Sections with the SHF_LINK_ORDER flag must be ordered in the same relative
order as the Sections they have a link to. When using a linker script an
arbitrary expression may be used for the virtual address of the
OutputSection. In some cases the virtual address does not monotonically
increase as the OutputSection index increases, so if we base the ordering
of the SHF_LINK_ORDER sections on the index then we can get the order
wrong. We fix this by moving SHF_LINK_ORDER resolution till after we have
created OutputSection virtual addresses.
Differential Revision: https://reviews.llvm.org/D79286
Summary:
Lld test ELF/linkerscript/thunk-gen-mips.s was accidentally disabled due
to the use of wrong FileCheck directives. As a result the test seems to
have bitrotted as it fails to pass if fixing the directive. To ease
updates to the test in case of change of the __start address the checks
have been changed to use numeric variables to express all the addresses
based on the __start address.
Reviewed By: atanasyan
Differential Revision: https://reviews.llvm.org/D79270
Lld test ELF/linkerscript/input-archive.s fails when path contain a @
because is not accepted in unquoted token in linker scripts which leads
to the path being broken in 2 around the @. This commit quotes the path
used in the linker script created by this and similar testcases allowing
the test to pass even in the presence of an @ sign in the path.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D79103
The current implementation assumes that R_PPC64_TOC16_HA is always followed
by R_PPC64_TOC16_LO_DS. This can break with R_PPC64_TOC16_LO:
// Load the address of the TOC entry, instead of the value stored at that address
addis 3, 2, .LC0@tloc@ha # R_PPC64_TOC16_HA
addi 3, 3, .LC0@tloc@l # R_PPC64_TOC16_LO
blr
which is used by boringssl's util/fipstools/delocate/delocate.go
https://github.com/google/boringssl/blob/master/crypto/fipsmodule/FIPS.md has some documentation.
In short, this tool converts an assembly file to avoid any potential relocations.
The distance to an input .toc is not a constant after linking, so it cannot use an `addis;ld` pair.
Instead, it jumps to a stub which loads the TOC entry address with `addis;addi`.
This patch checks the presence of R_PPC64_TOC16_LO and suppresses
toc-indirect to toc-relative relaxation if R_PPC64_TOC16_LO is seen.
This approach is conservative and loses some relaxation opportunities but is easy to implement.
addis 3, 2, .LC0@toc@ha # no relaxation
addi 3, 3, .LC0@toc@l # no relaxation
li 9, 0
addis 4, 2, .LC0@toc@ha # can relax but suppressed
ld 4, .LC0@toc@l(4) # can relax but suppressed
Also note that interleaved R_PPC64_TOC16_HA and R_PPC64_TOC16_LO_DS is
possible and this patch accounts for that.
addis 3, 2, .LC1@toc@ha # can relax
addis 4, 2, .LC2@toc@ha # can relax
ld 3, .LC1@toc@l(3) # can relax
ld 4, .LC2@toc@l(4) # can relax
Reviewed By: #powerpc, sfertile
Differential Revision: https://reviews.llvm.org/D78431
gold has an option --print-symbol-counts= which prints:
// For each archive
archive $archive $members $fetched_members
// For each object file
symbols $object $defined_symbols $used_defined_symbols
In most cases, `$defined_symbols = $used_defined_symbols` unless weak
symbols are present. Strangely `$used_defined_symbols` includes symbols defined relative to --gc-sections discarded sections.
The `symbols` lines do not appear to be useful.
`archive` lines are useful: `$fetched_members=0` lines correspond to
unused archives. The information can be used to trim dependencies.
This patch implements --print-archive-stats= which prints the number of
members and the number of fetched members for each archive.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D78983
--gdb-index currently crashes when reading a translation unit with
DWARF v5 .debug_loclists . Call stack:
```
SyntheticSections.cpp GdbIndexSection::create
SyntheticSections.cpp readAddressAreas
DWARFUnit.cpp DWARFUnit::tryExtractDIEsIfNeeded
DWARFListTable.cpp DWARFListTableHeader::extract
...
DWARFDataExtractor.cpp DWARFDataExtractor::getRelocatedValue
lld/ELF/DWARF.cpp LLDDwarfObj<ELFT>::find (sec.sec is nullptr)
...
```
This patch adds support for .debug_loclists to make `DWARFUnit::tryExtractDIEsIfNeeded` happy.
Building --gdb-index does not need .debug_loclists
Reviewed By: dblaikie, grimar
Differential Revision: https://reviews.llvm.org/D79061
This reverts commit 03ffe58605.
Full tile of reverted commit is:
[ELF][PPC64] Don't perform toc-indirect to toc-relative relaxation for
R_PPC64_TOC16_HA not followed by R_PPC64_TOC16_LO_DS
Breaks the multistage lld PowerPC buildbot.
The current implementation assumes that R_PPC64_TOC16_HA is always followed
by R_PPC64_TOC16_LO_DS. This can break with:
// Load the address of the TOC entry, instead of the value stored at that address
addis 3, 2, .LC0@tloc@ha # R_PPC64_TOC16_HA
addi 3, 3, .LC0@tloc@l # R_PPC64_TOC16_LO
blr
which is used by boringssl's util/fipstools/delocate/delocate.go
https://github.com/google/boringssl/blob/master/crypto/fipsmodule/FIPS.md has some documentation.
In short, this tool converts an assembly file to avoid any potential relocations.
The distance to an input .toc is not a constant after linking, so the assembly cannot use an `addis;ld` pair.
Instead, delocate changes the code to jump to a stub (`addis;addi`) which loads the TOC entry address.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D78431
GNU tools generate mapping symbols "$d" for .ARM.exidx sections. The
symbols are added to the symbol table much earlier than the merging
takes place, and after that, they become dangling. Before the patch,
LLD output those symbols as SHN_ABS with the value of 0. The patch
removes such symbols from the symbol table.
Differential Revision: https://reviews.llvm.org/D78820
Summary: The switch --plugin-opt=emit-asm can be used with the gold linker to dump the final assembly code generated by LTO in a user-friendly way. Unfortunately it doesn't work with lld. I'm hooking it up with lld. With that switch, lld emits assembly code into the output file (specified by -o) and if there are multiple input files, each of their assembly code will be emitted into a separate file named by suffixing the output file name with a unique number, respectively. The linking then stops after generating those assembly files.
Reviewers: espindola, wenlei, tejohnson, MaskRay, grimar
Reviewed By: tejohnson, MaskRay, grimar
Subscribers: pcc, emaste, inglorion, arichardson, hiraditya, MaskRay, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77231
When discarding local symbols with --discard-all or --discard-locals,
the ones which are used in relocations should be preserved. LLD used
the simplest approach and just ignored those switches when -r or
--emit-relocs was specified.
The patch implements handling the --discard-* switches for the cases
when relocations are kept by identifying used local symbols and allowing
removing only unused ones. This makes the behavior of LLD compatible
with GNU linkers.
Differential Revision: https://reviews.llvm.org/D77807
Fixed error detected by msan. The size field of the .ARM.exidx synthetic
section needs to be initialized to at least estimation level before
calling assignAddresses as that will use the size field.
This was previously reverted in 1ca16fc4f5.
Differential Revision: https://reviews.llvm.org/D78422
This reverts commit f969c2aa65.
There are some msan buildbot failures sanitzer-x86_64-linux-fast that
I need to investigate.
Differential Revision: https://reviews.llvm.org/D78422
The contents of the .ARM.exidx section must be ordered by SHF_LINK_ORDER
rules. We don't need to know the precise address for this order, but we
do need to know the relative order of sections. We have been using the
sectionIndex for this purpose, this works when the OutputSection order
has a monotonically increasing virtual address, but it is possible to
write a linker script with non-monotonically increasing virtual address.
For these cases we need to evaluate the base address of the OutputSection
so that we can order the .ARM.exidx sections properly.
This change moves the finalisation of .ARM.exidx till after the first
call to AssignAddresses. This permits us to sort on virtual address which
is linker script safe. It also permits a fix for part of pr44824 where
we generate .ARM.exidx section for the vector table when that table is so
far away it is out of range of the .ARM.exidx section. This fix will come
in a follow up patch.
Differential Revision: https://reviews.llvm.org/D78422
Time profiler emits relative timestamps for events (the number of
microseconds passed since the start of the current process).
This patch allows combining events from different processes while
preserving their relative timing by emitting a new attribute
"beginningOfTime". This attribute contains the system time that
corresponds to the zero timestamp of the time profiler.
This has at least two use cases:
- Build systems can use this to merge time traces from multiple compiler
invocations and generate statistics for the whole build. Tools like
ClangBuildAnalyzer could also leverage this feature.
- Compilers that use LLVM as their backend by invoking llc/opt in
a child process. If such a compiler supports generating time traces
of its own events, it could merge those events with LLVM-specific
events received from llc/opt, and produce a more complete time trace.
A proof-of-concept script that merges multiple logs that
contain a synchronization point into one log:
https://github.com/broadwaylamb/merge_trace_events
Differential Revision: https://reviews.llvm.org/D78030
For a relative path in INPUT() or GROUP(), this patch changes the search order by adding the directory of the current linker script.
The new search order (consistent with GNU ld >= 2.35 regarding the new test `test/ELF/input-relative.s`):
1. the directory of the current linker script (GNU ld from Binutils 2.35 onwards; https://sourceware.org/bugzilla/show_bug.cgi?id=25806)
2. the current working directory
3. library paths (-L)
This behavior makes it convenient to replace a .so or .a with a linker script with additional input. For example, glibc
```
% cat /usr/lib/x86_64-linux-gnu/libm.a
/* GNU ld script
*/
OUTPUT_FORMAT(elf64-x86-64)
GROUP ( /usr/lib/x86_64-linux-gnu/libm-2.29.a /usr/lib/x86_64-linux-gnu/libmvec.a )
```
could be simplified as `GROUP(libm-2.29.a libmvec.a)`.
Another example is to make libc++.a a linker script:
```
INPUT(libc++.a.1 libc++abi.a)
```
Note, -l is not affected.
Reviewed By: psmith
Differential Revision: https://reviews.llvm.org/D77779
After D78301 MC no longer emits a relocation for this case. Change to use
.inst and .reloc to synthesize the same instruction and relocation. One
more test case I missed.
If there is no SHF_TLS section, there will be no PT_TLS and Out::tlsPhdr may be a nullptr.
If the symbol referenced by an R_TLS is lazy, we should treat the symbol as undefined.
Also reorganize tls-in-archive.s and tls-weak-undef.s . They do not test what they intended to test.
This fixes a bug as exposed by D77807.
Add tests for {--emit-relocs,-r} x {--discard-locals,--discard-all}. They add coverage for previously undertested cases:
* STT_SECTION associated to GCed sections (`gc`)
* STT_SECTION associated to retained sections (`text`)
* STT_SECTION associated to non-SHF_ALLOC sections (`.comment`)
* STB_LOCAL in GCed sections (`unused_gc`)
Reviewed By: grimar, ikudrin
Differential Revision: https://reviews.llvm.org/D78389
D13550 added the diagnostic to address/work around a crash.
The rule was refined by D19836 (test/ELF/tls-archive.s) to exclude Lazy symbols.
https://bugs.llvm.org/show_bug.cgi?id=45598 reported another case where the current logic has a false positive:
Bitcode does not record undefined module-level inline assembly symbols
(`IRSymtab.cpp:Builder::addSymbol`). Such an undefined symbol does not
have the FB_tls bit and lld will not consider it STT_TLS. When the symbol is
later replaced by a STT_TLS Defined, lld will error "TLS attribute mismatch".
This patch fixes this false positive by allowing a STT_NOTYPE undefined
symbol to be replaced by a STT_TLS.
Considered alternative:
Moving the diagnostics to scanRelocs() can improve the diagnostics (PR36049)
but that requires a fair amount of refactoring. We will need more
RelExpr members. It requires more thoughts whether it is worthwhile.
See `test/ELF/tls-mismatch.s` for behavior differences. We will fail to
diagnose a likely runtime bug (STT_NOTYPE non-TLS relocation referencing
a TLS definition). This is probably acceptable because compiler
generated code sets symbol types properly.
Reviewed By: grimar, psmith
Differential Revision: https://reviews.llvm.org/D78438
D77522 changed --warn-backrefs to not warn for linking sandwich
problems (-ldef1 -lref -ldef2). This removed lots of false positives.
However, glibc still has some problems. libc.a defines some symbols
which are normally in libm.a and libpthread.a, e.g. __isnanl/raise.
For a linking order `-lm -lpthread -lc`, I have seen:
```
// different resolutions: GNU ld/gold select libc.a(s_isnan.o) as the definition
backward reference detected: __isnanl in libc.a(printf_fp.o) refers to libm.a(m_isnanl.o)
// different resolutions: GNU ld/gold select libc.a(raise.o) as the definition
backward reference detected: raise in libc.a(abort.o) refers to libpthread.a(pt-raise.o)
```
To facilitate deployment of --warn-backrefs, add --warn-backrefs-exclude= so that
certain known issues (which may be impractical to fix) can be whitelisted.
Deliberate choices:
* Not a comma-separated list (`--warn-backrefs-exclude=liba.a,libb.a`).
-Wl, splits the argument at commas, so we cannot use commas.
--export-dynamic-symbol is similar.
* Not in the style of `--warn-backrefs='*' --warn-backrefs=-liba.a`.
We just need exclusion, not inclusion. For easier build system
integration, we should avoid order dependency. With the current
scheme, we enable --warn-backrefs, and indivial libraries can add
--warn-backrefs-exclude=<glob> to their LDFLAGS.
Reviewed By: psmith
Differential Revision: https://reviews.llvm.org/D77512
See http://lists.llvm.org/pipermail/llvm-dev/2020-April/140549.html
For the record, GNU ld changed to 64k max page size in 2014
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=7572ca8989ead4c3425a1500bc241eaaeffa2c89
"[RFC] ld/ARM: Increase maximum page size to 64kB"
Android driver forced 4k page size in AArch64 (D55029) and ARM (D77746).
A binary linked with max-page-size=4096 does not run on a system with a
higher page size configured. There are some systems out there that do
this and it leads to the binary getting `Killed!` by the kernel.
In the non-linker-script cases, when linked with -z noseparate-code
(default), the max-page-size increase should not cause any size
difference. There may be some VMA usage differences, though.
Reviewed By: psmith, MaskRay
Differential Revision: https://reviews.llvm.org/D77330
Implemented a bunch of relocations found in binaries with medium/large code model and the Local-Exec TLS model. The binaries link and run fine in Qemu.
In addition, the emulation `elf64_sparc` is now recognized.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D77672
GCC collect2 passes several options to the linker even if LTO is not used
(note, lld does not support GCC LTO). The lto-wrapper may be a relative
path (especially during development, when gcc is in a build directory), e.g.
-plugin-opt=relative/path/to/lto-wrapper
We need to ignore such options, which are currently interpreted by
cl::ParseCommandLineOptions() and will fail with `error: --plugin-opt: ld.lld: Unknown command line argument 'relative/path/to/lto-wrapper'`
because the path is apparently not an option registered by an `llvm:🆑:opt`.
See lto-plugin-ignore.s for how we interpret various -plugin-opt= options now.
Reviewed By: grimar, tejohnson
Differential Revision: https://reviews.llvm.org/D78158
This patch changes the reproduce tests so that they no longer extract
the "long" paths of the generated reproduce tar archives. This
extraction prevented them from being run on Windows due to potential
issues relating to the Windows path length limit.
This patch also reduces the use of diff in these tests, as this was
raised as a performance concern in review D77659 and deemed unnecessary.
Differential Revision: https://reviews.llvm.org/D77750
The R_ARM_ALU_PC_G0 and R_ARM_LDR_PC_G0 relocations are used by the
ADR and LDR pseudo instructions, and are the basis of the group
relocations that can load an arbitrary constant via a series of add, sub
and ldr instructions.
The relocations need to be obtained via the .reloc directive.
R_ARM_ALU_PC_G0 is much more complicated as the add/sub instruction uses
a modified immediate encoding of an 8-bit immediate rotated right by an
even 4-bit field. This means that the range of representable immediates
is sparse. We extract the encoding and decoding functions for the modified
immediate from llvm/lib/Target/ARM/MCTargetDesc/ARMAddressingModes.h as
this header file is not accessible from LLD. Duplication of code isn't
ideal, but as these are well-defined mathematical functions they are
unlikely to change.
Differential Revision: https://reviews.llvm.org/D75349
This is an alternative design to D77512.
D45195 added --warn-backrefs to detect
* A. certain input orders which GNU ld either errors ("undefined reference")
or has different resolution semantics
* B. (byproduct) some latent multiple definition problems (-ldef1 -lref -ldef2) which I
call "linking sandwich problems". def2 may or may not be the same as def1.
When an archive appears more than once (-ldef -lref -ldef), lld and GNU
ld may have the same resolution but --warn-backrefs may warn. This is
not uncommon. For example, currently lld itself has such a problem:
```
liblldCommon.a liblldCOFF.a ... liblldCommon.a
_ZN3lld10DWARFCache13getDILineInfoEmm in liblldCOFF.a refers to liblldCommon.a(DWARF.cpp.o)
libLLVMSupport.a also appears twice and has a similar warning
```
glibc has such problems. It is somewhat destined because of its separate
libc/libpthread/... and arbitrary grouping. The situation is getting
improved over time but I have seen:
```
-lc __isnanl references -lm
-lc _IO_funlockfile references -lpthread
```
There are also various issues in interaction with other runtime
libraries such as libgcc_eh and libunwind:
```
-lc __gcc_personality_v0 references -lgcc_eh
-lpthread __gcc_personality_v0 references -lgcc_eh
-lpthread _Unwind_GetCFA references -lunwind
```
These problems are actually benign. We want --warn-backrefs to focus on
its main task A and defer task B (which is also useful) to a more
specific future feature (see gold --detect-odr-violations and
https://bugs.llvm.org/show_bug.cgi?id=43110).
Instead of warning immediately, we store the message and only report it
if no subsequent lazy definition exists.
The use of the static variable `backrefDiags` is similar to `undefs` in
Relocations.cpp
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D77522
SymbolAssignment::addr stores the location counter. The type should be
uint64_t instead of unsigned. The upper half of the address space is
commonly used by operating system kernels.
Similarly, SymbolAssignment::size should be an uint64_t. A kernel linker
script can move the location counter from 0 to the upper half of the
address space.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D77445
This is part of the Propeller framework to do post link code layout
optimizations. Please see the RFC here:
https://groups.google.com/forum/#!msg/llvm-dev/ef3mKzAdJ7U/1shV64BYBAAJ and the
detailed RFC doc here:
https://github.com/google/llvm-propeller/blob/plo-dev/Propeller_RFC.pdf
This patch adds lld support for basic block sections and performs relaxations
after the basic blocks have been reordered.
After the linker has reordered the basic block sections according to the
desired sequence, it runs a relaxation pass to optimize jump instructions.
Currently, the compiler emits the long form of all jump instructions. AMD64 ISA
supports variants of jump instructions with one byte offset or a four byte
offset. The compiler generates jump instructions with R_X86_64 32-bit PC
relative relocations. We would like to use a new relocation type for these jump
instructions as it makes it easy and accurate while relaxing these instructions.
The relaxation pass does two things:
First, it deletes all explicit fall-through direct jump instructions between
adjacent basic blocks. This is done by discarding the tail of the basic block
section.
Second, If there are consecutive jump instructions, it checks if the first
conditional jump can be inverted to convert the second into a fall through and
delete the second.
The jump instructions are relaxed by using jump instruction mods, something
like relocations. These are used to modify the opcode of the jump instruction.
Jump instruction mods contain three values, instruction offset, jump type and
size. While writing this jump instruction out to the final binary, the linker
uses the jump instruction mod to determine the opcode and the size of the
modified jump instruction. These mods are required because the input object
files are memory-mapped without write permissions and directly modifying the
object files requires copying these sections. Copying a large number of basic
block sections significantly bloats memory.
Differential Revision: https://reviews.llvm.org/D68065
Fixes https://bugs.llvm.org/show_bug.cgi?id=45391
The LTO code generator happens after version script scanning and may
create references which will fetch some lazy symbols.
Currently a version script does not assign VER_NDX_LOCAL to lazy symbols
and such symbols will be made global after they are fetched.
Change findByVersion and findAllByVersion to work on lazy symbols.
For unfetched lazy symbols, we should keep them non-local (D35263).
Check isDefined() in computeBinding() as a compensation.
This patch fixes a companion bug that --dynamic-list does not export
libcall fetched symbols.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D77280
finalizeSynthetic(in.symTab) calls sortSymTabSymbols() to order local
symbols before non-local symbols.
The newly added tests ensure that thunk symbols are added before
finalizeSynthetic(in.symTab), otherwise .symtab would be out of order.
A PC-relative relocation referencing a non-preemptible absolute symbol
(due to STT_TLS) is not representable in -pie/-shared mode.
Differential Revision: https://reviews.llvm.org/D77021
In the near future llvm-mc will resolve the fixups that generate
R_ARM_THUMB_PC8 and R_ARM_THUMB_PC12 at assembly time (see comments in
D72892), and forbid inter-section references. Change the LLD tests for
these relocations to use .inst and .reloc to avoid LLD tests failing when
this happens. The tests generate the same instructions, relocations
and symbols.
I will need to make equivalent changes for D75349 Arm equivalent
relocations, but this is still in review so these don't need changing
before llvm-mc.
Differential Revision: https://reviews.llvm.org/D77200
In most cases, LLD prints its multiline diagnostic messages starting
additional lines with ">>> ". That greatly helps external tools to parse
the output, simplifying combining several lines of the log back into one
message. The patch fixes the only message I found that does not follow
the common pattern.
Differential Revision: https://reviews.llvm.org/D77132
When reporting an "undefined symbol" diagnostic:
* We don't print @ for the reference.
* We don't print @ or @@ for the definition. https://bugs.llvm.org/show_bug.cgi?id=45318
This can lead to confusing diagnostics:
```
// foo may be foo@v2
ld.lld: error: undefined symbol: foo
>>> referenced by t1.o:(.text+0x1)
// foo may be foo@v1 or foo@@v1
>>> did you mean: foo
>>> defined in: t.so
```
There are 2 ways a symbol in symtab may get truncated:
* A @@ definition may be truncated *early* by SymbolTable::insert().
The name ends with a '\0'.
* A @ definition/reference may be truncated *later* by Symbol::parseSymbolVersion().
The name ends with a '@'.
This patch detects the second case and improves the diagnostics. The first case is
not improved but the second case is sufficient to make diagnostics not confusing.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D76999
--no-threads is a name copied from gold.
gold has --no-thread, --thread-count and several other --thread-count-*.
There are needs to customize the number of threads (running several lld
processes concurrently or customizing the number of LTO threads).
Having a single --threads=N is a straightforward replacement of gold's
--no-threads + --thread-count.
--no-threads is used rarely. So just delete --no-threads instead of
keeping it for compatibility for a while.
If --threads= is specified (ELF,wasm; COFF /threads: is similar),
--thinlto-jobs= defaults to --threads=,
otherwise all available hardware threads are used.
There is currently no way to override a --threads={1,2,...}. It is still
a debate whether we should use --threads=all.
Reviewed By: rnk, aganea
Differential Revision: https://reviews.llvm.org/D76885
The default GNU linker script uses the following idiom for the array
sections. I'll use .init_array here, but this also applies to
.preinit_array and .fini_array sections.
.init_array :
{
PROVIDE_HIDDEN (__init_array_start = .);
KEEP (*(.init_array))
PROVIDE_HIDDEN (__init_array_end = .);
}
The C-library will take references to the _start and _end symbols to
process the array. This will make LLD keep the OutputSection even if there
are no .init_array sections. As the current check for RELRO uses the
section type for .init_array the above example with no .init_array
InputSections fails the checks as there are no .init_array sections to give
the OutputSection a type of SHT_INIT_ARRAY. This often leads to a
non-contiguous RELRO error message.
The simple fix is to a textual section match as well as a section type
match.
Differential Revision: https://reviews.llvm.org/D76915
This test covers the case where --gc-sections is used when there are
many sections. In particular, it ensures that there is no adverse
interaction with common and absolute symbols.
Reviewed by: MaskRay, grimar
Differential Revision: https://reviews.llvm.org/D76003
The test had a few style issues, and I noticed a hole in the coverage
(namely that the search order wasn't tested). Adding cases for the hole
in turn meant other cases weren't important.
The .so test case isn't important, since the code is shared code, so
I've removed it. Additionally, I've modified the usage of the "bar"
directive to show that an unneeded library must still be present, or the
link will fail, even though it isn't linked in.
Reviewed by: MaskRay, grimar
Differential Revision: https://reviews.llvm.org/D76851
As of a while ago, lld groups all undefined references to a single
symbol in a single diagnostic. Back then, I made it so that we
print up to 10 references to each undefined symbol.
Having used this for a while, I never wished there were more
references, but I sometimes found that this can print a lot of
output. lld prints up to 10 diagnostics by default, and if
each has 10 references (which I've seen in practice), and each
undefined symbol produces 2 (possibly very long) lines of output,
that's over 200 lines of error output.
Let's try it with just 3 references for a while and see how
that feels in practice.
Differential Revision: https://reviews.llvm.org/D77017
Currently, `error: incompatible section flags for .rodata` is reported
when we mix SHF_LINK_ORDER and non-SHF_LINK_ORDER sections in an output section.
This is overconstrained. This patch allows mixed flags with the
requirement that SHF_LINK_ORDER sections must be contiguous. Mixing
flags is used by Linux aarch64 (https://github.com/ClangBuiltLinux/linux/issues/953)
.init.data : { ... KEEP(*(__patchable_function_entries)) ... }
When the integrated assembler is enabled, clang's -fpatchable-function-entry=N[,M]
implementation sets the SHF_LINK_ORDER flag (D72215) to fix a number of
garbage collection issues.
Strictly speaking, the ELF specification does not require contiguous
SHF_LINK_ORDER sections but for many current uses of SHF_LINK_ORDER like
.ARM.exidx/__patchable_function_entries there has been a requirement for
the sections to be contiguous on top of the requirements of the ELF
specification.
This patch also imposes one restriction: SHF_LINK_ORDER sections cannot
be separated by a symbol assignment or a BYTE command. Not allowing BYTE
is a natural extension that a non-SHF_LINK_ORDER cannot be a separator.
Symbol assignments can delimiter the contents of SHF_LINK_ORDER
sections. Allowing SHF_LINK_ORDER sections across symbol assignments
(especially __start_/__stop_) can make things hard to explain. The
restriction should not be a problem for practical use cases.
Reviewed By: psmith
Differential Revision: https://reviews.llvm.org/D77007
This fixes PR# 45336.
Output sections described in a linker script as NOLOAD with no input sections would be marked as SHT_PROGBITS.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D76981
Before this patch, it wasn't possible to extend the ThinLTO threads to all SMT/CMT threads in the system. Only one thread per core was allowed, instructed by usage of llvm::heavyweight_hardware_concurrency() in the ThinLTO code. Any number passed to the LLD flag /opt:lldltojobs=..., or any other ThinLTO-specific flag, was previously interpreted in the context of llvm::heavyweight_hardware_concurrency(), which means SMT disabled.
One can now say in LLD:
/opt:lldltojobs=0 -- Use one std::thread / hardware core in the system (no SMT). Default value if flag not specified.
/opt:lldltojobs=N -- Limit usage to N threads, regardless of usage of heavyweight_hardware_concurrency().
/opt:lldltojobs=all -- Use all hardware threads in the system. Equivalent to /opt:lldltojobs=$(nproc) on Linux and /opt:lldltojobs=%NUMBER_OF_PROCESSORS% on Windows. When an affinity mask is set for the process, threads will be created only for the cores selected by the mask.
When N > number-of-hardware-threads-in-the-system, the threads in the thread pool will be dispatched equally on all CPU sockets (tested only on Windows).
When N <= number-of-hardware-threads-on-a-CPU-socket, the threads will remain on the CPU socket where the process started (only on Windows).
Differential Revision: https://reviews.llvm.org/D75153
```
// llvm-objdump -d output (before)
0: bl .-4
4: bl .+0
8: bl .+4
// llvm-objdump -d output (after) ; GNU objdump -d
0: bl 0xfffffffc / bl 0xfffffffffffffffc
4: bl 0x4
8: bl 0xc
```
Many Operand's are not annotated as OPERAND_PCREL.
They are not affected (e.g. `b .+67108860`). I plan to fix them in future patches.
Modified test/tools/llvm-objdump/ELF/PowerPC/branch-offset.s to test
address space wraparound for powerpc32 and powerpc64.
Reviewed By: sfertile, jhenderson
Differential Revision: https://reviews.llvm.org/D76591
The error previously talked about a "section header" but was actually
referring to a program header.
Reviewed by: grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D76846
```
// llvm-objdump -d output (before)
400000: e8 0b 00 00 00 callq 11
400005: e8 0b 00 00 00 callq 11
// llvm-objdump -d output (after)
400000: e8 0b 00 00 00 callq 0x400010
400005: e8 0b 00 00 00 callq 0x400015
// GNU objdump -d. The lack of 0x is not ideal because the result cannot be re-assembled
400000: e8 0b 00 00 00 callq 400010
400005: e8 0b 00 00 00 callq 400015
```
In llvm-objdump, we pass the address of the next MCInst. Ideally we
should just thread the address of the current address, unfortunately we
cannot call X86MCCodeEmitter::encodeInstruction (X86MCCodeEmitter
requires MCInstrInfo and MCContext) to get the length of the MCInst.
MCInstPrinter::printInst has other callers (e.g llvm-mc -filetype=asm, llvm-mca) which set Address to 0.
They leave MCInstPrinter::PrintBranchImmAsAddress as false and this change is a no-op for them.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D76580
This behavior matches GNU ld and seems reasonable.
```
// If a SECTIONS command is not specified
.text.* -> .text
.rodata.* -> .rodata
.init_array.* -> .init_array
```
A proposed Linux feature CONFIG_FG_KASLR may depend on the GNU ld behavior.
Reword a comment about -z keep-text-section-prefix and a comment about
CommonSection (deleted by rL286234).
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D75225
This essentially drops the change by r288021 (discussed with Georgii Rymar
and Peter Smith and noted down in the release note of lld 10).
GNU ld>=2.31 enables -z separate-code by default for Linux x86. By
default (in the absence of a PHDRS command) a readonly PT_LOAD is
created, which is different from its traditional behavior.
Not emulating GNU ld's traditional behavior is good for us because it
improves code consistency (we create a readonly PT_LOAD in the absence
of a SECTIONS command).
Users can add --no-rosegment to restore the previous behavior (combined
readonly and read-executable sections in a single RX PT_LOAD).
Fixes https://bugs.llvm.org/show_bug.cgi?id=44903
It is about the following case:
```
SECTIONS {
.foo : { *(.foo) } =0x90909090
/DISCARD/ : { *(.bar) }
}
```
Here while parsing the fill expression we treated the
"/" of "/DISCARD/" as operator.
With this change, suggested by Fangrui Song, we do
not allow expressions with operators (e.g. "0x1100 + 0x22")
that are not wrapped into round brackets. It should not
be an issue for users, but helps to resolve parsing ambiguity.
Differential revision: https://reviews.llvm.org/D74687
Follow-up for D74433
What the function returns are almost standard BFD names, except that "ELF" is
in uppercase instead of lowercase.
This patch changes "ELF" to "elf" and changes ARM/AArch64 to use their BFD names.
MIPS and PPC64 have endianness differences as well, but this patch does not intend to address them.
Advantages:
* llvm-objdump: the "file format " line matches GNU objdump on ARM/AArch64 objects
* "file format " line can be extracted and fed into llvm-objcopy -O literally.
(https://github.com/ClangBuiltLinux/linux/issues/779 has such a use case)
Affected tools: llvm-readobj, llvm-objdump, llvm-dwarfdump, MCJIT (internal implementation detail, not exposed)
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D76046
Hexagon ABI specifies that call x@gdplt is transformed to call __tls_get_addr.
Example:
call x@gdplt
is changed to
call __tls_get_addr
When x is an external tls variable.
Differential Revision: https://reviews.llvm.org/D74443
Any OUTPUT_FORMAT in a linker script overrides the emulation passed on
the command line, so record the passed bfdname and use that in the error
message about incompatible input files.
This prevents confusing error messages. For example, if you explicitly
pass `-m elf_x86_64` to LLD but accidentally include a linker script
which sets `OUTPUT_FORMAT(elf32-i386)`, LLD would previously complain
about your input files being compatible with elf_x86_64, which isn't the
actual issue, and is confusing because the input files are in fact
x86-64 ELF files.
Interestingly enough, this also prevents a segfault! When we don't pass
`-m` and we have an object file which is incompatible with the
`OUTPUT_FORMAT` set by a linker script, the object file is checked for
compatibility before it's added to the objectFiles vector.
config->emulation, objectFiles, and sharedFiles will all be empty, so
we'll attempt to access bitcodeFiles[0], but bitcodeFiles is also empty,
so we'll segfault. This commit prevents the segfault by adding
OUTPUT_FORMAT as a possible source of machine configuration, and it also
adds an llvm_unreachable to diagnose similar issues in the future.
Differential Revision: https://reviews.llvm.org/D76109
-M output can be useful when diagnosing an "error: output file too large" problem (emitted in openFile()).
I just ran into such a situation where I had to debug an erronerous
Linux kernel linker script. It tried to create a file larger than
INT64_MAX bytes.
This patch could have helped https://bugs.llvm.org/show_bug.cgi?id=44715 as well.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D75966
See `docs/ELF/linker_script.rst` for the new computation for sh_addr and sh_addralign.
`ALIGN(section_align)` now means: "increase alignment to section_align"
(like yet another input section requirement).
The "start of section .foo changes from 0x11 to 0x20" warning no longer
makes sense. Change it to warn if sh_addr%sh_addralign!=0.
To decrease the alignment from the default max_input_align,
use `.output ALIGN(8) : {}` instead of `.output : ALIGN(8) {}`
See linkerscript/section-address-align.test as an example.
When both an output section address and ALIGN are set (can be seen as an
"undefined behavior" https://sourceware.org/ml/binutils/2020-03/msg00115.html),
lld may align more than GNU ld, but it makes a linker script working
with GNU ld hard to break with lld.
This patch can be considered as restoring part of the behavior before D74736.
Differential Revision: https://reviews.llvm.org/D75724
Summary:
Places orphan sections into a unique output section. This prevents the merging of orphan sections of the same name.
Matches behaviour of GNU ld --unique. --unique=pattern is not implemented.
Motivated user case shown in the test has 2 local symbols as they would appear if C++ source has been compiled with -ffunction-sections. The merging of these sections in the case of a partial link (-r) may limit the effectiveness of -gc-sections of a subsequent link.
Reviewers: espindola, jhenderson, bd1976llvm, edd, andrewng, JonChesterfield, MaskRay, grimar, ruiu, psmith
Reviewed By: MaskRay, grimar
Subscribers: emaste, arichardson, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75536
```
createFiles(args)
readDefsym
readerLinkerScript(*mb)
...
readMemory
readMemoryAssignment("ORIGIN", "org", "o") // eagerly evaluated
target = getTarget();
link(args)
writeResult<ELFT>()
...
finalizeSections()
script->processSymbolAssignments()
addSymbol(cmd) // with this patch, evaluated here
```
readMemoryAssignment eagerly evaluates ORIGIN/LENGTH and returns an uint64_t.
This patch postpones the evaluation to make
* --defsym and symbol assignments
* `CONSTANT(COMMONPAGESIZE)` (requires a non-null `lld:🧝:target`)
work. If the expression somehow requires interaction with memory
regions, the circular dependency may cause the expression to evaluate to
a strange value. See the new test added to memory-err.s
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D75763
llvm::call_once(initDwarfLine, [this]() { initializeDwarf(); });
Though it is not used in all places.
I need that patch for implementing "Remove obsolete debug info" feature
(D74169). But this caching mechanism is useful by itself, and I think it
would be good to use it without connection to "Remove obsolete debug info"
feature. So this patch changes inplace creation of DWARFContext with
its cached version.
Depends on D74308
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D74773
Currently `yaml2obj` require `Offset` field in a relocation description.
There are many cases when `Offset` is insignificant in a context of a test case.
Making `Offset` optional allows to simplify our test cases.
This is what this patch does.
Also, with this patch `obj2yaml` does not dump a zero offset of a relocation.
Differential revision: https://reviews.llvm.org/D75608
The new behavior matches GNU objdump. A pair of angle brackets makes tests slightly easier.
`.foo:` is not unique and thus cannot be used in a `CHECK-LABEL:` directive.
Without `-LABEL`, the CHECK line can match the `Disassembly of section`
line and causes the next `CHECK-NEXT:` to fail.
```
Disassembly of section .foo:
0000000000001634 .foo:
```
Bdragon: <> has metalinguistic connotation. it just "feels right"
Reviewed By: rupprecht
Differential Revision: https://reviews.llvm.org/D75713
* Delete boilerplate
* Change functions to return `Error`
* Test parsing errors
* Update callers of ARMAttributeParser::parse() to check the `Error` return value.
Since this patch touches nearly everything in the file, I apply
http://llvm.org/docs/Proposals/VariableNames.html and change variable
names to lower case.
Reviewed By: compnerd
Differential Revision: https://reviews.llvm.org/D75015
This fixes several issues. The behavior changes are:
A SHN_COMMON symbol does not have the 'g' flag.
An undefined symbol does not have 'g' or 'l' flag.
A STB_GLOBAL SymbolRef::ST_Unknown symbol has the 'g' flag.
A STB_LOCAL SymbolRef::ST_Unknown symbol has the 'l' flag.
Reviewed By: rupprecht
Differential Revision: https://reviews.llvm.org/D75659
This changes the output of `llvm-readelf -n` from:
```
Displaying notes found at file offset 0x<...> with length 0x<...>:
```
to:
```
Displaying notes found in: .note.foo
```
And similarly, adds a `Name:` field to the `llvm-readobj -n` output for notes.
This change not only increases GNU compatibility, it also makes it much easier to read notes. Note that we still fall back to printing the file offset/length in cases where we don't have a section name, such as when printing notes in program headers or printing notes in a partially stripped file (GNU readelf does the same).
Fixes llvm.org/PR41339.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D75647
Summary:
A test is passing `-o -` to lld in the hope of writing the output to
standard out but that is not the case. Instead it creates a file named
`-.lto.o`. This fixes it by creating a temporary file in the work
directory.
Differential Revision: https://reviews.llvm.org/D75605
Otherwise ld.lld -save-temps will crash when writing to ResolutionFile.
llvm-lto2 -save-temps does not crash because it exits immediately.
Reviewed By: evgeny777
Differential Revision: https://reviews.llvm.org/D75426
Similar to D63182 [ELF][PPC64] Don't report "relocation refers to a discarded section" for .toc
Reviewed By: Bdragon28
Differential Revision: https://reviews.llvm.org/D75419
Summary:
Extracted from D74773. Currently, errors happened while parsing
debug info are reported as errors. DebugInfoDWARF library treats such
errors as "Recoverable errors". This patch makes debug info errors
to be reported as warnings, to support DebugInfoDWARF approach.
Reviewers: ruiu, grimar, MaskRay, jhenderson, espindola
Reviewed By: MaskRay, jhenderson
Subscribers: emaste, aprantl, arichardson, arphaman, llvm-commits
Tags: #llvm, #debug-info, #lld
Differential Revision: https://reviews.llvm.org/D75234
MC will now output the R_ARM_THM_PC8, R_ARM_THM_PC12 and
R_ARM_THM_PREL_11_0 relocations. These are short-ranged relocations that
are used to implement the adr rd, literal and ldr rd, literal pseudo
instructions.
The instructions use a new RelExpr called R_ARM_PCA in order to calculate
the required S + A - Pa expression, where Pa is AlignDown(P, 4) as the
instructions add their immediate to AlignDown(PC, 4). We also do not want
these relocations to generate or resolve against a PLT entry as the range
of these relocations is so short they would never reach.
The R_ARM_THM_PC8 has a special encoding convention for the relocation
addend, the immediate field is unsigned, yet the addend must be -4 to
account for the Thumb PC bias. The ABI (not the architecture) uses the
convention that the 8-byte immediate of 0xff represents -4.
Differential Revision: https://reviews.llvm.org/D75042
They are purposefully skipped by input section descriptions (rL295324).
Similarly, --orphan-handling= should not warn/error for them.
This behavior matches GNU ld.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D75151
This makes --orphan-handling= less noisy.
This change also improves our compatibility with GNU ld.
GNU ld special cases .symtab, .strtab and .shstrtab . We need output section
descriptions for .symtab, .strtab and .shstrtab to suppress:
<internal>:(.symtab) is being placed in '.symtab'
<internal>:(.shstrtab) is being placed in '.shstrtab'
<internal>:(.strtab) is being placed in '.strtab'
With --strip-all, .symtab and .strtab can be omitted (note, --strip-all is not compatible with --emit-relocs).
Reviewed By: nickdesaulniers
Differential Revision: https://reviews.llvm.org/D75149
While the value of the CIE pointer field in a DWARF FDE record is
an offset to the corresponding CIE record from the beginning of
the section, for EH FDE records it is relative to the current offset.
Previously, we did not make that distinction when dumped both kinds
of FDE records and just printed the same value for the CIE pointer
field and the CIE offset; that was acceptable for DWARF FDEs but was
wrong for EH FDEs.
This patch fixes the issue by explicitly printing the offset of the
linked CIE object.
Differential Revision: https://reviews.llvm.org/D74613
With this --shuffle-sections=seed produces the same result in every
host.
Reviewed By: grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D74971
When the output section address (addrExpr) is specified, GNU ld warns if
sh_addr is different. This patch implements the warning.
Note, LinkerScript::assignAddresses can be called more than once. We
need to record the changed section addresses, and only report the
warnings after the addresses are finalized.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D74741
Follow-up for D74286.
Notations:
* alignExpr: the computed ALIGN value
* max_input_align: the maximum of input section alignments
This patch changes the following two cases to match GNU ld:
* When ALIGN is present, GNU ld sets output sh_addr to alignExpr, while lld use max(alignExpr, max_input_align)
* When addrExpr is specified but alignExpr is not, GNU ld sets output sh_addr to addrExpr, while lld uses `advance(0, max_input_align)`
Note, sh_addralign is still set to max(alignExpr, max_input_align).
lma-align.test is enhanced a bit to check we don't overalign sh_addr.
fixSectionAlignments() sets addrExpr but not alignExpr for the `!hasSectionsCommand` case.
This patch sets alignExpr as well so that max_input_align will be respected.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D74736
Summary:
This option causes lld to shuffle sections by assigning different
priorities in each run.
The use case for this is to introduce randomization in benchmarks. The
idea is inspired by the paper "Producing Wrong Data Without Doing
Anything Obviously Wrong!"
(https://www.inf.usi.ch/faculty/hauswirth/publications/asplos09.pdf). Unlike
the paper, we shuffle individual sections, not just input files.
Doing this in lld is particularly convenient as the --reproduce option
makes it easy to collect all the necessary bits for relinking the
program being benchmarked. Once that it is done, all that is needed is
to add --shuffle-sections=0 to the response file and relink before each
run of the benchmark.
Differential Revision: https://reviews.llvm.org/D74791
With this patch lld recognizes ARM SBREL relocations.
R_ARM*_MOVW_BREL relocations are not tested because they are not used.
Patch by Tamas Petz
Differential Revision: https://reviews.llvm.org/D74604
Summary:
Generate PAC protected plt only when "-z pac-plt" is passed to the
linker. GNU toolchain generates when it is explicitly requested[1].
When pac-plt is requested then set the GNU_PROPERTY_AARCH64_FEATURE_1_PAC
note even when not all function compiled with PAC but issue a warning.
Harmonizing the warning style for BTI/PAC/IBT.
Generate BTI protected PLT if case of "-z force-bti".
[1] https://www.sourceware.org/ml/binutils/2019-03/msg00021.html
Reviewers: peter.smith, espindola, MaskRay, grimar
Reviewed By: peter.smith, MaskRay
Subscribers: tatyana-krasnukha, emaste, arichardson, kristof.beyls, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74537
This reverts commit 80a34ae311 with fixes.
Previously, since bots turning on EXPENSIVE_CHECKS are essentially turning on
MachineVerifierPass by default on X86 and the fact that
inline-asm-avx-v-constraint-32bit.ll and inline-asm-avx512vl-v-constraint-32bit.ll
are not expected to generate functioning machine code, this would go
down to `report_fatal_error` in MachineVerifierPass. Here passing
`-verify-machineinstrs=0` to make the intent explicit.
This reverts commit 80a34ae311 with fixes.
On bots llvm-clang-x86_64-expensive-checks-ubuntu and
llvm-clang-x86_64-expensive-checks-debian only,
llc returns 0 for these two tests unexpectedly. I tweaked the RUN line a little
bit in the hope that LIT is the culprit since this change is not in the
codepath these tests are testing.
llvm\test\CodeGen\X86\inline-asm-avx-v-constraint-32bit.ll
llvm\test\CodeGen\X86\inline-asm-avx512vl-v-constraint-32bit.ll
Fixes https://bugs.llvm.org//show_bug.cgi?id=44878
When --strip-debug is specified, .debug* are removed from inputSections
while .rel[a].debug* (incorrectly) remain.
LinkerScript::addOrphanSections() requires the output section of a relocated
InputSectionBase to be created first.
.debug* are not in inputSections ->
output sections .debug* are not created ->
getOutputSectionName(.rel[a].debug*) dereferences a null pointer.
Fix the null pointer dereference by deleting .rel[a].debug* from inputSections as well.
Reviewed By: grimar, nickdesaulniers
Differential Revision: https://reviews.llvm.org/D74510
Recommit of 0b4a047bfb
(reverted in c29003813a) to incorporate
subsequent fix and add a warning when LLD's interworking behavior has
changed.
D73474 disabled the generation of interworking thunks for branch
relocations to non STT_FUNC symbols. This patch handles the case of BL and
BLX instructions to non STT_FUNC symbols. LLD would normally look at the
state of the caller and the callee and write a BL if the states are the
same and a BLX if the states are different.
This patch disables BL/BLX substitution when the destination symbol does
not have type STT_FUNC. This brings our behavior in line with GNU ld which
may prevent difficult to diagnose runtime errors when switching to lld.
This change does change how LLD handles interworking of symbols that do not
have type STT_FUNC from previous versions including the 10.0 release. This
brings LLD in line with ld.bfd but there may be programs that have not been
linked with ld.bfd that depend on LLD's previous behavior. We emit a warning
when the behavior changes.
A summary of the difference between 10.0 and 11.0 is that for symbols
that do not have a type of STT_FUNC LLD will not change a BL to a BLX or
vice versa. The table below enumerates the changes
| relocation | STT_FUNC | bit(0) | in | 10.0- out | 11.0+ out |
| R_ARM_CALL | no | 1 | BL | BLX | BL |
| R_ARM_CALL | no | 0 | BLX | BL | BLX |
| R_ARM_THM_CALL | no | 1 | BLX | BL | BLX |
| R_ARM_THM_CALL | no | 0 | BL | BLX | BL |
Differential Revision: https://reviews.llvm.org/D73542
We do not keep the actual value of the CIE ID field, because it is
predefined, and use a constant when dumping a CIE record. The issue
was that the predefined value is different for .debug_frame and
.eh_frame sections, but we always printed the one which corresponds
to .debug_frame. The patch fixes that by choosing an appropriate
constant to print.
See the following for more information about .eh_frame sections:
https://refspecs.linuxfoundation.org/LSB_5.0.0/LSB-Core-generic/LSB-Core-generic/ehframechpt.html
Differential Revision: https://reviews.llvm.org/D73627
Summary:
Even though this test is a check for failure, lld still attempts
to open the final output file, which fails when the default "a.out"
file is used and the current directory is read-only. Specifying an
output file works around this problem.
Reviewers: espindola
Subscribers: emaste, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74523
D43468+D44380 added INSERT [AFTER|BEFORE] for non-orphan sections. This patch
makes INSERT work for orphan sections as well.
`SECTIONS {...} INSERT [AFTER|BEFORE] .foo` does not set `hasSectionCommands`, so the result
will be similar to a regular link without a linker script. The differences when `hasSectionCommands` is set include:
* image base is different
* -z noseparate-code/-z noseparate-loadable-segments are unavailable
* some special symbols such as `_end _etext _edata` are not defined
The behavior is similar to GNU ld:
INSERT is not considered an external linker script.
This feature makes the section layout more flexible. It can be used to:
* Place .nv_fatbin before other readonly SHT_PROGBITS sections to mitigate relocation overflows.
* Disturb the layout to expose address sensitive application bugs.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D74375
GNU ld has a counterintuitive lang_propagate_lma_regions rule.
```
// .foo's LMA region is propagated to .bar because their VMA region is the same,
// and .bar does not have an explicit output section address (addr_tree).
.foo : { *(.foo) } >RAM AT> FLASH
.bar : { *(.bar) } >RAM
// An explicit output section address disables propagation.
.foo : { *(.foo) } >RAM AT> FLASH
.bar . : { *(.bar) } >RAM
```
In both cases, lld thinks .foo's LMA region is propagated and
places .bar in the same PT_LOAD, so lld diverges from GNU ld w.r.t. the
second case (lma-align.test).
This patch changes Writer<ELFT>::createPhdrs to disable propagation
(start a new PT_LOAD). A user of the first case can make linker scripts
portable by explicitly specifying `AT>`. By contrast, there was no
workaround for the old behavior.
This change uncovers another LMA related bug in assignOffsets() where
`ctx->lmaOffset = 0;` was omitted. It caused a spurious "load address
range overlaps" error for at2.test
The new PT_LOAD rule is complex. For convenience, I listed the origins of some subexpressions:
* rL323449: `sec->memRegion == load->firstSec->memRegion`; linkerscript/at3.test
* D43284: `load->lastSec == Out::programHeaders` (don't start a new PT_LOAD after program headers); linkerscript/at4.test
* D58892: `sec != relroEnd` (start a new PT_LOAD after PT_GNU_RELRO)
Reviewed By: psmith
Differential Revision: https://reviews.llvm.org/D74297
When lmaRegion is non-null, respect `sec->alignment`
This rule is analogous to `switchTo(sec)` which advances sh_addr (VMA).
This fixes the p_paddr misalignment issue as reported by
https://android-review.googlesource.com/c/trusty/external/trusted-firmware-a/+/1230058
Note, `sec->alignment` is the maximum of ALIGN and input section alignments. We may overalign LMA than GNU ld.
linkerscript/align-lma.s has a FIXME that demonstrates another bug:
`.bss ... >RAM` should be placed in a different PT_LOAD (GNU ld
behavior) because its lmaRegion (nullptr) is different from the previous
section's lmaRegion (ROM).
Reviewed By: psmith
Differential Revision: https://reviews.llvm.org/D74286
Also remove some test duplication and add a test case that shows the
maximum version is rejected (this also shows that the value in the error
message is actually in decimal, and not just missing an 0x prefix).
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D74403
This reverts commit rGcd5b308b828e, rGcd5b308b828e, rG8cedf0e2994c.
There are issues to be investigated for polly bots and bots turning on
EXPENSIVE_CHECKS.
There are still problems after the fix in
"[ELF][ARM] Fix regression of BL->BLX substitution after D73542"
so let's revert to get trunk back to green while we investigate.
See https://reviews.llvm.org/D73542
This reverts commit 5461fa2b1f.
This reverts commit 0b4a047bfb.
This adds some of LLD specific scopes and picks up optimisation scopes
via LTO/ThinLTO. Makes use of TimeProfiler multi-thread support added in
77e6bb3c.
Differential Revision: https://reviews.llvm.org/D71060
D73542 made a typo (`rel.type == R_PLT_PC`; should be `rel.expr`) and introduced a regression:
BL->BLX substitution was disabled when the target symbol is preemptible
(expr is R_PLT_PC).
The two added bl instructions in arm-thumb-interwork-shared.s check that
we patch BL to BLX.
Fixes https://bugs.chromium.org/p/chromium/issues/detail?id=1047531
Peter Smith