First support for this feature was committed in r259784. Support for
loop invariant load hoisting with different types was added by
Johannes Doerfert in r260045 and r260886.
llvm-svn: 260965
A load can only be invariant if its base pointer is invariant too. To
this end, we check if the base pointer is defined inside the region or
outside. In the former case we recursively check if we can (and
therefore will) hoist the base pointer too. Only if that happends we
can hoist the load.
llvm-svn: 260886
This reverts commit 98efa006c96ac981c00d2e386ec1102bce9f549a.
The fix was broken since we do not use AA in the ScopDetection anymore to
check for invariant accesses.
llvm-svn: 260884
Eliminate the global variable "InsnToMemAcc" to make Scop/ScopInfo become
more protable, such that we can safely use them in a CallGraphSCC pass.
Differential Revision: http://reviews.llvm.org/D17238
llvm-svn: 260863
Before this patch it could happen that we did not hoist a load that
was a base pointer of another load even though AA already declared the
first one as invariant (during ScopDetection). If this case arises we
will now skipt the "can be overwriten" check because in this case the
over-approximating nature causes us to generate broken code.
llvm-svn: 260862
The former ScopArrayInfo::updateSizes was implicitly divided into an
updateElementType and an updateSizes. Now this partitioning is
explicit.
llvm-svn: 260860
So far we separated constant factors from multiplications, however,
only when they are at the outermost level of a parameter SCEV. Now,
we also separate constant factors from the parameter SCEV if the
outermost expression is a SCEVAddRecExpr. With the changes to the
SCEVAffinator we can now improve the extractConstantFactor(...)
function at will without worrying about any other code part. Thus,
if needed we can implement a more comprehensive
extractConstantFactor(...) function that will traverse the SCEV
instead of looking only at the outermost level.
Four test cases were affected. One did not change much and the other
three were simplified.
llvm-svn: 260859
This reverts commit https://llvm.org/svn/llvm-project/polly/trunk@260853
We unfortunately still have two bugs left which show only up with
-polly-process-unprofitable and which I forgot to test before committing.
llvm-svn: 260854
First support for this feature was committed in r259784. Support for
loop invariant load hoisting with different types was added by Johannes
Doerfert in r260045. This fixed the last known bug.
llvm-svn: 260853
Since the origin AccFuncMap in ScopInfo is used by the underlying Scop
only, and it must stay alive until we delete the Scop. It will be better
if we simply move the origin AccFuncMap in ScopInfo into the Scop class.
llvm-svn: 260820
Make Scop become more portable such that we can use it in a CallGraphSCC pass.
The first step is to drop the analyses that are only used during Scop construction.
This patch drop LoopInfo from Scop.
llvm-svn: 260819
Make Scop become more portable such that we can use it in a CallGraphSCC pass.
The first step is to drop the analyses that are only used during Scop construction.
This patch drop DominatorTree from Scop.
llvm-svn: 260818
Make Scop become more portable such that we can use it in a CallGraphSCC pass.
The first step is to drop the analyses that are only used during Scop construction.
This patch drop ScopDecection from Scop.
llvm-svn: 260817
We now distinguish invariant loads to the same memory location if they
have different types. This will cause us to pre-load an invariant
location once for each type that is used to access it. However, we can
thereby avoid invalid casting, especially if an array is accessed
though different typed/sized invariant loads.
This basically reverts the changes in r260023 but keeps the test
cases.
llvm-svn: 260045
We also disable this feature by default, as there are still some issues in
combination with invariant load hoisting that slipped through my initial
testing.
llvm-svn: 260025
Invariant load hoisting of memory accesses with non-canonical element
types lacks support for equivalence classes that contain elements of
different width/size. This support should be added, but to get our buildbots
back to green, we disable load hoisting for memory accesses with non-canonical
element size for now.
llvm-svn: 260023
Always use access-instruction pointer type to load the invariant values.
Otherwise mismatches between ScopArrayInfo element type and memory access
element type will result in invalid casts. These type mismatches are after
r259784 a lot more common and also arise with types of different size, which
have not been handled before.
Interestingly, this change actually simplifies the code, as we now have only
one code path that is always taken, rather then a standard code path for the
common case and a "fixup" code path that replaces the standard code path in
case of mismatching types.
llvm-svn: 260009
The previously implemented approach is to follow value definitions and
create write accesses ("push defs") while searching for uses. This
requires the same relatively validity- and requirement conditions to be
replicated at multiple locations (PHI instructions, other instructions,
uses by PHIs).
We replace this by iterating over the uses in a SCoP ("pull in
requirements"), and add writes only when at least one read has been
added. It turns out to be simpler code because each use is only iterated
over once and writes are added for the first access that reads it. We
need another iteration to identify escaping values (uses not in the
SCoP), which also makes the difference between such accesses more
obvious. As a side-effect, the order of scalar MemoryAccess can change.
Differential Revision: http://reviews.llvm.org/D15706
llvm-svn: 259987
This allows code such as:
void multiple_types(char *Short, char *Float, char *Double) {
for (long i = 0; i < 100; i++) {
Short[i] = *(short *)&Short[2 * i];
Float[i] = *(float *)&Float[4 * i];
Double[i] = *(double *)&Double[8 * i];
}
}
To model such code we use as canonical element type of the modeled array the
smallest element type of all original array accesses, if type allocation sizes
are multiples of each other. Otherwise, we use a newly created iN type, where N
is the gcd of the allocation size of the types used in the accesses to this
array. Accesses with types larger as the canonical element type are modeled as
multiple accesses with the smaller type.
For example the second load access is modeled as:
{ Stmt_bb2[i0] -> MemRef_Float[o0] : 4i0 <= o0 <= 3 + 4i0 }
To support code-generating these memory accesses, we introduce a new method
getAccessAddressFunction that assigns each statement instance a single memory
location, the address we load from/store to. Currently we obtain this address by
taking the lexmin of the access function. We may consider keeping track of the
memory location more explicitly in the future.
We currently do _not_ handle multi-dimensional arrays and also keep the
restriction of not supporting accesses where the offset expression is not a
multiple of the access element type size. This patch adds tests that ensure
we correctly invalidate a scop in case these accesses are found. Both types of
accesses can be handled using the very same model, but are left to be added in
the future.
We also move the initialization of the scop-context into the constructor to
ensure it is already available when invalidating the scop.
Finally, we add this as a new item to the 2.9 release notes
Reviewers: jdoerfert, Meinersbur
Differential Revision: http://reviews.llvm.org/D16878
llvm-svn: 259784
Even though the commands still work, dragonegg has not been updated to work with
recent versions of LLVM. Consequently, only very old Polly versions (which we
do not support any more), can be used in this way.
This simplifies our documentation page.
llvm-svn: 259758
This includes some (optional) improvements to the isl scheduler, which we do not
use yet, as well as a fix for a bug previously also affecting Polly:
commit 662ee9b7d45ebeb7629b239d3ed43442e25bf87c
Author: Sven Verdoolaege <skimo@kotnet.org>
Date: Mon Jan 25 16:59:32 2016 +0100
isl_basic_map_realign: perform Gaussian elimination on result
Many parts of isl assume that Gaussian elimination has been
applied to the equality constraints. In particular singleton_extract_point
makes this assumption. The input to singleton_extract_point
may have undergone parameter alignment. This parameter alignment
(ultimately performed by isl_basic_map_realign) therefore
needs to make sure the result preserves this property
llvm-svn: 259757
We remove information for older versions of Polly and also shorten the overall
text. This should make it a lot easier for people to get to the important code
wight away.
llvm-svn: 259658
We support now code such as:
void multiple_types(char *Short, char *Float, char *Double) {
for (long i = 0; i < 100; i++) {
Short[i] = *(short *)&Short[2 * i];
Float[i] = *(float *)&Float[4 * i];
Double[i] = *(double *)&Double[8 * i];
}
}
To support such code we use as element type of the modeled array the smallest
element type of all original array accesses. Accesses with larger types are
modeled as multiple accesses with the smaller type.
For example the second load access is modeled as:
{ Stmt_bb2[i0] -> MemRef_Float[o0] : 4i0 <= o0 <= 3 + 4i0 }
To support jscop-rewritable memory accesses we need each statement instance to
only be assigned a single memory location, which will be the address at which
we load the value. Currently we obtain this address by taking the lexmin of
the access function. We may consider keeping track of the memory location more
explicitly in the future.
llvm-svn: 259587
We create separate functions for fixed-size multi-dimensional, parameteric-sized
multi-dimensional, as well as single-dimensional memory accesses to reduce the
complexity of a large monolithic function.
Suggested-by: Michael Kruse <llvm@meinersbur.de>
llvm-svn: 259522
There is no need to pass the size of the elements as the last size dimension
to ScopArrayInfo. This information is already available through the ElementType.
Tracking it twice is not only redundant but may result in inconsistencies.
llvm-svn: 259521
Tobias Grosser