so that the user does not have to pipe the output to `jq` or `python -m json.tool`.
This change makes testing more convenient because `-NEXT` patterns can be used.
The "prettify by default" is a good tradeoff to make. The output size increases a bit.
Differential Revision: https://reviews.llvm.org/D86318
This helps with both debugging llvm-reduce and sometimes getting usefull result even if llvm-reduce crashes
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D85996
The legacy PM alias analysis pipeline by default includes basic-aa.
When running `opt -foo-pass` under the NPM and -disable-basic-aa is not
specified, use basic-aa.
This decreases the number of check-llvm failures under NPM from 913 to 752.
Reviewed By: ychen, asbirlea
Differential Revision: https://reviews.llvm.org/D86167
The code that reports "PT_DYNAMIC segment offset + size exceeds the size of the file"
has an issue: it is possible to bypass the validation by overflowing the size + offset result.
Differential revision: https://reviews.llvm.org/D85519
The original commit (7ff0ace96db9164dcde232c36cab6519ea4fce8) was causing
build failure and was reverted in 6d242a7326
==================== Original Commit Message ====================
This patch adds support for referencing different abbrev tables. We use
'ID' to distinguish abbrev tables and use 'AbbrevTableID' to explicitly
assign an abbrev table to compilation units.
The syntax is:
```
debug_abbrev:
- ID: 0
Table:
...
- ID: 1
Table:
...
debug_info:
- ...
AbbrevTableID: 1 ## Reference the second abbrev table.
- ...
AbbrevTableID: 0 ## Reference the first abbrev table.
```
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D83116
Currently we have `checkDRI` and two `createDRIFrom` methods which
are used to create `DynRegionInfo` objects.
And we have an issue: constructions like:
`ObjF->getELFFile()->base() + P->p_offset`
that are used in `createDRIFrom` functions might overflow.
I had to revert `D85519` which triggered such UBSan failure.
This NFC, simplifies and generalizes how we create `DynRegionInfo` objects.
It will allow us to introduce more/better validation checks in a single place.
It also will allow to change `createDRI` to return `Expected<>` so
that we will be able to stop using the `reportError`, which
is used inside currently, and have a warning instead.
Differential revision: https://reviews.llvm.org/D86297
This patch adds support for referencing different abbrev tables. We use
'ID' to distinguish abbrev tables and use 'AbbrevTableID' to explicitly
assign an abbrev table to compilation units.
The syntax is:
```
debug_abbrev:
- ID: 0
Table:
...
- ID: 1
Table:
...
debug_info:
- ...
AbbrevTableID: 1 ## Reference the second abbrev table.
- ...
AbbrevTableID: 0 ## Reference the first abbrev table.
```
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D83116
This patch adds support for emitting multiple abbrev tables. Currently,
compilation units will always reference the first abbrev table.
Reviewed By: jhenderson, labath
Differential Revision: https://reviews.llvm.org/D86194
Then it is trivial to make the output indented (the second parameter of
json::OStream::OStream specifies the indentation).
Reviewed By: jhenderson, echristo
Differential Revision: https://reviews.llvm.org/D86045
This reverts commit 455d5a8a06.
It broke UBSan:
http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-bootstrap-ubsan/builds/21386/steps/check-llvm%20ubsan/logs/stdio
/b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/llvm/test/tools/llvm-readobj/ELF/malformed-pt-dynamic.test:62:10: error: WARN3: expected string not found in input
# WARN3: error: '[[FILE]]': Invalid data was encountered while parsing the file
^
<stdin>:2:1: note: scanning from here
/b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/llvm/tools/llvm-readobj/ELFDumper.cpp:1956:46: runtime error: addition of unsigned offset to 0x0000020c5b30 overflowed to 0x0000020c5b2f
^
<stdin>:2:1: note: with "FILE" equal to "/b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm_build_ubsan/test/tools/llvm-readobj/ELF/Output/malformed-pt-dynamic\\.test\\.tmp3"
/b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/llvm/tools/llvm-readobj/ELFDumper.cpp:1956:46: runtime error: addition of unsigned offset to 0x0000020c5b30 overflowed to 0x0000020c5b2f
^
<stdin>:2:117: note: possible intended match here
/b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/llvm/tools/llvm-readobj/ELFDumper.cpp:1956:46: runtime error: addition of unsigned offset to 0x0000020c5b30 overflowed to 0x0000020c5b2f
^
Input file: <stdin>
Check file: /b/sanitizer-x86_64-linux-bootstrap-ubsan/build/llvm-project/llvm/test/tools/llvm-readobj/ELF/malformed-pt-dynamic.test
The code that reports "PT_DYNAMIC segment offset + size exceeds the size of the file"
has an issue: it is possible to bypass the validation by overflowing the size + offset result.
Differential revision: https://reviews.llvm.org/D85519
Currently we have to set 'Machine' to something in our
YAML descriptions. Usually we use 'EM_X86_64' for 64-bit targets
and 'EM_386' for 32-bit targets. At the same time, in fact, in most
cases our tests do not need a machine type and we can use
'EM_NONE'.
This is cleaner, because avoids the need of using a particular machine.
In this patch I've made the 'Machine' key optional (the default value,
when it is not specified is `EM_NONE`) and removed it (where possible)
from yaml2obj, obj2yaml and llvm-readobj tests.
There are few tests left where I decided not to remove it, because
I didn't want to touch CHECK lines or doing anything more complex
than a removing a "Machine: *" line and formatting lines around.
Differential revision: https://reviews.llvm.org/D86202
It's good to reuse the DWARF parser in lib/DebugInfo so that we don't
need to maintain a separate parser in client side (obj2yaml). Besides,
A test case is added whose length field is a very huge value which makes
obj2yaml stuck when parsing the section.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D86192
AMDGPU ISA isn't backwards compatible and hence -mcpu must always be specified during disassembly.
However, the AMDGPU target CPU is stored in e_flags in the ELF object.
This patch allows targets to implement CPU string detection, and also implements it for AMDGPU by looking at e_flags.
Reviewed By: scott.linder
Differential Revision: https://reviews.llvm.org/D84519
When diffing disassembly dump of two binaries, I see lots of noises from mismatched jump target addresses and global data references, which unnecessarily causes diffs on every function, making it impractical. I'm trying to symbolize the raw binary addresses to minimize the diff noise.
In this change, a local branch target is modeled as a label and the branch target operand will simply be printed as a label. Local labels are collected by a separate pre-decoding pass beforehand. A global data memory operand will be printed as a global symbol instead of the raw data address. Unfortunately, due to the way the disassembler is set up and to be less intrusive, a global symbol is always printed as the last operand of a memory access instruction. This is less than ideal but is probably acceptable from checking code quality point of view since on most targets an instruction can have at most one memory operand.
So far only the X86 disassemblers are supported.
Test Plan:
llvm-objdump -d --x86-asm-syntax=intel --no-show-raw-insn --no-leading-addr :
```
Disassembly of section .text:
<_start>:
push rax
mov dword ptr [rsp + 4], 0
mov dword ptr [rsp], 0
mov eax, dword ptr [rsp]
cmp eax, dword ptr [rip + 4112] # 202182 <g>
jge 0x20117e <_start+0x25>
call 0x201158 <foo>
inc dword ptr [rsp]
jmp 0x201169 <_start+0x10>
xor eax, eax
pop rcx
ret
```
llvm-objdump -d **--symbolize-operands** --x86-asm-syntax=intel --no-show-raw-insn --no-leading-addr :
```
Disassembly of section .text:
<_start>:
push rax
mov dword ptr [rsp + 4], 0
mov dword ptr [rsp], 0
<L1>:
mov eax, dword ptr [rsp]
cmp eax, dword ptr <g>
jge <L0>
call <foo>
inc dword ptr [rsp]
jmp <L1>
<L0>:
xor eax, eax
pop rcx
ret
```
Note that the jump instructions like `jge 0x20117e <_start+0x25>` without this work is printed as a real target address and an offset from the leading symbol. With a change in the optimizer that adds/deletes an instruction, the address and offset may shift for targets placed after the instruction. This will be a problem when diffing the disassembly from two optimizers where there are unnecessary false positives due to such branch target address changes. With `--symbolize-operand`, a label is printed for a branch target instead to reduce the false positives. Similarly, the disassemble of PC-relative global variable references is also prone to instruction insertion/deletion.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D84191
This fixes existent FIXMEs: we should not error out when unable to
find the number of relocations.
Differential revision: https://reviews.llvm.org/D85891
Splitted out from D85519.
Currently we report "PT_DYNAMIC segment offset + size exceeds the size of the file",
this changes it to
"PT_DYNAMIC segment offset (0x1234) + file size (0x5678) exceeds the size of the file (0x68ab)"
Differential revision: https://reviews.llvm.org/D85654
Add support for passing in libraries via `-l` and `-L` options to
`llvm-libtool-darwin`.
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D85540
Add support for producing universal binaries containing archives when
`llvm-libtool-darwin` is given inputs of multiple architectures.
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D85334
This reapplies commit e137b55058 with
fixes for the broken test case: Non-global symbols should only be
skipped after checking that they're not referenced by the harness.
This change moves elfabi related code to llvm/InterfaceStub library
so it can be shared by multiple llvm tools without causing cyclic
dependencies.
Differential Revision: https://reviews.llvm.org/D85678
Add support for -arch_only option for llvm-libtool-darwin. This diff
also adds support for accepting universal files as input and flattening
them to create the required static library. Supports input universal
files contaning both Mach-O object files or archives.
Differences from cctools' libtool:
- `-arch_only` can be specified multiple times
- archives containing universal files are considered invalid (libtool
allows such archives)
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D84770
If the referenced symbol of a J[U]MP_SLOT is invalid (e.g. symbol index 0), llvm-objdump -d will bail out:
```
error: 'a': st_name (0x326600) is past the end of the string table of size 0x7
```
where 0x326600 is the st_name field of the first entry past the end of .symtab
Change it to a warning to continue dumping.
`X86/plt.test` uses a prebuilt executable, so I pick `ELF/AArch64/plt.test`
which has a YAML input and can be easily modified.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85623
`getElfSegmentType` and `getElfPtType` are methods that are used for printing
segment types for LLVM and GNU styles accordingly.
This patch does a cleanup and simplification that allows to avoid
the code duplication and to get rid of one macro.
Differential revision: https://reviews.llvm.org/D85830
Specifying --headers is equivalent to setting --file-headers,
--program-headers and --section-headers at the same time.
The existent test case uses a precompiled object and doesn't test the
output properly. This patch fixes it.
Differential revision: https://reviews.llvm.org/D85832
This change replaces the InitialLength of pub-tables with Format and
Length. All the InitialLength fields have been removed.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85880
This removes the last `unwrapOrError` call from the `printRelocationsHelper`.
There is a little additional complexity because of `SHT_RELR/SHT_ANDROID_RELR` sections.
Such sections contains only relative relocations and they do not have a
symbol table associated with them, hence we should not try to treat
their `sh_link` field as a reference to a symbol table.
Differential revision: https://reviews.llvm.org/D85430
where stdio.h ::remove() may set errno to EEXIST instead of ENOTEMPTY.
POSIX.1-2017 allows EEXIST for unlink() (which is called by remove()):
> [EEXIST] or [ENOTEMPTY]
> The flag parameter has the AT_REMOVEDIR bit set and the path argument names a directory that is not an empty directory, or there are hard links to the directory other than dot or a single entry in dot-dot.
Reviewed By: ro
Differential Revision: https://reviews.llvm.org/D85690
It removes all `unwrapOrError` calls except the first one, which
is is bit different and can be removed separately.
Differential revision: https://reviews.llvm.org/D85303
This patch refactors the DWARF section dumpers. When dumping a DWARF
section, if the DWARF parser fails to parse the section, we will dump it
as a raw content section. This patch also fixes a bug in
DWARFYAML::Data::isEmpty(). Finally, a test case that tests dumping the
__debug_aranges section is added.
Reviewed By: jhenderson, grimar
Differential Revision: https://reviews.llvm.org/D85506
The switch from llvm::cl to OptTable (D83530) dropped --version, which
is needed by some users.
This patch also adds a -v alias, which is available in GNU addr2line.
The version dumping is similar to llvm-objcopy --version (exotic):
```
llvm-symbolizer
LLVM (http://llvm.org/):
LLVM version 12.0.0git
Optimized build with assertions.
Default target: x86_64-unknown-linux-gnu
Host CPU: skylake-avx512
```
Reviewed By: dyung, jhenderson
Differential Revision: https://reviews.llvm.org/D85624
Although the DWARF specification states that .debug_aranges entries
can't have length zero, these can occur in the wild. There's no
particular reason to enforce this part of the spec, since functionally
they have no impact. The patch removes the error and introduces a new
warning for premature terminator entries which does not stop parsing.
This is a relanding of cb3a598c87, adding the missing obj2yaml part
that was needed.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46805. See also
https://reviews.llvm.org/D71932 which originally introduced the error.
Reviewed by: ikudrin, dblaikie, Higuoxing
Differential Revision: https://reviews.llvm.org/D85313
It adds the proper warnings reporting and updates the mips-reginfo.test to
remove using of the precompiled binary.
Differential revision: https://reviews.llvm.org/D85511
Implemented the `llvm-profdata overlap` feature for sample profiles. It reports weighted //similarity// and unweighted //overlap// metrics at program and function level for two input profiles. Similarity metrics are symmetric with regards to the order of two input profiles. By default, the tool only reports program-level summary. Users can look into function-level details via additional options `--function`, `--similarity-cutoff`, and `--value-cutoff`.
The similarity metrics are designed as follows:
* Program-level summary
* Whole program profile similarity is an aggregate over function-level similarity `FS`: `PS = sum(FS(A) * avg_weight(A))` for all function `A`.
* Whole program sample overlap: `PSO = common_samples / total_samples`.
* Function overlap: `FO = #common_function / #total_function`.
* Hot-function overlap: `HFO = #common_hot_function / #total_hot_function`.
* Hot-block overlap: `HBO = #common_hot_block / #total_hot_block`.
* Function-level details
* Function-level similarity is an aggregate over line/block-level similarities `BS` of all sample lines/blocks in the function, weighted by the closeness of the function's weights in two profiles: `FS = sum(BS(i)) * (1 - weight_distance(A))`.
* Function-level sample overlap: `FSO = common_samples / total_samples` for samples in the function.
Reviewed By: wenlei, hoyFB, wmi
Differential Revision: https://reviews.llvm.org/D83852
It is not enough to replace all uses of users of the function with undef,
the users, we only drop instruction users, so they may stick around.
Let's try different approach - first drop bodies for all the functions
we will drop, which should take care of blockaddress issue the previous
rewrite was dealing with; then, after dropping *all* such bodies,
replace remaining uses with undef (thus all the uses are either
outside of functions, or are in kept functions)
and then finally drop functions.
This seems to work, and passes the *existing* test coverage,
but it is possible that a new issue will be discovered later :)
A new (previously crashing) test added.
Add support for `-D` and `-U` options for llvm-libtool-darwin. `-D`
allows for using zero for timestamps and UIDs/GIDs. `-U` allows for
using actual timestamps and UIDs/GIDs.
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D84209
Add support for `-filelist` option for llvm-libtool-darwin. `-filelist`
option allows for passing in a file containing a list of filenames.
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D84206
Add support for constant MachO::CPU_SUBTYPE_ARM64_V8. This constant is
needed so as to match `llvm-libtool-darwin`'s behavior to that of
cctools' libtool when `-arch_only` flag is passed in on command line.
Reviewed by jhenderson, alexshap, smeenai
Differential Revision: https://reviews.llvm.org/D85041
Add symlinks for `llvm-libtool-darwin` and
`llvm-install-name-tool`.
Reviewed by jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D85054
dumpDebugStrings() and dumpDebugAbbrev() are no longer used in
macho2yaml. This patch helps remove them.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D85496
Unit.Format, Unit.Version and Unit.AddrSize are replaced with
dwarf::FormParams in D84496 to get rid of unnecessary functions
getOffsetSize() and getRefSize(). However, that change makes it
difficult to make AddrSize optional (Optional<uint8_t>). This change
pulls out dwarf::FormParams from DWARFYAML::Unit and use it as a helper
struct in DWARFYAML::emitDebugInfo().
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D85296
The `decode_relrs` helper is declared as:
`Expected<std::vector<Elf_Rel>> decode_relrs(Elf_Relr_Range relrs) const;`
it never returns an error though and hence can be simplified to return
a vector.
Differential revision: https://reviews.llvm.org/D85302
This patch adds support for dumping DWARF sections to obj2yaml. The
.debug_aranges section is used to illustrate the basic idea.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D85094
Currently, we only test the `--stackmap` option here:
https://github.com/llvm/llvm-project/blob/master/llvm/test/Object/stackmap-dump.test
it uses a precompiled MachO binary currently and I've found no tests for this option for ELF.
The implementation also has issues. For example, it might assert on a wrong version
of the .llvm-stackmaps section. Or it might crash on an empty or truncated section.
This patch introduces a new tools/llvm-readobj/ELF test file as well as implements a few
basic checks to catch simple crashes/issues
It also eliminates `unwrapOrError` calls in `printStackMap()`.
Differential revision: https://reviews.llvm.org/D85208
This can practically easily be a product of combining strings with
macros in resource files.
This fixes https://github.com/mstorsjo/llvm-mingw/issues/140.
As string literals within llvm-rc are handled as StringRefs, each
referencing an uninterpreted slice of the input file, with actual
interpretation of the input string (codepage handling, unescaping etc)
done only right before writing them out to disk, it's hard to
concatenate them other than just bundling them up in a vector,
without rearchitecting a large part of llvm-rc.
This matches how the same already is supported in VersionInfoValue,
with a std::vector<IntOrString> Values.
MS rc.exe only supports concatenated string literals in version info
values (already supported), string tables (implemented in this patch)
and user data resources (easily implemented in a separate patch, but
hasn't been requested by any end user yet), while GNU windres supports
string immediates split into multiple strings anywhere (e.g. like
(100 ICON "myicon" ".ico"). Not sure if concatenation in other
statements actually is used in the wild though, in resource files
normally built by GNU windres.
Differential Revision: https://reviews.llvm.org/D85183
D83530 removed --inlining={true,false} which were used by old asan_symbolize.py script.
Add compatibility aliases so that old asan_symbolize.py and sanitizer
binaries can work with new llvm-symbolizer.
Reviewed By: thakis
Differential Revision: https://reviews.llvm.org/D85228
for the advantage outlined by D83639 ([OptTable] Support grouped short options)
Some behavior changes:
* -i={0,false} is removed. Use --no-inlines instead.
* --demangle={0,false} is removed. Use --no-demangle instead
* -untag-addresses={0,false} is removed. Use --no-untag-addresses instead
Added a higher level API OptTable::parseArgs which handles optional
initial options populated from an environment variable, expands response
files recursively, and parses options.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D83530
http://lab.llvm.org:8011/builders/clang-cmake-x86_64-avx2-linux/builds/15718/steps/build%20stage%201/logs/stdio:
FAILED: /usr/bin/c++ -DGTEST_HAS_RTTI=0 -D_DEBUG -D_GNU_SOURCE -D__STDC_CONSTANT_MACROS -D__STDC_FORMAT_MACROS -D__STDC_LIMIT_MACROS -Itools/llvm-readobj -I/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj -Iinclude -I/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/include -march=broadwell -fPIC -fvisibility-inlines-hidden -Werror=date-time -Wall -Wextra -Wno-unused-parameter -Wwrite-strings -Wcast-qual -Wno-missing-field-initializers -pedantic -Wno-long-long -Wno-maybe-uninitialized -Wdelete-non-virtual-dtor -Wno-comment -fdiagnostics-color -ffunction-sections -fdata-sections -O3 -fno-exceptions -fno-rtti -UNDEBUG -std=c++14 -MD -MT tools/llvm-readobj/CMakeFiles/llvm-readobj.dir/ELFDumper.cpp.o -MF tools/llvm-readobj/CMakeFiles/llvm-readobj.dir/ELFDumper.cpp.o.d -o tools/llvm-readobj/CMakeFiles/llvm-readobj.dir/ELFDumper.cpp.o -c /home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp: In function ‘llvm::Expected<const llvm::object::Elf_Mips_Options<ELFT>*> readMipsOptions(const uint8_t*, llvm::ArrayRef<unsigned char>&, bool&)’:
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp:3374:12: error: parse error in template argument list
if (O->size < ExpectedSize)
Note: I played with godbolt.org and was able to catch the similar "error in template argument list" error when used gcc 4.9.0 with this code.
Fix: try to introduce a variable to store `O->size`, it helped to me in godbolt.
http://lab.llvm.org:8011/builders/clang-cmake-x86_64-avx2-linux/builds/15710/steps/build%20stage%201/logs/stdio
fails with:
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp: In function ‘llvm::Expected<const llvm::object::Elf_Mips_Options<ELFT>*> readMipsOptions(const uint8_t*, llvm::ArrayRef<unsigned char>&, bool&)’:
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp:3373:19: error: the value of ‘ExpectedSize’ is not usable in a constant expression
if (O->size < ExpectedSize)
^
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp:3369:10: note: ‘size_t ExpectedSize’ is not const
size_t ExpectedSize =
^
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp:3373:12: error: parse error in template argument list
if (O->size < ExpectedSize)
^
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp: In instantiation of ‘llvm::Expected<const llvm::object::Elf_Mips_Options<ELFT>*> readMipsOptions(const uint8_t*, llvm::ArrayRef<unsigned char>&, bool&) [with ELFT = llvm::object::ELFType<(llvm::support::endianness)0u, true>; uint8_t = unsigned char]’:
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp:3400:30: required from ‘void {anonymous}::ELFDumper<ELFT>::printMipsOptions() [with ELFT = llvm::object::ELFType<(llvm::support::endianness)0u, true>]’
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp:2878:21: required from ‘void {anonymous}::ELFDumper<ELFT>::printArchSpecificInfo() [with ELFT = llvm::object::ELFType<(llvm::support::endianness)0u, true>]’
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp:6999:1: required from here
/home/ssglocal/clang-cmake-x86_64-avx2-linux/clang-cmake-x86_64-avx2-linux/llvm/llvm/tools/llvm-readobj/ELFDumper.cpp:3373:5: error: ‘size’ is not a member template function
Fix: add 2 `const` words to variables.
`printMipsOptions()` and the test related has the following issues currently:
1) It does not check the value of Elf_Mips_Options<ELFT>::size field.
2) For ODK_REGINFO options it is possible to read past the end of buffer,
because there is no check against the `sizeof(Elf_Mips_RegInfo<ELFT>)`.
3) The error about the broken size is just printed to the standard output.
4) The binary input is used for the test.
5) There is no testing for multiple options in the .MIPS.options section,
though the code supports it.
6) Only llvm-readobj is tested, but not llvm-readelf.
7) "Unsupported MIPS options tag" message does not reveal the tag ID/name.
This patch fixes all of these points.
Differential revision: https://reviews.llvm.org/D84854
It turns out that findSectionByName can return
const Elf_Shdr * instead of Expected<>, because its
code never returns an error currently (it reports warnings instead).
Differential revision: https://reviews.llvm.org/D85135
See https://lists.llvm.org/pipermail/llvm-dev/2020-July/143373.html
"[llvm-dev] Multiple documents in one test file" for some discussions.
This patch has explored several alternatives. The current semantics are similar to
what @dblaikie proposed.
`split-file filename output` splits the input file into multiple parts separated by
regex `^(.|//)--- filename` and write each part to the file `output/filename`
(`filename` can include path separators).
Use case A (organizing input of different formats (e.g. linker
script+assembly) in one file).
```
# RUN: split-file %s %t
# RUN: llvm-mc %t/asm -o %t.o
# RUN: ld.lld -T %t/lds %t.o -o %t
This is sometimes better than the %S/Inputs/ approach because the user
can see the auxiliary files immediately and don't have to open another file.
# asm
...
# lds
...
```
Use case B (for utilities which don't have built-in input splitting
feature):
```
// RUN: split-file %s %t
// RUN: llc < %t/1.ll | FileCheck %s --check-prefix=CASE1
// RUN: llc < %t/2.ll | FileCheck %s --check-prefix=CASE2
Combing tests prudently can improve readability.
For example, when testing parsing errors if the recovery mechanism isn't possible,
grouping the tests in one file can more readily see test coverage/strategy.
//--- 1.ll
...
//--- 2.ll
...
```
Since this is a new utility, there is no git history concerns for
UpperCase variable names. I use lowerCase variable names like mlir/lld.
Reviewed By: jhenderson, lattner
Differential Revision: https://reviews.llvm.org/D83834
Archives can now be specified as input files the same way that object
files are. Archives will always be linked after all objects (regardless
of the relative order of the inputs) but before any dynamic libraries or
process symbols.
This patch also relaxes matching for slice triples in
StaticLibraryDefinitionGenerator in order to support this feature:
Vendors need not match if the source vendor is unknown.
We have a `findSectionByName` helper that tries to find a section
by it name. It is used in a few places, but never tested.
I'd like to reuse this helper for a different place.
For this, I've changed it to return Expected<> and now it
doesn't use `unwrapOrErr` anymore. It also now a member of
Dumper class and might report warnings.
Differential revision: https://reviews.llvm.org/D84651
The -phony-externals option adds a generator which explicitly defines any
otherwise unresolved externals as null. This transforms link-time
unresolved-symbol errors into potential runtime null pointer accesses
(if an unresolved external is actually accessed during execution).
This option can be useful in -harness mode to avoid having to mock a
large number of symbols that are not reachable at runtime (e.g. unused
methods referenced by a class vtable).
This prevents weak symbols from being immediately dead-stripped when not
directly referenced from the test harneess, enabling use of weak symbols
from the code under test.
Refactoring `Slice` class and function `createUniversalBinary` from
`llvm-lipo` into MachOUniversalWriter. This refactoring is necessary so
as to use the refactored code for creating universal binaries under
llvm-libtool-darwin.
Reviewed by alexshap, smeenai
Differential Revision: https://reviews.llvm.org/D84662
This patch makes the 'debug_aranges' entry optional. If the entry is
empty, yaml2obj will only emit the header for it.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D84921
The -harness option enables new testing use-cases for llvm-jitlink. It takes a
list of objects to treat as a test harness for any regular objects passed to
llvm-jitlink.
If any files are passed using the -harness option then the following
transformations are applied to all other files:
(1) Symbols definitions that are referenced by the harness files are promoted
to default scope. (This enables access to statics from test harness).
(2) Symbols definitions that clash with definitions in the harness files are
deleted. (This enables interposition by test harness).
(3) All other definitions in regular files are demoted to local scope.
(This causes untested code to be dead stripped, reducing memory cost and
eliminating spurious unresolved symbol errors from untested code).
These transformations allow the harness files to reference and interpose
symbols in the regular object files, which can be used to support execution
tests (including fuzz tests) of functions in relocatable objects produced by a
build.
This reduces the number of check-llvm failures by 500.
Ideally we'd have a codegen version of PassRegistry.def, or have all the
codegen passes ported and put into PassRegistry.def. But since that
doesn't exist yet, hardcode the list of codegen IR passes.
There are still codegen passes missing from this list, I'll add them
later as I stumble upon them.
Reviewed By: asbirlea, ychen
Differential Revision: https://reviews.llvm.org/D84872
This introduces the printRelocationsHelper() which now contains the common
code used by both GNU and LLVM output styles.
Differential revision: https://reviews.llvm.org/D83935
This patch refactors the llvm tools namely, llvm-stress and sancov,
as well as the llvm TableGen utility, to use the new InitLLVM
interface which encapsulates PrettyStackTrace.
This is from https://reviews.llvm.org/D70702, but only for LLVM.
Reviewed-by: Kai
Differential Revision: https://reviews.llvm.org/D83484
Currently, when dumping section headers, llvm-readelf
prints "RELR" for SHT_ANDROID_RELR/SHT_RELR sections.
The behavior was introduced in D47919 and revealed in D84330.
But "SHT_ANDROID_RELR" has a different value from "SHT_RELR".
Also, "SHT_ANDROID_REL/SHT_ANDROID_RELA" are printed as "ANDROID_REL/ANDROID_RELA",
what makes the handling of the "SHT_ANDROID_RELR" inconsistent.
This patch makes llvm-readelf to print "ANDROID_RELR" instead of "RELR".
Differential revision: https://reviews.llvm.org/D84393
PGO profile is usually more precise than sample profile. However, PGO profile
needs to be collected from loadtest and loadtest may not be representative
enough to the production workload. Sample profile collected from production
can be used as a supplement -- for functions cold in loadtest but warm/hot
in production, we can scale up the related function in PGO profile if the
function is warm or hot in sample profile.
The implementation contains changes in compiler side and llvm-profdata side.
Given an instr profile and a sample profile, for a function cold in PGO
profile but warm/hot in sample profile, llvm-profdata will either mark
all the counters in the profile to be -1 or scale up the max count in the
function to be above hot threshold, depending on the zero counter ratio in
the profile. The assumption is if there are too many counters being zero
in the function profile, the profile is more likely to cause harm than good,
then llvm-profdata will mark all the counters to be -1 indicating the
function is hot but the profile is unaccountable. In compiler side, if a
function profile with all -1 counters is seen, the function entry count will
be set to be above hot threshold but its internal profile will be dropped.
In the long run, it may be useful to let compiler support using PGO profile
and sample profile at the same time, but that requires more careful design
and more substantial changes to make two profiles work seamlessly. The patch
here serves as a simple intermediate solution.
Differential Revision: https://reviews.llvm.org/D81981
This patch helps teach llvm-readelf to emit a correct number spaces when
dumping in hex format.
Before this patch, when the hex data doesn't fill the 4th column, some
spaces are missing.
```
Hex dump of section '.sec':
0x00000000 00000000 00000000 00000000 00000000 ................
0x00000010 00000000 00000000 00000000 0000 ..............
```
After this patch:
```
Hex dump of section '.sec':
0x00000000 00000000 00000000 00000000 00000000 ................
0x00000010 00000000 00000000 00000000 0000 ..............
```
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D84640
Starting with Skylake, the LBR contains the precise number of cycles between the two
consecutive branches.
Making use of this will hopefully make the measurements more precise than the
existing methods of using RDTSC.
Differential Revision: https://reviews.llvm.org/D77422
New change: check for existence of field `cycles` in perf_branch_entry before enabling this mode.
This should prevent compilation errors when building for older kernel whose headers don't support it.
Much like with function reduction, there may be remaining unhandled uses
of function, in particular in blockaddress. And in constants we can't
RAUW it with undef, because undef is not a function.
Instead, let's try to pretent that in the remaining cases, the new
signature didn't change, by bitcasting it.
A new (previously crashing) test case added.
There may be other users of a function other than CallInsts,
but what's more important, we can't actually replace function pointer
with undef, because for constants, that would not preserve the type
and RAUW would assert.
In particular, that affects blockaddress, however it proves to be
prohibitively complex to come up with a good test involving blockaddress:
we'd need to both ensure that the function body survives until
this pass, and is not interesting in this pass.
Summary:
Recursion detection can be non-trivial. Currently, the state-of-the-art for LLVM,
as far as i'm concerned, is D72362 `[clang-tidy] misc-no-recursion: a new check`.
However, it is quite limited:
* It does very basic call-graph based analysis, in the sense it will report even dynamically-unreachable recursion.
* It is inherently limited to a single TU
* It is hard to gauge how problematic each recursion is in practice.
Some of that can be addressed by adding clang analyzer-based check,
then it would at least support multiple TU's.
However, we can approach this problem from another angle - dynamic run-time analysis.
We already have means to capture a run-time callgraph (XRay, duh),
and there are already means to reconstruct it within `llvm-xray` tool.
This proposes to add a `-recursive-calls-only` switch to the `account` tool.
When the switch is on, when re-constructing callgraph for latency reconstruction,
each time we enter/leave some function, we increment/decrement an entry for the function
in a "recursion depth" map. If, when we leave the function, said entry was at `1`,
then that means the function didn't call itself, however if it is at `2` or more,
then that means the function (possibly indirectly) called itself.
If the depth is 1, we don't account the time spent there,
unless within this call stack the function already recursed into itself.
Note that we don't pay for recursion depth tracking when `recursive-calls-only` is not on,
and the perf impact is insignificant (+0.3% regression)
The overhead of the option is actually negative, around -5.26% user time on a medium-sized (3.5G) XRay log.
As a practical example, that 3.5G log is a capture of the entire middle-end opt pipeline
at `-O3` for RawSpeed unity build. There are total of `5500` functions in the log,
however `-recursive-calls-only` says that `269`, or 5%, are recursive.
Having this functionality could be helpful for recursion eradication.
Reviewers: dberris, mboerger
Reviewed By: dberris
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D84582
It doesn't really need to know where Timings are stored, it just needs
to be able to sort them, so MutableArrayRef is enough.
That uncovers an interesting quirk that it relied on
implicit double->int conversion for calculating percentiles.
We can happily turn function definitions into declarations,
thus obscuring their argument from being elided by this pass.
I don't believe there is a good reason to just ignore declarations.
likely even proper llvm intrinsics ones,
at worst the input becomes uninteresting.
The other question here is that all these transforms are all-or-nothing.
In some cases, should we be treating each use separately?
The main blocker here seemed to be that llvm::CloneFunctionInto()
does `&OldFunc->front()`, which inserts a nullptr into a densemap,
which is not happy about it and asserts.
replaceFunctionCalls() is very non-exhaustive, it only handles
CallInst's. Which means, by the time we drop old function,
there may still be uses of it lurking around.
Let's instead whack-a-mole them by all by replacing with undef.
I'm not sure this is the best handling, especially for calls, but IMO
poorly reduced input is much better than crashing reduction tool.
A (previously-crashing!) test added.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46819
Terminator may have returned value, so we need to replace uses,
and in general handle invoke as a branch inst.
I'm not sure this is the best handling, but IMO poorly reduced
input is much better than crashing reduction tool.
A (previously-crashing!) test added.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46818
ReduceFunctions could do it, but it also replaces *all* calls with undef,
so if any of undef replacements makes reduction uninteresting,
it won't work.
ReduceBasicBlocks also could do it, but well, it may take many guesses
for all the blocks of a function to happen to be out-of-chunk,
which is not a very efficient way to go about it.
So let's just do this first.
See https://lists.llvm.org/pipermail/llvm-dev/2020-July/143373.html
"[llvm-dev] Multiple documents in one test file" for some discussions.
`extract part filename` splits the input file into multiple parts separated by
regex `^(.|//)--- ` and extract the specified part to stdout or the
output file (if specified).
Use case A (organizing input of different formats (e.g. linker
script+assembly) in one file).
```
// RUN: extract lds %s -o %t.lds
// RUN: extract asm %s -o %t.s
// RUN: llvm-mc %t.s -o %t.o
// RUN: ld.lld -T %t.lds %t.o -o %t
This is sometimes better than the %S/Inputs/ approach because the user
can see the auxiliary files immediately and don't have to open another file.
```
Use case B (for utilities which don't have built-in input splitting
feature):
```
// RUN: extract case1 %s | llc | FileCheck %s --check-prefix=CASE1
// RUN: extract case2 %s | llc | FileCheck %s --check-prefix=CASE2
Combing tests prudently can improve readability.
This is sometimes better than having multiple test files.
```
Since this is a new utility, there is no git history concerns for
UpperCase variable names. I use lowerCase variable names like mlir/lld.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D83834
It is used for printing section headers in the GNU style
and the implementation can be simplified.
Differential revision: https://reviews.llvm.org/D84330
Summary:
If there was a single target to begin with, because a single target
can only occupy a single chunk, we couldn't increase granularity.
and would immediately give up.
Likewise, if we had multiple targets, if by the end we'd end up with
a single target, we wouldn't finish reducing it, it would always
end up being "interesting"
Reviewers: dblaikie, nickdesaulniers, diegotf
Reviewed By: dblaikie
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D84318
This patch includes the supporting code that enables always
instrumenting the function entry block by default.
This patch will NOT the default behavior.
It adds a variant bit in the profile version, adds new directives in
text profile format, and changes llvm-profdata tool accordingly.
This patch is a split of D83024 (https://reviews.llvm.org/D83024)
Many test changes from D83024 are also included.
Differential Revision: https://reviews.llvm.org/D84261
It was requested in D84173 thread to not do it, because otherwise we extract and
check the name of the symbol table in LLVM style, but do not use it and
might report a warning which perhaps might be confusing.
Differential revision: https://reviews.llvm.org/D84231
These functions can be used to generate strings like
"SHT_?? section with index ?" to describe sections in error/warning messages,
what helps to simplify and generalize them.
Also this allows to isolate the following common code pattern:
`&Sec - &cantFail(Obj->sections()).front();`
Differential revision: https://reviews.llvm.org/D84240
The current behavior was introduced by me in D37567 and it is a bit strange. It prints the
"Error: ...." message to the errs() manually and stops dumping the group section which has this error.
This behavior is consistent with GNU though, but it is very inconsistent with what the regular llvm-readelf
code usually does/prints, so I suggest to change the implementation:
1) Instead of printing "Error: ...." to errs() - just report a warning.
2) Try to continue dumping the section.
3) Merge broken-group.test to group.text.
This is what this patch does.
Differential revision: https://reviews.llvm.org/D84170
We have an issue currently: we are trying to read the name of the SHT_DYNSYM section
very early and using `unwrapOrError` call for that.
The name is needed only for the GNU output. Because of the current logic, the tool
fails to dump the whole object when something is wrong with the name of the .dynsym section.
This patch delays reading the name and also allows it to be broken.
Differential revision: https://reviews.llvm.org/D84173
Add support for flattening archives while creating static libraries.
Hence, can now pass archives as input in addition to Mach-O binaries.
Furthermore, archives themselves must only conatain Mach-O binaries. As
per cctools' libtool's behavior, llvm-libtool-darwin does not flatten
archives recursively.
Reviewed by alexshap, smeenai, jhenderson
Differential Revision: https://reviews.llvm.org/D83520
Add support for creating static libraries when the input includes only
Mach-O binaries (and not libraries/archives themselves).
Reviewed by alexshap, Ktwu, smeenai, jhenderson, MaskRay, mtrent
Differential Revision: https://reviews.llvm.org/D83002
OptNoneInstrumentation is part of StandardInstrumentations. It skips
functions (or loops) that are marked optnone.
The feature of skipping optional passes for optnone functions under NPM
is gated on a -enable-npm-optnone flag. Currently it is by default
false. That is because we still need to mark all required passes to be
required. Otherwise optnone functions will start having incorrect
semantics. After that is done in following changes, we can remove the
flag and always enable this.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D83519
In an object file, a "PC Begin" field in a FDE is usually relocated by a
PC-relative relocation. Use a relocation-aware DWARFDataExtractor overload (with
DWARFContext and a reference to its internal .eh_frame representation) to decode
addresses correctly. In an object file, most sections have addresses of zero. So
the displayed addresses are almost always offsets relative to the start of the
associated text section.
DWARFContext::create handles .eh_frame and .rela.eh_frame by itself, so if there
are more than one .eh_frame (technically possible, but almost always erronerous
in practice), this will only handle the first one. Supporting multiple
.eh_frame is beyond the scope of this patch.
Reviewed By: grimar, jhenderson
Differential Revision: https://reviews.llvm.org/D84106
In addition, move the definition of the class into the Debugify.h,
so we can use it from different levels.
The motivation for this is D82547.
Differential Revision: https://reviews.llvm.org/D83391
Newly-added test previously crashed.
While it is up for debate whether or not instruction reduction
should be indiscriminate in instruction dropping (there you can
just ensure that the test case is still -verify'ies), here
if we drop terminator, CloneFunctionInto() will immediately crash.
So let's not do that :)
This matches LLD and fixes https://sourceware.org/bugzilla/show_bug.cgi?id=26262#c1
.o is a bad choice for save-temps output because it is easy to override the bitcode file (*.o)
```
# Use bfd for the example, -fuse-ld=gold is similar.
clang -flto -c a.c # generate bitcode file a.o
clang -fuse-ld=bfd -flto a.o -o a -Wl,-plugin-opt=save-temps # override a.o
# The user repeats the command but get surprised, because a.o is now a combined module.
clang -fuse-ld=bfd -flto a.o -o a -Wl,-plugin-opt=save-temps
```
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D84132
This patch changes llvm-readelf (and llvm-readobj for consistency)
behavior to print an error when executed with no input files.
Reading from stdin can be achieved via a '-' for the input
object.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46400
Differential Revision: https://reviews.llvm.org/D83704
Reviewed by: jhenderson, MaskRay, sbc, jyknight
There is a strange "feature" of the code: it handles all relocations as `Elf_Rela`.
For handling `Elf_Rel` it converts them to `Elf_Rela` and passes `bool IsRela` to
specify the real type everywhere.
A related issue is that the
`decode_relrs` helper in lib/Object has to return `Expected<std::vector<Elf_Rela>>`
because of that, though it could return a vector of `Elf_Rel`.
I think we should just start using templates for relocation types, it makes the code
cleaner and shorter. This patch does it.
Differential revision: https://reviews.llvm.org/D83871
It fixes/improves the following:
1) Some code was duplicated.
2) A "The .MIPS.abiflags section has a wrong size" error was not reported as a warning,
but was printed to stdout for the LLVM style. Also, it was reported as an error for the GNU style.
This patch changes the behavior to be consistent and to report warnings.
3) `unwrapOrError()` was used before, now a warning is reported instead.
Differential revision: https://reviews.llvm.org/D84033
The function extractArgumentsFromModule() was passing a one-based index to,
but replaceFunctionCalls() was expecting a zero-based argument index. This
resulted in assertion errors when reducing function call arguments with
different types. Additionally, the
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D84099
.gcno, .gcda and source files can be modified while we are reading them. If the
concurrent modification of a file being read nullifies the NUL terminator
assumption, llvm-cov can trip over an assertion failure in MemoryBuffer::init.
This is not so rare - the source files can be in an editor and .gcda can be
written by an running process (if the process forks, when .gcda gets written is
probably more unpredictable).
There is no accompanying test because an assertion failure requires data
races with some involved setting.
Under NPM, the asan-globals-md analysis is required but cannot be run
within the asan function pass due to module analyses not being able to
run from a function pass. So this pins all tests using "-asan" to the
legacy PM and adds a corresponding RUN line with
-passes='require<asan-globals-md>,function(asan)'.
Now all tests in Instrumentation/AddressSanitizer pass when
-enable-new-pm is by default on.
Tests were automatically converted using the following python script and
failures were manually fixed up.
import sys
for i in sys.argv:
with open(i, 'r') as f:
s = f.read()
with open(i, 'w') as f:
for l in s.splitlines():
if "RUN:" in l and ' -asan -asan-module ' in l and '\\' not in l:
f.write(l.replace(' -asan -asan-module ', ' -asan -asan-module -enable-new-pm=0 '))
f.write('\n')
f.write(l.replace(' -asan -asan-module ', " -passes='require<asan-globals-md>,function(asan),module(asan-module)' "))
f.write('\n')
elif "RUN:" in l and ' -asan ' in l and '\\' not in l:
f.write(l.replace(' -asan ', ' -asan -enable-new-pm=0 '))
f.write('\n')
f.write(l.replace(' -asan ', " -passes='require<asan-globals-md>,function(asan)' "))
f.write('\n')
else:
f.write(l)
f.write('\n')
See https://bugs.llvm.org/show_bug.cgi?id=46611.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D83921
This diff starts the implementation of llvm-libtool-darwin
(an llvm based replacement of cctool's libtool).
Libtool is used for creating static and dynamic libraries
from a bunch of object files given as input.
Reviewed by alexshap, smeenai, jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D82923
From @erichkeane:
```
This patch doesn't seem to build for me:
/iusers/ekeane1/workspaces/llvm-project/llvm/tools/llvm-exegesis/lib/X86/X86Counter.cpp: In function ‘llvm::Error llvm::exegesis::parseDataBuffer(const char*, size_t, const void*, const void*, llvm::SmallVector<long int, 4>*)’:
/iusers/ekeane1/workspaces/llvm-project/llvm/tools/llvm-exegesis/lib/X86/X86Counter.cpp:99:37: error: ‘struct perf_branch_entry’ has no member named ‘cycles’
CycleArray->push_back(Entry.cycles);
I'm on RHEL7, so I have kernel 3.10, so it doesn't have 'cycles'.
According ot this: https://elixir.bootlin.com/linux/v4.3/source/include/uapi/linux/perf_event.h#L963 kernel 4.3 is the first time that 'cycles' appeared in this structure.
```
Starting with Skylake, the LBR contains the precise number of cycles between the two
consecutive branches.
Making use of this will hopefully make the measurements more precise than the
existing methods of using RDTSC.
Differential Revision: https://reviews.llvm.org/D77422
In D83482 we agreed to name e_* fields that are used for overriding
values (like e_phoff) as EPh* (e.g. EPhOff).
Currently we have a set of e_sh* fields that are named inconsistently
with this rule. This patch renames all of them.
Differential revision: https://reviews.llvm.org/D83766
This patch adds support for archive files as inputs to llvm-link. One
of the use-cases is for OpenMP, where device specific libraries need
to be extracted from libraries containing bundled object files. The
clang-offload-bundler will support extracting these archives, which
will be passed into llvm-link, see https://reviews.llvm.org/D80816.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D81109
llvm-objdump currently calls report_fatal_error() when the e_phoff field is invalid.
This is tested by elf-invalid-phdr.test which has the following issues:
1) It uses a precompiled object.
2) it could be a part of invalid.test.
3) It tests the Object lib, but we have no separate test for llvm-objdump.
This patch addresses issues mentioned.
Differential revision: https://reviews.llvm.org/D83559
program_headers() returns the list of program headers. This change allows
to continue attempt of dumping when something is wrong with program headers.
Differential revision: https://reviews.llvm.org/D83554
This adds `EPhOff`, `EPhEntSize` and `EPhNum` keys.
Will be useful for creating broken objects for testing llvm-readelf.
Differential revision: https://reviews.llvm.org/D83482
We have an issue currently: --dyn-relocations always prints the following
relocation header when dumping `DynPLTRelRegion`:
"Offset Info Type Symbol's Value Symbol's Name + Addend"
I.e. even for an empty object, --dyn-relocations still prints this.
It is a easy to fix bug, but we have no dedicated test case for this option.
(we have a dynamic-reloc-no-section-headers.test, which has a slightly different purpose).
This patch adds a test and fixes the behavior.
Differential revision: https://reviews.llvm.org/D83387
Summary:
This handles all three places where attributes could currently be - `GlobalVariable`, `Function` and `CallBase`.
For last two, it correctly handles all three possible attribute locations (return value, arguments and function itself)
There was a previous attempt at it D73853,
which was committed in rGfc62b36a000681c01e993242b583c5ec4ab48a3c,
but then reverted all the way back in rGb12176d2aafa0ccb2585aa218fc3b454ba84f2a9
due to some (osx?) test failures.
Reviewers: nickdesaulniers, dblaikie, diegotf, george.burgess.iv, jdoerfert, Tyker, arsenm
Reviewed By: nickdesaulniers
Subscribers: wdng, MaskRay, arsenm, llvm-commits, mgorny
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83351
This adds the --debug-vars option to llvm-objdump, which prints
locations (registers/memory) of source-level variables alongside the
disassembly based on DWARF info. A vertical line is printed for each
live-range, with a label at the top giving the variable name and
location, and the position and length of the line indicating the program
counter range in which it is valid.
Differential revision: https://reviews.llvm.org/D70720
There's no reason to introduce a new option for the NPM.
The various PGO options are shared in this manner.
Reviewed By: echristo
Differential Revision: https://reviews.llvm.org/D83368
Summary:
I think, this results in much more understandable/readable flow.
At least the original logic was perhaps the most hard thing for me to grasp when taking an initial look on the delta passes.
Reviewers: nickdesaulniers, dblaikie, diegotf, george.burgess.iv
Reviewed By: nickdesaulniers
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83287
This is a follow-up for D83225. This does the following:
1) Adds missing tests for existent errors.
2) Stops using `unwrapOrError` to propagate errors to caller.
(I am trying to get rid of all `unwrapOrErr` calls in the llvm-readelf code).
3) Improves error messages reported slightly.
Differential revision: https://reviews.llvm.org/D83314
`MipsGOTParser` is a helper class that is used to dump MIPS GOT and PLT.
There is a problem with it: it might call report_fatal_error() on invalid input.
When this happens, the tool reports a crash:
```
# command stderr:
LLVM ERROR: Cannot find PLTGOT dynamic table tag.
PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backt
race.
Stack dump:
...
```
Such error were not tested. In this patch I've refactored `MipsGOTParser`:
I've splitted handling of GOT and PLT to separate methods. This allows to propagate
any possible errors to caller and should allow to dump the PLT when something is wrong
with the GOT and vise versa in the future.
I've added tests for each `report_fatal_error()`
and now calling the `reportError` instead. In the future we might want to switch to
reporting warnings, but it requres the additional testing and should
be performed independently.
I've kept `unwrapOrError` calls untouched for now as I'd like to focus on eliminating
`report_fatal_error` calls in this patch only.
Differential revision: https://reviews.llvm.org/D83225
Currently, llvm-readobj calls `report_fatal_error` when an object has
both REL and RELA dynamic relocations.
llvm-readelf is able to handle this case properly. This patch adds such a test case
and adjusts the llvm-readobj code to follow (and be consistent with its own RELR and PLTREL cases).
Differential revision: https://reviews.llvm.org/D83232
It is possible to:
1) Avoid using the `unwrapOrError` calls and hence allow to continue dumping even when
something is not OK with one of SHT_LLVM_LINKER_OPTIONS sections.
2) replace `reportWarning` with `reportUniqueWarning` calls. In this method it is no-op,
because it is not possible to have a duplicated warnings anyways, but since we probably
want to switch to `reportUniqueWarning` globally, this is a good thing to do.
This patch addresses both these points.
Differential revision: https://reviews.llvm.org/D83131
This introduces `printHashTableSymbols` and
`printGNUHashTableSymbols` to split the `printHashSymbols`.
It makes the code more readable and consistent.
Differential revision: https://reviews.llvm.org/D83040
This is a followup for D83129.
It is possible to make `getStaticSymbolName` report warnings inside
and return the "<?>" on a error. This allows to encapsulate errors handling
and slightly simplifies the logic in callers code.
Differential revision: https://reviews.llvm.org/D83208
The code we have currently reports an error if something is not right with the
profile section. Instead we can report a warning and continue dumping when it is possible.
This patch does it.
Differential revision: https://reviews.llvm.org/D83129
We might crash when the dynamic symbols table is empty (or not found)
and --hash-symbols is requested. Both .hash and .gnu.hash logic is affected.
The patch fixes this issue.
Differential revision: https://reviews.llvm.org/D83037
This diff merges all options for llvm-install-name-tool under a single
function processLoadCommands. Also adds another test case for -add_rpath
option.
Test plan: make check-all
Reviewed by: jhenderson, alexshap, smeenai, Ktwu
Differential Revision: https://reviews.llvm.org/D82812
Summary:
This would have been marginally useful to me during/for rG7ea46aee3670981827c04df89b2c3a1cbdc7561b.
With ongoing migration to representing assumes via operand bundles on the assume, this will be gradually more useful.
Reviewers: nickdesaulniers, diegotf, dblaikie, george.burgess.iv, jdoerfert, Tyker
Reviewed By: nickdesaulniers
Subscribers: hiraditya, mgorny, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83177
This diff merges all options for llvm-install-name-tool under a single
function processLoadCommands. Also adds another test case for -add_rpath
option.
Test plan: make check-all
Reviewed by: jhenderson, alexshap, smeenai, Ktwu
Differential Revision: https://reviews.llvm.org/D82812
The new option works like the existing LLVM_TABLEGEN, and
LLVM_CONFIG_PATH options. Instead of building llvm-nm, the build uses
the executable defined by LLVM_NM.
This is useful for cross-compilation scenarios where the host cannot run
the cross-compiled tool, and recursing into another cmake build is not
an option (due to required DEFINE's, for example).
Reviewed By: smeenai
Differential Revision: https://reviews.llvm.org/D83022
This patch resolves crash that occurs when user wanted to remove all
symbols and add a brand new one using:
```
llvm-objcopy -R .symtab --add-symbol foo=1234 in.o out.o
```
Before these changes the symbol table internally being null when adding
new symbols. For now we will regenerate symtab in this case.
This fixes: https://bugs.llvm.org/show_bug.cgi?id=43930
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D82935
As it can be seen in newly-added (previously-crashing) test-case,
there can be a situation where multiple GV's are used in instr,
and we would schedule the same instruction to be deleted several times,
crashing when trying to delete it the second time.
We could either store WeakVH (done here), or use something set-like.
I think using WeakVH is prevalent in these cases elsewhere.
As it can be seen in newly-added (previously-crashing) test-case,
there can be a situation where multiple arguments are used in instr,
and we would schedule the same instruction to be deleted several times,
crashing when trying to delete it the second time.
We could either store WeakVH (done here), or use something set-like.
I think using WeakVH is prevalent in these cases elsewhere.
This patch helps add the missing context `IsGNUStyle`. Before this patch, yaml2obj cannot parse the YAML description of 'debug_gnu_pubnames' and 'debug_gnu_pubtypes' correctly due to the missing context.
In other words, if we have
```
DWARF:
debug_gnu_pubtypes:
Length:
TotalLength: 0x1234
Version: 2
UnitOffset: 0x1234
UnitSize: 0x4321
Entries:
- DieOffset: 0x12345678
Name: abc
Descriptor: 0x00 ## Descriptor can never be mapped into Entry.Descriptor
```
yaml2obj will complain that "error: unknown key 'Descriptor'".
This patch helps resolve this problem.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D82435
This is a follow-up for D82955, which allows to continue dumping when a symbol table is broken.
When we are unable to get the string table and trying to print symbols,
the existent tool logic together with D82955 reports an error:
"st_name (0x??) is past the end of the string table of size 0x??"
Though, when there is no string table, this message becomes misleading and excessive.
It is easy to fix it though and that is what this patch does.
Differential revision: https://reviews.llvm.org/D83042
When the --symbols option/--dyn-symbols is given we might report an
error and exit when something goes not right. E.g. when the SHT_SYMTAB
section is broken. Though we could report a warning and try to continue
dumping instead in many cases.
This patch removes `unwrapOrErr` calls from the code involved in the
flow described.
Differential revision: https://reviews.llvm.org/D82955
gnu size has a number of special cases regarding REL, RELA and STRTAB
sections being considered in size output. To avoid unnecessary
complexity this commit makes llvm size outputs these sections in cases
they have the SHF_ALLOC flag.
Differential Revision: https://reviews.llvm.org/D82479
When we deriving the number of symbols from the DT_HASH table, we can crash when
calculate the number of symbols in the symbol table when SHT_DYNSYM
has sh_entsize == 0.
The patch fixes the issue.
Differential revision: https://reviews.llvm.org/D82877
Implement `-change` option for install-name-tool. The behavior exactly
matches that of cctools. Depends on D82410.
Reviewed By: jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D82613
Implement `-id` option for install-name-tool. Differences from cctool's
behavior:
- Does **NOT** throw an error if multiple -id options are specified.
Instead, picks the last one.
- Throws an error in case empty id is specified.
Reviewed By: jhenderson, smeenai
Differential Revision: https://reviews.llvm.org/D82410
Currently we have to override all macros that are declared. But in many
cases it is convenient to use default values and to override only
a particular one or two.
This provides a way to set a default value for any macro:
```
Symbols:
- Name: [[FOO=foo]]
```
Differential revision: https://reviews.llvm.org/D82455
'InitialLength' is replaced with 'Format' (DWARF32 by default) and 'Length' in this patch.
Besides, test cases for DWARFv4 and DWARFv5, DWARF32 and DWARF64 is
added.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D82622
This diff addresses the old TODO in MachOObjcopy.cpp and
correctly sets the page size used for alignment of segments.
In particular, now llvm-objcopy's output is consistent
with the input (the alignment of vmsize doesn't change).
Test plan:
1. make check-all
2. verify that a binary copied via llvm-objcopy now correctly works on iOS.
Differential revision: https://reviews.llvm.org/D82503
SHT_GROUP sections contain a reference to a symbol indicating their
"signature" symbol. The symbol table containing this symbol is referred
to by the group section's sh_link field. If llvm-objcopy is instructed
to remove the symbol table, it will emit an error.
This fixes https://bugs.llvm.org/show_bug.cgi?id=46153.
Reviewed By: jhenderson, Higuoxing
Differential Revision: https://reviews.llvm.org/D82274
This diff implements -rpath option for llvm-install-name-tool
which replaces the rpath value in the specified Mach-O binary.
Patch by Sameer Arora!
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D82051
LBR contains (up to) 16 entries for last x branches and the X86LBRCounter (from D77422) should be able to return all those.
Currently, it just returns the latest entry, which could lead to mis-leading measurements.
This patch aslo changes the LatencyBenchmarkRunner to accommodate multi-value readings.
https://reviews.llvm.org/D81050
Summary: Dumping contents of `.llvm.call-graph-profile` section of COFF in the same format as ELF.
Reviewers: jhenderson, MaskRay, hans
Reviewed By: jhenderson
Subscribers: grimar, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81894
Summary:
This somewhat matches the --aa-pipeline option, which separates out any
AA analyses to make sure they run before other passes.
Makes check-llvm failures under new PM go from 2356 -> 2303.
AA passes are not handled by PassBuilder::parsePassPipeline() but rather
PassBuilder::parseAAPipeline(), which is why this fixes some failures.
Reviewers: asbirlea, hans, ychen, leonardchan
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82488
There is no reason to report an error in `printSectionHeaders()`, we can report
a warning and continue dumping. This is what the patch does.
Differential revision: https://reviews.llvm.org/D82462
Summary:
Add the --hot-func-list feature to llvm-profdata show for sample profiles. This feature prints a list of hot functions whose max sample count are above the 99% threshold, with their numbers of total samples, total samples percentage, max samples, entry samples, and their function names.
Test Plan:
Reviewers: wenlei, hoyFB
Reviewed By: wenlei, hoyFB
Subscribers: hoyFB, wenlei, weihe, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82355
This diff updates the help messages for llvm-objcopy, llvm-strip and
llvm-install-name-tool.
Patch by Sameer Arora!
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D81907
Start using the `checkGNUHashTable` helper which was recently introduced to report
a proper warning when a GNU hash table goes past the end of the file.
Differential revision: https://reviews.llvm.org/D82449
Summary:
In order to enable mass testing of opt under NPM, specifically passes
specified via -foo-pass.
This is gated under a new opt flag -enable-new-pm. Currently
the pass flag parser looks for legacy PM passes with the name "foo" (for
opt arg "-foo") and creates a PassInfo for each one. Here we take the
(legacy PM) pass name and try to match it with one defined in (NPM)
PassRegistry.def. Ultimately if we want all tests to pass like this,
we'll need to port all passes to NPM and register them in
PassRegistry.def under the same name as they were reigstered in the
legacy PM.
Maybe at some point we'll migrate all -foo to --passes=foo, but that
would be after the NPM switch.
Flipping on the flag causes 2XXX failures under check-llvm. By far most
of them are passes either not ported to NPM or don't have the same name
in PassRegistry.def as their old name.
Reviewers: hans, echristo, asbirlea, leonardchan
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82320
Fangrui Song