For this relocation, which applies to two consecutive instructions,
it's plausible that the second instruction might not actually be
the right one.
Differential Revision: https://reviews.llvm.org/D50998
llvm-svn: 340715
This is a pretty large refactor / re-write of the Microsoft
demangler. The previous one was a little hackish because it
evolved as I was learning about all the various edge cases,
exceptions, etc. It didn't have a proper AST and so there was
lots of custom handling of things that should have been much
more clean.
Taking what was learned from that experience, it's now
re-written with a completely redesigned and much more sensible
AST. It's probably still not perfect, but at least it's
comprehensible now to someone else who wants to come along
and make some modifications or read the code.
Incidentally, this fixed a couple of bugs, so I've enabled
the tests which now pass.
llvm-svn: 340710
Summary: This was inheriting the cost from the AVX table, but should be legal under AVX512.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51267
llvm-svn: 340708
Summary:
Previously most CPUs inherited cmov support through Feature64Bit(or FeatureCMPXCHG16HB implying Feature64Bit) or FeatureSSE1.
This has the surprising side effect that -mattr=-cmov causes an assert to fire in 64-bit mode because it clears the Feature64Bit. Or in 32-bit mode, -mattr=-cmov disables any sse/avx features which seems surprising.
This patch removes the implication and instead updates hasCMOV in X86Subtarget to check SSE1 or is64Bit in addition to the regular cmov flag. This should keep most things working the way they did before. I don't believe there is a way to specific "-cmov" directly from clang so this should only effect our lower level tools.
This does stop -mattr=cx16(cmpxchg16b) from implying cmov is enabled via the 64bit flag as you can see from one of the changed tests. But that was a 32-bit test so I don't know why it enabled cx16 anyway.
For the other test I had to add -sse to override the new sse check in hasCMOV.
Reviewers: RKSimon, DavidKreitzer, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits, jfb
Differential Revision: https://reviews.llvm.org/D51228
llvm-svn: 340707
Summary: This matches gcc and one cpuid dump I found online. Given that these are considered 7th generation x86 CPU it seems likely they support cmov since cmov was added by Intel in their 6th generation.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51264
llvm-svn: 340706
I noticed this along with the patterns in D51125, but when the index is variable,
we don't convert insertelement into a build_vector.
For x86, that means these get expanded at legalization time into the loading/spilling
code that we see in the tests. I think it's always better to avoid going to memory on
these, and we get the optimal 'broadcast' if it's available.
I suspect other targets may want to look at enabling the hook. AArch64 and AMDGPU have
regression tests that would be affected (although I did not check what would happen in
those cases). In the most basic cases shown here, AArch64 would probably do much
better with a splat.
Differential Revision: https://reviews.llvm.org/D51186
llvm-svn: 340705
Private symbols are not visible outside the object file, and so not defined by
the object file from ORC's perspective.
No test case yet. Ideally this would be a unit test parsing a checked-in binary,
but I am not aware of any way to reference the LLVM source root from a unit
test.
llvm-svn: 340703
vectors, and move this test code into an anonymous namespace.
Hoping that this will avoid hitting an MSVC bug that causes it to crash
and burn pretty spectacularly. Also, this degree of clever use of
initializer lists seems somewhat questionable in general. ;]
llvm-svn: 340702
This is a bit awkward in a handful of places where we didn't even have
an instruction and now we have to see if we can build one. But on the
whole, this seems like a win and at worst a reasonable cost for removing
`TerminatorInst`.
All of this is part of the removal of `TerminatorInst` from the
`Instruction` type hierarchy.
llvm-svn: 340701
agree with MSVC.
There isn't actually a need for specialization here as we can write the
code generically and just have a test that will fold away as a constant.
llvm-svn: 340700
`isExceptionalTermiantor` and implement it for opcodes as well following
the common pattern in `Instruction`.
Part of removing `TerminatorInst` from the `Instruction` type hierarchy
to make it easier to share logic and interfaces between instructions
that are both terminators and not terminators.
llvm-svn: 340699
The core get and set routines move to the `Instruction` class. These
routines are only valid to call on instructions which are terminators.
The iterator and *generic* range based access move to `CFG.h` where all
the other generic successor and predecessor access lives. While moving
the iterator here, simplify it using the iterator utilities LLVM
provides and updates coding style as much as reasonable. The APIs remain
pointer-heavy when they could better use references, and retain the odd
behavior of `operator*` and `operator->` that is common in LLVM
iterators. Adjusting this API, if desired, should be a follow-up step.
Non-generic range iteration is added for the two instructions where
there is an especially easy mechanism and where there was code
attempting to use the range accessor from a specific subclass:
`indirectbr` and `br`. In both cases, the successors are contiguous
operands and can be easily iterated via the operand list.
This is the first major patch in removing the `TerminatorInst` type from
the IR's instruction type hierarchy. This change was discussed in an RFC
here and was pretty clearly positive:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123407.html
There will be a series of much more mechanical changes following this
one to complete this move.
Differential Revision: https://reviews.llvm.org/D47467
llvm-svn: 340698
Legalize G_ADD for types smaller than i32.
LegalizationArtifactCombiner replaces extend instructions with appropriate
bitwise instructions.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D51213
llvm-svn: 340697
Summary: NameLen wasn't being used and caused the parameters in gdb to very long, in my case, crashes in others. Please also perform the correct magical incarnations to have this be applied to the LLVM 7 branch.
Reviewers: whitequark, CodaFi
Reviewed By: CodaFi
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51141
llvm-svn: 340691
Summary:
The only time vector SMUL_LOHI/UMUL_LOHI nodes are created is during division/remainder lowering. If its created before op legalization, generic DAGCombine immediately turns that SMUL_LOHI/UMUL_LOHI into a MULHS/MULHU since only the upper half is used. That node will stick around through vector op legalization and will be turned back into UMUL_LOHI/SMUL_LOHI during op legalization. It will then be custom lowered by the X86 backend. Due to this two step lowering the vector shuffles created by the custom lowering get legalized after their inputs rather than before. This prevents the shuffles from being combined with any build_vector of constants.
This patch uses changes vXi32 to use MULHS/MULHU instead. This is what the later DAG combine did anyway. But by skipping the change back to UMUL_LOHI/SMUL_LOHI we lower it before any constant BUILD_VECTORS. This allows the vector_shuffle creation to constant fold with the build_vectors. This accounts for the test changes here.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51254
llvm-svn: 340690
Summary:
Previously the value being stored is the last operand in SDNode. This causes the type legalizer to visit the mask operand before the value operand. The type legalizer was more complicated because of this since we want the type of the value to drive the decisions.
This patch moves the value to be the first operand so we visit it first during type legalization. It also simplifies the type legalization code accordingly.
X86 is currently the only in tree target that uses this SDNode. Not sure if there are any users out of tree.
Reviewers: RKSimon, delena, hfinkel, eli.friedman
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D50402
llvm-svn: 340689
This is a preliminary step for a preliminary step for D50992.
I noticed that x86 often misses chances to load a scalar directly
into a vector register.
So this patch is just allowing more of those cases to match a
broadcast op in lowerBuildVectorAsBroadcast(). The old code comment
said it doesn't make sense to use a broadcast when we're loading a
single element and everything else is undef, but I think that's the
best case in the improved tests in insert-loaded-scalar.ll. We avoid
scalar-to-vector-register move and/or less efficient shuffling.
Note that there are some existing types that were already producing
a broadcast, but that happens semi-accidentally. Ie, it's not
happening as part of lowerBuildVectorAsBroadcast(). The build vector
gets expanded into load + shuffle, and then shuffle lowering produces
the broadcast.
Description of the other test diffs:
1. avx-basic.ll - replacing load+shufle is a win.
2. sse3-avx-addsub-2.ll - vmovddup vs. vbroadcastss is neutral
3. sse41.ll - don't care - we convert that intrinsic to generic IR now, so this test is deprecated
4. vector-shuffle-128-v8.ll / vector-shuffle-256-v16.ll - pshufb alternatives with an extra instruction are not obviously bad
Differential Revision: https://reviews.llvm.org/D51125
llvm-svn: 340685
Summary:
Patch by Marek Olsak and David Stuttard, both of AMD.
This adds a new amdgcn intrinsic supporting s.buffer.load, in particular
multiple dword variants. These are convenient to use from some front-end
implementations.
Also modified the existing llvm.SI.load.const intrinsic to common up the
underlying implementation.
This modification also requires that we can lower to non-uniform loads correctly
by splitting larger dword variants into sizes supported by the non-uniform
versions of the load.
V2: Addressed minor review comments.
V3: i1 glc is now i32 cachepolicy for consistency with buffer and
tbuffer intrinsics, plus fixed formatting issue.
V4: Added glc test.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D51098
Change-Id: I83a6e00681158bb243591a94a51c7baa445f169b
llvm-svn: 340684
When compiling CUDA or OpenMP device code Clang parses header files
that expect certain predefined macros from the host architecture. To
make this work the compiler passes the host triple via the -aux-triple
argument and (until now) pulls in all macros for that "auxiliary triple"
unconditionally.
However this results in defines like __SSE_MATH__ that will trigger
inline assembly making use of the "advertised" target features. See
the discussion of D47849 and PR38464 for a detailed explanation of
the encountered problems.
Instead of blacklisting "known bad" examples this patch starts adding
defines that are needed for certain headers like bits/wordsize.h and
bits/mathinline.h.
The disadvantage of this approach is that it decouples the definitions
from their target toolchain. However in my opinion it's more important
to keep definitions for one header close together. For one this will
include a clear documentation why these particular defines are needed.
Furthermore it simplifies maintenance because adding defines for a new
header or support for a new aux-triple only needs to touch one piece
of code.
Differential Revision: https://reviews.llvm.org/D50845
llvm-svn: 340681
Summary:
If any of the bundled instructions are marked as FrameSetup
or FrameDestroy, then that property is set on the BUNDLE
instruction as well.
As long as the scheduler/packetizer aren't mixing
prologue/epilogue instructions (i.e. all the bundled
instructions have the same property) then this simply gives
the bundle the correct property (so when using a bundle
iterator in late passes a bundle will be correctly identified
as FrameSetup/FrameDestroy).
When for example bundling a mix of FrameSetup instructions
with non-FrameSetup instructions it could be discussed if
the bundle should have the property or not. The choice here
has been to set these properties on the BUNDLE instruction if
any of the bundled instructions have the property set.
Reviewers: #debug-info, kparzysz
Reviewed By: kparzysz
Subscribers: vsk, thegameg, llvm-commits
Differential Revision: https://reviews.llvm.org/D50637
llvm-svn: 340680
Summary:
When computeIntervals is looking through COPY instruction to
extend the location mapping for a debug variable it did not
handle subregisters correctly.
For example
DBG_VALUE debug-use %0.sub_8bit_hi, ...
%1:gr16 = COPY %0
was transformed into
DBG_VALUE debug-use %0.sub_8bit_hi, ...
%1:gr16 = COPY %0
DBG_VALUE debug-use %1, ...
So the subregister index was missing in the added DBG_VALUE.
As long as the subreg refered to the least significant bits
of the superreg, then I guess we could get the correct
result in a debugger even when referring to the superreg.
But as in the example above when the subreg refers to other
parts of the superreg, then debuginfo would be incorrect.
I'm not sure exactly how to fix this properly, so this patch
just avoids looking through the COPY when there is a subreg
involved (for more info, see the FIXME added in the code).
Reviewers: rnk, aprantl
Reviewed By: aprantl
Subscribers: JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D50788
llvm-svn: 340679
Summary:
Handle the case IDVal is an empty string.
This bug was uncovered by a LLVM MC Assembler Protocol Buffer
Fuzzer for the RISC-V assembly language.
Reviewers: rnk
Reviewed By: rnk
Subscribers: rnk, niravd, pcc, peter.smith, asb, grosbach, llvm-commits, bcain, kito-cheng, shiva0217, rogfer01, PkmX
Differential Revision: https://reviews.llvm.org/D50808
llvm-svn: 340678
On macOS, some of the <optional> APIs used by the test are available only
starting on macOS 10.14 when using exceptions. Build the test with
-fno-exceptions so that the test builds on older systems too.
rdar://problem/43700544
llvm-svn: 340676
HermitCore is a POSIX-compatible kernel for running a single application in an isolated environment to get maximum performance and predictable runtime behavior. It can either be used bare-metal on hardware or a VM (Unikernel) or side by side to an existing Linux system (Multikernel).
Due to the latter feature, HermitCore binaries are marked with ELFOSABI_STANDALONE to let the Linux ELF loader distinguish them from regular Unix/Linux binaries and load them using the HermitCore "proxy" tool.
Patch by Colin Finck!
llvm-svn: 340675
The function's new implementation from r340583 had a bug in it that
could cause an invalid scope to be generated when merging two
DILocations with no common ancestor scope.
This patch detects this situation and picks the scope of the first
location. This is not perfect, because the scope is misleading, but on
the other hand, this will be a line 0 location.
rdar://problem/43687474
Differential Revision: https://reviews.llvm.org/D51238
llvm-svn: 340672
r340663 - Allow Allocator::make to make a node of a different type than that
requested.
r340664 - Add documentation comment to ForwardTemplateReference.
r340665 - Fix ExpandedSpecialSubstitution demangling for Sa and Sb.
r340670 - Allow demangler's node allocator to fail, and bail out of the entire
demangling process when it does.
llvm-svn: 340671
demangling process when it does.
Use this to support a "lookup" query for the mangling canonicalizer that
does not create new nodes. This could also be used to implement
demangling with a fixed-size temporary storage buffer.
Reviewers: erik.pilkington
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51003
llvm-svn: 340670
Craig Topper