Address post-commit comments from Justin Bogner. Explicitly indicate
that the dereferenced iterator provides a pointer rather than a
reference. NFC.
llvm-svn: 281730
virtual table offset in a member function pointer.
We are reserving this space for future ABI use relating to alternative
v-table configurations. In the meantime, continue to zero-initialize
this space when actually emitting a member pointer literal.
This will successfully interoperate with existing compilers.
Future versions of the compiler may place additional data in
this location, and at that point, code emitted by compilers
prior to this patch will fail if exposed to such a member pointer.
This is therefore a somewhat hard ABI break. However, because
it is limited to an uncommon case of an uncommon language feature,
and especially because interoperation with the standard library
does not depend on member pointers, we believe that with a
sufficiently advance compiler change the impact of this break
will be minimal in practice.
llvm-svn: 281693
field in the enclosing lambda or block.
This patch fixes a bug in code-gen where it uses the type of the
declared variable rather than the type of the capture of the enclosing
lambda or block for the block capture. For example, in the following
function, code-gen currently uses i32* for the block capture "a" because
"a" is passed to foo1 as a reference, but it should use i32 since the
enclosing lambda captures "a" by value.
void foo1(int &a) {
auto lambda = [a]{
auto block1 = ^{
i = a;
};
block1();
};
lambda();
}
rdar://problem/18586386
Differential Revision: https://reviews.llvm.org/D21104
llvm-svn: 281682
Summary: This patch converts finite/__finite to builtin functions so that it will be inlined by compiler.
Reviewers: hfinkel, davidxl, efriedma
Subscribers: efriedma, llvm-commits
Differential Revision: https://reviews.llvm.org/D24483
llvm-svn: 281509
Move the definition of `getTriple()` into the header. It would just call
`getTarget().getTriple()`. Inline the definition to allow the compiler to see
the same amount of the layout as previously. Remove the more verbose
`getTarget().getTriple()` in favour of `getTriple()`.
llvm-svn: 281487
r235815 changed CGRecordLowering::accumulateBases to ignore non-virtual
bases of size 0, which prevented adding those non-virtual bases to
CGRecordLayout's NonVirtualBases. This caused clang to assert when
CGRecordLayout::getNonVirtualBaseLLVMFieldNo was called in
EmitNullConstant. This commit fixes the bug by ignoring zero-sized
non-virtual bases in EmitNullConstant.
rdar://problem/28100139
Differential Revision: https://reviews.llvm.org/D24312
llvm-svn: 281405
In r246338, code was added to check for this, but it failed to take into
account implicit destructor invocations because those are not reflected
in the AST. This adds a separate check for them.
llvm-svn: 281395
We also need to add ObjCTypeParamTypeLoc. ObjCTypeParamType supports the
representation of "T <protocol>" where T is a type parameter. Before this,
we use TypedefType to represent the type parameter for ObjC.
ObjCTypeParamType has "ObjCTypeParamDecl *OTPDecl" and it extends from
ObjCProtocolQualifiers. It is a non-canonical type and is canonicalized
to the underlying type with the protocol qualifiers.
rdar://24619481
rdar://25060179
Differential Revision: http://reviews.llvm.org/D23079
llvm-svn: 281355
Original commit message:
Add -fdiagnostics-show-hotness
Summary:
I've recently added the ability for optimization remarks to include the
hotness of the corresponding code region. This uses PGO and allows
filtering of the optimization remarks by relevance. The idea was first
discussed here:
http://thread.gmane.org/gmane.comp.compilers.llvm.devel/98334
The general goal is to produce a YAML file with the remarks. Then, an
external tool could dynamically filter these by hotness and perhaps by
other things.
That said it makes sense to also expose this at the more basic level
where we just include the hotness info with each optimization remark.
For example, in D22694, the clang flag was pretty useful to measure the
overhead of the additional analyses required to include hotness.
(Without the flag we don't even run the analyses.)
For the record, Hal has already expressed support for the idea of this
patch on IRC.
Differential Revision: https://reviews.llvm.org/D23284
llvm-svn: 281293
We should be doing the same checks when a type is completed as we do
when a complete type is used during emission. Previously, we duplicated
the logic, and it got out of sync. This could be observed with
dllimported classes.
Also reduce a test case for this slightly.
Implementing review feedback from David Blaikie on r281057.
llvm-svn: 281278
Summary:
I've recently added the ability for optimization remarks to include the
hotness of the corresponding code region. This uses PGO and allows
filtering of the optimization remarks by relevance. The idea was first
discussed here:
http://thread.gmane.org/gmane.comp.compilers.llvm.devel/98334
The general goal is to produce a YAML file with the remarks. Then, an
external tool could dynamically filter these by hotness and perhaps by
other things.
That said it makes sense to also expose this at the more basic level
where we just include the hotness info with each optimization remark.
For example, in D22694, the clang flag was pretty useful to measure the
overhead of the additional analyses required to include hotness.
(Without the flag we don't even run the analyses.)
For the record, Hal has already expressed support for the idea of this
patch on IRC.
Differential Revision: https://reviews.llvm.org/D23284
llvm-svn: 281276
MSVC emits /include directives in the .drective section for the
__dyn_tls_init function (decorated as ___dyn_tls_init@12 for 32-bit).
This fixes PR30347.
llvm-svn: 281189
The logic for upgrading a class from a forward decl to a complete type
was not checking the debug info emission level before applying the
vtable optimization. This meant we ended up without debug info for a
class which was required to be complete. I noticed it because it
triggered an assertion during CodeView emission, but that's a separate
issue.
llvm-svn: 281057
If a dynamic class contains a dllimport method, then assume the class
may not be constructed in this DLL, and therefore the vtable will live
in a different PDB.
This heuristic is still incomplete, and will miss things like abstract
base classes that are only constructed on one side of the DLL interface.
That said, this heuristic does detect some cases that are currently
problematic, and may be useful to other projects that don't use many
DLLs.
llvm-svn: 281053
- Simplify signature of CreateVTableInitializer function.
- Move vtable component builder to a separate function.
- Remove unnecessary accessors from VTableLayout class.
This is in preparation for a future change that will alter the type of the
vtable initializer.
Differential Revision: https://reviews.llvm.org/D22642
llvm-svn: 280897
Move the logic for doing this from the ABI argument lowering into
EmitParmDecl, which runs for all parameters. Our codegen is slightly
suboptimal in this case, as we may leave behind a dead store after
optimization, but it's 32-bit inalloca, and this fixes the bug in a
robust way.
Fixes PR30293
llvm-svn: 280836
If the virtual method comes from a secondary vtable, then the type of
the 'this' parameter should be i8*, and not a pointer to the complete
class. In the MS ABI, the 'this' parameter on entry points to the vptr
containing the virtual method that was called, so we use i8* instead of
the normal type. We had a mismatch where the CGFunctionInfo of the call
didn't match the CGFunctionInfo of the declaration, and this resulted in
some assertions, but now both sides agree the type of 'this' is i8*.
Fixes one issue raised in PR30293
llvm-svn: 280815
Use llvm::DINode::DIFlags type (strongly typed enum) for debug flags instead of unsigned int to avoid problems on platforms with sizeof(int) < 4: we already have flags with values > (1 << 16).
Patch by: Victor Leschuk <vleschuk@gmail.com>
Differential Revision: https://reviews.llvm.org/D23767
llvm-svn: 280701
Summary:
Remove access qualifiers on images in arg info metadata:
* kernel_arg_type
* kernel_arg_base_type
Image access qualifiers are inseparable from type in clang implementation,
but OpenCL spec provides a special query to get access qualifier
via clGetKernelArgInfo with CL_KERNEL_ARG_ACCESS_QUALIFIER.
Besides that OpenCL conformance test_api get_kernel_arg_info expects
image types without access qualifier.
Patch by Evgeniy Tyurin.
Reviewers: bader, yaxunl, Anastasia
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D23915
llvm-svn: 280699
Since some profiling tools, such as gprof, ftrace, and uftrace, use
-pg option to generate a mcount function call at the entry of each
function. Function invocation can be detected by this hook function.
But mcount insertion is done before function inlining phase in clang,
sometime a function that already has a mcount call can be inlined in the
middle of another function.
This patch adds an attribute "counting-function" to each function
rather than emitting the mcount call directly in frontend so that this
attribute can be processed in backend. Then the mcount calls can be
properly inserted in backend after all the other optimizations are
completed.
Link: https://llvm.org/bugs/show_bug.cgi?id=28660
Reviewers: hans, rjmccall, hfinkel, rengolin, compnerd
Subscribers: shenhan, cfe-commits
Differential Revision: https://reviews.llvm.org/D22666
llvm-svn: 280355
-fprofile-dir=path allows the user to specify where .gcda files should be
emitted when the program is run. In particular, this is the first flag that
causes the .gcno and .o files to have different paths, LLVM is extended to
support this. -fprofile-dir= does not change the file name in the .gcno (and
thus where lcov looks for the source) but it does change the name in the .gcda
(and thus where the runtime library writes the .gcda file). It's different from
a GCOV_PREFIX because a user can observe that the GCOV_PREFIX_STRIP will strip
paths off of -fprofile-dir= but not off of a supplied GCOV_PREFIX.
To implement this we split -coverage-file into -coverage-data-file and
-coverage-notes-file to specify the two different names. The !llvm.gcov
metadata node grows from a 2-element form {string coverage-file, node dbg.cu}
to 3-elements, {string coverage-notes-file, string coverage-data-file, node
dbg.cu}. In the 3-element form, the file name is already "mangled" with
.gcno/.gcda suffixes, while the 2-element form left that to the middle end
pass.
llvm-svn: 280306
Classes with no virtual methods or whose virtual methods were all
inherited from virtual bases don't have a vfptr at offset zero. We were
crashing attempting to get the layout of that non-existent vftable.
We don't need any vshape info in this case because the debugger can
infer it from the base class information. The current class may not
introduce any virtual methods if we are in this situation.
llvm-svn: 280287
The shape is really just the number of methods in the vftable, since we
don't support 16 bit far calls. All calls are near. Encode this number
in the size of the artificial __vtbl_ptr_type DIDerivedType that we
generate. For DWARF, this will be a normal pointer, but for codeview
this will be a wide pointer that gets pattern matched into a
VFTableShape record. Insert this type into the element list of all
dynamic classes when emitting CodeView, so that the backend can emit the
shape even if the vptr lives in a primary base class.
Fixes PR28150
llvm-svn: 280255
In most cases these code regions are just redundant, but sometimes they
could be assigned to the counter of the parent code region instead of
the counter of the nested block.
Differential Revision: https://reviews.llvm.org/D23987
llvm-svn: 280199
to CC1, which are translated to function attributes and can e.g. be mapped on
build attributes FP_exceptions and FP_denormal. Setting these build attributes
allows better selection of floating point libraries.
Differential Revision: https://reviews.llvm.org/D23840
llvm-svn: 280064
The PPC64 DWARF register-size table did not match the ABI specification (or
GCC, for that matter). Fix that, and add a regression test.
Fixes PR27931.
llvm-svn: 280053
If there were several nested statements arranged in a way that all of them
end up with the same macro, then the expansion of this macro was assigned
with all the corresponding counters of these statements.
As a result, the wrong counter value was shown for the macro in llvm-cov.
This patch fixes the issue by preventing adding a counter for an expanded
source range if it already has an assigned counter, which is expected
to come from the most specific statement.
Differential Revision: https://reviews.llvm.org/D23160
llvm-svn: 279962
Otherwise we can't handle secondary base classes at offsets greater than
2**24. This agrees with libstdc++abi.
We could extend this change to other LLP64 platforms, but then we would
want to update libc++abi and it would require additional review.
Fixes PR29116
llvm-svn: 279786
This isn't exactly what MSVC does, unfortunately. MSVC does not pass
objects with destructors but no copy constructors by address. More ARM
expertise is required to really understand what should be done here.
Fixes PR29136.
llvm-svn: 279764
Saleem Abdulrasool