Remove remaining implicit conversions from MachineInstrBundleIterator to
MachineInstr* from the ARM backend. In most cases, I made them less attractive
by preferring MachineInstr& or using a ranged-based for loop.
Once all the backends are fixed I'll make the operator explicit so that this
doesn't bitrot back.
llvm-svn: 274920
Windows on ARM uses a pure thumb-2 environment. This means that it can select a
high register when doing a __builtin_longjmp. We would use a tLDRi which would
truncate the register to a low register. Use a t2LDRi12 to get the full
register file access. Tweak the code to just load into PC, as that is an
interworking branch on all supported cores anyways.
llvm-svn: 274815
This is a follow-up for r273544.
The end goal is to get rid of the isSwift / isCortexXY / isWhatever methods.
This commit also removes a command line flag that isn't used in any of the tests:
check-vmlx-hazards. It can be replaced easily with the mattr mechanism, since
this is now a subtarget feature.
There is still some work left regarding FeatureExpandMLx. In the past MLx
expansion was enabled for subtargets with hasVFP2(), until r129775 [1] switched
from that to isCortexA9, without too much justification.
In spite of that, the code performing MLx expansion still contains calls to
isSwift/isLikeA9, although the results of those are pretty clear given that
we're only enabling it for the A9.
We should try to enable it for all targets that have FeatureHasVMLxHazards, as
it seems to be closely related to that behaviour, and if that is possible try to
clean up the MLx expansion pass from all calls to isWhatever. This will require
some performance testing, so it will be done in another patch.
[1] http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20110418/119725.html
Differential Revision: http://reviews.llvm.org/D21798
llvm-svn: 274742
This is a follow-up for r273544.
The end goal is to get rid of the isSwift / isCortexXY / isWhatever methods.
This commit also removes two command-line flags that weren't used in any of the
tests: widen-vmovs and swift-partial-update-clearance. The former may be easily
replaced with the mattr mechanism, but the latter may not (as it is a subtarget
property, and not a proper feature).
Differential Revision: http://reviews.llvm.org/D21797
llvm-svn: 274620
This is a follow-up for r273544 and r273853.
The end goal is to get rid of the isSwift / isCortexXY / isWhatever methods.
This commit also marks them as obsolete.
Differential Revision: http://reviews.llvm.org/D21796
llvm-svn: 274616
Not all code-paths set the relocation model to static for Windows. This
currently breaks on Windows ARM with `-mlong-calls` when built with clang.
Loosen the assertion to what it was previously. We would ideally ensure that
all the configuration sets Windows to static relocation model.
llvm-svn: 274570
The important thing I was missing was ensuring newly added constants were kept in topological order. Repositioning the node is correct if the constant is newly added (so it has no topological ordering) but wrong if it already existed - positioning it next in the worklist would break the topological ordering.
Original commit message:
[Thumb] Select a BIC instead of AND if the immediate can be encoded more optimally negated
If an immediate is only used in an AND node, it is possible that the immediate can be more optimally materialized when negated. If this is the case, we can negate the immediate and use a BIC instead;
int i(int a) {
return a & 0xfffffeec;
}
Used to produce:
ldr r1, [CONSTPOOL]
ands r0, r1
CONSTPOOL: 0xfffffeec
And now produces:
movs r1, #255
adds r1, #20 ; Less costly immediate generation
bics r0, r1
llvm-svn: 274543
We were using DAG->getConstant instead of DAG->getTargetConstant. This meant that we could inadvertently increase the use count of a constant if stars aligned, which it did in this testcase. Increasing the use count of the constant could cause ISel to fall over (because DAGToDAG lowering assumed the constant had only one use!)
Original commit message:
[Thumb] Select a BIC instead of AND if the immediate can be encoded more optimally negated
If an immediate is only used in an AND node, it is possible that the immediate can be more optimally materialized when negated. If this is the case, we can negate the immediate and use a BIC instead;
int i(int a) {
return a & 0xfffffeec;
}
Used to produce:
ldr r1, [CONSTPOOL]
ands r0, r1
CONSTPOOL: 0xfffffeec
And now produces:
movs r1, #255
adds r1, #20 ; Less costly immediate generation
bics r0, r1
llvm-svn: 274510
No functional changes. Just created wrapper classes around the 3
and 4 reg mult and mac instruction classes.
Differential Revision: http://reviews.llvm.org/D21549
llvm-svn: 274347
For the most part this simplifies all callers. There were two places in X86 that needed an explicit makeArrayRef to shorten a statically sized array.
llvm-svn: 274337
Change all the methods in LiveVariables that expect non-null
MachineInstr* to take MachineInstr& and update the call sites. This
clarifies the API, and designs away a class of iterator to pointer
implicit conversions.
llvm-svn: 274319
This is a mechanical change to make TargetLowering API take MachineInstr&
(instead of MachineInstr*), since the argument is expected to be a valid
MachineInstr. In one case, changed a parameter from MachineInstr* to
MachineBasicBlock::iterator, since it was used as an insertion point.
As a side effect, this removes a bunch of MachineInstr* to
MachineBasicBlock::iterator implicit conversions, a necessary step
toward fixing PR26753.
llvm-svn: 274287
This is mostly a mechanical change to make TargetInstrInfo API take
MachineInstr& (instead of MachineInstr* or MachineBasicBlock::iterator)
when the argument is expected to be a valid MachineInstr. This is a
general API improvement.
Although it would be possible to do this one function at a time, that
would demand a quadratic amount of churn since many of these functions
call each other. Instead I've done everything as a block and just
updated what was necessary.
This is mostly mechanical fixes: adding and removing `*` and `&`
operators. The only non-mechanical change is to split
ARMBaseInstrInfo::getOperandLatencyImpl out from
ARMBaseInstrInfo::getOperandLatency. Previously, the latter took a
`MachineInstr*` which it updated to the instruction bundle leader; now,
the latter calls the former either with the same `MachineInstr&` or the
bundle leader.
As a side effect, this removes a bunch of MachineInstr* to
MachineBasicBlock::iterator implicit conversions, a necessary step
toward fixing PR26753.
Note: I updated WebAssembly, Lanai, and AVR (despite being
off-by-default) since it turned out to be easy. I couldn't run tests
for AVR since llc doesn't link with it turned on.
llvm-svn: 274189
Summary:
This fixes bug: https://llvm.org/bugs/show_bug.cgi?id=28282
Currently the cost model of constant hoisting checks the bit width of the data type of the constants.
However, the actual immediate value is small enough and not need to be hoisted.
This patch checks for the actual bit width needed for the constant.
Reviewers: t.p.northover, rengolin
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D21668
llvm-svn: 274073
This is a follow-up for r273544.
The end goal is to get rid of the isSwift / isCortexXY / isWhatever methods.
Since the ARM backend seems to have quite a lot of calls to these methods, I
intend to submit 5-6 subtarget features at a time, instead of one big lump.
Differential Revision: http://reviews.llvm.org/D21685
llvm-svn: 273853
Summary:
SSAT saturates an integer, making sure that its value lies within
an interval [-k, k]. Since the constant is given to SSAT as the
number of bytes set to one, k + 1 must be a power of 2, otherwise
the optimization is not possible. Also, the select_cc must use <
and > respectively so that they define an interval.
Reviewers: mcrosier, jmolloy, rengolin
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D21372
llvm-svn: 273581
Move most of the initializations in ARMSubtarget::initializeEnvironment to
member initializers.
Change suggested by Matthias Braun (see http://reviews.llvm.org/D21432).
llvm-svn: 273556
This is a cleanup commit similar to r271555, but for ARM.
The end goal is to get rid of the isSwift / isCortexXY / isWhatever methods.
Since the ARM backend seems to have quite a lot of calls to these methods, I
intend to submit 5-6 subtarget features at a time, instead of one big lump.
Differential Revision: http://reviews.llvm.org/D21432
llvm-svn: 273544
The setCallee function will set the number of fixed arguments based
on the size of the argument list. The FixedArgs parameter was often
explicitly set to 0, leading to a lack of consistent value for non-
vararg functions.
Differential Revision: http://reviews.llvm.org/D20376
llvm-svn: 273403
TargetLowering and DAGToDAG are used to combine ADDC, ADDE and UMLAL
dags into UMAAL. Selection is split into the two phases because it
is easier to match the two patterns at those different times.
Differential Revision: http://http://reviews.llvm.org/D21461
llvm-svn: 273165
Reduces a bit of code duplication and clarify where we are interested
just on position independence and no the location of the symbol.
llvm-svn: 273164
Recommiting after fixing non-atomic insert to front of SmallVector in
MCAsmLexer.h
Add explicit Comment Token in Assembly Lexing for future support for
outputting explicit comments from inline assembly. As part of this,
CPPHash Directives are now explicitly distinguished from Hash line
comments in Lexer.
Line comments are recorded as EndOfStatement tokens, not Comment tokens
to simplify compatibility with current TargetParsers. This slightly
complicates comment output.
This remove all lexing tasks out of the parser, does minor cleanup
to remove extraneous newlines Asm Output, and some improvements white
space handling.
Reviewers: rtrieu, dwmw2, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20009
llvm-svn: 273007
Reapplying patch as it was reverted when it was first
committed because of an assertion failure when the
mrrc2 intrinsic was called in ARM mode. The failure
was happening because the instruction was being built
in ARMISelDAGToDAG.cpp and the tablegen description for
mrrc2 instruction doesn't allow you to use a predicate.
The ARM architecture manuals do say that mrrc2 in ARM
mode can be predicated with AL in assembly but this has
no effect on the encoding of the instruction as the top
4 bits will always be 1111 not 1110 which is the encoding
for the condition AL.
Differential Revision: http://reviews.llvm.org/D21408
llvm-svn: 272982
Duncan P. N. Exon Smith