack object created
for the alloca and replace it with the fixed stack object. The load is
left behind to satisfy any remaining uses of the argument value. The
store is now dead and is therefore elided. The fixed stack object is
also marked as mutable, as it may now be modified by the user, and it
would be invalid to rematerialize the initial load from it.
Supersedes D28388
Fixes PR26328
Reviewers: chandlerc, MatzeB, qcolombet, inglorion, hans
Subscribers: igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D29668
llvm-svn: 296683
Add check that deleted nodes do not get added to worklist. This can
occur when a node's operand is simplified to an existing node.
This fixes PR32108.
Reviewers: jyknight, hfinkel, chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30506
llvm-svn: 296668
Resubmit r295336 after the bug with non-zero offset patterns on BE targets is fixed (r296336).
Support {a|s}ext, {a|z|s}ext load nodes as a part of load combine patters.
Reviewed By: filcab
Differential Revision: https://reviews.llvm.org/D29591
llvm-svn: 296651
When SDAGISel (top-down) selects a tail-call, it skips the remainder
of the block.
If, before that, FastISel (bottom-up) selected some of the (no-op) next
few instructions, we can end up with dead instructions following the
terminator (selected by SDAGISel).
We need to erase them, as we know they aren't necessary (in addition to
being incorrect).
We already do this when FastISel falls back on the tail-call itself.
Also remove the FastISel-emitted code if we fallback on the
instructions between the tail-call and the return.
llvm-svn: 296552
This recovers a test case that was severely broken by r296476, my making sure we don't create ADD/ADC that loads and stores when there is also a flag dependency.
llvm-svn: 296486
Recommiting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 296476
DAGCombiner already supports peeking thorough shuffles to improve vector element extraction, but legalization often leaves us in situations where we need to extract vector elements after shuffles have already been lowered.
This patch adds support for VECTOR_EXTRACT_ELEMENT/PEXTRW/PEXTRB instructions to attempt to handle target shuffles as well. I've covered some basic scenarios including handling shuffle mask scaling and the implicit zero-extension of PEXTRW/PEXTRB, there is more that could be done here (that I've mentioned in TODOs) but I haven't found many cases where its worth it.
Differential Revision: https://reviews.llvm.org/D30176
llvm-svn: 296381
This pattern is essentially a i16 load from p+1 address:
%p1.i16 = bitcast i8* %p to i16*
%p2.i8 = getelementptr i8, i8* %p, i64 2
%v1 = load i16, i16* %p1.i16
%v2.i8 = load i8, i8* %p2.i8
%v2 = zext i8 %v2.i8 to i16
%v1.shl = shl i16 %v1, 8
%res = or i16 %v1.shl, %v2
Current implementation would identify %v1 load as the first byte load and would mistakenly emit a i16 load from %p1.i16 address. This patch adds a check that the first byte is loaded from a non-zero offset of the first load address. This way this address can be used as the base address for the combined value. Otherwise just give up combining.
llvm-svn: 296336
Recommiting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 296252
The motivation for filling out these select-of-constants cases goes back to D24480,
where we discussed removing an IR fold from add(zext) --> select. And that goes back to:
https://reviews.llvm.org/rL75531https://reviews.llvm.org/rL159230
The idea is that we should always canonicalize patterns like this to a select-of-constants
in IR because that's the smallest IR and the best for value tracking. Note that we currently
do the opposite in some cases (like the cases in *this* patch). Ie, the proposed folds in
this patch already exist in InstCombine today:
https://github.com/llvm-mirror/llvm/blob/master/lib/Transforms/InstCombine/InstCombineSelect.cpp#L1151
As this patch shows, most targets generate better machine code for simple ext/add/not ops
rather than a select of constants. So the follow-up steps to make this less of a patchwork
of special-case folds and missing IR canonicalization:
1. Have DAGCombiner convert any select of constants into ext/add/not ops.
2 Have InstCombine canonicalize in the other direction (create more selects).
Differential Revision: https://reviews.llvm.org/D30180
llvm-svn: 296137
During legalization we are often creating shuffles (via a build_vector scalarization stage) that are "any_extend_vector_inreg" style masks, and also other masks that are the equivalent of "truncate_vector_inreg" (if we had such a thing).
This patch is an attempt to match these cases to help undo the effects of just leaving shuffle lowering to handle it - which typically means we lose track of the undefined elements of the shuffles resulting in an unnecessary extension+truncation stage for widened illegal types.
The 2011-10-21-widen-cmp.ll regression will be fixed by making SIGN_EXTEND_VECTOR_IN_REG legal in SSE instead of lowering them to X86ISD::VSEXT (PR31712).
Differential Revision: https://reviews.llvm.org/D29454
llvm-svn: 295451
Resubmit -r295314 with PowerPC and AMDGPU tests updated.
Support {a|s}ext, {a|z|s}ext load nodes as a part of load combine patters.
Reviewed By: filcab
Differential Revision: https://reviews.llvm.org/D29591
llvm-svn: 295336
Support {a|s}ext, {a|z|s}ext load nodes as a part of load combine patters.
Reviewed By: filcab
Differential Revision: https://reviews.llvm.org/D29591
llvm-svn: 295314
We currently can't legalize those, but we should really not be creating
them in the first place, since legalization would probably look similar to the
way we legalize CONCAT_VECTORS - basically replace the INSERT with a BUILD.
This fixes PR311956.
Differential Revision: https://reviews.llvm.org/D29961
llvm-svn: 295213
Summary:
The current code loops over all elements to calculate a used range. Then a second short loop looks at the ranges and determines if they can be used in a extract and creates a properly aligned start index for the extract.
This range finding is unnecessary, we can just calculate a properly aligned start index for an extract for each input during the first loop. If we don't find the same start index for each indice we can't use an extract.
Reviewers: zvi, RKSimon
Reviewed By: zvi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29926
llvm-svn: 295152
To help assist in debugging ISEL or to prioritize GlobalISel backend
work, this patch adds two more tables to <Target>GenISelDAGISel.inc -
one which contains the patterns that are used during selection and the
other containing include source location of the patterns
Enabled through CMake varialbe LLVM_ENABLE_DAGISEL_COV
llvm-svn: 295081
Backends don't support this yet. They would have to move to the swifterror
register before the tail call to make sure it is live-in to the call.
rdar://30495920
llvm-svn: 294982
This is consistent with what we do for GlobalISel. That way, it is easy
to see whether or not FastISel is able to fully select a function.
At some point we may want to switch that to an optimization remark.
llvm-svn: 294970
The bug was introduced with:
https://reviews.llvm.org/rL294863
...and manifests as a selection failure in x86, but that's actually
another bug. This fix prevents wrong codegen with -0.0, but in the
more common case when we have NSZ and NNAN (-ffast-math), we should
still be able to fold this setcc/compare.
llvm-svn: 294924
I don't know if anything other than x86 vectors is affected by this change, but this may allow
us to remove target-specific intrinsics for blendv* (vector selects). The simplification arises
from the fact that blendv* instructions only use the sign-bit when deciding which vector element
to choose for the destination vector. The mechanism to fold VSELECT into SHRUNKBLEND nodes already
exists in x86 lowering; this demanded bits change just enables the transform to fire more often.
The original motivation starts with a bug for DSE of masked stores that seems completely unrelated,
but I've explained the likely steps in this series here:
https://llvm.org/bugs/show_bug.cgi?id=11210
Differential Revision: https://reviews.llvm.org/D29687
llvm-svn: 294863
The patch comes in 2 parts:
1 - it makes use of the SelectionDAG::NewNodesMustHaveLegalTypes flag to tell when it can safely constant fold illegal types.
2 - it correctly resets SelectionDAG::NewNodesMustHaveLegalTypes at the start of each call to SelectionDAGISel::CodeGenAndEmitDAG so all the pre-legalization stages can make use of it - not just the first basic block that gets handled.
Fix for PR30760
Differential Revision: https://reviews.llvm.org/D29568
llvm-svn: 294749
Summary:
With -debug, we aren't dumping the DAG after legalizing vector ops. In particular, on X86 with AVX1 only, we don't dump the DAG after we split 256-bit integer ops into pairs of 128-bit ADDs since this occurs during vector legalization.
I'm only dumping if the legalize vector ops changes something since we don't print anything during legalize vector ops. So this dump shows up right after the first type-legalization dump happens. So if nothing changed this second dump is unnecessary.
Having said that though, I think we should probably fix legalize vector ops to log what its doing.
Reviewers: RKSimon, eli.friedman, spatel, arsenm, chandlerc
Reviewed By: RKSimon
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D29554
llvm-svn: 294711
Summary:
Fix two bugs in SelectionDAGBuilder::FindMergedConditions reported by
Mikael Holmen. Handle non-canonicalized xor not operation
correctly (was assuming operand 0 was always the non-constant operand)
and check that the negated condition is also in the same block as the
original and/or instruction (as is done for and/or operands already)
before proceeding with optimization.
Reviewers: bogner, MatzeB, qcolombet
Subscribers: mcrosier, uabelho, llvm-commits
Differential Revision: https://reviews.llvm.org/D29680
llvm-svn: 294605
Hoist entry block code for arguments and swift error values out of the
basic block instruction selection loop. Lowering arguments once up front
seems much more readable than doing it conditionally inside the loop. It
also makes it clear that argument lowering can update StaticAllocaMap
because no instructions have been selected yet.
Also use range-based for loops where possible.
llvm-svn: 294329
This reverts commit r294186.
On an internal test, this triggers an out-of-memory error on PPC,
presumably because there is another dagcombine that does the exact
opposite triggering and endless loop consuming more and more memory.
Chandler has started at creating a reduced test case and we'll attach it
as soon as possible.
llvm-svn: 294288
Currently we only combine shuffle nodes if they have a single user to prevent us from causing code bloat by splitting the shuffles into several different combines.
We don't take into account that in some cases we will already have combined all the users during recursively calling up the shuffle tree.
This patch keeps a list of all the shuffle nodes that have been combined so far and permits combining of further shuffle nodes if all its users are in that list.
Differential Revision: https://reviews.llvm.org/D29399
llvm-svn: 294183
Summary:
Without this change, the getVR() call would hit an assert since it was
being passed a physical register.
Update the AArch64/ldst-opt.ll test with a case that triggers this
behavior by adding a run with strict-align, which causes an unaligned
STR XZR instruction to be split into byte stores, creating an
EXTRACT_SUBREG of XZR that triggers the original problem.
Reviewers: bogner, qcolombet, MatzeB, atrick
Subscribers: aemerson, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D29495
llvm-svn: 294129
Summary: This avoid the need to duplicate all pattern and actually end up exposing some opportunity to optimize existing pattern that did not exists in both directions on an existing test case.
Reviewers: mkuper, spatel, bkramer, RKSimon, zvi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29541
llvm-svn: 294125
This re-applies commit r292189, reverted in r292191.
SelectionDAGBuilder recognizes libfuncs using some homegrown
parameter type-checking.
Use TLI instead, removing another heap of redundant code.
This isn't strictly NFC, as the SDAG code was too lax.
Concretely, this means changes are required to a few tests:
- calling a non-variadic function via a variadic prototype isn't OK;
it just happens to work on x86_64 (but not on, e.g., aarch64).
- mempcpy has a size_t parameter; the SDAG code accepts any integer
type, which meant using i32 on x86_64 worked.
- a handful of SystemZ tests check the SDAG support for lax prototype
checking: Ulrich agrees on removing them.
I don't think it's worth supporting any of these (IMO) invalid
testcases. Instead, fix them to be more meaningful.
llvm-svn: 294028
ISD::DELETED_NODE && "NodeToMatch was removed partway through
selection"' failed.
NodeToMatch can be modified during matching, but code does not handle
this situation.
Differential Revision: https://reviews.llvm.org/D29292
llvm-svn: 294003
Recommiting after fixing X86 inc/dec chain bug.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 293893
Summary:
This way, the type legalization machinery will take care of registering
the result of this node properly.
This patches fixes all failing fp16 test cases with expensive checks.
(CodeGen/ARM/fp16-promote.ll, CodeGen/ARM/fp16.ll, CodeGen/X86/cvt16.ll
CodeGen/X86/soft-fp.ll)
Reviewers: t.p.northover, baldrick, olista01, bogner, jmolloy, davidxl, ab, echristo, hfinkel
Reviewed By: hfinkel
Subscribers: mehdi_amini, hfinkel, davide, RKSimon, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D28195
llvm-svn: 293765
Summary:
The affected transforms all implicitly use associativity of addition,
for which we usually require unsafe math to be enabled.
The "Aggressive" flag is only meant to convey information about the
performance of the fused ops relative to a fmul+fadd sequence.
Fixes Bug 31626.
Reviewers: spatel, hfinkel, mehdi_amini, arsenm, tstellarAMD
Subscribers: jholewinski, nemanjai, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D28675
llvm-svn: 293635
Previously, we would hit UB (or the ISD::DELETED_NODE assert) if we
happened to replace a node during UpdateChains, because it would be
left in the list we were iterating over. This nulls out the pointer
when that happens so that we can avoid the issue.
Fixes llvm.org/PR31710
llvm-svn: 293522
The type system already requires that the number of vector elements must fit in 32-bits so an index should as well. Even if the type of the index were larger all we care about is that the constant index can fit in 64-bits so that we can call getZExtValue.
llvm-svn: 293413
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
llvm-svn: 293359
In case of a SIGN/ZERO_EXTEND of an incomplete vector type (using only a
partial number of available vector elements), WidenVecRes_Convert() used to
resort to scalarization.
This patch adds a handling of the (common) case where an input vector can be
found of same width as the widened result vector, by converting the node to
SIGN/ZERO_EXTEND_VECTOR_INREG.
Review: Eli Friedman
llvm-svn: 293268
This commit introduces a set of experimental intrinsics intended to prevent
optimizations that make assumptions about the rounding mode and floating point
exception behavior. These intrinsics will later be extended to specify
flush-to-zero behavior. More work is also required to model instruction
dependencies in machine code and to generate these instructions from clang
(when required by pragmas and/or command line options that are not currently
supported).
Differential Revision: https://reviews.llvm.org/D27028
llvm-svn: 293226
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 293184
Later code expects the vector loads produced to be directly
concatenable, which means we shouldn't pad anything except the last load
produced with UNDEF.
llvm-svn: 293088
Reid Kleckner