Summary:
If the driver is only given -msoft-float/-mfloat-abi=soft or -msingle-float,
we should refrain from propagating -mfpxx, unless it was explicitly given on the
command line.
Reviewers: atanasyan, dsanders
Reviewed By: atanasyan, dsanders
Subscribers: cfe-commits, mpf
Differential Revision: http://reviews.llvm.org/D10387
llvm-svn: 239818
We used to have a flag to enable module maps, and two more flags to enable
implicit module maps. This is all redundant; we don't need any flag for
enabling module maps in the abstract, and we don't usually have -fno- flags for
-cc1. We now have just a single flag, -fimplicit-module-maps, that enables
implicitly searching the file system for module map files and loading them.
The driver interface is unchanged for now. We should probably rename
-fmodule-maps to -fimplicit-module-maps at some point.
llvm-svn: 239789
This patch adds the -fsanitize=safe-stack command line argument for clang,
which enables the Safe Stack protection (see http://reviews.llvm.org/D6094
for the detailed description of the Safe Stack).
This patch is our implementation of the safe stack on top of Clang. The
patches make the following changes:
- Add -fsanitize=safe-stack and -fno-sanitize=safe-stack options to clang
to control safe stack usage (the safe stack is disabled by default).
- Add __attribute__((no_sanitize("safe-stack"))) attribute to clang that can be
used to disable the safe stack for individual functions even when enabled
globally.
Original patch by Volodymyr Kuznetsov and others at the Dependable Systems
Lab at EPFL; updates and upstreaming by myself.
Differential Revision: http://reviews.llvm.org/D6095
llvm-svn: 239762
LLVM does not and has not ever supported a soft-float ABI mode on
Sparc, so don't pretend that it does.
Also switch the default from "soft-float" -- which was actually
hard-float because soft-float is unimplemented -- to hard-float.
Differential Revision: http://reviews.llvm.org/D10457
llvm-svn: 239755
GCC allows case-insensitive values for -mcpu, -march and -mtune options.
This patch implements the same behaviour for the -mcpu option for the AArch64 target.
llvm-svn: 239619
GCC allows case-insensitive values for -mcpu, -march and -mtune options.
This patch implements the same behaviour for the -march option for ARM.
llvm-svn: 239527
Summary: We already pass these to the IAS, but not to GAS.
Reviewers: dsanders, atanasyan
Reviewed By: atanasyan
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10358
llvm-svn: 239525
CodeGenOptions and onto the PassManagerBuilder. This enables gating
the new EliminateAvailableExternally module pass on whether we are
preparing for LTO.
If we are preparing for LTO (e.g. a -flto -c compile), the new pass is not
included as we want to preserve available externally functions for possible
link time inlining.
llvm-svn: 239481
Encoding the version into the triple will allow us to communicate to
LLVM what functions it can expect to depend upon in the implementation.
llvm-svn: 239273
The main effect of this is to fix anomalies where certain -mfpu options didn't
disable everything that they should causing strange behaviour when combined
with -mcpu or -march values that themselves enabled fpu subtarget features,
e.g. -mfpu=fpv5-dp-d16 with -march=armv7em previously behaved the same as
-mfpu=fpv5-sp-d16 due to fp-only-sp not being disabled.
Invalid -mfpu options now also give an error, which is consistent with the
handling of the .fpu directive.
Differential Revision: http://reviews.llvm.org/D10239
llvm-svn: 239152
GCC allows case-insensitive values for -mcpu, -march and -mtune options.
This patch implements the same behaviour for the -mcpu option.
llvm-svn: 239059
If the type isn't trivially moveable emplace can skip a potentially
expensive move. It also saves a couple of characters.
Call sites were found with the ASTMatcher + some semi-automated cleanup.
memberCallExpr(
argumentCountIs(1), callee(methodDecl(hasName("push_back"))),
on(hasType(recordDecl(has(namedDecl(hasName("emplace_back")))))),
hasArgument(0, bindTemporaryExpr(
hasType(recordDecl(hasNonTrivialDestructor())),
has(constructExpr()))),
unless(isInTemplateInstantiation()))
No functional change intended.
llvm-svn: 238601
getCanonicalArchName can return an empty string for an architecture
that is well-formed but meaningless. Use parseArch to determine if
it's actually valid or not.
Differential Revision: http://reviews.llvm.org/D10120
llvm-svn: 238553
This isn't an actual revert of r237769, it just restores the behavior of
the Clang driver prior to it while completely re-implementing how that
behavior works.
This also re-does the work of making the default OpenMP runtime
selectable at CMake (or configure) time to work in the way all of our
other such hooks do (config.h, configure and cmake hooks, etc.).
I've re-implemented how we manage the '-fopenmp' flagset in an important
way. Now, the "default" hook just makes '-fopenmp' equivalent to
'-fopenmp=<default>' rather than a separate special beast. Also, there
is an '-fno-openmp' flag which does the obvious thing. Also, the code is
shared between all the places to select a known OpenMP runtime and act
on it.
Finally, and most significantly, I've taught the driver to inspect the
selected runtime when choosing whether to propagate the '-fopenmp' flag
to the frontend in the CC1 commandline. Without this, it isn't possible
to use Clang with libgomp, even if you were happy with the serial,
boring way in which it worked previously (ignoring all #pragmas but
linking in the library to satisfy direct calls into the runtime).
While I'm here, I've gone ahead and sketched out a path for the future
name of LLVM's OpenMP runtime (libomp) and the legacy support for its
current name (libiomp5) in what seems a more reasonable way.
To re-enable LLVM's OpenMP runtime (which I think should wait until the
normal getting started instructions are a reasonable way for falks to
check out, build, and install Clang with the runtime) all that needs to
change is the default string in the CMakeLists.txt and configure.ac
file. No code changes necessary.
I also added a test for the driver's behavior around OpenMP since it was
*completely missing* previously. Makes it unsurprising that we got it
wrong.
llvm-svn: 238389
Using the target cpu to determine some behaviour is sprinkled in
several places in the driver, but in almost all the information that
is needed can be found in the triple. Restructure things so that the
triple is used, and the cpu is only used if the exact cpu name is
needed.
Also add a check that the -mcpu argument is valid, and correct the
-march argument checking so that it handles -march=native correctly. I
would have liked to move these checks into the computation of the
triple, but the triple is calculated several times in several places
and that would lead to multiple error messages for the same thing.
Differential Revision: http://reviews.llvm.org/D9879
llvm-svn: 237894
-fopenmp turns on OpenMP support and links libiomp5 as OpenMP library. Also there is -fopenmp={libiomp5|libgomp} option that allows to override effect of -fopenmp and link libgomp library (if -fopenmp=libgomp is specified).
Differential Revision: http://reviews.llvm.org/D9736
llvm-svn: 237769
sys/time.h on Solaris (and possibly other systems) defines "SEC" as "1"
using a cpp macro. The result is that this fails to compile.
Fixes https://llvm.org/PR23482
llvm-svn: 237113
Compiler-rt's Profiling library isn't part of the stdlib, so -nostdlib
shouldn't prevent it from being linked. This makes Darwin behave like
other toolchains, and link in the profile runtime irrespective of
-nostdlib, since the resulting program can't be run unless you link
this.
I've also added a test to show that other toolchains already behave
like this.
llvm-svn: 237074
This is a starting point for using the TargetParser in Clang, in a simple
enough part of the code that can be used without disrupting the crazy
platform support that we need to be compatible with other toolchains.
Also adding a few FIXME on obvious places that need replacing, but those
cases will indeed break a few of the platform assumptions, as arch/cpu names
change multiple times in the driver.
Finally, I'm changing the "neon-vfpv3" behaviour to match standard NEON, since
-mfpu=neon implies vfpv3 by default in both Clang and LLVM. That option
string is still supported as an alias to "neon".
llvm-svn: 236901
GCC allows case-insensitive values for -mcpu, -march and -mtune options.
This patch implements the same behaviour for the -mcpu option.
Patch by Gabor Ballabas.
llvm-svn: 236859
llvm::Triple::getARMCPUForArch now returns nullptr for invalid -march
values, instead of silently translating it to arm7tdmi. Use this to
give an error message, which is consistent with how gcc behaves.
Differential Revision: http://reviews.llvm.org/D9602
llvm-svn: 236846
This patch adds support for the z13 architecture type. For compatibility
with GCC, a pair of options -mvx / -mno-vx can be used to selectively
enable/disable use of the vector facility.
When the vector facility is present, we default to the new vector ABI.
This is characterized by two major differences:
- Vector types are passed/returned in vector registers
(except for unnamed arguments of a variable-argument list function).
- Vector types are at most 8-byte aligned.
The reason for the choice of 8-byte vector alignment is that the hardware
is able to efficiently load vectors at 8-byte alignment, and the ABI only
guarantees 8-byte alignment of the stack pointer, so requiring any higher
alignment for vectors would require dynamic stack re-alignment code.
However, for compatibility with old code that may use vector types, when
*not* using the vector facility, the old alignment rules (vector types
are naturally aligned) remain in use.
These alignment rules are not only implemented at the C language level,
but also at the LLVM IR level. This is done by selecting a different
DataLayout string depending on whether the vector ABI is in effect or not.
Based on a patch by Richard Sandiford.
llvm-svn: 236531
Toma Tabacu