- s/skipOnLinux/skipIfLinux/ to match style of every other decorator
- linkify bugizilla/PR numbers in comments
No intended change in functionality.
llvm-svn: 181913
- Enable TestFormatters.py: expressions with "new" work
- Enable TestChangeValueAPI.py: llvm.org/PR15039 fixed
- Disable expression_command/call-restarts due to llvm.org/PR15278
- Disable expression_command/call-throws due to ObjC test program
llvm-svn: 175287
- set auto-confirm to false when running TestExprs (avoid hang when using API)
- set prompt-on-quit to false in test helper (avoid timeout when using lldb CLI)
llvm-svn: 173485
controlled by the --unwind-on-error flag, and --ignore-breakpoint which separately controls behavior when a called
function hits a breakpoint. For breakpoints, we don't unwind, we either stop, or ignore the breakpoint, which makes
more sense.
Also make both these behaviors globally settable through "settings set".
Also handle the case where a breakpoint command calls code that ends up re-hitting the breakpoint. We were recursing
and crashing. Now we just stop without calling the second command.
<rdar://problem/12986644>
<rdar://problem/9119325>
llvm-svn: 172503
Adding useful formatting options to the expression (expr) command.
As a side effect of this change, the -d option now supports the same three-values enumeration that frame variables uses (run, don't run, none) instead of a boolean like it did previously
These options do not apply to print, p or po because these are aliased to not take any options.
In order to use them, use expression or expr.
llvm-svn: 171993
Cleaned up the option parsing code to always pass around the short options as integers. Previously we cast this down to "char" and lost some information. I recently added an assert that would detect duplicate short character options which was firing during the test suite.
This fix does the following:
- make sure all short options are treated as "int"
- make sure that short options can be non-printable values when a short option is not required or when an option group is mixed into many commands and a short option is not desired
- fix the help printing to "do the right thing" in all cases. Previously if there were duplicate short character options, it would just not emit help for the duplicates
- fix option parsing when there are duplicates to parse options correctly. Previously the option parsing, when done for an OptionGroup, would just start parsing options incorrectly by omitting table entries and it would end up setting the wrong option value
llvm-svn: 169189
- missing includes in cpp test programs
- mismatched dwarf/dsym test cases
- make "com.apple.main-thread" expected string conditional on darwin platform
llvm-svn: 168452
LLDB changes argv[0] when debugging a symlink. Now we have the notion of argv0 in the target settings:
target.arg0 (string) =
There is also the program argument that are separate from the first argument that have existed for a while:
target.run-args (arguments) =
When running "target create <exe>", we will place the untouched "<exe>" into target.arg0 to ensure when we run, we run with what the user typed. This has been added to the ProcessLaunchInfo and all other needed places so we always carry around the:
- resolved executable path
- argv0
- program args
Some systems may not support separating argv0 from the resolved executable path and the ProcessLaunchInfo needs to carry all of this information along so that each platform can make that decision.
llvm-svn: 166137
This feature allows us to group test cases into logical groups (categories), and to only run a subset of test cases based on these categories.
Each test-case can have a new method getCategories(self): which returns a list of strings that are the categories to which the test case belongs.
If a test-case does not provide its own categories, we will look for categories in the class that contains the test case.
If that fails too, the default implementation looks for a .category file, which contains a comma separated list of strings.
The test suite will recurse look for .categories up until the top level directory (which we guarantee will have an empty .category file).
The driver dotest.py has a new --category <foo> option, which can be repeated, and specifies which categories of tests you want to run.
(example: ./dotest.py --category objc --category expression)
All tests that do not belong to any specified category will be skipped. Other filtering options still exist and should not interfere with category filtering.
A few tests have been categorized. Feel free to categorize others, and to suggest new categories that we could want to use.
All categories need to be validly defined in dotest.py, or the test suite will refuse to run when you use them as arguments to --category.
In the end, failures will be reported on a per-category basis, as well as in the usual format.
This is the very first stage of this feature. Feel free to chime in with ideas for improvements!
llvm-svn: 164403
either @dsym_test or @dwarf_test to be executed during the testsuite run. There are still lots of
Test*.py files which have not been decorated with the new decorator.
An example:
# From TestMyFirstWatchpoint.py ->
class HelloWatchpointTestCase(TestBase):
mydir = os.path.join("functionalities", "watchpoint", "hello_watchpoint")
@dsym_test
def test_hello_watchpoint_with_dsym_using_watchpoint_set(self):
"""Test a simple sequence of watchpoint creation and watchpoint hit."""
self.buildDsym(dictionary=self.d)
self.setTearDownCleanup(dictionary=self.d)
self.hello_watchpoint()
@dwarf_test
def test_hello_watchpoint_with_dwarf_using_watchpoint_set(self):
"""Test a simple sequence of watchpoint creation and watchpoint hit."""
self.buildDwarf(dictionary=self.d)
self.setTearDownCleanup(dictionary=self.d)
self.hello_watchpoint()
# Invocation ->
[17:50:14] johnny:/Volumes/data/lldb/svn/ToT/test $ ./dotest.py -N dsym -v -p TestMyFirstWatchpoint.py
LLDB build dir: /Volumes/data/lldb/svn/ToT/build/Debug
LLDB-137
Path: /Volumes/data/lldb/svn/ToT
URL: https://johnny@llvm.org/svn/llvm-project/lldb/trunk
Repository Root: https://johnny@llvm.org/svn/llvm-project
Repository UUID: 91177308-0d34-0410-b5e6-96231b3b80d8
Revision: 154133
Node Kind: directory
Schedule: normal
Last Changed Author: gclayton
Last Changed Rev: 154109
Last Changed Date: 2012-04-05 10:43:02 -0700 (Thu, 05 Apr 2012)
Session logs for test failures/errors/unexpected successes will go into directory '2012-04-05-17_50_49'
Command invoked: python ./dotest.py -N dsym -v -p TestMyFirstWatchpoint.py
compilers=['clang']
Configuration: arch=x86_64 compiler=clang
----------------------------------------------------------------------
Collected 2 tests
1: test_hello_watchpoint_with_dsym_using_watchpoint_set (TestMyFirstWatchpoint.HelloWatchpointTestCase)
Test a simple sequence of watchpoint creation and watchpoint hit. ... skipped 'dsym tests'
2: test_hello_watchpoint_with_dwarf_using_watchpoint_set (TestMyFirstWatchpoint.HelloWatchpointTestCase)
Test a simple sequence of watchpoint creation and watchpoint hit. ... ok
----------------------------------------------------------------------
Ran 2 tests in 1.138s
OK (skipped=1)
Session logs for test failures/errors/unexpected successes can be found in directory '2012-04-05-17_50_49'
[17:50:50] johnny:/Volumes/data/lldb/svn/ToT/test $
llvm-svn: 154154
instead of the __repr__. __repr__ is a function that should return an
expression that can be used to recreate an python object and we were using
it to just return a human readable string.
Fixed a crasher when using the new implementation of SBValue::Cast(SBType).
Thread hardened lldb::SBValue and lldb::SBWatchpoint and did other general
improvements to the API.
Fixed a crasher in lldb::SBValue::GetChildMemberWithName() where we didn't
correctly handle not having a target.
llvm-svn: 149743
valobj.AddressOf() returns None when an address is expected in a SyntheticChildrenProvider
Patch from Enrico Granata:
The problem was that the frozen object created by the expression parser was a copy of the contents of the StgClosure, rather than a pointer to it. Thus, the expression parser was correctly computing the result of the arithmetic&cast operation along with its address, but only saving it in the live object. This meant that the frozen copy acted as an address-less variable, hence the problem.
The fix attached to this email lets the expression parser store the "live address" in the frozen copy of the address when the object is built without a valid address of its own.
Doing so, along with delegating ValueObjectConstResult to calculate its own address when necessary, solves the issue. I have also added a new test case to check for regressions in this area, and checked that existing test cases pass correctly.
llvm-svn: 146768
it to generate result variables that were not bound
to their underlying data. This allowed the SBValue
class to use the interpreter (if possible).
Also made sure that any result variables that point
to stack allocations in the stack frame of the
interpreted expressions do not get live data.
llvm-svn: 140285
- introduced two new classes ValueObjectConstResultChild and ValueObjectConstResultImpl: the first one is a ValueObjectChild obtained from
a ValueObjectConstResult, the second is a common implementation backend for VOCR and VOCRCh of method calls meant to read through pointers stored
in frozen objects ; now such reads transparently move from host to target as required
- as a consequence of the above, removed code that made target-memory copies of expression results in several places throughout LLDB, and also
removed code that enabled to recognize an expression result VO as such
- introduced a new GetPointeeData() method in ValueObject that lets you read a given amount of objects of type T from a VO
representing a T* or T[], and doing dereferences transparently
in private layer it returns a DataExtractor ; in public layer it returns an instance of a newly created lldb::SBData
- as GetPointeeData() does the right thing for both frozen and non-frozen ValueObject's, reimplemented ReadPointedString() to use it
en lieu of doing the raw read itself
- introduced a new GetData() method in ValueObject that lets you get a copy of the data that backs the ValueObject (for pointers,
this returns the address without any previous dereferencing steps ; for arrays it actually reads the whole chunk of memory)
in public layer this returns an SBData, just like GetPointeeData()
- introduced a new CreateValueFromData() method in SBValue that lets you create a new SBValue from a chunk of data wrapped in an SBData
the limitation to remember for this kind of SBValue is that they have no address: extracting the address-of for these objects (with any
of GetAddress(), GetLoadAddress() and AddressOf()) will return invalid values
- added several tests to check that "p"-ing objects (STL classes, char* and char[]) will do the right thing
Solved a bug where global pointers to global variables were not dereferenced correctly for display
New target setting "max-string-summary-length" gives the maximum number of characters to show in a string when summarizing it, instead of the hardcoded 128
Solved a bug where the summary for char[] and char* would not be shown if the ValueObject's were dumped via the "p" command
Removed m_pointers_point_to_load_addrs from ValueObject. Introduced a new m_address_type_of_children, which each ValueObject can set to tell the address type
of any pointers and/or references it creates. In the current codebase, this is load address most of the time (the only notable exception being file
addresses that generate file address children UNLESS we have a live process)
Updated help text for summary-string
Fixed an issue in STL formatters where std::stlcontainer::iterator would match the container's synthetic children providers
Edited the syntax and help for some commands to have proper argument types
llvm-svn: 139160
expression parser. You can use a persistent
type like this:
(lldb) expr struct $foo { int a; int b; };
(lldb) struct $foo i; i.a = 2; i.b = 3; i
($foo) $0 = {
(int) a = 2
(int) b = 3
}
typedefs work similarly.
This patch affects the following files:
test/expression_command/persistent_types/*
A test case for persistent types,
in particular structs and typedefs.
ClangForward.h
Added TypeDecl, needed to declare some
functions in ASTResultSynthesizer.h
ClangPersistentVariables.[h,cpp]
Added a list of persistent types to the
persistent variable store.
ASTResultSynthesizer.[h,cpp]
Made the AST result synthesizer iterate
across TypeDecls in the expression, and
record any persistent types found. Also
made a minor documentation fix.
ClangUserExpression.[h,cpp]
Extended the user expression class to
keep the state needed to report the
persistent variable store for the target
to the AST result synthesizers.
Also introduced a new error code for
expressions that executed normally but
did not return a result.
CommandObjectExpression.cpp
Improved output for expressions (like
declarations of new persistent types) that
don't return a result. This is no longer
treated as an error.
llvm-svn: 138383
the SBType implementation classes.
Fixed LLDB core and the test suite to not use deprecated SBValue APIs.
Added a few new APIs to SBValue:
int64_t
SBValue::GetValueAsSigned(int64_t fail_value=0);
uint64_t
SBValue::GetValueAsUnsigned(uint64_t fail_value=0)
llvm-svn: 136829
Jim Ingham