differs from lldb's own shared cache, and where the inferior process shared
cache does not match up with the on-disk shared cache file.
Simplify the code where lldb gets its own shared cache uuid a little bit.
llvm-svn: 179633
Show an error message when we have a corrupt mach-o file where the LC_SEGMENT or LC_SEGMENT_64 load command have file offsets or file offsets + sizes that extend beyond the end of the file.
llvm-svn: 179605
a UUID for the shared cache libraries that can be used to confirm
that one process' shared cache is the same as another, or that a
process' in-memory shared cache is a match for a given on-disk
dyld_shared_cache binary file. Use these UUIDs to catch some
uncommon problems when the shared caches are being changed for debug
purposes.
<rdar://problem/13524467>
llvm-svn: 179583
SectionList so we don't try to do anything with this file. Currently we end up crashing
later in the debug session when we read past the end of the file -- this at least gets us
closer with something like ProcessMachCore printing "error: core file has no sections".
<rdar://problem/13468295>
llvm-svn: 179152
LLDB is crashing when logging is enabled from lldb-perf-clang. This has to do with the global destructor chain as the process and its threads are being torn down.
All logging channels now make one and only one instance that is kept in a global pointer which is never freed. This guarantees that logging can correctly continue as the process tears itself down.
llvm-svn: 178191
This returns a vector of <file address, size> entries for all of
the functions in the module that have an eh_frame FDE.
Update ObjectFileMachO to use the eh_frame FDE function addresses if
the LC_FUNCTION_STARTS section is missing, to fill in the start
addresses of any symbols that have been stripped from the binary.
Generally speaking, lldb works best if it knows the actual start
address of every function in a module - it's especially important
for unwinding, where lldb inspects the instructions in the prologue
of the function. In a stripped binary, it is deprived of this
information and it reduces the quality of our unwinds and saved
register retrieval.
Other ObjectFile users may want to use the function addresses from
DWARFCallFrameInfo to fill in any stripped symbols like ObjectFileMachO
does already.
<rdar://problem/13365659>
llvm-svn: 177624
DWARF with .o files now uses 40-60% less memory!
Big fixes include:
- Change line table internal representation to contain "file addresses". Since each line table is owned by a compile unit that is owned by a module, it makes address translation into lldb_private::Address easy to do when needed.
- Removed linked address members/methods from lldb_private::Section and lldb_private::Address
- lldb_private::LineTable can now relink itself using a FileRangeMap to make it easier to re-link line tables in the future
- Added ObjectFile::ClearSymtab() so that we can get rid of the object file symbol tables after we parse them once since they are not needed and kept memory allocated for no reason
- Moved the m_sections_ap (std::auto_ptr to section list) and m_symtab_ap (std::auto_ptr to the lldb_private::Symtab) out of each of the ObjectFile subclasses and put it into lldb_private::ObjectFile.
- Changed how the debug map is parsed and stored to be able to:
- Lazily parse the debug map for each object file
- not require the address map for a .o file until debug information is linked for a .o file
llvm-svn: 176454
- generate-vers.pl has to be called by cmake to generate the version number
- parallel builds not yet supported; dependency on clang must be explicitly specified
Tested on Linux.
- Building on Mac will require code-signing logic to be implemented.
- Building on Windows will require OS-detection logic and some selective directory inclusion
Thanks to Carlo Kok (who originally prepared these CMakefiles for Windows) and Ben Langmuir
who ported them to Linux!
llvm-svn: 175795
lldb was mmap'ing archive files once per .o file it loads, now it correctly shares the archive between modules.
LLDB was also always mapping entire contents of universal mach-o files, now it maps just the slice that is required.
Added a new logging channel for "lldb" called "mmap" to help track future regressions.
Modified the ObjectFile and ObjectContainer plugin interfaces to take a data offset along with the file offset and size so we can implement the correct caching and efficient reading of parts of files without mmap'ing the entire file like we used to.
The current implementation still keeps entire .a files mmaped (once) and entire slices from universal files mmaped to ensure that if a client builds their binaries during a debug session we don't lose our data and get corrupt object file info and debug info.
llvm-svn: 174524
function stub routine addresses from an in-memory-only
MachO object file. This was the only remaining part of
ParseSymtab() that was assuming a file exists.
<rdar://problem/13139585>
llvm-svn: 174455
Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary.
So I defined a new "lldb::offset_t" which should be used for all file offsets.
After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed.
Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections.
llvm-svn: 173463
equality can be strict or loose and we want code to
explicitly choose one or the other.
Also renamed the Compare function to IsEqualTo, to
avoid confusion.
<rdar://problem/12856749>
llvm-svn: 170152
When using the same-device optimization for shared cache libraries, if
we have an invalid load address for __LINKEDIT, don't try to read
anything out of lldb's own address space. Reading it out of the remote
address space will fail gracefully if we have bad addresses but reading
it out of lldb's own address space will result in a crash.
llvm-svn: 169582
Allow the expression parser to see more than just data symbols. We now accept any symbol that has an address. We take precautions to only accept symbols by their mangled or demangled names only if the demangled name was not synthesized. If the demangled name is synthesized, then we now mark symbols accordingly and only compare against the mangled original name.
llvm-svn: 168668
RegisterContextKDP_i386 was not correctly writing registers due to missing "virtual" keywords. Added the virtual keywords and made the functions pure virtual to ensure subclasses can't get away without implementing these functions.
llvm-svn: 167066
is being run on iOS natively and we are examining a binary that is
in the shared-cache. The shared cache may be set up to not load the
symbol names in memory (and may be missing some local symbols entirely,
to boot) so we need to read the on-disk-but-not-mapped-into-memory cache
of symbol names/symbols before we start processing the in-memory nlist
entries.
This code needs to be reorganized into its own separate method, ideally
we'll find some way to not duplicate the nlist symbol handling. But
we need to handle this new format quickly and we'll clean up later.
Thanks for James McIlree for the patch. Fixes <rdar://problem/11639018>.
llvm-svn: 158891
a cache of address ranges for child sections,
accelerating lookups. This cache is built during
object file loading, and is then set in stone once
the object files are done loading. (In Debug builds,
we ensure that the cache is never invalidated after
that.)
llvm-svn: 158188
Fixed an issue with the symbol table parsing of files that have STAB entries in them where there are two N_SO entries where the first has a directory, and the second contains a full path:
[ 0] 00000002 64 (N_SO ) 00 0000 0000000000000000 '/Volumes/data/src/'
[ 1] 0000001e 64 (N_SO ) 00 0000 0000000000000000 '/Volumes/data/src/Source/main.m'
[ 2] 00000047 66 (N_OSO ) 09 0001 000000004fc642d2 '/tmp/main.o'
[ 3] 00000001 2e (N_BNSYM ) 01 0000 0000000000003864
[ 4] 000000bd 24 (N_FUN ) 01 0000 0000000000003864 '_main'
[ 5] 00000001 24 (N_FUN ) 00 0000 00000000000000ae
[ 6] 00000001 4e (N_ENSYM ) 01 0000 00000000000000ae
[ 7] 00000001 64 (N_SO ) 01 0000 0000000000000000
We now correctly combine entries 0 and 1 into a single entry.
llvm-svn: 157712
Fixed an issue with the FUNC_STARTS load command where we would get the
symbol size wrong and we would add all sorts of symbols due to bit zero being
set to indicate thumb.
llvm-svn: 152696
Simplify the locking strategy for Module and its owned objects to always use the Module's mutex to avoid A/B deadlocks. We had a case where a symbol vendor was locking itself and then calling a function that would try to get it's Module's mutex and at the same time another thread had the Module mutex that was trying to get the SymbolVendor mutex. Now any classes that inherit from ModuleChild should use the module lock using code like:
void
ModuleChildSubclass::Function
{
ModuleSP module_sp(GetModule());
if (module_sp)
{
lldb_private::Mutex::Locker locker(module_sp->GetMutex());
... do work here...
}
}
This will help avoid deadlocks by using as few locks as possible for a module and all its child objects and also enforce detecting if a module has gone away (the ModuleSP will be returned empty if the weak_ptr does refer to a valid object anymore).
llvm-svn: 152679
Get function boundaries from the LC_FUNCTION_STARTS load command. This helps to determine symbol sizes and also allows us to be able to debug stripped binaries.
If you have a stack backtrace that goes through a function that has been stripped from the symbol table, the variables for any functions above that stack frame will most likely be incorrect. It can also affect our ability to step in/out/through of a function.
llvm-svn: 152381
Greg Clayton