Commit Graph

412 Commits

Author SHA1 Message Date
Peter Collingbourne 5c902845e5 Revert r327248, "For most Targets the _GLOBAL_OFFSET_TABLE_ symbol is expected to be at"
This change broke ARM code that expects to be able to add
_GLOBAL_OFFSET_TABLE_ to the result of an R_ARM_REL32.

I will provide a reproducer on llvm-commits.

llvm-svn: 327688
2018-03-16 01:01:44 +00:00
Rui Ueyama 4e6b822cdc Separate sentences to clarify a comment.
llvm-svn: 327555
2018-03-14 19:01:00 +00:00
George Rimar 2ab9362bf5 [ELF] - Never create .gnu_hash with NBuckets == 0.
Currently, we can end up with NBuckets==0 and android loader
does not like it (PR36537).

Seems we can go with a minimal amount of changes here for simplicity
and be consistent with gold and so just always use >= 1 value for NBuckets.

Differential revision: https://reviews.llvm.org/D44422

llvm-svn: 327481
2018-03-14 08:52:39 +00:00
Peter Smith 18aa0be36e For most Targets the _GLOBAL_OFFSET_TABLE_ symbol is expected to be at
the start of the .got.plt section so that _GLOBAL_OFFSET_TABLE_[0] =
reserved value that is by convention the address of the dynamic section.
Previously we had defined _GLOBAL_OFFSET_TABLE_ as either the start or end
of the .got section with the intention that the .got.plt section would
follow the .got. However this does not always hold with the current
default section ordering so _GLOBAL_OFFSET_TABLE_[0] may not be consistent
with the reserved first entry of the .got.plt.

X86, X86_64, Arm and AArch64 will use the .got.plt. Mips and Power use .got

Fixes PR36555

Differential Revision: https://reviews.llvm.org/D44259

llvm-svn: 327248
2018-03-11 20:58:18 +00:00
Fangrui Song 0c483024e4 [ELF] Convert {read,write}*be to endianness-aware read/write.
Subscribers: emaste, nemanjai, arichardson, kbarton, llvm-commits

Differential Revision: https://reviews.llvm.org/D44227

llvm-svn: 327156
2018-03-09 18:03:22 +00:00
Rui Ueyama 7c18abf99a Set DF_TEXTREL to executables that need text relocations.
Summary:
If an executable needs text relocations, it should be marked as such so
that the loader can prepare for text relocations. We currently create a
dummy segment with DT_TEXTREL for that purpose.

Generic ABI as of 2000 [1] mentioned that "Its [DT_TEXTREL's] use
has been superseded by the DF_TEXTREL flag". However, it's actually not
superseded even after 18 years. OpenBSD and musl recognize only DT_TEXTREL.
So we still need to set both.

[1] http://www.sco.com/developers/gabi/2000-07-17/ch5.dynamic.html

Reviewers: rafael

Subscribers: emaste, llvm-commits, arichardson

Differential Revision: https://reviews.llvm.org/D43920

llvm-svn: 326503
2018-03-01 22:56:52 +00:00
Rui Ueyama ee17371897 Merge {COFF,ELF}/Strings.cpp to Common/Strings.cpp.
This should resolve the issue that lld build fails in some hosts
that uses case-insensitive file system.

Differential Revision: https://reviews.llvm.org/D43788

llvm-svn: 326339
2018-02-28 17:38:19 +00:00
George Rimar 563e4f2f58 [ELF] - Introduce getInputSections() helper.
We sometimes need to iterate over input sections for a given
output section. It is not very convinent because we have to iterate
over section descriptions.
Patch introduces getInputSections helper, it simplifies things.

Differential revision: https://reviews.llvm.org/D43574

llvm-svn: 325763
2018-02-22 09:55:28 +00:00
Alexander Richardson 048e2508ad Rename DynamicReloc::getAddend() to computeAddend(). NFC
Summary:
Before the name of the function sounded like it was just a getter for the
private class member Addend. However, it actually calculates the final
value for the r_addend field in Elf_Rela that is used when writing the
.rela.dyn section. I also added a comment to the UseSymVA member to
explain how it interacts with computeAddend().

Differential Revision: https://reviews.llvm.org/D43161

llvm-svn: 325485
2018-02-19 11:00:15 +00:00
Rafael Espindola b960325989 Simplify RelocationBaseSection::addReloc.
Now that we have R_ADDEND, UseSymVA was redundant. We only want to
write the symbol virtual address when using an expression other than
R_ADDEND.

llvm-svn: 325360
2018-02-16 16:53:04 +00:00
Alexander Richardson cfb6093379 Ensure that Elf_Rel addends are always written for dynamic relocations
Summary:
This follows up on r321889 where writing of Elf_Rel addends was partially
moved to RelocationBaseSection. This patch ensures that the addends are
always written to the output section when a input section uses RELA but the
output is REL.

Differential Revision: https://reviews.llvm.org/D42843

llvm-svn: 325328
2018-02-16 10:01:17 +00:00
Rafael Espindola d49866edba Use RelType in a few more places. NFC.
llvm-svn: 325017
2018-02-13 16:06:11 +00:00
Rafael Espindola 35cf8bbe36 Add a simpler version of addReloc. NFC.
Extracted from a patch by Alexander Richardson!

llvm-svn: 325016
2018-02-13 16:03:52 +00:00
Rui Ueyama ac114d27ae s/uncompress/decompress/g.
In lld, we use both "uncompress" and "decompress" which is confusing.
Since LLVM uses "decompress", we should use the same term.

llvm-svn: 324944
2018-02-12 21:56:14 +00:00
Rafael Espindola 7a7a81d9d1 Replace ApplyDynamicRelocs with WriteAddends.
The difference is that WriteAddends also takes IsRela into
consideration.

llvm-svn: 324271
2018-02-05 20:55:46 +00:00
Peter Smith 64f65b02d2 [ELF] Implement --[no-]apply-dynamic-relocs option.
When resolving dynamic RELA relocations the addend is taken from the
relocation and not the place being relocated. Accordingly lld does not
write the addend field to the place like it would for a REL relocation.
Unfortunately there is some system software, in particlar dynamic loaders
such as Bionic's linker64 that use the value of the place prior to
relocation to find the offset that they have been loaded at. Both gold
and bfd control this behavior with the --[no-]apply-dynamic-relocs option.
This change implements the option and defaults it to true for compatibility
with gold and bfd.

Differential Revision: https://reviews.llvm.org/D42797

llvm-svn: 324221
2018-02-05 10:15:08 +00:00
Rafael Espindola 7ce2b4cd13 Simplify by sorting relocations before writing them.
llvm-svn: 323944
2018-02-01 03:17:12 +00:00
Rafael Espindola 6b2b45020c Use 4 as the alignment of .eh_frame_hdr.
It includes 32 bit values and this matches both gold and bfd.

llvm-svn: 323172
2018-01-23 05:23:23 +00:00
Rui Ueyama 2f8af79927 Avoid divisions.
Compiler doesn't know the fact that Config->WordSize * 8 is always a
power of two, so it had to use the div instruction to divide some
number with C.

llvm-svn: 323014
2018-01-20 00:14:16 +00:00
Rui Ueyama 517366c7e0 Make the bloom filter a bit larger.
I created https://reviews.llvm.org/D42202 to see how large the bloom
filter should be. With that patch, I tested various bloom filter sizes
with the following commands:

  $ cmake -GNinja -DCMAKE_BUILD_TYPE=Debug -DLLVM_ENABLE_LLD=true \
    -DLLVM_ENABLE_PROJECTS='clang;lld' -DBUILD_SHARED_LIBS=ON \
    -DCMAKE_SHARED_LINKER_FLAGS=-Wl,-bloom-filter-bits=<some integer> \
    ../llvm-project/llvm
  $ rm -f $(find . -name \*.so.7.0.0svn)
  $ ninja lld
  $ LD_BIND_NOW=1 perf stat bin/ld.lld

Here is the result:

  -bloom-filter-bits=8   0.220351609 seconds
  -bloom-filter-bits=10  0.217146597 seconds
  -bloom-filter-bits=12  0.206870826 seconds
  -bloom-filter-bits=16  0.209456312 seconds
  -bloom-filter-bits=32  0.195092075 seconds

Currently we allocate 8 bits for a symbol, but according to the above
result, that number is not optimal. Even though the numbers follow the
diminishing return rule, the point where a marginal improvement becomes
too small is not -bloom-filter-bits=8 but 12. So this patch sets it to 12.

Differential Revision: https://reviews.llvm.org/D42204

llvm-svn: 323010
2018-01-19 23:54:31 +00:00
Rui Ueyama e2dfdbf0aa Do not pass an argument that can be easily inferred from other argument.
llvm-svn: 322416
2018-01-12 22:29:29 +00:00
George Rimar 9fc2c64b35 [ELF] - Do not use HeaderSize for conditions in PltSection.
Previously we checked (HeaderSize == 0) to find out if
PltSection section is IPLT or PLT. Some targets does not set
HeaderSize though. For example PPC64 has no lazy binding implemented
and does not set PltHeaderSize constant.

Because of that using of both IPLT and PLT relocations worked
incorrectly there (testcase is provided).

Patch fixes the issue.

Differential revision: https://reviews.llvm.org/D41613

llvm-svn: 322362
2018-01-12 09:35:57 +00:00
Dimitry Andric 656714a311 Fix thread race between SectionPiece's OutputOff and Live members
Summary:
As reported in bug 35788, rL316280 reintroduces a race between two
members of SectionPiece, which share the same 64 bit memory location.

To fix the race, check the hash before checking the Live member, as
suggested by Rafael.

Reviewers: ruiu, rafael

Reviewed By: ruiu

Subscribers: smeenai, emaste, llvm-commits

Differential Revision: https://reviews.llvm.org/D41884

llvm-svn: 322264
2018-01-11 08:03:22 +00:00
Shoaib Meenai d79bbf4474 [ELF] Fix SysV hash tables with --no-rosegment
When setting up the chain, we copy over the bucket's previous symbol
index, assuming that this index will be 0 (STN_UNDEF) for an unused
bucket (marking the end of the chain). When linking with --no-rosegment,
however, unused buckets will in fact contain the padding value, and so
the hash table will end up containing invalid chains. Zero out the hash
table section explicitly to avoid this, similar to what's already done
for GNU hash sections.

Differential Revision: https://reviews.llvm.org/D41928

llvm-svn: 322259
2018-01-11 06:57:01 +00:00
Rafael Espindola 73584cb587 Centralize Config->IsRela handling.
This merges the two places were we check Config->IsRela to decide how
to write a relocation addend.

llvm-svn: 321889
2018-01-05 20:08:38 +00:00
George Rimar edb61167e5 [ELF] - Add missing dynamic tags when producing output with IRelative relocations only.
This is "Bug 35751 - .dynamic relocation entries omitted if output
contains only IFUNC relocations"

We have InX::RelaPlt and InX::RelaIPlt synthetic sections for PLT relocations.
They are usually live in rela.plt section. Problem appears when InX::RelaPlt
section is empty. In that case we did not produce normal set of dynamic tags
required, because logic was written in the way assuming we always have
non-IRelative relocations in rela.plt.

Patch fixes the issue.

Differential revision: https://reviews.llvm.org/D41592

llvm-svn: 321600
2017-12-31 07:42:54 +00:00
George Rimar 3208588e7a [ELF] - Remove excessive checks. NFC.
This was raised in comments for D41592.
With current code we always assign parent
section for Rel[a] sections like
InX::RelaPlt or InX::RelaDyn, so checking
their parent for null is excessive.

llvm-svn: 321581
2017-12-30 08:40:45 +00:00
Rafael Espindola ce3b52c186 Pass an InputFile to the InputSection constructor.
This simplifies toRegularSection and reduces the noise in a followup
patch.

llvm-svn: 321240
2017-12-21 02:11:51 +00:00
Rafael Espindola 5c73c49c9f Detemplate createCommentSection.
It was only templated so it could create a dummy section header that
was immediately parsed back.

llvm-svn: 321235
2017-12-21 01:21:59 +00:00
Rafael Espindola a32ddc4639 Use a reference for the shared symbol file.
Every shared symbol has a file, so we can use a reference.

llvm-svn: 321187
2017-12-20 16:28:19 +00:00
Igor Kudrin 5966d15943 [ELF] Fix an assignment command at the end of an .ARM.exidx section.
The value of the symbol in the assignment should include the sentinel entry.

Differential Revision: https://reviews.llvm.org/D41234

llvm-svn: 321154
2017-12-20 08:56:10 +00:00
Rafael Espindola 1037eef8e0 Use references instead of pointers. NFC.
These values are trivially never null. While at it, also use
InputSection instead of InputSectionBase when possible.

llvm-svn: 321126
2017-12-19 23:59:35 +00:00
Rui Ueyama 22e5551ed7 Do not add .dynamic entries that don't have to be added early in the ctor. NFC.
We add dynamic section entries both in the ctor of the class and
DynamicSection::finalizeContents(). Some entries need to be added early
in the ctor because they add strings to .dynstr. Other entries were
intended to be added in finalizeContents(). However, some entries are
added in the ctor even though they don't add strings. This patch
fix the issue.

llvm-svn: 320851
2017-12-15 19:39:59 +00:00
Igor Kudrin a569163b00 Fix a build bot failure.
llvm-svn: 320671
2017-12-14 07:28:11 +00:00
Igor Kudrin f01caab4b7 [ELF] Prevent crash in writing an .ARM.exidx sentinel entry.
We might crash in 'ARMExidxSentinelSection::writeTo()' because it expected
the sentinel entry to be put in the same 'InputSectionDescription' as
the last real entry. This assumption fails if the last output section command
for .ARM.exidx is anything but an input section description, because in this
case 'OutputSection::addSection()' creates a new 'InputSectionDescription'.

Differential Revision: https://reviews.llvm.org/D41105

llvm-svn: 320668
2017-12-14 06:23:50 +00:00
Rafael Espindola 13dbf944d8 Simplify. NFC.
If a section has been replaced (Sec != Sec->Repl) it is not Live.

llvm-svn: 320597
2017-12-13 17:36:53 +00:00
Rafael Espindola 8f619ab826 Compact symbols from 96 to 88 bytes.
By using an index instead of a pointer for verdef we can put the index
next to the alignment field. This uses the otherwise wasted area and
reduces the shared symbol size.

By itself the performance change of this is in the noise, but I have a
followup patch to remove another 8 bytes that improves performance
when combined with this.

llvm-svn: 320449
2017-12-12 01:45:49 +00:00
Rafael Espindola 87e0deaea7 Move RelaPlt and RelaIplt to InX. NFC.
llvm-svn: 320327
2017-12-10 20:07:03 +00:00
Rafael Espindola 58946cdb08 Move RelaDyn to InX. NFC.
llvm-svn: 320324
2017-12-10 19:44:42 +00:00
Rafael Espindola 6d907105c5 Remove this->. NFC.
llvm-svn: 320323
2017-12-10 19:28:32 +00:00
Rafael Espindola d26b52fd34 Remove some includes from InputFiles.h.
They were not used in InputFiles.h and it was getting too easy to add
circular includes.

llvm-svn: 320256
2017-12-09 16:56:18 +00:00
Rui Ueyama 04c821c7e3 Use lambda to simplify code.
Differential Revision: https://reviews.llvm.org/D40994

llvm-svn: 320130
2017-12-08 02:20:50 +00:00
Rafael Espindola d182aaa69d Further simplify .gnu.hash writing. NFC.
llvm-svn: 320072
2017-12-07 18:59:29 +00:00
Rafael Espindola f9f2abe7bd Simplify .gnu.hash writing. NFC.
llvm-svn: 320070
2017-12-07 18:51:19 +00:00
Rafael Espindola 50ca10bb58 Avoid using a temporary std::vector.
With this memory usage when linking clang goes from 174.62MB to
172.77MB.

llvm-svn: 320069
2017-12-07 18:46:03 +00:00
Rui Ueyama c4e50bfc55 Fix broken .gnu.hash section if -no-rosegment is given.
We fill executable sections with trap instructions (0xcc or equivalent).
If a .gnu.hash section was put into an executable segment, we created
corrupted .gnu.hash section. This patch fixes the issue.

llvm-svn: 319863
2017-12-06 00:49:48 +00:00
Rui Ueyama 2278826c60 Cache modulo values for the .gnu.hash section.
This change actually makes the linker slightly faster. My observation
is that, with this patch, link time of clang without debug is about 1%
faster.

Differential Revision: https://reviews.llvm.org/D40697

llvm-svn: 319600
2017-12-02 00:37:13 +00:00
George Rimar 78e27e830d [ELF] - Produce relocation section name consistent with output section name when --emit-reloc used with linker script.
This is for "Bug 35474 - --emit-relocs produces wrongly-named reloc sections".

LLD currently for scripts like:

.text.boot : { *(.text.boot) }
emits relocation section with name .rela.text because does not take
redefined name of output section into account and builds section name
using rules for non-scripted case. Patch fixes this oddness.

Differential revision: https://reviews.llvm.org/D40652

llvm-svn: 319526
2017-12-01 09:04:52 +00:00
Rui Ueyama 1cf7f9cc80 Make .gnu.hash section smaller.
Our on-disk hash table was unnecessarily large. The cost of collision is
not high in the .gnu.hash table because each symbol in the .gnu.hash
table has a hash value with it. So, for each collided symbol, the
dynamic linker just compares an integer, which is pretty cheap.

This patch increases the load factor by about 8. Here's a comparison.

  $ readelf --histogram libclangSema.so.6.0.0svn-new-lld
  Histogram for `.gnu.hash' bucket list length (total of 582 buckets):
   Length  Number     % of total  Coverage
        0  11         (  1.9%)
        1  35         (  6.0%)      1.5%
        2  93         ( 16.0%)      9.5%
        3  108        ( 18.6%)     23.4%
        4  121        ( 20.8%)     44.1%
        5  86         ( 14.8%)     62.6%
        6  63         ( 10.8%)     78.8%
        7  38         (  6.5%)     90.2%
        8  18         (  3.1%)     96.4%
        9  6          (  1.0%)     98.7%
       10  3          (  0.5%)    100.0%

  $ readelf --histogram libclangSema.so.6.0.0svn-old-lld
  Histogram for `.gnu.hash' bucket list length (total of 4093 buckets):
   Length  Number     % of total  Coverage
        0  1498       ( 36.6%)
        1  1545       ( 37.7%)     37.7%
        2  712        ( 17.4%)     72.5%
        3  251        (  6.1%)     90.9%
        4  66         (  1.6%)     97.3%
        5  16         (  0.4%)     99.3%
        6  5          (  0.1%)    100.0%

  $ readelf --histogram libclangSema.so.6.0.0svn-bfd
  Histogram for `.gnu.hash' bucket list length (total of 1004 buckets):
   Length  Number     % of total  Coverage
      0  92         (  9.2%)
        1  227        ( 22.6%)      9.8%
        2  266        ( 26.5%)     32.6%
        3  222        ( 22.1%)     61.2%
        4  115        ( 11.5%)     81.0%
        5  55         (  5.5%)     92.8%
        6  21         (  2.1%)     98.2%
        7  6          (  0.6%)    100.0%

  $ readelf --histogram libclangSema.so.6.0.0svn-gold
  Histogram for `.gnu.hash' bucket list length (total of 2053 buckets):
   Length  Number     % of total  Coverage
        0  671        ( 32.7%)
        1  709        ( 34.5%)     30.4%
        2  470        ( 22.9%)     70.7%
        3  141        (  6.9%)     88.9%
        4  54         (  2.6%)     98.2%
        5  5          (  0.2%)     99.2%
        6  3          (  0.1%)    100.0%

Differential Revision: https://reviews.llvm.org/D40683

llvm-svn: 319503
2017-11-30 23:59:40 +00:00
Rafael Espindola dfebd3601d Use Symbol::File directly.
We are already paying the cost of storing a InputFile in every
Symbol, so use it uniformly.

llvm-svn: 319378
2017-11-29 22:47:35 +00:00