For some time, eclipse (CDT) uses full path of the file in break-insert command
when putting breakpoint on a source line. On windows, a typical command looks
like the following.
56-break-insert -f F:\\work\\ws\\test\\main.c:49
Current implementation in lldb-mi have problem in 2 ways.
1. It was assuming that there will be only one : in the path which is wrong if full
path is supplied.
2. CDT sends out path with double backslashes in windows which gives error on
resolution.
Fixed the : issue in lldb-mi. Changed FileSpec::Normalize to make sure that it
handles the path with \\ correctly. Added test cases to check for full path in
both lldb-mi and lldb. Also added a test case to check SBFileSpec with double
slashes.
llvm-svn: 228538
* Set the state of the process into running/stepping on continue/step operations
* Add mutex to use transactions in Thread State Coordinator
** It is required because the events from two Signal Handler or form a Signal handler and a Resume request shouldn't overlap
* Send Stop Replay Packet only when the state of the process changed
Differential Revision: http://reviews.llvm.org/D7374
llvm-svn: 228387
Summary:
This commit adds a new open flag File::eOpenOptionCloseOnExec (i.e., O_CLOEXEC), and adds it to
the list of flags when opening log files (#ifndef windows). A regression test is included.
Reviewers: vharron, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7412
llvm-svn: 228310
This was causing code that opened multiple targets to try and get a path to debugserver from the GDB remote communication class, and it would get the LLDB path and some instances would return empty strings and it would cause debugserver to not be found.
<rdar://problem/18756927>
llvm-svn: 227935
create its own threads with 8MB additional maximum stack size.
Extra room is needed for the bookkeeping needed for this
instrumentation.
llvm-svn: 227421
Other platforms may benefit from something similar if issues arise. The
libedit library doesn't explicitly initialize the curses termcap library,
which it gets away with until TERM is set to VT100 where it stumbles over
an implementation assumption that may not exist on other platforms.
<rdar://problem/17581929>
llvm-svn: 226891
buffer and to add a nul terminator byte, was incorrectly resizing
its buffer so the nul terminator was not included.
Problem found by clang ASAN instrumentation when using an
expression prefix file which was read via this mechanism.
<rdar://problem/19556459>
llvm-svn: 226753
Since REG_ENHANCED is available on MacOSX, this allow the use of \d (digits) \b (word boundaries) and much more without affecting other systems.
<rdar://problem/12082562>
llvm-svn: 226704
lldb::pid_t
Host::LaunchApplication (const FileSpec &app_file_spec);
This had use of a function FSPathMakeRef(const UInt8*, FSRef *, ...) that was deprecated in 10.8.
Removing this fucntion since it wasn't used and was causing warnings.
llvm-svn: 226608
so it doesn't assume that the SmallVector<char> will have
nul terminator. It did not in at least one case.
Caught by ASAN instrumentation.
llvm-svn: 226544
This function returns a URI of the resource that the connection is connected to. This is especially important for connections established by accepting a connection from a remote host.
Also added implementations for ConnectionMachPort, ConnectionSharedMemory,
Also fixed up some documentation in Connection::Write
Renamed ConnectionFileDescriptorPosix::SocketListen to ConnectionFileDescriptorPosix::SocketListenAndAccept
Fixed a log message in Socket.cpp
Differential Review: http://reviews.llvm.org/D7026
llvm-svn: 226362
The refactor was motivated by some comments that Greg made
http://reviews.llvm.org/D6918
and also to break a dependency cascade that caused functions linking
in string->int conversion functions to pull in most of lldb
llvm-svn: 226199
This fixes compilation failures in the 64-bit build of LLDB on Windows.
Patch by Aidan Dodds
Differential Revision: http://reviews.llvm.org/D6704
llvm-svn: 224528
This patch makes a number of improvements to the Pipe interface.
1) An interface (PipeBase) is provided which exposes pure virtual
methods for any implementation of Pipe to override. While not
strictly necessary, this helps catch errors where the interfaces
are out of sync.
2) All methods return lldb_private::Error instead of returning bool
or void. This allows richer error information to be propagated
up to LLDB.
3) A new ReadWithTimeout() method is exposed in the base class and
implemented on Windows.
4) Support for both named and anonymous pipes is exposed through the
base interface and implemented on Windows. For creating a new
pipe, both named and anonymous pipes are supported, and for
opening an existing pipe, only named pipes are supported.
New methods described in points #3 and #4 are stubbed out on posix,
but fully implemented on Windows. These should be implemented by
someone on the linux / mac / bsd side.
Reviewed by: Greg Clayton, Oleksiy Vyalov
Differential Revision: http://reviews.llvm.org/D6686
llvm-svn: 224442
When running the test suite on Windows, we can't have Windows popping
up dialogs when LLDB crashes in native code because it will hang
the test suite. This patch silences those dialogs by checking an
environment variable at startup and configuring Windows based on
its value.
This patch also adds an environment variable to force inferiors to
never spawn in their own console window. This is useful to prevent
new window spawm when running the test suite.
Reviewed by: Scott Graham
Differential Revision: http://reviews.llvm.org/D6628
llvm-svn: 224137
This is a resubmit of r223548, which was reverted due to breaking
tests on Linux and Mac.
This resubmit fixes the reason for the revert by adding back some
accidentally removed code which appends -c to the command line
when running /bin/sh.
This resubmit also differs from the original patch in that it sets
the architecture on the ProcessLaunchInfo. A follow-up patch will
refactor this to separate the logic for different platforms.
Differential Revision: http://reviews.llvm.org/D6553
Reviewed By: Greg Clayton
llvm-svn: 223695
like tgmath.h and stdarg.h into the LLDB installation,
and then finding them through the Host infrastructure.
Also add a script to actually do this on Mac OS X.
llvm-svn: 223430
(e.g. breakpoints, stop-hooks) before we have any targets - for instance in
your ~/.lldbinit file. These will then get copied over to any new targets
that get created. So far, you can only make stop-hooks.
Breakpoints will have to learn to move themselves from target to target for
us to get them from no-target to new-target.
We should also make a command & SB API way to prime this ur-target.
llvm-svn: 222600
Previously using HostThread::GetNativeThread() required an ugly
cast to most-derived type. This solves the issue by simply returning
the derived type directly.
llvm-svn: 222185
Editline does not work correctly on Windows. This goes back at
least to r208369, and as a result r210105 was submitted to disable
libedit at runtime on Windows.
More recently, r222163 was submitted which re-writes editline
entirely, but makes the situation even worse on Windows, to the
point that it doesn't even compile. While it would be easy to
fix the compilation failure, this patch simply stops compiling
Editline entirely on Windows, as the simple compilation fix would
still result in a broken use of select on Windows, and as such a
broken implementation of Editline.
Since Editline was already disabled to begin with on Windows, we
don't attempt to fix the compilation failure or the underlying
issues, and instead just disable it "even more".
llvm-svn: 222177
Fixed include:
- Change Platform::ResolveExecutable(...) to take a ModuleSpec instead of a FileSpec + ArchSpec to help resolve executables correctly when we have just a path + UUID (no arch).
- Add the ability to set the listener in SBLaunchInfo and SBAttachInfo in case you don't want to use the debugger as the default listener.
- Modified all places that use the SBLaunchInfo/SBAttachInfo and the internal ProcessLaunchInfo/ProcessAttachInfo to not take a listener as a parameter since it is in the launch/attach info now
- Load a module's sections by default when removing a module from a target. Since we create JIT modules for expressions and helper functions, we could end up with stale data in the section load list if a module was removed from the target as the section load list would still have entries for the unloaded module. Target now has the following functions to help unload all sections a single or multiple modules:
size_t
Target::UnloadModuleSections (const ModuleList &module_list);
size_t
Target::UnloadModuleSections (const lldb::ModuleSP &module_sp);
llvm-svn: 222167
Improvements include:
* Use of libedit's wide character support, which is imperfect but a distinct improvement over ASCII-only
* Fallback for ASCII editing path
* Support for a "faint" prompt clearly distinguished from input
* Breaking lines and insert new lines in the middle of a batch by simply pressing return
* Joining lines with forward and backward character deletion
* Detection of paste to suppress automatic formatting and statement completion tests
* Correctly reformatting when lines grow or shrink to occupy different numbers of rows
* Saving multi-line history, and correctly preserving the "tip" of history during editing
* Displaying visible ^C and ^D indications when interrupting input or sending EOF
* Fledgling VI support for multi-line editing
* General correctness and reliability improvements
llvm-svn: 222163
relative paths, like:
/whatever/llvm/lib/Sema/../../include/llvm/Sema/
That causes problems with our type uniquing, since we use the declaration file
and line as one component of the uniquing, and different ways of getting to the
same file will have different directory spellings, though they are functionally
equivalent. We end up with two copies of the exact same type because of this,
and that makes the expression parser give "duplicate type" errors.
I added a method to resolve paths with ../ in them and used that in the FileSpec::Equals,
for comparing Declarations and for doing Breakpoint compares as well, since they also
suffer from this if you specify breakpoints by full path (since nobody knows what
../'s to insert...)
<rdar://problem/18765814>
llvm-svn: 222075
In the llgs world, ProcessWindows will eventually go away and
we'll implement a different protocol. This patch decouples
ProcessWindows from the core debug loop so that this transition
will not be more difficult than it needs to be.
llvm-svn: 221405
Summary:
Instead of using a homegrown solution to get the auxv from a process, instead
use the OS-provided sysctl to get the needed data. This allows the same code to
be used for both 32-bit and 64-bit processes on a 64-bit host.
Reviewers: emaste
Reviewed By: emaste
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D6071
llvm-svn: 221063
Summary:
Ed Maste found some problems with the commit in D5988. Address most of these.
While here, also add floating point return handling. This doesn't handle
128-bit long double yet. Since I don't have any system that uses it, I don't
currently have plans to implement it.
Reviewers: emaste
Reviewed By: emaste
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D6049
llvm-svn: 220963
Summary:
This adds preliminary support for PowerPC/PowerPC64, for FreeBSD. There are
some issues still:
* Breakpoints don't work well on powerpc64.
* Shared libraries don't yet get loaded for a 32-bit process on powerpc64 host.
* Backtraces don't work. This is due to PowerPC ABI using a backchain pointer
in memory, instead of a dedicated frame pointer register for the backchain.
* Breakpoints on functions without debug info may not work correctly for 32-bit
powerpc.
Reviewers: emaste, tfiala, jingham, clayborg
Reviewed By: clayborg
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D5988
llvm-svn: 220944
HostThreadWindows::Join() did not call the Reset as is done by
the HostThreadPosix::Join(). As a result, future call to
IsJoinable() can fail.
Committed as obvious.
llvm-svn: 220651
After the recent migration of code out of Host.cpp, many
unnecessary headers were still being included. This prunes the
include list down to only what is still necessary.
llvm-svn: 219814
This implements Host::LaunchProcess for windows, and in doing so
does some minor refactor to move towards a more modular process
launching design.
The original motivation for this is that launching processes on
windows needs some very windows specific code, which would live
most appropriately in source/Host/windows somewhere. However,
there is already some common code that all platforms use when
launching a process before delegating to the platform specific
stuff, which lives in source/Host/common/Host.cpp which would
be nice to reuse without duplicating.
This commonality has been abstracted into MonitoringProcessLauncher,
a class which abstracts out the notion of launching a process using
an arbitrary algorithm, and then monitoring it for state changes.
The windows specific launching code lives in ProcessLauncherWindows,
and the posix specific launching code lives in ProcessLauncherPosix.
When launching a process MonitoringProcessLauncher is created, and
then an appropriate delegate launcher is created and given to the
MonitoringProcessLauncher.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D5781
llvm-svn: 219731
Python one-line execution was using ConnectionFileDescriptor to do
a non-blocking read against a pipe. This won't work on Windows,
as CFD is implemented using select(), and select() only works with
sockets on Windows.
The solution is to use ConnectionGenericFile on Windows, which uses
the native API to do overlapped I/O on the pipe. This in turn
requires re-implementing Host::Pipe on Windows using native OS
handles instead of the more portable _pipe CRT api.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D5679
llvm-svn: 219339
This is the first step in getting ConnectionFileDescriptor ported
to Windows. It implements a connection against a disk file for
windows. This supports connection strings of the form file://PATH
which are currently supported only on posix platforms in
ConnectionFileDescriptor.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D5608
llvm-svn: 219145
As part of getting ConnectionFileDescriptor working on Windows,
there is going to be alot of platform specific work to be done.
As a result, the implementation is moving into Host. This patch
performs the code move and fixes up call-sites appropriately.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D5548
llvm-svn: 219143
See http://reviews.llvm.org/D5495 for more details.
These are changes that are part of an effort to support building llgs, within the AOSP source tree, using the Android.mk
build system, when using the llvm/clang/lldb git repos from AOSP replaced with the experimental ones currently in
github.com/tfiala/aosp-{llvm,clang,lldb,compiler-rt}.
llvm-svn: 218568
Changes include:
- fix it so you can select the "host" platform using "platform select host"
- change all callbacks that create platforms to returns shared pointers
- fix TestImageListMultiArchitecture.py to restore the "host" platform by running "platform select host"
- Add a new "PlatformSP Platform::Find(const ConstString &name)" method to get a cached platform
- cache platforms that are created and re-use them instead of always creating a new one
llvm-svn: 218145
anyway /Vol doesn't complete correctly either. Somehow we're chopping the names
up incorrectly before passing them into the completer.
llvm-svn: 217720
* Fixes the local stack variable return pointer usage in NativeThreadLinux::GetName().
* Changes NativeThreadProtocol::GetName() to return a std::string.
* Adds a unit test to verify thread names don't regress in the future. Currently only run on Linux since I know default thread names there.
llvm-svn: 217717
* Sends a SIGSTOP to the process.
* Fixes busted SIGSTOP handling. Now builds a list of non-stopped
that we wait for the PTRACE group-stop for. When the final must-stop
tid gets its group stop, we propagate the process state change.
Only the signal receiving the notification of the pending SIGSTOP
is marked with the SIGSTOP signal. All the rest, if they weren't
already stopped, are marked as stopped with signal 0.
* Fixes a few broken tests.
* Marks the Linux test I added earlier as expect-pass (no longer XFAIL).
Implements fix for http://llvm.org/bugs/show_bug.cgi?id=20908.
llvm-svn: 217647
SetName is only used in LLDB to set a thead's own name. Move it there
to match OS X and Windows and slightly reduce the effort in any future
HostThread/ThisThread name refactoring.
llvm-svn: 217521
More work on the GetName/SetName arguments (thread_t vs tid_t) is needed
but this change should restore the build and basic operation.
llvm-svn: 217502
This patch moves creates a thread abstraction that represents a
thread running inside the LLDB process. This is a replacement for
otherwise using lldb::thread_t, and provides a platform agnostic
interface to managing these threads.
Differential Revision: http://reviews.llvm.org/D5198
Reviewed by: Jim Ingham
llvm-svn: 217460
This makes sure that nothing that requires Python is being built
when the LLDB_DISABLE_PYTHON flag is being passed in.
It also changes a use of CPPFLAGS to CPP.Flags since the former is overridden
when external flags are passed in while the later is not. I'm not sure exactly
why LLDB_DISABLE_PYTHON is in CXXFLAGS rather than CPPFLAGS,
but cleaning that up is for another commit.
Differential Revision: http://reviews.llvm.org/D4918
llvm-svn: 217414
See http://reviews.llvm.org/D5108 for details.
This change does the following:
* eliminates the Process::GetUnixSignals() virtual method and replaces with a fixed getter.
* replaces the Process UnixSignals storage with a shared pointer.
* adds a Process constructor variant that can be passed the UnixSignalsSP. When the constructor without the UnixSignalsSP is specified, the Host's default UnixSignals is used.
* adds a host-specific version of GetUnixSignals() that is used when we need the host's appropriate UnixSignals variant.
* replaces GetUnixSignals() overrides in PlatformElfCore, ProcessGDBRemote, ProcessFreeBSD and ProcessLinux with code that appropriately sets the Process::UnixSignals for the process.
This change also enables some future patches that will enable llgs to be used for local Linux debugging.
llvm-svn: 216748
For hosts that cannot support long thread names, shrink the host
wait4 thread name so that it does not truncate the PID in the thread name.
Change by Shawn Best.
llvm-svn: 216686
This change:
* properly captures execs in NativeProcessLinux.
* clears out all non-main-thread thread metadata in NativeProcessLinux on exec.
* adds a DidExec() method to the NativeProcessProtocol delegate.
* clears out the auxv data cache when we exec (on Linux).
This is a small part of the llgs for local Linux debugging work going on here:
https://github.com/tfiala/lldb/tree/dev-llgs-local
I'm breaking it into small patches.
llvm-svn: 216670
This is a lightweight wrapper around a pid. It is intended to be
lightweight enough to serve as a replacement anywhere we currently
store a pid. It provides convenience methods and common process
operations.
This patch does not yet make use of HostProcess anywhere.
llvm-svn: 216607
LLDB had implemented its own DynamicLibrary class for plugin
support. LLVM has an equivalent mechanism, so this patch deletes
the duplicated code in LLDB and updates LLDB to reference the
mechanism provided by LLVM.
llvm-svn: 216606
When building without XCode on sytems where these constants are
not in the system header (or I presume with older versions of XCode),
these are needed to make this file compile, since unlike most other
uses of MachO specific constants, these use the system headers
rather than the LLVM-defined ones.
llvm-svn: 216332
This should bring HostInfo up to 99% completion. The remainder
of code in Host will be split into instantiatable classes
representing host processes, threads, dynamic libraries, and
process launching strategies.
llvm-svn: 216230
This continues the effort to get Host code moved over to HostInfo,
and removes many more instances of preprocessor defines along the
way.
llvm-svn: 216195
inside classes as static local variables and remove the static
ivars. Subclasses should use the accessor functions."
This change moved global statics to function local statics, but
forgot to make the locals static in the function, breaking all
platforms. Furthermore, MSVC doesn't support thread-safe function
local statics, so any use of a function local static on non
primitive types is undefined behavior on MSVC.
Reverting due to the fact that it's broken on all platforms, but
would like to have a discussion about the thread-safety issue
before it goes back in.
llvm-svn: 216123
This patch creates a HostInfo class, a static class used to answer
basic queries about the host platform. As part of this change,
some functionality is moved from Host to HostInfo, and relevant
fixups are performed in the rest of the codebase.
This is part of a larger effort to isolate more code in the Host
layer into platform-specific groups, to make it easier to make
platform specific changes for a particular Host without breaking
other hosts.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D4963
llvm-svn: 215992
Previously lldbHost was built as multiple static libraries such as
lldbHostCommon, lldbHostLinux, etc. With this patch, the CMake
build produces only a single static library, lldbHost, whose file
set is dynamically created based on the platform.
llvm-svn: 215792
More specifically, this change can be summarized as follows:
1) Makes an lldbHostPosix library which contains code common to
all posix platforms.
2) Creates Host/FileSystem.h which defines a common FileSystem
interface.
3) Implements FileSystem.h in Host/windows and Host/posix.
4) Creates Host/FileCache.h, implemented in Host/common, which
defines a class useful for storing handles to open files needed
by the debugger.
Differential Revision: http://reviews.llvm.org/D4889
llvm-svn: 215775
Fixes include:
1 - added new FileSpec method: bool FileSpec::Readable()
2 - detect when an executable is not readable and give an appropriate error for:
(lldb) file /tmp/unreadablefile
3 - detect when a core file is not readable and give an appropriate error
4 - detect when a specified core file doesn't exist and give an appropriate error
<rdar://problem/17727734>
llvm-svn: 215741
FileAction was previously a nested class in ProcessLaunchInfo.
This led to some unfortunate style consequences, such as requiring
the AddPosixSpawnFileAction() funciton to be defined in the Target
layer, instead of the more appropriate Host layer. This patch
makes FileAction its own independent class in the Target layer,
and then moves AddPosixSpawnFileAction() into Host as a result.
Differential Revision: http://reviews.llvm.org/D4877
llvm-svn: 215649
This patch adds the notion of a "path syntax" to FileSpec. There
are two syntaxes (Posix and Windows) and one "meta syntax",
Host Native, which uses the current platform to figure out the
appropriate syntax for host paths.
This allows paths from one platform to be represented and
manipulated on another platform even if they have different path
syntaxes.
llvm-svn: 215123
This patch moves the logic of many common socket operations into
its own class lldb_private::Socket. It then modifies the
ConnectionFileDescriptor class, and a few users of that class,
to use this new Socket class instead of hardcoding socket logic
directly.
Finally, this patch creates a common interface called IOObject for
any objects that support reading and writing, so that endpoints
such as sockets and files can be treated the same.
Differential Revision: http://reviews.llvm.org/D4641
Reviewed by: Todd Fiala, Greg Clayton
llvm-svn: 214984
Also fixed the host 32 and 64 bit arch to return "x86_64-apple-macosx" again instead of "x86_64-apple-" (unspecified OS) after recent changes.
<rdar://problem/17845078>
llvm-svn: 214223
Assuming that the user's home directory is at ~ is incorrect on
Windows. This patch delegates the request to LLVM's support
library, which already provides a cross-platform implementation
of this function.
Differential Revision: http://reviews.llvm.org/D4674
llvm-svn: 214093
This change enables lldb-platform for Linux. In addition, it does the following:
* fixes Host::GetLLDBPath() to work on Linux/*BSD for ePathTypeSupportExecutableDir-relative paths.
* adds more logging and comments around lldb-platform startup and remote lldb-platform usage.
* refactors lldb-platform remote-* support for Darwin and Linux into PlatformPOSIX. This, in theory, is the bulk of what is needed for *BSD to make remote connections to lldb-platform as well (although I haven't tested that yet). FreeBSD can make similar changes to their Platform* as was made here for PlatformLinux to pick up the rest of the bits.
* teaches GDBRemoteCommunication to use lldb-gdbserver for non-Apple hosts.
llvm-svn: 213707
reinterpret_cast may not convert a pointer-to-function to a
void-pointer. Take a detour through intptr_t and *then* convert to a
pointer-to-function.
This silences a warning emitted by GCC when building LLDB.
Differential Revision: http://reviews.llvm.org/D4631
llvm-svn: 213693
lldb -P, which outputs its python path, works by using Host-layer
facilities to get information about the loaded python module. This
Host functionality was unimplemented on Windows, so this patch
implements it. Additionally, it removes a pexpect dependency from
the test runner and uses an equivalent invocation of subprocess.
Reviewed by: Todd Fiala
Differential Revision: http://reviews.llvm.org/D4548
llvm-svn: 213410
Fix the warning the correct way without making things crash when ENABLE_MUTEX_ERROR_CHECKING is non enabled.
<rdar://problem/17703039>
llvm-svn: 213394
This value gets set to a max uint32_t value when there is no known limit; otherwise,
it is set to a value appropriate for the platform. For the moment, only
Linux, FreeBSD and NetBSD set it to 16. All other platforms set it to
the max uint32_t value.
Modifies the Process private state thread names to fit within a 16-character limit
when the max thread name length is <= 16. These guarantee that the thread names
can be distinguished within the first 16 characters. Prior to this change, those
threads had names in the final dotted name segment that were not distinguishable
within the first 16 characters.
llvm-svn: 213183
The getopt library has a structure called option (lowercase). We
have a structure called Option (uppercase). previously the two
structures had exactly the same definitions, and we were doing a
C-style cast of an Option* to an option*. C-style casts don't
bother to warn you when you cast to unrelated types, but in the
original OptionValidator patch I modified the definition of Option.
This patch fixes the errors by building an array of option
structures and filling it out the correct way before passing it to
the getopt library.
This also fixes one other source of test failures: an uninitialized
read that occurs due to not initializing a field of the
OptionDefinition.
Reviewed By: Todd Fiala
Differential Revision: http://reviews.llvm.org/D4425
llvm-svn: 212628
This patch implements basic functionality of the "platform process
list" command for Windows. Currently this has the following
limitations.
* Certain types of filtering are not enabled (e.g. filtering by
architecture with -a), although most filters work.
* The username of the process is not yet obtained.
* Using -v to list verbose information generates an error.
* The architecture column displays the entire triple, leading to
misaligned formatting of the printed table.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D4413
llvm-svn: 212510
Windows does support pipes, but they do so in a slightly different way. Added a Host layer which abstracts the use of pipes into a new Pipe class that everyone can use.
Windows benefits include:
- Being able to interrupt running processes when IO is directly hooked up
- being able to interrupt long running python scripts
- being able to interrupt anything based on ConnectionFileDescriptor
llvm-svn: 212220
The only part using Carbon is a function in Host.mm used to open a file in Xcode.
That code is broken and it is no longer useful as Xcode supports LLDB natively.
llvm-svn: 212208
This change brings in lldb-gdbserver (llgs) specifically for Linux x86_64.
(More architectures coming soon).
Not every debugserver option is covered yet. Currently
the lldb-gdbserver command line can start unattached,
start attached to a pid (process-name attach not supported yet),
or accept lldb attaching and launching a process or connecting
by process id.
The history of this large change can be found here:
https://github.com/tfiala/lldb/tree/dev-tfiala-native-protocol-linux-x86_64
Until mid/late April, I was not sharing the work and continued
to rebase it off of head (developed via id tfiala@google.com). I switched over to
user todd.fiala@gmail.com in the middle, and once I went to github, I did
merges rather than rebasing so I could share with others.
llvm-svn: 212069
Both NativeProcessLinux (in llgs branch) and Linux Host.cpp had similar code to handle /proc
file reading. I factored that out into a new Linux-specific ProcFileReader class and added a method
that the llgs branch will use for line-by-line parsing.
This change also adds numerous Linux-specific files to Xcode that were missing from the Xcode
project files.
Related to https://github.com/tfiala/lldb/issues/27
llvm-svn: 212015
Replace adhoc inline implementation of llvm::array_lengthof in favour of the
implementation in LLVM. This is simply a cleanup change, no functional change
intended.
llvm-svn: 211868
process fully reaped. The race & bad behavior was because we were letting
the reaping thread in LLDB to also set the Process exit status, so debugserver
would sometimes be shut down before it got a chance to report the exit status,
and then we got confused.
<rdar://problem/16555850>
llvm-svn: 211636
I switched the lldb_private::FileSpec code over to use "llvm::StringRef llvm::sys::path::filename(llvm::StringRef)" for basename() and "llvm::StringRef llvm::sys::path::parent_path(llvm::StringRef)" for dirname().
<rdar://problem/16870083>
llvm-svn: 209917
Changes include:
- ObjectFileMachO can now determine if a binary is "*-apple-ios" or "*-apple-macosx" by checking the min OS and SDK load commands
- ArchSpec now says "<arch>-apple-macosx" is equivalent to "<arch>-apple-ios" since the simulator mixes and matches binaries (some from the system and most from the iOS SDK).
- Getting process inforamtion on MacOSX now correctly classifies iOS simulator processes so they have "*-apple-ios" architectures in the ProcessInstanceInfo
- PlatformiOSSimulator can now list iOS simulator processes correctly instead of showing nothing by using:
(lldb) platform select ios-simulator
(lldb) platform process list
- debugserver can now properly return "*-apple-ios" for the triple in the process info packets for iOS simulator executables
- GDBRemoteCommunicationClient now correctly passes along the triples it gets for process info by setting the OS in the llvm::Triple correctly
<rdar://problem/17060217>
llvm-svn: 209852
This fixes a number of trivial warnings in the Windows build. This is part of a larger effort to make the Windows build warning-free.
See http://reviews.llvm.org/D3914 for more details.
Change by Zachary Turner
llvm-svn: 209749
- CTRL+C wasn't clearing the command in lldb
- CTRL+C doesn't work in python macros in lldb
- Ctrl+C no longer interrupts the running process that you attach to
<rdar://problem/15949205>
<rdar://problem/16778652>
<rdar://problem/16774411>
llvm-svn: 207816
This is a purely mechanical change explicitly casting any parameters for printf
style conversion. This cleans up the warnings emitted by gcc 4.8 on Linux.
llvm-svn: 205607
This is a mechanical change addressing the various sign comparison warnings that
are identified by both clang and gcc. This helps cleanup some of the warning
spew that occurs during builds.
llvm-svn: 205390
These changes were written by Greg Clayton, Jim Ingham, Jason Molenda.
It builds cleanly against TOT llvm with xcodebuild. I updated the
cmake files by visual inspection but did not try a build. I haven't
built these sources on any non-Mac platforms - I don't think this
patch adds any code that requires darwin, but please let me know if
I missed something.
In debugserver, MachProcess.cpp and MachTask.cpp were renamed to
MachProcess.mm and MachTask.mm as they picked up some new Objective-C
code needed to launch processes when running on iOS.
llvm-svn: 205113
(lldb) b puts
(lldb) expr -g -i0 -- (int)puts("hello")
First we will stop at the entry point of the expression before it runs, then we can step over a few times and hit the breakpoint in "puts", then we can continue and finishing stepping and fininsh the expression.
Main features:
- New ObjectFileJIT class that can be easily created for JIT functions
- debug info can now be enabled when parsing expressions
- source for any function that is run throught the JIT is now saved in LLDB process specific temp directory and cleaned up on exit
- "expr -g --" allows you to single step through your expression function with source code
<rdar://problem/16382881>
llvm-svn: 204682
This is a mechanical cleanup of unused functions. In the case where the
functions are referenced (in comment form), I've simply commented out the
functions. A second pass to clean that up is warranted.
The functions which are otherwise unused have been removed. Some of these were
introduced in the initial commit and not in use prior to that point!
NFC
llvm-svn: 204310
libxml2's include path was unconditionally set to /usr/include/libxml2. This
would work previously, however, Mavericks removed the /usr/include directory.
Since LLDB already requires clang, which via LLVM's build infrastructure
searches for libxml2, we have a proper include path for libxml2. If
LIBXML2_FOUND is set, do not touch the libxml2 search path. Instead, allow the
clang's definition to propagate throughout the LLVM build. Otherwise, switch to
find_package(LibXml2) as clang does. This will ensure that the correct path is
used for libxml2 irrespective of the platform.
Furthermore, treat libxml2 as a system provided library. It is not part of the
LLVM source base so it is of little value to enable all warnings on its headers.
This unifies the treatment of libxml2 across clang and LLDB.
llvm-svn: 203955
Justin Hibbits