This patch allows internalising globals if all accesses to them
(from live functions) are from non-volatile load instructions
Differential revision: https://reviews.llvm.org/D49362
llvm-svn: 346584
In SimplifyCFG when given a conditional branch that goes to BB1 and BB2, the hoisted common terminator instruction in the two blocks, caused debug line records associated with subsequent select instructions to become ambiguous. It causes the debugger to display unreachable source lines.
Differential Revision: https://reviews.llvm.org/D53390
llvm-svn: 346481
This eliminates the outlining penalty for llvm.trap/unreachable, because
callers no longer have to emit cleanup/ret instructions after calling an
outlined `noreturn` function.
rdar://45523626
llvm-svn: 346421
The lowering for a call to eh_typeid_for changes when it's moved from
one function to another.
There are several proposals for fixing this issue in llvm.org/PR39545.
Until some solution is in place, do not allow CodeExtractor to extract
calls to eh_typeid_for, as that results in serious miscompilations.
llvm-svn: 346256
When CodeExtractor moves instructions to a new function, debug
intrinsics referring to those instructions within the parent function
become invalid.
This results in the same verifier failure which motivated r344545, about
function-local metadata being used in the wrong function.
llvm-svn: 346255
Clang's -Wimplicit-fallthrough implementation warns on this. I built
clang with GCC 7.3 in +asserts and -asserts mode, and GCC doesn't warn
on this in either configuration. I think it is unnecessary. I separated
it from the large mechanical patch (https://reviews.llvm.org/D53950) in
case I am wrong and it has to be reverted.
llvm-svn: 345876
As K has to dominate I, IIUC I's range metadata must be a subset of
K's. After Eli's recent clarification to the LangRef, loading a value
outside of the range is undefined behavior.
Therefore if I's range contains elements outside of K's range and we would load
one such value, K would cause undefined behavior.
In cases like hoisting/sinking, we still want the most generic range
over all code paths to/from the hoist/sink point. As suggested in the
patches related to D47339, I will refactor the handling of those
scenarios and try to decouple it from this function as follow up, once
we switched to a similar handling of metadata in most of
combineMetadata.
I updated some tests checking mostly the merging of metadata to keep the
metadata of to dominating load. The most interesting one is probably test8 in
test/Transforms/JumpThreading/thread-loads.ll. It contained a comment
about the alias metadata preventing us to eliminate the branch, but it
seem like the actual problem currently is that we merge the ranges of
both loads and cannot eliminate the icmp afterwards. With this patch, we
manage to eliminate the icmp, as the range of the first load excludes 8.
Reviewers: efriedma, nlopes, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D51629
llvm-svn: 345456
When SimplifyCFG changes the PHI node into a select instruction, the debug line records becomes ambiguous. It causes the debugger to display unreachable source lines.
Differential Revision: https://reviews.llvm.org/D53287
llvm-svn: 345250
The current splitting algorithm works in three stages:
1) Identify cold blocks, then
2) Use forward/backward propagation to mark hot blocks, then
3) Grow a SESE region of blocks *outside* of the set of hot blocks and
start outlining.
While testing this pass on Apple internal frameworks I noticed that some
kinds of control flow (e.g. loops) are never outlined, even though they
unconditionally lead to / follow cold blocks. I noticed two other issues
related to how cold regions are identified:
- An inconsistency can arise in the internal state of the hotness
propagation stage, as a block may end up in both the ColdBlocks set
and the HotBlocks set. Further inconsistencies can arise as these sets
do not match what's in ProfileSummaryInfo.
- It isn't necessary to limit outlining to single-exit regions.
This patch teaches the splitting algorithm to identify maximal cold
regions and outline them. A maximal cold region is defined as the set of
blocks post-dominated by a cold sink block, or dominated by that sink
block. This approach can successfully outline loops in the cold path. As
a side benefit, it maintains less internal state than the current
approach.
Due to a limitation in CodeExtractor, blocks within the maximal cold
region which aren't dominated by a single entry point (a so-called "max
ancestor") are filtered out.
Results:
- X86 (LNT + -Os + externals): 134KB of TEXT were outlined compared to
47KB pre-patch, or a ~3x improvement. Did not see a performance impact
across two runs.
- AArch64 (LNT + -Os + externals + Apple-internal benchmarks): 149KB
of TEXT were outlined. Ditto re: performance impact.
- Outlining results improve marginally in the internal frameworks I
tested.
Follow-ups:
- Outline more than once per function, outline large single basic
blocks, & try to remove unconditional branches in outlined functions.
Differential Revision: https://reviews.llvm.org/D53627
llvm-svn: 345209
Summary:
The current default of appending "_"+entry block label to the new
extracted cold function breaks demangling. Change the deliminator from
"_" to "." to enable demangling. Because the header block label will
be empty for release compile code, use "extracted" after the "." when
the label is empty.
Additionally, add a mechanism for the client to pass in an alternate
suffix applied after the ".", and have the hot cold split pass use
"cold."+Count, where the Count is currently 1 but can be used to
uniquely number multiple cold functions split out from the same function
with D53588.
Reviewers: sebpop, hiraditya
Subscribers: llvm-commits, erik.pilkington
Differential Revision: https://reviews.llvm.org/D53534
llvm-svn: 345178
Summary:
In several places in the code we use the following pattern:
if (hasUnaryFloatFn(&TLI, Ty, LibFunc_tan, LibFunc_tanf, LibFunc_tanl)) {
[...]
Value *Res = emitUnaryFloatFnCall(X, TLI.getName(LibFunc_tan), B, Attrs);
[...]
}
In short, we check if there is a lib-function for a certain type, and then
we _always_ fetch the name of the "double" version of the lib function and
construct a call to the appropriate function, that we just checked exists,
using that "double" name as a basis.
This is of course a problem in cases where the target doesn't support the
"double" version, but e.g. only the "float" version.
In that case TLI.getName(LibFunc_tan) returns "", and
emitUnaryFloatFnCall happily appends an "f" to "", and we erroneously end
up with a call to a function called "f".
To solve this, the above pattern is changed to
if (hasUnaryFloatFn(&TLI, Ty, LibFunc_tan, LibFunc_tanf, LibFunc_tanl)) {
[...]
Value *Res = emitUnaryFloatFnCall(X, &TLI, LibFunc_tan, LibFunc_tanf,
LibFunc_tanl, B, Attrs);
[...]
}
I.e instead of first fetching the name of the "double" version and then
letting emitUnaryFloatFnCall() add the final "f" or "l", we let
emitUnaryFloatFnCall() fetch the right name from TLI.
Reviewers: eli.friedman, efriedma
Reviewed By: efriedma
Subscribers: efriedma, bjope, llvm-commits
Differential Revision: https://reviews.llvm.org/D53370
llvm-svn: 344725
Summary:
Extend LCSSA so that debug values outside loops are rewritten to
use the PHI nodes that the pass creates.
This fixes PR39019. In that case, we ran LCSSA on a loop that
was later on vectorized, which left us with something like this:
for.cond.cleanup:
%add.lcssa = phi i32 [ %add, %for.body ], [ %34, %middle.block ]
call void @llvm.dbg.value(metadata i32 %add,
ret i32 %add.lcssa
for.body:
%add =
[...]
br i1 %exitcond, label %for.cond.cleanup, label %for.body
which later resulted in the debug.value becoming undef when
removing the scalar loop (and the location would have probably
been wrong for the vectorized case otherwise).
As we now may need to query the AvailableVals cache more than
once for a basic block, FindAvailableVals() in SSAUpdaterImpl is
changed so that it updates the cache for blocks that we do not
create a PHI node for, regardless of the block's number of
predecessors. The debug value in the attached IR reproducer
would not be properly rewritten without this.
Debug values residing in blocks where we have not inserted any
PHI nodes are currently left as-is by this patch. I'm not sure
what should be done with those uses.
Reviewers: mattd, aprantl, vsk, probinson
Reviewed By: mattd, aprantl
Subscribers: jmorse, gbedwell, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D53130
llvm-svn: 344589
Variable updates within the outlined function are invisible to
debuggers. This could be improved by defining a DISubprogram for the
new function. For the moment, simply erase the debug intrinsics instead.
This fixes verifier failures about function-local metadata being used in
the wrong function, seen while testing the hot/cold splitting pass.
rdar://45142482
Differential Revision: https://reviews.llvm.org/D53267
llvm-svn: 344545
by `getTerminator()` calls instead be declared as `Instruction`.
This is the biggest remaining chunk of the usage of `getTerminator()`
that insists on the narrow type and so is an easy batch of updates.
Several files saw more extensive updates where this would cascade to
requiring API updates within the file to use `Instruction` instead of
`TerminatorInst`. All of these were trivial in nature (pervasively using
`Instruction` instead just worked).
llvm-svn: 344502
This requires updating a number of .cpp files to adapt to the new API.
I've just systematically updated all uses of `TerminatorInst` within
these files te `Instruction` so thta I won't have to touch them again in
the future.
llvm-svn: 344498
LLVM APIs. There weren't very many.
We still have the instruction visitor, and APIs with TerminatorInst as
a return type or an output parameter.
llvm-svn: 344494
InstCombine keeps a worklist and assumes that optimizations don't
eraseFromParent() the instruction, which SimplifyLibCalls violates. This change
adds a new callback to SimplifyLibCalls to let clients specify their own hander
for erasing actions.
Differential Revision: https://reviews.llvm.org/D52729
llvm-svn: 344251
There is a transform that may replace `lshr (x+1), 1` with `lshr x, 1` in case
if it can prove that the result will be the same. However the initial instruction
might have an `exact` flag set, and it now should be dropped unless we prove
that it may hold. Incorrectly set `exact` attribute may then produce poison.
Differential Revision: https://reviews.llvm.org/D53061
Reviewed By: sanjoy
llvm-svn: 344223
When SimplifyCFG changes the PHI node into a select instruction, the debug line records becomes ambiguous. It causes the debugger to display unreachable source lines.
Differential Revision: https://reviews.llvm.org/D52887
llvm-svn: 344120
Summary:
At some point in the past the recursion in DominatesMergePoint used to pass null for AggressiveInsts as part of the recursion. It no longer does this. So there is no way for AggressiveInsts to be null.
This passes it by reference and removes the null check to make this explicit.
Reviewers: efriedma, reames
Reviewed By: efriedma
Subscribers: xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D52575
llvm-svn: 343828
Summary:
The llvm::SimplifyCFG function creates a SimplifyCFGOpt object and calls run on it. There were numerous places reached from this run function that called back out llvm::SimplifyCFG which would create another SimplifyCFGOpt object. This is an inefficient use of stack space at minimum. We are also not passing along the LoopHeaders pointer passed into the outer llvm::SimplifyCFG call. So if its not null we lose it on the first recursion and get nullptr from there on.
This patch adds an outer loop around the main BasicBlock simplifying code and adds a flag to the SimplifyCFGOpt class that can be set by to request another iteration. I don't think we can iterate based just on the change flag alone since some of the simplifications delete a basic block entirely leaving nothing to iterate on.
Reviewers: bogner, eli.friedman, reames
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52760
llvm-svn: 343816
getNumUses is linear in the number of uses. Since we're looking for a specific use count, we can use hasNUses which will stop as soon as it determines there are more than N uses instead of walking all of them.
llvm-svn: 343550
There are a few leftovers in rL343163 which span two lines. This commit
changes these llvm::sort(C.begin(), C.end, ...) to llvm::sort(C, ...)
llvm-svn: 343426
In this patch, I'm adding an extra check to the Latch's terminator in llvm::UnrollRuntimeLoopRemainder,
similar to how it is already done in the llvm::UnrollLoop.
The compiler would crash if this function is called with a malformed loop.
Patch by Rodrigo Caetano Rocha!
Differential Revision: https://reviews.llvm.org/D51486
llvm-svn: 342958
This is still unsafe for long double, we will transform things into tanl
even if tanl is for another type. But that's for someone else to fix.
llvm-svn: 342542
When SimplifyCFG changes the PHI node into a select instruction, the debug information becomes ambiguous. It causes the debugger to display wrong variable value.
Differential Revision: https://reviews.llvm.org/D51976
llvm-svn: 342527
Previously the alignment on the newly created switch table data was not set,
meaning that DataLayout::getPreferredAlignment was free to overalign it to 16
bytes. This causes unnecessary code bloat.
Differential Revision: https://reviews.llvm.org/D51800
llvm-svn: 342039
Summary:
The InductionDescriptor and RecurrenceDescriptor classes basically analyze the IR to identify the respective IVs. So, it is better to have them in the "Analysis" directory instead of the "Transforms" directory.
The rationale for this is to make the Induction and Recurrence descriptor classes available for analysis passes. Currently including them in an analysis pass produces link error (http://lists.llvm.org/pipermail/llvm-dev/2018-July/124456.html).
Induction and Recurrence descriptors are moved from Transforms/Utils/LoopUtils.h|cpp to Analysis/IVDescriptors.h|cpp.
Reviewers: dmgreen, llvm-commits, hfinkel
Reviewed By: dmgreen
Subscribers: mgorny
Differential Revision: https://reviews.llvm.org/D51153
llvm-svn: 342016
Summary:
Move InductionDescriptor::transform() routine from LoopUtils to its only uses in LoopVectorize.cpp.
Specifically, the function is renamed as InnerLoopVectorizer::emitTransformedIndex().
This is a child to D51153.
Reviewers: dmgreen, llvm-commits
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D51837
llvm-svn: 341776
Summary:
Block splitting is done with either identical edges being merged, or not.
Only critical edges can be split without merging identical edges based on an option.
Teach the memoryssa updater to take this into account: for the same edge between two blocks only move one entry from the Phi in Old to the new Phi in New.
Reviewers: george.burgess.iv
Subscribers: sanjoy, jlebar, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D51563
llvm-svn: 341709
Load Hardening.
Wires up the existing pass to work with a proper IR attribute rather
than just a hidden/internal flag. The internal flag continues to work
for now, but I'll likely remove it soon.
Most of the churn here is adding the IR attribute. I talked about this
Kristof Beyls and he seemed at least initially OK with this direction.
The idea of using a full attribute here is that we *do* expect at least
some forms of this for other architectures. There isn't anything
*inherently* x86-specific about this technique, just that we only have
an implementation for x86 at the moment.
While we could potentially expose this as a Clang-level attribute as
well, that seems like a good question to defer for the moment as it
isn't 100% clear whether that or some other programmer interface (or
both?) would be best. We'll defer the programmer interface side of this
for now, but at least get to the point where the feature can be enabled
without relying on implementation details.
This also allows us to do something that was really hard before: we can
enable *just* the indirect call retpolines when using SLH. For x86, we
don't have any other way to mitigate indirect calls. Other architectures
may take a different approach of course, and none of this is surfaced to
user-level flags.
Differential Revision: https://reviews.llvm.org/D51157
llvm-svn: 341363
Generalize the simplification of `pow(2.0, y)` to `pow(2.0 ** n, y)` for all
scalar and vector types.
This improvement helps some benchmarks in SPEC CPU2000 and CPU2006, such as
252.eon, 447.dealII, 453.povray. Otherwise, no significant regressions on
x86-64 or A64.
Differential revision: https://reviews.llvm.org/D49273
llvm-svn: 341095
This reverts commit r340997.
This change turned out not to be NFC after all, but e.g. causes
clang to crash when building the linux kernel for aarch64.
llvm-svn: 341031
These classes don't make any changes to IR and have no reason to be in
Transform/Utils. This patch moves them to Analysis folder. This will allow
us reusing these classes in some analyzes, like MustExecute.
llvm-svn: 341015
The cost modeling was not accounting for the fact we were duplicating the instruction once per predecessor. With a default threshold of 1, this meant we were actually creating #pred copies.
Adding to the fun, there is *absolutely no* test coverage for this. Simply bailing for more than one predecessor passes all checked in tests.
llvm-svn: 341001
Expand the simplification of `pow(exp{,2}(x), y)` to all FP types.
This improvement helps some benchmarks in SPEC CPU2000 and CPU2006, such as
252.eon, 447.dealII, 453.povray. Otherwise, no significant regressions on
x86-64 or A64.
Differential revision: https://reviews.llvm.org/D51195
llvm-svn: 340948
Generalize the simplification of `pow(2.0, y)` to `pow(2.0 ** n, y)` for all
scalar and vector types.
This improvement helps some benchmarks in SPEC CPU2000 and CPU2006, such as
252.eon, 447.dealII, 453.povray. Otherwise, no significant regressions on
x86-64 or A64.
Differential revision: https://reviews.llvm.org/D49273
llvm-svn: 340947
We have multiple places in code where we try to identify whether or not
some instruction is a guard. This patch factors out this logic into a separate
utility function which works uniformly in all places.
Differential Revision: https://reviews.llvm.org/D51152
Reviewed By: fedor.sergeev
llvm-svn: 340921
This patch creates file GuardUtils which will contain logic for work with guards
that can be shared across different passes.
Differential Revision: https://reviews.llvm.org/D51151
Reviewed By: fedor.sergeev
llvm-svn: 340914
Summary:
This fixes PR31105.
There is code trying to delete dead code that does so by e.g. checking if
the single predecessor of a block is the block itself.
That check fails on a block like this
bb:
br i1 undef, label %bb, label %bb
since that has two (identical) predecessors.
However, after the check for dead blocks there is a call to
ConstantFoldTerminator on the basic block, and that call simplifies the
block to
bb:
br label %bb
Therefore we now do the call to ConstantFoldTerminator before the check if
the block is dead, so it can realize that it really is.
The original behavior lead to the block not being removed, but it was
simplified as above, and then we did a call to
Dest->replaceAllUsesWith(&*I);
with old and new being equal, and an assertion triggered.
Reviewers: chandlerc, fhahn
Reviewed By: fhahn
Subscribers: eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D51280
llvm-svn: 340820
Fix the issue of duplicating the call to `exp{,2}()` when it's nested in
`pow()`, as exposed by rL340462.
Differential revision: https://reviews.llvm.org/D51194
llvm-svn: 340784
We have a class `ImplicitControlFlowTracking` which allows us to keep track of
instructions that can abnormally exit and answer queries like "whether or not
there is side-exiting instruction above this instruction in its block".
We may want to have the similar tracking for other types of "special" instructions,
for example instructions that write memory.
This patch separates ImplicitControlFlowTracking into two classes, isolating all
general logic not related to implicit control flow into its parent class. We can
later make another child of this class to keep track of instructions that write
memory.
The motivation for that is that we want to make these checks efficiently in the
patch https://reviews.llvm.org/D50891.
NOTE: The naming of the parent class is not super cool, but the other options we
have are hardly better. Please feel free to rename it as NFC if you think you've
found a more informative name for it.
Differential Revision: https://reviews.llvm.org/D50954
Reviewed By: fedor.sergeev
llvm-svn: 340728
This is a bit awkward in a handful of places where we didn't even have
an instruction and now we have to see if we can build one. But on the
whole, this seems like a win and at worst a reasonable cost for removing
`TerminatorInst`.
All of this is part of the removal of `TerminatorInst` from the
`Instruction` type hierarchy.
llvm-svn: 340701
`isExceptionalTermiantor` and implement it for opcodes as well following
the common pattern in `Instruction`.
Part of removing `TerminatorInst` from the `Instruction` type hierarchy
to make it easier to share logic and interfaces between instructions
that are both terminators and not terminators.
llvm-svn: 340699
The core get and set routines move to the `Instruction` class. These
routines are only valid to call on instructions which are terminators.
The iterator and *generic* range based access move to `CFG.h` where all
the other generic successor and predecessor access lives. While moving
the iterator here, simplify it using the iterator utilities LLVM
provides and updates coding style as much as reasonable. The APIs remain
pointer-heavy when they could better use references, and retain the odd
behavior of `operator*` and `operator->` that is common in LLVM
iterators. Adjusting this API, if desired, should be a follow-up step.
Non-generic range iteration is added for the two instructions where
there is an especially easy mechanism and where there was code
attempting to use the range accessor from a specific subclass:
`indirectbr` and `br`. In both cases, the successors are contiguous
operands and can be easily iterated via the operand list.
This is the first major patch in removing the `TerminatorInst` type from
the IR's instruction type hierarchy. This change was discussed in an RFC
here and was pretty clearly positive:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123407.html
There will be a series of much more mechanical changes following this
one to complete this move.
Differential Revision: https://reviews.llvm.org/D47467
llvm-svn: 340698
This patch makes the DoesKMove argument non-optional, to force people
to think about it. Most cases where it is false are either code hoisting
or code sinking, where we pick one instruction from a set of
equal instructions among different code paths.
Reviewers: dberlin, nlopes, efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D47475
llvm-svn: 340606
Most users won't have to worry about this as all of the
'getOrInsertFunction' functions on Module will default to the program
address space.
An overload has been added to Function::Create to abstract away the
details for most callers.
This is based on https://reviews.llvm.org/D37054 but without the changes to
make passing a Module to Function::Create() mandatory. I have also added
some more tests and fixed the LLParser to accept call instructions for
types in the program address space.
Reviewed By: bjope
Differential Revision: https://reviews.llvm.org/D47541
llvm-svn: 340519
Currently CodeExtractor tries to use the next node after an invoke to
place the store for the result of the invoke, if it is an out parameter
of the region. This fails, as the invoke terminates the current BB.
In that case, we can place the store in the 'normal destination' BB, as
the result will only be available in that case.
Reviewers: davidxl, davide, efriedma
Reviewed By: davidxl
Differential Revision: https://reviews.llvm.org/D51037
llvm-svn: 340331
DAGCombiner doesn't pay attention to whether constants are opaque before doing the div by constant optimization. So BypassSlowDivision shouldn't introduce control flow that would make DAGCombiner unable to see an opaque constant. This can occur when a div and rem of the same constant are used in the same basic block. it will be hoisted, but not leave the block.
Longer term we probably need to look into the X86 immediate cost model used by constant hoisting and maybe not mark div/rem immediates for hoisting at all.
This fixes the case from PR38649.
Differential Revision: https://reviews.llvm.org/D51000
llvm-svn: 340303
This is a follow-up suggested with rL339604.
For tan(), we don't have a corresponding LLVM
intrinsic -- unlike sin/cos -- so this is the
only way/place that we can do this fold currently.
llvm-svn: 339958
Expand the number of cases when `pow(x, 0.5)` is simplified into `sqrt(x)`
by considering the math semantics with more granularity.
Differential revision: https://reviews.llvm.org/D50036
llvm-svn: 339887
Summary:
Previously, `eraseFromParent()` calls `delete` which invalidates the value of the pointer. Copying the value of the pointer later is undefined behavior in C++11 and implementation-defined (which may cause a segfault on implementations having strict pointer safety) in C++14.
This patch removes the BasicBlock pointer from related SmallPtrSet before `delete` invalidates it in the SimplifyCFG pass.
Reviewers: kuhar, dmgreen, davide, trentxintong
Reviewed By: kuhar, dmgreen
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D50717
llvm-svn: 339773
Even though this code is below a function called optimizeFloatingPointLibCall(),
we apparently can't guarantee that we're dealing with FPMathOperators, so bail
out immediately if that's not true.
llvm-svn: 339618
This is a very partial fix for the reported problem. I suspect
we do not get this fold in most motivating cases because most of
the time, the libcall would have been replaced by an intrinsic,
and that optimization is handled elsewhere...but maybe it should
be handled here?
llvm-svn: 339604
Pulled out a separate function for some code that calculates
if an inner loop iteration count is invariant to it's outer
loop.
Differential Revision: https://reviews.llvm.org/D50063
llvm-svn: 339500
In combineMetadata, we should be able to preserve K's nonnull metadata,
if K does not move. This condition should hold for all replacements by
NewGVN/GVN, but I added a bunch of assertions to verify that.
Fixes PR35038.
There probably are additional kinds of metadata that could be preserved
using similar reasoning. This is follow-up work.
Reviewers: dberlin, davide, efriedma, nlopes
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D47339
llvm-svn: 339149
This function is shared between both implementations. I am not sure if
Utils/Local.h is the best place though.
Reviewers: davide, dberlin, efriedma, xbolva00
Reviewed By: efriedma, xbolva00
Differential Revision: https://reviews.llvm.org/D47337
llvm-svn: 339138
Logic for tracking implicit control flow instructions was added to GVN to
perform PRE optimizations correctly. It appears that GVN is not the only
optimization that sometimes does PRE, so this logic is required in other
places (such as Jump Threading).
This is an NFC patch that encapsulates all ICF-related logic in a dedicated
utility class separated from GVN.
Differential Revision: https://reviews.llvm.org/D40293
llvm-svn: 339086
Properly shrink `pow()` to `powf()` as a binary function and, when no other
simplification applies, do not discard it.
Differential revision: https://reviews.llvm.org/D50113
llvm-svn: 339046
In the past, DbgInfoIntrinsic has a strong assumption that these
intrinsics all have variables and expressions attached to them.
However, it is too strong to derive the class for other debug entities.
Now, it has problems for debug labels.
In order to make DbgInfoIntrinsic as a base class for 'debug info', I
create a class for 'variable debug info', DbgVariableIntrinsic.
DbgDeclareInst, DbgAddrIntrinsic, and DbgValueInst will be derived from it.
Differential Revision: https://reviews.llvm.org/D50220
llvm-svn: 338984
Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
llvm-svn: 338969
Summary:
Previously, in the NewPM pipeline, TailCallElim recalculates the DomTree when it modifies any instruction in the Function.
For example,
```
CallInst *CI = dyn_cast<CallInst>(&I);
...
CI->setTailCall();
Modified = true;
...
if (!Modified || ...)
return PreservedAnalyses::all();
```
After applying this patch, the DomTree only recalculates if needed (plus an extra insertEdge() + an extra deleteEdge() call).
When optimizing SQLite with `-passes="default<O3>"` pipeline of the newPM, the number of DomTree recalculation decreases by 6.2%, the number of nodes visited by DFS decreases by 2.9%. The time used by DomTree will decrease approximately 1%~2.5% after applying the patch.
Statistics:
```
Before the patch:
23010 dom-tree-stats - Number of DomTree recalculations
489264 dom-tree-stats - Number of nodes visited by DFS -- DomTree
After the patch:
21581 dom-tree-stats - Number of DomTree recalculations
475088 dom-tree-stats - Number of nodes visited by DFS -- DomTree
```
Reviewers: kuhar, dmgreen, brzycki, grosser, davide
Reviewed By: kuhar, brzycki
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49982
llvm-svn: 338954
Merge the helper functions for shrinking unary and binary functions into a
single one, while keeping all their functionality. Otherwise, NFC.
llvm-svn: 338905
Summary:
Previously, `removeUnreachableBlocks` still returns true (which indicates the CFG is changed) even when all the unreachable blocks found is awaiting deletion in the DDT class.
This makes code pattern like
```
// Code modified from lib/Transforms/Scalar/SimplifyCFGPass.cpp
bool EverChanged = removeUnreachableBlocks(F, nullptr, DDT);
...
do {
EverChanged = someMightHappenModifications();
EverChanged |= removeUnreachableBlocks(F, nullptr, DDT);
} while (EverChanged);
```
become a dead loop.
Fix this by detecting whether a BasicBlock is already awaiting deletion.
Reviewers: kuhar, brzycki, dmgreen, grosser, davide
Reviewed By: kuhar, brzycki
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49738
llvm-svn: 338882
Summary:
This patch is the second in a series of patches related to the [[ http://lists.llvm.org/pipermail/llvm-dev/2018-June/123883.html | RFC - A new dominator tree updater for LLVM ]].
It converts passes (e.g. adce/jump-threading) and various functions which currently accept DDT in local.cpp and BasicBlockUtils.cpp to use the new DomTreeUpdater class.
These converted functions in utils can accept DomTreeUpdater with either UpdateStrategy and can deal with both DT and PDT held by the DomTreeUpdater.
Reviewers: brzycki, kuhar, dmgreen, grosser, davide
Reviewed By: brzycki
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48967
llvm-svn: 338814
Adds some cleaned up debug messages from back when I was writing this.
Hopefully useful to others (and myself) as to why unroll and jam is not
transforming as expected.
Differential Revision: https://reviews.llvm.org/D50062
llvm-svn: 338676
Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
llvm-svn: 338494
Summary:
When inserting lcssa Phi Nodes in the exit block
mak sure to preserve the original instructions DL.
Reviewers: vsk
Subscribers: JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D50009
llvm-svn: 338391
Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
llvm-svn: 338387
This is a follow-up for the patch rL335020. When we replace compares against
trunc with compares against wide IV, we can also replace signed predicates with
unsigned where it is legal.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D48763
llvm-svn: 338115
LowerDbgDeclare inserts a dbg.value before each use of an address
described by a dbg.declare. When inserting a dbg.value before a CallInst
use, however, it fails to append DW_OP_deref to the DIExpression.
The DW_OP_deref is needed to reflect the fact that a dbg.value describes
a source variable directly (as opposed to a dbg.declare, which relies on
pointer indirection).
This patch adds in the DW_OP_deref where needed. This results in the
correct values being shown during a debug session for a program compiled
with ASan and optimizations (see https://reviews.llvm.org/D49520). Note
that ConvertDebugDeclareToDebugValue is already correct -- no changes
there were needed.
One complication is that SelectionDAG is unable to distinguish between
direct and indirect frame-index (FRAMEIX) SDDbgValues. This patch also
fixes this long-standing issue in order to not regress integration tests
relying on the incorrect assumption that all frame-index SDDbgValues are
indirect. This is a necessary fix: the newly-added DW_OP_derefs cannot
be lowered properly otherwise. Basically the fix prevents a direct
SDDbgValue with DIExpression(DW_OP_deref) from being dereferenced twice
by a debugger. There were a handful of tests relying on this incorrect
"FRAMEIX => indirect" assumption which actually had incorrect
DW_AT_locations: these are all fixed up in this patch.
Testing:
- check-llvm, and an end-to-end test using lldb to debug an optimized
program.
- Existing unit tests for DIExpression::appendToStack fully cover the
new DIExpression::append utility.
- check-debuginfo (the debug info integration tests)
Differential Revision: https://reviews.llvm.org/D49454
llvm-svn: 338069
Create a processHeaderPhiOperands for analysing the instructions
in the aft blocks that must be moved before the loop.
Differential Revision: https://reviews.llvm.org/D49061
llvm-svn: 338033
This is a workaround and it would be better to fix this generally, but
doing it generally is quite tricky. See D48541 and PR38117.
Doing it in PredicateInfo directly allows us to use the type address to
differentiate different unnamed types, because neither the created
declarations nor the ssa_copy calls should be visible after
PredicateInfo got destroyed.
Reviewers: efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D49126
llvm-svn: 337828
Summary:
The optimizer is 10%+ slower with vs without debuginfo. I started checking where
the difference is coming from.
I compiled sqlite3.c with and without debug info from CTMark and compare the time difference.
I use Xcode Instrument to find where time is spent. This brings about 20ms, out of ~20s.
Reviewers: davide, hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D49337
llvm-svn: 337416
We no longer care about the order of blocks in these collections,
so can change to SmallPtrSets, making contains checks quicker.
Differential revision: https://reviews.llvm.org/D49060
llvm-svn: 336897
Summary:
Fixed two cases of where PHI nodes need to be updated by lowerswitch.
When lowerswitch find out that the switch default branch is not
reachable it remove the old default and replace it with the most
popular block from the cases, but it forget to update the PHI
nodes in the default block.
The PHI nodes also need to be updated when the switch is replaced
with a single branch.
Reviewers: hans, reames, arsenm
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D47203
llvm-svn: 336659
Summary:
Support for this option is needed for building Linux kernel.
This is a very frequently requested feature by kernel developers.
More details : https://lkml.org/lkml/2018/4/4/601
GCC option description for -fdelete-null-pointer-checks:
This Assume that programs cannot safely dereference null pointers,
and that no code or data element resides at address zero.
-fno-delete-null-pointer-checks is the inverse of this implying that
null pointer dereferencing is not undefined.
This feature is implemented in LLVM IR in this CL as the function attribute
"null-pointer-is-valid"="true" in IR (Under review at D47894).
The CL updates several passes that assumed null pointer dereferencing is
undefined to not optimize when the "null-pointer-is-valid"="true"
attribute is present.
Reviewers: t.p.northover, efriedma, jyknight, chandlerc, rnk, srhines, void, george.burgess.iv
Reviewed By: efriedma, george.burgess.iv
Subscribers: eraman, haicheng, george.burgess.iv, drinkcat, theraven, reames, sanjoy, xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D47895
llvm-svn: 336613
The replaceAllDbgUsesWith utility helps passes preserve debug info when
replacing one value with another.
This improves upon the existing insertReplacementDbgValues API by:
- Updating debug intrinsics in-place, while preventing use-before-def of
the replacement value.
- Falling back to salvageDebugInfo when a replacement can't be made.
- Moving the responsibiliy for rewriting llvm.dbg.* DIExpressions into
common utility code.
Along with the API change, this teaches replaceAllDbgUsesWith how to
create DIExpressions for three basic integer and pointer conversions:
- The no-op conversion. Applies when the values have the same width, or
have bit-for-bit compatible pointer representations.
- Truncation. Applies when the new value is wider than the old one.
- Zero/sign extension. Applies when the new value is narrower than the
old one.
Testing:
- check-llvm, check-clang, a stage2 `-g -O3` build of clang,
regression/unit testing.
- This resolves a number of mis-sized dbg.value diagnostics from
Debugify.
Differential Revision: https://reviews.llvm.org/D48676
llvm-svn: 336451
Summary:
When salvaging a dbg.declare/dbg.addr we should not add
DW_OP_stack_value to the DIExpression
(see test/Transforms/InstCombine/salvage-dbg-declare.ll).
Consider this example
%vla = alloca i32, i64 2
call void @llvm.dbg.declare(metadata i32* %vla, metadata !1, metadata !DIExpression())
Instcombine will turn it into
%vla1 = alloca [2 x i32]
%vla1.sub = getelementptr inbounds [2 x i32], [2 x i32]* %vla, i64 0, i64 0
call void @llvm.dbg.declare(metadata [2 x i32]* %vla1.sub, metadata !19, metadata !DIExpression())
If the GEP can be eliminated, then the dbg.declare will be salvaged
and we should get
%vla1 = alloca [2 x i32]
call void @llvm.dbg.declare(metadata [2 x i32]* %vla1, metadata !19, metadata !DIExpression())
The problem was that salvageDebugInfo did not recognize dbg.declare
as being indirect (%vla1 points to the value, it does not hold the
value), so we incorrectly got
call void @llvm.dbg.declare(metadata [2 x i32]* %vla1, metadata !19, metadata !DIExpression(DW_OP_stack_value))
I also made sure that llvm::salvageDebugInfo and
DIExpression::prependOpcodes do not add DW_OP_stack_value to
the DIExpression in case no new operands are added to the
DIExpression. That way we avoid to, unneccessarily, turn a
register location expression into an implicit location expression
in some situations (see test11 in test/Transforms/LICM/sinking.ll).
Reviewers: aprantl, vsk
Reviewed By: aprantl, vsk
Subscribers: JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D48837
llvm-svn: 336191
This is a simple implementation of the unroll-and-jam classical loop
optimisation.
The basic idea is that we take an outer loop of the form:
for i..
ForeBlocks(i)
for j..
SubLoopBlocks(i, j)
AftBlocks(i)
Instead of doing normal inner or outer unrolling, we unroll as follows:
for i... i+=2
ForeBlocks(i)
ForeBlocks(i+1)
for j..
SubLoopBlocks(i, j)
SubLoopBlocks(i+1, j)
AftBlocks(i)
AftBlocks(i+1)
Remainder Loop
So we have unrolled the outer loop, then jammed the two inner loops into
one. This can lead to a simpler inner loop if memory accesses can be shared
between the now jammed loops.
To do this we have to prove that this is all safe, both for the memory
accesses (using dependence analysis) and that ForeBlocks(i+1) can move before
AftBlocks(i) and SubLoopBlocks(i, j).
Differential Revision: https://reviews.llvm.org/D41953
llvm-svn: 336062
and diretory.
Also cleans up all the associated naming to be consistent and removes
the public access to the pass ID which was unused in LLVM.
Also runs clang-format over parts that changed, which generally cleans
up a bunch of formatting.
This is in preparation for doing some internal cleanups to the pass.
Differential Revision: https://reviews.llvm.org/D47352
llvm-svn: 336028
If a trunc has a user in a block which is not reachable from entry,
we can safely perform trunc elimination as if this user didn't exist.
llvm-svn: 335816
salvageDebugInfo() performs a check that allows it to exit early without
doing a DenseMap lookup. It's a bit neater and marginally more useful to
sink this early exit into the findDbg{Addr,Users,Values} helpers.
llvm-svn: 335642
Summary:
This is a follow-up to r334830 and r335031.
In the valueCoversEntireFragment check we now also handle
the situation when there is a variable length array (VLA)
involved, and the length of the array has been reduced to
a constant.
The ConvertDebugDeclareToDebugValue functions that are related
to PHI nodes and load instructions now avoid inserting dbg.value
intrinsics when the value does not, for certain, cover the
variable/fragment that should be described.
In r334830 we assumed that the value always covered the entire
var/fragment and we had assertions in the code to show that
assumption. However, those asserts failed when compiling code
with VLAs, so we removed the asserts in r335031. Now when we
know that the valueCoversEntireFragment check can fail also for
PHI/Load instructions we avoid to insert the faulty dbg.value
intrinsic in such situations. Compared to the Store instruction
scenario we simply drop the dbg.value here (as the variable does
not change its value due to PHI/Load, so an earlier dbg.value
describing the variable should still be valid).
Reviewers: aprantl, vsk, efriedma
Reviewed By: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48547
llvm-svn: 335580
Summary:
A reprise of D25849.
This crash was found through fuzzing some time ago and was documented in PR28879.
No check for load size has been added due to the following tests:
- Transforms/GVN/invariant.group.ll
- Transforms/GVN/pr10820.ll
These tests expect load sizes that are not a multiple of eight.
Thanks to @davide for the original patch.
Reviewers: nlopes, davide, RKSimon, reames, efriedma
Reviewed By: efriedma
Subscribers: davide, llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D48330
llvm-svn: 335294
Summary:
Two utils methods have essentially the same functionality. This is an attempt to merge them into one.
1. lib/Transforms/Utils/Local.cpp : MergeBasicBlockIntoOnlyPred
2. lib/Transforms/Utils/BasicBlockUtils.cpp : MergeBlockIntoPredecessor
Prior to the patch:
1. MergeBasicBlockIntoOnlyPred
Updates either DomTree or DeferredDominance
Moves all instructions from Pred to BB, deletes Pred
Asserts BB has single predecessor
If address was taken, replace the block address with constant 1 (?)
2. MergeBlockIntoPredecessor
Updates DomTree, LoopInfo and MemoryDependenceResults
Moves all instruction from BB to Pred, deletes BB
Returns if doesn't have a single predecessor
Returns if BB's address was taken
After the patch:
Method 2. MergeBlockIntoPredecessor is attempting to become the new default:
Updates DomTree or DeferredDominance, and LoopInfo and MemoryDependenceResults
Moves all instruction from BB to Pred, deletes BB
Returns if doesn't have a single predecessor
Returns if BB's address was taken
Uses of MergeBasicBlockIntoOnlyPred that need to be replaced:
1. lib/Transforms/Scalar/LoopSimplifyCFG.cpp
Updated in this patch. No challenges.
2. lib/CodeGen/CodeGenPrepare.cpp
Updated in this patch.
i. eliminateFallThrough is straightforward, but I added using a temporary array to avoid the iterator invalidation.
ii. eliminateMostlyEmptyBlock(s) methods also now use a temporary array for blocks
Some interesting aspects:
- Since Pred is not deleted (BB is), the entry block does not need updating.
- The entry block was being updated with the deleted block in eliminateMostlyEmptyBlock. Added assert to make obvious that BB=SinglePred.
- isMergingEmptyBlockProfitable assumes BB is the one to be deleted.
- eliminateMostlyEmptyBlock(BB) does not delete BB on one path, it deletes its unique predecessor instead.
- adding some test owner as subscribers for the interesting tests modified:
test/CodeGen/X86/avx-cmp.ll
test/CodeGen/AMDGPU/nested-loop-conditions.ll
test/CodeGen/AMDGPU/si-annotate-cf.ll
test/CodeGen/X86/hoist-spill.ll
test/CodeGen/X86/2006-11-17-IllegalMove.ll
3. lib/Transforms/Scalar/JumpThreading.cpp
Not covered in this patch. It is the only use case using the DeferredDominance.
I would defer to Brian Rzycki to make this replacement.
Reviewers: chandlerc, spatel, davide, brzycki, bkramer, javed.absar
Subscribers: qcolombet, sanjoy, nemanjai, nhaehnle, jlebar, tpr, kbarton, RKSimon, wmi, arsenm, llvm-commits
Differential Revision: https://reviews.llvm.org/D48202
llvm-svn: 335183
This utility should operate on Values, not Instructions. While I'm here,
I've also made it possible to skip emitting replacement dbg.values for
certain debug users (by having RewriteExpr return nullptr).
llvm-svn: 335152
Using OrderedInstructions::dominates as comparator for instructions in
BBs without dominance relation can cause a non-deterministic order
between such instructions. That in turn can cause us to materialize
copies in a non-deterministic order. While this does not effect
correctness, it causes some minor non-determinism in the final generated
code, because values have slightly different labels.
Without this patch, running -print-predicateinfo on a reasonably large
module produces slightly different output on each run.
This patch uses the dominator trees DFSInNum to order instruction from
different BBs, which should enforce a deterministic ordering and
guarantee that dominated instructions come after the instructions that
dominate them.
Reviewers: dberlin, efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D48230
llvm-svn: 335150
The purpose of this utility is to make it easier for optimizations to
insert replacement dbg.values for instructions they are deleting. This
is useful in situations where salvageDebugInfo is inapplicable, say,
because the new dbg.value cannot refer to an operand of the dying value.
The utility is called insertReplacementDbgValues.
It assumes that the instruction 'From' is going to be deleted, and
inserts replacement dbg.values for each debug user of 'From'. The
newly-inserted dbg.values refer to 'To' instead of 'From'. Each
replacement dbg.value has the same location and variable as the debug
user it replaces, has a DIExpression determined by the result of
'RewriteExpr' applied to an old debug user of 'From', and is placed
before 'InsertBefore'.
This should simplify future patches, like D48331.
llvm-svn: 335144
This is a fixup for r334830 causing problems in polly-aosp buildbot.
Focus in r334830 was to fix a problem seen with
ConvertDebugDeclareToDebugValue involving store instructions.
It also added some asserts to find out of similar problems
existed for the ConvertDebugDeclareToDebugValue functions
involving load and phi instructions. One of those asserts seems
to blow in the polly-aosp buildbot, so I'll revert the asserts
while debugging.
llvm-svn: 335031
This patch adds logic to deal with the following constructions:
%iv = phi i64 ...
%trunc = trunc i64 %iv to i32
%cmp = icmp <pred> i32 %trunc, %invariant
Replacing it with
%iv = phi i64 ...
%cmp = icmp <pred> i64 %iv, sext/zext(%invariant)
In case if it is legal. Specifically, if `%iv` has signed comparison users, it is
required that `sext(trunc(%iv)) == %iv`, and if it has unsigned comparison
uses then we require `zext(trunc(%iv)) == %iv`. The current implementation
bails if `%trunc` has other uses than `icmp`, but in theory we can handle more
cases here (e.g. if the user of trunc is bitcast).
Differential Revision: https://reviews.llvm.org/D47928
Reviewed By: reames
llvm-svn: 335020
This reverts commit f976cf4cca0794267f28b54e468007fd476d37d9.
I am reverting this because it causes break in a few bots and its going
to take me sometime to look at this.
llvm-svn: 334993
Summary:
Simplify blockaddress usage before giving up in MergeBlockIntoPredecessor
This is a missing small optimization in MergeBlockIntoPredecessor.
This helps with one simplifycfg test which expects this case to be handled.
Reviewers: davide, spatel, brzycki, asbirlea
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48284
llvm-svn: 334992
This is r334704 (which was reverted in r334732) with a fix for
types like x86_fp80. We need to use getTypeAllocSizeInBits and
not getTypeStoreSizeInBits to avoid dropping debug info for
such types.
Original commit msg:
> Summary:
> Do not convert a DbgDeclare to DbgValue if the store
> instruction only refer to a fragment of the variable
> described by the DbgDeclare.
>
> Problem was seen when for example having an alloca for an
> array or struct, and there were stores to individual elements.
> In the past we inserted a DbgValue intrinsics for each store,
> just as if the store wrote the whole variable.
>
> When handling store instructions we insert a DbgValue that
> indicates that the variable is "undefined", as we do not know
> which part of the variable that is updated by the store.
>
> When ConvertDebugDeclareToDebugValue is used with a load/phi
> instruction we assert that the referenced value is large enough
> to cover the whole variable. Afaict this should be true for all
> scenarios where those methods are used on trunk. If the assert
> blows in the future I guess we could simply skip to insert a
> dbg.value instruction.
>
> In the future I think we should examine which part of the variable
> that is accessed, and add a DbgValue instrinsic with an appropriate
> DW_OP_LLVM_fragment expression.
>
> Reviewers: dblaikie, aprantl, rnk
>
> Reviewed By: aprantl
>
> Subscribers: JDevlieghere, llvm-commits
>
> Tags: #debug-info
>
> Differential Revision: https://reviews.llvm.org/D48024
llvm-svn: 334830
Summary:
Do not convert a DbgDeclare to DbgValue if the store
instruction only refer to a fragment of the variable
described by the DbgDeclare.
Problem was seen when for example having an alloca for an
array or struct, and there were stores to individual elements.
In the past we inserted a DbgValue intrinsics for each store,
just as if the store wrote the whole variable.
When handling store instructions we insert a DbgValue that
indicates that the variable is "undefined", as we do not know
which part of the variable that is updated by the store.
When ConvertDebugDeclareToDebugValue is used with a load/phi
instruction we assert that the referenced value is large enough
to cover the whole variable. Afaict this should be true for all
scenarios where those methods are used on trunk. If the assert
blows in the future I guess we could simply skip to insert a
dbg.value instruction.
In the future I think we should examine which part of the variable
that is accessed, and add a DbgValue instrinsic with an appropriate
DW_OP_LLVM_fragment expression.
Reviewers: dblaikie, aprantl, rnk
Reviewed By: aprantl
Subscribers: JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D48024
llvm-svn: 334704
IndVarSimplify sometimes makes transforms basing on users that are trivially dead. In particular,
if DCE wasn't run before it, there may be a dead `sext/zext` in loop that will trigger widening
transforms, however it makes no sense to do it.
This patch teaches IndVarsSimplify ignore the mist trivial cases of that.
Differential Revision: https://reviews.llvm.org/D47974
Reviewed By: sanjoy
llvm-svn: 334567
Currently SmallSet<PointerTy> inherits from SmallPtrSet<PointerTy>. This
patch replaces such types with SmallPtrSet, because IMO it is slightly
clearer and allows us to get rid of unnecessarily including SmallSet.h
Reviewers: dblaikie, craig.topper
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D47836
llvm-svn: 334492
SmallSet forwards to SmallPtrSet for pointer types. SmallPtrSet supports iteration, but a normal SmallSet doesn't. So if it wasn't for the forwarding, this wouldn't work.
These places were found by hiding the begin/end methods in the SmallSet forwarding
llvm-svn: 334343
Eugene Leviant