This is currently bare-bones; we aren't taking advantage of any of the
FMA variant instructions. But it's enough to at least generate
code.
Differential Revision: https://reviews.llvm.org/D83444
This patch adds the instruction definitions and the assembly/disassembly
tests for the Load/Store VSX Vector Rightmose instructions.
Differential Revision: https://reviews.llvm.org/D83364
This is practically NFC at the moment because nothing really
asks the real number or does anything useful with it.
Differential Revision: https://reviews.llvm.org/D82202
If we don't immediately lower the vector shift, the splat
constant vector we created may get turned into a constant pool
load before we get around to lowering the shift. This makes it
a lot more difficult to create a shift by constant. Sometimes we
fail to see through the constant pool at all and end up trying
to lower as if it was a variable shift. This requires custom
handling and may create an unsupported vselect on pre-sse-4.1
targets. Since we're after LegalizeVectorOps we are unable to
legalize the unsupported vselect as that code is in LegalizeVectorOps
rather than LegalizeDAG.
So calling LowerShift immediately ensures that we get see the
splat constant.
Fixes PR46527.
Differential Revision: https://reviews.llvm.org/D83455
Technically a VSELECT expects a vector of all 1s or 0s elements
for its condition. But we aren't guaranteeing that the sign bit
and the non sign bits match in these locations. So we should use
BLENDV which is more relaxed.
Differential Revision: https://reviews.llvm.org/D83447
Currently the instruction paddi always takes s34imm as the type for the
34 bit immediate. However, the PC Relative form of the instruction should
not produce the same fixup as the non PC Relative form.
This patch splits the s34imm type into s34imm and s34imm_pcrel so that two
different fixups can be emitted.
Reviewed By: kamaub, nemanjai
Differential Revision: https://reviews.llvm.org/D83255
If we're extracting a subvector from a shuffle that is shuffling entire subvectors we can peek through and extract the subvector from the shuffle source instead.
This helps remove some cases where concat_vectors(extract_subvector(),extract_subvector()) legalizations has resulted in BLEND/VPERM2F128 shuffles of the subvectors.
Since the `RISCVExpandPseudo` pass has been split from
`RISCVExpandAtomicPseudo` pass, it would be nice to run the former as
early as possible (The latter has to be run as late as possible to
ensure correctness). Running earlier means we can reschedule these pairs
as we see fit.
Running earlier in the machine pass pipeline is good, but would mean
teaching many more passes about `hasLabelMustBeEmitted`. Splitting the
basic blocks also pessimises possible optimisations because some
optimisations are MBB-local, and others are disabled if the block has
its address taken (which is notionally what `hasLabelMustBeEmitted`
means).
This patch uses a new approach of setting the pre-instruction symbol on
the AUIPC instruction to a temporary symbol and referencing that. This
avoids splitting the basic block, but allows us to reference exactly the
instruction that we need to. Notionally, this approach seems more
correct because we do actually want to address a specific instruction.
This then allows the pass to be moved much earlier in the pass pipeline,
before both scheduling and register allocation. However, to do so we
must leave the MIR in SSA form (by not redefining registers), and so use
a virtual register for the intermediate value. By using this virtual
register, this pass now has to come before register allocation.
Reviewed By: luismarques, asb
Differential Revision: https://reviews.llvm.org/D82988
When adding support for scalable vector masked loads and stores we
accidently opened up likewise for fixed length vectors. This patch
restricts support to scalable vectors only, thus ensuring fixed
length vectors are treated the same regardless of SVE support.
Differential Revision: https://reviews.llvm.org/D83341
Fixed length vector code generation for SVE does not yet custom
lower BUILD_VECTOR and instead relies on expansion. At the same
time custom lowering for VECTOR_SHUFFLE is also not available so
this patch updates isShuffleMaskLegal to reject vector types that
require SVE.
Related to this it also prevents the merging of stores after
legalisation because this only works when BUILD_VECTOR is either
legal or can be elminated. When this is not the case the code
generator enters an infinite legalisation loop.
Differential Revision: https://reviews.llvm.org/D83408
On PPC64, for a variadic function, if va_start is not called, it won't
access any variadic argument on stack, thus we can save stores of
registers used to pass arguments.
Differential Revision: https://reviews.llvm.org/D82361
GFX10 image instructions use one or more address operands starting at
vaddr0, instead of a single vaddr operand, to allow for NSA forms.
Differential Revision: https://reviews.llvm.org/D81675
Fix the division/remainder algorithm by adding a second quotient
refinement step, which is required in some cases like
0xFFFFFFFFu / 0x11111111u (https://bugs.llvm.org/show_bug.cgi?id=46212).
Also document, rewrite and simplify it by ensuring that we always have a
lower bound on inv(y), which simplifies the UNR step and the quotient
refinement steps.
Differential Revision: https://reviews.llvm.org/D83381
Revision e1de2773a5 provided support for
accepting integer registers in inline asm i.e.
__asm("lhi %r0, 5") -> lhi %r0, 5
__asm("lhi 0, 5") -> lhi 0,5
This patch aims to extend this support to instructions which compute
addresses as well. (i.e instructions of type BDMem and BD[X|R|V|L]Mem)
Author: anirudhp
Differential Revision: https://reviews.llvm.org/D83251
Summary:
Almost all uses of these iterators, including implicit ones, really
only need the const variant (as it should be). The only exception is
in NewGVN, which changes the order of dominator tree child nodes.
Change-Id: I4b5bd71e32d71b0c67b03d4927d93fe9413726d4
Reviewers: arsenm, RKSimon, mehdi_amini, courbet, rriddle, aartbik
Subscribers: wdng, Prazek, hiraditya, kuhar, rogfer01, rriddle, jpienaar, shauheen, antiagainst, nicolasvasilache, arpith-jacob, mgester, lucyrfox, aartbik, liufengdb, stephenneuendorffer, Joonsoo, grosul1, vkmr, Kayjukh, jurahul, msifontes, cfe-commits, llvm-commits
Tags: #clang, #mlir, #llvm
Differential Revision: https://reviews.llvm.org/D83087
vselect ((X & Pow2C) == 0), LHS, RHS --> vselect ((shl X, C') < 0), RHS, LHS
Follow-up to D83073 - the non-splat mask cases where we actually see an
improvement are quite limited from what I can tell. AVX1 needs multiply
and blend capabilities and AVX2 needs vector shift and blend capabilities.
The intersection of those 2 constraints is only vectors with 32-bit or
64-bit elements.
XOP is/was better.
Differential Revision: https://reviews.llvm.org/D83181
We use extact_subvector and insert_subvector to "cast" between
fixed length and scalable vectors. This patch adds custom c++
based ISel for the following cases:
fixed_vector = ISD::EXTRACT_SUBVECTOR scalable_vector, 0
scalable_vector = ISD::INSERT_SUBVECTOR undef(scalable_vector), fixed_vector, 0
Which result in either EXTRACT_SUBREG/INSERT_SUBREG for NEON sized
vectors or COPY_TO_REGCLASS otherwise.
Differential Revision: https://reviews.llvm.org/D82871
For an addition with an immediate in specific ranges, a pair of
addi-addi can be generated instead of the ordinary lui-addi-add serial.
Reviewed By: MaskRay, luismarques
Differential Revision: https://reviews.llvm.org/D82262
... to shift/add or shift/sub.
Do not enable it on riscv32 with the M extension where decomposeMulByConstant
may not be an optimization.
Reviewed By: luismarques, MaskRay
Differential Revision: https://reviews.llvm.org/D82660
Summary:
Add support for user-defined types to MasmParser, including initialization and field access.
Known issues:
- Omitted entry initializers (e.g., <,0>) do not work consistently for nested structs/arrays.
- Size checking/inference for values with known types is not yet implemented.
- Some ml64.exe syntaxes for accessing STRUCT fields are not recognized.
- `[<register>.<struct name>].<field>`
- `[<register>[<struct name>.<field>]]`
- `(<struct name> PTR [<register>]).<field>`
- `[<variable>.<struct name>].<field>`
- `(<struct name> PTR <variable>).<field>`
Reviewed By: thakis
Differential Revision: https://reviews.llvm.org/D75306
handleAssignments was assuming every argument type is an MVT, and
assignArg would always fail. This fixes one of the hacks in the
current AMDGPU calling convention code that pre-processes the
arguments.
The tests in a5b9ad7e9a actually failed
the verifier, which for some reason is not the default. Also add tests
for 0-sized function arguments, which do not add entries to the
expected register lists.
This patch creates a clang flag to enable SESES. This flag also ensures that
lvi-cfi is on when using seses via clang.
SESES should use lvi-cfi to mitigate returns and indirect branches.
The flag to enable the SESES functionality only without lvi-cfi is now
-x86-seses-enable-without-lvi-cfi to warn users part of the mitigation is not
enabled if they use this flag. This is useful in case folks want to see the
cost of SESES separate from the LVI-CFI.
Reviewed By: sconstab
Differential Revision: https://reviews.llvm.org/D79910
We were checking the VBROADCAST_LOAD element size against the extraction destination size instead of the extracted vector element size - PEXTRW/PEXTB have implicit zext'ing so have i32 destination sizes for v8i16/v16i8 vectors, resulting in us extracting from the wrong part of a load.
This patch bails from the fold if the vector element sizes don't match, and we now use the target constant extraction code later on like the pre-AVX2 targets, fixing the test case.
Found by internal fuzzing tests.
Use SESES as the fallback at O0 where the optimized LVI pass isn't desired due
to its effect on build times at O0.
I updated the LVI tests since this changes the code gen for the tests touched in the parent revision.
This is a follow up to the comments I made here: https://reviews.llvm.org/D80964
Hopefully we can continue the discussion here.
Also updated SESES to handle LFENCE instructions properly instead of adding
redundant LFENCEs. In particular, 1) no longer add LFENCE if the current
instruction being processed is an LFENCE and 2) no longer add LFENCE if the
instruction right before the instruction being processed is an LFENCE
Reviewed By: sconstab
Differential Revision: https://reviews.llvm.org/D82037
Since WebAssembly's vector shift instructions take a scalar shift
amount rather than a vector shift amount, we have to check in ISel
that the vector shift amount is a splat. Previously, we were checking
explicitly for splat BUILD_VECTOR nodes, but this change uses the
standard utilities for detecting splat values that can handle more
complex splat patterns. Since the C++ ISel lowering is now more
general than the ISel patterns, this change also simplifies shift
lowering by using the C++ lowering for all SIMD shifts rather than
mixing C++ and normal pattern-based lowering.
This change improves ISel for shifts to the point that the
simd-shift-unroll.ll regression test no longer tests the code path it
was originally meant to test. The bug corresponding to that regression
test is no longer reproducible with its original reported reproducer,
so rather than try to fix the regression test, this change just
removes it.
Differential Revision: https://reviews.llvm.org/D83278
Provide the LLVM intrinsics needed to implement vector replace element
builtins in altivec.h which will be added in a subsequent patch.
Differential Revision: https://reviews.llvm.org/D83308
In the test based on PR46586:
https://bugs.llvm.org/show_bug.cgi?id=46586
...we are inserting 16-bits into the high element of the vector, shuffling it
to element 0, and extracting 32-bits. But xmm1 was never initialized, so the
top 16-bits of the extract are undef without this patch.
(It seems like we could do better than this by recognizing that we only demand
a subsection of the build vector, but I want to make sure we fix the
miscompile 1st.)
This path is only used for pre-SSE4.1, and simpler patterns get squashed
somewhere along the way, so the test still includes a 'urem' as it did in the
original test from the bug report.
Differential Revision: https://reviews.llvm.org/D83319
When an argument has 'byval' attribute and should be
passed on the stack according calling convention,
a stack copy would be emitted twice. This will cause
the real value will be put into stack where the pointer
should be passed.
Differential Revision: https://reviews.llvm.org/D83175
In an earlier commit 584d0d5c17 I
added functionality to allow AArch64 CodeGen support for falling
back to DAG ISel when Global ISel encounters scalable vector
types. However, it seems that we were not falling back early
enough as llvm::getLLTForType was still being invoked for scalable
vector types.
I've added a new fallback function to the call lowering class in
order to catch this problem early enough, rather than wait for
lowerFormalArguments to reject scalable vector types.
Differential Revision: https://reviews.llvm.org/D82524
When legalizing shuffles, we make an attempt to combine it into
a PPC specific canonical form that avoids a need for a swap. If the
combine is successful, we RAUW the node and the custom legalization
replaces the now dead node instead of the one it should replace.
Remove that erroneous call to RAUW.
This patch aims to exploit the xxsplti32dx XT, IX, IMM32 instruction when lowering VECTOR_SHUFFLEs.
We implement lowerToXXSPLTI32DX when lowering vector shuffles to check if:
- Element size is 4 bytes
- The RHS is a constant vector (and constant splat of 4-bytes)
- The shuffle mask is a suitable mask for the XXSPLTI32DX instruction where it is one of the 32 masks:
<0, 4-7, 2, 4-7>
<4-7, 1, 4-7, 3>
Differential Revision: https://reviews.llvm.org/D83245
Eli Friedman