This fixes a crash in the OpenCV test:
ImgprocWarpResizeArea/Resize.Mat/16
There is no test case for this, because this failure depends on a
specific ordering of the loads, which could easily change.
llvm-svn: 217040
This reapplies r216805 with a fix to a copy-past error, which resulted in an
incorrect register class.
Original commit message:
Select the correct register class for the various instructions that are
generated when combining instructions and constrain the registers to the
appropriate register class.
This fixes rdar://problem/18183707.
llvm-svn: 217019
There is already target-dependent instruction selection support for Adds/Subs to
support compares and the intrinsics with overflow check. This takes advantage of
the existing infrastructure to also support Add/Sub, which allows the folding of
immediates, sign-/zero-extends, and shifts.
This fixes rdar://problem/18207316.
llvm-svn: 217007
This uses the target-dependent selection code for shifts first, which allows us
to create better code for shifts with immediates and sign-/zero-extend folding.
Vector type are not handled yet and the code falls back to target-independent
instruction selection for these cases.
This fixes rdar://problem/17907920.
llvm-svn: 216985
FastISel for AArch64 supports more value types than are actually legal. Use a
dedicated helper function to reflect this.
It is very similar to the isLoadStoreTypeLegal function, with the exception
that vector types are not supported yet.
llvm-svn: 216984
The only valid lowering of atomic stores in the X86 backend was mov from
register to memory. As a result, storing an immediate required a useless copy
of the immediate in a register. Now these can be compiled as a simple mov.
Similarily, adding/and-ing/or-ing/xor-ing an
immediate to an atomic location (but through an atomic_store/atomic_load,
not a fetch_whatever intrinsic) can now make use of an 'add $imm, x(%rip)'
instead of using a register. And the same applies to inc/dec.
This second point matches the first issue identified in
http://llvm.org/bugs/show_bug.cgi?id=17281
llvm-svn: 216980
This change moves FastISel for AArch64 to target-dependent instruction selection
only. This change replicates the existing target-independent behavior, therefore
there are no changes to the unit tests or new tests.
Future changes will take advantage of this change and update functionality
and unit tests.
llvm-svn: 216955
We duplicate ~30 lines of code to lower FABS and FNEG for x86, so this patch combines them into one function.
No functional change intended, so no additional test cases. Test-suite behavior is unchanged.
Differential Revision: http://reviews.llvm.org/D5064
llvm-svn: 216942
This removes static initializers from the backends which generate this data, and also makes this struct match the other Tablegen generated structs in behaviour
Reviewed by Andy Trick and Chandler C
llvm-svn: 216919
Summary:
Left shift of negative integer is an undefined behavior, and
is reported by UBSan. It's ok for imm values to be negative, so we can
just replace left shifts with multiplications.
Test Plan: check-llvm test suite
Reviewers: t.p.northover
Reviewed By: t.p.northover
Subscribers: aemerson, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D5132
llvm-svn: 216910
r208640 was reverted because it caused a self-hosting failure on ppc64. The
underlying cause was the formation of ISD::ADD nodes with ISD::TargetConstant
operands. Because we have no patterns for 'add' taking 'timm' nodes, these are
selected as r+r add instructions (which is a miscompile). Guard against this
kind of behavior in the future by making the backend crash should this occur
(instead of silently generating invalid output).
llvm-svn: 216897
The structures for Windows unwinding are shared across multiple platforms.
Indicate the encoding to be used for the particular target. Use this to switch
the unwind emitter instantiated by the AsmPrinter.
llvm-svn: 216895
This change will ease refactoring LowerFABS() and LowerFNEG()
since they have a lot of overlap.
Remove the creation of a floating point constant from an integer
because it's going to be used for a bitwise integer op anyway.
No change to codegen expected, but the verbose comment string
for asm output may change from float values to hex (integer),
depending on whether the constant already exists or not.
Differential Revision: http://reviews.llvm.org/D5052
llvm-svn: 216889
This patch implements a few changes related to the Thumb2 M-class MSR instruction:
* better handling of unpredictable encodings,
* recognition of the _g and _nzcvqg variants by the asm parser only if the DSP
extension is available, preferred output of MSR APSR moves with the _<bits>
suffix for v7-M.
Patch by Petr Pavlu.
llvm-svn: 216874
Select the correct register class for the various instructions that are
generated when combining instructions and constrain the registers to the
appropriate register class.
This fixes rdar://problem/18183707.
llvm-svn: 216805
Summary:
If a variadic function body contains a musttail call, then we copy all
of the remaining register parameters into virtual registers in the
function prologue. We track the virtual registers through the function
body, and add them as additional registers to pass to the call. Because
this is all done in virtual registers, the register allocator usually
gives us good code. If the function does a call, however, it will have
to spill and reload all argument registers (ew).
Forwarding regparms on x86_32 is not implemented because most compilers
don't support varargs in 32-bit with regparms.
Reviewers: majnemer
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D5060
llvm-svn: 216780
We've rejected these kinds of functions since r28405 in 2006 because
it's impossible to lower the return of a callee cleanup varargs
function. However there are lots of legal ways to leave such a function
without returning, such as aborting. Today we can leave a function with
a musttail call to another function with the correct prototype, and
everything works out.
I'm removing the verifier check declaring that a normal return from such
a function is UB.
Reviewed By: nlewycky
Differential Revision: http://reviews.llvm.org/D5059
llvm-svn: 216779
This patch checks for DAG patterns that are an add or a sub followed by a
compare on 16 and 8 bit inputs. Since AArch64 does not support those types
natively they are legalized into 32 bit values, which means that mask operations
are inserted into the DAG to emulate overflow behaviour. In many cases those
masks do not change the result of the processing and just introduce a dependent
operation, often in the middle of a hot loop.
This patch detects the relevent DAG patterns and then tests to see if the
transforms are equivalent with and without the mask, removing the mask if
possible. The exact mechanism of this patch was discusses in
http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-July/074444.html
There is a reasonably good chance there are missed oppurtunities due to similiar
(but not identical) DAG patterns that could be funneled into this test, adding
them should be simple if we see test cases.
Tests included.
rdar://13754426
llvm-svn: 216776
The new solution is to not use this lowering if there are any dynamic
allocas in the current function. We know up front if there are dynamic
allocas, but we don't know if we'll need to create stack temporaries
with large alignment during lowering. Conservatively assume that we will
need such temporaries.
Reviewed By: hans
Differential Revision: http://reviews.llvm.org/D5128
llvm-svn: 216775
Summary:
Mostly renaming the (not very explicit) variables Tmp0, .. Tmp4, and grouping
related statements together, along with a few lines of comments for the
surprising parts.
No functional change intended.
Test Plan: make check-all
Reviewers: jfb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5088
llvm-svn: 216768
When we select a trunc instruction we don't emit any code if the type is already
i32 or smaller. This is because the instruction that uses the truncated value
will deal with it.
This behavior can incorrectly transfer a kill flag, which was meant for the
result of the truncate, onto the source register.
%2 = trunc i32 %1 to i16
... = ... %2 -> ... = ... vreg1 <kill>
... = ... %1 ... = ... vreg1
This commit fixes this by emitting a COPY instruction, so that the result and
source register are distinct virtual registers.
This fixes rdar://problem/18178188.
llvm-svn: 216750
Summary:
Instead of specifying the alignment as metadata which may be destroyed by
transformation passes, make the alignment the second argument to ldu/ldg
intrinsic calls.
Test Plan:
ldu-ldg.ll
ldu-i8.ll
ldu-reg-plus-offset.ll
Reviewers: eliben, meheff, jholewinski
Reviewed By: meheff, jholewinski
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D5093
llvm-svn: 216731
In an llvm-stress generated test, we were trying to create a v0iN type and
asserting when that failed. This case could probably be handled by the
function, but not without added complexity and the situation it arises in is
sufficiently odd that there's probably no benefit anyway.
Should fix PR20775.
llvm-svn: 216725
Tom Stellard