Modern PPC cores support a floating-point copysign instruction, and we can use
this to lower the FCOPYSIGN node (which is created from calls to the libm
copysign function). A couple of extra patterns are necessary because the
operand types of FCOPYSIGN need not agree.
llvm-svn: 188653
This patch provides basic support for powerpc64le as an LLVM target.
However, use of this target will not actually generate little-endian
code. Instead, use of the target will cause the correct little-endian
built-in defines to be generated, so that code that tests for
__LITTLE_ENDIAN__, for example, will be correctly parsed for
syntax-only testing. Code generation will otherwise be the same as
powerpc64 (big-endian), for now.
The patch leaves open the possibility of creating a little-endian
PowerPC64 back end, but there is no immediate intent to create such a
thing.
The LLVM portions of this patch simply add ppc64le coverage everywhere
that ppc64 coverage currently exists. There is nothing of any import
worth testing until such time as little-endian code generation is
implemented. In the corresponding Clang patch, there is a new test
case variant to ensure that correct built-in defines for little-endian
code are generated.
llvm-svn: 187179
This adds support for the basic mnemoics (with the L operand) for the
fixed-point compare instructions. These are defined as aliases for the
already existing CMPW/CMPD patterns, depending on the value of L.
This requires use of InstAlias patterns with immediate literal operands.
To make this work, we need two further changes:
- define a RegisterPrefix, because otherwise literals 0 and 1 would
be parsed as literal register names
- provide a PPCAsmParser::validateTargetOperandClass routine to
recognize immediate literals (like ARM does)
llvm-svn: 185826
This adds assembler parser support to the PowerPC back end.
The parser will run for any powerpc-*-* and powerpc64-*-* triples,
but was tested only on 64-bit Linux. The supported syntax is
intended to be compatible with the GNU assembler.
The parser does not yet support all PowerPC instructions, but
it does support anything that is generated by LLVM itself.
There is no support for testing restricted instruction sets yet,
i.e. the parser will always accept any instructions it knows,
no matter what feature flags are given.
Instruction operands will be checked for validity and errors
generated. (Error handling in general could still be improved.)
The patch adds a number of test cases to verify instruction
and operand encodings. The tests currently cover all instructions
from the following PowerPC ISA v2.06 Book I facilities:
Branch, Fixed-point, Floating-Point, and Vector.
Note that a number of these instructions are not yet supported
by the back end; they are marked with FIXME.
A number of follow-on check-ins will add extra features. When
they are all included, LLVM passes all tests (including bootstrap)
when using clang -cc1as as the system assembler.
llvm-svn: 181050
This is prep. work for the implementation of optimizeCompare. Many PPC
instructions have 'record' forms (in almost all cases, this means that the RC
bit is set) that cause the result of the instruction to be compared with zero,
and the result of that comparison saved in a predefined condition register. In
order to add the record forms of the instructions without too much
copy-and-paste, the relevant functions have been refactored into multiclasses
which define both the record and normal forms.
Also, two TableGen-generated mapping functions have been added which allow
querying the instruction code for the record form given the normal form (and
vice versa).
No functionality change intended.
llvm-svn: 179356
When unsafe FP math operations are enabled, we can use the fre[s] and
frsqrte[s] instructions, which generate reciprocal (sqrt) estimates, together
with some Newton iteration, in order to quickly generate floating-point
division and sqrt results. All of these instructions are separately optional,
and so each has its own feature flag (except for the Altivec instructions,
which are covered under the existing Altivec flag). Doing this is not only
faster than using the IEEE-compliant fdiv/fsqrt instructions, but allows these
computations to be pipelined with other computations in order to hide their
overall latency.
I've also added a couple of missing fnmsub patterns which turned out to be
missing (but are necessary for good code generation of the Newton iterations).
Altivec needs a similar fix, but that will probably be more complicated because
fneg is expanded for Altivec's v4f32.
llvm-svn: 178617
The P7 and A2 have additional floating-point conversion instructions which
allow a direct two-instruction sequence (plus load/store) to convert from all
combinations (signed/unsigned i32/i64) <--> (float/double) (on previous cores,
only some combinations were directly available).
llvm-svn: 178480
This instruction is available on modern PPC64 CPUs, and is now used
to improve the SINT_TO_FP lowering (by eliminating the need for the
separate sign extension instruction and decreasing the amount of
needed stack space).
llvm-svn: 178446
These instructions are available on the P5x (and later) and on the A2. They
implement the standard floating-point rounding operations (floor, trunc, etc.).
One caveat: frin (round to nearest) does not implement "ties to even", and so
is only enabled in fast-math mode.
llvm-svn: 178337
These are 64-bit load/store with byte-swap, and available on the P7 and the A2.
Like the similar instructions for 16- and 32-bit words, these are matched in the
target DAG-combine phase against load/store-bswap pairs.
llvm-svn: 178276
PPC ISA 2.06 (P7, A2, etc.) has a popcntd instruction. Add this instruction and
tell TTI about it so that popcount-loop recognition will know about it.
llvm-svn: 178233
This is the first commit of a large series which will add support for the
QPX vector instruction set to the PowerPC backend. This instruction set is
used on the IBM Blue Gene/Q supercomputers.
llvm-svn: 173973
POWER4 is a 64-bit CPU (better matched to the 970).
The g3 is really the 750 (no altivec), the g4+ is the 74xx (not the 750).
Patch by Andreas Tobler.
llvm-svn: 158363
The PPC target feature gpul (IsGigaProcessor) was only used for one thing:
To enable the generation of the MFOCRF instruction. Furthermore, this
instruction is available on other PPC cores outside of the G5 line. This
feature now corresponds to the HasMFOCRF flag.
No functionality change.
llvm-svn: 158323
This adds a full itinerary for IBM's PPC64 A2 embedded core. These
cores form the basis for the CPUs in the new IBM BG/Q supercomputer.
llvm-svn: 153842
When a target instruction wants to set target-specific flags, it should simply
set bits in the TSFlags bit vector defined in the Instruction TableGen class.
This works well because TableGen resolves member references late:
class I : Instruction {
AddrMode AM = AddrModeNone;
let TSFlags{3-0} = AM.Value;
}
let AM = AddrMode4 in
def ADD : I;
TSFlags gets the expected bits from AddrMode4 in this example.
llvm-svn: 100384
1. Use flags on the instructions in the .td file to indicate the PPC970 unit
type instead of a table in the .cpp file. Much cleaner.
2. Change the hazard recognizer to build d-groups according to the actual
algorithm used, not my flawed understanding of it.
3. Model "must be in the first slot" and "must be the only instr in a group"
accurately.
llvm-svn: 26719
Hal Finkel