This patch removes uses of the deprecated `DirectoryEntry::getName()` from the `ModuleMap::diagnoseHeaderInclusion()` function by using `{File,Directory}EntryRef` instead.
Reviewed By: bnbarham
Differential Revision: https://reviews.llvm.org/D123856
This reverts commit 69dd89fdcb.
This reverts commit 04000c2f92.
The current states breaks libstdc++ usage (https://reviews.llvm.org/D119136#3455423).
The fixup has been reverted as it caused other valid code to be disallowed.
I think we should start from the clean state by reverting all relevant commits.
WG14 has elected to remove support for K&R C functions in C2x. The
feature was introduced into C89 already deprecated, so after this long
of a deprecation period, the committee has made an empty parameter list
mean the same thing in C as it means in C++: the function accepts no
arguments exactly as if the function were written with (void) as the
parameter list.
This patch implements WG14 N2841 No function declarators without
prototypes (http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2841.htm)
and WG14 N2432 Remove support for function definitions with identifier
lists (http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2432.pdf).
It also adds The -fno-knr-functions command line option to opt into
this behavior in other language modes.
Differential Revision: https://reviews.llvm.org/D123955
This patch changes the member of `FrameworkCacheEntry` from `const DirectoryEntry *` to `Optional<DirectoryEntryRef>` in order to remove uses of the deprecated `DirectoryEntry::getName()`.
Reviewed By: bnbarham
Differential Revision: https://reviews.llvm.org/D123854
This patch removes uses of the deprecated `DirectoryEntry::getName()` from `HeaderSearch::load*()` functions by using `DirectoryEntryRef` instead.
Note that we bail out in one case and use the also deprecated `FileEntry::getLastRef()`. That's to prevent this patch from growing, and is addressed in a follow-up.
Reviewed By: bnbarham
Differential Revision: https://reviews.llvm.org/D123771
C89 had a questionable feature where the compiler would implicitly
declare a function that the user called but was never previously
declared. The resulting function would be globally declared as
extern int func(); -- a function without a prototype which accepts zero
or more arguments.
C99 removed support for this questionable feature due to severe
security concerns. However, there was no deprecation period; C89 had
the feature, C99 didn't. So Clang (and GCC) both supported the
functionality as an extension in C99 and later modes.
C2x no longer supports that function signature as it now requires all
functions to have a prototype, and given the known security issues with
the feature, continuing to support it as an extension is not tenable.
This patch changes the diagnostic behavior for the
-Wimplicit-function-declaration warning group depending on the language
mode in effect. We continue to warn by default in C89 mode (due to the
feature being dangerous to use). However, because this feature will not
be supported in C2x mode, we've diagnosed it as being invalid for so
long, the security concerns with the feature, and the trivial
workaround for users (declare the function), we now default the
extension warning to an error in C99-C17 mode. This still gives users
an easy workaround if they are extensively using the extension in those
modes (they can disable the warning or use -Wno-error to downgrade the
error), but the new diagnostic makes it more clear that this feature is
not supported and should be avoided. In C2x mode, we no longer allow an
implicit function to be defined and treat the situation the same as any
other lookup failure.
Differential Revision: https://reviews.llvm.org/D122983
D119136 changed how captures are handled in a lambda call operator
declaration, but did not properly handled dependant context,
which led to crash when refering to init-captures in
a trailing return type.
We fix that bug by making transformations more symetric with parsing,
ie. we first create the call operator, then transform the capture,
then compute the type of the lambda call operaror.
This ensures captures exist and have the right type when
we parse a trailing requires-clause / return type.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D124012
We add a new clang library called `clangSupport` for putting those utils which can be used in clang table-gen and other clang component.
We tried to put that into `llvm/Support`, but actually those stuffs only used in clang* and clang-tblgen, so I think that might be better to create `clang/Support`
* clang will used that in https://reviews.llvm.org/D111617.
Reviewed By: khchen, MaskRay, aaron.ballman
Differential Revision: https://reviews.llvm.org/D121984
Fixes [[ https://github.com/llvm/llvm-project/issues/38995 | #38995 ]]
This is an attempt to modify the regular expression to identify
`@import` and `import` alongside the regular `#include`. The challenging
part was not to support `@` in addition to `#` but how to handle
everything that comes after the `include|import` keywords. Previously
everything that wasn't `"` or `<` was consumed. But as you can see in
this example from the issue #38995, there is no `"` or `<` following the
keyword:
```
@import Foundation;
```
I experimented with a lot of fancy and useful expressions in [this
online regex tool](https://regex101.com) only to find out that some
things are simply not supported by the regex implementation in LLVM.
* For example the beginning `[\t\ ]*` should be replacable by the
horizontal whitespace character `\h*` but this will break the
`SortIncludesTest.LeadingWhitespace` test.
That's why I've chosen to come back to the basic building blocks.
The essential change in this patch is the change from this regular
expression:
```
^[\t\ ]*#[\t\ ]*(import|include)[^"<]*(["<][^">]*[">])
~ ~~~~~~~~~~~~~~
^ ^
| |
only support # prefix not @ |
only support "" and <> as
delimiters
no support for C++ modules and ;
ending. Also this allows for ">
or <" or "" or <> which all seems
either off or wrong.
```
to this:
```
^[\t\ ]*[@#][\t\ ]*(import|include)([^"]*("[^"]+")|[^<]*(<[^>]+>)|[\t\
]*([^;]+;))
~~~~ ~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~
~~~~~~~~~~~~~~
^ ^ ^ ^ ^
| | | | |
Now support @ and #. Clearly support "" and <> as
well as an
include name without enclosing
characters.
Allows for no mixture of "> or
<" or
empty include names.
```
Here is how I've tested this patch:
```
ninja clang-Format
ninja FormatTests
./tools/clang/unittests/Format/FormatTests
--gtest_filter=SortIncludesTest*
```
And if that worked I doubled checked that nothing else broke by running
all format checks:
```
./tools/clang/unittests/Format/FormatTests
```
One side effect of this change is it should partially support
[C++20 Module](https://en.cppreference.com/w/cpp/language/modules)
`import` lines without the optional `export` in front. Adding
this can be a change on its own that shouldn't be too hard. I say
partially because the `@` or `#` are currently *NOT* optional in the
regular expression.
I see an opportunity to optimized the matching to exclude `@include` for
example. But eventually these should be caught by the compiler, so...
With my change, the matching group is not at a fixed position any
longer. I decided to
choose the last match (group) that is not empty.
Reviewed By: HazardyKnusperkeks
Differential Revision: https://reviews.llvm.org/D121370
Reimplements MisExpect diagnostics from D66324 to reconstruct its
original checking methodology only using MD_prof branch_weights
metadata.
New checks rely on 2 invariants:
1) For frontend instrumentation, MD_prof branch_weights will always be
populated before llvm.expect intrinsics are lowered.
2) for IR and sample profiling, llvm.expect intrinsics will always be
lowered before branch_weights are populated from the IR profiles.
These invariants allow the checking to assume how the existing branch
weights are populated depending on the profiling method used, and emit
the correct diagnostics. If these invariants are ever invalidated, the
MisExpect related checks would need to be updated, potentially by
re-introducing MD_misexpect metadata, and ensuring it always will be
transformed the same way as branch_weights in other optimization passes.
Frontend based profiling is now enabled without using LLVM Args, by
introducing a new CodeGen option, and checking if the -Wmisexpect flag
has been passed on the command line.
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D115907
Motivation: The intent here is for use in Swift.
When building a clang module for swift consumption, swift adds an
extension block to the module for name lookup purposes. Swift calls
this a SwiftLookupTable. One purpose that this serves is to handle
conflicting names between ObjC classes and ObjC protocols. They exist in
different namespaces in ObjC programs, but in Swift they would exist in
the same namespace. Swift handles this by appending a suffix to a
protocol name if it shares a name with a class. For example, if you have
an ObjC class named "Foo" and a protocol with the same name, the
protocol would be renamed to "FooProtocol" when imported into swift.
When constructing the previously mentioned SwiftLookupTable, we use
Sema::LookupName to look up name conflicts for the previous problem.
By this time, the Parser has long finished its job so the call to
LookupName gets nullptr for its Scope (TUScope will be nullptr
by this point). The C/ObjC path does not have this problem because it
only uses the Scope in specific scenarios. The C++ codepath uses the
Scope quite extensively and will fail early on if the Scope it gets is
null. In our very specific case of looking up ObjC classes with a
specific name, we want to force sema::LookupName to take the C/ObjC
codepath even if C++ or ObjC++ is enabled.
Summary: Handle casts for ranges working similarly to APSIntType::apply function but for the whole range set. Support promotions, truncations and conversions.
Example:
promotion: char [0, 42] -> short [0, 42] -> int [0, 42] -> llong [0, 42]
truncation: llong [4295033088, 4295033130] -> int [65792, 65834] -> short [256, 298] -> char [0, 42]
conversion: char [-42, 42] -> uint [0, 42]U[4294967254, 4294967295] -> short[-42, 42]
Differential Revision: https://reviews.llvm.org/D103094
Summary:
Previously we needed the `Xopenmp-target=` option during the linking
phase so the old offloading driver knew which items to extract and link
for the device. Now that the new driver has become the default this is
no longer necessary and will cause a warning to be emitted for the
unused argument. This should be silenced to avoid noise.
D121387 simplified the doc url generation process, so we no longer need
the HasAlphaDocumentation enum entry. This patch removes that.
Reviewed By: martong
Differential Revision: https://reviews.llvm.org/D121459
When doing overload resolution, we have to check that candidates' parameter types are equal before trying to find a better candidate through checking which candidate is more constrained.
This revision adds this missing check and makes us diagnose those cases as ambiguous calls when the types are not equal.
Fixes GitHub issue https://github.com/llvm/llvm-project/issues/53640
Reviewed By: erichkeane
Differential Revision: https://reviews.llvm.org/D123182
Previously an opt-in flag `-fopenmp-new-driver` was used to enable the
new offloading driver. After passing tests for a few months it should be
sufficiently mature to flip the switch and make it the default. The new
offloading driver is now enabled if there is OpenMP and OpenMP
offloading present and the new `-fno-openmp-new-driver` is not present.
The new offloading driver has three main benefits over the old method:
- Static library support
- Device-side LTO
- Unified clang driver stages
Depends on D122683
Differential Revision: https://reviews.llvm.org/D122831
Partially implement the proposed resolution to CWG2569.
D119136 broke some libstdc++ code, as P2036R3, implemented as a DR to
C++11 made ill-formed some previously valid and innocuous code.
We resolve this issue to allow decltype(x) - but not decltype((x)
to appear in the parameter list of a lambda that capture x by copy.
Unlike CWG2569, we do not extend that special treatment to
sizeof/noexcept yet, as the resolution has not been approved yet
and keeping the review small allows a quicker fix of impacted code.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D123909
This is extended to all `std::` functions that take a reference to a
value and return a reference (or pointer) to that same value: `move`,
`forward`, `move_if_noexcept`, `as_const`, `addressof`, and the
libstdc++-specific function `__addressof`.
We still require these functions to be declared before they can be used,
but don't instantiate their definitions unless their addresses are
taken. Instead, code generation, constant evaluation, and static
analysis are given direct knowledge of their effect.
This change aims to reduce various costs associated with these functions
-- per-instantiation memory costs, compile time and memory costs due to
creating out-of-line copies and inlining them, code size at -O0, and so
on -- so that they are not substantially more expensive than a cast.
Most of these improvements are very small, but I measured a 3% decrease
in -O0 object file size for a simple C++ source file using the standard
library after this change.
We now automatically infer the `const` and `nothrow` attributes on these
now-builtin functions, in particular meaning that we get a warning for
an unused call to one of these functions.
In C++20 onwards, we disallow taking the addresses of these functions,
per the C++20 "addressable function" rule. In earlier language modes, a
compatibility warning is produced but the address can still be taken.
The same infrastructure is extended to the existing MSVC builtin
`__GetExceptionInfo`, which is now only recognized in namespace `std`
like it always should have been.
This is a re-commit of
fc30901096,
a571f82a50, and
64c045e25b
which were reverted in
e75d8b7037
due to a crasher bug where CodeGen would emit a builtin glvalue as an
rvalue if it constant-folds.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D123345
A randomized structure needs to use a designated or default initializer.
Using a non-designated initializer will result in values being assigned
to the wrong fields.
Differential Revision: https://reviews.llvm.org/D123763
The previous patch introduced the offloading binary format so we can
store some metada along with the binary image. This patch introduces
using this inside the linker wrapper and Clang instead of the previous
method that embedded the metadata in the section name.
Differential Revision: https://reviews.llvm.org/D122683
std::addressof, plus the libstdc++-specific std::__addressof.
This brings us to parity with the corresponding GCC behavior.
Remove STDBUILTIN macro that ended up not being used.
We still require these functions to be declared before they can be used,
but don't instantiate their definitions unless their addresses are
taken. Instead, code generation, constant evaluation, and static
analysis are given direct knowledge of their effect.
This change aims to reduce various costs associated with these functions
-- per-instantiation memory costs, compile time and memory costs due to
creating out-of-line copies and inlining them, code size at -O0, and so
on -- so that they are not substantially more expensive than a cast.
Most of these improvements are very small, but I measured a 3% decrease
in -O0 object file size for a simple C++ source file using the standard
library after this change.
We now automatically infer the `const` and `nothrow` attributes on these
now-builtin functions, in particular meaning that we get a warning for
an unused call to one of these functions.
In C++20 onwards, we disallow taking the addresses of these functions,
per the C++20 "addressable function" rule. In earlier language modes, a
compatibility warning is produced but the address can still be taken.
The same infrastructure is extended to the existing MSVC builtin
`__GetExceptionInfo`, which is now only recognized in namespace `std`
like it always should have been.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D123345
A randomized structure needs to use a designated or default initializer.
Using a non-designated initializer will result in values being assigned
to the wrong fields.
Differential Revision: https://reviews.llvm.org/D123763
The target profile option(/T) decide the shader model when compile hlsl.
The format is shaderKind_major_minor like ps_6_1.
The shader model is saved as llvm::Triple is clang/llvm like
dxil-unknown-shadermodel6.1-hull.
The main job to support the option is translating ps_6_1 into
shadermodel6.1-pixel.
That is done inside tryParseProfile at HLSL.cpp.
To integrate the option into clang Driver, a new DriverMode DxcMode is
created. When DxcMode is enabled, OSType for TargetTriple will be
forced into Triple::ShaderModel. And new ToolChain HLSLToolChain will
be created when OSType is Triple::ShaderModel.
In HLSLToolChain, ComputeEffectiveClangTriple is overridden to call
tryParseProfile when targetProfile option is set.
To make test work, Fo option is added and .hlsl is added for active
-xhlsl.
Reviewed By: beanz
Differential Revision: https://reviews.llvm.org/D122865
Patch by: Xiang Li <python3kgae@outlook.com>
In D123649, I got the formula for getFlexibleArrayInitChars slightly
wrong: the flexible array elements can be contained in the tail padding
of the struct. Fix the formula to account for that.
With the fixed formula, we run into another issue: in some cases, we
were emitting extra padding for flexible arrray initializers. Fix
CGExprConstant so it uses a packed struct when necessary, to avoid this
extra padding.
Differential Revision: https://reviews.llvm.org/D123826
Implement P2036R3.
Captured variables by copy (explicitely or not), are deduced
correctly at the point we know whether the lambda is mutable,
and ill-formed before that.
Up until now, the entire lambda declaration up to the start of the body would be parsed in the parent scope, such that capture would not be available to look up.
The scoping is changed to have an outer lambda scope, followed by the lambda prototype and body.
The lambda scope is necessary because there may be a template scope between the start of the lambda (to which we want to attach the captured variable) and the prototype scope.
We also need to introduce a declaration context to attach the captured variable to (and several parts of clang assume captures are handled from the call operator context), before we know the type of the call operator.
The order of operations is as follow:
* Parse the init capture in the lambda's parent scope
* Introduce a lambda scope
* Create the lambda class and call operator
* Add the init captures to the call operator context and the lambda scope. But the variables are not capured yet (because we don't know their type).
Instead, explicit captures are stored in a temporary map that conserves the order of capture (for the purpose of having a stable order in the ast dumps).
* A flag is set on LambdaScopeInfo to indicate that we have not yet injected the captures.
* The parameters are parsed (in the parent context, as lambda mangling recurses in the parent context, we couldn't mangle a lambda that is attached to the context of a lambda whose type is not yet known).
* The lambda qualifiers are parsed, at this point We can switch (for the second time) inside the lambda context, unset the flag indicating that we have not parsed the lambda qualifiers,
record the lambda is mutable and capture the explicit variables.
* We can parse the rest of the lambda type, transform the lambda and call operator's types and also transform the call operator to a template function decl where necessary.
At this point, both captures and parameters can be injected in the body's scope. When trying to capture an implicit variable, if we are before the qualifiers of a lambda, we need to remember that the variables are still in the parent's context (rather than in the call operator's).
Reviewed By: aaron.ballman, #clang-language-wg, ChuanqiXu
Differential Revision: https://reviews.llvm.org/D119136
This patch changes the return type of `PreprocessorLexer::getFileEntry()` so that its clients may stop using the deprecated APIs of `FileEntry`.
Reviewed By: bnbarham
Differential Revision: https://reviews.llvm.org/D123772
This catches places where a function without a prototype is
accidentally used, potentially passing an incorrect number of
arguments, and is a follow-up to the work done in
https://reviews.llvm.org/D122895 and described in the RFC
(https://discourse.llvm.org/t/rfc-enabling-wstrict-prototypes-by-default-in-c).
The diagnostic is grouped under the new -Wdeprecated-non-prototypes
warning group and is enabled by default.
The diagnostic is disabled if the function being called was implicitly
declared (the user already gets an on-by-default warning about the
creation of the implicit function declaration, so no need to warn them
twice on the same line). Additionally, the diagnostic is disabled if
the declaration of the function without a prototype was in a location
where the user explicitly disabled deprecation warnings for functions
without prototypes (this allows the provider of the API a way to
disable the diagnostic at call sites because the lack of prototype is
intentional).
Flexible array initialization is a C/C++ extension implemented in many
compilers to allow initializing the flexible array tail of a struct type
that contains a flexible array. In clang, this is currently restricted
to C. But this construct is used in the Microsoft SDK headers, so I'd
like to extend it to C++.
For now, this doesn't handle dynamic initialization; probably not hard
to implement, but it's extra code, and I don't think it's necessary for
the expected uses. And we explicitly fail out of constant evaluation.
I've added some additional code to assert that initializers have the
correct size, with or without flexible array init. This might catch
issues unrelated to flexible array init.
Differential Revision: https://reviews.llvm.org/D123649
HLSL does not support pointers or references. This change generates
errors in sema for generating pointer, and reference types as well as
common operators (address-of, dereference, arrow), which are used with
pointers and are unsupported in HLSL.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D123167
HLSL has a language feature called Semantics which get attached to
declarations like attributes and are used in a variety of ways.
One example of semantic use is here with the `SV_GroupIndex` semantic
which, when applied to an input for a compute shader is pre-populated
by the driver with a flattened thread index.
Differential Revision: https://reviews.llvm.org/D122699
# Conflicts:
# clang/include/clang/Basic/Attr.td
# clang/include/clang/Basic/AttrDocs.td
Undefined behaviour is just passed on to extract_element when the
index is out of bounds. Subscript on svbool_t is not allowed as
this doesn't really have meaningful semantics.
Differential Revision: https://reviews.llvm.org/D122732
The semantics of `-mmlir` are identical to `-mllvm`. The only notable
difference is that `-mmlir` options should be forwarded to MLIR rather
than LLVM.
Note that MLIR llvm::cl options are lazily constructed on demand (see
the definition of options in PassManagerOptions.cpp). This means that:
* MLIR global options are only visible when explicitly initialised and
displayed only when using `-mmlir --help`,
* Flang and LLVM global options are always visible and displayed when
using either `-mllvm -help` or `-mmlir --help`.
In other words, `-mmlir --help` is a superset of `-mllvm --help`. This is not
ideal, but we'd need to refactor all option definitions in Flang and
LLVM to improve this. I suggesting leaving this for later.
Differential Revision: https://reviews.llvm.org/D123297
This is the template version of https://reviews.llvm.org/D114251.
This patch introduces a new template name kind (UsingTemplateName). The
UsingTemplateName stores the found using-shadow decl (and underlying
template can be retrieved from the using-shadow decl). With the new
template name, we can be able to find the using decl that a template
typeloc (e.g. TemplateSpecializationTypeLoc) found its underlying template,
which is useful for tooling use cases (include cleaner etc).
This patch merely focuses on adding the node to the AST.
Next steps:
- support using-decl in qualified template name;
- update the clangd and other tools to use this new node;
- add ast matchers for matching different kinds of template names;
Differential Revision: https://reviews.llvm.org/D123127
This patch changes type of the `File` parameter in `PPCallbacks::InclusionDirective()` from `const FileEntry *` to `Optional<FileEntryRef>`.
With the API change in place, this patch then removes some uses of the deprecated `FileEntry::getName()` (e.g. in `DependencyGraph.cpp` and `ModuleDependencyCollector.cpp`).
Reviewed By: dexonsmith, bnbarham
Differential Revision: https://reviews.llvm.org/D123574
The current cc1 CLANG_ENABLE_OPAQUE_POINTERS=on default difference is not ideal
in that people contribute %clang_cc1 tests may assume the default ON behavior,
which will cause failures on systems set to OFF.
cc1 option default dependent on CMake options should be used prudently
(generally avoided). We prefer to limit target differences to Driver.
Change the CLANG_ENABLE_OPAQUE_POINTERS_INTERNAL mechanism introduced in D123122
to use a driver default instead. This is similar to the mechanism used for the
-flegacy-pass-manager transition to new PM transition.
Reviewed By: #opaque-pointers, rsmith, aeubanks
Differential Revision: https://reviews.llvm.org/D123744
Implement P2036R3.
Captured variables by copy (explicitely or not), are deduced
correctly at the point we know whether the lambda is mutable,
and ill-formed before that.
Up until now, the entire lambda declaration up to the start
of the body would be parsed in the parent scope, such that
captures would not be available to look up.
The scoping is changed to have an outer lambda scope,
followed by the lambda prototype and body.
The lambda scope is necessary because there may be a template scope
between the start of the lambda (to which we want to attach
the captured variable) and the prototype scope.
We also need to introduce a declaration context to attach the captured
variable to (and several parts of clang assume captures are handled from
the call operator context), before we know the type of the call operator.
The order of operations is as follow:
* Parse the init capture in the lambda's parent scope
* Introduce a lambda scope
* Create the lambda class and call operator
* Add the init captures to the call operator context and the lambda scope.
But the variables are not capured yet (because we don't know their type).
Instead, explicit captures are stored in a temporary map that
conserves the order of capture (for the purpose of having a stable order in the ast dumps).
* A flag is set on LambdaScopeInfo to indicate that we have not yet injected the captures.
* The parameters are parsed (in the parent context, as lambda mangling recurses in the parent context,
we couldn't mangle a lambda that is attached to the context of a lambda whose type is not yet known).
* The lambda qualifiers are parsed, at this point,
we can switch (for the second time) inside the lambda context,
unset the flag indicating that we have not parsed the lambda qualifiers,
record the lambda is mutable and capture the explicit variables.
* We can parse the rest of the lambda type, transform the lambda and call operator's types and also
transform the call operator to a template function decl where necessary.
At this point, both captures and parameters can be injected in the body's scope.
When trying to capture an implicit variable, if we are before the qualifiers of a lambda,
we need to remember that the variables are still in the parent's context (rather than in the call operator's).
This is a recommit of adff142dc2 after a fix in d8d793f29b
Reviewed By: aaron.ballman, #clang-language-wg, ChuanqiXu
Differential Revision: https://reviews.llvm.org/D119136
Jan Svoboda