Summary:
Patch https://reviews.llvm.org/D44467 implements conversion of invalid
vmov instructions into valid ones. It turned out that some valid
instructions also get converted, for example
vmov.i64 d2, #0xff00ff00ff00ff00 ->
vmov.i16 d2, #0xff00
Such behavior is incorrect because according to the ARM ARM section
F2.7.7 Modified immediate constants in T32 and A32 Advanced SIMD
instructions, "On assembly, the data type must be matched in the table
if possible."
This patch fixes the isNEONmovReplicate check so that the above
instruction is not modified any more.
Reviewers: rengolin, olista01
Reviewed By: rengolin
Subscribers: javed.absar, kristof.beyls, rogfer01, llvm-commits
Differential Revision: https://reviews.llvm.org/D44678
llvm-svn: 329158
Summary:
[llvm-exegesis][RFC] Automatic Measurement of Instruction Latency/Uops
This is the code corresponding to the RFC "llvm-exegesis Automatic Measurement of Instruction Latency/Uops".
The RFC is available on the LLVM mailing lists as well as the following document
for easier reading:
https://docs.google.com/document/d/1QidaJMJUyQdRrFKD66vE1_N55whe0coQ3h1GpFzz27M/edit?usp=sharing
Subscribers: mgorny, gchatelet, orwant, llvm-commits
Differential Revision: https://reviews.llvm.org/D44519
llvm-svn: 329156
These both use a 16-bit load, but one used loadi16_anyext and the other used extloadi32i16. The only difference between them is that loadi16_anyext checked that the load was at least 2 byte aligned and non-volatile. But the alignment doesn't matter here. Just use extloadi32i16 for both.
llvm-svn: 329154
Previously UnaryTransformType nodes were comparing the same node
for structural equivalence. This was due to a typo where T1 was
on both sides of the comparison. This patch corrects that typo.
Unfortunately I couldn't find a way to test this change. It seems
that currently UnaryTransform nodes are never actually checked
for equivalence, only their canonical types are.
None the less, this correction seemed appropriate.
llvm-svn: 329151
This patch teaches SCEV how to prove implications for SCEVUnknown nodes that are Phis.
If we need to prove `Pred` for `LHS, RHS`, and `LHS` is a Phi with possible incoming values
`L1, L2, ..., LN`, then if we prove `Pred` for `(L1, RHS), (L2, RHS), ..., (LN, RHS)` then we can also
prove it for `(LHS, RHS)`. If both `LHS` and `RHS` are Phis from the same block, it is sufficient
to prove the predicate for values that come from the same predecessor block.
The typical case that it handles is that we sometimes need to prove that `Phi(Len, Len - 1) >= 0`
given that `Len > 0`. The new logic was added to `isImpliedViaOperations` and only uses it and
non-recursive reasoning to prove the facts we need, so it should not hurt compile time a lot.
Differential Revision: https://reviews.llvm.org/D44001
Reviewed By: anna
llvm-svn: 329150
This patch does some housekeeping for the new <version> header.
It adds it to the module.modulemap, and the double_include.sh.cpp test.
Additionally it corrects the // UNSUPPORTED options for the libc++
specific test. The header needs to compile under C++03 to support
modules, and it should compile under all available compilers.
llvm-svn: 329144
GLIBC 2.27 changed the locale data for fr_FR and ru_RU. In particular
they change the decimal and thousands separators used. This patch
makes the locale tests tolerate the updated locales.
llvm-svn: 329143
Summary:
Currently merge conditional stores can't handle cases where PostBB (the block we need to move the store to) has more than 2 predecessors.
This patch removes that restriction by creating a new block with only the 2 predecessors we care about and an unconditional branch to the original block. This provides a place to put the store.
Reviewers: efriedma, jmolloy, ABataev
Reviewed By: efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39760
llvm-svn: 329142
The test additions in r329110 are Darwin-specific, as they rely
on a code path that is reachabled when driver is invoked without
-target. Instead of making the old test checks Darwin-specific too,
let's simply split it into two files to ensure that the old
checks are still platform-agnostic. Thanks Chandler for
suggesting this!
llvm-svn: 329141
Summary:
The ShadowCallStack pass instruments functions marked with the
shadowcallstack attribute. The instrumented prolog saves the return
address to [gs:offset] where offset is stored and updated in [gs:0].
The instrumented epilog loads/updates the return address from [gs:0]
and checks that it matches the return address on the stack before
returning.
Reviewers: pcc, vitalybuka
Reviewed By: pcc
Subscribers: cryptoad, eugenis, craig.topper, mgorny, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D44802
llvm-svn: 329139
This commit is similar to r329120, but uses the existing getUsesRedZone() function
in X86MachineFunctionInfo. This teaches the outliner to look at whether or not a
function *truly* uses a redzone instead of just the noredzone attribute on a
function.
Thus, after this commit, it's possible to outline from x86 without using
-mno-red-zone and still get outlining results.
This also adds a new test for the new redzone behaviour.
llvm-svn: 329134
Summary: There are no packed instructions for min3 or max3. So, performMinMaxCombine should not optimize vectors of f16 to min3/max3.
Author: FarhanaAleen
Reviewed By: arsenm
Subscribers: llvm-commits, AMDGPU
Differential Revision: https://reviews.llvm.org/D45219
llvm-svn: 329131
identifier.
This patch fixes a few places in CGObjCMac.cpp where the class
identifier was used instead of the name specified by objc_runtime_name.
rdar://problem/37910822
Differential Revision: https://reviews.llvm.org/D45101
llvm-svn: 329128
We were already performing checks on non-template variables,
but the checks on templated ones were missing.
Differential Revision: https://reviews.llvm.org/D45231
llvm-svn: 329127
LLVM Bug Id : 36449
Revision 328563 caused tests to fail under python 3.
This patch modified cat.py file to support both python 2 and 3.
This patch also fixes CRLF issues on Windows.
Patch by Chamal de Silva
Differential Revision: https://reviews.llvm.org/D45077
llvm-svn: 329123
Summary:
Add support for the -fsanitize=shadow-call-stack flag which causes clang
to add ShadowCallStack attribute to functions compiled with that flag
enabled.
Reviewers: pcc, kcc
Reviewed By: pcc, kcc
Subscribers: cryptoad, cfe-commits, kcc
Differential Revision: https://reviews.llvm.org/D44801
llvm-svn: 329122
The tests marked with 'FIXME' require loosening the check
in SimplifyAssociativeOrCommutative() to optimize completely;
that's still checking isFast() in Instruction::isAssociative().
llvm-svn: 329121
This patch adds a hasRedZone() function to AArch64MachineFunctionInfo. It
returns true if the function is known to use a redzone, false if it is known
to not use a redzone, and no value otherwise.
This removes the requirement to pass -mno-red-zone when outlining for AArch64.
https://reviews.llvm.org/D45189
llvm-svn: 329120
In the lld perf builder r328686 had a negative impact in
stalled-cycles-frontend. Somehow that stat is not showing on my
machine, but the attached patch shows an improvement on cache-misses,
which is probably a reasonable proxy.
My working theory is that given a large input the pieces vector is out
of cache by the time initOffsetMap runs.
Both finalizeContents implementation have a convenient location for
initializing the OffsetMap, so this seems the best solution.
llvm-svn: 329117
The linkage type on outlined functions was private before. This meant that if
you set a breakpoint in an outlined function, the debugger wouldn't be able to
give a sane name to the outlined function.
This commit changes the linkage type to internal and updates any tests that
relied on the prefixes on the names of outlined functions.
llvm-svn: 329116
Summary:
If an alloca need to be stored in the coroutine frame and it has an alignment specified and the alignment does not match the natural alignment of the alloca type. Insert appropriate padding into the coroutine frame to make sure that it gets requested alignment.
For example for a packet type (which natural alignment is 1), but alloca alignment is 8, we may need to insert a padding field with required number of bytes to make sure it is properly aligned.
```
%PackedStruct = type <{ i64 }>
...
%data = alloca %PackedStruct, align 8
```
If the previous field in the coroutine frame had alignment 2, we would have [6 x i8] inserted before %PackedStruct in the coroutine frame:
```
%f.Frame = type { ..., i16, [6 x i8], %PackedStruct }
```
Reviewers: rnk, lewissbaker, modocache
Reviewed By: modocache
Subscribers: EricWF, llvm-commits
Differential Revision: https://reviews.llvm.org/D45221
llvm-svn: 329112
It also updates test/Transforms/LoopInterchange/call-instructions.ll
to use accesses where we can prove dependence after D35430.
Reviewers: sebpop, karthikthecool, blitz.opensource
Reviewed By: sebpop
Differential Revision: https://reviews.llvm.org/D45206
llvm-svn: 329111
Summary:
Introduce the ShadowCallStack function attribute. It's added to
functions compiled with -fsanitize=shadow-call-stack in order to mark
functions to be instrumented by a ShadowCallStack pass to be submitted
in a separate change.
Reviewers: pcc, kcc, kubamracek
Reviewed By: pcc, kcc
Subscribers: cryptoad, mehdi_amini, javed.absar, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D44800
llvm-svn: 329108
George Rimar