TableGen checks at compiletime that for scheduling models with
"CompleteModel = 1" one of the following holds:
- Is marked with the hasNoSchedulingInfo flag
- The instruction is a subclass of Sched
- There are InstRW definitions in the scheduling model
Typical steps necessary to complete a model:
- Ensure all pseudo instructions that are expanded before machine
scheduling (usually everything handled with EmitYYY() functions in
XXXTargetLowering).
- If a CPU does not support some instructions mark the corresponding
resource unsupported: "WriteRes<WriteXXX, []> { let Unsupported = 1; }".
- Add missing scheduling information.
Differential Revision: http://reviews.llvm.org/D17747
llvm-svn: 262384
Summary:
This patch modifies the existing comparison, branch, conditional-move
and select patterns, and adds new ones where needed. Also, the updated
SLT{u,i,iu} set of instructions generate a GPR width result.
The majority of the code changes in the Mips back-end fix the wrong
assumption that the result of SETCC nodes always produce an i32 value.
The changes in the common code path account for the fact that in 64-bit
MIPS targets, i1 is promoted to i32 instead of i64.
Reviewers: dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D10970
llvm-svn: 262316
Summary:
The bug was that dextu's operand 3 would print 0-31 instead of 32-63 when
printing assembly. This came up when replacing
MipsInstPrinter::printUnsignedImm() with a version that could handle arbitrary
bit widths.
MipsAsmPrinter::printUnsignedImm*() don't seem to be used so they have been
removed.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D15521
llvm-svn: 262231
Summary:
Previously, it would always select DEXT and substitute any invalid matches
for DEXTU/DEXTM during MipsMCCodeEmitter::encodeInstruction(). This works
but causes problems when adding range checked immediates to IAS.
Now isel selects the correct variant up front.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D16810
llvm-svn: 262229
Change TargetInstrInfo API to take `MachineInstr&` instead of
`MachineInstr*` in the functions related to predicated instructions
(I'll try to come back later and get some of the rest). All of these
functions require non-null parameters already, so references are more
clear. As a bonus, this happens to factor away a host of implicit
iterator => pointer conversions.
No functionality change intended.
llvm-svn: 261605
Delete MachineInstr::getIterator(), since the term "iterator" is
overloaded when talking about MachineInstr.
- Downcast to ilist_node in iplist::getNextNode() and getPrevNode() so
that ilist_node::getIterator() is still available.
- Add it back as MachineInstr::getInstrIterator(). This matches the
naming in MachineBasicBlock.
- Add MachineInstr::getBundleIterator(). This is explicitly called
"bundle" (not matching MachineBasicBlock) to disintinguish it clearly
from ilist_node::getIterator().
- Update all calls. Some of these I switched to `auto` to remove
boiler-plate, since the new name is clear about the type.
There was one call I updated that looked fishy, but it wasn't clear what
the right answer was. This was in X86FrameLowering::inlineStackProbe(),
added in r252578 in lib/Target/X86/X86FrameLowering.cpp. I opted to
leave the behaviour unchanged, but I'll reply to the original commit on
the list in a moment.
llvm-svn: 261504
This section is used for debug information and has no need to be
in memory at runtime. This patch also fixes an error when compiling
the Linux kernel. The error is that there are relocations within the
.pdr section in a VDSO. SHT_REL was removed as it is a section type
and not a section flag, therefore it does not make sense for it to
be there. With this patch, LLVM now emits the same flags as
the GNU assembler.
llvm-svn: 261083
Summary:
In order to pass the tests, this required marking R_MIPS_16 relocations
as needing to point to the symbol and not the section.
Reviewers: vkalintiris, dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D17200
llvm-svn: 260896
Summary:
This section is used for debug information and has no need to be
in memory at runtime. With this patch, LLVM now emits the same flags as
the GNU assembler. This patch also fixes an error when compiling
the Linux kernel, The error is that there are relocations within the
.pdr section in a VDSO.
Reviewers: vkalintiris, dsanders
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D17199
llvm-svn: 260879
Now the parser supports `%got(sym)` expressions only but `%got(sym + const)`
variant is also valid and accepted by GAS.
Differential Revision: http://reviews.llvm.org/D16885
llvm-svn: 260305
MIPS ABI states that .sbss and .sdata sections must have SHF_MIPS_GPREL
flag. See Figure 4–7 on page 69 in the following document:
ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf.
Differential Revision: http://reviews.llvm.org/D15740
llvm-svn: 259641
Summary:
The bugs were:
* teq and similar take 4-bit unsigned immediates on microMIPS.
* teqi and similar have side-effects like teq do.
* shll_s.w and shra_r.w take 5-bit unsigned immediates.
* The various DSP ext* instructions take a 5-bit immediate.
* repl.qh takes an 8-bit unsigned immediate.
* repl.ph takes a 10-bit unsigned immediate.
* rddsp/wrdsp take a 10-bit unsigned immediate.
* teqi and similar take signed 16-bit immediates (10-bit for microMIPS).
* Out-of-range immediate macros for or/xor take a simm32/simm64 depending
on architecture. I'll fix the simm64 case properly when I reach simm32.
lui is a bit more lenient than GAS and accepts signed immediates in addition
to unsigned. This is because MipsMCExpr can produce signed values when
constant folding and it currently lacks a way of knowing it should fold to
an unsigned value.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D15446
llvm-svn: 259360
Author: milena.vujosevic.janicic
Reviewers: dsanders
FastIsel is not supported for microMIPS, thus it needs to be disabled.
Test micromips-zero-mat-uses.ll is deleted since the tested sequence of instructions is not generated for microMIPS without FastISel.
Differential Revision: http://reviews.llvm.org/D15892
llvm-svn: 259039
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
Summary:
This is now the same as the behaviour of the GNU assembler. This was done
as it is required in order to build the Linux kernel with the integrated
assembler enabled.
Reviewers: dsanders, vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13594
llvm-svn: 258400
Summary: The result register is the second operand as per the other mt* instructions.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D15993
llvm-svn: 257478
Summary:
It actually takes an offset into the current PC-region.
This fixes the 'expr' command in lldb.
Reviewers: vkalintiris, jaydeep, bhushan
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D16054
llvm-svn: 257339
These days relocations are created and stored in a deterministic way.
The order they are created is also suitable for the .o file, so we don't
need an explicit sort.
The last remaining exception is MIPS.
llvm-svn: 255902
This patch adds some missing calls to MBB::normalizeSuccProbs() in several
locations where it should be called. Those places are found by checking if the
sum of successors' probabilities is approximate one in MachineBlockPlacement
pass with some instrumented code (not in this patch).
Differential revision: http://reviews.llvm.org/D15259
llvm-svn: 255455
Summary:
Although the multiclass for i32 selects might seem redundant as it has
only one instantiation, we will use it to replace the correspondent
patterns in Mips64r6InstrInfo.td in follow-up commits.
Reviewers: dsanders
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D14612
llvm-svn: 255110
Commited patch was intended to implement LH, LHE, LHU and LHUE instructions.
After commit test-suite failed with error message in the form of:
fatal error: error in backend: Cannot select: t124: i32,ch = load<LD2[%d](tbaa=<0x94acc48>), sext from i16> t0, t2, undef:i32
For that reason I decided to revert commit r254897 and make new patch which besides implementation and standard regression tests will also have dedicated tests (CodeGen) for the above error.
llvm-svn: 255109
Summary:
We don't check the size operand on ext/dext*/ins/dins* yet because the
permitted range depends on the pos argument and we can't check that using
this mechanism.
The bug was that dextu/dinsu accepted 0..31 in the pos operand instead of 32..63.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D15190
llvm-svn: 255015
(This is the second attempt to submit this patch. The first caused two assertion
failures and was reverted. See https://llvm.org/bugs/show_bug.cgi?id=25687)
The patch in http://reviews.llvm.org/D13745 is broken into four parts:
1. New interfaces without functional changes (http://reviews.llvm.org/D13908).
2. Use new interfaces in SelectionDAG, while in other passes treat probabilities
as weights (http://reviews.llvm.org/D14361).
3. Use new interfaces in all other passes.
4. Remove old interfaces.
This patch is 3+4 above. In this patch, MBB won't provide weight-based
interfaces any more, which are totally replaced by probability-based ones.
The interface addSuccessor() is redesigned so that the default probability is
unknown. We allow unknown probabilities but don't allow using it together
with known probabilities in successor list. That is to say, we either have a
list of successors with all known probabilities, or all unknown
probabilities. In the latter case, we assume each successor has 1/N
probability where N is the number of successors. An assertion checks if the
user is attempting to add a successor with the disallowed mixed use as stated
above. This can help us catch many misuses.
All uses of weight-based interfaces are now updated to use probability-based
ones.
Differential revision: http://reviews.llvm.org/D14973
llvm-svn: 254377
and the follow-up r254356: "Fix a bug in MachineBlockPlacement that may cause assertion failure during BranchProbability construction."
Asserts were firing in Chromium builds. See PR25687.
llvm-svn: 254366
The patch in http://reviews.llvm.org/D13745 is broken into four parts:
1. New interfaces without functional changes (http://reviews.llvm.org/D13908).
2. Use new interfaces in SelectionDAG, while in other passes treat probabilities
as weights (http://reviews.llvm.org/D14361).
3. Use new interfaces in all other passes.
4. Remove old interfaces.
This patch is 3+4 above. In this patch, MBB won't provide weight-based
interfaces any more, which are totally replaced by probability-based ones.
The interface addSuccessor() is redesigned so that the default probability is
unknown. We allow unknown probabilities but don't allow using it together
with known probabilities in successor list. That is to say, we either have a
list of successors with all known probabilities, or all unknown
probabilities. In the latter case, we assume each successor has 1/N
probability where N is the number of successors. An assertion checks if the
user is attempting to add a successor with the disallowed mixed use as stated
above. This can help us catch many misuses.
All uses of weight-based interfaces are now updated to use probability-based
ones.
Differential revision: http://reviews.llvm.org/D14973
llvm-svn: 254348
Value of offset operand for microMIPS BALC and BC instructions is currently shifted 2 bits, but it should be 1 bit.
Differential Revision: http://reviews.llvm.org/D14770
llvm-svn: 254296
Summary:
The bugs were:
* append, prepend, and balign were not tested
* balign takes a uimm2 not a uimm5.
* drotr32 was correctly implemented with a uimm5 but the tests expected
'52' to be valid.
* li/la were implemented with a uimm5 instead of simm32. simm32 isn't
completely correct either but I'll fix that when I get to simm32.
A notable omission are some of the shift instructions. Several of these
have been implemented using a single uimm6 instruction (rather than two
uimm5 instructions and a CodeGen-only uimm6 pseudo). These will be updated
in the uimm6 patch.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D14712
llvm-svn: 254164
The patch in http://reviews.llvm.org/D13745 is broken into four parts:
1. New interfaces without functional changes.
2. Use new interfaces in SelectionDAG, while in other passes treat probabilities
as weights.
3. Use new interfaces in all other passes.
4. Remove old interfaces.
This the second patch above. In this patch SelectionDAG starts to use
probability-based interfaces in MBB to add successors but other MC passes are
still using weight-based interfaces. Therefore, we need to maintain correct
weight list in MBB even when probability-based interfaces are used. This is
done by updating weight list in probability-based interfaces by treating the
numerator of probabilities as weights. This change affects many test cases
that check successor weight values. I will update those test cases once this
patch looks good to you.
Differential revision: http://reviews.llvm.org/D14361
llvm-svn: 253965
Note, this was reviewed (and more details are in) http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
These intrinsics currently have an explicit alignment argument which is
required to be a constant integer. It represents the alignment of the
source and dest, and so must be the minimum of those.
This change allows source and dest to each have their own alignments
by using the alignment attribute on their arguments. The alignment
argument itself is removed.
There are a few places in the code for which the code needs to be
checked by an expert as to whether using only src/dest alignment is
safe. For those places, they currently take the minimum of src/dest
alignments which matches the current behaviour.
For example, code which used to read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 500, i32 8, i1 false)
will now read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 8 %dest, i8* align 8 %src, i32 500, i1 false)
For out of tree owners, I was able to strip alignment from calls using sed by replacing:
(call.*llvm\.memset.*)i32\ [0-9]*\,\ i1 false\)
with:
$1i1 false)
and similarly for memmove and memcpy.
I then added back in alignment to test cases which needed it.
A similar commit will be made to clang which actually has many differences in alignment as now
IRBuilder can generate different source/dest alignments on calls.
In IRBuilder itself, a new argument was added. Instead of calling:
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, /* isVolatile */ false)
you now call
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, SrcAlign, /* isVolatile */ false)
There is a temporary class (IntegerAlignment) which takes the source alignment and rejects
implicit conversion from bool. This is to prevent isVolatile here from passing its default
parameter to the source alignment.
Note, changes in future can now be made to codegen. I didn't change anything here, but this
change should enable better memcpy code sequences.
Reviewed by Hal Finkel.
llvm-svn: 253511
If a section is rw, it is irrelevant if the dynamic linker will write to
it or not.
It looks like llvm implemented this because gcc was doing it. It looks
like gcc implemented this in the hope that it would put all the
relocated items close together and speed up the dynamic linker.
There are two problem with this:
* It doesn't work. Both bfd and gold will map .data.rel to .data and
concatenate the input sections in the order they are seen.
* If we want a feature like that, it can be implemented directly in the
linker since it knowns where the dynamic relocations are.
llvm-svn: 253436
Currently, if the assembler encounters an error after parsing (such as an
out-of-range fixup), it reports this as a fatal error, and so stops after the
first error. However, for most of these there is an obvious way to recover
after emitting the error, such as emitting the fixup with a value of zero. This
means that we can report on all of the errors in a file, not just the first
one. MCContext::reportError records the fact that an error was encountered, so
we won't actually emit an object file with the incorrect contents.
Differential Revision: http://reviews.llvm.org/D14717
llvm-svn: 253328
MCRelaxableFragment previously kept a copy of MCSubtargetInfo and
MCInst to enable re-encoding the MCInst later during relaxation. A copy
of MCSubtargetInfo (instead of a reference or pointer) was needed
because the feature bits could be modified by the parser.
This commit replaces the MCSubtargetInfo copy in MCRelaxableFragment
with a constant reference to MCSubtargetInfo. The copies of
MCSubtargetInfo are kept in MCContext, and the target parsers are now
responsible for asking MCContext to provide a copy whenever the feature
bits of MCSubtargetInfo have to be toggled.
With this patch, I saw a 4% reduction in peak memory usage when I
compiled verify-uselistorder.lto.bc using llc.
rdar://problem/21736951
Differential Revision: http://reviews.llvm.org/D14346
llvm-svn: 253127
MCSubtargetInfo in the subclasses into MCTargetAsmParser and define a
member function getSTI.
This is done in preparation for making changes to shrink the size of
MCRelaxableFragment. (see http://reviews.llvm.org/D14346).
llvm-svn: 253124
Summary:
Support for R_MIPS_NONE allows us to parse MIPS16's usage of .reloc.
R_MIPS_32 was included to be able to better test the directive.
Targets can add their relocations by overriding MCAsmBackend::getFixupKind().
Subscribers: grosbach, rafael, majnemer, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13659
llvm-svn: 252888
Summary:
This patch overrides TargetFrameLowering::getFrameIndexReference() in order to
specify the correct register when the function needs dynamic stack realignment.
The values returned from this function are used in order to create DW_AT_locations
for DWARF info. These locations would use the wrong registers as it's been
reported in PR25028.
Reviewers: dsanders
Subscribers: dean, llvm-commits
Differential Revision: http://reviews.llvm.org/D13511
llvm-svn: 252882
MIPS32 has instructions for efficient count-leading/trailing-zeros, so this should be
considered a cheap operation (and therefore fair game for speculation) for any MIPS32
implementation.
The net result of allowing this speculation for the regression tests in this patch is
that we get this code:
ctlz:
jr $ra
clz $2, $4
cttz:
addiu $1, $4, -1
not $2, $4
and $1, $2, $1
clz $1, $1
addiu $2, $zero, 32
jr $ra
subu $2, $2, $1
Instead of:
ctlz:
beqz $4, $BB0_2
addiu $2, $zero, 32
clz $2, $4
$BB0_2:
jr $ra
nop
cttz:
beqz $4, $BB1_2
addiu $2, $zero, 32
addiu $1, $4, -1
not $2, $4
and $1, $2, $1
clz $1, $1
addiu $2, $zero, 32
subu $2, $2, $1
$BB1_2:
jr $ra
nop
See D14469 for the larger motivation.
Differential Revision: http://reviews.llvm.org/D14500
llvm-svn: 252755
Summary:
The CLR's personality routine passes these in rdx/edx, not rax/eax.
Make getExceptionPointerRegister a virtual method parameterized by
personality function to allow making this distinction.
Similarly make getExceptionSelectorRegister a virtual method parameterized
by personality function, for symmetry.
Reviewers: pgavlin, majnemer, rnk
Subscribers: jyknight, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D14344
llvm-svn: 252383
Summary:
The bug was that the sldi instructions have immediate widths dependant on
their element size. So sldi.d has a 1-bit immediate and sldi.b has a 4-bit
immediate. All of these were using 4-bit immediates previously.
Reviewers: vkalintiris
Subscribers: llvm-commits, atanasyan, dsanders
Differential Revision: http://reviews.llvm.org/D14018
llvm-svn: 252297
Summary:
The bug was that the MIPS32R6/MIPS64R6/microMIPS32R6 versions of LSA and DLSA
(unlike the MSA version) failed to account for the off-by-one encoding of the
immediate. The range is actually 1..4 rather than 0..3.
Reviewers: vkalintiris
Subscribers: atanasyan, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D14015
llvm-svn: 252295
Summary:
Without these patterns we would generate a complete LL/SC sequence.
This would be problematic for memory regions marked as WRITE-only or
READ-only, as the instructions LL/SC would read/write to the protected
memory regions correspondingly.
Reviewers: dsanders
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D14397
llvm-svn: 252293
Summary:
This review is related to another review request http://reviews.llvm.org/D11268, does the same and merely fixes a couple of issues with it.
D11268 is quite old and has merge conflicts against the current trunk.
This request
- rebases D11268 onto the new trunk;
- resolves the merge conflicts;
- fixes the prologue_end tests, which do not pass due to the subprogram definitions not marked as distinct.
Reviewers: echristo, rengolin, kubabrecka
Subscribers: aemerson, rengolin, jyknight, dsanders, llvm-commits, asl
Differential Revision: http://reviews.llvm.org/D14338
llvm-svn: 252177
Summary:
This commit resolves wrong opcodes for ll and sc instructions for r6 architecutres, which were generated in method MipsTargetLowering::emitAtomicBinary.
Author: Jelena.Losic
Reviewers: dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13593
llvm-svn: 251629
Summary:
The microMIPS register class GPRMM16 does not contain the $zero register.
However, MipsSEDAGToDAGISel::replaceUsesWithZeroReg() would replace uses
of the $dst register:
[d]addiu, $dst, $zero, 0
with the $zero register, without checking for membership in the register
class of the target machine operand.
Reviewers: dsanders
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13984
llvm-svn: 251622
Summary:
Previously we maintained two separate switch statements that had to be kept in
sync. This patch merges them into a single switch.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D14012
llvm-svn: 251369
Instead of XFAIL-ing the tests with the wrong usage of the "interrupt"
attribute, we should check that we emit the correct error messages to
the user.
llvm-svn: 251295
Summary:
This patch adds support for using the "interrupt" attribute on Mips
for interrupt handling functions. At this time only mips32r2+ with the
o32 ABI with the static relocation model is supported. Unsupported
configurations will be rejected
Patch by Simon Dardis (+ clang-format & some trivial changes to follow the
LLVM coding standards by me).
Reviewers: mpf, dsanders
Subscribers: dsanders, vkalintiris, llvm-commits
Differential Revision: http://reviews.llvm.org/D10768
llvm-svn: 251286
Summary:
Previously, we were inserting an InlineAsm statement for each line of the
inline assembly. This works for GAS but it triggers prologue/epilogue
emission when IAS is in use. This caused:
.set noreorder
.cpload $25
to be emitted as:
.set push
.set reorder
.set noreorder
.set pop
.set push
.set reorder
.cpload $25
.set pop
which led to assembler errors and caused the test to fail.
The whitespace-after-comma changes included in this patch are necessary to
match the output when IAS is in use.
Reviewers: vkalintiris
Subscribers: rkotler, llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13653
llvm-svn: 250895
Summary:
The forwards compatibility strategy employed by MIPS is to consider registers
to be infinitely sign-extended. Then on ISA's with a wider register, the result
of existing instructions are sign-extended to register width and zero-extended
counterparts are added. copy_u.w on MSA32 and copy_u.w on MSA64 violate this
strategy and we have therefore corrected the MSA specs to fix this.
We still keep track of sign/zero-extension during legalization but we now
match copy_s.[wd] where required.
No change required to clang since __builtin_msa_copy_u_[wd] will map to
copy_s.[wd] where appropriate for the target.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13472
llvm-svn: 250887
Summary:
This macro is needed to prevent test/CodeGen/Mips/2008-08-01-AsmInline.ll from
failing after the integrated assembler is enabled by default.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13654
llvm-svn: 250414
Summary:
The -mcpu=mips16 option caused the Integrated Assembler to crash because
it couldn't figure out the architecture revision number to write to the
.MIPS.abiflags section. This CPU definition has been removed because, like
microMIPS, MIPS16 is an ASE to a base architecture.
Reviewers: vkalintiris
Subscribers: rkotler, llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13656
llvm-svn: 250407
Summary:
This removes unnecessary instructions when extracting from an undefined register
and also fixes a crash for O32 when passing undef to a double argument in
held in integer registers.
Reviewers: vkalintiris
Subscribers: llvm-commits, zoran.jovanovic, petarj
Differential Revision: http://reviews.llvm.org/D13467
llvm-svn: 250039
Summary:
This fixes 7 tests during fast LLVM test-suite run:
* MultiSource/Benchmarks/McCat/18-imp/imp
* MultiSource/Applications/oggenc/oggenc
* MultiSource/Benchmarks/MallocBench/gs/gs
* MultiSource/Benchmarks/MiBench/automotive-susan/automotive-susan
* MultiSource/Benchmarks/VersaBench/beamformer/beamformer
* MultiSource/Benchmarks/MiBench/consumer-lame/consumer-lame
* MultiSource/Benchmarks/Bullet/bullet
Error message was in the form of:
fatal error: error in backend: Cannot select: 0x95c3288: f32 = fsqrt 0x95c0190 [ORD=9] [ID=18]
0x95c0190: f32 = fadd 0x95bef30, 0x95c4d00 [ORD=8] [ID=17]
0x95bef30: f32 = fmul 0x95c4988, 0x95c4988 [ORD=5] [ID=16]
...
There was problem with selecting sqrt instruction in LLVM backend.
To fix the issue changes are made in TableGen definition for sqrt instruction in MipsInstrFPU.td and new test file sqrt.ll is added to LLVM regression tests.
Patch by Zlatko Buljan
Reviewers: zoran.jovanovic, hvarga, dsanders
Subscribers: llvm-commits, petarj
Differential Revision: http://reviews.llvm.org/D13235
llvm-svn: 249416
Summary:
An instruction like "(d)la $5, symbol+8" previously would have crashed the
assembler as it contains an expression. This is now fixed.
A few tests cases have also been changed to reflect these changes, however
these should only be syntax changes. Some new test cases have also been
added.
Patch by Scott Egerton.
Reviewers: vkalintiris, dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12760
llvm-svn: 249311
This extends the work done in r233995 so that now getFragment (in addition to
getSection) also works for variable symbols.
With that the existing logic to decide if a-b can be computed works even if
a or b are variables. Given that, the expression evaluation can avoid expanding
variables as aggressively and that in turn lets the relocation code see the
original variable.
In order for this to work with the asm streamer, there is now a dummy fragment
per section. It is used to assign a section to a symbol when no other fragment
exists.
This patch is a joint work by Maxim Ostapenko andy myself.
llvm-svn: 249303
Summary:
The P5600 is an out-of-order, superscalar implementation of the MIPS32R5
architecture.
The scheduler has a few missing details (see the 'Tricky Instructions'
section and some quirks of the P5600 are deliberately omitted due to
implementation difficulty and low chance of significant benefit (e.g. the
predicate on P5600WriteEitherALU). However, testing on SingleSource is
showing significant performance benefits on some apps (seven in the 10-30%
range) and only one significant regression (12%) when
-pre-RA-sched=linearize is given. Without -pre-RA-sched=linearize the
results are more variable. Some do even better (up to 55% improvement) but
increased numbers of copies are slowing others down (up to 12%).
Overall, the scheduler as it currently stands is a 2.4% win with
-pre-RA-sched=linearize and a 2.7% win without -pre-RA-sched=linearize.
I'm sure we can improve on this further.
For completeness, the FPGA this was tested on shows some failures with and
without the P5600 scheduler. These appear to be scheduling related since
the two test runs have fairly different sets of failing tests even after
accounting for other factors (e.g. spurious connection failures) however
it's not P5600 specific since we also get some for the generic scheduler.
Reviewers: vkalintiris
Subscribers: mpf, llvm-commits, atrick, vkalintiris
Differential Revision: http://reviews.llvm.org/D12193
llvm-svn: 248725
Summary:
Almost no functional change since the InstrItinData's have been duplicated.
The one functional change is to remove IIBranch from the MSA branches. The
classes will be assigned to the MSA instructions as part of implementing
the P5600 scheduler.
II_IndirectBranchPseudo and II_ReturnPseudo can probably be removed. I've
preserved the itinerary information for the corresponding pseudo
instructions to avoid making a functional change to these pseudos in
this patch.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12189
llvm-svn: 248273
Summary:
The only instructions left in IIAlu are MIPS16 specific. We're not
implementing a MIPS16 scheduler at this time so rename the class to make it
obvious that they are MIPS16 instructions.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12188
llvm-svn: 248267
Summary:
Based on a patch by David Chisnall. I've modified the original patch as follows:
* Moved the expansion to the TargetStreamers so that the directive isn't
expanded when emitting assembly.
* Fixed an operand order bug.
* Changed the move instructions from DADDu to OR to match recent changes to GAS.
Reviewers: vkalintiris
Subscribers: llvm-commits, emaste, seanbruno, theraven
Differential Revision: http://reviews.llvm.org/D13017
llvm-svn: 248258
Summary:
No functional change since no InstrItinData is provided.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12190
llvm-svn: 248257
Summary:
Also tightened up the test and made a trivial fix to prevent double-newline
after emitting .cpsetup directives.
Reviewers: vkalintiris
Subscribers: seanbruno, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D12956
llvm-svn: 248143
Summary:
Some values of 'reglist' are reserved and cause the disassembler to read past
the end of the Regs array. Treat lwm32's containing reserved values as invalid
instructions.
Reviewers: zoran.jovanovic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12959
llvm-svn: 247990
Summary:
This assembler directive is used in O32 PIC to restore the current function's $gp after executing JAL's. The $gp is first stored on the stack at a user-specified offset.
It has the following format: ".cprestore 8" (where 8 is the offset).
This fixes llvm.org/PR20967.
Patch by Toma Tabacu.
Reviewers: seanbruno, tomatabacu
Subscribers: brooks, seanbruno, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D6267
llvm-svn: 247897
After D10403, we had FMF in the DAG but disabled by default. Nick reported no crashing errors after some stress testing,
so I enabled them at r243687. However, Escha soon notified us of a bug not covered by any in-tree regression tests:
if we don't propagate the flags, we may fail to CSE DAG nodes because differing FMF causes them to not match. There is
one test case in this patch to prove that point.
This patch hopes to fix or leave a 'TODO' for all of the in-tree places where we create nodes that are FMF-capable. I
did this by putting an assert in SelectionDAG.getNode() to find any FMF-capable node that was being created without FMF
( D11807 ). I then ran all regression tests and test-suite and confirmed that everything passes.
This patch exposes remaining work to get DAG FMF to be fully functional: (1) add the flags to non-binary nodes such as
FCMP, FMA and FNEG; (2) add the flags to intrinsics; (3) use the flags as conditions for transforms rather than the
current global settings.
Differential Revision: http://reviews.llvm.org/D12095
llvm-svn: 247815
Summary:
This is the first patch in the series to migrate Triple's (which are ambiguous)
to TargetTuple's (which aren't).
For the moment, TargetTuple simply passes all requests to the Triple object it
holds. Once it has replaced Triple, it will start to implement the interface in
a more suitable way.
This change makes some changes to the public C++ API. In particular,
InitMCSubtargetInfo(), createMCRelocationInfo(), and createMCSymbolizer()
now take TargetTuples instead of Triples. The other public C++ API's have
been left as-is for the moment to reduce patch size.
This commit also contains a trivial patch to clang to account for the C++ API
change. Thanks go to Pavel Labath for fixing LLDB for me.
Reviewers: rengolin
Subscribers: jyknight, dschuff, arsenm, rampitec, danalbert, srhines, javed.absar, dsanders, echristo, emaste, jholewinski, tberghammer, ted, jfb, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10969
llvm-svn: 247692
Summary:
This is the first patch in the series to migrate Triple's (which are ambiguous)
to TargetTuple's (which aren't).
For the moment, TargetTuple simply passes all requests to the Triple object it
holds. Once it has replaced Triple, it will start to implement the interface in
a more suitable way.
This change makes some changes to the public C++ API. In particular,
InitMCSubtargetInfo(), createMCRelocationInfo(), and createMCSymbolizer()
now take TargetTuples instead of Triples. The other public C++ API's have
been left as-is for the moment to reduce patch size.
This commit also contains a trivial patch to clang to account for the C++ API
change.
Reviewers: rengolin
Subscribers: jyknight, dschuff, arsenm, rampitec, danalbert, srhines, javed.absar, dsanders, echristo, emaste, jholewinski, tberghammer, ted, jfb, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10969
llvm-svn: 247683
Summary:
Added support for the following instructions:
CACHEE, LBE, LBUE, LHE, LHUE, LWE, LLE, LWLE, LWRE, PREFE,
SBE, SHE, SWE, SCE, SWLE, SWRE, TLBINV, TLBINVF
This required adding some infrastructure for the EVA ASE.
Patch by Scott Egerton.
Reviewers: vkalintiris, dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11139
llvm-svn: 247669
Summary:
These operands had the same purpose, however the MipsMemSimm9GPRAsmOperand
operand was only for micromips32r6 and the MipsMemSimm9AsmOperand did not
have a ParserMatchClass.
Patch by Scott Egerton
Reviewers: vkalintiris, dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12730
llvm-svn: 247573
The MipsTargetELFStreamer can receive ABI info from many sources. For example,
from the MipsAsmParser instance. Lifetime of the MipsAsmParser can be shorter
than MipsTargetELFStreamer's lifetime. In that case we get a dangling pointer
to MipsABIInfo.
Differential Revision: http://reviews.llvm.org/D12805
llvm-svn: 247546
Summary: This fixes a variety of typos in docs, code and headers.
Subscribers: jholewinski, sanjoy, arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D12626
llvm-svn: 247495
With subregister liveness enabled we can detect the case where only
parts of a register are live in, this is expressed as a 32bit lanemask.
The current code only keeps registers in the live-in list and therefore
enumerated all subregisters affected by the lanemask. This turned out to
be too conservative as the subregister may also cover additional parts
of the lanemask which are not live. Expressing a given lanemask by
enumerating a minimum set of subregisters is computationally expensive
so the best solution is to simply change the live-in list to store the
lanemasks as well. This will reduce memory usage for targets using
subregister liveness and slightly increase it for other targets
Differential Revision: http://reviews.llvm.org/D12442
llvm-svn: 247171
Summary: And define them to have noop casts with address spaces 0-255.
Reviewers: pekka.jaaskelainen
Subscribers: pekka.jaaskelainen, llvm-commits
Differential Revision: http://reviews.llvm.org/D12678
llvm-svn: 246990
This has been causing the prologue_end to be incorrectly positioned.
Patch by Vladimir Radosavljevic.
Differential Revision: http://reviews.llvm.org/D11293
llvm-svn: 246309
We can now run 32-bit programs with empty catch bodies. The next step
is to change PEI so that we get funclet prologues and epilogues.
llvm-svn: 246235
Summary: This is the correct way to handle JAL instructions when PIC is enabled.
Patch by Toma Tabacu
Reviewers: seanbruno, tomatabacu
Subscribers: brooks, seanbruno, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D6231
llvm-svn: 245305
Summary:
This information is needed to decide whether we do the PIC-only JAL expansions or not. It's also needed for an upcoming patch which implements the .cprestore assembler directive (which can only be used effectively in PIC mode).
By making this information available to the MipsAsmParser, we will know when to insert the instructions mandated by the .cprestore assembler directive and we will be able to give some useful warnings when we encounter a potential misuse of this directive.
Patch by Toma Tabacu
Reviewers: dsanders, seanbruno
Subscribers: brooks, seanbruno, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D5626
llvm-svn: 245291
Summary: It is the same as LA, except that it can also load 64-bit addresses and it only works on 64-bit MIPS architectures.
Reviewers: tomatabacu, seanbruno, vkalintiris
Subscribers: brooks, seanbruno, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D9524
llvm-svn: 245208
This commit transforms the mips-specific 'MipsCallEntry' subclass of the
'PseudoSourceValue' class into two, target-independent subclasses named
'GlobalValuePseudoSourceValue' and 'ExternalSymbolPseudoSourceValue'.
This change makes it easier to serialize the pseudo source values by removing
target-specific pseudo source values.
Reviewers: Akira Hatanaka
llvm-svn: 244698
This commit removes the global manager variable which is responsible for
storing and allocating pseudo source values and instead it introduces a new
manager class named 'PseudoSourceValueManager'. Machine functions now own an
instance of the pseudo source value manager class.
This commit also modifies the 'get...' methods in the 'MachinePointerInfo'
class to construct pseudo source values using the instance of the pseudo
source value manager object from the machine function.
This commit updates calls to the 'get...' methods from the 'MachinePointerInfo'
class in a lot of different files because those calls now need to pass in a
reference to a machine function to those methods.
This change will make it easier to serialize pseudo source values as it will
enable me to transform the mips specific MipsCallEntry PseudoSourceValue
subclass into two target independent subclasses.
Reviewers: Akira Hatanaka
llvm-svn: 244693
This commit introduces a new enumerator named 'PSVKind' in the
'PseudoSourceValue' class. This enumerator is now used to distinguish between
the various kinds of pseudo source values.
This change is done in preparation for the changes to the pseudo source value
object management and to the PseudoSourceValue's class hierarchy - the next two
PseudoSourceValue commits will get rid of the global variable that manages the
pseudo source values and the mips specific MipsCallEntry subclass.
Reviewers: Akira Hatanaka
llvm-svn: 244687
Summary:
This patch remaps the assembly idiom 'move' to 'or' instead of 'daddu' or
'addu'. The use of addu/daddu instead of or as move was highlighted as a
performance issue during the analysis of a recent 64bit design. Originally
move was encoded as 'or' by binutils but was changed for the r10k cpu family
due to their pipeline which had 2 arithmetic units and a single logical unit,
and so could issue multiple (d)addu based moves at the same time but only 1
logical move.
This patch preserves the disassembly behaviour so that disassembling a old style
(d)addu move still appears as move, but assembling move always gives an or
Patch by Simon Dardis.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11796
llvm-svn: 244579
Summary:
Previously, we would check whether the target is supported or not, only in
fastSelectInstruction(). This means that 64-bit targets could use FastISel too.
We fix this by checking every overridden method of the FastISel class and
by falling back to SelectionDAG if the target isn't supported. This change
should have been committed along with r243638, but somehow I missed it.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11755
llvm-svn: 243986
It introduced two regressions on 64-bit big-endian targets running under N32
(MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4, and
MultiSource/Applications/kimwitu++/kc) The issue is that on 64-bit targets
comparisons such as BEQ compare the whole GPR64 but incorrectly tell the
instruction selector that they operate on GPR32's. This leads to the
elimination of i32->i64 extensions that are actually required by
comparisons to work correctly.
There's currently a patch under review that fixes this problem.
llvm-svn: 243984
Summary:
This hidden option would disable code generation through FastISel by
default. It was removed from the available options and from the
Fast-ISel tests that required it in order to run the tests.
Reviewers: dsanders
Subscribers: qcolombet, llvm-commits
Differential Revision: http://reviews.llvm.org/D11610
llvm-svn: 243638
Summary:
Previously, we would sign-extend non-boolean negative constants and
zero-extend otherwise. This was problematic for PHI instructions with
negative values that had a type with bitwidth less than that of the
register used for materialization.
More specifically, ComputePHILiveOutRegInfo() assumes the constants
present in a PHI node are zero extended in their container and
afterwards deduces the known bits.
For example, previously we would materialize an i16 -4 with the
following instruction:
addiu $r, $zero, -4
The register would end-up with the 32-bit 2's complement representation
of -4. However, ComputePHILiveOutRegInfo() would generate a constant
with the upper 16-bits set to zero. The SelectionDAG builder would use
that information to generate an AssertZero node that would remove any
subsequent trunc & zero_extend nodes.
In theory, we should modify ComputePHILiveOutRegInfo() to consult
target-specific hooks about the way they prefer to materialize the
given constants. However, git-blame reports that this specific code
has not been touched since 2011 and it seems to be working well for every
target so far.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11592
llvm-svn: 243636
Summary:
Currently, we support only the MIPS O32 ABI calling convention for call
lowering. With this change we avoid using the O32 calling convetion for
lowering calls marked as using the fast calling convention.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11515
llvm-svn: 243485
Summary:
Generate correct code for the select instruction by zero-extending
it's boolean/condition operand to GPR-width. This is necessary because
the conditional-move instructions operate on the whole register.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11506
llvm-svn: 243469
The 'common' section TLS is not implemented.
Current C/C++ TLS variables are not placed in common section.
DWARF debug info to get the address of TLS variables is not generated yet.
clang and driver changes in http://reviews.llvm.org/D10524
Added -femulated-tls flag to select the emulated TLS model,
which will be used for old targets like Android that do not
support ELF TLS models.
Added TargetLowering::LowerToTLSEmulatedModel as a target-independent
function to convert a SDNode of TLS variable address to a function call
to __emutls_get_address.
Added into lib/Target/*/*ISelLowering.cpp to call LowerToTLSEmulatedModel
for TLSModel::Emulated. Although all targets supporting ELF TLS models are
enhanced, emulated TLS model has been tested only for Android ELF targets.
Modified AsmPrinter.cpp to print the emutls_v.* and emutls_t.* variables for
emulated TLS variables.
Modified DwarfCompileUnit.cpp to skip some DIE for emulated TLS variabls.
TODO: Add proper DIE for emulated TLS variables.
Added new unit tests with emulated TLS.
Differential Revision: http://reviews.llvm.org/D10522
llvm-svn: 243438
This patch does the following:
* Fix FIXME on `needsStackRealignment`: it is now shared between multiple targets, implemented in `TargetRegisterInfo`, and isn't `virtual` anymore. This will break out-of-tree targets, silently if they used `virtual` and with a build error if they used `override`.
* Factor out `canRealignStack` as a `virtual` function on `TargetRegisterInfo`, by default only looks for the `no-realign-stack` function attribute.
Multiple targets duplicated the same `needsStackRealignment` code:
- Aarch64.
- ARM.
- Mips almost: had extra `DEBUG` diagnostic, which the default implementation now has.
- PowerPC.
- WebAssembly.
- x86 almost: has an extra `-force-align-stack` option, which the default implementation now has.
The default implementation of `needsStackRealignment` used to just return `false`. My current patch changes the behavior by simply using the above shared behavior. This affects:
- AMDGPU
- BPF
- CppBackend
- MSP430
- NVPTX
- Sparc
- SystemZ
- XCore
- Out-of-tree targets
This is a breaking change! `make check` passes.
The only implementation of the `virtual` function (besides the slight different in x86) was Hexagon (which did `MF.getFrameInfo()->getMaxAlignment() > 8`), and potentially some out-of-tree targets. Hexagon now uses the default implementation.
`needsStackRealignment` was being overwritten in `<Target>GenRegisterInfo.inc`, to return `false` as the default also did. That was odd and is now gone.
Reviewers: sunfish
Subscribers: aemerson, llvm-commits, jfb
Differential Revision: http://reviews.llvm.org/D11160
llvm-svn: 242727
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
This patch is quite boring overall, except for some uglyness in
ASMPrinter which has a getDataLayout function but has some clients
that use it without a Module (llmv-dsymutil, llvm-dwarfdump), so
some methods are taking a DataLayout as parameter.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11090
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 242386
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11079
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 242385
This changes TargetFrameLowering::processFunctionBeforeCalleeSavedScan():
- Rename the function to determineCalleeSaves()
- Pass a bitset of callee saved registers by reference, thus avoiding
the function-global PhysRegUsed bitset in MachineRegisterInfo.
- Without PhysRegUsed the implementation is fine tuned to not save
physcial registers which are only read but never modified.
Related to rdar://21539507
Differential Revision: http://reviews.llvm.org/D10909
llvm-svn: 242165
Summary:
- Signed 16-bit should have priority over unsigned.
- For la, unsigned 16-bit must use ori+addu rather than directly use ori.
- Correct tests on 32-bit immediates with 64-bit predicates by
sign-extending the immediate beforehand. For example, isInt<16>(0xffff8000)
should be true and use addiu.
Also split li/la testing into separate files due to their size.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10967
llvm-svn: 242139
Force all creators of `MCSubtargetInfo` to immediately initialize it,
merging the default constructor and the initializer into an initializing
constructor. Besides cleaning up the code a little, this makes it clear
that the initializer is never called again later.
Out-of-tree backends need a trivial change: instead of calling:
auto *X = new MCSubtargetInfo();
InitXYZMCSubtargetInfo(X, ...);
return X;
they should call:
return createXYZMCSubtargetInfoImpl(...);
There's no real functionality change here.
llvm-svn: 241957
This patch allows the read_register and write_register intrinsics to
read/write the RBP/EBP registers on X86 iff the targeted register is
the frame pointer for the containing function.
Differential Revision: http://reviews.llvm.org/D10977
llvm-svn: 241827
Summary:
Remove empty subclass in the process.
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren, ted
Differential Revision: http://reviews.llvm.org/D11045
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241780
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11042
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241779
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11040
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241778
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11037
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241776
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, ted, yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11028
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241775
DataLayout is no longer optional. It was initialized with or without
a DataLayout, and the DataLayout when supplied could have been the
one from the TargetMachine.
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11021
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241774
Summary:
Avoid using the TargetMachine owned DataLayout and use the Module owned
one instead. This requires passing the DataLayout up the stack to
ComputeValueVTs().
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11019
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241773
Summary:
This concludes the patch series to eliminate StringRef forms of GNU triples
from the internals of LLVM that began in r239036.
At this point, the StringRef-form of GNU Triples should only be used in the
public API (including IR serialization) and a couple objects that directly
interact with the API (most notably the Module class). The next step is to
replace these Triple objects with the TargetTuple object that will represent
our authoratative/unambiguous internal equivalent to GNU Triples.
Reviewers: rengolin
Subscribers: llvm-commits, jholewinski, ted, rengolin
Differential Revision: http://reviews.llvm.org/D10962
llvm-svn: 241472
There is some functional change here because it changes target code from
atoi(3) to StringRef::getAsInteger which has error checking. For valid
constraints there should be no difference.
llvm-svn: 241411
These directives are used to set the default value of the SoftFloat feature.
They have the same effect as setting -m{soft, hard}-float from the command line.
Differential Revision: http://reviews.llvm.org/D9073
llvm-svn: 241066
represented by uint64_t, this patch replaces these
usages with the FeatureBitset (std::bitset) type.
Differential Revision: http://reviews.llvm.org/D10542
llvm-svn: 241058
Summary:
Previously it (incorrectly) used GPR's.
Patch by Simon Dardis. A couple small corrections by myself.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10567
llvm-svn: 240883
Summary:
This only adds support for ULW of an immediate address with/without a source register.
It does not include support for ULW of the address of a symbol.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9663
llvm-svn: 240782
Summary:
Simplify emitDirectiveModuleFP() by having it just print the current information
from MipsABIFlagsSection and doing an updateABIInfo() before such calls.
This prevents us from forgetting to update the STI.FeatureBits,
because updateABIInfo() uses those to update the MipsABIFlagsSection object,
and also makes sure we use the update mechanism from MipsABIFlagsSection.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits, mpf
Differential Revision: http://reviews.llvm.org/D10642
llvm-svn: 240637
Summary:
We can simplify emitDirectiveModuleOddSPReg() by having it print the current OddSPReg information
from MipsABIFlagsSection and doing an updateABIInfo() before such calls.
This prevents us from forgetting to update the STI.FeatureBits, because updateABIInfo() uses those to update the MipsABIFlagsSection object,
and also makes sure we use the update mechanism from MipsABIFlagsSection.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits, mpf
Differential Revision: http://reviews.llvm.org/D10641
llvm-svn: 240630
Summary:
In an expression such as "(((a+b)+c)+d)", parseParenExpression() would only parse the "a+b)+c", which would result in an error later on in the parser.
This means that we can only parse one level of inner parentheses.
In order to fix this, I added a new function called parseParenExprOfDepth(), which parses a specified number of trailing parenthesis expressions
(except for the outermost parenthesis), and changed MipsAsmParser to use it in parseMemOffset instead of parseParenExpression().
Reviewers: dsanders, rafael
Reviewed By: dsanders, rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9742
llvm-svn: 240625
Summary:
This only adds support for ULHU of an immediate address with/without a source register.
It does not include support for ULHU of the address of a symbol.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9671
llvm-svn: 240410
Summary: This isn't used right now, but it will be in some upcoming changes.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10568
llvm-svn: 240407
So far, LLVM has not emitted correct addend for N64 and N32 ABI. This patch
fixes that. It also removes fixup from MCJIT for R_MIPS_PC16 relocation.
Patch by Vladimir Radosavljevic.
Differential Revision: http://reviews.llvm.org/D10565
llvm-svn: 240404
Summary: For the sake of consistency and to make some upcoming changes a little less noisy.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10639
llvm-svn: 240398
The summary is that it moves the mangling earlier and replaces a few
calls to .addExternalSymbol with addSym.
I originally wanted to replace all the uses of addExternalSymbol with
addSym, but noticed it was a lot of work and doesn't need to be done
all at once.
llvm-svn: 240395
Summary: In this case, we're supposed to load the immediate in AT and then ADDu it with the source register and put it in the destination register.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9367
llvm-svn: 240278
Matthias Braun