The new behavior matches GNU objdump. A pair of angle brackets makes tests slightly easier.
`.foo:` is not unique and thus cannot be used in a `CHECK-LABEL:` directive.
Without `-LABEL`, the CHECK line can match the `Disassembly of section`
line and causes the next `CHECK-NEXT:` to fail.
```
Disassembly of section .foo:
0000000000001634 .foo:
```
Bdragon: <> has metalinguistic connotation. it just "feels right"
Reviewed By: rupprecht
Differential Revision: https://reviews.llvm.org/D75713
GNU ld creates the synthetic section .iplt, and has a built-in linker
script that assigns .iplt to the output section .plt . There is no
output section named .iplt .
Making .iplt an output section actually has a benefit that makes the
tricky toolchain feature stand out. Symbolizers don't have to deal with
mixed PLT entries (e.g. llvm-objdump -d incorrectly annotates such jump
targets).
On EM_PPC{,64}, .glink contains a PLT resolver and a series of jump
instructions. The 4-byte entry size makes it unnecessary to have an
alignment of 16.
Mark ppc32-gnu-ifunc.s and ppc32-gnu-ifunc-nonpreemptable.s as `XFAIL: *`.
They test IPLT on EM_PPC, which never works.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D71520
PltSection is used by both PLT and IPLT. The PLT section may have a
header while the IPLT section does not. Split off IpltSection from
PltSection to be clearer.
Unlike other targets, PPC64 cannot use the same code sequence for PLT
and IPLT. This helps make a future PPC64 patch (D71509) more isolated.
On EM_386 and EM_X86_64, when PLT is empty while IPLT is not, currently
we are inconsistent whether the PLT header is conceptually attached to
in.plt or in.iplt . Consistently attach the header to in.plt can make
the -z retpolineplt logic simpler. It also makes `jmp` point to an
aesthetically better place for non-retpolineplt cases.
Reviewed By: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D71519
This change only affects EM_386. relOff can be computed from `index`
easily, so it is unnecessarily passed as a parameter.
Both in.plt and in.iplt entries are written by writePLT. For in.iplt,
the instruction `push reloc_offset` will change because `index` is now
different. Fortunately, this does not matter because `push; jmp` is only
used by PLT. IPLT does not need the code sequence.
Reviewed By: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D71518
Ported the D64906 technique to EM_386.
If `sh_addralign(.tdata) < sh_addralign(.tbss)`,
we can potentially make `p_vaddr(PT_TLS)%p_align(PT_TLS) != 0`.
ld.so that are known to have problems if p_vaddr%p_align!=0:
* FreeBSD 13.0-CURRENT rtld-elf
* glibc https://sourceware.org/bugzilla/show_bug.cgi?id=24606
New test i386-tls-vaddr-align.s checks our workaround makes p_vaddr%p_align = 0.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D65865
llvm-svn: 369347
An R_*_IRELATIVE represents the address of a STT_GNU_IFUNC symbol
(redirected at runtime) which is non-preemptable and is not associated
with a canonical PLT (associated with a symbol with a section index of
SHN_UNDEF but a non-zero st_value).
.rel[a].plt [DT_JMPREL, DT_JMPREL+DT_JMPRELSZ) contains relocations that
can be lazily resolved. R_*_IRELATIVE are always eagerly resolved, so
conceptually they do not belong to .rela.plt. "iplt" is mostly a misnomer.
glibc powerpc and powerpc64 do not resolve R_*_IRELATIVE if they are in .rela.plt.
// a.o - synthesized PLT call stub has an R_*_IRELATIVE
void ifunc(); int main() { ifunc(); }
// b.o
static void real() {}
asm (".type ifunc, %gnu_indirect_function");
void *ifunc() { return ℜ }
The lld-linked executable crashes. ld.bfd places R_*_IRELATIVE in
.rela.dyn and the executable works.
glibc i386, x86_64, and aarch64 have logic
(glibc/sysdeps/*/dl-machine.h:elf_machine_lazy_rel) to eagerly resolve
R_*_IRELATIVE in .rel[a].plt so the lld-linked executable works.
Move R_*_IRELATIVE from .rel[a].plt to .rel[a].dyn to fix the crashes on
glibc powerpc/powerpc64. This also helps simplifying ifunc
implementation in FreeBSD rtld-elf powerpc64.
If --pack-dyn-relocs=android[+relr] is specified, the Android packed
dynamic relocation format is used for .rela.dyn. We cannot name
in.relaIplt ".rela.dyn" because the output section will have mixed
formats. This can be improved in the future.
Reviewed By: pcc
Differential Revision: https://reviews.llvm.org/D65651
llvm-svn: 367745
This improves readability and the behavior is consistent with GNU objdump.
The new test test/tools/llvm-objdump/X86/disassemble-section-name.s
checks we print newlines before and after "Disassembly of section ...:"
Differential Revision: https://reviews.llvm.org/D61127
llvm-svn: 359668
Also change some options that have different semantics (cause confusion) in llvm-readelf mode:
-s => -S
-t => --symbols
-sd => --section-data
llvm-svn: 359651
Non-GOT non-PLT relocations to non-preemptible ifuncs result in the
creation of a canonical PLT, which now takes the identity of the IFUNC
in the symbol table. This (a) ensures address consistency inside and
outside the module, and (b) fixes a bug where some of these relocations
end up pointing to the resolver.
Fixes (at least) PR40474 and PR40501.
Differential Revision: https://reviews.llvm.org/D57371
llvm-svn: 353981
Summary:
D52830 sets sh_link to .symtab in static link, which breaks executable stripped by GNU strip.
It may also be odd that .rela.plt (SHF_ALLOC) points to .symtab (non-SHF_ALLOC).
Change the logic on pcc's suggestion.
Before:
% clang -fuse-ld=lld -static -xc =(printf 'int main(){}') # or gcc
% strip a.out; ./a.out
unexpected reloc type in static binary[1] 61634 segmentation fault ./a.out
Reviewers: ruiu, grimar, emaste, espindola
Reviewed By: ruiu
Subscribers: pcc, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D53993
llvm-svn: 345899
This is https://bugs.llvm.org/show_bug.cgi?id=37538,
Currently, LLD may set both sh_link and sh_info for
.rela.plt section to zero when we have only .rela.iplt section part used.
ELF spec (https://docs.oracle.com/cd/E19683-01/816-1386/chapter6-94076/index.html)
says that for SHT_REL and SHT_RELA, sh_link references the associated symbol table
and sh_info the "section to which the relocation applies."
When we set the sh_link field, for the regular case we use the .dynsym index.
For .rela.iplt sections, it is unclear what is the associated symbol table,
because R_*_RELATIVE relocations do not use symbol names and we might have no
.dynsym section at all so this patch uses .symtab section index.
Differential revision: https://reviews.llvm.org/D52830
llvm-svn: 344226
Summary:
As for x86_64, the default image base for AArch64 and i386 should be
aligned to a superpage appropriate for the architecture.
On AArch64, this is 2 MiB, on i386 it is 4 MiB.
Reviewers: emaste, grimar, javed.absar, espindola, ruiu, peter.smith, srhines, rprichard
Reviewed By: ruiu, peter.smith
Subscribers: jfb, markj, arichardson, krytarowski, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D50297
llvm-svn: 342746
It doesn't make sense to link from an alloc section to a non alloc
one as we were doing.
This matches the behavior of both gold and bfd.
llvm-svn: 315584
This change introduces new synthetic sections IpltSection, IgotPltSection
that represent the ifunc entries that would previously have been put in
the PltSection and the GotPltSection. The separation makes sure that
the R_*_IRELATIVE relocations are placed after the non R_*_IRELATIVE
relocations, which permits ifunc resolvers to know that the .got.plt
slots will be initialized prior to the resolver being called.
A secondary benefit is that for ARM we can move the IgotPltSection and its
dynamic relocations to the .got and .rel.dyn as the ARM glibc expects all
the R_*_IRELATIVE relocations to be in the .rel.dyn
Differential revision: https://reviews.llvm.org/D27406
llvm-svn: 289045
Summary:
This patch adds a ".comment" section to an output. The comment
section contains the linker's version string. You can now
find out whether a binary is created by LLD or not using objdump
command like this.
$ objdump -s -j .comment foo
foo: file format elf64-x86-64
Contents of section .comment:
0000 00474343 3a202855 62756e74 7520342e .GCC: (Ubuntu 4.
0010 382e342d 32756275 6e747531 7e31342e 8.4-2ubuntu1~14.
...
00c0 766d2f74 72756e6b 20323835 38343629 vm/trunk 285846)
00d0 004c696e 6b65723a 204c4c44 20342e30 .Linker: LLD 4.0
00e0 2e302028 7472756e 6b203238 36343036 .0 (trunk 286406
00f0 2900 ).
Compilers emits .comment section as well, so the output contains
both compiler and linker information.
Alternative considered:
I first tried to add a SHT_NOTE section because GNU gold does that.
A NOTE section starts with a header which contains content type.
It turned out that ld.gold sets type NT_GNU_GOLD_VERSION to their
NOTE section. So the NOTE type is only for GNU gold (surprise!)
Next, I tried to create ".linker-version" section. However, it seems
that reusing the existing ".comment" section is better because 1)
other tools already know about .comment section and is able to strip
it and 2) the result contans not only linker info but also compiler
info.
Differential Revision: https://reviews.llvm.org/D26487
llvm-svn: 286496
Our symbol representation was redundant, and some times would get out of
sync. It had an Elf_Sym, but some fields were copied to SymbolBody.
Different parts of the code were checking the bits in SymbolBody and
others were checking Elf_Sym.
There are two general approaches to fix this:
* Copy the required information and don't store and Elf_Sym.
* Don't copy the information and always use the Elf_Smy.
The second way sounds tempting, but has a big problem: we would have to
template SymbolBody. I started doing it, but it requires templeting
*everything* and creates a bit chicken and egg problem at the driver
where we have to find ELFT before we can create an ArchiveFile for
example.
As much as possible I compared the test differences with what gold and
bfd produce to make sure they are still valid. In most cases we are just
adding hidden visibility to a local symbol, which is harmless.
In most tests this is a small speedup. The only slowdown was scylla
(1.006X). The largest speedup was clang with no --build-id, -O3 or
--gc-sections (i.e.: focus on the relocations): 1.019X.
llvm-svn: 265293
This relocation is similar to R_*_RELATIVE except that the value used in this relocation is the program address returned by the function, which takes no arguments, at the address of
the result of the corresponding R_*_RELATIVE relocation as specified in the processor-specific ABI. The purpose of this relocation to avoid name lookup for locally defined STT_GNU_IFUNC symbols at load-time.
More info can be found in ifunc.txt from https://sites.google.com/site/x32abi/documents.
Differential revision: http://reviews.llvm.org/D15235
llvm-svn: 256144
Fangrui Song