Summary:
Refactoring done by rL340872 accidentally appeared to be non-NFC, changing the way how
multiple instances of the same pass are handled - aggregation of results by PassName
forced data for multiple instances to be merged together and reported as one line.
Getting back to creating/reporting timers per pass instance.
Reporting was a bit enhanced by counting pass instances and adding #<num> suffix
to the pass description. Note that it is instances that are being counted,
not invocations of them.
time-passes test updated to account for multiple passes being run.
Reviewers: paquette, jhenderson, MatzeB, skatkov
Reviewed By: skatkov
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51535
llvm-svn: 341346
This patch removes the function `expandSCEVIfNeeded` which behaves not as
it was intended. This function tries to make a lookup for exact existing expansion
and only goes to normal expansion via `expandCodeFor` if this lookup hasn't found
anything. As a result of this, if some instruction above the loop has a `SCEVConstant`
SCEV, this logic will return this instruction when asked for this `SCEVConstant` rather
than return a constant value. This is both non-profitable and in some cases leads to
breach of LCSSA form (as in PR38674).
Whether or not it is possible to break LCSSA with this algorithm and with some
non-constant SCEVs is still in question, this is still being investigated. I wasn't
able to construct such a test so far, so maybe this situation is impossible. If it is,
it will go as a separate fix.
Rather than do it, it is always correct to just invoke `expandCodeFor` unconditionally:
it behaves smarter about insertion points, and as side effect of this it will choose a
constant value for SCEVConstants. For other SCEVs it may end up finding a better insertion
point. So it should not be worse in any case.
NOTE: So far the only known case for which this transform may break LCSSA is mapping
of SCEVConstant to an instruction. However there is a suspicion that the entire algorithm
can compromise LCSSA form for other cases as well (yet not proved).
Differential Revision: https://reviews.llvm.org/D51286
Reviewed By: etherzhhb
llvm-svn: 341345
Usage:
llvm-objcopy --compress-debug-sections=zlib foo.o
llvm-objcopy --compress-debug-sections=zlib-gnu foo.o
In both cases the debug section contents is compressed with zlib. In the GNU
style case the header is the "ZLIB" magic string followed by the uint64 big-
endian decompressed size. In the non-GNU mode the header is the
Elf(32|64)_Chdr.
Decompression support is coming soon.
Differential Revision: https://reviews.llvm.org/D49678
llvm-svn: 341342
This patch modifies hasStandardEncoding() / inMicroMipsMode() /
inMips16Mode() methods of the MipsSubtarget class so only one can be
true at any one time. That prevents the selection of microMIPS and MIPS
instructions and patterns that are defined in TableGen files at the same
time. A few new patterns and instruction definitions hae been added to
keep test cases passed.
Differential revision: https://reviews.llvm.org/D51483
llvm-svn: 341338
A ReadAdvance was incorrectly added to the SchedReadWrite list associated with
the following SSE instructions:
sqrtss
sqrtsd
rsqrtss
rcpss
As a consequence, a wrong operand latency was computed for the register operand
used as the base address of the folded load operand.
This patch removes the wrong ReadAdvance, and updates the llvm-mca test cases.
There is still a problem with correctly modeling partial register writes on XMM
registers This other problem is currently tracked here:
https://bugs.llvm.org/show_bug.cgi?id=38813
Differential Revision: https://reviews.llvm.org/D51542
llvm-svn: 341326
According to the standard, for the .debug_names (the "dwarf accelerator
tables"):
> If a subprogram or inlined subroutine is included, and has a
> DW_AT_linkage_name attribute, there will be an additional index entry
> for the linkage name.
For Swift we generate DW_structure_types with a linkage name and the
verifier was incorrectly rejecting this. This patch fixes that by only
considering the linkage name in those particular cases. The test is the
"reduced" debug info of the failing swift test on swift.org.
Differential revision: https://reviews.llvm.org/D51420
llvm-svn: 341311
For instructions that spill/fill to and from multiple frame-indices
in a single instruction, hasStoreToStackSlot and hasLoadFromStackSlot
should return an array of accesses, rather than just the first encounter
of such an access.
This better describes FI accesses for AArch64 (paired) LDP/STP
instructions.
Reviewers: t.p.northover, gberry, thegameg, rengolin, javed.absar, MatzeB
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D51537
llvm-svn: 341301
When doing some instruction scheduling work, we noticed some missing itineraries.
Before we switch to machine scheduler, those missing itineraries might not have impact to actually scheduling,
because we can still get same latency due to default values.
With machine scheduler, however, itineraries will have impact to scheduling.
eg: NumMicroOps will default to be 0 if there is NO itineraries for specific instruction class.
And most of the instruction class with itineraries will have NumMicroOps default to 1.
This will has impact on the count of RetiredMOps, affects the Pending/Available Queue,
then causing different scheduling or suboptimal scheduling further.
Patch by jsji (Jinsong Ji)
Differential Revision: https://reviews.llvm.org/D51506
llvm-svn: 341293
The fold was implemented for the general case but use-limitation,
but the later constant version which didn't check uses was only
matching splat constants.
llvm-svn: 341292
In lib/CodeGen/LiveDebugVariables.cpp, it uses std::prev(MBBI) to
get DebugValue's SlotIndex. However, the previous instruction may be
also a debug instruction. It could not use a debug instruction to query
SlotIndex in mi2iMap.
Scan all debug instructions and use the first debug instruction to query
SlotIndex for following debug instructions. Only handle DBG_VALUE in
handleDebugValue().
Differential Revision: https://reviews.llvm.org/D50621
llvm-svn: 341289
If we have a pair of binops feeding another pair of binops, rearrange the operands so
the matching pair are together because that allows easy factorization folds to happen
in instcombine:
((X << S) & Y) & (Z << S) --> ((X << S) & (Z << S)) & Y (reassociation)
--> ((X & Z) << S) & Y (factorize shift from 'and' ops optimization)
This is part of solving PR37098:
https://bugs.llvm.org/show_bug.cgi?id=37098
Note that there's an instcombine version of this patch attached there, but we're trying
to make instcombine have less responsibility to improve compile-time efficiency.
For reasons I still don't completely understand, reassociate does this kind of transform
sometimes, but misses everything in my motivating cases.
This patch on its own is gluing an independent cleanup chunk to the end of the existing
RewriteExprTree() loop. We can build on it and do something stronger to better order the
full expression tree like D40049. That might be an alternative to the proposal to add a
separate reassociation pass like D41574.
Differential Revision: https://reviews.llvm.org/D45842
llvm-svn: 341288
Summary:
A follow-up for D49266 / rL337166 + D49497 / rL338044.
This is still the same pattern to check for the [lack of]
signed truncation, but in this case the constants and the predicate
are negated.
https://rise4fun.com/Alive/BDVhttps://rise4fun.com/Alive/n7Z
Reviewers: spatel, craig.topper, RKSimon, javed.absar, efriedma, dmgreen
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51532
llvm-svn: 341287
The 'rol Rd' instruction is equivalent to 'adc Rd'.
This caused compile warnings from tablegen because of conflicting bits
shared between each instruction.
llvm-svn: 341275
Leverage existing logic in constant hoisting pass to transform constant GEP
expressions sharing the same base global variable. Multi-dimensional GEPs are
rewritten into single-dimensional GEPs.
Differential Revision: https://reviews.llvm.org/D51396
llvm-svn: 341269
ModuleCount = InstrCount was incorrect. It should have been
InstrCount = ModuleCount. This was making it emit an extra, incorrect remark
for Print Module IR.
The test didn't catch this, because it didn't ensure that the only remark
output was from the desired pass. So, it was possible to have an extra remark
come through and not fail. Updated the test so that we ensure that the last
remark that's output comes from the desired pass. This is done by ensuring
that whatever is being read after the last remark is YAML output rather than
some incorrect garbage.
llvm-svn: 341267
These intrinsics use the same implementation as PTEST intrinsics, but use vXi1 vectors.
New clang builtins will be accompanying them shortly.
llvm-svn: 341259
Following D50807, and heading towards D50664, this intermediary change does the following:
1. Upgrade all custom Error types in llvm/trunk/lib/DebugInfo/ to use the new StringError behavior (D50807).
2. Implement std::is_error_code_enum and make_error_code() for DebugInfo error enumerations.
3. Rename GenericError -> PDBError (the file will be renamed in a subsequent commit)
4. Update custom error messages to follow the same formatting: (\w\s*)+\.
5. Keep generic "file not found" (ENOENT) errors as they are in PDB code. Previously, there used to be a custom enumeration for that purpose.
6. Remove a few extraneous LF in log() implementations. Printing LF is a responsability at a higher level, not at the error level.
Differential Revision: https://reviews.llvm.org/D51499
llvm-svn: 341228
This patch recognizes shuffles that shift elements and fill with zeros. I've copied and modified the shift matching code we use for normal vector registers to do this. I'm not sure if there's a good way to share more of this code without making the existing function more complex than it already is.
This will be used to enable kshift intrinsics in clang.
Differential Revision: https://reviews.llvm.org/D51401
llvm-svn: 341227
The presence of a ReadAdvance for input operand #0 is problematic
because it changes the input latency of the register used as the base address
for the folded load.
A broadcast cannot start executing if the load address hasn't been computed yet.
In the llvm-mca example, the VBROADCASTSS is dependent on the address generated
by the LEAQ. That means, it cannot start until LEAQ reaches the write-back
stage. If we apply ReadAdvance, then we wrongly assume that the load can start 3
cycles in advance.
Differential Revision: https://reviews.llvm.org/D51534
llvm-svn: 341222
The `mtc1` and `mfc1` definitions in the MipsInstrFPU.td have MMRel,
but do not have StdMMR6Rel tags. When these instructions are emitted
for microMIPS R6 targets, `Mips::MipsR62MicroMipsR6` nor
`Mips::Std2MicroMipsR6` cannot find correct op-codes and as a result the
backend uses mips32 variant of the instructions encoding.
The patch fixes this problem by adding the StdMMR6Rel tag and check
instructions encoding in the test case.
Differential revision: https://reviews.llvm.org/D51482
llvm-svn: 341221
The intention is to enable the extract_vector_elt load combine,
and doing this for other operations interferes with more
useful optimizations on vectors.
Handle any type of load since in principle we should do the
same combine for the various load intrinsics.
llvm-svn: 341219
According to the timeline view, sqrtss/sd/rcpss start executing before the load
address for the memory operand is available.
This problem is caused by the presence of a ReadAfterLd (a ReadAdvance). Those
unary operations should not specify a ReadAdvance at all.
llvm-svn: 341213
When using -g and -dsym, llvm-objdump opens the dsym file and keeps the
MachOObjectFile alive, while the memory buffer that the MachOObjectFile
was based on gets destroyed.
Differential Revision: https://reviews.llvm.org/D51365
llvm-svn: 341209
Nicola Zaghen