Commit Graph

18040 Commits

Author SHA1 Message Date
Nadav Rotem 7df850924d Teach InstCombine to optimize extract of a value from a vector add operation with a constant zero.
llvm-svn: 172576
2013-01-15 23:43:14 +00:00
Shuxin Yang e822745202 1. Hoist minus sign as high as possible in an attempt to reveal
some optimization opportunities (in the enclosing supper-expressions).

   rule 1. (-0.0 - X ) * Y => -0.0 - (X * Y)
     if expression "-0.0 - X" has only one reference.

   rule 2. (0.0 - X ) * Y => -0.0 - (X * Y)
     if expression "0.0 - X" has only one reference, and
        the instruction is marked "noSignedZero".

2. Eliminate negation (The compiler was already able to handle these
    opt if the 0.0s are replaced with -0.0.)

   rule 3: (0.0 - X) * (0.0 - Y) => X * Y
   rule 4: (0.0 - X) * C => X * -C
   if the expr is flagged "noSignedZero".

3. 
  Rule 5: (X*Y) * X => (X*X) * Y
   if X!=Y and the expression is flagged with "UnsafeAlgebra".

   The purpose of this transformation is two-fold:
    a) to form a power expression (of X).
    b) potentially shorten the critical path: After transformation, the
       latency of the instruction Y is amortized by the expression of X*X,
       and therefore Y is in a "less critical" position compared to what it
      was before the transformation. 

4. Remove the InstCombine code about simplifiying "X * select".
   
   The reasons are following:
    a) The "select" is somewhat architecture-dependent, therefore the
       higher level optimizers are not able to precisely predict if
       the simplification really yields any performance improvement
       or not.

    b) The "select" operator is bit complicate, and tends to obscure
       optimization opportunities. It is btter to keep it as low as
       possible in expr tree, and let CodeGen to tackle the optimization.

llvm-svn: 172551
2013-01-15 21:09:32 +00:00
Daniel Dunbar c36547d422 [IR] Add verification for module flags with the "require" behavior.
llvm-svn: 172549
2013-01-15 20:52:06 +00:00
Evgeniy Stepanov 701d2b861e [msan] Temporarily remove ICmpEQ tests.
They are failing on the bots.

llvm-svn: 172540
2013-01-15 17:12:04 +00:00
Evgeniy Stepanov d14e47b146 [msan] Fix handling of equality comparison of pointer vectors.
Also improve test coveration of the handling of relational comparisons.

llvm-svn: 172539
2013-01-15 16:44:52 +00:00
Renato Golin 51c25b0818 Pattern-matched variables in post-inc-icmpzero.ll
Test was failing for clang-native-arm-cortex-a9 build-bot configuration.
The reason for the failure was the test was using hardcoded names.
The attached patch fixes this failure by replacing the hard-coded variables
names with pattern-matched variable names.

Patch by Manish Verma, ARM

llvm-svn: 172534
2013-01-15 15:22:45 +00:00
Daniel Dunbar 25c4b5718b [IR] Add verifier support for llvm.module.flags.
- Also, update the LangRef documentation on module flags to match the
   implementation.

llvm-svn: 172498
2013-01-15 01:22:53 +00:00
Jack Carter f238510c43 This patch fixes a Mips specific bug where
we need to generate a N64 compound relocation
R_MIPS_GPREL_32/R_MIPS_64/R_MIPS_NONE.

The bug was exposed by the SingleSourcetest case 
DuffsDevice.c.

Contributer: Jack Carter
llvm-svn: 172496
2013-01-15 01:08:02 +00:00
Shuxin Yang 320f52a4b0 This change is to implement following rules under the condition C_A and/or C_R
---------------------------------------------------------------------------
 C_A: reassociation is allowed
 C_R: reciprocal of a constant C is appropriate, which means 
    - 1/C is exact, or 
    - reciprocal is allowed and 1/C is neither a special value nor a denormal.
 -----------------------------------------------------------------------------

 rule1:  (X/C1) / C2 => X / (C2*C1)  (if C_A)
                     => X * (1/(C2*C1))  (if C_A && C_R)
 rule 2:  X*C1 / C2 => X * (C1/C2)  if C_A
 rule 3: (X/Y)/Z = > X/(Y*Z)  (if C_A && at least one of Y and Z is symbolic value)
 rule 4: Z/(X/Y) = > (Z*Y)/X  (similar to rule3)

 rule 5: C1/(X*C2) => (C1/C2) / X (if C_A)
 rule 6: C1/(X/C2) => (C1*C2) / X (if C_A)
 rule 7: C1/(C2/X) => (C1/C2) * X (if C_A)

llvm-svn: 172488
2013-01-14 22:48:41 +00:00
Chad Rosier 5c118fd2ec [ms-inline asm] Extend support for parsing Intel bracketed memory operands that
have an arbitrary ordering of the base register, index register and displacement.
rdar://12527141

llvm-svn: 172484
2013-01-14 22:31:35 +00:00
Bill Schmidt d006c6938b This patch addresses an incorrect transformation in the DAG combiner.
The included test case is derived from one of the GCC compatibility tests.
The problem arises after the selection DAG has been converted to type-legalized
form.  The combiner first sees a 64-bit load that can be converted into a
pre-increment form.  The original load feeds into a SRL that isolates the
upper 32 bits of the loaded doubleword.  This looks like an opportunity for
DAGCombiner::ReduceLoadWidth() to replace the 64-bit load with a 32-bit load.

However, this transformation is not valid, as the replacement load is not
a pre-increment load.  The pre-increment load produces an extra result,
which feeds a subsequent add instruction.  The replacement load only has
one result value, and this value is propagated to all uses of the pre-
increment load, including the add.  Because the add is looking for the
second result value as its operand, it ends up attempting to add a constant
to a token chain, resulting in a crash.

So the patch simply disables this transformation for any load with more than
two result values.

llvm-svn: 172480
2013-01-14 22:04:38 +00:00
Andrew Trick d4e1b5e291 SCEVExpander fix. RAUW needs to update the InsertedExpressions cache.
Note that this bug is only exposed because LTO fails to use TTI.

Fixes self-LTO of clang. rdar://13007381.

llvm-svn: 172462
2013-01-14 21:00:37 +00:00
Michael Gottesman c99ee6b336 Added bugzilla PR number to test case.
llvm-svn: 172369
2013-01-13 22:17:22 +00:00
Michael Gottesman f15c0bb495 Fixed an infinite loop in the block escape in analysis in ObjCARC caused by 2x blocks each assigned a value via a phi-node causing each to depend on the other.
A test case is provided as well.

llvm-svn: 172368
2013-01-13 22:12:06 +00:00
Benjamin Kramer bcd14a0f26 X86: Add patterns for X86ISD::VSEXT in registers.
Those can occur when something between the sextload and the store is on the same
chain and blocks isel. Fixes PR14887.

llvm-svn: 172353
2013-01-13 11:37:04 +00:00
Nadav Rotem 40e45eeae2 Fix PR14547. Handle induction variables of small sizes smaller than i32 (i8 and i16).
llvm-svn: 172348
2013-01-13 07:56:29 +00:00
Benjamin Kramer 5ea0349ef5 When lowering an inreg sext first shift left, then right arithmetically.
Shifting right two times will only yield zero. Should fix
SingleSource/UnitTests/SignlessTypes/factor.

llvm-svn: 172322
2013-01-12 19:06:44 +00:00
Michael Gottesman 556ff61122 Fixed bug in ObjCARC where we were changing a call from objc_autoreleaseRV => objc_autorelease but were not updating the InstructionClass to IC_Autorelease.
llvm-svn: 172288
2013-01-12 01:25:19 +00:00
Michael Gottesman c9656faf1e Fixed a bug where we were tail calling objc_autorelease causing an object to not be placed into an autorelease pool.
The reason that this occurs is that tail calling objc_autorelease eventually
tail calls -[NSObject autorelease] which supports fast autorelease. This can
cause us to violate the semantic gaurantees of __autoreleasing variables that
assignment to an __autoreleasing variables always yields an object that is
placed into the innermost autorelease pool.

The fix included in this patch works by:

1. In the peephole optimization function OptimizeIndividualFunctions, always
remove tail call from objc_autorelease.
2. Whenever we convert to/from an objc_autorelease, set/unset the tail call
keyword as appropriate.

*NOTE* I also handled the case where objc_autorelease is converted in
OptimizeReturns to an autoreleaseRV which still violates the ARC semantics. I
will be removing that in a later patch and I wanted to make sure that the tree
is in a consistent state vis-a-vis ARC always.

Additionally some test cases are provided and all tests that have tail call marked
objc_autorelease keywords have been modified so that tail call has been removed.

*NOTE* One test fails due to a separate bug that I am going to commit soon. Thus
I marked the check line TMP: instead of CHECK: so make check does not fail.

llvm-svn: 172287
2013-01-12 01:25:15 +00:00
Jack Carter 873c724b4a This patch tackles the problem of parsing Mips
register names in the standalone assembler llvm-mc.

Registers such as $A1 can represent either a 32 or
64 bit register based on the instruction using it.
In addition, based on the abi, $T0 can represent different
32 bit registers.


The problem is resolved by the Mips specific AsmParser 
td definitions changing to work together. Many cases of
RegisterClass parameters are now RegisterOperand.


Contributer: Vladimir Medic
llvm-svn: 172284
2013-01-12 01:03:14 +00:00
Nadav Rotem dbe5c72d03 PPC: Implement efficient lowering of sign_extend_inreg.
llvm-svn: 172269
2013-01-11 22:57:48 +00:00
Preston Gurd 99c6990457 Update patch for the pad short functions pass for Intel Atom (only).
Adds a check for -Oz, changes the code to not re-visit BBs,
and skips over DBG_VALUE instrs.

Patch by Andy Zhang.

llvm-svn: 172258
2013-01-11 22:06:56 +00:00
Nadav Rotem e55aa3c848 ARM Cost Model: Modify the target independent cost model to ask
the target if it supports the different CAST types. We didn't do this
on X86 because of the different register sizes and types, but on ARM
this makes sense.

llvm-svn: 172245
2013-01-11 19:54:13 +00:00
Eric Christopher 0cb6fd930e For inline asm:
- recognize string "{memory}" in the MI generation
- mark as mayload/maystore when there's a memory clobber constraint.

PR14859.

Patch by Krzysztof Parzyszek

llvm-svn: 172228
2013-01-11 18:12:39 +00:00
Tim Northover 3a51aab390 Simplify writing floating types to assembly.
This removes previous special cases for each floating-point type in favour of a
shared codepath.

llvm-svn: 172189
2013-01-11 10:36:13 +00:00
Nadav Rotem 853fe0acb9 ARM Cost Model: We need to detect the max bitwidth of types in the loop in order to select the max vectorization factor.
We don't have a detailed analysis on which values are vectorized and which stay scalars in the vectorized loop so we use
another method. We look at reduction variables, loads and stores, which are the only ways to get information in and out
of loop iterations. If the data types are extended and truncated then the cost model will catch the cost of the vector
zext/sext/trunc operations.

llvm-svn: 172178
2013-01-11 07:11:59 +00:00
Michael Gottesman 5284bd013f Converted test dont-tce-tail-marked-call.ll to use FileCheck.
llvm-svn: 172172
2013-01-11 04:16:35 +00:00
Michael Gottesman 93a0d49c7e This commit is a 4x squash commit consisting of 4x functions converted to use FileCheck instead of grep.
Messages:
Converted test case trivial_codegen_tailcall.ll to use FileCheck.
Converted test return_constant.ll to use FileCheck instead of grep.
Converted test reorder_load.ll to use FileCheck instead of grep.
Converted test intervening-inst.ll to use FileCheck instead of grep.

llvm-svn: 172171
2013-01-11 04:12:53 +00:00
Shuxin Yang c5c730b0e0 PR14904: Segmentation fault running pass 'Recognize loop idioms'
The root cause is mistakenly taking for granted that 
    "dyn_cast<Instruction>(a-Value)"
return a non-NULL instruction.

llvm-svn: 172145
2013-01-10 23:32:01 +00:00
Evan Cheng 098d7b76b0 CastInst::castIsValid should return true if the dest type is the same as
Value's current type. The casting is trivial even for aggregate type.

llvm-svn: 172143
2013-01-10 23:22:53 +00:00
NAKAMURA Takumi e46e8225f4 llvm/test/CodeGen/X86/ms-inline-asm.ll: Fixup; Globals doesn't have leading underscore in symbol on linux.
llvm-svn: 172139
2013-01-10 23:02:48 +00:00
Michael J. Spencer d857c1c9bf [llvm-objdump] Emit addresses with the correct number of leading 0's.
llvm-svn: 172130
2013-01-10 22:40:50 +00:00
Peter Collingbourne f7d65c43d0 [msan] Change va_start/va_copy shadow memset alignment to 8.
This fixes va_start/va_copy of a va_list field which happens to not
be laid out at a 16-byte boundary.

Differential Revision: http://llvm-reviews.chandlerc.com/D276

llvm-svn: 172128
2013-01-10 22:36:33 +00:00
Evan Cheng c8444b159a PR14896: Handle memcpy from constant string where the memcpy size is larger than the string size.
llvm-svn: 172124
2013-01-10 22:13:27 +00:00
Chad Rosier a4bc9437a2 [ms-inline asm] Add support for calling functions from inline assembly.
Part of rdar://12991541

llvm-svn: 172121
2013-01-10 22:10:27 +00:00
Owen Anderson dbf0ca523d Teach InstCombine to hoist FABS and FNEG through FPTRUNC instructions. The application of these operations commutes with the truncation, so we should prefer to do them in the smallest size we can, to save register space, use smaller constant pool entries, etc.
llvm-svn: 172117
2013-01-10 22:06:52 +00:00
Nadav Rotem 6eae65cfac LoopVectorizer: Fix a bug in the vectorization of BinaryOperators. The BinaryOperator can be folded to an Undef, and we don't want to set NSW flags to undef vals.
PR14878

llvm-svn: 172079
2013-01-10 17:34:39 +00:00
Joey Gouly 5fad3e9ad6 Fix a copy/paste error in the IR Linker, casting an ArrayType instead of a VectorType.
llvm-svn: 172054
2013-01-10 10:49:36 +00:00
Joey Gouly 58bf951dec Fix TryToShrinkGlobalToBoolean in GlobalOpt, so that it does not discard address spaces.
llvm-svn: 172051
2013-01-10 10:31:11 +00:00
Manman Ren 207bcbacca Stack Alignment: throw error if we can't satisfy the minimal alignment
requirement when creating stack objects in MachineFrameInfo.

Add CreateStackObjectWithMinAlign to throw error when the minimal alignment
can't be achieved and to clamp the alignment when the preferred alignment
can't be achieved. Same is true for CreateVariableSizedObject.
Will not emit error in CreateSpillStackObject or CreateStackObject.

As long as callers of CreateStackObject do not assume the object will be
aligned at the requested alignment, we should not have miscompile since
later optimizations which look at the object's alignment will have the correct
information.

rdar://12713765

llvm-svn: 172027
2013-01-10 01:10:10 +00:00
Nadav Rotem b1791a75cd ARM Cost model: Use the size of vector registers and widest vectorizable instruction to determine the max vectorization factor.
llvm-svn: 172010
2013-01-09 22:29:00 +00:00
Evan Cheng 5652a8df32 Fix a DAG combine bug visitBRCOND() is transforming br(xor(x, y)) to br(x != y).
It cahced XOR's operands before calling visitXOR() but failed to update the
operands when visitXOR changed the XOR node.

rdar://12968664

llvm-svn: 171999
2013-01-09 20:56:40 +00:00
Benjamin Kramer 130fcde3e5 LICM: Hoist insertvalue/extractvalue out of loops.
Fixes PR14854.

llvm-svn: 171984
2013-01-09 18:12:03 +00:00
Adhemerval Zanella 1ae2248e14 PowerPC: EH adjustments
This patch adjust the r171506 to make all DWARF enconding pc-relative
for PPC64. It also adds the R_PPC64_REL32 relocation handling in MCJIT
(since the eh_frame will not generate PIC-relative relocation) and also
adds the emission of stubs created by the TTypeEncoding.

llvm-svn: 171979
2013-01-09 17:08:15 +00:00
Nadav Rotem 3f5825c6c1 add -march to the test
llvm-svn: 171956
2013-01-09 07:04:23 +00:00
Nadav Rotem 977e0be4a0 Efficient lowering of vector sdiv when the divisor is a splatted power of two constant.
PR 14848. The lowered sequence is based on the existing sequence the target-independent
DAG Combiner creates for the scalar case.

Patch by Zvi Rackover.

llvm-svn: 171953
2013-01-09 05:14:33 +00:00
Andrew Trick 9f0b95f260 MIsched: add an ILP window property to machine model.
This was an experimental option, but needs to be defined
per-target. e.g. PPC A2 needs to aggressively hide latency.

I converted some in-order scheduling tests to A2. Hal is working on
more test cases.

llvm-svn: 171946
2013-01-09 03:36:49 +00:00
Nadav Rotem 4c66f87e8e ARM Cost Model: Add a basic vectorization unrolling test.
llvm-svn: 171931
2013-01-09 01:29:07 +00:00
Nadav Rotem 30a65bc39e Remove the -licm pass from the loop vectorizer test because the loop vectorizer does it now.
llvm-svn: 171930
2013-01-09 01:20:59 +00:00
Nadav Rotem b696c36fcd Cost Model: Move the 'max unroll factor' variable to the TTI and add initial Cost Model support on ARM.
llvm-svn: 171928
2013-01-09 01:15:42 +00:00