In x86Disassembler{OneByte,TwoByte,...}Codes,
"/* EmptyTable */" is very common. Omitting it saves lots of space.
Also, there is no need to display a table entry in multiple lines.
It is also common that the whole OpcodeDecision is { MODRM_ONEENTRY, 0}.
Make use of zero-initialization.
Add a predicate to MCInstDesc that allows tools to determine whether an
instruction authenticates a pointer. This can be used by diagnostic
tools to hint at pointer authentication failures.
Differential Revision: https://reviews.llvm.org/D70329
rdar://55089604
For arguments that are not expected to be materialized with
G_CONSTANT, this was emitting predicates which could never match. It
was first adding a meaningless LLT check, which would always fail due
to the operand not being a register.
Infer the cases where a literal should check for an immediate operand,
instead of a register This avoids needing to invent a special way of
representing timm literal values.
Also handle immediate arguments in GIM_CheckLiteralInt. The comments
stated it handled isImm() and isCImm(), but that wasn't really true.
This unblocks work on the selection of all of the complicated AMDGPU
intrinsics in future commits.
The current implementation assumes there is an instruction associated
with the transform, but this is not the case for
timm/TargetConstant/immarg values. These transforms should directly
operate on a specific MachineOperand in the source
instruction. TableGen would assert if you attempted to define an
equivalent GISDNodeXFormEquiv using timm when it failed to find the
instruction matcher.
Specially recognize SDNodeXForms on timm, and pass the operand index
to the render function.
Ideally this would be a separate render function type that looks like
void renderFoo(MachineInstrBuilder, const MachineOperand&), but this
proved to be somewhat mechanically painful. Add an optional operand
index which will only be passed if the transform should only look at
the one source operand.
Theoretically it would also be possible to only ever pass the
MachineOperand, and the existing renderers would check the parent. I
think that would be somewhat ugly for the standard usage which may
want to inspect other operands, and I also think MachineOperand should
eventually not carry a pointer to the parent instruction.
Use it in one sample pattern. This isn't a great example, since the
transform exists to satisfy DAG type constraints. This could also be
avoided by just changing the MachineInstr's arbitrary choice of
operand type from i16 to i32. Other patterns have nontrivial uses, but
this serves as the simplest example.
One flaw this still has is if you try to use an SDNodeXForm defined
for imm, but the source pattern uses timm, you still see the "Failed
to lookup instruction" assert. However, there is now a way to avoid
it.
Summary:
Extend D71677 to apply to all branch-target operands, rather than special-casing call instructions.
Also add a regression test for llvm.org/PR44272, since this finishes fixing it.
Reviewers: thakis, rnk
Reviewed By: thakis
Subscribers: merge_guards_bot, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72417
Summary:
GIMatchTree's job is to build a decision tree by zipping all the
GIMatchDag's together.
Each DAG is added to the tree builder as a leaf and partitioners are used
to subdivide each node until there are no more partitioners to apply. At
this point, the code generator is responsible for testing any untested
predicates and following any unvisited traversals (there shouldn't be any
of the latter as the getVRegDef partitioner handles them all).
Note that the leaves don't always fit into partitions cleanly and the
partitions may overlap as a result. This is resolved by cloning the leaf
into every partition it belongs to. One example of this is a rule that can
match one of N opcodes. The leaf for this rule would end up in N partitions
when processed by the opcode partitioner. A similar example is the
getVRegDef partitioner where having rules (add $a, $b), and (add ($a, $b), $c)
will result in the former being in the partition for successfully
following the vreg-def and failing to do so as it doesn't care which
happens.
Depends on D69151
Fixed the issues with the windows bots which were caused by stdout/stderr
interleaving.
Reviewers: bogner, volkan
Reviewed By: volkan
Subscribers: lkail, mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69152
Copy the logic from the existing handling in the DAG matcher emittter.
This will enable some AMDGPU pattern cleanups without breaking
GlobalISel tests, and eventually handle importing more patterns.
The test is a bit annoying since the sections seem to randomly sort
themselves if anything else is added in the future.
While looking at cycle time graphs of some of my bots, I noticed
that 327894859c made check-llvm noticeably slower on macOS and
Windows.
As it turns out, the 5 substitutions added in that change were
enough to cause lit to thrash the build-in cache in re.compile()
(re.sub() is implemented as re.compile().sub()), and apparently
applySubstitutions() is on the cricital path and slow when all
regexes need to compile all the time.
(See `_MAXCACHE = 512` in cpython/Lib/re.py)
Supporting full regexes for lit substitutions seems a bit like
overkill, but for now add a simple unbounded cache to recover
the lost performance.
No intended behavior change.
All the windows bots are failing match-tree.td and there's no obvious cause that
I can see. It's not just the %p formatting problem. My best guess is that
there's an ordering issue too but I'll need further information to figure that
out. Revert while I'm investigating.
This reverts commit 64f1bb5cd2 and 77d4b5f5fe
Summary:
GIMatchTree's job is to build a decision tree by zipping all the
GIMatchDag's together.
Each DAG is added to the tree builder as a leaf and partitioners are used
to subdivide each node until there are no more partitioners to apply. At
this point, the code generator is responsible for testing any untested
predicates and following any unvisited traversals (there shouldn't be any
of the latter as the getVRegDef partitioner handles them all).
Note that the leaves don't always fit into partitions cleanly and the
partitions may overlap as a result. This is resolved by cloning the leaf
into every partition it belongs to. One example of this is a rule that can
match one of N opcodes. The leaf for this rule would end up in N partitions
when processed by the opcode partitioner. A similar example is the
getVRegDef partitioner where having rules (add $a, $b), and (add ($a, $b), $c)
will result in the former being in the partition for successfully
following the vreg-def and failing to do so as it doesn't care which
happens.
Depends on D69151
Reviewers: bogner, volkan
Reviewed By: volkan
Subscribers: lkail, mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69152
There's quite a lot of references to Polly in the LLVM CMake codebase. However
the registration pattern used by Polly could be useful to other external
projects: thanks to that mechanism it would be possible to develop LLVM
extension without touching the LLVM code base.
This patch has two effects:
1. Remove all code specific to Polly in the llvm/clang codebase, replaicing it
with a generic mechanism
2. Provide a generic mechanism to register compiler extensions.
A compiler extension is similar to a pass plugin, with the notable difference
that the compiler extension can be configured to be built dynamically (like
plugins) or statically (like regular passes).
As a result, people willing to add extra passes to clang/opt can do it using a
separate code repo, but still have their pass be linked in clang/opt as built-in
passes.
Differential Revision: https://reviews.llvm.org/D61446
When functions exist for some but not all run lines we need to be
careful when selecting the prefix. So far, a common prefix was
potentially chosen as there was never a "conflict" that would have
caused otherwise. With this patch we avoid common prefixes if they
are used by run lines that do not emit the function.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D68850
If we have `int foo(int a) { return a; }` and we run with --function-signature
enabled, we want a single variable declaration for `a` which is reused
later.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D69722
Attribute annotations on calls, e.g., #0, are not useful on their own.
This patch adds a flag to update_test_checks.py to scrub them.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D68851
This assumed a single pattern if there was a predicate. Relax this a
bit, and allow multiple patterns as long as they have the same class.
This was only broken for the DAG path. GlobalISel seems to have
handled this correctly already.
The majority of the running time of this script tends to be spent in
running git blame on source files touched by patches under review.
By introducing a git blame output cache, some of the git blame commands
don't have to re-run, and the blame information can be retrieved from a
cache.
I've observed that in a typical run matching patches available for
review with potential reviewers, this speeds up the script's running
time by a factor of about 2.5x.
Nico Weber