Summary:
Many parallel tasks just want to iterate over all the possible numbers from 0 to N-1. Rather than enqueue N work items, instead just "map" the function across the requested integer space.
Reviewers: clayborg, labath, tberghammer, zturner
Reviewed By: clayborg, zturner
Subscribers: zturner, lldb-commits
Differential Revision: https://reviews.llvm.org/D32757
Patch by Scott Smith <scott.smith@purestorage.com>.
llvm-svn: 302223
Summary: ConstStrings are immutable, so there is no need to grab even a reader lock in order to read the length field.
Reviewers: #lldb, labath
Reviewed By: labath
Subscribers: zturner, labath, lldb-commits
Differential Revision: https://reviews.llvm.org/D32306
Patch by Scott Smith <scott.smith@purestorage.com>
llvm-svn: 301642
This patch makes adjustments to header file includes in
lldbUtility based on recommendations by the iwyu tool
(include-what-you-use). The goal here is to make sure that
all files include the exact set of headers which are needed
for that file only, to eliminate cases of dead includes (e.g.
someone deleted some code but forgot to delete the header
includes that that code necessitated), and to eliminate the
case where header includes are picked up transitively.
llvm-svn: 299676
GetNormalizedPath seems to be slow, so it's worth
shortcutting it if possible. This change does so
when the filenames and not equal and we can tell
GetNormalizedPath would not make them equal.
Also added a test for "." final component since that
was missing.
llvm-svn: 298876
This was causing a test failure in one of LLDB's tests which
specifically dealt with a limitation in LLVM's implementation
of home_directory() that LLDB's own implementation had worked
around.
This limitation has been addressed in r298513 on the LLVM side,
so the failing test (which is now unnecessary as the limitation
no longer exists) was removed in r298519, allowing this patch to
be re-submitted without modification.
llvm-svn: 298526
In doing so, clean up the MD5 interface a little. Most
existing users only care about the lower 8 bytes of an MD5,
but for some users that care about the upper and lower,
there wasn't a good interface. Furthermore, consumers
of the MD5 checksum were required to handle endianness
details on their own, so it seems reasonable to abstract
this into a nicer interface that just gives you the right
value.
Differential Revision: https://reviews.llvm.org/D31105
llvm-svn: 298322
Previously which path syntax we supported dependend on what
platform we were compiling LLVM on. While this is normally
desirable, there are situations where we need to be able to
handle a path that we know was generated on a remote host.
Remote debugging, for example, or parsing debug info.
99% of the code in LLVM for handling paths was platform
agnostic and literally just a few branches were gated behind
pre-processor checks, so this changes those sites to use
runtime checks instead, and adds a flag to every path
API that allows one to override the host native syntax.
Differential Revision: https://reviews.llvm.org/D30858
llvm-svn: 298004
Summary:
previously we switched to llvm streams for log output, this completes
the switch for the error streams.
I also clean up the includes and remove the unused argument from
DisableAllLogChannels().
This required adding a bit of boiler plate to convert the output in the
command interpreter, but that should go away when we switch command
results to use llvm streams as well.
Reviewers: zturner, eugene
Subscribers: lldb-commits, emaste
Differential Revision: https://reviews.llvm.org/D30894
llvm-svn: 297812
getpwent is not available on android until API level 21, and even then
it is only available when doing a non-static link. Since android's
concept of users is very different from linux, it's doubtful the home
directory resolution would be useful, so I approximate this state by
just not using getpwent on android.
We've had another getpwent occurance in FileSpec for a while -- it
wasn't causing problems because it was stripped out by the linker, but I
disable that also, for consistency's sake.
llvm-svn: 297612
FileSpec::EnumerateDirectory has a bunch of platform-specific
gunk in it for posix and non-posix platforms. We can get rid
of all this by using LLVM's easy-to-use directory iterators.
Differential Revision: https://reviews.llvm.org/D30807
llvm-svn: 297598
This reverts commit a6a29374662716710f80c8ece96629751697841e.
It has a few compilation failures that I don't have time to fix
at the moment.
llvm-svn: 297589
There were a couple of problems with this function on Windows. Different
separators and differences in how tilde expressions are resolved for
starters, but in addition there was no clear indication of what the
function's inputs or outputs were supposed to be, and there were no tests
to demonstrate its use.
To more easily paper over the differences between Windows paths,
non-Windows paths, and tilde expressions, I've ported this function to use
LLVM-based directory iteration (in fact, I would like to eliminate all of
LLDB's directory iteration code entirely since LLVM's is cleaner / more
efficient (i.e. it invokes fewer stat calls)). and llvm's portable path
manipulation library.
Since file and directory completion assumes you are referring to files and
directories on your local machine, it's safe to assume the path syntax
properties of the host in doing so, so LLVM's APIs are perfect for this.
I've also added a fairly robust set of unit tests. Since you can't really
predict what users will be on your machine, or what their home directories
will be, I added an interface called TildeExpressionResolver, and in the
unit test I've mocked up a fake implementation that acts like a unix
password database. This allows us to configure some fake users and home
directories in the test, so we can exercise all of those hard-to-test
codepaths that normally otherwise depend on the host.
Differential Revision: https://reviews.llvm.org/D30789
llvm-svn: 297585
Summary:
This fixes two threading issues in the logging code. The access to the
mask and options flags had data races when we were trying to
enable/disable logging while another thread was writing to the log.
Since we can log from almost any context, and we want it to be fast, so
I avoided locking primitives and used atomic variables instead. I have
also removed the (unused) setters for the mask and flags to make sure
that the only way to set them is through the enable/disable channel
functions.
I also add tests, which when run under tsan, verify that the use cases
like "doing an LLDB_LOGV while another thread disables logging" are
data-race-free.
Reviewers: zturner, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30702
llvm-svn: 297368
This was originall reverted due to some test failures in
ModuleCache and TestCompDirSymlink. These issues have all
been resolved and the code now passes all tests.
Differential Revision: https://reviews.llvm.org/D30698
llvm-svn: 297300
This functionality is subsumed by DataBufferLLVM, which is
also more efficient since it will try to mmap. However, we
don't yet support mmaping writable private sections, and in
some cases we were using ReadFileContents and then modifying
the buffer. To address that I've added a flag to the
DataBufferLLVM methods that allow you to map privately, which
disables the mmaping path entirely. Eventually we should teach
DataBufferLLVM to use mmap with writable private, but that is
orthogonal to this effort.
Differential Revision: https://reviews.llvm.org/D30622
llvm-svn: 297095
it was accessing the details of the Log class directly. Let it go
through the channel class instead.
This also discovered a bug when we were setting but not clearing the log
options when enabling a channel.
llvm-svn: 297053
All references to Host and Core have been removed, so this
class can now safely be lowered into Utility.
Differential Revision: https://reviews.llvm.org/D30559
llvm-svn: 296909
Summary: QPassSignals package allows lldb client to tell lldb-server to ignore certain types of signals and re-inject them back to inferior without stopping execution.
Reviewers: jmajors, labath
Subscribers: danalbert, srhines, emaste, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D30286
Author: Eugene Zemtsov <ezemtsov@google.com>
llvm-svn: 296101
Summary:
I originally set out to move the NameMatches closer to the relevant
function and add some unit tests. However, in the process I've found a
couple of bugs in the implementation:
- the early exits where not always correct:
- (test==pattern) does not mean the match will always suceed because
of regular expressions
- pattern.empty() does not mean the match will fail because the "" is
a valid prefix of any string
So I cleaned up those and added some tests. The only tricky part here
was that regcomp() implementation on darwin did not recognise the empty
string as a regular expression and returned an REG_EMPTY error instead.
The simples fix here seemed to be to replace the empty expression with
an equivalent non-empty one.
Reviewers: clayborg, zturner
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D30094
llvm-svn: 295651
With this patch, the only dependency left is from Utility
to Host. After this is broken, Utility will finally be
standalone.
Differential Revision: https://reviews.llvm.org/D29909
llvm-svn: 295088
Instead just rely on LLDB_LOG().
This is part of an effort to sort out dependency hell in LLDB.
Error is in Utility, but Log is in Core. Core can depend on
Utility, but not vice versa. So this patch moves the knowledge
about how to log Errors from the Error class to the Log file.
Differential Revision: https://reviews.llvm.org/D29514
llvm-svn: 294210
Summary:
The std::call_once implementation in libstdc++ has problems on few systems: NetBSD, OpenBSD and Linux PPC. LLVM ships with a homegrown implementation llvm::call_once to help on these platforms.
This change is required in the NetBSD LLDB port. std::call_once with libstdc++ results with crashing the debugger.
Sponsored by <The NetBSD Foundation>
Reviewers: labath, joerg, emaste, mehdi_amini, clayborg
Reviewed By: labath, clayborg
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29288
llvm-svn: 294202
Summary:
Per discussion in D28616, having two ways two request logging (log
enable lldb XXX verbose && log enable -v lldb XXX) is confusing. This
removes the first option and standardizes all code to use the second
one.
I've added a LLDB_LOGV macro as a shorthand for if(log &&
log->GetVerbose()) and switched most of the affected log statements to
use that (I've only left a couple of cases that were doing complex
computations in an if(log) block).
Reviewers: jingham, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D29510
llvm-svn: 294113
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
Summary:
This patch adds accurate dependency specifications to the mail LLDB libraries and tools.
In all cases except lldb-server, these dependencies are added in addition to existing dependencies (making this low risk), and I performed some code cleanup along the way.
For lldb-server I've cleaned up the LLVM dependencies down to just the minimum actually required. This is more than lldb-server actually directly references, and I've left a todo in the code to clean that up.
Reviewers: labath, zturner
Subscribers: lldb-commits, danalbert, srhines, ki.stfu, mgorny, jgosnell
Differential Revision: https://reviews.llvm.org/D29333
llvm-svn: 293686
Summary:
This replaces all the uses of the __ANDROID_NDK__ define with __ANDROID__. This
is a preparatory step to remove our custom android toolchain file and rely on
the standard android NDK one instead, which does not provide this define.
Instead I rely, on __ANDROID__, which is set by the compiler.
I haven't yet removed the cmake variable with the same name, as we will need to
do something completely different there -- NDK toolchain defines
CMAKE_SYSTEM_NAME to Android, while our current one pretends it's linux.
Reviewers: tberghammer, zturner
Subscribers: danalbert, srhines, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D27305
llvm-svn: 288494
This is forcing to use Error::success(), which is in a wide majority
of cases a lot more readable.
Differential Revision: https://reviews.llvm.org/D26481
llvm-svn: 286561
This can happen if you debug an iOS corefile on
a mac, where PlatformPOSIX::GetHostname ends up
not providing a hostname because we're working
with a platform of remote-ios.
llvm-svn: 284799
This updates getters and setters to use StringRef instead of
const char *. I tested the build on Linux, Windows, and OSX
and saw no build or test failures. I cannot test any BSD
or Android variants, however I expect the required changes
to be minimal or non-existant.
llvm-svn: 282079
The class is only used in the debugserver. The rest of lldb has the StringExtractor class.
Xcode project will need to be updated after this.
llvm-svn: 281226
Summary:
This adds the jModulesInfo packet, which is the equivalent of qModulesInfo, but it enables us to
query multiple modules at once. This makes a significant speed improvement in case the
application has many (over a hundred) modules, and the communication link has a non-negligible
latency. This functionality is accessed by ProcessGdbRemote::PrefetchModuleSpecs(), which does
the caching. GetModuleSpecs() is modified to first consult the cache before asking the remote
stub. PrefetchModuleSpecs is currently only called from POSIX-DYLD dynamic loader plugin, after
it reads the list of modules from the inferior memory, but other uses are possible.
This decreases the attach time to an android application by about 40%.
Reviewers: clayborg
Subscribers: tberghammer, lldb-commits, danalbert
Differential Revision: https://reviews.llvm.org/D24236
llvm-svn: 280919
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
The rewrite of StringExtractor::GetHexMaxU32 changes functionality in a way which makes
lldb-server crash. The crash (assert) happens when parsing the "qRegisterInfo0" packet, because
the function tries to drop_front more bytes than the packet contains. It's not clear to me
whether we should consider this a bug in the caller or the callee, but it any case, it worked
before, so I am reverting this until we can figure out what the proper interface should be.
llvm-svn: 280207
Makes Peek() return a StringRef instead of a const char*.
This leads to a few callers of Peek() being able to be made a
little nicer (for example using StringRef member functions instead
of c-style strncmp and related functions) and generally safer
usage.
llvm-svn: 280139
LLDB was rolling its own endian conversion code, but functions to
do this already exist in LLVM. While the code was probably
correct, no point reinventing the wheel when we have well tested
equivalents in LLVM that are one-liners.
llvm-svn: 280137
MutableArrayRef<T> is essentially a safer version of passing around
(T*, length) pairs and provides some convenient functions for working
with the data without having to manually manipulate indices.
This is a minor NFC.
llvm-svn: 280123
StringExtractor::GetNameColonValue() looks for a substring of the
form "<name>:<value>" and returns <name> and <value> to the caller.
This results in two unnecessary string copies, since the name and
value are not translated in any way and simply returned as-is.
By converting this to return StringRefs we can get rid of hundreds
of string copies.
llvm-svn: 280000
I have some improvements to make to StringExtractor that require
using LLVM. debugserver can't take a dependency on LLVM but uses
this file, so I'm forking it off into StdStringExtractor and
StringExtractor, so that StringExtractor can take advantage of
some performance improvements and readability improvements that
LLVM can provide.
llvm-svn: 279997
FD_SETSIZE on windows limits the number of file descriptors, rather than their individual
magnitude (the underlying implementation uses an array rather than a bitset). This meant that the
assert in the SelectHelper was incorrect, and failing all the time. Fix that.
I am not sure whether this should be #ifdef MSVC, or #ifdef WINDOWS, but my feeling is that a
more posix-conforming implementation on windows would choose the bitset implementation, so I'm
sticking with the former.
llvm-svn: 278500
It's always hard to remember when to include this file, and
when you do include it it's hard to remember what preprocessor
check it needs to be behind, and then you further have to remember
whether it's windows.h or win32.h which you need to include.
This patch changes the name to PosixApi.h, which is more appropriately
named, and makes it independent of any preprocessor setting.
There's still the issue of people not knowing when to include this,
because there's not a well-defined set of things it exposes other
than "whatever is missing on Windows", but at least this should
make it less painful to fix when problems arise.
This patch depends on LLVM revision r278170.
llvm-svn: 278177
Resumbitting the commit after fixing the following problems:
- broken unit tests on windows: incorrect gtest usage on my part (TEST vs. TEST_F)
- the new code did not correctly handle the case where we went to interrupt the process, but it
stopped due to a different reason - the interrupt request would remain queued and would
interfere with the following "continue". I also added a unit test for this case.
This reapplies r277156 and r277139.
llvm-svn: 278118
It only contained a reimplementation of std::to_string, which I have replaced with usages of
pre-existing llvm::to_string (also, injecting members into the std namespace is evil).
llvm-svn: 278000
This reverts commit r277139, because:
- broken unittest on windows (likely typo on my part)
- seems to break TestCallThatRestart (needs investigation)
llvm-svn: 277154
SendContinuePacketAndWaitForResponse was huge function with very complex interactions with
several other functions (SendAsyncSignal, SendInterrupt, SendPacket). This meant that making any
changes to how packet sending functions and threads interact was very difficult and error-prone.
This change does not add any functionality yet, it merely paves the way for future changes. In a
follow-up, I plan to add the ability to have multiple query packets in flight (i.e.,
request,request,response,response instead of the usual request,response sequences) and use that
to speed up qModuleInfo packet processing.
Here, I introduce two special kinds of locks: ContinueLock, which is used by the continue thread,
and Lock, which is used by everyone else. ContinueLock (atomically) sends a continue packet, and
blocks any other async threads from accessing the connection. Other threads create an instance of
the Lock object when they want to access the connection. This object, while in scope prevents the
continue from being send. Optionally, it can also interrupt the process to gain access to the
connection for async processing.
Most of the syncrhonization logic is encapsulated within these two classes. Some of it still
had to bleed over into the SendContinuePacketAndWaitForResponse, but the function is still much
more manageable than before -- partly because of most of the work is done in the ContinueLock
class, and partly because I have factored out a lot of the packet processing code separate
functions (this also makes the functionality more easily testable). Most importantly, there is
none of syncrhonization code in the async thread users -- as far as they are concerned, they just
need to declare a Lock object, and they are good to go (SendPacketAndWaitForResponse is now a
very thin wrapper around the NoLock version of the function, whereas previously it had over 100
lines of synchronization code). This will make my follow up changes there easy.
I have written a number of unit tests for the new code and I have ran the test suite on linux and
osx with no regressions.
Subscribers: tberghammer
Differential Revision: https://reviews.llvm.org/D22629
llvm-svn: 277139
Summary:
The StringExtractor functions using stroull will already
skip leading whitespace (ie GetU64). Make sure that the manual
hex parsing functions also skip leading whitespace.
This is important for members of the gdb protocol which are defined
as using whitespace separators (ie qfThreadInfo, qC, etc). While
lldb-server does not use the whitespace separators, gdb-remotes
should work if they do, as the whitespace is defined by the gdb-remote
protocol.
Reviewers: vharron, jasonmolenda, clayborg
Subscribers: sas, lldb-commits
Differential Revision: http://reviews.llvm.org/D20509
llvm-svn: 270592
This is a pretty straightforward first pass over removing a number of uses of
Mutex in favor of std::mutex or std::recursive_mutex. The problem is that there
are interfaces which take Mutex::Locker & to lock internal locks. This patch
cleans up most of the easy cases. The only non-trivial change is in
CommandObjectTarget.cpp where a Mutex::Locker was split into two.
llvm-svn: 269877
Summary:
Doing a pthread_detach while the thread is exiting can cause crashes or other mischief, so we
make sure the thread stays around long enough. The performance impact of the added
synchronization should be minimal, as the parent thread is already holding a mutex, so I am just
making sure it holds it for a little while longer. It's possible the new thread will block on
this mutex immediately after startup, but it should be unblocked really quickly and some
blocking is unavoidable if we actually want to have this synchronization.
Reviewers: tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D19153
llvm-svn: 266423
rnb_err_t
RNBRemote::HandlePacket_stop_process (const char *p)
{
if (!DNBProcessInterrupt(m_ctx.ProcessID()))
HandlePacket_last_signal (NULL);
return rnb_success;
}
In the call to DNBProcessInterrupt we did:
nub_bool_t
DNBProcessInterrupt(nub_process_t pid)
{
MachProcessSP procSP;
if (GetProcessSP (pid, procSP))
return procSP->Interrupt();
return false;
}
This would always return false. It would cause HandlePacket_stop_process to always call "HandlePacket_last_signal (NULL);" which would send an extra stop reply packet _if_ the process is stopped. On a machine with enough cores, it would call DNBProcessInterrupt(...) and then HandlePacket_last_signal(NULL) so quickly that it will never send out an extra stop reply packet. But if the machine is slow enough or doesn't have enough cores, it could cause the call to HandlePacket_last_signal() to actually succeed and send an extra stop reply packet. This would cause problems up in GDBRemoteCommunicationClient::SendContinuePacketAndWaitForResponse() where it would get the first stop reply packet and then possibly return or execute an async packet. If it returned, then the next packet that was sent will get the second stop reply as its response. If it executes an async packet, the async packet will get the wrong response.
To fix this I did the following:
1 - in debugserver, I fixed "bool MachProcess::Interrupt()" to return true if it sends the signal so we avoid sending the stop reply twice on slower machines
2 - Added a log line to RNBRemote::HandlePacket_stop_process() to say if we ever send an extra stop reply so we will see this in the darwin console output if this does happen
3 - Added response validators to StringExtractorGDBRemote so that we can verify some responses to some packets.
4 - Added validators to packets that often follow stop reply packets like the "m" packet for memory reads, JSON packets since "jThreadsInfo" is often sent immediately following a stop reply.
5 - Modified GDBRemoteCommunicationClient::SendPacketAndWaitForResponseNoLock() to validate responses. Any "StringExtractorGDBRemote &response" that contains a valid response verifier will verify the response and keep looking for correct responses up to 3 times. This will help us get back on track if we do get extra stop replies. If a StringExtractorGDBRemote does not have a response validator, it will accept any packet in response.
6 - In GDBRemoteCommunicationClient::SendPacketAndWaitForResponse we copy the response validator from the "response" argument over into m_async_response so that if we send the packet by interrupting the running process, we can validate the response we actually get in GDBRemoteCommunicationClient::SendContinuePacketAndWaitForResponse()
7 - Modified GDBRemoteCommunicationClient::SendContinuePacketAndWaitForResponse() to always check for an extra stop reply packet for 100ms when the process is interrupted. We were already doing this because we might interrupt a process with a \x03 packet, yet the process was in the process of stopping due to another reason. This race condition could cause an extra stop reply packet because the GDB remote protocol says if a \x03 packet is sent while the process is stopped, we should send a stop reply packet back. Now we always check for an extra stop reply packet when we manually interrupt a process.
The issue was showing up when our IDE would attempt to set a breakpoint while the process is running and this would happen:
--> \x03
<-- $T<stop reply 1>
--> z0,AAAAA,BB (set breakpoint)
<-- $T<stop reply 1> (incorrect extra stop reply packet)
--> c
<-- OK (response from z0 packet)
Now all packet traffic was off by one response. Since we now have a validator on the response for "z" packets, we do this:
--> \x03
<-- $T<stop reply 1>
--> z0,AAAAA,BB (set breakpoint)
<-- $T<stop reply 1> (Ignore this because this can't be the response to z0 packets)
<-- OK -- (we are back on track as this is a valid response to z0)
...
As time goes on we should add more packet validators.
<rdar://problem/22859505>
llvm-svn: 265086
Most address represented in lldb as section plus offset and handling of
absolute addresses is problematic in several location because of lack
of necessary information (e.g. Target) or because of performance issues.
This CL change the way ObjectFileELF handle the absolute symbols with
creating a pseudo section for each symbol. With this change all existing
code designed to work with addresses in the form of section plus offset
will work with absolute symbols as well.
Differential revision: http://reviews.llvm.org/D17450
llvm-svn: 261859
Summary:
DWARF 5 proposes a reinvented .debug_macro section. This change follows
that spec.
Currently, only GCC produces the .debug_macro section and hence
the added test is annottated with expectedFailureClang.
Reviewers: spyffe, clayborg, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D15437
llvm-svn: 255729
Adding the modules to the global module list eleminate issues in the
case when a module is unloaded from the target but some object (e.g.
breakpoint) still referencing them with weak pointers. It also speeds
up the case when we load, unload, load the same shared library because
the global module cache will keep the parsed debug info around between
the 2 load (this scenario happens for some code on android).
Differential revision: http://reviews.llvm.org/D15415
llvm-svn: 255260
The standard remote debugging workflow with gdb is to start the
application on the remote host under gdbserver (e.g.: gdbserver :5039
a.out) and then connect to it with gdb.
The same workflow is supported by debugserver/lldb-gdbserver with a very
similar syntax but to access all features of lldb we need to be
connected also to an lldb-platform instance running on the target.
Before this change this had to be done manually with starting a separate
lldb-platform on the target machine and then connecting to it with lldb
before connecting to the process.
This change modifies the behavior of "platform connect" with
automatically connecting to the process instance if it was started by
the remote platform. With this command replacing gdbserver in a gdb
based worflow is usually as simple as replacing the command to execute
gdbserver with executing lldb-platform.
Differential revision: http://reviews.llvm.org/D14952
llvm-svn: 255016
* Add support for representing signed integers
* Add new constructors taking any signed or unsigned integer types
Differential revision: http://reviews.llvm.org/D15187
llvm-svn: 254715
The purpose of the class is to make it easy to execute tasks in parallel
Basic design goals:
* Have a very lightweight and easy to use interface where a list of
lambdas can be executed in parallel
* Use a global thread pool to limit the number of threads used
(std::async don't do it on Linux) and to eliminate the thread creation
overhead
* Destroy the thread currently not in use to avoid the confusion caused
by them during debugging LLDB
Possible future improvements:
* Possibility to cancel already added, but not yet started tasks
* Parallel for_each implementation
* Optimizations in the thread creation destroyation code
Differential revision: http://reviews.llvm.org/D13727
llvm-svn: 250820
Summary:
This commit adds support for binary memory reads ($x) to lldb-server. It also removes the "0x"
prefix from the $x client packet, to make it more compatible with the old $m packet. This allows
us to use almost the same code for handling both packet types. I have verified that debugserver
correctly handles $x packets even without the leading "0x". I have added a test which verifies
that the stub returns the same memory contents for both kinds of memory reads ($x and $m).
Reviewers: tberghammer, jasonmolenda
Subscribers: iancottrell, lldb-commits
Differential Revision: http://reviews.llvm.org/D13695
llvm-svn: 250295
.ARM.exidx/.ARM.extab sections contain unwind information used on ARM
architecture from unwinding from an exception.
Differential revision: http://reviews.llvm.org/D13245
llvm-svn: 248903
Character with ASCII code 0 is incorrectly treated by LLDB as the end of
RSP packet. The left of the debugger server output is silently ignored.
Patch from evgeny.leviant@gmail.com
Reviewed by: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12523
llvm-svn: 247908
The Go runtime schedules user level threads (goroutines) across real threads.
This adds an OS plugin to create memory threads for goroutines.
It supports the 1.4 and 1.5 go runtime.
Differential Revision: http://reviews.llvm.org/D5871
llvm-svn: 247852
"gcc" register numbers are now correctly referred to as "ehframe"
register numbers. In almost all cases, ehframe and dwarf register
numbers are identical (the one exception is i386 darwin where ehframe
regnums were incorrect).
The old "gdb" register numbers, which I incorrectly thought were
stabs register numbers, are now referred to as "Process Plugin"
register numbers. This is the register numbering scheme that the
remote process controller stub (lldb-server, gdbserver, core file
support, kdp server, remote jtag devices, etc) uses to refer to the
registers. The process plugin register numbers may not be contiguous
- there are remote jtag devices that have gaps in their register
numbering schemes.
I removed all of the enums for "gdb" register numbers that we had
in lldb - these were meaningless - and I put LLDB_INVALID_REGNUM
in all of the register tables for the Process Plugin regnum slot.
This change is almost entirely mechnical; the one actual change in
here is to ProcessGDBRemote.cpp's ParseRegisters() which parses the
qXfer:features:read:target.xml response. As it parses register
definitions from the xml, it will assign sequential numbers as the
eRegisterKindLLDB numbers (the lldb register numberings must be
sequential, without any gaps) and if the xml file specifies register
numbers, those will be used as the eRegisterKindProcessPlugin
register numbers (and those may have gaps). A J-Link jtag device's
target.xml does contain a gap in register numbers, and it only
specifies the register numbers for the registers after that gap.
The device supports many different ARM boards and probably selects
different part of its register file as appropriate.
http://reviews.llvm.org/D12791
<rdar://problem/22623262>
llvm-svn: 247741
Summary:
This doesn't exist in other LLVM projects any longer and doesn't
do anything.
Reviewers: chaoren, labath
Subscribers: emaste, tberghammer, lldb-commits, danalbert
Differential Revision: http://reviews.llvm.org/D12586
llvm-svn: 246749
Summary:
When calling find_first_of and find_last_of on a single character,
we can instead just call find / rfind and make our intent more
clear.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12518
llvm-svn: 246609
These are 2 new value currently in experimental status used when split
debug info is enabled.
Differential revision: http://reviews.llvm.org/D12238
llvm-svn: 245931
for eh_frame and stabs register numberings. This is not
complete but it's a step in the right direction. It's almost
entirely mechanical.
lldb informally uses "gcc register numbering" to mean eh_frame.
Why? Probably because there's a notorious bug with gcc on i386
darwin where the register numbers in eh_frame were incorrect.
In all other cases, eh_frame register numbering is identical to
dwarf.
lldb informally uses "gdb register numbering" to mean stabs.
There are no official definitions of stabs register numbers
for different architectures, so the implementations of gdb
and gcc are the de facto reference source.
There were some incorrect uses of these register number types
in lldb already. I fixed the ones that I saw as I made
this change.
This commit changes all references to "gcc" and "gdb" register
numbers in lldb to "eh_frame" and "stabs" to make it clear
what is actually being represented.
lldb cannot parse the stabs debug format, and given that no
one is using stabs any more, it is unlikely that it ever will.
A more comprehensive cleanup would remove the stabs register
numbers altogether - it's unnecessary cruft / complication to
all of our register structures.
In ProcessGDBRemote, when we get register definitions from
the gdb-remote stub, we expect to see "gcc:" (qRegisterInfo)
or "gcc_regnum" (qXfer:features:read: packet to get xml payload).
This patch changes ProcessGDBRemote to also accept "ehframe:"
and "ehframe_regnum" from these remotes.
I did not change GDBRemoteCommunicationServerLLGS or debugserver
to send these new packets. I don't know what kind of interoperability
constraints we might be working under. At some point in the future
we should transition to using the more descriptive names.
Throughout lldb we're still using enum names like "gcc_r0" and "gdb_r0",
for eh_frame and stabs register numberings. These should be cleaned
up eventually too.
The sources link cleanly on macosx native with xcode build. I
don't think we'll see problems on other platforms but please let
me know if I broke anyone.
llvm-svn: 245141
On android .oat files (compiled java code) don't have symbol
information but on SDK 23+ it can be generated by the oatdump tool
(based on the dex information).
This CL adds logic to download this information and store it in the
module cache.
Differential revision: http://reviews.llvm.org/D11936
llvm-svn: 244738
Summary:
This commit adds initial support for the jThreadsInfo packet to lldb-server. The current
implementation does not expedite inferior memory. I have also added a description of the new
packet to our protocol documentation (mostly taken from Greg's earlier commit message).
Reviewers: clayborg, ovyalov, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11187
llvm-svn: 242402
Summary:
- Consolidate Unix signals selection in UnixSignals.
- Make Unix signals available from platform.
- Add jSignalsInfo packet to retrieve Unix signals from remote platform.
- Get a copy of the platform signal for each remote process.
- Update SB API for signals.
- Update signal utility in test suite.
Reviewers: ovyalov, clayborg
Subscribers: chaoren, jingham, labath, emaste, tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11094
llvm-svn: 242101
Change over existing code to use this new parser so StructuredData can use the tokenizer to parse JSON instead of doing it manually.
This allowed us to easily parse JSON into JSON* objects as well as into StructuredData.
llvm-svn: 241522
Summary:
This should solve the issue of sending denormalized paths over gdb-remote
if we stick to GetPath(false) in GDBRemoteCommunicationClient, and let the
server handle any denormalization.
Reviewers: ovyalov, zturner, vharron, clayborg
Reviewed By: clayborg
Subscribers: tberghammer, emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D9728
llvm-svn: 238604
Summary:
This patch is the beginnings of support for Non-stop mode in the remote protocol. Letting a user examine stopped threads, while other threads execute freely.
Non-stop mode is enabled using the setting target.non-stop-mode, which sends a QNonStop packet when establishing the remote connection.
Changes are also made to treat the '?' stop reply packet differently in non-stop mode, according to spec https://sourceware.org/gdb/current/onlinedocs/gdb/Remote-Non_002dStop.html#Remote-Non_002dStop.
A setting for querying the remote for default thread on setup is also included.
Handling of '%' async notification packets will be added next.
Reviewers: clayborg
Subscribers: lldb-commits, ADodds, ted, deepak2427
Differential Revision: http://reviews.llvm.org/D9656
llvm-svn: 237239
Summary:
This changes lldb_assert to accept bool expressions as the parameter, this is because some
objects (such as std::shared_ptr) are convertible to bool, but are not convertible to int, which
leads to surprising errors.
Reviewers: granata.enrico, zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9565
llvm-svn: 236819
There were a couple of real bugs here regarding error checking and
signed/unsigned comparisons, but mostly these were just noise.
There was one class of bugs fixed here which is particularly
annoying, dealing with MSVC's non-standard behavior regarding
the underlying type of enums. See the comment in
lldb-enumerations.h for details. In short, from now on please use
FLAGS_ENUM and FLAGS_ANONYMOUS_ENUM when defining enums which
contain values larger than can fit into a signed integer.
llvm-svn: 233943
Specifically, there were some functions for converting enums
to strings and a function for matching a string using a specific
matching algorithm. This moves those functions to more appropriate
headers in lldb/Utility and updates references to include the
new headers.
llvm-svn: 232673
This removes Host::Backtrace from the codebase, and changes all
call sites to use llvm::sys::PrintStackTrace(). This makes the
functionality available for all platforms, and even for platforms
which currently had a supported implementation of Host::Backtrace,
this patch should enable richer information in stack traces, such
as file and line number information, as well as giving it the
ability to unwind through inlined functions.
llvm-svn: 231511
We would like it if LLDB never crashed, especially if we never caused LLDB to crash
On the other hand, having assertions can sometimes be useful
lldbassert(x) is the best of both worlds:
- in debug builds, it turns into a regular assert, which is fine because we don't mind debug LLDB to crash on development machines
- in non-debug builds, it emits a message formatted just like assert(x) would, but then instead of crashing, it dumps a backtrace, suggests filing a bug, and keeps running
llvm-svn: 231310
Earlier this week I was able to get clang-cl on Windows to be
able to self host. This opened the door to being able to
get a whole new slew of warnings for the Windows build.
This patch fixes all of the warnings, many of which were real
bugs.
llvm-svn: 230522
Following changes are done.
Add missing headers.
Replace _snprintf with snprintf. It is already changed to _snprintf for MSVC.
Add a file in the build for autoconf.
Call DynamicLoaderWindows::Terminate and DynamicLoaderWindows::Initialize only for MSVC build.
Reviewed in http://reviews.llvm.org/D7536.
llvm-svn: 228822
Summary:
When debugging two targets concurrently, the pseude terminal master fd from the first one would
leak into the second. This fixes the problem by setting O_CLOEXEC on the master fd. Test
included.
Reviewers: clayborg, vharron
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7466
llvm-svn: 228570
Processes running on a remote target can already send $O messages
to send stdout but there is no way to send stdin to a remote
inferior.
This allows processes using the API to pump stdin into a remote
inferior process.
It fixes a hang in TestProcessIO.py when running against a remote
target.
llvm-svn: 228419
which will verify if the eh_frame instructions include details about
the prologue or not. Both clang and gcc include prologue instructions
but there's no requirement for them to do so -- and I'm sure we'll
have to interoperate with a compiler that doesn't generate prologue
info at some point.
I don't have any compilers that omit the prologue instructions so the
testing was of the "makre sure augmented unwind info is still created".
With an eh_frame without prologue, this code should reject the
augmentation scheme altogether and we should fall back to using assembly
instruction profiling.
llvm-svn: 225771
it more generally available.
Add checks to UnwindAssembly_x86::AugmentUnwindPlanFromCallSite() so
that it won't try to augment an UnwindPlan that already describes
the function epilogue.
Add a test case for backtracing out of _sigtramp on Darwin systems.
This could probably be adapted to test the same thing on linux/bsd but
the function names of sigtramp and kill are probably platform
specific and I'm not sure what they should be.
llvm-svn: 225578
DecodeHexU8 returns a decoded hex character pair, returns -1 if a
valid hex pair is not available.
GetHexBytesAvail decodes all available hex pairs.
llvm-svn: 223081
out we only want to roll back text that was in the
buffer to begin with, so it's not necessary to
provide a pushback stack.
I'm going to use this slightly cleaner API to perform
lookahead for the Objective-C runtime type parser.
llvm-svn: 221640
PseudoTerminal.cpp uses a dummy implementation of posix_openpt for Windows. This
implementation just returns 0. So m_master_fd is 0. But destructor calls 'close'
on m_master_fd. This 'close' calls seems un-necessary as m_master_fd was never
opened in first place and calling 'close' on 0 can have other un-intended
consequences.
I am committing it as obvious as it is only a one-liner. Long term, we may want
to refactor this class.
llvm-svn: 220705
The issue was GDBRemoteCommunication::CheckForPacket() already fixes up any prefixed bytes (0x7d followed by value that is XOR'ed with 0x20). If we do this again, we cause binary packets to lose bytes.
This allows lldb-platform to be able to upload binaries and debug them remotely.
llvm-svn: 218002
Yet another step toward ARM64 support. With this commit, lldb-gdbserver started on ARM64 target can be accessed by lldb running on desktop PC and it can process simple commands (like 'continue'). Still ARM64 support lacks NativeRegisterContextLinux_arm64.* code which waits to be implemented.
Based on similar files for Linux x86_64 and Darwin ARM64. Due to common code extraction from Darwin related files, lldb should be tested for any unexpected regression on Darwin ARM64 machines too.
See the following for more details:
http://reviews.llvm.org/D4580http://lists.cs.uiuc.edu/pipermail/lldb-commits/Week-of-Mon-20140825/012670.html
Change by Paul Osmialowski.
llvm-svn: 216737
Pavel Labath