-only-needed -- link in only symbols needed by destination module
-internalize -- internalize linked symbols
Differential Revision: http://reviews.llvm.org/D12459
llvm-svn: 246561
As a follow-up to r246098, require `DISubprogram` definitions
(`isDefinition: true`) to be 'distinct'. Specifically, add an assembler
check, a verifier check, and bitcode upgrading logic to combat testcase
bitrot after the `DIBuilder` change.
While working on the testcases, I realized that
test/Linker/subprogram-linkonce-weak-odr.ll isn't relevant anymore. Its
purpose was to check for a corner case in PR22792 where two subprogram
definitions match exactly and share the same metadata node. The new
verifier check, requiring that subprogram definitions are 'distinct',
precludes that possibility.
I updated almost all the IR with the following script:
git grep -l -E -e '= !DISubprogram\(.* isDefinition: true' |
grep -v test/Bitcode |
xargs sed -i '' -e 's/= \(!DISubprogram(.*, isDefinition: true\)/= distinct \1/'
Likely some variant of would work for out-of-tree testcases.
llvm-svn: 246327
Mangled "linkage" names can be huge, and if the debugger (or other
tools) have no use for them, the size savings can be very impressive
(on the order of 40%).
Add one test for controlling behavior, and modify a number of tests to
either stop using linkage names, or make llc emit them (so these tests
will still run when the default triple is for PS4).
Differential Revision: http://reviews.llvm.org/D11374
llvm-svn: 244678
r243883 started moving 'distinct' nodes instead of duplicated them in
lib/Linker. This had the side-effect of sometimes not cloning uniqued
nodes that reference them. I missed a corner case:
!named = !{!0}
!0 = !{!1}
!1 = distinct !{!0}
!0 is the entry point for "remapping", and a temporary clone (say,
!0-temp) is created and mapped in case we need to model a uniquing
cycle.
Recursive descent into !1. !1 is distinct, so we leave it alone,
but update its operand to !0-temp.
Pop back out to !0. Its only operand, !1, hasn't changed, so we don't
need to use !0-temp. !0-temp goes out of scope, and we're finished
remapping, but we're left with:
!named = !{!0}
!0 = !{!1}
!1 = distinct !{null} ; uh oh...
Previously, if !0 and !0-temp ended up with identical operands, then
!0-temp couldn't have been referenced at all. Now that distinct nodes
don't get duplicated, that assumption is invalid. We need to
!0-temp->replaceAllUsesWith(!0) before freeing !0-temp.
I found this while running an internal `-flto -g` bootstrap. Strangely,
there was no case of this in the open source bootstrap I'd done before
commit...
llvm-svn: 243961
Since r241097, `DIBuilder` has only created distinct `DICompileUnit`s.
The backend is liable to start relying on that (if it hasn't already),
so make uniquable `DICompileUnit`s illegal and automatically upgrade old
bitcode. This is a nice cleanup, since we can remove an unnecessary
`DenseSet` (and the associated uniquing info) from `LLVMContextImpl`.
Almost all the testcases were updated with this script:
git grep -e '= !DICompileUnit' -l -- test |
grep -v test/Bitcode |
xargs sed -i '' -e 's,= !DICompileUnit,= distinct !DICompileUnit,'
I imagine something similar should work for out-of-tree testcases.
llvm-svn: 243885
Remove the fake `DW_TAG_auto_variable` and `DW_TAG_arg_variable` tags,
using `DW_TAG_variable` in their place Stop exposing the `tag:` field at
all in the assembly format for `DILocalVariable`.
Most of the testcase updates were generated by the following sed script:
find test/ -name "*.ll" -o -name "*.mir" |
xargs grep -l 'DILocalVariable' |
xargs sed -i '' \
-e 's/tag: DW_TAG_arg_variable, //' \
-e 's/tag: DW_TAG_auto_variable, //'
There were only a handful of tests in `test/Assembly` that I needed to
update by hand.
(Note: a follow-up could change `DILocalVariable::DILocalVariable()` to
set the tag to `DW_TAG_formal_parameter` instead of `DW_TAG_variable`
(as appropriate), instead of having that logic magically in the backend
in `DbgVariable`. I've added a FIXME to that effect.)
llvm-svn: 243774
Finish off PR23080 by renaming the debug info IR constructs from `MD*`
to `DI*`. The last of the `DIDescriptor` classes were deleted in
r235356, and the last of the related typedefs removed in r235413, so
this has all baked for about a week.
Note: If you have out-of-tree code (like a frontend), I recommend that
you get everything compiling and tests passing with the *previous*
commit before updating to this one. It'll be easier to keep track of
what code is using the `DIDescriptor` hierarchy and what you've already
updated, and I think you're extremely unlikely to insert bugs. YMMV of
course.
Back to *this* commit: I did this using the rename-md-di-nodes.sh
upgrade script I've attached to PR23080 (both code and testcases) and
filtered through clang-format-diff.py. I edited the tests for
test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns
were off-by-three. It should work on your out-of-tree testcases (and
code, if you've followed the advice in the previous paragraph).
Some of the tests are in badly named files now (e.g.,
test/Assembler/invalid-mdcompositetype-missing-tag.ll should be
'dicompositetype'); I'll come back and move the files in a follow-up
commit.
llvm-svn: 236120
Check that `@main` is calling `@foo2` (the renamed internal function),
not the `@foo` with external linkage that's been pulled in from the
override file.
llvm-svn: 235730
Add a flag to lib/Linker (and `llvm-link`) to override linkage rules.
When set, the functions in the source module *always* replace those in
the destination module.
The `llvm-link` option is `-override=abc.ll`. All the "regular" modules
are loaded and linked first, followed by the `-override` modules. This
is useful for debugging workflows where some subset of the module (e.g.,
a single function) is extracted into a separate file where it's
optimized differently, before being merged back in.
Patch by Luqman Aden!
llvm-svn: 235473
See r230786 and r230794 for similar changes to gep and load
respectively.
Call is a bit different because it often doesn't have a single explicit
type - usually the type is deduced from the arguments, and just the
return type is explicit. In those cases there's no need to change the
IR.
When that's not the case, the IR usually contains the pointer type of
the first operand - but since typed pointers are going away, that
representation is insufficient so I'm just stripping the "pointerness"
of the explicit type away.
This does make the IR a bit weird - it /sort of/ reads like the type of
the first operand: "call void () %x(" but %x is actually of type "void
()*" and will eventually be just of type "ptr". But this seems not too
bad and I don't think it would benefit from repeating the type
("void (), void () * %x(" and then eventually "void (), ptr %x(") as has
been done with gep and load.
This also has a side benefit: since the explicit type is no longer a
pointer, there's no ambiguity between an explicit type and a function
that returns a function pointer. Previously this case needed an explicit
type (eg: a function returning a void() function was written as
"call void () () * @x(" rather than "call void () * @x(" because of the
ambiguity between a function returning a pointer to a void() function
and a function returning void).
No ambiguity means even function pointer return types can just be
written alone, without writing the whole function's type.
This leaves /only/ the varargs case where the explicit type is required.
Given the special type syntax in call instructions, the regex-fu used
for migration was a bit more involved in its own unique way (as every
one of these is) so here it is. Use it in conjunction with the apply.sh
script and associated find/xargs commands I've provided in rr230786 to
migrate your out of tree tests. Do let me know if any of this doesn't
cover your cases & we can iterate on a more general script/regexes to
help others with out of tree tests.
About 9 test cases couldn't be automatically migrated - half of those
were functions returning function pointers, where I just had to manually
delete the function argument types now that we didn't need an explicit
function type there. The other half were typedefs of function types used
in calls - just had to manually drop the * from those.
import fileinput
import sys
import re
pat = re.compile(r'((?:=|:|^|\s)call\s(?:[^@]*?))(\s*$|\s*(?:(?:\[\[[a-zA-Z0-9_]+\]\]|[@%](?:(")?[\\\?@a-zA-Z0-9_.]*?(?(3)"|)|{{.*}}))(?:\(|$)|undef|inttoptr|bitcast|null|asm).*$)')
addrspace_end = re.compile(r"addrspace\(\d+\)\s*\*$")
func_end = re.compile("(?:void.*|\)\s*)\*$")
def conv(match, line):
if not match or re.search(addrspace_end, match.group(1)) or not re.search(func_end, match.group(1)):
return line
return line[:match.start()] + match.group(1)[:match.group(1).rfind('*')].rstrip() + match.group(2) + line[match.end():]
for line in sys.stdin:
sys.stdout.write(conv(re.search(pat, line), line))
llvm-svn: 235145
Unify the error messages for the various tools when `verifyModule()`
fails on an input module. The "brave new way" is:
lltool: path/to/input.ll: error: input module is broken!
llvm-svn: 233667
Fix testcases that don't pass the verifier after a WIP patch to check
`MDSubprogram` operands more effectively. I found the following issues:
- When `isDefinition: false`, the `variables:` field might point at
`!{i32 786468}`, or at a tuple that pointed at an empty tuple with
the comment "previously: invalid DW_TAG_base_type" (I vaguely recall
adding those comments during an upgrade script). In these cases, I
just dropped the array.
- The `variables:` field might point at something like `!{!{!8}}`,
where `!8` was an `MDLocation`. I removed the extra layer of
indirection.
- Invalid `type:` (not an `MDSubroutineType`).
llvm-svn: 233466
Fix debug info in these tests, which started failing with a WIP patch to
verify compile units and types. The problems look like they were all
caused by bitrot. They fell into these categories:
- Using `!{i32 0}` instead of `!{}`.
- Using `!{null}` instead of `!{}`.
- Using `!MDExpression()` instead of `!{}`.
- Using `!8` instead of `!{!8}`.
- `file:` references that pointed at `MDCompileUnit`s instead of the
same `MDFile` as the compile unit.
- `file:` references that were numerically off-by-one or (off-by-ten).
llvm-svn: 233415
Dropping old debug format requires the entire module to be read upfront.
This was failing only with the gold plugin, but that is just because
llvm-link was not upgrading metadata.
The new testcase using llvm-link shows the problem.
llvm-svn: 233381
Check accessors of `MDLocation`, and change them to `cast<>` down to the
right types. Also add type-safe factory functions.
All the callers that handle broken code need to use the new versions of
the accessors (`getRawScope()` instead of `getScope()`) that still
return `Metadata*`. This is also necessary for things like
`MDNodeKeyImpl<MDLocation>` (in LLVMContextImpl.h) that need to unique
the nodes when their operands might still be forward references of the
wrong type.
In the `Value` hierarchy, consumers that handle broken code use
`getOperand()` directly. However, debug info nodes have a ton of
operands, and their order (even their existence) isn't stable yet. It's
safer and more maintainable to add an explicit "raw" accessor on the
class itself.
llvm-svn: 233322
This reverts commit r233254, effectively reapplying r233164 (and its
successors), with an additional testcase for when subprograms match
exactly. This fixes PR22792 (again).
I'm using the same approach, but I've moved up the call to
`stripReplacedSubprograms()`. The function pointers need to be dropped
before mapping any metadata from the source module, or else this can
drop the function from new subprograms that have merged (via Metadata
uniquing) with the old ones. Dropping the pointers first prevents them
from merging.
**** The original commit message follows. ****
Linker: Drop function pointers for overridden subprograms
Instead of dropping subprograms that have been overridden, just set
their function pointers to `nullptr`. This is a minor adjustment to the
stop-gap fix for PR21910 committed in r224487, and fixes the crasher
from PR22792.
The problem that r224487 put a band-aid on: how do we find the canonical
subprogram for a `Function`? Since the backend currently relies on
`DebugInfoFinder` (which does a naive in-order traversal of compile
units and picks the first subprogram) for this, r224487 tried dropping
non-canonical subprograms.
Dropping subprograms fails because the backend *also* builds up a map
from subprogram to compile unit (`DwarfDebug::SPMap`) based on the
subprogram lists. A missing subprogram causes segfaults later when an
inlined reference (such as in this testcase) is created.
Instead, just drop the `Function` pointer to `nullptr`, which nicely
mirrors what happens when an already-inlined `Function` is optimized
out. We can't really be sure that it's the same definition anyway, as
the testcase demonstrates.
This still isn't completely satisfactory. Two flaws at least that I can
think of:
- I still haven't found a straightforward way to make this symmetric
in the IR. (Interestingly, the DWARF output is already symmetric,
and I've tested for that to be sure we don't regress.)
- Using `DebugInfoFinder` to find the canonical subprogram for a
function is kind of crazy. We should just attach metadata to the
function, like this:
define weak i32 @foo(i32, i32) !dbg !MDSubprogram(...) {
llvm-svn: 233302
Otherwise, broken input modules can cause assertions. I've updated two
of the testcases that started failing (modules that had `Require` flags
but didn't meet their own requirements), but Rafael and I decided that
test/Linker/2011-08-22-ResolveAlias.ll should just be deleted outright
-- it's a leftover of the way llvm-gcc used to implement weakref.
llvm-svn: 233229
As dblaikie pointed out, if I stop setting `emissionKind: 2` then the
backend won't do magical things on Linux vs. Darwin. I had wrongly
assumed that there were stricter requirements on the input if we weren't
in line-tables-only mode, but apparently not.
With that knowledge, clean up this testcase a little more.
- Set `emissionKind: 1`.
- Add back checks for the weak version of @foo.
- Check more robustly that we have the right subprograms by checking
the `DW_AT_decl_file` and `DW_AT_decl_line` which now show up.
- Check the line table in isolation (since it's no longer doubling as
an indirect test for the subprogram of the weak version of @foo).
llvm-svn: 233221
Rewrite the checks from r233164 that I temporarily disabled in r233165.
It turns out that the line-tables only debug info we emit from `llc` is
(intentionally) different on Linux than on Darwin. r218129 started
skipping emission of subprograms with no inlined subroutines, and
r218702 was a spiritual revert of that behaviour for Darwin.
I think we can still test this in a platform-neutral way.
- Stop checking for the possibly missing `DW_TAG_subprogram` defining
the debug info for the real version of `@foo`.
- Start checking the line tables, ensuring that the right debug info
was used to generate them (grabbing `DW_AT_low_pc` from the compile
unit).
- I changed up the line numbers used in the "weak" version so it's
easier to follow.
This should hopefully finish off PR22792.
llvm-svn: 233207
At least one Linux bot [1] doesn't like my dwarfdump checks, so I've
disable those until I can investigate what's going on there. I'll
continue to track this in PR22792.
[1]: http://bb.pgr.jp/builders/cmake-llvm-x86_64-linux/builds/22863
llvm-svn: 233165
Instead of dropping subprograms that have been overridden, just set
their function pointers to `nullptr`. This is a minor adjustment to the
stop-gap fix for PR21910 committed in r224487, and fixes the crasher
from PR22792.
The problem that r224487 put a band-aid on: how do we find the canonical
subprogram for a `Function`? Since the backend currently relies on
`DebugInfoFinder` (which does a naive in-order traversal of compile
units and picks the first subprogram) for this, r224487 tried dropping
non-canonical subprograms.
Dropping subprograms fails because the backend *also* builds up a map
from subprogram to compile unit (`DwarfDebug::SPMap`) based on the
subprogram lists. A missing subprogram causes segfaults later when an
inlined reference (such as in this testcase) is created.
Instead, just drop the `Function` pointer to `nullptr`, which nicely
mirrors what happens when an already-inlined `Function` is optimized
out. We can't really be sure that it's the same definition anyway, as
the testcase demonstrates.
This still isn't completely satisfactory. Two flaws at least that I can
think of:
- I still haven't found a straightforward way to make this symmetric
in the IR. (Interestingly, the DWARF output is already symmetric,
and I've tested for that to be sure we don't regress.)
- Using `DebugInfoFinder` to find the canonical subprogram for a
function is kind of crazy. We should just attach metadata to the
function, like this:
define weak i32 @foo(i32, i32) !dbg !MDSubprogram(...) {
llvm-svn: 233164
Similar to gep (r230786) and load (r230794) changes.
Similar migration script can be used to update test cases, which
successfully migrated all of LLVM and Polly, but about 4 test cases
needed manually changes in Clang.
(this script will read the contents of stdin and massage it into stdout
- wrap it in the 'apply.sh' script shown in previous commits + xargs to
apply it over a large set of test cases)
import fileinput
import sys
import re
rep = re.compile(r"(getelementptr(?:\s+inbounds)?\s*\()((<\d*\s+x\s+)?([^@]*?)(|\s*addrspace\(\d+\))\s*\*(?(3)>)\s*)(?=$|%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|zeroinitializer|<|\[\[[a-zA-Z]|\{\{)", re.MULTILINE | re.DOTALL)
def conv(match):
line = match.group(1)
line += match.group(4)
line += ", "
line += match.group(2)
return line
line = sys.stdin.read()
off = 0
for match in re.finditer(rep, line):
sys.stdout.write(line[off:match.start()])
sys.stdout.write(conv(match))
off = match.end()
sys.stdout.write(line[off:])
llvm-svn: 232184
There are still 4 tests that check for DW_AT_MIPS_linkage_name,
because they specify DWARF 2 or 3 in the module metadata. So, I didn't
create an explicit version-based test for the attribute.
Differential Revision: http://reviews.llvm.org/D8227
llvm-svn: 231880
We would set the body of a struct type (therefore making it non-opaque)
but were forgetting to move it to the non-opaque set.
Fixes pr22807.
llvm-svn: 231442
Summary:
DataLayout keeps the string used for its creation.
As a side effect it is no longer needed in the Module.
This is "almost" NFC, the string is no longer
canonicalized, you can't rely on two "equals" DataLayout
having the same string returned by getStringRepresentation().
Get rid of DataLayoutPass: the DataLayout is in the Module
The DataLayout is "per-module", let's enforce this by not
duplicating it more than necessary.
One more step toward non-optionality of the DataLayout in the
module.
Make DataLayout Non-Optional in the Module
Module->getDataLayout() will never returns nullptr anymore.
Reviewers: echristo
Subscribers: resistor, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D7992
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 231270
Move the specialized metadata nodes for the new debug info hierarchy
into place, finishing off PR22464. I've done bootstraps (and all that)
and I'm confident this commit is NFC as far as DWARF output is
concerned. Let me know if I'm wrong :).
The code changes are fairly mechanical:
- Bumped the "Debug Info Version".
- `DIBuilder` now creates the appropriate subclass of `MDNode`.
- Subclasses of DIDescriptor now expect to hold their "MD"
counterparts (e.g., `DIBasicType` expects `MDBasicType`).
- Deleted a ton of dead code in `AsmWriter.cpp` and `DebugInfo.cpp`
for printing comments.
- Big update to LangRef to describe the nodes in the new hierarchy.
Feel free to make it better.
Testcase changes are enormous. There's an accompanying clang commit on
its way.
If you have out-of-tree debug info testcases, I just broke your build.
- `upgrade-specialized-nodes.sh` is attached to PR22564. I used it to
update all the IR testcases.
- Unfortunately I failed to find way to script the updates to CHECK
lines, so I updated all of these by hand. This was fairly painful,
since the old CHECKs are difficult to reason about. That's one of
the benefits of the new hierarchy.
This work isn't quite finished, BTW. The `DIDescriptor` subclasses are
almost empty wrappers, but not quite: they still have loose casting
checks (see the `RETURN_FROM_RAW()` macro). Once they're completely
gutted, I'll rename the "MD" classes to "DI" and kill the wrappers. I
also expect to make a few schema changes now that it's easier to reason
about everything.
llvm-svn: 231082
The internal shell was already threading around a 'cwd' parameter. We
just have to make it mutable so that we can update it as the test script
executes.
If the shell ever grows support for environment variable substitution,
we could also implement support for export.
llvm-svn: 231017
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
llvm-svn: 230794
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
llvm-svn: 230786
This commit makes the following changes:
- Stop issuing a warning when the triples' string representations do not match
exactly if the Triple objects generated from the strings compare equal.
- On Apple platforms, choose the triple that has the larger minimum version
number.
rdar://problem/16743513
Differential Revision: http://reviews.llvm.org/D7591
llvm-svn: 228999
Track unresolved nodes under distinct `MDNode`s during `MapMetadata()`,
and resolve them at the end. Previously, these cycles wouldn't get
resolved.
llvm-svn: 228180
This commit moves `MDLocation`, finishing off PR21433. There's an
accompanying clang commit for frontend testcases. I'll attach the
testcase upgrade script I used to PR21433 to help out-of-tree
frontends/backends.
This changes the schema for `DebugLoc` and `DILocation` from:
!{i32 3, i32 7, !7, !8}
to:
!MDLocation(line: 3, column: 7, scope: !7, inlinedAt: !8)
Note that empty fields (line/column: 0 and inlinedAt: null) don't get
printed by the assembly writer.
llvm-svn: 226048
Create new copies of distinct `MDNode`s instead of following the
uniquing `MDNode` logic.
Just like self-references (or other cycles), `MapMetadata()` creates a
new node. In practice most calls use `RF_NoModuleLevelChanges`, in
which case nothing is duplicated anyway.
Part of PR22111.
llvm-svn: 225476
`MDNode::replaceOperandWith()` changes all instances of metadata. Stop
using it when linking module flags, since (due to uniquing) the flag
values could be used by other metadata.
Instead, use new API `NamedMDNode::setOperand()` to update the reference
directly.
llvm-svn: 225397
In order to make comdats always explicit in the IR, we decided to make
the syntax a bit more compact for the case of a GlobalObject in a
comdat with the same name.
Just dropping the $name causes problems for
@foo = globabl i32 0, comdat
$bar = comdat ...
and
declare void @foo() comdat
$bar = comdat ...
So the syntax is changed to
@g1 = globabl i32 0, comdat($c1)
@g2 = globabl i32 0, comdat
and
declare void @foo() comdat($c1)
declare void @foo() comdat
llvm-svn: 225302
This reverts commit r224416, reapplying r224389. The buildbots hadn't
recovered after my revert, waiting until David reverted a couple of his
commits. It looks like it was just bad timing (where we were both
modifying code related to the same assertion). Trying again...
Here's the original text:
When a function gets replaced by `ModuleLinker`, drop superseded
subprograms. This ensures that the "first" subprogram pointing at a
function is the same one that `!dbg` references point at.
This is a stop-gap fix for PR21910. Notably, this fixes Release+Asserts
bootstraps that are currently asserting out in
`LexicalScopes::initialize()` due to the explicit instantiations in
`lib/IR/Dominators.cpp` eventually getting replaced by -argpromotion.
llvm-svn: 224487
When a function gets replaced by `ModuleLinker`, drop superseded
subprograms. This ensures that the "first" subprogram pointing at a
function is the same one that `!dbg` references point at.
This is a stop-gap fix for PR21910. Notably, this fixes Release+Asserts
bootstraps that are currently asserting out in
`LexicalScopes::initialize()` due to the explicit instantiations in
`lib/IR/Dominators.cpp` eventually getting replaced by -argpromotion.
llvm-svn: 224389
Now that `Metadata` is typeless, reflect that in the assembly. These
are the matching assembly changes for the metadata/value split in
r223802.
- Only use the `metadata` type when referencing metadata from a call
intrinsic -- i.e., only when it's used as a `Value`.
- Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode`
when referencing it from call intrinsics.
So, assembly like this:
define @foo(i32 %v) {
call void @llvm.foo(metadata !{i32 %v}, metadata !0)
call void @llvm.foo(metadata !{i32 7}, metadata !0)
call void @llvm.foo(metadata !1, metadata !0)
call void @llvm.foo(metadata !3, metadata !0)
call void @llvm.foo(metadata !{metadata !3}, metadata !0)
ret void, !bar !2
}
!0 = metadata !{metadata !2}
!1 = metadata !{i32* @global}
!2 = metadata !{metadata !3}
!3 = metadata !{}
turns into this:
define @foo(i32 %v) {
call void @llvm.foo(metadata i32 %v, metadata !0)
call void @llvm.foo(metadata i32 7, metadata !0)
call void @llvm.foo(metadata i32* @global, metadata !0)
call void @llvm.foo(metadata !3, metadata !0)
call void @llvm.foo(metadata !{!3}, metadata !0)
ret void, !bar !2
}
!0 = !{!2}
!1 = !{i32* @global}
!2 = !{!3}
!3 = !{}
I wrote an upgrade script that handled almost all of the tests in llvm
and many of the tests in cfe (even handling many `CHECK` lines). I've
attached it (or will attach it in a moment if you're speedy) to PR21532
to help everyone update their out-of-tree testcases.
This is part of PR21532.
llvm-svn: 224257
Canonicalize formatting of metadata to make it easier to upgrade via
scripts -- in particular, one line per metadata definition makes it more
`sed`-able.
This is preparation for changing the assembly syntax for metadata [1].
[1]: http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20141208/248449.html
llvm-svn: 224002
Split `Metadata` away from the `Value` class hierarchy, as part of
PR21532. Assembly and bitcode changes are in the wings, but this is the
bulk of the change for the IR C++ API.
I have a follow-up patch prepared for `clang`. If this breaks other
sub-projects, I apologize in advance :(. Help me compile it on Darwin
I'll try to fix it. FWIW, the errors should be easy to fix, so it may
be simpler to just fix it yourself.
This breaks the build for all metadata-related code that's out-of-tree.
Rest assured the transition is mechanical and the compiler should catch
almost all of the problems.
Here's a quick guide for updating your code:
- `Metadata` is the root of a class hierarchy with three main classes:
`MDNode`, `MDString`, and `ValueAsMetadata`. It is distinct from
the `Value` class hierarchy. It is typeless -- i.e., instances do
*not* have a `Type`.
- `MDNode`'s operands are all `Metadata *` (instead of `Value *`).
- `TrackingVH<MDNode>` and `WeakVH` referring to metadata can be
replaced with `TrackingMDNodeRef` and `TrackingMDRef`, respectively.
If you're referring solely to resolved `MDNode`s -- post graph
construction -- just use `MDNode*`.
- `MDNode` (and the rest of `Metadata`) have only limited support for
`replaceAllUsesWith()`.
As long as an `MDNode` is pointing at a forward declaration -- the
result of `MDNode::getTemporary()` -- it maintains a side map of its
uses and can RAUW itself. Once the forward declarations are fully
resolved RAUW support is dropped on the ground. This means that
uniquing collisions on changing operands cause nodes to become
"distinct". (This already happened fairly commonly, whenever an
operand went to null.)
If you're constructing complex (non self-reference) `MDNode` cycles,
you need to call `MDNode::resolveCycles()` on each node (or on a
top-level node that somehow references all of the nodes). Also,
don't do that. Metadata cycles (and the RAUW machinery needed to
construct them) are expensive.
- An `MDNode` can only refer to a `Constant` through a bridge called
`ConstantAsMetadata` (one of the subclasses of `ValueAsMetadata`).
As a side effect, accessing an operand of an `MDNode` that is known
to be, e.g., `ConstantInt`, takes three steps: first, cast from
`Metadata` to `ConstantAsMetadata`; second, extract the `Constant`;
third, cast down to `ConstantInt`.
The eventual goal is to introduce `MDInt`/`MDFloat`/etc. and have
metadata schema owners transition away from using `Constant`s when
the type isn't important (and they don't care about referring to
`GlobalValue`s).
In the meantime, I've added transitional API to the `mdconst`
namespace that matches semantics with the old code, in order to
avoid adding the error-prone three-step equivalent to every call
site. If your old code was:
MDNode *N = foo();
bar(isa <ConstantInt>(N->getOperand(0)));
baz(cast <ConstantInt>(N->getOperand(1)));
bak(cast_or_null <ConstantInt>(N->getOperand(2)));
bat(dyn_cast <ConstantInt>(N->getOperand(3)));
bay(dyn_cast_or_null<ConstantInt>(N->getOperand(4)));
you can trivially match its semantics with:
MDNode *N = foo();
bar(mdconst::hasa <ConstantInt>(N->getOperand(0)));
baz(mdconst::extract <ConstantInt>(N->getOperand(1)));
bak(mdconst::extract_or_null <ConstantInt>(N->getOperand(2)));
bat(mdconst::dyn_extract <ConstantInt>(N->getOperand(3)));
bay(mdconst::dyn_extract_or_null<ConstantInt>(N->getOperand(4)));
and when you transition your metadata schema to `MDInt`:
MDNode *N = foo();
bar(isa <MDInt>(N->getOperand(0)));
baz(cast <MDInt>(N->getOperand(1)));
bak(cast_or_null <MDInt>(N->getOperand(2)));
bat(dyn_cast <MDInt>(N->getOperand(3)));
bay(dyn_cast_or_null<MDInt>(N->getOperand(4)));
- A `CallInst` -- specifically, intrinsic instructions -- can refer to
metadata through a bridge called `MetadataAsValue`. This is a
subclass of `Value` where `getType()->isMetadataTy()`.
`MetadataAsValue` is the *only* class that can legally refer to a
`LocalAsMetadata`, which is a bridged form of non-`Constant` values
like `Argument` and `Instruction`. It can also refer to any other
`Metadata` subclass.
(I'll break all your testcases in a follow-up commit, when I propagate
this change to assembly.)
llvm-svn: 223802
We were already lazily linking functions, but all GlobalValues can be treated
uniformly for this.
The test updates are to ensure that a given GlobalValue is still linked in.
This fixes pr21494.
llvm-svn: 223681
The non-opaque part can be structurally uniqued. To keep this to just
a hash lookup, we don't try to unique cyclic types.
Also change the type mapping algorithm to be optimistic about a type
not being recursive and only create a new type when proven to be wrong.
This is not as strong as trying to speculate that we can keep the source
type, but is simpler (no speculation to revert) and more powerfull
than what we had before (we don't copy non-recursive types at least).
I initially wrote this to try to replace the name based type merging.
It is not strong enough to replace it, but is is a useful addition.
With this patch the number of named struct types is a clang lto bootstrap goes
from 49674 to 15986.
llvm-svn: 223278
When lazy reading a module, the types used in a function will not be visible to
a TypeFinder until the body is read.
This patch fixes that by asking the module for its identified struct types.
If a materializer is present, the module asks it. If not, it uses a TypeFinder.
This fixes pr21374.
I will be the first to say that this is ugly, but it was the best I could find.
Some of the options I looked at:
* Asking the LLVMContext. This could be made to work for gold, but not currently
for ld64. ld64 will load multiple modules into a single context before merging
them. This causes us to see types from future merges. Unfortunately,
MappedTypes is not just a cache when it comes to opaque types. Once the
mapping has been made, we have to remember it for as long as the key may
be used. This would mean moving MappedTypes to the Linker class and having
to drop the Linker::LinkModules static methods, which are visible from C.
* Adding an option to ignore function bodies in the TypeFinder. This would
fix the PR by picking the worst result. It would work, but unfortunately
we are currently quite dependent on the upfront type merging. I will
try to reduce our dependency, but it is not clear that we will be able
to get rid of it for now.
The only clean solution I could think of is making the Module own the types.
This would have other advantages, but it is a much bigger change. I will
propose it, but it is nice to have this fixed while that is discussed.
With the gold plugin, this patch takes the number of types in the LTO clang
binary from 52817 to 49669.
llvm-svn: 223215
Patch by Ben Gamari!
This redefines the `prefix` attribute introduced previously and
introduces a `prologue` attribute. There are a two primary usecases
that these attributes aim to serve,
1. Function prologue sigils
2. Function hot-patching: Enable the user to insert `nop` operations
at the beginning of the function which can later be safely replaced
with a call to some instrumentation facility
3. Runtime metadata: Allow a compiler to insert data for use by the
runtime during execution. GHC is one example of a compiler that
needs this functionality for its tables-next-to-code functionality.
Previously `prefix` served cases (1) and (2) quite well by allowing the user
to introduce arbitrary data at the entrypoint but before the function
body. Case (3), however, was poorly handled by this approach as it
required that prefix data was valid executable code.
Here we redefine the notion of prefix data to instead be data which
occurs immediately before the function entrypoint (i.e. the symbol
address). Since prefix data now occurs before the function entrypoint,
there is no need for the data to be valid code.
The previous notion of prefix data now goes under the name "prologue
data" to emphasize its duality with the function epilogue.
The intention here is to handle cases (1) and (2) with prologue data and
case (3) with prefix data.
References
----------
This idea arose out of discussions[1] with Reid Kleckner in response to a
proposal to introduce the notion of symbol offsets to enable handling of
case (3).
[1] http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-May/073235.html
Test Plan: testsuite
Differential Revision: http://reviews.llvm.org/D6454
llvm-svn: 223189
The explicit set of destination types is not fully redundant when lazy loading
since the TypeFinder will not find types used only in function bodies.
This keeps the logic to drop the name of mapped types since it still helps
with avoiding further renaming.
llvm-svn: 223043
Instead of keeping an explicit set, just drop the names of types we choose
to map to some other type.
This has the advantage that the name of the unused will not cause the context
to rename types on module read.
llvm-svn: 222986
The original patch would fail when:
* A dst opaque type (%A) is matched with a src type (%A).
* A src opaque (%E) type is then speculatively matched with %A and the
speculation fails afterward.
* When rolling back the speculation we would cancel the source %A to dest
%A mapping.
The fix is to keep an explicit list of which resolutions are speculative.
Original message:
Fix overly aggressive type merging.
If we find out that two types are *not* isomorphic, we learn nothing about
opaque sub types in both the source and destination.
llvm-svn: 222923
This reverts commit r222727, which causes LTO bootstrap failures.
Last passing @ r222698:
http://lab.llvm.org:8080/green/job/clang-Rlto_master_build/532/
First failing @ r222843:
http://lab.llvm.org:8080/green/job/clang-Rlto_master_build/533/
Internal bootstraps pointed at a much narrower range: r222725 is
passing, and r222731 is failing.
LTO crashes while handling libclang.dylib:
http://lab.llvm.org:8080/green/job/clang-Rlto_master_build/533/consoleFull#-158682280549ba4694-19c4-4d7e-bec5-911270d8a58c
GEP is not of right type for indices!
%InfoObj.i.i = getelementptr inbounds %"class.llvm::OnDiskIterableChainedHashTable"* %.lcssa, i64 0, i32 0, i32 4, !dbg !123627
%"class.clang::serialization::reader::ASTIdentifierLookupTrait" = type { %"class.clang::ASTReader.31859"*, %"class.clang::serialization::ModuleFile.31870"*, %"class.clang::IdentifierInfo"* }LLVM ERROR: Broken function found, compilation aborted!
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Looks like the new algorithm doesn't merge types aggressively enough.
llvm-svn: 222895
This changes the order in which different types are passed to get, but
one order is not inherently better than the other.
The main motivation is that this simplifies linkDefinedTypeBodies now that
it is only linking "real" opaque types. It is also means that we only have to
call it once and that we don't need getImpl.
A small change in behavior is that we don't copy type names when resolving
opaque types. This is an improvement IMHO, but it can be added back if
desired. A test is included with the new behavior.
llvm-svn: 222764
Change uniquing from a `FoldingSet` to a `DenseSet` with custom
`DenseMapInfo`. Unfortunately, this doesn't save any memory, since
`DenseSet<T>` is a simple wrapper for `DenseMap<T, char>`, but I'll come
back to fix that later.
I used the name `GenericDenseMapInfo` to the custom `DenseMapInfo` since
I'll be splitting `MDNode` into two classes soon: `MDNodeFwdDecl` for
temporaries, and `GenericMDNode` for everything else.
I also added a non-debug-info reduced version of a type-uniquing test
that started failing on an earlier draft of this patch.
Part of PR21532.
llvm-svn: 222191
Summary:
This makes PIC levels a Module flag attribute, which can be queried by the
backend. The flag is named `PIC Level`, and can have a value of:
0 - Backend-default
1 - Small-model (-fpic)
2 - Large-model (-fPIC)
These match the `-pic-level' command line argument for clang, and the value of the
preprocessor macro `__PIC__'.
Test Plan:
New flags tests specific for the 'PIC Level' module flag.
Tests to be added as part of a future commit for PowerPC, which will use this new API.
Reviewers: rafael, echristo
Reviewed By: rafael, echristo
Subscribers: rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D5882
llvm-svn: 221510
The issue was that linkAppendingVarProto does the full linking job, including
deleting the old dst variable. The fix is just to call it and return early
if we have a GV with appending linkage.
original message:
Refactor duplicated code in liking GlobalValues.
There is quiet a bit of logic that is common to any GlobalValue but was
duplicated for Functions, GlobalVariables and GlobalAliases.
While at it, merge visibility even when comdats are used, fixing pr21415.
llvm-svn: 221098
This commit introduces heap-use-after-free detected by ASan. Here is the output
for one of several tests that detect it:
******************** TEST 'LLVM :: Linker/AppendingLinkage.ll' FAILED ********************
Command Output (stderr):
--
=================================================================
==2122==ERROR: AddressSanitizer: heap-use-after-free on address 0x60c00000b9c8 at pc 0x0000005d05d1 bp 0x7fff64ed27c0 sp 0x7fff64ed27b8
READ of size 4 at 0x60c00000b9c8 thread T0
#0 0x5d05d0 in llvm::GlobalValue::setUnnamedAddr(bool) /usr/local/google/home/chandlerc/src/llvm/build/../include/llvm/IR/GlobalValue.h:115:35
#1 0x69fff1 in (anonymous namespace)::ModuleLinker::linkGlobalValueProto(llvm::GlobalValue*) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1041:5
#2 0x697229 in (anonymous namespace)::ModuleLinker::run() /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1485:9
#3 0x696542 in llvm::Linker::linkInModule(llvm::Module*) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1621:10
#4 0x4a2db7 in main /usr/local/google/home/chandlerc/src/llvm/build/../tools/llvm-link/llvm-link.cpp:116:9
#5 0x7f4ae61e5ec4 in __libc_start_main /build/buildd/eglibc-2.19/csu/libc-start.c:287
#6 0x41eb71 in _start (/usr/local/google/home/chandlerc/src/llvm/build/bin/llvm-link+0x41eb71)
0x60c00000b9c8 is located 72 bytes inside of 128-byte region [0x60c00000b980,0x60c00000ba00)
freed by thread T0 here:
#0 0x4a1e6b in operator delete(void*) /usr/local/google/home/chandlerc/src/llvm/opt-build/../projects/compiler-rt/lib/asan/asan_new_delete.cc:94:3
#1 0x5d1a7a in llvm::iplist<llvm::GlobalVariable, llvm::ilist_traits<llvm::GlobalVariable> >::erase(llvm::ilist_iterator<llvm::GlobalVariable>) /usr/local/google/home/chandlerc/src/llvm/build/../inclu
de/llvm/ADT/ilist.h:466:5
#2 0x5d1980 in llvm::GlobalVariable::eraseFromParent() /usr/local/google/home/chandlerc/src/llvm/build/../lib/IR/Globals.cpp:204:3
#3 0x6a8a4d in (anonymous namespace)::ModuleLinker::linkAppendingVarProto(llvm::GlobalVariable*, llvm::GlobalVariable const*) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.
cpp:980:3
#4 0x6a7403 in (anonymous namespace)::ModuleLinker::linkGlobalVariableProto(llvm::GlobalVariable const*, llvm::GlobalValue*, bool) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkMod
ules.cpp:1074:11
#5 0x69ff4e in (anonymous namespace)::ModuleLinker::linkGlobalValueProto(llvm::GlobalValue*) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1028:13
#6 0x697229 in (anonymous namespace)::ModuleLinker::run() /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1485:9
#7 0x696542 in llvm::Linker::linkInModule(llvm::Module*) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1621:10
#8 0x4a2db7 in main /usr/local/google/home/chandlerc/src/llvm/build/../tools/llvm-link/llvm-link.cpp:116:9
#9 0x7f4ae61e5ec4 in __libc_start_main /build/buildd/eglibc-2.19/csu/libc-start.c:287
previously allocated by thread T0 here:
#0 0x4a192b in operator new(unsigned long) /usr/local/google/home/chandlerc/src/llvm/opt-build/../projects/compiler-rt/lib/asan/asan_new_delete.cc:62:35
#1 0x61d85c in llvm::User::operator new(unsigned long, unsigned int) /usr/local/google/home/chandlerc/src/llvm/build/../lib/IR/User.cpp:57:19
#2 0x6a7525 in (anonymous namespace)::ModuleLinker::linkGlobalVariableProto(llvm::GlobalVariable const*, llvm::GlobalValue*, bool) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkMod
ules.cpp:1100:3
#3 0x69ff4e in (anonymous namespace)::ModuleLinker::linkGlobalValueProto(llvm::GlobalValue*) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1028:13
#4 0x697229 in (anonymous namespace)::ModuleLinker::run() /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1485:9
#5 0x696542 in llvm::Linker::linkInModule(llvm::Module*) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1621:10
#6 0x4a2db7 in main /usr/local/google/home/chandlerc/src/llvm/build/../tools/llvm-link/llvm-link.cpp:116:9
#7 0x7f4ae61e5ec4 in __libc_start_main /build/buildd/eglibc-2.19/csu/libc-start.c:287
SUMMARY: AddressSanitizer: heap-use-after-free /usr/local/google/home/chandlerc/src/llvm/build/../include/llvm/IR/GlobalValue.h:115 llvm::GlobalValue::setUnnamedAddr(bool)
Shadow bytes around the buggy address:
0x0c187fff96e0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
0x0c187fff96f0: 00 00 00 00 00 00 00 fa fa fa fa fa fa fa fa fa
0x0c187fff9700: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fa
0x0c187fff9710: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
0x0c187fff9720: 00 00 00 00 00 00 00 00 fa fa fa fa fa fa fa fa
=>0x0c187fff9730: fd fd fd fd fd fd fd fd fd[fd]fd fd fd fd fd fd
0x0c187fff9740: fa fa fa fa fa fa fa fa fd fd fd fd fd fd fd fd
0x0c187fff9750: fd fd fd fd fd fd fd fa fa fa fa fa fa fa fa fa
0x0c187fff9760: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c187fff9770: fa fa fa fa fa fa fa fa fd fd fd fd fd fd fd fd
0x0c187fff9780: fd fd fd fd fd fd fd fd fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Heap right redzone: fb
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack partial redzone: f4
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
ASan internal: fe
==2122==ABORTING
llvm-svn: 221096
There is quiet a bit of logic that is common to any GlobalValue but was
duplicated for Functions, GlobalVariables and GlobalAliases.
While at it, merge visibility even when comdats are used, fixing pr21415.
llvm-svn: 221014
The langref says:
LLVM explicitly allows declarations of global variables to be marked
constant, even if the final definition of the global is not. This
capability can be used to enable slightly better optimization of the
program, but requires the language definition to guarantee that
optimizations based on the ‘constantness’ are valid for the
translation units that do not include the definition.
Given that definition, when merging two declarations, we have to drop
constantness if of of them is not marked contant, since the Module
without the constant marker might not have the necessary guarantees.
llvm-svn: 220927
This reverts commit r218918, effectively reapplying r218914 after fixing
an Ocaml bindings test and an Asan crash. The root cause of the latter
was a tightened-up check in `DILexicalBlock::Verify()`, so I'll file a
PR to investigate who requires the loose check (and why).
Original commit message follows.
--
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
llvm-svn: 219010
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
llvm-svn: 218914
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
Note: I accidentally committed a bogus older version of this patch previously.
llvm-svn: 218787
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
llvm-svn: 218778
When linking llvm.global_ctors with the optional third element we have to handle
it specially and only copy the elements whose keys were also copied.
llvm-svn: 217281
specifier and change the default behavior to only emit the
DW_AT_accessibility(public) attribute when the isPublic() is explicitly
set.
rdar://problem/18154959
llvm-svn: 216799
We were setting the comdat when functions were copied in the initial pass, but
not when they were linked only when we found out that they are needed.
llvm-svn: 215765
An optional third field was added to `llvm.global_ctors` (and
`llvm.global_dtors`) in r209015. Most of the code has been changed to
deal with both versions of the variables. Users of the C API might
create either version, the helper functions in LLVM create the two-field
version, and clang now creates the three-field version.
However, the BitcodeReader was changed to always upgrade to the
three-field version. This created an unnecessary inconsistency in the
IR before/after serializing to bitcode.
This commit resolves the inconsistency by making the third field truly
optional (and not upgrading in the bitcode reader). Since `llvm-link`
was relying on this upgrade code, rather than deleting it I've moved it
into `ModuleLinker`, where it upgrades these arrays as necessary to
resolve inconsistencies between modules.
The ideal resolution would be to remove the 2-field version and make the
third field required. I filed PR20506 to track that.
I changed `test/Bitcode/upgrade-global-ctors.ll` to a negative test and
duplicated the `llvm-link` check in `test/Linker/global_ctors.ll` to
check both upgrade directions.
Since I came across this as part of PR5680 (serializing use-list order),
I've also added the missing `verify-uselistorder` RUN line to
`test/Bitcode/metadata-2.ll`.
llvm-svn: 215457
Before this patch we had
@a = weak global ...
but
@b = alias weak ...
The patch changes aliases to look more like global variables.
Looking at some really old code suggests that the reason was that the old
bison based parser had a reduction for alias linkages and another one for
global variable linkages. Putting the alias first avoided the reduce/reduce
conflict.
The days of the old .ll parser are long gone. The new one parses just "linkage"
and a later check is responsible for deciding if a linkage is valid in a
given context.
llvm-svn: 214355
DITypeArray is an array of DITypeRef, at its creation, we will create
DITypeRef (i.e use the identifier if the type node has an identifier).
This is the last patch to unique the type array of a subroutine type.
rdar://17628609
llvm-svn: 214132
This new IR facility allows us to represent the object-file semantic of
a COMDAT group.
COMDATs allow us to tie together sections and make the inclusion of one
dependent on another. This is required to implement features like MS
ABI VFTables and optimizing away certain kinds of initialization in C++.
This functionality is only representable in COFF and ELF, Mach-O has no
similar mechanism.
Differential Revision: http://reviews.llvm.org/D4178
llvm-svn: 211920
Alias with unnamed_addr were in a strange state. It is stored in GlobalValue,
the language reference talks about "unnamed_addr aliases" but the verifier
was rejecting them.
It seems natural to allow unnamed_addr in aliases:
* It is a property of how it is accessed, not of the data itself.
* It is perfectly possible to write code that depends on the address
of an alias.
This patch then makes unname_addr legal for aliases. One side effect is that
the syntax changes for a corner case: In globals, unnamed_addr is now printed
before the address space.
llvm-svn: 210302
This patch changes GlobalAlias to point to an arbitrary ConstantExpr and it is
up to MC (or the system assembler) to decide if that expression is valid or not.
This reduces our ability to diagnose invalid uses and how early we can spot
them, but it also lets us do things like
@test5 = alias inttoptr(i32 sub (i32 ptrtoint (i32* @test2 to i32),
i32 ptrtoint (i32* @bar to i32)) to i32*)
An important implication of this patch is that the notion of aliased global
doesn't exist any more. The alias has to encode the information needed to
access it in its metadata (linkage, visibility, type, etc).
Another consequence to notice is that getSection has to return a "const char *".
It could return a NullTerminatedStringRef if there was such a thing, but when
that was proposed the decision was to just uses "const char*" for that.
llvm-svn: 210062
A further step to correctly emitting concrete out of line definitions
preceeding inlined instances of the same program.
To do this, emission of subprograms must be delayed until required since
we don't know which (abstract only (if there's no out of line
definition), concrete only (if there are no inlined instances), or both)
DIEs are required at the start of the module.
To reduce the test churn in the following commit that actually fixes the
bug, this commit introduces the lazy DIE construction and cleans up test
cases that are impacted by the changes in the resulting DIE ordering.
llvm-svn: 209675
In an effort to fix inlined debug info in situations where the out of
line definition of a function preceeds any inlined usage, the order in
which some attributes are added to subprogram DIEs may change. (in
essence, definition-necessary attributes like DW_AT_low_pc/high_pc will
be added immediately, but the names, types, and other features will be
delayed to module end where they may either be added to the subprogram
DIE or instead reference an abstract definition for those values)
These tests can be generalized to be resilient to this change. 5 or so
tests actually have to be incompatibly changed to cope with this
reordering and will go along with the change that affects the order.
llvm-svn: 209554
This allows us to put dynamic initializers for weak data into the same
comdat group as the data being initialized. This is necessary for MSVC
ABI compatibility. Once we have comdats for guard variables, we can use
the combination to help GlobalOpt fire more often for weak data with
guarded initialization on other platforms.
Reviewers: nlewycky
Differential Revision: http://reviews.llvm.org/D3499
llvm-svn: 209015
This patch changes the design of GlobalAlias so that it doesn't take a
ConstantExpr anymore. It now points directly to a GlobalObject, but its type is
independent of the aliasee type.
To avoid changing all alias related tests in this patches, I kept the common
syntax
@foo = alias i32* @bar
to mean the same as now. The cases that used to use cast now use the more
general syntax
@foo = alias i16, i32* @bar.
Note that GlobalAlias now behaves a bit more like GlobalVariable. We
know that its type is always a pointer, so we omit the '*'.
For the bitcode, a nice surprise is that we were writing both identical types
already, so the format change is minimal. Auto upgrade is handled by looking
through the casts and no new fields are needed for now. New bitcode will
simply have different types for Alias and Aliasee.
One last interesting point in the patch is that replaceAllUsesWith becomes
smart enough to avoid putting a ConstantExpr in the aliasee. This seems better
than checking and updating every caller.
A followup patch will delete getAliasedGlobal now that it is redundant. Another
patch will add support for an explicit offset.
llvm-svn: 209007
This allows us to catch more opportunities for ODR-based type uniquing
during LTO.
Paired commit with CFE which updates some testcases to verify the new
DIBuilder behavior.
llvm-svn: 204106
based on the ODR.
This adds an OdrMemberMap to DwarfDebug which is used to unique C++
member function declarations based on the unique identifier of their
containing class and their mangled name.
We can't use the usual DIRef mechanism here because DIScopes are indexed
using their entire MDNode, including decl_file and decl_line, which need
not be unique (see testcase).
Prior to this change multiple redundant member function declarations would
end up in the same uniqued DW_TAG_class_type.
llvm-svn: 203982
On ELF and COFF an alias is just another name for a position in the file.
There is no way to refer to a position in another file, so an alias to
undefined is meaningless.
MachO currently doesn't support aliases. The spec has a N_INDR, which when
implemented will have a different set of restrictions. Adding support for
it shouldn't be harder than any other IR extension.
For now, having the IR represent what is actually possible with current
tools makes it easier to fix the design of GlobalAlias.
llvm-svn: 203705
GuardMalloc can print info to stderr, causing these tests to fail.
Since FileCheck errors on empty inputs, just add a bit of dummy
data to make it happy.
llvm-svn: 203595
A bunch of test cases needed to be cleaned up for this, many my fault -
when implementid imported modules I updated test cases by simply
duplicating the prior metadata field - which wasn't always the empty
metadata entry.
llvm-svn: 200731
We are going to drop debug info without a version number or with a different
version number, to make sure we don't crash when we see bitcode files with
different debug info metadata format.
llvm-svn: 195504
We add a map in DwarfDebug to map MDNodes that are shareable across CUs to the
corresponding DIEs: MDTypeNodeToDieMap. These DIEs can be shared across CUs,
that is why we keep the maps in DwarfDebug instead of CompileUnit.
We make the assumption that if a DIE is not added to an owner yet, we assume
it belongs to the current CU. Since DIEs for the type system are added to
their owners immediately after creation, and other DIEs belong to the current
CU, the assumption should be true.
A testing case is added to show that we only create a single DIE for a type
MDNode and we use ref_addr to refer to the type DIE.
We also add a testing case to show ref_addr relocations for non-darwin
platforms.
llvm-svn: 193779
is updated to use DITypeRef.
Move isUnsignedDIType and getOriginalTypeSize from DebugInfo.h to be static
helper functions in DwarfCompileUnit. We already have a static helper function
"isTypeSigned" in DwarfCompileUnit, and a pointer to DwarfDebug is added to
resolve the derived-from field. All three functions need to go across link
for derived-from fields, so we need to get hold of a type identifier map.
A pointer to DwarfDebug is also added to DbgVariable in order to resolve the
derived-from field.
Debug info verifier is updated to check a derived-from field is a TypeRef.
Verifier will not go across link for derived-from fields, in debug info finder,
we go across the link to add derived-from fields to types.
Function getDICompositeType is only used by dragonegg and since dragonegg does
not generate identifier for types, we use an empty map to resolve the
derived-from field.
When printing a derived-from field, we use DITypeRef::getName to either return
the type identifier or getName of the DIType.
A paired commit at clang is required due to changes to DIBuilder.
llvm-svn: 192018
is updated to use DITypeRef.
Move isUnsignedDIType and getOriginalTypeSize from DebugInfo.h to be static
helper functions in DwarfCompileUnit. We already have a static helper function
"isTypeSigned" in DwarfCompileUnit, and a pointer to DwarfDebug is added to
resolve the derived-from field. All three functions need to go across link
for derived-from fields, so we need to get hold of a type identifier map.
A pointer to DwarfDebug is also added to DbgVariable in order to resolve the
derived-from field.
Debug info verifier is updated to check a derived-from field is a TypeRef.
Verifier will not go across link for derived-from fields, in debug info finder,
we go across the link to add derived-from fields to types.
Function getDICompositeType is only used by dragonegg and since dragonegg does
not generate identifier for types, we use an empty map to resolve the
derived-from field.
When printing a derived-from field, we use DITypeRef::getName to either return
the type identifier or getName of the DIType.
A paired commit at clang is required due to changes to DIBuilder.
llvm-svn: 191800
and it is shared across CUs.
We add a few maps in DwarfDebug to map MDNodes for the type system to the
corresponding DIEs: MDTypeNodeToDieMap, MDSPNodeToDieMap, and
MDStaticMemberNodeToDieMap. These DIEs can be shared across CUs, that is why we
keep the maps in DwarfDebug instead of CompileUnit.
Sometimes, when we try to add an attribute to a DIE, the DIE is not yet added
to its owner yet, so we don't know whether we should use ref_addr or ref4.
We create a worklist that will be processed during finalization to add
attributes with the correct form (ref_addr or ref4).
We add addDIEEntry to DwarfDebug to be a wrapper around DIE->addValue. It checks
whether we know the correct form, if not, we update the worklist
(DIEEntryWorklist).
A testing case is added to show that we only create a single DIE for a type
MDNode and we use ref_addr to refer to the type DIE.
llvm-svn: 191792
In DIBuilder, the context field of a TAG_member is updated to use the
scope reference. Verifier is updated accordingly.
DebugInfoFinder now needs to generate a type identifier map to have
access to the actual scope. Same applies for BreakpointPrinter.
processModule of DebugInfoFinder is called during initialization phase
of the verifier to make sure the type identifier map is constructed early
enough.
We are now able to unique a simple class as demonstrated by the added
testing case.
llvm-svn: 190334
Artem Belevich