line breakpoints past the prologue of functions so it can be shared between the
file & line breakpoint resolver, and the source pattern breakpoint resolver,
and then share it.
llvm-svn: 191478
not have breakpoints set on it inserted into code that does have a valid line number. So allow
that line number, and the ThreadPlanStepRange should just continue stepping over 0 line ranges
as if they had the same line number as whatever we were previously stepping through.
llvm-svn: 191477
- Removes the block in UnwindLLDB::AddOneMoreFrame that tests for a bad stack setup,
since it is neither correct (tests the FP GPR), complete (doesn't consider multi-frame
cycles), nor reachable (the construction of RegisterContextLLDB will fail in the case
where either of the two (why just two?) previous frames have the same canonical frame
address as the frame that we propose adding to the stack).
llvm-svn: 191430
Now that SBValues can be setup to ignore synthetic values, this is no longer necessary, and so m_suppress_synthetic_value can go away
Another Hack Bites the Dust
llvm-svn: 191338
to build out the symbol table as addresses are used, and implements
the mechanism for ELF to add stripped symbols from eh_frame.
Uses this mechanism to allow disassembly for addresses corresponding
to stripped symbols for ELF, and provide hooks to implement this for
PE COFF.
Also removes eSymbolContextTailCall in favor of an option for
ResolveSymbolContextForAddress for consistency with the documentation
for eSymbolContextEverything. Essentially, this is just an option for
interpreting the so_addr.
llvm-svn: 191307
the CFA instructions when it was profiling an -fomit-frame-pointer function
and a "volatile" register was saved on the stack (e.g. an argument register).
<rdar://problem/15036546>
llvm-svn: 191267
default-at-first-instruction UnwindPlan if we're at the beginning of a function and
the ABI can provide us with an UnwindPlan to get out of there before falling back
to the generic architectural default UnwindPlan (which usually assumes that the stack
has already been set up.)
Update the FuncUnwinders methods to gracefully handle the case where an assembly
profiler may not be available.
Fix a bug where FuncUnwinders::GetUnwindPlanArchitectureDefaultAtFunctionEntry was
returning the wrong UnwindPlan to its caller.
llvm-svn: 191262
Specifically, allows the unwinder to handle the case where sc.function
gets resolved with a pc that is one past the address range of the function
(consistent with a tail call). However, there is no matching symbol.
Adds eSymbolContextTailCall to provide callers with control over the scope
of symbol resolution and to allow ResolveSymbolContextForAddress to handle
tail calls since this routine is common to unwind and disassembly.
llvm-svn: 191102
Targets and hosts today are little-endian (arm, x86), so this change
should be a no-op as they will not encounter the byte swapping cases.
Byte swapping will happen when cross debugging of big endian-targets
(e.g. MIPS, PPC) on a little-endian host (x86). Register- or word-
sized data copies need to be swapped, but calls to ExtractBytes or
CopyByteOrderedData that would invoke the swapping case are presumably
in error.
llvm-svn: 191005
platforms and called in lldb.cpp while it is built only on some, excluding OSX.
There is no reason to not build it then by default on all platforms.
This fixes build on OSX using llvm configure & make scripts.
Patch (2 of 2) by Adam Strzelecki!
llvm-svn: 190945
We cannot use "GetMaxU64Bitfield" for non-power-of-two sizes, so just use
the same code that handles N > 8 for these.
Review: http://llvm-reviews.chandlerc.com/D1699
llvm-svn: 190873
- searches frames beginning from the current frame, stops when an equivalent context is found
- not using GetStackFrameCount() for performance reasons
- fixes TestInlineStepping (clang/gcc buildbots)
llvm-svn: 190868
- ProcessMonitor::[Do|Serve]Operation no longer depend on file descriptors!
- removed unused member functions CloseFD and EnableIPC
- add semaphores to signal when an Operation is ready to be processed/complete.
This commit fixes a bug that was identified under stress-testing (i.e. build
LLVM while running tests) that led to LLDB becoming unresponsive because the
read/write operations on file descriptors in ProcessMonitor were not checked.
Other test runner improvement/convenience:
- pickup environment variables LLDB_LINUX_LOG and LLDB_LINUX_LOG_OPTIONS to
enable (Linux) logging when running the test suite. Example usage:
$ LLDB_LINUX_LOG="mylog.txt" LLDB_LINUX_LOG_OPTIONS="process thread" python dotest.py
llvm-svn: 190820
for the frame is one past the address range of the calling function.
- Lowers the fix from RegisterContextLLDB for use with disassembly
- Fixes one of three issues in the disassembly test in TestInferiorAssert.py
Also adds documentation that explains the resolution depths and interface.
Note: This change affects the resolution scope for eSymbolContextFunction
without impacting the performance of eSymbolContextSymbol.
Thanks to Matt Kopec for his review.
llvm-svn: 190812
Fixed an issue with the lldb/test/lang/cpp/virtual test case had a virtual class that had a DW_TAG_inheritance child that was virtual and had a DW_AT_data_member_location of:
DW_AT_data_member_location( DW_OP_dup, DW_OP_deref, DW_OP_constu(0x00000018), DW_OP_minus, DW_OP_deref, DW_OP_plus )
We failed to evaluate this and then we were passing the incorrect offset back to clang and clang would crash. The AST external source has a function named LayoutRecordType which allows us to supply the virtual base class offsets, but that really doesn't make sense to do as clang will lay them out correctly. So we must ignore virtual base classes when doing layout.
llvm-svn: 190811
and a mach kernel in all the pages of the core file. If it finds
a user-process dyld binary, assume this is a user process that had
a copy of the mach kernel in memory when it crashed (e.g. lldb doing
kernel debugging) even though we found the kernel binary first.
Also, change the error messages about sections extending past the end
of the file to be warnings and make the messages sound less severe.
Most user process core files have one section that isn't included in
the file and there's no reason to worry people about that.
<rdar://problem/14473235>
llvm-svn: 190741
1. existing breakpoints weren't being re-resolved after the sections of a library were loaded (ie. through dlopen).
2. loaded sections weren't being removed after a shared library had been unloaded.
llvm-svn: 190727
single-quote and double-quotemarks from around file paths specified to
settings like target.expr-prefix or target.process.python-os-plugin-path.
<rdar://problem/14970457>
llvm-svn: 190654
with prefer_file_cache == false. This is what we want to do when
the user is doing a disassemble command -- show the actual memory
contents in case the memory has been corrupted or something -- but
when we're profiling functions for stepping or unwinding
(ThreadPlanStepRange::GetInstructionsForAddress,
UnwindAssemblyInstEmulation::GetNonCallSiteUnwindP) we can read
__TEXT instructions directly out of the file, if it exists.
<rdar://problem/14397491>
llvm-svn: 190638
This allows the PC to be directly changed to a different line.
It's similar to the example python script in examples/python/jump.py, except implemented as a builtin.
Also this version will track the current function correctly even if the target line resolves to multiple addresses. (e.g. debugging a templated function)
llvm-svn: 190572
communication, connection, host, module, mmap, os. Add those. Also
sort the entries so they come in alphabetical order, to make it a
little easier to scan down the list for a specific channel.
llvm-svn: 190570
SVN r189964 provided a sample Python script to inspect unordered(multi){set|map} with synthetic children, contribued by Jared Grubb
This checkin converts that sample script to a C++ provider built into LLDB
A test case is also provided
llvm-svn: 190564
setting of the environment variable COMMAND_MODE. Changed the Platform::GetResumeCountForShell
to Platform::GetResumeCountForLaunchInfo, and check both the shell and in the case of
/bin/sh the environment as well.
llvm-svn: 190538
that /bin/sh re-exec's itself to /bin/bash, so it needs one more resume when you
are using it as the shell than /bin/bash did or you will stop at the start of your
program, rather than running it.
So I added a Platform API to get the number of resumes needed when launching with
a particular shell, and set the right values for Mac OS X.
<rdar://problem/14935282>
llvm-svn: 190381
"coalesce the line ranges for a file & line breakpoint to the first range in each block". We were still setting a silly number
of independent breakpoints sometimes, and until we get a compiler that emits trustworthy is_stmt flags in the line table, we
need to do something to reduce the noise.
<rdar://problem/14920404>
llvm-svn: 190380
From Jim's post on the lldb-dev mailing list:
This code is there as a backstop for when the unwinder drops a frame at
the beginning of new function/trampoline or whatever.
In the (older_ctx_is_equivalent == false) case we will see if we are at
a trampoline function that somebody knows how to get out of, and
otherwise we will stop.
llvm-svn: 190149
have a certain name, not just the first. This
is useful if a class method and an instance
method have the same name.
<rdar://problem/14872081>
llvm-svn: 190008
by appending the thread ID to the test packet when
debugserver requires it.
This allows register writing (and, by extension,
expressions) to work on Mac OS X.
llvm-svn: 190007
Instead of directly manipulating the thread list in Launch and Attach,
just rely on RefreshStateAfterStop to populate the initial list.
Review: http://llvm-reviews.chandlerc.com/D1565
llvm-svn: 189889
/bin/sh is more portable, and all systems with /bin/bash are expected to
have /bin/sh as well, even if only a link to bash.
Review: http://llvm-reviews.chandlerc.com/D1576
llvm-svn: 189879
On Linux there is no separate notion of a process (vs. a thread) for
ptrace(); each thread needs to be individually detached. On FreeBSD
we have a separate process context, and we detach just it.
Review: http://llvm-reviews.chandlerc.com/D1418
llvm-svn: 189666
Testing shows it works for at least trivial cases, while the
USE_STANDARD_JIT case does not even work for those. Thus, don't define
USE_STANDARD_JIT on FreeBSD.
I've left the #if block choosing the appropriate #include in case it's
useful for testing.
llvm-svn: 189611
Some stubs only support g/G packets for registers.
This change makes sure that we check if remote stub supports 'p' packet before using it.
llvm-svn: 189576
- add default timeout of 10s (unil qPlatform_RunCommand supports timeout packets and CommandObjectPlatform is updated to read a timeout flag/setting)
- add a few tests for platform shell
llvm-svn: 189405
- move LaunchProcessPosixSpawn() and Host::LaunchProcess() from freebsd host plugin to common (linux/freebsd section)
- modify MonitorChildProcessThreadFunction to use pid_t from sys/types.h to avoid Linux/FreeBSD/Mac warnings when calling waitpid()
llvm-svn: 189404
- mode_t is defined in <sys/types.h>
- reorganized S_* user rights into win32.h
- Use Host::Kill instead of kill
- Currently #ifdef functions using pread/pwrite.
llvm-svn: 189364
Since I renamed most of the LLVM Mach-O enums in r189314, I had to go fix
LLDB to use the new names. While I was here, I decided that a COFF
plugin really shouldn't be using Mach-O enums.
llvm-svn: 189316
should not split up that pathname itself or require quoting to avoid the same.
This fixing a bug where target create -c "core file" or target create -s "symbol file"
will fail with an error message that the paths haven't been properly quoted. Working
around it required target create -c "core\ file" to survive both attemps at tokenizing.
<rdar://problem/14230629>
llvm-svn: 189313
out of a binary, if the Mach-O binary is MH_PRELOAD ("standalone"), don't
let the OS be set to "ios" or "macosx" - there will be no dynamic loader
used when debugging this process.
<rdar://problem/9956443>
llvm-svn: 189305
Summary:
This merge brings in the improved 'platform' command that knows how to
interface with remote machines; that is, query OS/kernel information, push
and pull files, run shell commands, etc... and implementation for the new
communication packets that back that interface, at least on Darwin based
operating systems via the POSIXPlatform class. Linux support is coming soon.
Verified the test suite runs cleanly on Linux (x86_64), build OK on Mac OS
X Mountain Lion.
Additional improvements (not in the source SVN branch 'lldb-platform-work'):
- cmake build scripts for lldb-platform
- cleanup test suite
- documentation stub for qPlatform_RunCommand
- use log class instead of printf() directly
- reverted work-in-progress-looking changes from test/types/TestAbstract.py that work towards running the test suite remotely.
- add new logging category 'platform'
Reviewers: Matt Kopec, Greg Clayton
Review: http://llvm-reviews.chandlerc.com/D1493
llvm-svn: 189295
live beyont parsing. This is important because
all the ClangASTImporter::Minions for a parser's
ASTContext are cleared when ClangExpressionDeclMap
is deleted.
This resolves many hard-to-reproduce crashes,
especially ones involving breakpoint conditions.
<rdar://problem/14775391>
llvm-svn: 189080
This means that "register read stmm0 --format f" actually works now.
This is a little messy but LLDB assumes 'long double' is portable, when it is not.
llvm-svn: 188698
address.
When loading a dSYM, and the file addresses of the dSYM Sections are
different than the executable binary Sections' file addresses, the
debug info won't be remapped to the actual load addresses correctly.
This only happens with binaries on the in-memory shared cache binaries
where their File addresses have been set to their actual load address
(outside an offset value) whereas the original executable and dSYM
have 0-based File addresses.
I think this patch will not be activated for other cases -- this is
the only case we know of where the dSYM and the executable's File
addresses differ -- but if this causes other problems we can restrict
it more carefully.
<rdar://problem/12335086>
llvm-svn: 188532
Improve the documentation for the new target.memory-module-load-level setting, and also return an error when there is no nlist data when appropriate.
llvm-svn: 188317
a bunch of semicolons where the IndirectFieldDecls
were. These IndirectFieldDecls should have been
implicit.
<rdar://problem/14628784>
llvm-svn: 188247
LLDB needs in memory module load level settings to control how much information is read from memory when loading in memory modules. This change adds a new setting:
(lldb) settings set target.memory-module-load-level [minimal|partial|complete]
minimal will load only sections (no symbols, or function bounds via function starts or EH frame)
partial will load sections + bounds
complete will load sections + bounds + symbols
llvm-svn: 188246
Sylvestre Ledru