Dont emit Mapping symbols for sections that contain only data.
Summary:
Dont emit mapping symbols for sections that contain only data.
Reviewers: rengolin, weimingz, kparzysz, t.p.northover, peter.smith
Reviewed By: t.p.northover
Patched by Shankar Easwaran <shankare@codeaurora.org>
Subscribers: alekseyshl, t.p.northover, llvm-commits
Differential Revision: https://reviews.llvm.org/D30724
llvm-svn: 299392
This makes sure we get the same redefinition rules regardless of who
is printing (asm parser, codegen) and to what (asm, obj).
This fixes an unintentional regression in r293936.
llvm-svn: 294752
Currently, the error messages we emit for the .org directive when the
expression is not absolute or is out of range do not include the line
number of the directive, so it can be hard to track down the problem if
a file contains many .org directives.
This patch stores the source location in the MCOrgFragment, so that it
can be used for diagnostics emitted during layout.
Since layout is an iterative process, and the errors are detected during
each iteration, it would have been possible for errors to be reported
multiple times. To prevent this, I've made the assembler bail out after
each iteration if any errors have been reported. This will still allow
multiple unrelated errors to be reported in the common case where they
are all detected in the first round of layout.
Differential Revision: https://reviews.llvm.org/D27411
llvm-svn: 289643
Summary:
Previously we were trying to represent this with the "contains" list of
the .cv_inline_linetable directive, which was not enough information.
Now we directly represent the chain of inlined call sites, so we know
what location to emit when we encounter a .cv_loc directive of an inner
inlined call site while emitting the line table of an outer function or
inlined call site. Fixes PR29146.
Also fixes PR29147, where we would crash when .cv_loc directives crossed
sections. Now we write down the section of the first .cv_loc directive,
and emit an error if any other .cv_loc directive for that function is in
a different section.
Also fixes issues with discontiguous inlined source locations, like in
this example:
volatile int unlikely_cond = 0;
extern void __declspec(noreturn) abort();
__forceinline void f() {
if (!unlikely_cond) abort();
}
int main() {
unlikely_cond = 0;
f();
unlikely_cond = 0;
}
Previously our tables gave bad location information for the 'abort'
call, and the debugger wouldn't snow the inlined stack frame for 'f'.
It is important to emit good line tables for this code pattern, because
it comes up whenever an asan bug occurs in an inlined function. The
__asan_report* stubs are generally placed after the normal function
epilogue, leading to discontiguous regions of inlined code.
Reviewers: majnemer, amccarth
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24014
llvm-svn: 280822
MCContext already has many tasks, and separating CodeView out from it is
probably a good idea. The .cv_loc tracking was modelled on the DWARF
tracking which lived directly in MCContext.
Removes the inclusion of MCCodeView.h from MCContext.h, so now there are
only 10 build actions while I hack on CodeView support instead of 265.
llvm-svn: 279847
Assembler directives .dtprelword, .dtpreldword, .tprelword, and
.tpreldword generates relocations R_MIPS_TLS_DTPREL32, R_MIPS_TLS_DTPREL64,
R_MIPS_TLS_TPREL32, and R_MIPS_TLS_TPREL64 respectively.
The main motivation for this patch is to be able to write test cases
for checking correctness of the LLD linker's behaviour.
Differential Revision: https://reviews.llvm.org/D23669
llvm-svn: 279439
This matches the behavior of GNU assembler which supports symbolic
expressions in absolute expressions used in assembly directives.
Differential Revision: http://reviews.llvm.org/D20752
llvm-svn: 271102
This matches the behavior of GNU assembler which supports symbolic
expressions in absolute expressions used in assembly directives.
Differential Revision: http://reviews.llvm.org/D20656
llvm-svn: 271028
This matches the behavior of GNU assembler which supports symbolic
expressions in absolute expressions used in assembly directives.
Differential Revision: http://reviews.llvm.org/D20337
llvm-svn: 270786
CodeView, like most other debug formats, represents the live range of a
variable so that debuggers might print them out.
They use a variety of records to represent how a particular variable
might be available (in a register, in a frame pointer, etc.) along with
a set of ranges where this debug information is relevant.
However, the format only allows us to use ranges which are limited to a
maximum of 0xF000 in size. This means that we need to split our debug
information into chunks of 0xF000.
Because the layout of code is not known until *very* late, we must use a
new fragment to record the information we need until we can know
*exactly* what the range is.
llvm-svn: 259868
CodeView requires us to accurately describe the extent of the inlined
code. We did this by grabbing the next debug location in source order
and using *that* to denote where we stopped inlining. However, this is
not sufficient or correct in instances where there is no next debug
location or the next debug location belongs to the start of another
function.
To get this correct, use the end symbol of the function to denote the
last possible place the inlining could have stopped at.
llvm-svn: 259548
This directive emits the binary annotations that describe line and code
deltas in inlined call sites. Single-stepping through inlined frames in
windbg now works.
llvm-svn: 259535
This support is _very_ rudimentary, just enough to get some basic data
into the CodeView debug section.
Left to do is:
- Use the combined opcodes to save space.
- Do something about code offsets.
llvm-svn: 259230
This reverts commit r259117.
The LineInfo constructor is defined in the codeview library and we have
to link against it now. Doing that isn't trivial, so reverting for now.
llvm-svn: 259126
Adds a new family of .cv_* directives to LLVM's variant of GAS syntax:
- .cv_file: Similar to DWARF .file directives
- .cv_loc: Similar to the DWARF .loc directive, but starts with a
function id. CodeView line tables are emitted by function instead of
by compilation unit, so we needed an extra field to communicate this.
Rather than overloading the .loc direction further, we decided it was
better to have our own directive.
- .cv_stringtable: Emits the codeview string table at the current
position. Currently this just contains the filenames as
null-terminated strings.
- .cv_filechecksums: Emits the file checksum table for all files used
with .cv_file so far. There is currently no support for emitting
actual checksums, just filenames.
This moves the line table emission code down into the assembler. This
is in preparation for implementing the inlined call site line table
format. The inline line table format encoding algorithm requires knowing
the absolute code offsets, so it must run after the assembler has laid
out the code.
David Majnemer collaborated on this patch.
llvm-svn: 259117
The value size was always 1 or 0, so we don't need to store it.
In a no asserts build this takes the testcase of pr26208 from 11 to 10
seconds.
llvm-svn: 258141
Summary:
Support for R_MIPS_NONE allows us to parse MIPS16's usage of .reloc.
R_MIPS_32 was included to be able to better test the directive.
Targets can add their relocations by overriding MCAsmBackend::getFixupKind().
Subscribers: grosbach, rafael, majnemer, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13659
llvm-svn: 252888
This extends the work done in r233995 so that now getFragment (in addition to
getSection) also works for variable symbols.
With that the existing logic to decide if a-b can be computed works even if
a or b are variables. Given that, the expression evaluation can avoid expanding
variables as aggressively and that in turn lets the relocation code see the
original variable.
In order for this to work with the asm streamer, there is now a dummy fragment
per section. It is used to assign a section to a symbol when no other fragment
exists.
This patch is a joint work by Maxim Ostapenko andy myself.
llvm-svn: 249303
We can just ask the ObjectWriter for it's stream instead of caching
around our own reference to it. No functionality change is intended.
llvm-svn: 246604
After r244870 flush() will only compare two null pointers and return,
doing nothing but wasting run time. The call is not required any more
as the stream and its SmallString are always in sync.
Thanks to David Blaikie for reviewing.
llvm-svn: 244928
NFC patch for current users, but llvm-dsymutil will use the new
functionality to adapt to the input linetable.
Based on a patch by Adrian Prantl.
llvm-svn: 244318
Summary:
The current implementation doesn't always flush all pending labels
beforeemitting data which can result in an incorrectly placed labels in
case when when instruction bundling is enabled and -mc-relax-all flag is
being used. To address this issue, we always flush pending labels before
emitting data.
The change was tested by running PNaCl toolchain trybots with
-mc-relax-all flag set.
Fixes https://code.google.com/p/nativeclient/issues/detail?id=4063
Test Plan: Regression test attached
Reviewers: mseaborn
Subscribers: jfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D10325
llvm-svn: 240870
This makes emitAbsoluteSymbolDiff always succeed and moves logic from the asm
printer to it.
The object one now also works on ELF. If two symbols are in the same fragment,
we will never move them apart.
llvm-svn: 239552
There is no MCSectionData, so the old name is now meaningless.
Also remove some asserts/checks that were there just because the information
they used was in MCSectionData.
llvm-svn: 238708
Andrew V. Tischenko