Add check for, and parsing of, .dwo files to Statistics.cpp; create a new getNon
SkeletonUnitDie function for DWARFUnit.h
Reviewers: dblaikie
Differential Revision: https://review.llvm.org/D61755
llvm-svn: 360380
This patch fixes PR41523
https://bugs.llvm.org/show_bug.cgi?id=41523
Regions can now nest/overlap provided that they have different names.
Anonymous regions cannot overlap.
Region end markers must specify the region name. The only exception is for when
there is only one user-defined region; in that particular case, the region end
marker doesn't need to specify a name.
Incorrect region end markers are no longer ignored. Instead, the tool reports an
error and we exit with an error code.
Added test cases to verify the new diagnostic error messages.
Updated the llvm-mca docs to reflect this feature change.
Differential Revision: https://reviews.llvm.org/D61676
llvm-svn: 360351
Summary:
The implementation is a pretty straightforward extension of the pattern
used for (de)serializing the ModuleList stream. Since there are other
streams which use the same format (MemoryList and MemoryList64, at
least). I tried to generalize the code a bit so that adding future
streams of this type can be done with less code.
Reviewers: amccarth, jhenderson, clayborg
Subscribers: markmentovai, lldb-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61423
llvm-svn: 360350
I've started this cleanup more several times now, but got sidetracked
elsewhere, e.g. by llvm-exegesis problems. Not this time, finally!
This is mainly cleaning up the inverse throughput values,
and a few latencies/uops, based on the llvm-exegesis measured values.
Though this is not complete by any means,
there's certainly more cleanup to be done.
The performance numbers (i've only checked by RawSpeed benchmark) aren't
really surprising - overall this *slightly* (< -1%) improves perf.
llvm-svn: 360341
This restores part of r359311 that was reverted by r359830.
Rewrite the symbol types to fix several issues.
Notable difference is that the type of __init_array_start changes from
't' to 'd'.
GNU nm used to mark ELF symbols relative to .init_array as 't'
https://sourceware.org/bugzilla/show_bug.cgi?id=24505 (before 2.33)
because ".init" is the prefix. The bug was copied by r287803.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D61551
llvm-svn: 360339
The VOP3 form should always be the preferred selection, to be shrunk
later. This should only be an optimization issue, but this partially
works around a problem from clobbering VCC when SIFixSGPRCopies
rewrites an SCC defining operation directly to VCC.
3 of the testcases are regressions from failing to fold the immediate
in cases it should. These can be avoided by improving the VCC liveness
handling in SIFoldOperands. Simply increasing the threshold to
computeRegisterLiveness works, although this is common enough that VCC
liveness should probably be tracked throughout the pass. The hack of
leaving behind an implicit_def instruction to avoid breaking iterator
wastes instruction count, which inhibits finding the VCC def in long
chains of adds. Doing this however exposes different, worse looking
regressions from poor scheduling behavior. This could probably be
avoided around by forcing the shrink of the addc here, but the
scheduler should probably be fixed.
The r600 add test needs to be split out because it asserts on the
arguments in the new test during the calling convention lowering.
llvm-svn: 360293
Prior to this patch, llvm-objcopy's error messages for archives with
unsupported members only mentioned the archive name, not the member
name, making them unhelpful. This change improves it by approximately
following GNU objcopy's error message syntax of
"<archive name>(<member name>): <problem>".
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D61674
llvm-svn: 360251
This patch adds support for --prefix-alloc-sections, which adds a prefix
to every allocated section names.
It adds a prefix after renaming section names by --rename-section as GNU
objcopy does.
Fixes PR41266: https://bugs.llvm.org/show_bug.cgi?id=41266
Differential Revision: https://reviews.llvm.org/D60042
Patch by Seiya Nuta.
llvm-svn: 360233
This fixes the https://bugs.llvm.org/show_bug.cgi?id=41355.
Previously with -r we printed relocation section name instead of the target section name.
It was like this: "RELOCATION RECORDS FOR [.rel.text]"
Now it is: "RELOCATION RECORDS FOR [.text]"
Also when relocation target section has more than one relocation section,
we did not combine the output. Now we do.
Differential revision: https://reviews.llvm.org/D61312
llvm-svn: 360143
In some cases it is useful to explicitly set symbol's st_name value.
For example, I am using it in a patch for LLD to remove the broken
binary from a test case and replace it with a YAML test.
Differential revision: https://reviews.llvm.org/D61180
llvm-svn: 360137
We require d/q suffixes on the memory form of these instructions to disambiguate the memory size.
We don't require it on the register forms, but need to support parsing both with and without it.
Previously we always printed the d/q suffix on the register forms, but it's redundant and
inconsistent with gcc and objdump.
After this patch we should support the d/q for parsing, but not print it when its unneeded.
llvm-svn: 360085
Summary:
This change enables `cl::Grouping` for short options --
options with names of a single character. This is consistent with GNU
getopt behavior.
Reviewers: rnk, MaskRay
Reviewed By: MaskRay
Subscribers: thopre, cfe-commits, MaskRay, rupprecht, hiraditya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D61270
llvm-svn: 359917
Patch adds support for dumping of file headers with llvm-readobj. XCOFF
object files are added to test dumping a well formed file, and dumping
both negative timestamps and negative symbol counts, both of which are
allowed in the XCOFF definition.
Differential Revision: https://reviews.llvm.org/D60878
llvm-svn: 359878
If certain switches are not specified, llvm-strip behaves as if
--strip-all were specified. This means that for testing, when we don't
want the stripping behaviour, we have to specify one of these switches,
which can be confusing. This change adds --no-strip-all to allow an
alternative way of suppressing the default stripping, in a less
confusing manner.
Reviewed by: jakehehrlich, MaskRay
Differential Revision: https://reviews.llvm.org/D61377
llvm-svn: 359781
Summary:
Triple components in `XFAIL` lines are tested against the target triple.
Various tests that are expected to fail on big-endian hosts are marked
as being `XFAIL` for big-endian targets. This patch corrects these tests
by having them test against a new `host-byteorder-big-endian` feature.
Reviewers: xingxue, sfertile, jasonliu
Reviewed By: xingxue
Subscribers: jvesely, nhaehnle, fedor.sergeev, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60551
llvm-svn: 359689
This improves readability and the behavior is consistent with GNU objdump.
The new test test/tools/llvm-objdump/X86/disassemble-section-name.s
checks we print newlines before and after "Disassembly of section ...:"
Differential Revision: https://reviews.llvm.org/D61127
llvm-svn: 359668
Previously we did not report this.
Also this removes multiple lookups in the map
what cleanups the code.
Differential revision: https://reviews.llvm.org/D61322
llvm-svn: 359663
-t is --symbols in llvm-readobj but --section-details (unimplemented) in readelf.
The confusing option should not be used since we aim for improving
compatibility.
Keep just one llvm-readobj -t use case in test/tools/llvm-readobj/symbols.test
llvm-svn: 359661
We use both -long-option and --long-option in tests. Switch to --long-option for consistency.
In the "llvm-readelf" mode, -long-option is discouraged as it conflicts with grouped short options and it is not accepted by GNU readelf.
While updating the tests, change llvm-readobj -s to llvm-readobj -S to reduce confusion ("s" is --section-headers in llvm-readobj but --symbols in llvm-readelf).
llvm-svn: 359649
GNU objcopy uses bfd_elf_get_default_section_type to decide the candidate section type,
which roughly translates to our [a] (I assume SEC_COMMON implies SHF_ALLOC):
(!(Sec.Flags & ELF::SHF_ALLOC) || Flags & (SectionFlag::SecContents | SectionFlag::SecLoad)))
Then, it updates the section type in bfd/elf.c:elf_fake_sections if:
if (this_hdr->sh_type == SHT_NULL)
this_hdr->sh_type = sh_type; // common case
else if (this_hdr->sh_type == SHT_NOBITS
&& sh_type == SHT_PROGBITS
&& (asect->flags & SEC_ALLOC) != 0) // uncommon case
...
this_hdr->sh_type = sh_type;
If the following condition is met the uncommon branch is executed:
if (elf_section_type (osec) == SHT_NULL
&& (osec->flags == isec->flags
|| (final_link
&& ((osec->flags ^ isec->flags)
& ~(SEC_LINK_ONCE | SEC_LINK_DUPLICATES | SEC_RELOC)) == 0)))
I suggest we just ignore this clause and follow the common case
behavior, which is done in this patch. Rationales to do so:
If --set-section-flags is a no-op (osec->flags == isec->flags)
(corresponds to the "readonly" test in set-section-flags.test), GNU
objcopy will require (Sec.Flags & ELF::SHF_ALLOC). [a] is essentially:
Flags & (SectionFlag::SecContents | SectionFlag::SecLoad)
This special case is not really useful. Non-SHF_ALLOC SHT_NOBITS
sections do not make much sense and it doesn't matter if they are
SHT_NOBITS or SHT_PROGBITS.
For all other RUN lines in set-section-flags.test, the new behavior
matches GNU objcopy, i.e. this patch improves compatibility.
Differential Revision: https://reviews.llvm.org/D60189
llvm-svn: 359639
Add overlap functionality to llvm-profdata tool to compute the similarity
between two profile files.
Differential Revision: https://reviews.llvm.org/D60977
llvm-svn: 359612
This is a fix for https://bugs.llvm.org/show_bug.cgi?id=41371.
Currently, it is possible to break the sh_link field of the dynamic relocation section
by removing the section it refers to. The patch fixes an issue and adds 2 test cases.
One of them shows that it does not seem possible to break the sh_info field.
I added an assert to verify this.
Differential revision: https://reviews.llvm.org/D60825
llvm-svn: 359552
This patch extends the `-bb` option to be able to use the group
extraction feature from the BlockExtractor.
In particular, `-bb=func:bb` is modified to support a list of basic
blocks per function: `-bb=func:bb1[;bb2...]` that will be extracted
together if at all possible (region must be single entry.)
Differential Revision: https://reviews.llvm.org/D60973
llvm-svn: 359464
In addition, fix and convert the two tests to yaml2obj based. This
allows us to delete two executables.
X86/weak.test: 'v' was not tested
X86/init-fini.test: symbol types of __bss_start _edata _end were wrong
GNU nm reports __init_array_start as 't', and __preinit_array_start as 'd'.
__init_array_start is 't' just because its section ".init_array" starts with ".init"
'd' makes more sense and allows us to drop the weird SHT_INIT_ARRAY rule.
So, change __init_array_start to 'd' instead.
llvm-svn: 359311
Summary:
llvm-{objcopy,strip} (and many other LLVM binary utilities) accept
cl::opt style -long-option as well as many short options (e.g. -p -S
-x). People who use them as replacement of GNU binutils often use the
grouped option syntax (POSIX Utility Conventions), e.g. -Sx => -S -x,
-Wd => -W -d, -sj.text => -s -j.text
There is ambiguity if a long option starts with the character used by a
short option. Drop the support for -long-option to resolve the ambiguity.
This divergence from other utilities is accepted (other utilities
continue supporting -long-option).
https://lists.llvm.org/pipermail/llvm-dev/2019-April/131786.html
Reviewers: alexshap, jakehehrlich, jhenderson, rupprecht, espindola
Reviewed By: jakehehrlich, jhenderson, rupprecht
Subscribers: grimar, emaste, arichardson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60439
llvm-svn: 359265
Adds a representation of the section header table to XCOFFObjectFile,
and implements enough to dump the section headers with llvm-obdump.
Differential Revision: https://reviews.llvm.org/D60784
llvm-svn: 359244
yaml2obj might crash on invalid input when unable to parse the YAML.
Recently a crash with a very similar nature was fixed for an empty files.
This patch revisits the fix and does it in yaml::Input instead.
It seems to be more correct way to handle such situation.
With that crash for invalid inputs is also fixed now.
Differential revision: https://reviews.llvm.org/D61059
llvm-svn: 359178
For well-known type IDs, include the name of the type.
To not duplicate the ID->name map, make llvm-readobj call this new
function as well. It has slightly different output, so this also
requires updating a few tests.
Differential Revision: https://reviews.llvm.org/D61086
llvm-svn: 359153
If two .res files contain the same resource, cvtres.exe (and hence
link.exe) reject the input with this message:
CVTRES : fatal error CVT1100: duplicate resource. type:STRING, name:101, language:0x0409
LINK : fatal error LNK1123: failure during conversion to COFF: file invalid or corrupt
llvm-cvtres (and lld-link) used to silently pick one of the duplicate
resources instead. This patch makes them report an error as well.
We slightly improve on cvtres by printing the name of two .res files
containing duplicate entries as well.
Differential Revision: https://reviews.llvm.org/D61049
llvm-svn: 359083
Caroline Tice