Subtractor relocation addends are signed, so we need to read them via signed
int pointers. Accidentally treating 32-bit addends as unsigned leads to
out-of-range errors when we try to add very large (>INT32_MAX) bogus addends.
llvm-svn: 360392
Adds full edge details (rather than just edge targets) when out-of-range errors
are generated. Also fixes a bug where debugging output accessed an invalidated
DenseMap iterator by moving the debugging output above the invalidation point.
llvm-svn: 360383
Commit r360221 ("[Support] Add error handling to
sys::Process::getPageSize().", 2019-05-08) seems to have missed these
uses of getPageSize(). Update them to getPageSizeEstimate().
llvm-svn: 360322
This patch changes the return type of sys::Process::getPageSize to
Expected<unsigned> to account for the fact that the underlying syscalls used to
obtain the page size may fail (see below).
For clients who use the page size as an optimization only this patch adds a new
method, getPageSizeEstimate, which calls through to getPageSize but discards
any error returned and substitues a "reasonable" page size estimate estimate
instead. All existing LLVM clients are updated to call getPageSizeEstimate
rather than getPageSize.
On Unix, sys::Process::getPageSize is implemented in terms of getpagesize or
sysconf, depending on which macros are set. The sysconf call is documented to
return -1 on failure. On Darwin getpagesize is implemented in terms of sysconf
and may also fail (though the manpage documentation does not mention this).
These failures have been observed in practice when highly restrictive sandbox
permissions have been applied. Without this patch, the result is that
getPageSize returns -1, which wreaks havoc on any subsequent code that was
assuming a sane page size value.
<rdar://problem/41654857>
Reviewers: dblaikie, echristo
Subscribers: kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59107
llvm-svn: 360221
This patch modifies MachOAtomGraphBuilder to use setLayoutNext rather than
addEdge, and fixes a bug in the section layout algorithm that could result in
atoms appearing more than once in the section ordering (which resulted in those
atoms being assigned invalid addresses during layout).
llvm-svn: 360205
The MachO .alt_entry directive is applied to a symbol to indicate that it is
locked (in terms of address layout and liveness) to its predecessor atom. I.e.
it is an alternate entry point, at a fixed offset, for the previous atom.
This patch updates MachOAtomGraphBuilder to check for the .alt_entry flag on
symbols and add a corresponding LayoutNext edge to the atom-graph. It also
updates MachOAtomGraphBuilder_x86_64 to generalize handling of the
X86_64_RELOC_SUBTRACTOR relocation: previously either the minuend or
subtrahend of the subtraction had to be the same as the atom being fixed up,
now it is only necessary for the minuend or subtrahend to be locked (via any
chain of alt_entry directives) to the atom being fixed up.
llvm-svn: 360194
These operations were already used in eh-frame registration, and are likely to
be used in other runtime registrations, so this commit moves them into a header
where they can be re-used.
llvm-svn: 359950
Clients who want to regain ownership of object buffers after they have been
linked may now use the NotifyEmitted callback for this purpose.
Note: Currently NotifyEmitted is only called if linking succeeds. If linking
fails the buffer is always discarded.
llvm-svn: 359735
JITLinkGeneric phases 2 and 3 (focused on applying fixups and finalizing memory,
respectively) may fail for various reasons. If this happens, we need to
explicitly de-allocate the memory allocated in phase 1 (explicitly, because
deallocation may also fail and so is implemented as a method returning error).
No testcase yet: I am still trying to decide on the right way to test totally
platform agnostic code like this.
llvm-svn: 359643
In-memory compiled object buffer identifiers will now be derived from the
identifiers of their source IR modules. This makes it easier to connect
in-memory objects with their source modules in debugging output.
llvm-svn: 359613
Background: A definition generator can be attached to a JITDylib to generate
new definitions in response to queries. For example: a generator that forwards
calls to dlsym can map symbols from a dynamic library into the JIT process on
demand.
If definition generation fails then the generator should be able to return an
error. This allows the JIT API to distinguish between the case where a
generator does not provide a definition, and the case where it was not able to
determine whether it provided a definition due to an error.
The immediate motivation for this is cross-process symbol lookups: If the
remote-lookup generator is attached to a JITDylib early in the search list, and
if a generator failure is misinterpreted as "no definition in this JITDylib" then
lookup may continue and bind to a different definition in a later JITDylib, which
is a bug.
llvm-svn: 359521
LLJITBuilder and LLLazyJITBuilder construct LLJIT and LLLazyJIT instances
respectively. Over time these will allow more configurable options to be
added while remaining easy to use in the default case, which for default
in-process JITing is now:
auto J = ExitOnErr(LLJITBuilder.create());
llvm-svn: 359511
ObjectLinkingLayer::Plugin provides event notifications when objects are loaded,
emitted, and removed. It also provides a modifyPassConfig callback that allows
plugins to modify the JITLink pass configuration.
This patch moves eh-frame registration into its own plugin, and teaches
llvm-jitlink to only add that plugin when performing execution runs on
non-Windows platforms. This should allow us to re-enable the test case that was
removed in r359198.
llvm-svn: 359357
When failing materialization of a symbol X, remove X from the dependants list
of any of X's dependencies. This ensures that when X's dependencies are
emitted (or fail themselves) they do not try to access the no-longer-existing
MaterializationInfo for X.
llvm-svn: 359252
Frame Descriptor Entries (FDEs) have a pointer back to a Common Information
Entry (CIE) that describes how the rest FDE should be parsed. JITLink had been
assuming that FDEs always referred to the most recent CIE encountered, but the
spec allows them to point back to any previously encountered CIE. This patch
fixes JITLink to look up the correct CIE for the FDE.
The testcase is a MachO binary with an FDE that refers to a CIE that is not the
one immediately proceeding it (the layout can be viewed wit
'dwarfdump --eh-frame <testcase>'. This test case had to be a binary as llvm-mc
now sorts FDEs (as of r356216) to ensure FDEs *do* point to the most recent CIE.
llvm-svn: 359105
Section atoms are not sorted, so we need to scan the whole section to find the
start address.
No test case: Found by inspection, and any reproduction would depend on pointer
ordering.
llvm-svn: 358865
The error check required FDEs to refer to the most recent CIE, but the eh-frame
spec allows them to refer to any previously seen CIE. This patch removes the
offending check.
llvm-svn: 358840
Knowing the address/symbolnum field values makes it easier to identify the
unsupported relocation, and provides enough information for the full bit
pattern of the relocation to be reconstructed.
llvm-svn: 358833
Summary:
JITLink is a jit-linker that performs the same high-level task as RuntimeDyld:
it parses relocatable object files and makes their contents runnable in a target
process.
JITLink aims to improve on RuntimeDyld in several ways:
(1) A clear design intended to maximize code-sharing while minimizing coupling.
RuntimeDyld has been developed in an ad-hoc fashion for a number of years and
this had led to intermingling of code for multiple architectures (e.g. in
RuntimeDyldELF::processRelocationRef) in a way that makes the code more
difficult to read, reason about, extend. JITLink is designed to isolate
format and architecture specific code, while still sharing generic code.
(2) Support for native code models.
RuntimeDyld required the use of large code models (where calls to external
functions are made indirectly via registers) for many of platforms due to its
restrictive model for stub generation (one "stub" per symbol). JITLink allows
arbitrary mutation of the atom graph, allowing both GOT and PLT atoms to be
added naturally.
(3) Native support for asynchronous linking.
JITLink uses asynchronous calls for symbol resolution and finalization: these
callbacks are passed a continuation function that they must call to complete the
linker's work. This allows for cleaner interoperation with the new concurrent
ORC JIT APIs, while still being easily implementable in synchronous style if
asynchrony is not needed.
To maximise sharing, the design has a hierarchy of common code:
(1) Generic atom-graph data structure and algorithms (e.g. dead stripping and
| memory allocation) that are intended to be shared by all architectures.
|
+ -- (2) Shared per-format code that utilizes (1), e.g. Generic MachO to
| atom-graph parsing.
|
+ -- (3) Architecture specific code that uses (1) and (2). E.g.
JITLinkerMachO_x86_64, which adds x86-64 specific relocation
support to (2) to build and patch up the atom graph.
To support asynchronous symbol resolution and finalization, the callbacks for
these operations take continuations as arguments:
using JITLinkAsyncLookupContinuation =
std::function<void(Expected<AsyncLookupResult> LR)>;
using JITLinkAsyncLookupFunction =
std::function<void(const DenseSet<StringRef> &Symbols,
JITLinkAsyncLookupContinuation LookupContinuation)>;
using FinalizeContinuation = std::function<void(Error)>;
virtual void finalizeAsync(FinalizeContinuation OnFinalize);
In addition to its headline features, JITLink also makes other improvements:
- Dead stripping support: symbols that are not used (e.g. redundant ODR
definitions) are discarded, and take up no memory in the target process
(In contrast, RuntimeDyld supported pointer equality for weak definitions,
but the redundant definitions stayed resident in memory).
- Improved exception handling support. JITLink provides a much more extensive
eh-frame parser than RuntimeDyld, and is able to correctly fix up many
eh-frame sections that RuntimeDyld currently (silently) fails on.
- More extensive validation and error handling throughout.
This initial patch supports linking MachO/x86-64 only. Work on support for
other architectures and formats will happen in-tree.
Differential Revision: https://reviews.llvm.org/D58704
llvm-svn: 358818
This patch reduces the number of functions in the interface between RuntimeDyld
and RuntimeDyldChecker by combining "GetXAddress" and "GetXContent" functions
into "GetXInfo" functions that return a struct describing both the address and
content. The GetStubOffset function is also replaced with a pair of utilities,
GetStubInfo and GetGOTInfo, that fit the new scheme. For RuntimeDyld both of
these functions will return the same result, but for the new JITLink linker
(https://reviews.llvm.org/D58704) these will provide the addresses of PLT stubs
and GOT entries respectively.
For JITLink's use, a 'got_addr' utility has been added to the rtdyld-check
language, and the syntax of 'got_addr' and 'stub_addr' has been changed: both
functions now take two arguments, a 'stub container name' and a target symbol
name. For llvm-rtdyld/RuntimeDyld the stub container name is the object file
name and section name, separated by a slash. E.g.:
rtdyld-check: *{8}(stub_addr(foo.o/__text, y)) = y
For the upcoming llvm-jitlink utility, which creates stubs on a per-file basis
rather than a per-section basis, the container name is just the file name. E.g.:
jitlink-check: *{8}(got_addr(foo.o, y)) = y
llvm-svn: 358295
Following r354972 the Intel JIT Listener would not report line table
information because the section indices did not match. There was
a similar issue with the PerfJitEventListener. This change performs
the section index lookup when building the object address used to
query the line table information.
Differential Revision: https://reviews.llvm.org/D59490
llvm-svn: 356895
When running lli --debug --force-interpreter=true the executed instructions are
printed but are missing newlines. This commit adds the missing newlines.
Patch by Andrew Brown.
Differential Revision: https://reviews.llvm.org/D57806
llvm-svn: 355587
This cleans up all LoadInst creation in LLVM to explicitly pass the
value type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57172
llvm-svn: 352911
This cleans up all CallInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57170
llvm-svn: 352909
ELF sections allow 0 for the alignment, which is specified to
be the same as 1. However many clients do not expect this and
will behave poorly in the presence of a 0-aligned section (for
example by trying to modulo something by the section alignment).
We can be more polite by making sure that we always pass a
non-zero value to clients.
Differential Revision: https://reviews.llvm.org/D57482
llvm-svn: 352694
This patch tried to address the following use case.
. bcc (https://github.com/iovisor/bcc) utilizes llvm JIT to
compile for BTF target.
. with -g, .BTF and .BTF.ext sections (BPF debug info)
will be generated by LLVM.
. .BTF does not have relocations and .BTF.ext has some
relocations.
. With ProcessAllSections, .BTF.ext is loaded by JIT dynamic linker
and is available to application. But .BTF is not loaded.
The bcc application needs both .BTF.ext and .BTF for debugging
purpose, and .BTF is not loaded. This patch addressed this issue
by iterating over all sections and loading any missing
sections, after symbol/relocation processing in loadObjectImpl().
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D55943
llvm-svn: 352432
Previously, MemoryBlock automatically extends a requested buffer size to a
multiple of page size because (I believe) doing it was thought to be harmless
and with that you could get more memory (on average 2KiB on 4KiB-page systems)
"for free".
That programming interface turned out to be error-prone. If you request N
bytes, you usually expect that a resulting object returns N for `size()`.
That's not the case for MemoryBlock.
Looks like there is only one place where we take the advantage of
allocating more memory than the requested size. So, with this patch, I
simply removed the automatic size expansion feature from MemoryBlock
and do it on the caller side when needed. MemoryBlock now always
returns a buffer whose size is equal to the requested size.
Differential Revision: https://reviews.llvm.org/D56941
llvm-svn: 351916
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Lang Hames