glibc/sysdeps/unix/sysv/linux/x86_64/sigaction.c libc.a(sigaction.o) has a CIE
with the augmentation string "zRS". Support 'S' to allow --icf={safe,all}.
Compatibility checks for PPC64PltCallStub and PPC64PCRelPLTStub are
added in this patch to prevent the usage of incompatible thunk/stub.
Reviewed By: sfertile, nemanjai, stefanp
Differential Revision: https://reviews.llvm.org/D85459
tl;dr See D81784 for the 'tombstone value' concept. This patch changes our behavior to be almost the same as GNU ld (except that we also use 1 for .debug_loc):
* .debug_ranges & .debug_loc: 1 (LLD<11: 0+addend; GNU ld uses 1 for .debug_ranges)
* .debug_*: 0 (LLD<11: 0+addend; GNU ld uses 0; future LLD: -1)
We make the tweaks because:
1) The new tombstone is novel and needs more time to be adopted by consumers before it's the default.
2) The old (gold) strategy had problems with zero-length functions - so rather than going back that, we're going to the GNU ld strategy which doesn't have that problem.
3) One slight tweak to (2) is to apply the .debug_ranges workaround to .debug_loc for the same reasons it applies to debug_ranges - to avoid terminating lists early.
-----
http://lists.llvm.org/pipermail/llvm-dev/2020-July/143482.html
The tombstone value -1 in .debug_line caused problems to lldb (fixed by D83957;
will be included in 11.0.0) and breakpad (fixed by
https://crrev.com/c/2321300). It may potentially affects other DWARF consumers.
For .debug_ranges & .debug_loc: 1, an argument preferring 1 (GNU ld for .debug_ranges) over -2 is that:
```
{-1, -2} <<< base address selection entry
{0, length} <<< address range
```
may create a situation where low_pc is greater than high_pc. So we use
1, the GNU ld behavior for .debug_ranges
For other .debug_* sections, there haven't been many reports. One issue is that
bloaty (src/dwarf.cc) can incorrectly count address ranges in .debug_ranges . To
reduce similar disruption, this patch changes the tombstone values to be similar to GNU ld.
This does mean another behavior change to the default trunk behavior. Sorry
about it. The default trunk behavior will be similar to release/11.x while we work on a transition plan for LLD users.
Reviewed By: dblaikie, echristo
Differential Revision: https://reviews.llvm.org/D84825
GNU ld allows sections after a non-SHF_ALLOC section to be covered by PT_LOAD
(PR37607) and assigns addresses to non-SHF_ALLOC output sections (similar to
SHF_ALLOC NOBITS sections. The location counter is not advanced).
This patch tries to fix PR37607 (remove a special case in
`Writer<ELFT>::createPhdrs`). To make the created PT_LOAD meaningful, we cannot
reset dot to 0 for a middle non-SHF_ALLOC output section. This results in
removal of two special cases in LinkerScript::assignOffsets. Non-SHF_ALLOC
non-orphan sections can have non-zero addresses like in GNU ld.
The zero address rule for non-SHF_ALLOC sections is weakened to apply to orphan
only. This results in a special case in createSection and findOrphanPos, respectively.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85100
Part of https://bugs.llvm.org/show_bug.cgi?id=41734
The semantics of SHF_LINK_ORDER have been extended to represent metadata
sections associated with some other sections (usually text).
The associated text section may be discarded (e.g. LTO) and we want the
metadata section to have sh_link=0 (D72899, D76802).
Normally the metadata section is only referenced by the associated text
section. sh_link=0 means the associated text section is discarded, and
the metadata section will be garbage collected. If there is another
section (.gc_root) referencing the metadata section, the metadata
section will be retained. It's the .gc_root consumer's job to validate
the metadata sections.
# This creates a SHF_LINK_ORDER .meta with sh_link=0
.section .meta,"awo",@progbits,0
1:
.section .meta,"awo",@progbits,foo
2:
.section .gc_root,"a",@progbits
.quad 1b
.quad 2b
Reviewed By: pcc, jhenderson
Differential Revision: https://reviews.llvm.org/D72904
GNU ld allows sections after a non-SHF_ALLOC section to be covered by PT_LOAD
(PR37607) and assigns addresses to non-SHF_ALLOC output sections (similar to
SHF_ALLOC NOBITS sections. The location counter is not advanced).
This patch tries to fix PR37607 (remove a special case in
`Writer<ELFT>::createPhdrs`). To make the created PT_LOAD meaningful, we cannot
reset dot to 0 for a middle non-SHF_ALLOC output section. This results in
removal of two special cases in LinkerScript::assignOffsets. Non-SHF_ALLOC
non-orphan sections can have non-zero addresses like in GNU ld.
The zero address rule for non-SHF_ALLOC sections is weakened to apply to orphan
only. This results in a special case in createSection and findOrphanPos, respectively.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85100
Fix PR36272 and PR46835
A .eh_frame FDE references a text section and (optionally) a LSDA (in
.gcc_except_table). Even if two text sections have identical content and
relocations (e.g. a() and b()), we cannot fold them if their LSDA are different.
```
void foo();
void a() {
try { foo(); } catch (int) { }
}
void b() {
try { foo(); } catch (float) { }
}
```
Scan .eh_frame pieces with LSDA and disallow referenced text sections to be
folded. If two .gcc_except_table have identical semantics (usually identical
content with PC-relative encoding), we will lose folding opportunity.
For ClickHouse (an exception-heavy application), this can reduce --icf=all efficiency
from 9% to 5%. There may be some percentage we can reclaim without affecting
correctness, if we analyze .eh_frame and .gcc_except_table sections.
gold 2.24 implemented a more complex fix (resolution to
https://sourceware.org/bugzilla/show_bug.cgi?id=21066) which combines the
checksum of .eh_frame CIE/FDE pieces.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D84610
--oformat=binary is rare (used in a few places in FreeBSD, see `stand/i386/mbr/Makefile` `LDFLAGS_BIN`)
The result should be identical to a normal output transformed by `objcopy -O binary`.
The current implementation ignores addresses and lays out sections by
respecting output section alignments. It can fail when an output section
address is specified, e.g. `.rodata ALIGN(16) :` (PR33651).
Fix PR33651 by respecting LMA. The code is similar to
`tools/llvm-objcop/ELF/Object.cpp` BinaryWriter::finalize after D71035 and D79229.
Unforunately for an output section without PT_LOAD, we assume its LMA is equal
to its VMA. So the result is still incorrect when an output section LMA
(`AT(...)`) is specified
Also drop `alignTo(off, config->wordsize)`. GNU ld does not round up the file size.
Differential Revision: https://reviews.llvm.org/D85086
See https://lists.llvm.org/pipermail/llvm-dev/2020-July/143373.html
"[llvm-dev] Multiple documents in one test file" for some discussions.
This patch has explored several alternatives. The current semantics are similar to
what @dblaikie proposed.
`split-file filename output` splits the input file into multiple parts separated by
regex `^(.|//)--- filename` and write each part to the file `output/filename`
(`filename` can include path separators).
Use case A (organizing input of different formats (e.g. linker
script+assembly) in one file).
```
# RUN: split-file %s %t
# RUN: llvm-mc %t/asm -o %t.o
# RUN: ld.lld -T %t/lds %t.o -o %t
This is sometimes better than the %S/Inputs/ approach because the user
can see the auxiliary files immediately and don't have to open another file.
# asm
...
# lds
...
```
Use case B (for utilities which don't have built-in input splitting
feature):
```
// RUN: split-file %s %t
// RUN: llc < %t/1.ll | FileCheck %s --check-prefix=CASE1
// RUN: llc < %t/2.ll | FileCheck %s --check-prefix=CASE2
Combing tests prudently can improve readability.
For example, when testing parsing errors if the recovery mechanism isn't possible,
grouping the tests in one file can more readily see test coverage/strategy.
//--- 1.ll
...
//--- 2.ll
...
```
Since this is a new utility, there is no git history concerns for
UpperCase variable names. I use lowerCase variable names like mlir/lld.
Reviewed By: jhenderson, lattner
Differential Revision: https://reviews.llvm.org/D83834
Clang and GCC have a feature (-MD flag) to create a dependency file
in a format that build systems such as Make or Ninja can read, which
specifies all the additional inputs such .h files.
This change introduces the same functionality to lld bringing it to
feature parity with ld and gold which gained this feature recently.
See https://sourceware.org/bugzilla/show_bug.cgi?id=22843 for more
details and discussion.
The implementation corresponds to -MD -MP compiler flag where the
generated dependency file also includes phony targets which works
around the errors where the dependency is removed. This matches the
format used by ld and gold.
Fixes PR42806
Differential Revision: https://reviews.llvm.org/D82437
D68049 created options for basic block sections: -fbasic-block-sections=,
-funique-basic-block-section-names. Rename options in llc and lld (--lto-)
to be consistent. Specifically,
+ Rename basicblock-sections to basic-block-sections
+ Rename unique-bb-section-names to unique-basic-block-section-names
Differential Revision: https://reviews.llvm.org/D84462
Clang and GCC have a feature (-MD flag) to create a dependency file
in a format that build systems such as Make or Ninja can read, which
specifies all the additional inputs such .h files.
This change introduces the same functionality to lld bringing it to
feature parity with ld and gold which gained this feature recently.
See https://sourceware.org/bugzilla/show_bug.cgi?id=22843 for more
details and discussion.
The implementation corresponds to -MD -MP compiler flag where the
generated dependency file also includes phony targets which works
around the errors where the dependency is removed. This matches the
format used by ld and gold.
Fixes PR42806
Differential Revision: https://reviews.llvm.org/D82437
This patch supports the situation where caller does not have a valid TOC and
calls using the R_PPC64_REL24_NOTOC relocation and the callee is not DSO local.
In this case the call cannot be made directly since the callee may or may not
require a valid TOC pointer. As a result this situation require a PC-relative
plt stub to set up r12.
Reviewed By: sfertile, MaskRay, stefanp
Differential Revision: https://reviews.llvm.org/D83669
This patch adds support for the LOG2CEIL builtin function in linker scripts: https://sourceware.org/binutils/docs/ld/Builtin-Functions.html#index-LOG2CEIL_0028exp_0029
As documented for LD, and to keep compatibility, LOG2CEIL(0) returns 0 (not -inf).
The test vectors are somewhat arbitrary. We check minimum values (0-4); middle values (2^32, and 2^32+1); and the maximum value (2^64-1).
The checks for LOG2CEIL explicitly use full 64-bit values (16 hex digits). This is needed to properly verify that -inf and other interesting results aren't returned. (For some reason, all other tests in operators.test use only 14 digits.)
Differential revision: https://reviews.llvm.org/D84054
See https://lists.llvm.org/pipermail/llvm-dev/2020-July/143373.html
"[llvm-dev] Multiple documents in one test file" for some discussions.
`extract part filename` splits the input file into multiple parts separated by
regex `^(.|//)--- ` and extract the specified part to stdout or the
output file (if specified).
Use case A (organizing input of different formats (e.g. linker
script+assembly) in one file).
```
// RUN: extract lds %s -o %t.lds
// RUN: extract asm %s -o %t.s
// RUN: llvm-mc %t.s -o %t.o
// RUN: ld.lld -T %t.lds %t.o -o %t
This is sometimes better than the %S/Inputs/ approach because the user
can see the auxiliary files immediately and don't have to open another file.
```
Use case B (for utilities which don't have built-in input splitting
feature):
```
// RUN: extract case1 %s | llc | FileCheck %s --check-prefix=CASE1
// RUN: extract case2 %s | llc | FileCheck %s --check-prefix=CASE2
Combing tests prudently can improve readability.
This is sometimes better than having multiple test files.
```
Since this is a new utility, there is no git history concerns for
UpperCase variable names. I use lowerCase variable names like mlir/lld.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D83834
-r --gc-sections is usually not useful because it just makes intermediate output
smaller. https://bugs.llvm.org/show_bug.cgi?id=46700#c7 mentions a use case:
validating the absence of undefined symbols ealier than in the final link.
After D84129 (SHT_GROUP support in -r links), we can support -r
--gc-sections without extra code. So let's allow it.
Reviewed By: grimar, jhenderson
Differential Revision: https://reviews.llvm.org/D84131
* If two group members are combined, we should leave just one index in the SHT_GROUP content.
* If a group member is discarded (/DISCARD/ or upcoming -r --gc-sections combination),
we should drop its index in the SHT_GROUP content. LLD currently crashes (`getOutputSection()` is null).
Reviewed By: psmith
Differential Revision: https://reviews.llvm.org/D84129
The PC Relative code now allows for calls that are marked with the relocation
R_PPC64_REL24_NOTOC. This indicates that the caller does not have a valid TOC
pointer in R2 and does not require R2 to be restored after the call.
This patch is added to support local calls to callees that require a TOC
Reviewed By: sfertile, MaskRay, nemanjai, stefanp
Differential Revision: https://reviews.llvm.org/D83504
The test fails in 32-bit Windows builds for unclear reasons:
ld.lld: error: failed to open
C:\src\llvm_package_1100-rc1\build32_stage0\tools\lld\test\ELF\Output\arm-exidx-range.s.tmp:
The parameter is incorrect.
After D69985, symbols for "-init" and "-fini" were unconditionally
marked as used even if they were just lazy symbols seen when scanning
archives. That resulted in exposing them in the symbol table of an
output file, as Undefined, which added unwanted dependencies. The patch
fixes the issue by checking the kind of the symbols before the marking.
Differential Revision: https://reviews.llvm.org/D83549
It allows handling cases when we have SHT_REL[A] sections before target
sections in objects.
This fixes https://bugs.llvm.org/show_bug.cgi?id=46632
which says: "Normally it is not what compilers would emit. We have to support it,
because some custom tools might want to use this feature, which is not restricted by ELF gABI"
Differential revision: https://reviews.llvm.org/D83469
Implements the missing relocation types for AVR target.
The results have been cross-checked with binutils.
Original patch by LemonBoy. Some changes by me.
Differential Revision: https://reviews.llvm.org/D78741
The PC Relative code allows for calls that are marked with the relocation
R_PPC64_REL24_NOTOC. This indicates that the caller does not have a valid TOC
pointer in R2 and does not require R2 to be restored after the call.
This patch is added to support local calls to callees tha also do not have a TOC.
Reviewed By: sfertile, MaskRay, stefanp
Differential Revision: https://reviews.llvm.org/D82816
The R_PPC64_REL24 is used in function calls when the caller requires a
valid TOC pointer. If the callee shares the same TOC or does not clobber
the TOC pointer then a direct call can be made. If the callee does not
share the TOC a thunk must be added to save the TOC pointer for the caller.
Up until PC Relative was introduced all local calls on medium and large code
models were assumed to share a TOC. This is no longer the case because
if the caller requires a TOC and the callee is PC Relative then the callee
can clobber the TOC even if it is in the same DSO.
This patch is to add support for a TOC caller calling a PC Relative callee that
clobbers the TOC.
Reviewed By: sfertile, MaskRay
Differential Revision: https://reviews.llvm.org/D82950
The patch adds checking for various potential issues in parsing name
lookup tables and reporting them as recoverable errors, similarly as we
do for other tables.
Differential Revision: https://reviews.llvm.org/D83050
The parsing method did not check reading errors and might easily fall
into an infinite loop on an invalid input because of that.
Differential Revision: https://reviews.llvm.org/D83049
... to customize the tombstone value we use for an absolute relocation
referencing a discarded symbol. This can be used as a workaround when
some debug processing tool has trouble with current -1 tombstone value
(https://bugs.chromium.org/p/chromium/issues/detail?id=1102223#c11 )
For example, to get the current built-in rules (not considering the .debug_line special case for ICF):
```
-z dead-reloc-in-nonalloc='.debug_*=0xffffffffffffffff'
-z dead-reloc-in-nonalloc=.debug_loc=0xfffffffffffffffe
-z dead-reloc-in-nonalloc=.debug_ranges=0xfffffffffffffffe
```
To get GNU ld (as of binutils 2.35)'s behavior:
```
-z dead-reloc-in-nonalloc='*=0'
-z dead-reloc-in-nonalloc=.debug_ranges=1
```
This option has other use cases. For example, if we want to check
whether a non-SHF_ALLOC section has dead relocations.
With this patch, we can run a regular LLD and run another with a special
-z dead-reloc-in-nonalloc=, then compare their output.
Reviewed By: thakis
Differential Revision: https://reviews.llvm.org/D83264
In GNU ld, --no-relax can disable x86-64 GOTPCRELX relaxation.
It is not useful, so we don't implement it.
For RISC-V, --no-relax disables linker relaxations which have larger
impact.
Linux kernel specifies --no-relax when CONFIG_DYNAMIC_FTRACE is specified
(since http://git.kernel.org/linus/a1d2a6b4cee858a2f27eebce731fbf1dfd72cb4e ).
LLD has not implemented the relaxations, so this option is a no-op.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D81359
Fangrui Song