Summary: These instructions are available in ISAs >= mips32/mips64. For mips32r6/mips64r6, jr.hb has a new encoding format.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4019
llvm-svn: 210654
Summary:
Implement materialize of floating point literals in Mips Fast-Isel
Reopened version of D3659
Test Plan: simplestorefp1.ll
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4071
llvm-svn: 210546
The SelectionDAG bad a special case for ISD::SELECT_CC, where it would
allow targets to specify:
setOperationAction(ISD::SELECT_CC, MVT::Other, Expand);
to indicate that they wanted to expand ISD::SELECT_CC for all types.
This wasn't applied correctly everywhere, and it makes writing new
DAG patterns with ISD::SELECT_CC difficult.
llvm-svn: 210541
I saw at least a memory leak or two from inspection (on probably
untested error paths) and r206991, which was the original inspiration
for this change.
I ran this idea by Jim Grosbach a few weeks ago & he was OK with it.
Since it's a basically mechanical patch that seemed sufficient - usual
post-commit review, revert, etc, as needed.
llvm-svn: 210427
1) The commit was made despite profound lack of understanding:
"I did not understand the comment about using dyn_cast instead of isa. I will
commit as is and make the update after. You can explain what you meant to me."
Commit first, understand later isn't OK.
2) Review comments were simply ignored:
"Can you edit the summary to describe what the patch is for? It appears to be
a list of commits at the moment."
3) The patch got LGTM'd off-list without any indication of readiness.
4) The public mailing list was excluded from patch review so all of this was
hidden from the community.
This reverts commit r210414.
llvm-svn: 210424
Summary:
start to do simple constants
finish simplestore
add test case
format
Merge branch 'master' into 1756_8
Add basic functionality for assignment of ints. This creates a lot of core infrastructure in which to add, with little effort, quite a bit more to mips fast-isel
Merge branch 'master' into 1756_8
Add basic functionality for assignment of ints. This creates a lot of core infrastructure in which to add, with little effort, quite a bit more to mips fast-isel
in progress
finish integer materialize
test cases
test cases
in progress
Finish up fast-isel materialize for ints.
Finish materialize for ints
test cases
simplestorei.ll
Merge branch 'master' into 1756_8
fix fp constants for fast-isel
Merge branch '1758_1' of dmz-portal.mips.com:llvm into 1758_1
in progress
lastest for fp materialization
clean up
Merge branch 'master' into 1758_1
formatting
add test case
finish test case
Merge branch 'master' into 1758_2
Test Plan:
simplestore.ll
simplestore.ll
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3659
llvm-svn: 210414
Summary: Merge branch 'master' into 1758_6
Test Plan:
No functionality change. Run "make check" and run test-suite.
Because our servers are not yet running again I have not yet run test-suite.
I will further review myself before submission.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3819
llvm-svn: 210413
Summary:
Included this file which is needed to enable tablegen generated functionality
for fast mips-isel
Test Plan:
This has no visible functionality by itself but just adding the include
file creates some issues so I have it as a separate patch.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3812
llvm-svn: 210410
* Move the instruction that changes sp outside of the branch delay slot.
* Bundle-align the target of indirect branch.
Differential Revision: http://llvm-reviews.chandlerc.com/D3928
llvm-svn: 210262
%higher and %highest can have non-zero values only for offsets greater
than 2GB, which is highly unlikely, if not impossible when compiling a
single function. This makes long branch for MIPS64 3 instructions smaller.
Differential Revision: http://llvm-reviews.chandlerc.com/D3281.diff
llvm-svn: 209678
Summary:
Add a second fixup table to MipsAsmBackend::getFixupKindInfo() to correctly
position llvm-mc's fixup placeholders for big-endian.
See PR19836 for full details of the issue. To summarize, the fixup placeholders
do not account for endianness properly and the implementations of
getFixupKindInfo() for each target are measuring MCFixupKindInfo.TargetOffset
from different ends of the instruction encoding to compensate.
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3889
llvm-svn: 209514
Summary:
Instead the system is required to provide some means of handling unaligned
load/store without special instructions. Options include full hardware
support, full trap-and-emulate, and hybrids such as hardware support within
a cache line and trap-and-emulate for multi-line accesses.
MipsSETargetLowering::allowsUnalignedMemoryAccesses() has been configured to
assume that unaligned accesses are 'fast' on the basis that I expect few
hardware implementations will opt for pure-software handling of unaligned
accesses. The ones that do handle it purely in software can override this.
mips64-load-store-left-right.ll has been merged into load-store-left-right.ll
The stricter testing revealed a Bits!=Bytes bug in passByValArg(). This has
been fixed and the variables renamed to clarify the units they hold.
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3872
llvm-svn: 209512
Summary: Depends on D3787. Tablegen will raise an assertion without it.
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3842
llvm-svn: 209419
Summary:
These emit the 'unknown instruction' instead of the correct error
because they have not been implemented in LLVM for any MIPS ISA.
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3841
llvm-svn: 209418
Summary:
This required me to implement the disassembler for MIPS64r6 since the encodings
are ambiguous with other instructions. This in turn revealed a few
assembly/disassembly bugs which I have fixed.
* da[ht]i only take two operands according to the spec, not three.
* DecodeBranchTarget2[16] correctly handles wider immediates than simm16
* Also made non-functional change to DecodeBranchTarget and
DecodeBranchTargetMM to keep implementation style consistent between
them.
* Difficult encodings are handled by a custom decode method on the most
general encoding in the group. This method will convert the MCInst to a
different opcode if necessary.
DecodeBranchTarget is not currently the inverse of getBranchTargetOpValue
so disassembling some branch instructions emit incorrect output. This seems
to affect branches with delay slots on all MIPS ISA's. I've left this bug
for now and temporarily removed the check for the immediate on
bc[12]eqz/bc[12]nez in the MIPS32r6/MIPS64r6 tests.
jialc and jic crash the disassembler for some reason. I've left these
instructions commented out for the moment.
Depends on D3760
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3761
llvm-svn: 209415
After discussion with Zoran, we have decided to temporarily revert this commit.
It's causing some difficult to resolve conflicts and we are under time pressure
to deliver an initial MIPS64r6 compiler.
We will re-apply an equivalent patch once the time pressure has passed.
llvm-svn: 209211
This is mostly a mechanical change changing all the call sites to the newer
chained-function construction pattern. This removes the horrible 15-parameter
constructor for the CallLoweringInfo in favour of setting properties of the call
via chained functions. No functional change beyond the removal of the old
constructors are intended.
llvm-svn: 209082
This is a preliminary step to help ease the construction of CallLoweringInfo.
Changing the construction to a chained function pattern requires that the
parameter be nullable. However, rather than copying the vector, save a pointer
rather than the reference to permit a late binding of the arguments.
llvm-svn: 209080
Certainly not without having a custom PrintMethod to invert the immediate
beforehand. But probably not at all.
This will be tested when the TableGen "should I print this Alias" heuristic is
fixed (very soon).
llvm-svn: 208964
Summary:
No support for symbols in place of the immediate yet since it requires new
relocations.
Depends on D3671
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3689
llvm-svn: 208858
Summary:
They aren't implemented for any ISA at the moment.
Depends on D3670
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3671
llvm-svn: 208855
Summary:
Also use named constants for common opcode fields.
Depends on D3669
Reviewers: vmedic, zoran.jovanovic, jkolek
Reviewed By: jkolek
Differential Revision: http://reviews.llvm.org/D3670
llvm-svn: 208784
Summary:
This required a new instruction group representing the 32-bit subset of
MIPS-3 that was available in MIPS32R2.
To limit the number of tests required, only one 32-bit and one 64-bit ISA
prior to MIPS32/MIPS64 are tested.
rdhwr has been deliberately left without an ISA annotation for now. This is
because the assembler and CodeGen disagree on when the instruction is
available. Strictly speaking, it is only available in MIPS32r2 and
MIPS64r2. However, it is emulated by a kernel trap on earlier ISA's and is
necessary for TLS so CodeGen should emit it on older ISA's too.
Depends on D3696
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3697
llvm-svn: 208690
Summary:
We are currently very close to the 32-bit limit of the current assembler
implementation. This is because there is no way to represent an instruction
that is available in, for example, Mips3 or Mips32. We have to define a
feature bit that represents this.
This patch cleans up a pair of redundant feature bits and slightly postpones the
point we will reach the limit.
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3703
llvm-svn: 208685
r208453 added support for having sret on the second parameter. In that
change, the code for copying sret into a virtual register was hoisted
into the loop that lowers formal parameters. This caused a "Wrong
topological sorting" assertion failure during scheduling when a
parameter is passed in memory. This change undoes that by creating a
second loop that deals with sret.
I'm worried that this fix is incomplete. I don't fully understand the
dependence issues. However, with this change we produce the same DAGs
we used to produce, so if they are broken, they are just as broken as
they have always been.
llvm-svn: 208637
Summary:
Also use named constants for common opcode fields.
Depends on D3669
Reviewers: jkolek, vmedic, zoran.jovanovic
Differential Revision: http://reviews.llvm.org/D3670
llvm-svn: 208582
Summary: The 'mul' line of the test is temporarily commented out because it currently matches the MIPS32 mul instead of the MIPS32r6 mul. This line will be uncommented when we disable the MIPS32 mul on MIPS32r6.
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3668
llvm-svn: 208576
Summary:
To limit the number of tests required, only one 32-bit and one 64-bit ISA
prior to MIPS32/MIPS64 are explicitly tested.
Depends on D3695
Reviewers: vmedic
Differential Revision: http://reviews.llvm.org/D3696
llvm-svn: 208549
Summary:
This required a new instruction group representing the 32-bit subset of
MIPS-V that was available in MIPS32R2
Most of these instructions are correctly rejected but with the wrong error
message. These have been placed in a separate test for now. It happens
because many of the MIPS V instructions have not been implemented.
Depends on D3694
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3695
llvm-svn: 208546
Summary:
DCL[ZO] are now correctly marked as being MIPS64 instructions. This has no
effect on the CodeGen tests since expansion of i64 prevented their use
anyway.
The check for MIPS16 to prevent the use of CLZ no longer prevents DCLZ as
well. This is not a functional change since DCLZ is still prohibited by
being a MIPS64 instruction (MIPS16 is only compatible with MIPS32).
No functional change
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3694
llvm-svn: 208544
Summary:
dsbh and dshd are not available on Mips32r2. No codegen test changes
required since expansion of i64 prevented the use of these instructions
anyway.
Depends on D3690
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3692
llvm-svn: 208542
Summary:
No functional change.
The minor change to the MIPS16 code is in preparation for a patch that will handle 32-bit FPIdx instructions separately to 64-bit (because they were added in different revisions)
Depends on D3677
Reviewers: rkotler, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3690
llvm-svn: 208541
MSVC always places the implicit sret parameter after the implicit this
parameter of instance methods. We used to handle this for
x86_thiscallcc by allocating the sret parameter on the stack and leaving
the this pointer in ecx, but that doesn't handle alternative calling
conventions like cdecl, stdcall, fastcall, or the win64 convention.
Instead, change the verifier to allow sret on the second parameter.
This also requires changing the Mips and X86 backends to return the
argument with the sret parameter, instead of assuming that the sret
parameter comes first.
The Sparc backend also returns sret parameters in a register, but I
wasn't able to update it to handle secondary sret parameters. It
currently calls report_fatal_error if you feed it an sret in the second
parameter.
Reviewers: rafael.espindola, majnemer
Differential Revision: http://reviews.llvm.org/D3617
llvm-svn: 208453
Summary:
This required a new instruction group representing the 32-bit subset of
MIPS-IV that was available in MIPS32
A small number of instructions are correctly rejected but with the wrong error
message. These have been placed in a separate test for now.
Depends on D3676
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3677
llvm-svn: 208414
Summary:
This required a new instruction group representing the 32-bit subset of
MIPS-III that was available in MIPS32
A small number of instructions are correctly rejected but with the wrong error
message. These have been placed in a separate test for now.
There's some obvious InstAlias's that ought to be marked MIPS-III but arent.
This is because they are not currently tested. I intend to catch these with
a final pass through the tablegen records to find tablegen records without
ISA annotations.
Depends on D3674
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3675
llvm-svn: 208408
Summary:
Adds MIPS32r6/MIPS64r6 and checks the compatibility requirements for these
processors.
I've also included comments to describe removed and re-encoded instructions,
along with placeholder def's for the new instructions but there are no
functional changes to codegen at this point.
Reviewers: jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3622
llvm-svn: 208399
Summary:
These instructions were added in MIPS-I, and MIPS-II but were removed in
MIPS-III. Interestingly, GAS continues to accept them when assembling for
MIPS-III.
For the moment, these instructions will follow GAS and accept them for
MIPS-III and newer but this will be tightened up when the invalid-*.s
tests are added.
Depends on D3647
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3648
llvm-svn: 208311
Summary:
A small number of instructions are rejected with the wrong error message.
These have been placed in a separate test for now. There seems to be some
parsing quirk that triggers when these instructions are disabled.
Depends on D3571
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3647
llvm-svn: 208305
Summary:
These processors will only be available for the integrated assembler at
first (CodeGen will emit a fatal error saying they are not implemented).
The intention is to work through the existing instructions and correctly
annotate the ISA they were added in so that we have a sufficiently good
base to start MIPS64r6 development. MIPS64r6 removes/re-encodes certain
instructions and I believe it is best to define ISA's using set-union's
as far as possible rather than using set-subtraction.
Reviewers: vmedic
Subscribers: emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D3569
llvm-svn: 208221
Summary:
One small functional change. The recently added PAUSE instruction now has
the HasStdEnc predicate which was accidentally removed by a Requires<>.
Depends on D3640
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3641
llvm-svn: 208209
Summary:
Move IsGP64bit into GPRPredicates, and IsFP64bit/NotFP64bit into FGRPredicates
No functional change (confirmed by diffing tablegen-erated files).
Depends on D3639
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3640
llvm-svn: 208201
Summary:
This makes it easier to prove a more complicated change in the next commit
is non-functional.
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3639
llvm-svn: 208197
Summary:
The overall idea is to chop the Predicates list into subsets that are
usually overridden independently. This allows subclasses to partially
override the predicates of their superclasses without having to re-add all
the existing predicates.
This patch starts the process by moving HasStdEnc into a new
EncodingPredicates list and almost everything else into
AdditionalPredicates.
It has revealed a couple likely bugs where 'let Predicates' has removed
the HasStdEnc predicate.
No functional change (confirmed by diffing tablegen-erated files).
Depends on D3549, D3506
Reviewers: vmedic
Differential Revision: http://reviews.llvm.org/D3550
llvm-svn: 208184
Summary:
This will make it easier to prove that a more complicated change in the
following commit is non-functional.
No functional change.
Depends on D3506
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3549
llvm-svn: 208179
This creates a lot of core infrastructure in which to add, with little
effort, quite a bit more to mips fast-isel
Test Plan: simplestore.ll
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3527
llvm-svn: 207790
Summary:
There are two functional changes:
1) The directive is not expanded for the ASM->ASM code path.
2) If PIC is not set, there's no expansion for the ASM->OBJ code path (same behaviour as GAS).
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3482
llvm-svn: 207741
Summary: negu $reg is equivalent to negu $reg, $reg.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3510
llvm-svn: 207673
Summary:
The pattern sltu $r1, $r2, $imm is found in handwritten assembly which
is just a shorthand version of sltui $r1, $r2, $imm.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3508
llvm-svn: 207671
Summary:
The pattern dsll/dsrl $rd, $rt, $rs is found in handwritten assembly which
is just a shorthand version of dsllv/dsrlv $rd, $rt, $rs.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3486
llvm-svn: 207664
Summary:
The pattern sll/srl $rd, $rt, $rs is found in handwritten assembly which
is just a shorthand version of sllv/srlv $rd, $rt, $rs.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3483
llvm-svn: 207657
target cannot be determined accurately. This is the case for NaCl where the
sandboxing instructions are added in MC layer, after the MipsLongBranch pass.
It is also the case when the code has inline assembly. Instead of calculating
offset in the MipsLongBranch pass, use %hi(sym1 - sym2) and %lo(sym1 - sym2)
expressions that are resolved during the fixup.
This patch also deletes microMIPS test file test/CodeGen/Mips/micromips-long-branch.ll
and implements microMIPS CHECKs in a much simpler way in a file
test/CodeGen/Mips/longbranch.ll, together with MIPS32 and MIPS64.
llvm-svn: 207656
Summary:
This isn't supported directly so we rotate the vector by the desired number of
elements, insert to element zero, then rotate back.
The i64 case generates rather poor code on MIPS32. There is an obvious
optimisation to be made in future (do both insert.w's inside a shared
rotate/unrotate sequence) but for now it's sufficient to select valid code
instead of aborting.
Depends on D3536
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3537
llvm-svn: 207640
Summary:
This directive is used for setting up $gp in the beginning of a function.
It expands to three instructions if PIC is enabled:
lui $gp, %hi(_gp_disp)
addui $gp, $gp, %lo(_gp_disp)
addu $gp, $gp, $reg
_gp_disp is a special symbol that the linker sets to the distance between
the lui instruction and the context pointer (_gp).
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3480
llvm-svn: 207637
Summary:
The InstSE class already initializes Predicates to [HasStdEnc].
No functional change (confirmed by diffing tablegen-erated files before and
after)
Differential Revision: http://reviews.llvm.org/D3548
llvm-svn: 207558
Summary:
The InstSE class already initializes Predicates to [HasStdEnc].
No functional change (confirmed by diffing tablegen-erated files before and
after)
Differential Revision: http://reviews.llvm.org/D3547
llvm-svn: 207551
Summary:
The MipsPat class already initializes Predicates to [HasStdEnc].
No functional change (confirmed by diffing tablegen-erated files before and
after)
Differential Revision: http://reviews.llvm.org/D3546
llvm-svn: 207548
Summary:
This isn't supported directly so we splat the vector element and extract
the most convenient copy.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3530
llvm-svn: 207524
This is similar to the 'tail' marker, except that it guarantees that
tail call optimization will occur. It also comes with convervative IR
verification rules that ensure that tail call optimization is possible.
Reviewers: nicholas
Differential Revision: http://llvm-reviews.chandlerc.com/D3240
llvm-svn: 207143
For now it contains a single flag, SanitizeAddress, which enables
AddressSanitizer instrumentation of inline assembly.
Patch by Yuri Gorshenin.
llvm-svn: 206971
system headers above the includes of generated '.inc' files that
actually contain code. In a few targets this was already done pretty
consistently, but it wasn't done *really* consistently anywhere. It is
strictly cleaner IMO and necessary in a bunch of places where the
DEBUG_TYPE is referenced from the generated code. Consistency with the
necessary places trumps. Hopefully the build bots are OK with the
movement of intrin.h...
llvm-svn: 206838
behavior based on other files defining DEBUG_TYPE, which means it cannot
define DEBUG_TYPE at all. This is actually better IMO as it forces folks
to define relevant DEBUG_TYPEs for their files. However, it requires all
files that currently use DEBUG(...) to define a DEBUG_TYPE if they don't
already. I've updated all such files in LLVM and will do the same for
other upstream projects.
This still leaves one important change in how LLVM uses the DEBUG_TYPE
macro going forward: we need to only define the macro *after* header
files have been #include-ed. Previously, this wasn't possible because
Debug.h required the macro to be pre-defined. This commit removes that.
By defining DEBUG_TYPE after the includes two things are fixed:
- Header files that need to provide a DEBUG_TYPE for some inline code
can do so by defining the macro before their inline code and undef-ing
it afterward so the macro does not escape.
- We no longer have rampant ODR violations due to including headers with
different DEBUG_TYPE definitions. This may be mostly an academic
violation today, but with modules these types of violations are easy
to check for and potentially very relevant.
Where necessary to suppor headers with DEBUG_TYPE, I have moved the
definitions below the includes in this commit. I plan to move the rest
of the DEBUG_TYPE macros in LLVM in subsequent commits; this one is big
enough.
The comments in Debug.h, which were hilariously out of date already,
have been updated to reflect the recommended practice going forward.
llvm-svn: 206822
This enables TableGen to generate an additional two operand
matcher for our shift_rotate_imm and shift_rotate_reg class of instructions.
The tests were also updated so that they include now encoding information
for all affected instructions.
llvm-svn: 206398
This is so that EF_MIPS_NAN2008 is set if we are using IEEE 754-2008
NaN encoding (-mnan=2008). This patch also adds support for parsing
'.nan legacy' and '.nan 2008' assembly directives. The handling of
these directives should match GAS' behaviour i.e., the last directive
in use sets the ELF header bit (EF_MIPS_NAN2008).
Differential Revision: http://reviews.llvm.org/D3346
llvm-svn: 206396
Summary: This was a case of incorrect usage of hasMips64() vs isABI_N64()
Reviewers: matheusalmeida, dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3398
llvm-svn: 206388
This should fix the ninja-x64-msvc-RA-centos6 builder.
I suspect the check in MipsSubtarget.cpp is incorrect and is really trying to
check for a bare-metal target rather and anything other than linux. I'll
investigate this.
llvm-svn: 206385
if not in micromips mode.
The test (elf_st_other.ll) was renamed as the name and description didn't
make sense as the test wasn't checking any symbol table entry.
Differential Revision: http://reviews.llvm.org/D3346
llvm-svn: 206377
This patch re-introduces the MCContext member that was removed from
MCDisassembler in r206063, and requires that an MCContext be passed in at
MCDisassembler construction time. (Previously the MCContext member had been
initialized in an ad-hoc fashion after construction). The MCCContext member
can be used by MCDisassembler sub-classes to construct constant or
target-specific MCExprs.
This patch updates disassemblers for in-tree targets, and provides the
MCRegisterInfo instance that some disassemblers were using through the
MCContext (previously those backends were constructing their own
MCRegisterInfo instances).
llvm-svn: 206241
Summary:
This was another incorrect use of hasMips64() vs isGP64bit().
Depends on D3344
Reviewers: matheusalmeida, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3347
llvm-svn: 206187
Summary:
- Conditional moves acting on 64-bit GPR's should require MIPS-IV rather than MIPS64
- ISD::MUL, and ISD::MULH[US] should be lowered on all 64-bit ISA's
Patch by David Chisnall
His work was sponsored by: DARPA, AFRL
I've added additional testcases to cover as much of the codegen changes
affecting MIPS-IV as I can. Where I've been unable to find an existing
MIPS64 testcase that can be re-used for MIPS-IV (mainly tests covering
ISD::GlobalAddress and similar), I at least agree that MIPS-IV should
behave like MIPS64. Further testcases that are fixed by this patch will follow
in my next commit. The testcases from that commit that fail for MIPS-IV without
this patch are:
LLVM :: CodeGen/Mips/2010-07-20-Switch.ll
LLVM :: CodeGen/Mips/cmov.ll
LLVM :: CodeGen/Mips/eh-dwarf-cfa.ll
LLVM :: CodeGen/Mips/largeimmprinting.ll
LLVM :: CodeGen/Mips/longbranch.ll
LLVM :: CodeGen/Mips/mips64-f128.ll
LLVM :: CodeGen/Mips/mips64directive.ll
LLVM :: CodeGen/Mips/mips64ext.ll
LLVM :: CodeGen/Mips/mips64fpldst.ll
LLVM :: CodeGen/Mips/mips64intldst.ll
LLVM :: CodeGen/Mips/mips64load-store-left-right.ll
LLVM :: CodeGen/Mips/sint-fp-store_pattern.ll
Reviewers: dsanders
Reviewed By: dsanders
CC: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3343
llvm-svn: 206183
Summary:
Similarly, the HasMips64 on the 64-bit move InstAlias is a test for 64-bit
GPR's.
No functional change.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3263
llvm-svn: 205968
Summary:
It is now the smallest superset for these ISA's.
FeatureMips4 now contains FeatureFPIdx since [ls][dw]xc1 were added in MIPS-IV.
Made the FPIdx feature bit lowercase so that it can be used in the -mattr option.
Depends on D3274
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3275
llvm-svn: 205964
Summary:
They behave in accordance with the Has2008 and ABS2008 configuration bits of the processor which are used to select between the 1985 and 2008 versions of IEEE 754. In 1985 mode, these instructions are arithmetic (i.e. they raise invalid operation exceptions when given NaN), in 2008 mode they are non-arithmetic (i.e. they are copies).
nmadd.[ds], and nmsub.[ds] are still subject to -enable-no-nans-fp-math because the ISA spec does not explicitly state that they obey Has2008 and ABS2008.
Fixed the issue with the previous version of this patch (r205628). A pre-existing 'let Predicate =' statement was removing some predicates that were necessary for FP64 to behave correctly.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3274
llvm-svn: 205844
This patch adds the Octeon cnMips instructions seqi/snei and v3mulu/vmm0/vmulu.
It is only for the assembler. Test case is included.
Reviewed by: Daniel.Sanders@imgtec.com
llvm-svn: 205631
Summary:
They behave in accordance with the Has2008 and ABS2008 configuration bits of the
processor which are used to select between the 1985 and 2008 versions of IEEE
754. In 1985 mode, these instructions are arithmetic (i.e. they raise invalid
operation exceptions when given NaN), in 2008 mode they are non-arithmetic
(i.e. they are copies).
nmadd.[ds], and nmsub.[ds] are still subject to -enable-no-nans-fp-math because
the ISA spec does not explicitly state that they obey Has2008 and ABS2008.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3274
llvm-svn: 205628
Summary:
Adds the 'mips4' processor and a simple test of the ELF e_flags.
Patch by David Chisnall
His work was sponsored by: DARPA, AFRL
I made one small change to the testcase so that it uses
mips64-unknown-linux instead of mips4-unknown-linux.
This patch indirectly adds FeatureCondMov to FeatureMips64. This is ok
because it's supposed to be there anyway and it turns out that
FeatureCondMov is not a predicate of any instructions at the moment
(this is a bug that hasn't been noticed because there are no targets
without the conditional move instructions yet).
CC: theraven
Differential Revision: http://llvm-reviews.chandlerc.com/D3244
llvm-svn: 205530
%highest(sym1 - sym2 + const) relocations. Remove "ABS_" from VK_Mips_HI
and VK_Mips_LO enums in MipsMCExpr, to be consistent with VK_Mips_HIGHER
and VK_Mips_HIGHEST.
This change also deletes test file test/MC/Mips/higher_highest.ll and moves
its CHECK's to the new test file test/MC/Mips/higher-highest-addressing.s.
The deleted file tests that R_MIPS_HIGHER and R_MIPS_HIGHEST relocations are
emitted in the .o file. Since it uses -force-mips-long-branch option, it was
created when MipsLongBranch's implementation was emitting R_MIPS_HIGHER and
R_MIPS_HIGHEST relocations in the .o file. It was disabled when MipsLongBranch
started to directly calculate offsets.
Differential Revision: http://llvm-reviews.chandlerc.com/D3230
llvm-svn: 205522
Adds the instructions ext/ext32/cins/cins32.
It also changes pop/dpop to accept the two operand version and
adds a simple pattern to generate baddu.
Tests for the two operand versions (including baddu/dmul/dpop/pop)
and the code generation pattern for baddu are included.
Reviewed by: Daniel.Sanders@imgtec.com
llvm-svn: 205449
This is for consistency with other functions. The Parse* functions consume
tokens and the Match* functions don't.
No functional change.
llvm-svn: 205305
Summary:
This should fix the issues the D3222 caused in lld. Testcase is based on
the one that failed in the buildbot.
Depends on D3233
Reviewers: matheusalmeida, vmedic
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3234
llvm-svn: 205298
Summary:
Parsing registers no longer consume the $ token before it's confirmed whether it really has a register or not, therefore it's no longer impossible to match symbols if registers were tried first.
Depends on D3232
Reviewers: matheusalmeida, vmedic
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3233
llvm-svn: 205297
Summary:
Highlights:
- Registers are resolved much later (by the render method).
Prior to that point, GPR32's/GPR64's are GPR's regardless of register
size. Similarly FGR32's/FGR64's/AFGR64's are FGR's regardless of register
size or FR mode. Numeric registers can be anything.
- All registers are parsed the same way everywhere (even when handling
symbol aliasing)
- One consequence is that all registers can be specified numerically
almost anywhere (e.g. $fccX, $wX). The exception is symbol aliasing
but that can be easily resolved.
- Removes the need for the hasConsumedDollar hack
- Parenthesis and Bracket suffixes are handled generically
- Micromips instructions are parsed directly instead of going through the
standard encodings first.
- rdhwr accepts all 32 registers, and the following instructions that previously
xfailed now work:
ddiv, ddivu, div, divu, cvt.l.[ds], se[bh], wsbh, floor.w.[ds], c.ngl.d,
c.sf.s, dsbh, dshd, madd.s, msub.s, nmadd.s, nmsub.s, swxc1
- Diagnostics involving registers point at the correct character (the $)
- There's only one kind of immediate in MipsOperand. LSA immediates are handled
by the predicate and renderer.
Lowlights:
- Hardcoded '$zero' in the div patterns is handled with a hack.
MipsOperand::isReg() will return true for a k_RegisterIndex token
with Index == 0 and getReg() will return ZERO for this case. Note that it
doesn't return ZERO_64 on isGP64() targets.
- I haven't cleaned up all of the now-unused functions.
Some more of the generic parser could be removed too (integers and relocs
for example).
- insve.df needed a custom decoder to handle the implicit fourth operand that
was needed to make it parse correctly. The difficulty was that the matcher
expected a Token<'0'> but gets an Imm<0>. Adding an implicit zero solved this.
Reviewers: matheusalmeida, vmedic
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3222
llvm-svn: 205292
Summary:
Highlights:
- Registers are resolved much later (by the render method).
Prior to that point, GPR32's/GPR64's are GPR's regardless of register
size. Similarly FGR32's/FGR64's/AFGR64's are FGR's regardless of register
size or FR mode. Numeric registers can be anything.
- All registers are parsed the same way everywhere (even when handling
symbol aliasing)
- One consequence is that all registers can be specified numerically
almost anywhere (e.g. $fccX, $wX). The exception is symbol aliasing
but that can be easily resolved.
- Removes the need for the hasConsumedDollar hack
- Parenthesis and Bracket suffixes are handled generically
- Micromips instructions are parsed directly instead of going through the
standard encodings first.
- rdhwr accepts all 32 registers, and the following instructions that previously
xfailed now work:
ddiv, ddivu, div, divu, cvt.l.[ds], se[bh], wsbh, floor.w.[ds], c.ngl.d,
c.sf.s, dsbh, dshd, madd.s, msub.s, nmadd.s, nmsub.s, swxc1
- Diagnostics involving registers point at the correct character (the $)
- There's only one kind of immediate in MipsOperand. LSA immediates are handled
by the predicate and renderer.
Lowlights:
- Hardcoded '$zero' in the div patterns is handled with a hack.
MipsOperand::isReg() will return true for a k_RegisterIndex token
with Index == 0 and getReg() will return ZERO for this case. Note that it
doesn't return ZERO_64 on isGP64() targets.
- I haven't cleaned up all of the now-unused functions.
Some more of the generic parser could be removed too (integers and relocs
for example).
- insve.df needed a custom decoder to handle the implicit fourth operand that
was needed to make it parse correctly. The difficulty was that the matcher
expected a Token<'0'> but gets an Imm<0>. Adding an implicit zero solved this.
Reviewers: matheusalmeida, vmedic
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3222
llvm-svn: 205229
%got_hi, %got_lo, %call_hi, %call_lo, %higher, and %highest are now recognised
by MipsAsmParser::getVariantKind().
To prevent future issues with missing entries in this StringSwitch, I've added
an assertion to the default case.
llvm-svn: 205200
I started trying to fix a small issue, but this code has seen a small fix too
many.
The old code was fairly convoluted. Some of the issues it had:
* It failed to check if a symbol difference was in the some section when
converting a relocation to pcrel.
* It failed to check if the relocation was already pcrel.
* The pcrel value computation was wrong in some cases (relocation-pc.s)
* It was missing quiet a few cases where it should not convert symbol
relocations to section relocations, leaving the backends to patch it up.
* It would not propagate the fact that it had changed a relocation to pcrel,
requiring a quiet nasty work around in ARM.
* It was missing comments.
llvm-svn: 205076
Summary:
No functional change since these predicates are (currently) synonymous.
Extracted from a patch by David Chisnall
His work was sponsored by: DARPA, AFRL
Differential Revision: http://llvm-reviews.chandlerc.com/D3202
llvm-svn: 204943
Summary:
Patch by Robert N. M. Watson
His work was sponsored by: DARPA, AFRL
Small corrections by myself.
CC: theraven, matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3199
llvm-svn: 204924
of MCELFStreamer.
This is so that changes to MipsELFStreamer will automatically propagate through
its subclasses.
No functional changes (MipsELFStreamer has the same functionality of MCELFStreamer
at the moment).
Differential Revision: http://llvm-reviews.chandlerc.com/D3130
llvm-svn: 204918
This allows us to insert some hooks before emitting data into an actual object file.
For example, we can capture the register usage for a translation unit by overriding
the EmitInstruction method. The register usage information is needed to generate
.reginfo and .Mips.options ELF sections.
No functional changes.
Differential Revision: http://llvm-reviews.chandlerc.com/D3129
llvm-svn: 204917
Summary:
The short name is quite convenient so provide an accessor for them instead.
No functional change
Depends on D3177
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3178
llvm-svn: 204911
This enables TableGen to generate an additional two operand matcher
for our ArithLogicR class of instructions (constituted by 3 register operands).
E.g.: and $1, $2 <=> and $1, $1, $2
llvm-svn: 204826
parseDirectiveWord is a generic function that parses an expression which
means there's no need for it to have such an specific name. Renaming it to
parseDataDirective so that it can also be used to handle .dword directives[1].
[1]To be added in a follow up commit.
No functional changes.
llvm-svn: 204818
The '.set mips64' directive enables the feature Mips:FeatureMips64
from assembly. Note that it doesn't modify the ELF header as opposed
to the use of -mips64 from the command-line. The reason for this
is that we want to be as compatible as possible with existing assemblers
like GAS.
llvm-svn: 204817
The '.set mips64r2' directive enables the feature Mips:FeatureMips64r2
from assembly. Note that it doesn't modify the ELF header as opposed
to the use of -mips64r2 from the command-line. The reason for this
is that we want to be as compatible as possible with existing assemblers
like GAS.
llvm-svn: 204815
Given that we support multiple directives that enable a particular feature
(e.g. '.set mips16'), it's best to hoist that code into a new function
so that we don't repeat the same pattern w.r.t parsing and handling error cases.
No functional changes.
llvm-svn: 204811
After some discussion on IRC, emitting a call to the library function seems
like a better default, since it will move from a compiler internal error to
a linker error, that the user can work around until LLVM is fixed.
I'm also adding a note on the responsibility of the user to confirm that
the cache was cleared on platforms where nothing is done.
llvm-svn: 204806
The directive '.option pic2' enables PIC from assembly source.
At the moment none of the macros/directives check the PIC bit
but that's going to be fixed relatively soon. For example, the
expansion of macros like 'la' depend on the relocation model.
llvm-svn: 204803
Implementing the LLVM part of the call to __builtin___clear_cache
which translates into an intrinsic @llvm.clear_cache and is lowered
by each target, either to a call to __clear_cache or nothing at all
incase the caches are unified.
Updating LangRef and adding some tests for the implemented architectures.
Other archs will have to implement the method in case this builtin
has to be compiled for it, since the default behaviour is to bail
unimplemented.
A Clang patch is required for the builtin to be lowered into the
llvm intrinsic. This will be done next.
llvm-svn: 204802
Summary: Added test cases for O32 and N32 on MIPS64.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3175
llvm-svn: 204796
Summary:
Remove the XFAIL added in my previous commit and correct the test such that
it correctly tests the expansion of the assembler temporary.
Also added a test to check that $at is always $1 when written by the
user.
Corrected the new assembler temporary warnings so that they are emitted for
numeric registers too.
Differential Revision: http://llvm-reviews.chandlerc.com/D3169
llvm-svn: 204711
Summary:
The assembler temporary is normally $at ($1) but can be reassigned using
'.set at=$reg'. Regardless of which register is nominated as the assembler
temporary, $at remains $1 when written by the user.
Adds warnings under the following conditions:
* The register nominated as the assembler temporary is used by the user.
* '.set noat' is in effect and $at is used by the user.
Both of these only work for named registers. I have a follow up commit that makes it work for numeric registers as well.
XFAIL set-at-directive.s since it incorrectly tests that $at is redefined by
'.set at=$reg'. Testcases will follow in a separate commit.
Patch by David Chisnall
His work was sponsored by: DARPA, AFRL
Differential Revision: http://llvm-reviews.chandlerc.com/D3167
llvm-svn: 204710
Summary:
- If only two registers are passed to a three-register operation, then the
first argument is both source and destination register.
- If a non-register is passed as the last argument, generate the immediate
version of the instruction.
Also mark DADD commutative and add scheduling information (to the generic
scheduler), and implement DSUB.
Patch by David Chisnall
His work was sponsored by: DARPA, AFRL
CC: theraven
Differential Revision: http://llvm-reviews.chandlerc.com/D3148
llvm-svn: 204605
Summary:
VECTOR_SHUFFLE concatenates the vectors in an vectorwise fashion.
<0b00, 0b01> + <0b10, 0b11> -> <0b00, 0b01, 0b10, 0b11>
VSHF concatenates the vectors in a bitwise fashion:
<0b00, 0b01> + <0b10, 0b11> ->
0b0100 + 0b1110 -> 0b01001110
<0b10, 0b11, 0b00, 0b01>
We must therefore swap the operands to get the correct result.
The test case that discovered the issue was MultiSource/Benchmarks/nbench.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3142
llvm-svn: 204480
The Octeon cpu from Cavium Networks is mips64r2 based and has an extended
instruction set. In order to utilize this with LLVM, a new cpu feature "octeon"
and a subtarget feature "cnmips" is added. A small set of new instructions
(baddu, dmul, pop, dpop, seq, sne) is also added. LLVM generates dmul, pop and
dpop instructions with option -mcpu=octeon or -mattr=+cnmips.
llvm-svn: 204337
operator* on the by-operand iterators to return a MachineOperand& rather than
a MachineInstr&. At this point they almost behave like normal iterators!
Again, this requires making some existing loops more verbose, but should pave
the way for the big range-based for-loop cleanups in the future.
llvm-svn: 203865
Summary:
This is a white lie to workaround a widespread bug in the -mfp64
implementation.
The problem is that none of the 32-bit fpu ops mention the fact that they
clobber the upper 32-bits of the 64-bit FPR. This allows MTHC1 to be
scheduled on the wrong side of most 32-bit FPU ops, particularly MTC1.
Fixing that requires a major overhaul of the FPU implementation which can't
be done right now due to time constraints.
The testcase is SingleSource/Benchmarks/Misc/oourafft.c when given
TARGET_CFLAGS='-mips32r2 mfp64 -mmsa'.
Also correct the comment added in r203464 to indicate that two
instructions were affected.
Reviewers: matheusalmeida, jacksprat
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3029
llvm-svn: 203659
Summary:
Correct the match patterns and the lowerings that made the CodeGen tests pass despite the mistakes.
The original testcase that discovered the problem was SingleSource/UnitTests/SignlessType/factor.c in test-suite.
During review, we also found that some of the existing CodeGen tests were incorrect and fixed them:
* bitwise.ll: In bsel_v16i8 the IfSet/IfClear were reversed because bsel and bmnz have different operand orders and the test didn't correctly account for this. bmnz goes 'IfClear, IfSet, CondMask', while bsel goes 'CondMask, IfClear, IfSet'.
* vec.ll: In the cases where a bsel is emitted as a bmnz (they are the same operation with a different input tied to the result) the operands were in the wrong order.
* compare.ll and compare_float.ll: The bsel operand order was correct for a greater-than comparison, but a greater-than comparison instruction doesn't exist. Lowering this operation inverts the condition so the IfSet/IfClear need to be swapped to match.
The differences between BSEL, BMNZ, and BMZ and how they map to/from vselect are rather confusing. I've therefore added a note to MSA.txt to explain this in a single place in addition to the comments that explain each case.
Reviewers: matheusalmeida, jacksprat
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3028
llvm-svn: 203657
* Add masking instructions before indirect calls (in MC layer).
* Align call + branch delay to the bundle end (in MC layer).
Differential Revision: http://llvm-reviews.chandlerc.com/D3032
llvm-svn: 203606
* Add masking instructions before loads and stores (in MC layer).
* Add masking instructions after SP changes (in MC layer).
* Forbid loads, stores and SP changes in delay slots (in MI layer).
Differential Revision: http://llvm-reviews.chandlerc.com/D2904
llvm-svn: 203484
Summary:
This is a white lie to workaround a widespread bug in the -mfp64
implementation.
The problem is that none of the 32-bit fpu ops mention the fact that they
clobber the upper 32-bits of the 64-bit FPR. This allows MFHC1 to be
scheduled on the wrong side of most 32-bit FPU ops. Fixing that requires a
major overhaul of the FPU implementation which can't be done right now due to
time constraints.
MFHC1 is one of two affected instructions. These instructions are the only
FPU instructions that don't read or write the lower 32-bits. We therefore
pretend that it reads the bottom 32-bits to artificially create a dependency and
prevent the scheduler changing the behaviour of the code.
The other instruction is MTHC1 which will be fixed once I've have found a failing
test case for it.
The testcase is test-suite/SingleSource/UnitTests/Vector/simple.c when
given TARGET_CFLAGS="-mips32r2 -mfp64 -mmsa".
Reviewers: jacksprat, matheusalmeida
Reviewed By: jacksprat
Differential Revision: http://llvm-reviews.chandlerc.com/D2966
llvm-svn: 203464
The old system was fairly convoluted:
* A temporary label was created.
* A single PROLOG_LABEL was created with it.
* A few MCCFIInstructions were created with the same label.
The semantics were that the cfi instructions were mapped to the PROLOG_LABEL
via the temporary label. The output position was that of the PROLOG_LABEL.
The temporary label itself was used only for doing the mapping.
The new CFI_INSTRUCTION has a 1:1 mapping to MCCFIInstructions and points to
one by holding an index into the CFI instructions of this function.
I did consider removing MMI.getFrameInstructions completelly and having
CFI_INSTRUCTION own a MCCFIInstruction, but MCCFIInstructions have non
trivial constructors and destructors and are somewhat big, so the this setup
is probably better.
The net result is that we don't create temporary labels that are never used.
llvm-svn: 203204
Summary:
Previously, attempting to extract lanes 2 and 3 would actually extract lane 1.
The MSA CodeGen tests only covered lanes 0 and 1.
Differential Revision: http://llvm-reviews.chandlerc.com/D2935
llvm-svn: 202848
directly care about the Value class (it is templated so that the key can
be any arbitrary Value subclass), it is in fact concretely tied to the
Value class through the ValueHandle's CallbackVH interface which relies
on the key type being some Value subclass to establish the value handle
chain.
Ironically, the unittest is already in the right library.
llvm-svn: 202824
business.
This header includes Function and BasicBlock and directly uses the
interfaces of both classes. It has to do with the IR, it even has that
in the name. =] Put it in the library it belongs to.
This is one step toward making LLVM's Support library survive a C++
modules bootstrap.
llvm-svn: 202814
Summary:
Parts of the compiler still believed MSA load/stores have a 16-bit offset when
it is actually 10-bit. Corrected this, and fixed a closely related issue this
uncovered where load/stores with 10-bit and 12-bit offsets (MSA and microMIPS
respectively) could not load/store using offsets from the stack/frame pointer.
They accepted frameindex+offset, but not frameindex by itself.
Reviewers: jacksprat, matheusalmeida
Reviewed By: jacksprat
Differential Revision: http://llvm-reviews.chandlerc.com/D2888
llvm-svn: 202717
This fixes invalid lengths in .debug_aranges on big-endian mips64
(lengths appear to be left-shifted by 32 bits) and in .debug_loc.
Differential Revision: http://llvm-reviews.chandlerc.com/D2517
llvm-svn: 202716
* Align targets of indirect jumps to instruction bundle boundaries (in MI layer).
* Add masking instructions before indirect jumps (in MC layer).
Differential Revision: http://llvm-reviews.chandlerc.com/D2847
llvm-svn: 202479
Summary:
This should fix the MCJIT unit tests that were broken by r201792 on the MIPS buildbot.
MIPS currently uses the default implementation of sys::getHostCPUName() which
always returns "generic". For now, we will accept "generic" and coerce it to
"mips32" or "mips64" depending on the target architecture like we do for empty
CPU names.
Reviewers: jacksprat, matheusalmeida
Reviewed By: jacksprat
Differential Revision: http://llvm-reviews.chandlerc.com/D2878
llvm-svn: 202253
Summary:
This removes the need to coerce UnknownABI to the default ABI (O32 for
MIPS32, N64 for MIPS64 [*]) in both MipsSubtarget and MipsAsmParser.
Clang has been updated to disable both possible default ABI's before enabling
the ABI it intends to use.
[*] N64 being the default for MIPS64 is not actually correct.
However N32 is not fully implemented/tested yet.
Depends on: D2830
Reviewers: jacksprat, matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D2832
Differential Revision: http://llvm-reviews.chandlerc.com/D2846
llvm-svn: 201792
Summary:
This is consistent with the integrated assembler.
All mips64 codegen tests previously passed -mcpu. Removed -mcpu from
blez_bgez.ll and const-mult.ll to cover the default case.
Ideally, the two implementations of selectMipsCPU() will be merged but it's
proven difficult to find a home for the function that doesn't cause link errors.
For now, we'll hoist the common functionality into a function and mark it with
FIXME's.
Reviewers: jacksprat, matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D2830
llvm-svn: 201782
1) Fix a specific bug when certain conversion functions are called in a program compiled as mips16 with hard float and
the program is linked as c++. There are two libraries that are reversed in the link order with gcc/g++ and clang/clang++ for
mips16 in this case and the proper stubs will then not be called. These stubs are normally handled in the Mips16HardFloat pass
but in this case we don't know at that time that we need to generate the stubs. This must all be handled later in code generation
and we have moved this functionality to MipsAsmPrinter. When linked as C (gcc or clang) the proper stubs are linked in from libc.
2) Set up the infrastructure to handle 90% of what is in the Mips16HardFloat pass in this new area of MipsAsmPrinter. This is a more
logical place to handle this and we have known for some time that we needed to move the code later and not implement it using
inline asm as we do now but it was not clear exactly where to do this and what mechanism should be used. Now it's clear to us
how to do this and this patch contains the infrastructure to move most of this to MipsAsmPrinter but the actual moving will be done
in a follow on patch. The same infrastructure is used to fix this current bug as described in #1. This change was requested by the list
during the original putback of the Mips16HardFloat pass but was not practical for us do at that time.
llvm-svn: 201426
Matheus Almeida