I've put CMPXCHG8B/CMPXCHG16B in the same file, even though technically they are under separate CPUID bits all targets seem to support both (or neither).
llvm-svn: 338595
Summary:
Add support for --rename-section flags from gnu objcopy.
Not all flags appear to have an effect for ELF objects, but allowing them would allow easier drop-in replacement. Other unrecognized flags are rejected.
This was only tested by comparing flags printed by "readelf -e <.o>" against the output of gnu vs llvm objcopy, it hasn't been tested to be valid beyond that.
Reviewers: jakehehrlich, alexshap
Subscribers: llvm-commits, paulsemel, alexshap
Differential Revision: https://reviews.llvm.org/D49870
llvm-svn: 338582
Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
llvm-svn: 338494
Summary:
See binutils-gdb/bfd/elf.c, GNU objcopy also strips .stab* (STABS)
.line* (DWARF 1) .gnu.linkonce.wi.* (linkonce section for .debug_info) but
I'm not sure we need to be compatible with it.
Reviewers: dblaikie, alexshap, jakehehrlich, jhenderson
Reviewed By: alexshap, jakehehrlich
Subscribers: aprantl, JDevlieghere, jakehehrlich, llvm-commits
Differential Revision: https://reviews.llvm.org/D50100
llvm-svn: 338443
These aren't exhaustive, but cover some instructions that are only available in 32-bit mode (where would we be without good BCD math performance?).
llvm-svn: 338404
Summary:
This patch improves Inliner to provide causes/reasons for negative inline decisions.
1. It adds one new message field to InlineCost to report causes for Always and Never instances. All Never and Always instantiations must provide a simple message.
2. Several functions that used to return the inlining results as boolean are changed to return InlineResult which carries the cause for negative decision.
3. Changed remark priniting and debug output messages to provide the additional messages and related inline cost.
4. Adjusted tests for changed printing.
Patch by: yrouban (Yevgeny Rouban)
Reviewers: craig.topper, sammccall, sgraenitz, NutshellySima, shchenz, chandlerc, apilipenko, javed.absar, tejohnson, dblaikie, sanjoy, eraman, xbolva00
Reviewed By: tejohnson, xbolva00
Subscribers: xbolva00, llvm-commits, arsenm, mehdi_amini, eraman, haicheng, steven_wu, dexonsmith
Differential Revision: https://reviews.llvm.org/D49412
llvm-svn: 338387
This patch teaches llvm-mca how to identify dependency breaking instructions on
btver2.
An example of dependency breaking instructions is the zero-idiom XOR (example:
`XOR %eax, %eax`), which always generates zero regardless of the actual value of
the input register operands.
Dependency breaking instructions don't have to wait on their input register
operands before executing. This is because the computation is not dependent on
the inputs.
Not all dependency breaking idioms are also zero-latency instructions. For
example, `CMPEQ %xmm1, %xmm1` is independent on
the value of XMM1, and it generates a vector of all-ones.
That instruction is not eliminated at register renaming stage, and its opcode is
issued to a pipeline for execution. So, the latency is not zero.
This patch adds a new method named isDependencyBreaking() to the MCInstrAnalysis
interface. That method takes as input an instruction (i.e. MCInst) and a
MCSubtargetInfo.
The default implementation of isDependencyBreaking() conservatively returns
false for all instructions. Targets may override the default behavior for
specific CPUs, and return a value which better matches the subtarget behavior.
In future, we should teach to Tablegen how to automatically generate the body of
isDependencyBreaking from scheduling predicate definitions. This would allow us
to expose the knowledge about dependency breaking instructions to the machine
schedulers (and, potentially, other codegen passes).
Differential Revision: https://reviews.llvm.org/D49310
llvm-svn: 338372
Dsymutil's update functionality was broken on Windows because we tried
to rename a file while we're holding open handles to that file. TempFile
provides a solution for this through its keep(Twine) method. This patch
changes dsymutil to make use of that functionality.
Differential revision: https://reviews.llvm.org/D49860
llvm-svn: 338216
Summary:
These two cases will trigger a dereference on a nullptr, since the
SymbolTable can be nonexistent for a given library, in addition to just
being empty.
Reviewers: alexshap
Reviewed By: alexshap
Subscribers: meikeb, kongyi, chh, jakehehrlich, llvm-commits, pirama
Differential Revision: https://reviews.llvm.org/D49534
llvm-svn: 338062
Apparently, the issue with dsymutil update functionality on Windows was
that Windows doesn't like dsymutil renaming files that have open handles
to them. This disables the new accelerator test and updates the comment
in the other two test.
We should be able to enable the tests again once we updated the
implementation to use TempFile::keep() to keep the temporary files in
MachOUtils.
A big thank you to Jeremy Morse from Sony for figuring this out and
bringing it to my attention.
llvm-svn: 338030
Update the dSYM bundle in place when swapping out the accelerator
tables. This should unbreak the windows bot that have been failing with
an access denied.
llvm-svn: 338014
This patch add support for emitting DWARF5 accelerator tables
(.debug_names) from dsymutil. Just as with the Apple style accelerator
tables, it's possible to update existing dSYMs. This patch includes a
test that show how you can convert back and forth between the two types.
If no kind of table is specified, dsymutil will default to generating
Apple-style accelerator tables whenever it finds those in its input. The
same is true when there are no accelerator tables at all. Finally, in
the remaining case, where there's at least one DWARF v5 table and no
Apple ones, the output will contains a DWARF accelerator tables
(.debug_names).
Differential revision: https://reviews.llvm.org/D49137
llvm-svn: 337980
Helpers are available to make this option file format independant. This
patch adds the feature for Wasm file format. It doesn't change the
behavior of the other file format handling.
Differential Revision: https://reviews.llvm.org/D49545
llvm-svn: 337896
The intent is to use it for location list tables as well. Change is almost NFC with the exception
of the spelling of some strings used during dumping (all lowercase now).
Reviewer: JDevlieghere
Differential Revision: https://reviews.llvm.org/D49500
llvm-svn: 337763
Dynamic section holds a table, so the sh_entsize might be set. As the
dynamic section entry size never changes, we can default it to the size
of a dynamic entry.
Differential Revision: https://reviews.llvm.org/D49619
llvm-svn: 337725
Summary:
Pretty mechanical follow-up for D49196.
As microarchitecture.pdf notes, "20 AMD Ryzen pipeline",
"20.8 Register renaming and out-of-order schedulers":
The integer register file has 168 physical registers of 64 bits each.
The floating point register file has 160 registers of 128 bits each.
"20.14 Partial register access":
The processor always keeps the different parts of an integer register together.
...
An instruction that writes to part of a register will therefore have a false dependence
on any previous write to the same register or any part of it.
Reviewers: andreadb, courbet, RKSimon, craig.topper, GGanesh
Reviewed By: GGanesh
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D49393
llvm-svn: 337676
Summary:
Add basic support for --rename-section=old=new to llvm-objcopy.
A full replacement for GNU objcopy requires also modifying flags (i.e. --rename-section=old=new,flag1,flag2); I'd like to keep that in a separate change to keep this simple.
Reviewers: jakehehrlich, alexshap
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49576
llvm-svn: 337604
Summary: In Python 3, sys.stdout.write expects a string rather than bytes. In order to be able to write the bytes to stdout, we need to use the buffer directly instead. This change is borrowing the implementation for writing to stdout that cat.py uses. Note that we cannot use cat.py directly because the file we are trying to open is a gzip file.
Reviewers: asmith, bkramer, alexshap, jakehehrlich
Reviewed By: alexshap, jakehehrlich
Subscribers: jakehehrlich, llvm-commits
Differential Revision: https://reviews.llvm.org/D49515
llvm-svn: 337567
This patch fixes the latency/throughput of LEA instructions in the BtVer2
scheduling model.
On Jaguar, A 3-operands LEA has a latency of 2cy, and a reciprocal throughput of
1. That is because it uses one cycle of SAGU followed by 1cy of ALU1. An LEA
with a "Scale" operand is also slow, and it has the same latency profile as the
3-operands LEA. An LEA16r has a latency of 3cy, and a throughput of 0.5 (i.e.
RThrouhgput of 2.0).
This patch adds a new TIIPredicate named IsThreeOperandsLEAFn to X86Schedule.td.
The tablegen backend (for instruction-info) expands that definition into this
(file X86GenInstrInfo.inc):
```
static bool isThreeOperandsLEA(const MachineInstr &MI) {
return (
(
MI.getOpcode() == X86::LEA32r
|| MI.getOpcode() == X86::LEA64r
|| MI.getOpcode() == X86::LEA64_32r
|| MI.getOpcode() == X86::LEA16r
)
&& MI.getOperand(1).isReg()
&& MI.getOperand(1).getReg() != 0
&& MI.getOperand(3).isReg()
&& MI.getOperand(3).getReg() != 0
&& (
(
MI.getOperand(4).isImm()
&& MI.getOperand(4).getImm() != 0
)
|| (MI.getOperand(4).isGlobal())
)
);
}
```
A similar method is generated in the X86_MC namespace, and included into
X86MCTargetDesc.cpp (the declaration lives in X86MCTargetDesc.h).
Back to the BtVer2 scheduling model:
A new scheduling predicate named JSlowLEAPredicate now checks if either the
instruction is a three-operands LEA, or it is an LEA with a Scale value
different than 1.
A variant scheduling class uses that new predicate to correctly select the
appropriate latency profile.
Differential Revision: https://reviews.llvm.org/D49436
llvm-svn: 337469
When output style is GNU and amount of sections is >= SHN_LORESERVE,
llvm-readobj reports zero number of sections instead of actual value.
The patch fixes that.
Differential revision: https://reviews.llvm.org/D49544
llvm-svn: 337462
Imagine we have a file with few sections, and one of them is .foo
with index N != 0.
Problem is that when llvm-objdump is given a -section=.foo parameter
it lists .foo as a section at index 0. That makes impossible to write
test cases which needs to find the index of the particular section,
while ignoring dumping of others.
The patch fixes that.
Differential revision: https://reviews.llvm.org/D49372
llvm-svn: 337361
http://www.sco.com/developers/gabi/2003-12-17/ch4.eheader.html
says that e_shnum and/or e_shstrndx may have special values if
"the number of sections is greater than or equal to SHN_LORESERVE" or
"the section name string table section index is greater than or equal to SHN_LORESERVE (0xff00)"
Previously llvm-readobj was unable to dump such files, patch changes that.
I had to add a precompiled test case because it does not seem possible to
prepare a test using yaml2obj or llvm-mc (not clear how to make .shstrtab
to have index >= SHN_LORESERVE).
Differential revision: https://reviews.llvm.org/D49369
llvm-svn: 337360
Add llvm-mca tests demonstrating how LEA instructions are currently modelled. Once this is working on btver2 I'll copy the test file to the other target directories.
llvm-svn: 337297
This patch is an update of an older patch that never landed
(see here: https://reviews.llvm.org/D42516)
Recently various users have run into this issue and it just 100%
has to be solved at this point. The main difference in this patch
is that I use gunzip instead of unzip which should hopefully allow
tests to pass. Please review this as if it is a new patch however.
I found some issues along the way and made some minor modifications.
The binary used in this patch for testing (a zip file to make it small)
can be found here:
https://drive.google.com/file/d/1UjsnTO9edLttZibbr-2T1bJl92KEQFAO/view?usp=sharing
Differential Revision: https://reviews.llvm.org/D49206
llvm-svn: 337204
As suggested in the review for r337007, this makes cfi-verify abort on unsupported targets instead of producing incorrect results. It also updates the design document to reflect this.
Differential Revision: https://reviews.llvm.org/D49304
llvm-svn: 337181
registers.
The goal of this patch is to improve the throughput analysis in llvm-mca for the
case where instructions perform partial register writes.
On x86, partial register writes are quite difficult to model, mainly because
different processors tend to implement different register merging schemes in
hardware.
When the code contains partial register writes, the IPC (instructions per
cycles) estimated by llvm-mca tends to diverge quite significantly from the
observed IPC (using perf).
Modern AMD processors (at least, from Bulldozer onwards) don't rename partial
registers. Quoting Agner Fog's microarchitecture.pdf:
" The processor always keeps the different parts of an integer register together.
For example, AL and AH are not treated as independent by the out-of-order
execution mechanism. An instruction that writes to part of a register will
therefore have a false dependence on any previous write to the same register or
any part of it."
This patch is a first important step towards improving the analysis of partial
register updates. It changes the semantic of RegisterFile descriptors in
tablegen, and teaches llvm-mca how to identify false dependences in the presence
of partial register writes (for more details: see the new code comments in
include/Target/TargetSchedule.h - class RegisterFile).
This patch doesn't address the case where a write to a part of a register is
followed by a read from the whole register. On Intel chips, high8 registers
(AH/BH/CH/DH)) can be stored in separate physical registers. However, a later
(dirty) read of the full register (example: AX/EAX) triggers a merge uOp, which
adds extra latency (and potentially affects the pipe usage).
This is a very interesting article on the subject with a very informative answer
from Peter Cordes:
https://stackoverflow.com/questions/45660139/how-exactly-do-partial-registers-on-haswell-skylake-perform-writing-al-seems-to
In future, the definition of RegisterFile can be extended with extra information
that may be used to identify delays caused by merge opcodes triggered by a dirty
read of a partial write.
Differential Revision: https://reviews.llvm.org/D49196
llvm-svn: 337123
The bot has a /b directory, so /? matches against that and gets expanded to it.
(Thanks to Hans's r187366, which solved the same problem for clang-cl a while
ago and which saved me much head scratching.)
llvm-svn: 337092
For instance, When dumping .apple_types, the second atom represents the
DW_TAG. In addition to printing the raw value, we now also pretty print
the value if the ATOM tells us how.
llvm-svn: 337026
This patch adds support for AArch64 to cfi-verify.
This required three changes to cfi-verify. First, it generalizes checking if an instruction is a trap by adding a new isTrap flag to TableGen (and defining it for x86 and AArch64). Second, the code that ensures that the operand register is not clobbered between the CFI check and the indirect call needs to allow a single dereference (in x86 this happens as part of the jump instruction). Third, we needed to ensure that return instructions are not counted as indirect branches. Technically, returns are indirect branches and can be covered by CFI, but LLVM's forward-edge CFI does not protect them, and x86 does not consider them, so we keep that behavior.
In addition, we had to improve AArch64's code to evaluate the branch target of a MCInst to handle calls where the destination is not the first operand (which it often is not).
Differential Revision: https://reviews.llvm.org/D48836
llvm-svn: 337007
Summary:
llvm-xray changes:
- account-mode - process-id {...} shows after thread-id
- convert-mode - process {...} shows after thread
- parses FDR and basic mode pid entries
- Checks version number for FDR log parsing.
Basic logging changes:
- Update header version from 2 -> 3
FDR logging changes:
- Update header version from 2 -> 3
- in writeBufferPreamble, there is an additional PID Metadata record (after thread id record and tsc record)
Test cases changes:
- fdr-mode.cc, fdr-single-thread.cc, fdr-thread-order.cc modified to catch process id output in the log.
Reviewers: dberris
Reviewed By: dberris
Subscribers: hiraditya, llvm-commits, #sanitizers
Differential Revision: https://reviews.llvm.org/D49153
llvm-svn: 336974
Not all programs want section ordering when compiled with LTO.
In particular, the Linux kernel is very sensitive when it comes to linking, and
doesn't boot when each function is placed in its own sections.
Reviewed By: pcc
Differential Revision: https://reviews.llvm.org/D48756
llvm-svn: 336943
Summary:
This option appears to have been dropped as part of the refactoring in
r331663. Unfortunately, if we want to use llvm-strip as a drop-in
replacement for strip, this option should still be available.
Reviewers: alexshap
Reviewed By: alexshap
Subscribers: meikeb, kongyi, chh, jakehehrlich, llvm-commits, pirama
Differential Revision: https://reviews.llvm.org/D49226
llvm-svn: 336921
Before revision 336728, the "mayLoad" flag for instruction (V)MOVLPSrm was
inferred directly from the "default" pattern associated with the instruction
definition.
r336728 removed special node X86Movlps, and all the patterns associated to it.
Now instruction (V)MOVLPSrm doesn't have a pattern associated to it, and the
'mayLoad/hasSideEffects' flags are left unset.
When the instruction info is emitted by tablegen, method
CodeGenDAGPatterns::InferInstructionFlags() sees that (V)MOVLPSrm doesn't have a
pattern, and flags are undefined. So, it conservatively sets the
"hasSideEffects" flag for it.
As a consequence, we were losing the 'mayLoad' flag, and we were gaining a
'hasSideEffect' flag in its place.
This patch fixes the issue (originally reported by Michael Holmen).
The mca tests show the differences in the instruction info flags. Instructions
that were affected by this problem were: MOVLPSrm/VMOVLPSrm/VMOVLPSZ128rm.
Differential Revision: https://reviews.llvm.org/D49182
llvm-svn: 336818
This makes easier to identify changes in the instruction info flags. It also
helps spotting potential regressions similar to the one recently introduced at
r336728.
Using the same character to mark MayLoad/MayStore/HasSideEffects is problematic
for llvm-lit. When pattern matching substrings, llvm-lit consumes tabs and
spaces. A change in position of the flag marker may not trigger a test failure.
This patch only changes the character used for flag `hasSideEffects`. The reason
why I didn't touch other flags is because I want to avoid spamming the mailing
because of the massive diff due to the numerous tests affected by this change.
In future, each instruction flag should be associated with a different character
in the Instruction Info View.
llvm-svn: 336797
llvm-mca doesn't know that on modern AMD processors, portions of a general
purpose register are not treated independently. So, a partial register write has
a false dependency on the super-register.
The issue with partial register writes will be addressed by a follow-up patch.
llvm-svn: 336778
When implementing the DWARF accelerator tables in dsymutil I ran into an
assertion in the assembler. Debugging these kind of issues is a lot
easier when looking at the assembly instead of debugging the assembler
itself. Since it's only a matter of creating an AsmStreamer instead of a
MCObjectStreamer it made sense to turn this into a (hidden) dsymutil
feature.
Differential revision: https://reviews.llvm.org/D49079
llvm-svn: 336561
This is a short-term fix for PR38093.
For now, we llvm::report_fatal_error if the instruction builder finds an
unsupported instruction in the instruction stream.
We need to revisit this fix once we start addressing PR38101.
Essentially, we need a better framework for error handling.
llvm-svn: 336543
This diff adds support for handling static libraries
to llvm-objcopy and llvm-strip.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D48413
llvm-svn: 336455
This patch modifies the Scheduler heuristic used to select the next instruction
to issue to the pipelines.
The motivating example is test X86/BtVer2/add-sequence.s, for which llvm-mca
wrongly reported an estimated IPC of 1.50. According to perf, the actual IPC for
that test should have been ~2.00.
It turns out that an IPC of 2.00 for test add-sequence.s cannot possibly be
predicted by a Scheduler that only prioritizes instructions based on their
"age". A similar issue also affected test X86/BtVer2/dependent-pmuld-paddd.s,
for which llvm-mca wrongly estimated an IPC of 0.84 instead of an IPC of 1.00.
Instructions in the ReadyQueue are now ranked based on two factors:
- The "age" of an instruction.
- The number of unique users of writes associated with an instruction.
The new logic still prioritizes older instructions over younger instructions to
minimize the pressure on the reorder buffer. However, the number of users of an
instruction now also affects the overall rank. This potentially increases the
ability of the Scheduler to extract instruction level parallelism. This patch
fixes the problem with the wrong IPC reported for test add-sequence.s and test
dependent-pmuld-paddd.s.
llvm-svn: 336420
Summary:
Add support for two additional ObjC image info flags: `IS_SIMULATED` and
`HAS_CATEGORY_CLASS_PROPERTIES`.
`IS_SIMULATED` indicates a Mach-O binary built for iOS simulator.
`HAS_CATEGORY_CLASS_PROPERTIES` indicates a Mach-O binary built by a compiler
that supports class properties in categories.
Reviewers: enderby, compnerd
Reviewed By: compnerd
Subscribers: keith, llvm-commits
Differential Revision: https://reviews.llvm.org/D48568
llvm-svn: 336411
Summary:
Add support for two additional ObjC image info flags: `IS_SIMULATED` and
`HAS_CATEGORY_CLASS_PROPERTIES`.
`IS_SIMULATED` indicates a Mach-O binary built for iOS simulator.
`HAS_CATEGORY_CLASS_PROPERTIES` indicates a Mach-O binary built by a compiler
that supports class properties in categories.
Reviewers: enderby, compnerd
Reviewed By: compnerd
Subscribers: keith, llvm-commits
Differential Revision: https://reviews.llvm.org/D48568
llvm-svn: 336399
This test is failing because of the disas part.
For the moment, I will juste remove it. I will add it again tomorrow
with a proper fix.
llvm-svn: 336370
Summary: As per `Agner's Microarchitecture doc
(21.8 AMD Bobcat and Jaguar pipeline - Dependency-breaking instructions)`,
these, like zero-idioms, are dependency-breaking,
although they produce ones and still consume resources.
FIXME: as discussed in D48877, llvm-mca handling is broken for these.
Reviewers: andreadb
Reviewed By: andreadb
Subscribers: gbedwell, RKSimon, llvm-commits
Differential Revision: https://reviews.llvm.org/D48876
llvm-svn: 336292
Summary:
In the individual index files emitted for distributed ThinLTO backends,
the module path ids are not contiguous. Assign slots to module paths in
order to handle this better and also to get contiguous numbering in the
summary assembly.
Reviewers: davidxl, dexonsmith
Subscribers: mehdi_amini, inglorion, eraman, llvm-commits, steven_wu
Differential Revision: https://reviews.llvm.org/D48698
llvm-svn: 336148
Summary:
This adds a new -no-weak flag to nm to hide weak symbols in its output.
This also adds a -W alias for this which is analogous to -U.
Patch by Keith Smiley
Reviewers: kastiglione, enderby, compnerd
Reviewed By: kastiglione
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48751
llvm-svn: 336126
We were printing every character, even those that weren't printable. It
doesn't really make sense for this option.
The string content was sticked to its address, added two spaces in
between.
Differential Revision: https://reviews.llvm.org/D48271
llvm-svn: 336058
This change adds experimental support for SHT_RELR sections, proposed
here: https://groups.google.com/forum/#!topic/generic-abi/bX460iggiKg
Definitions for the new ELF section type and dynamic array tags, as well
as the encoding used in the new section are all under discussion and are
subject to change. Use with caution!
Author: rahulchaudhry
Differential Revision: https://reviews.llvm.org/D47919
llvm-svn: 335922
IT instructions are allowed to have the 'AL' predicate, but it must never
result in an 'NV' predicated instruction. Essentially this means that all
branches must be 't' rather than 'e' if the predicate is 'AL'.
This patch adds a diagnostic for this during assembly (error because parsing
hits an assertion if allowed to continue) and an annotation during disassembly.
llvm-svn: 335593
This removes debug locations from ConstantSDNode and ConstantSDFPNode.
When this kind of node is materialized we no longer create a line table
entry which jumps back to the constant's first point of use. This makes
single-stepping behavior smoother, and it matches the model used by IR,
where Constants have no locations. See this thread for more context:
http://lists.llvm.org/pipermail/llvm-dev/2018-June/124164.html
I'd like to handle constant BuildVectorSDNodes and to try to eliminate
passing SDLocs to SelectionDAG::getConstant*() in follow-up commits.
Differential Revision: https://reviews.llvm.org/D48468
llvm-svn: 335497
Simon Pilgrim