This is a temporary work-around to get our all-annotations-all-flags
stress testing effort run clean. In the long run, we want to provide
efficient implementations of strided loads and stores though
Reviewed By: bixia
Differential Revision: https://reviews.llvm.org/D98563
Functions used only in `assert` cause warnings in release mode
Reviewed By: mehdi_amini, dcaballe, ftynse
Differential Revision: https://reviews.llvm.org/D98476
NestedPattern uses a BumpPtrAllocator to store child (nested) pattern
objects to decrease the overhead of dynamic allocation. This assumes all
allocations happen inside the allocator that will be freed as a whole.
However, NestedPattern contains `std::function` as a member, which
allocates internally using `new`, unaware of the BumpPtrAllocator. Since
NestedPattern only holds pointers to the nested patterns allocated in
the BumpPtrAllocator, it never calls their destructors, so the
destructor of the `std::function`s they contain are never called either,
leaking the allocated memory.
Make NestedPattern explicitly call destructors of nested patterns. This
additionally requires to actually copy the nested patterns in
copy-construction and copy-assignment instead of just sharing the
pointer to the arena-allocated list of children to avoid double-free. An
alternative solution would be to add reference counting to the list of
arena-allocated list of children.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D98485
Forward references to blocks lead to `Block`s being allocated in the
parser, but they are not necessarily included into a region if parsing
fails, leading to a leak. Clean them up in parser destructor.
Reviewed By: rriddle, mehdi_amini
Differential Revision: https://reviews.llvm.org/D98403
This restricts the attributes to integers for constants of type
IndexType. So far an attribute like StringAttr as in
%c1 = constant "" : index
is valid.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D98216
This patch introduces progressive lowering patterns for rewriting
vector.transfer_read/write to vector.load/store and vector.broadcast
in certain supported cases.
Reviewed By: dcaballe, nicolasvasilache
Differential Revision: https://reviews.llvm.org/D97822
This patch adds support for vectorizing loops with 'iter_args' when those loops
are not a vector dimension. This allows vectorizing outer loops with an inner
'iter_args' loop (e.g., reductions). Vectorizing scenarios where 'iter_args'
loops are vector dimensions would require more work (e.g., analysis,
generating horizontal reduction, etc.) not included in this patch.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D97892
This patch replaces the root-terminal vectorization approach implemented in the
Affine vectorizer with a topological order approach that vectorizes all the
operations within the target loop nest. These are the most important changes
introduced by the new algorithm:
* Removed tracking of root and terminal ops. Existing vectorization
functionality is preserved and extended so that loop nests without
root-terminal chains can be vectorized.
* Vectorizing a loop nest now only requires a single topological traversal.
* A new vector loop nest is incrementally built along the vectorization
process. The original scalar loop is kept intact. No cloning guard is needed
to recover the scalar loop if vectorization fails. This approach also
simplifies the challenging task of replacing a loop operation amid the
vectorization process without invalidating the analysis information that
depends on the original loop.
* Vectorization of specific operations has been implemented as independent,
preparing them to be moved to a potential vectorization interface.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D97442
This allows for storage instances to store data that isn't uniqued in the context, or contain otherwise non-trivial logic, in the rare situations that they occur. Storage instances with trivial destructors will still have their destructor skipped. A consequence of this is that the storage instance definition must be visible from the place that registers the type.
Differential Revision: https://reviews.llvm.org/D98311
This patch fixes a heap-use-after-free introduced by the recent changes
in the vectorizer: https://reviews.llvm.org/rG95db7b4aeaad590f37720898e339a6d54313422f
The problem is due to the way candidate loops are visited. All candidate loops
are pattern-matched beforehand using the 'NestedMatch' utility. These matches may
intersect with each other so it may happen that we try to vectorize a loop that
was previously vectorized. The new vectorization algorithm replaces the original
loops that are vectorized with new loops and, therefore, any reference to the
original loops in the pre-computed matches becomes invalid.
This patch fixes the problem by classifying the candidate matches into buckets
before vectorization. Each bucket contains all the matches that intersect. The
vectorizer uses these buckets to make sure that we only vectorize *one* match from
each bucket, at most.
Differential Revision: https://reviews.llvm.org/D98382
For the use in LLVMOps.td I used the getPointerElementType()
escape hatch, as it's not obvious to me how the load type
should be properly obtained here.
Data layout information allows to answer questions about the size and alignment
properties of a type. It enables, among others, the generation of various
linear memory addressing schemes for containers of abstract types and deeper
reasoning about vectors. This introduces the subsystem for modeling data
layouts in MLIR.
The data layout subsystem is designed to scale to MLIR's open type and
operation system. At the top level, it consists of attribute interfaces that
can be implemented by concrete data layout specifications; type interfaces that
should be implemented by types subject to data layout; operation interfaces
that must be implemented by operations that can serve as data layout scopes
(e.g., modules); and dialect interfaces for data layout properties unrelated to
specific types. Built-in types are handled specially to decrease the overall
query cost.
A concrete default implementation of these interfaces is provided in the new
Target dialect. Defaults for built-in types that match the current behavior are
also provided.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D97067
verifyCompatibleShapes is not transitive. Create an n-ary version and
update SameOperandShapes and SameOperandAndResultShapes traits to use
it.
Differential Revision: https://reviews.llvm.org/D98331
If MLIR_CUDA_RUNNER_ENABLED, register a 'gpu-to-cubin' conversion pass to mlir-opt.
The next step is to switch CUDA integration tests from mlir-cuda-runner to mlir-opt + mlir-cpu-runner and remove mlir-cuda-runner.
Depends On D98279
Reviewed By: herhut, rriddle, mehdi_amini
Differential Revision: https://reviews.llvm.org/D98203
The current implementation has some inefficiencies that become noticeable when running on large modules. This revision optimizes the code, and updates some out-dated idioms with newer utilities. The main components of this optimization include:
* Add an overload of Block::eraseArguments that allows for O(N) erasure of disjoint arguments.
* Don't process entry block arguments given that we don't erase them at this point.
* Don't track individual operation results, given that we don't erase them. We can just track the parent operation.
Differential Revision: https://reviews.llvm.org/D98309
This patch adds support for vectorizing loops with 'iter_args' when those loops
are not a vector dimension. This allows vectorizing outer loops with an inner
'iter_args' loop (e.g., reductions). Vectorizing scenarios where 'iter_args'
loops are vector dimensions would require more work (e.g., analysis,
generating horizontal reduction, etc.) not included in this patch.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D97892
This patch replaces the root-terminal vectorization approach implemented in the
Affine vectorizer with a topological order approach that vectorizes all the
operations within the target loop nest. These are the most important changes
introduced by the new algorithm:
* Removed tracking of root and terminal ops. Existing vectorization
functionality is preserved and extended so that loop nests without
root-terminal chains can be vectorized.
* Vectorizing a loop nest now only requires a single topological traversal.
* A new vector loop nest is incrementally built along the vectorization
process. The original scalar loop is kept intact. No cloning guard is needed
to recover the scalar loop if vectorization fails. This approach also
simplifies the challenging task of replacing a loop operation amid the
vectorization process without invalidating the analysis information that
depends on the original loop.
* Vectorization of specific operations has been implemented as independent,
preparing them to be moved to a potential vectorization interface.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D97442
Link `MLIRStandardToLLVM` to `MLIRAVX512Transforms`, since
the latter uses `LLVMTypeConverter` defined in the first one.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D98336
The dialect separation was introduced to demarkate ops operating in different
type systems. This is no longer the case after the LLVM dialect has migrated to
using built-in vector types, so the original reason for separation is no longer
valid. Squash the two dialects into one.
The code size decrease isn't quite large: the ops originally in LLVM_AVX512 are
preserved because they match LLVM IR intrinsics specialized for vector element
bitwidth. However, it is still conceptually beneficial to have only one
dialect. I originally considered to use Tablegen multiclasses to define both
the type-polymorphic op and its two intrinsic-related instantiations, but
decided against it given both the complexity of the required Tablegen input and
its dissimilarity with the rest of ODS-defined ops, both potentially resulting
in very poor maintainability.
Depends On D98327
Reviewed By: nicolasvasilache, springerm
Differential Revision: https://reviews.llvm.org/D98328
It is to use the methods in LinalgInterfaces.cpp for additional static shape verification to match the shaped operands and loop on linalgOps. If I used the existing methods, I would face circular dependency linking issue. Now we can use them as methods of LinalgOp.
Reviewed By: hanchung
Differential Revision: https://reviews.llvm.org/D98163
Instead of configuring kernel-to-cubin/rocdl lowering through callbacks, introduce a base class that target-specific passes can derive from.
Put the base class in GPU/Transforms, according to the discussion in D98203.
The mlir-cuda-runner will go away shortly, and the mlir-rocdl-runner as well at some point. I therefore kept the existing code path working and will remove it in a separate step.
Depends On D98168
Reviewed By: herhut
Differential Revision: https://reviews.llvm.org/D98279
Based on the following discussion:
https://llvm.discourse.group/t/rfc-memref-memory-shape-as-attribute/2229
The goal of the change is to make memory space property to have more
expressive representation, rather then "magic" integer values.
It will allow to have more clean ASM form:
```
gpu.func @test(%arg0: memref<100xf32, "workgroup">)
// instead of
gpu.func @test(%arg0: memref<100xf32, 3>)
```
Explanation for `Attribute` choice instead of plain `string`:
* `Attribute` classes allow to use more type safe API based on RTTI.
* `Attribute` classes provides faster comparison operator based on
pointer comparison in contrast to generic string comparison.
* `Attribute` allows to store more complex things, like structs or dictionaries.
It will allows to have more complex memory space hierarchy.
This commit preserve old integer-based API and implements it on top
of the new one.
Depends on D97476
Reviewed By: rriddle, mehdi_amini
Differential Revision: https://reviews.llvm.org/D96145
This method allows for removing multiple disjoint operands at once, reducing the need to erase operands individually (which results in shifting the operand list).
Differential Revision: https://reviews.llvm.org/D98290
This class provides efficient implementations of symbol queries related to uses, such as collecting the users of a symbol, replacing all uses, etc. This provides similar benefits to use related queries, as SymbolTableCollection did for lookup queries.
Differential Revision: https://reviews.llvm.org/D98071
Provide default for gpuBinaryAnnotation so that we don't need to specify it in tests.
The annotation likely only needs to be target specific if we want to lower to e.g. both CUDA and ROCDL.
Reviewed By: herhut, bondhugula
Differential Revision: https://reviews.llvm.org/D98168
This allows the caller to distinguish between a parse error or an
unmatched keyword. It fixes the redundant error that was emitted by the
caller when the generated parser would fail.
Differential Revision: https://reviews.llvm.org/D98162
Instead of storing an array of LoopOpt attributes, which were just
wrapping std::pair<enum, int> anyway, we can have an attribute storing
a sorted ArrayRef<std::pair<enum, int>> as a single unit. This improves
here the textual format and the general API. Note that we're limiting
the options to fit into an int64_t by design, but this isn't a new
constraint.
Building the LoopOptions attribute is likely worth a specific builder
for efficient reason, that'll be the subject of a future patch.
Differential Revision: https://reviews.llvm.org/D98105
This makes it easy to compose the distribution computation with
other affine computations.
Reviewed By: mravishankar
Differential Revision: https://reviews.llvm.org/D98171
Move Target/LLVMIR.h to target/LLVMIR/Import.h to better reflect the purpose of
this file. Also move all LLVM IR target tests under the LLVMIR directory.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D98178
Return the vectorization results using a vector passed by reference instead of returning them embedded in a structure.
Differential Revision: https://reviews.llvm.org/D98182
* Only leaf packages are non-namespace packages. This allows most of the top levels to be split into different directories or deployment packages. In the previous state, the presence of __init__.py files at each level meant that the entire tree could only ever exist in one physical directory on the path.
* This changes the API usage slightly: `import mlir` will no longer do a deep import of `mlir.ir`, etc. This may necessitate some client code changes.
* Dialect gen code was restructured so that the user is responsible for providing the `my_dialect.py` file, which then must import its peer `_my_dialect_ops_gen`. This gives complete control of the dialect namespace to the user instead of to tablegen code, allowing further dialect-specific python APIs.
* Correspondingly, the previous extension modules `_my_dialect.py` are now `_my_dialect_ops_ext.py`.
* Now that the `linalg` namespace is open, moved the `linalg_opdsl` tool into it.
* This may require some corresponding downstream adjustments to npcomp, circt, et al:
* Probably some shallow imports need to be converted to deep imports (i.e. not `import mlir` brings in the world).
* Each tablegen generated dialect now needs an explicit `foo.py` which does a `from ._foo_ops_gen import *`. This is similar to the way that generated code operates in the C++ world.
* If providing dialect op extensions, those need to be moved from `_foo.py` -> `_foo_ops_ext.py`.
Differential Revision: https://reviews.llvm.org/D98096
This is using the new Attribute storage generation support in
TableGen to define the LLVM FastMathFlags.
Differential Revision: https://reviews.llvm.org/D98007
This will allow for removing the duplicated type documentation from LangRef and instead link to the builtin dialect documentation.
Differential Revision: https://reviews.llvm.org/D98093
Lowerings for min, max, prod, and sum reduction operations on int and float
values. This includes reduction tests for both cases.
Reviewed By: mravishankar
Differential Revision: https://reviews.llvm.org/D97893
split_at can return an error if the split index is out of bounds. If the
user knows that the index can never be out of bounds it's safe to use
extent tensors. This has a straight-forward lowering to std.subtensor.
Differential Revision: https://reviews.llvm.org/D98177
To unify the naming scheme across all ops in the SPIR-V dialect, we are
moving from spv.camelCase to spv.CamelCase everywhere. For ops that
don't have a SPIR-V spec counterpart, we use spv.mlir.snake_case.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D98014
Normally tensors will be stored in buffers before converting to SPIR-V,
given that is how a large amount of data is sent to the GPU. However,
SPIR-V supports converting from tensors directly too. This is for the
cases where the tensor just contains a small amount of elements and it
makes sense to directly inline them as a small data array in the shader.
To handle this, internally the conversion might create new local
variables. SPIR-V consumers in GPU drivers may or may not optimize that
away. So this has implications over register pressure. Therefore, a
threshold is used to control when the patterns should kick in.
Reviewed By: ThomasRaoux
Differential Revision: https://reviews.llvm.org/D98052
The two dialects are largely redundant. The former was introduced as a mirror
of the latter operating on LLVM dialect types. This is no longer necessary
since the LLVM dialect operates on built-in types. Combine the two dialects.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D98060
With the new vector.load/store operations, there is no need to go through
unmasked transfer operations (which will canonicalized to l/s anyway).
Reviewed By: dcaballe
Differential Revision: https://reviews.llvm.org/D98056
This patch is a follow-up on D97217. It adds a new 'Skip' result to the Operation visitor
so that a callback can stop the ongoing visit of an operation/block/region and
continue visiting the next one without fully interrupting the walk. Skipping is
needed to be able to erase an operation/block in pre-order and do not continue
visiting the internals of that operation/block.
Related to the skipping mechanism, the patch also introduces the following changes:
* Added new TestIRVisitors pass with basic testing for the IR visitors.
* Fixed missing early increment ranges in visitor implementation.
* Updated documentation of walk methods to include erasure information and walk
order information.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D97820
This patch extends the Region, Block and Operation visitors to also support pre-order walks.
We introduce a new template argument that dictates the walk order (only pre-order and
post-order are supported for now). The default order for Regions, Blocks and Operations is
post-order. Mixed orders (e.g., Region/Block pre-order + Operation post-order) could easily
be implemented, as shown in NumberOfExecutions.cpp.
Reviewed By: rriddle, frgossen, bondhugula
Differential Revision: https://reviews.llvm.org/D97217
In .mlir modules with larges amounts of attributes, e.g. a function with a larger number of argument attributes, the string comparison filtering greatly affects compile time. This revision switches to using a SmallDenseSet in these situations, resulting in over a 10x speed up in some situations.
Differential Revision: https://reviews.llvm.org/D97980
To unify the naming scheme across all ops in the SPIR-V dialect,
we are moving from spv.camelCase to spv.CamelCase everywhere.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D97918
* Mostly imported from experimental repo as-is with cosmetic changes.
* Temporarily left out emission code (for building ops at runtime) to keep review size down.
* Documentation and lit tests added fresh.
* Sample op library that represents current Linalg named ops included.
Differential Revision: https://reviews.llvm.org/D97995
Reduction updates should be masked, just like the load and stores.
Note that alternatively, we could use the fact that masked values are
zero of += updates and mask invariants to get this working but that
would not work for *= updates. Masking the update itself is cleanest.
This change also replaces the constant mask with a broadcast of "true"
since this constant folds much better for various folding patterns.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D98000
Canonicalize the iter_args of an scf::ForOp that involve a tensor_load and
for which only the last loop iteration is actually visible outside of the
loop. The canonicalization looks for a pattern such as:
```
%t0 = ... : tensor_type
%0 = scf.for ... iter_args(%bb0 : %t0) -> (tensor_type) {
...
// %m is either tensor_to_memref(%bb00) or defined above the loop
%m... : memref_type
... // uses of %m with potential inplace updates
%new_tensor = tensor_load %m : memref_type
...
scf.yield %new_tensor : tensor_type
}
```
`%bb0` may have either 0 or 1 use. If it has 1 use it must be exactly a
`%m = tensor_to_memref %bb0` op that feeds into the yielded `tensor_load`
op.
If no aliasing write of `%new_tensor` occurs between tensor_load and yield
then the value %0 visible outside of the loop is the last `tensor_load`
produced in the loop.
For now, we approximate the absence of aliasing by only supporting the case
when the tensor_load is the operation immediately preceding the yield.
The canonicalization rewrites the pattern as:
```
// %m is either a tensor_to_memref or defined above
%m... : memref_type
scf.for ... { // no iter_args
... // uses of %m with potential inplace updates
}
%0 = tensor_load %m : memref_type
```
Differential revision: https://reviews.llvm.org/D97953
To unify the naming scheme across all ops in the SPIR-V dialect, we are
moving from spv.camelCase to spv.CamelCase everywhere.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D97919
To unify the naming scheme across all ops in the SPIR-V dialect, we are
moving from `spv.camelCase` to `spv.CamelCase` everywhere.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D97917
To unify the naming scheme across all ops in the SPIR-V dialect, we are
moving from spv.camelCase to spv.CamelCase everywhere.
Differential Revision: https://reviews.llvm.org/D97920
Now that attributes can be generated using ODS, we can move the builtin attributes as well. This revision removes a majority of the builtin attributes with a few left for followup revisions. The attributes moved to ODS in this revision are: AffineMapAttr, ArrayAttr, DictionaryAttr, IntegerSetAttr, StringAttr, SymbolRefAttr, TypeAttr, and UnitAttr.
Differential Revision: https://reviews.llvm.org/D97591
The value type of the attribute can be specified by either overriding the typeBuilder field on the AttrDef, or by providing a parameter of type `AttributeSelfTypeParameter`. This removes the need to define custom storage class constructors for attributes that have a value type other than NoneType.
Differential Revision: https://reviews.llvm.org/D97590
This function simplifies calling the getChecked methods on Attributes and Types from within the parser, and removes any need to use `getEncodedSourceLocation` for these methods (by using an SMLoc instead). This is much more efficient than using an mlir::Location, as the encoding process to produce an mlir::Location is inefficient and undesirable for parsing (locations used during parsing should not persist afterwards unless otherwise necessary).
Differential Revision: https://reviews.llvm.org/D97900
`tensor_load(tensor_to_memref(x)) -> x` is an incorrect folding because it ignores potential aliasing.
This revision approximates no-aliasing by restricting the folding to occur only when tensor_to_memref
is immediately preceded by tensor_load in the same block. This is a conservative step back towards
correctness until better alias analysis becomes available.
Context: https://llvm.discourse.group/t/properly-using-bufferization-related-passes/2913/6
Differential Revision: https://reviews.llvm.org/D97957
Add a folder to rewrite a sequence such as:
```
%t1 = ...
%v = vector.transfer_read %t0[%c0...], {masked = [false...]} :
tensor<static_sizesxf32>, vector<static_sizesxf32>
%t2 = vector.transfer_write %v, %t1[%c0...] {masked = [false...]} :
vector<static_sizesxf32>, tensor<static_sizesxf32>
```
into:
```
%t0
```
The producer of t1 may or may not be DCE'd depending on whether it is a
block argument or has side effects.
Differential revision: https://reviews.llvm.org/D97934
There is no need for the interface implementations to be exposed, opaque
registration functions are sufficient for all users, similarly to passes.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D97852
Add a Loop Option attribute and generate llvm metadata attached to
branch instructions to control code generation.
Reviewed By: ftynse, mehdi_amini
Differential Revision: https://reviews.llvm.org/D96820
Found with exhaustive testing, it is possible that a while loop
appears in between chainable for loops. As long as we don't
scalarize reductions in while loops, this means we need to
terminate the chain at the while. This also refactors the
reduction code into more readable helper methods.
Reviewed By: bixia
Differential Revision: https://reviews.llvm.org/D97886
The support for attributes closely maps that of Types (basically 1-1) given that Attributes are defined in exactly the same way as Types. All of the current ODS TypeDef classes get an Attr equivalent. The generation of the attribute classes themselves share the same generator as types.
Differential Revision: https://reviews.llvm.org/D97589
This better matches the actual IR concept that is being modeled, and is consistent with how the rest of PDL is structured.
Differential Revision: https://reviews.llvm.org/D95718
This type represents a range of positional values. It will be used in followup revisions to add support for variadic constructs to PDL, such as operand and result ranges.
Differential Revision: https://reviews.llvm.org/D95717
The current implementation of Value involves a pointer int pair with several different kinds of owners, i.e. BlockArgumentImpl*, Operation *, TrailingOpResult*. This design arose from the desire to save memory overhead for operations that have a very small number of results (generally 0-2). There are, unfortunately, many problematic aspects of the current implementation that make Values difficult to work with or just inefficient.
Operation result types are stored as a separate array on the Operation. This is very inefficient for many reasons: we use TupleType for multiple results, which can lead to huge amounts of memory usage if multi-result operations change types frequently(they do). It also means that simple methods like Value::getType/Value::setType now require complex logic to get to the desired type.
Value only has one pointer bit free, severely limiting the ability to use it in things like PointerUnion/PointerIntPair. Given that we store the kind of a Value along with the "owner" pointer, we only leave one bit free for users of Value. This creates situations where we end up nesting PointerUnions to be able to use Value in one.
As noted above, most of the methods in Value need to branch on at least 3 different cases which is both inefficient, possibly error prone, and verbose. The current storage of results also creates problems for utilities like ValueRange/TypeRange, which want to efficiently store base pointers to ranges (of which Operation* isn't really useful as one).
This revision greatly simplifies the implementation of Value by the introduction of a new ValueImpl class. This class contains all of the state shared between all of the various derived value classes; i.e. the use list, the type, and the kind. This shared implementation class provides several large benefits:
* Most of the methods on value are now branchless, and often one-liners.
* The "kind" of the value is now stored in ValueImpl instead of Value
This frees up all of Value's pointer bits, allowing for users to take full advantage of PointerUnion/PointerIntPair/etc. It also allows for storing more operation results as "inline", 6 now instead of 2, freeing up 1 word per new inline result.
* Operation result types are now stored in the result, instead of a side array
This drops the size of zero-result operations by 1 word. It also removes the memory crushing use of TupleType for operations results (which could lead up to hundreds of megabytes of "dead" TupleTypes in the context). This also allowed restructured ValueRange, making it simpler and one word smaller.
This revision does come with two conceptual downsides:
* Operation::getResultTypes no longer returns an ArrayRef<Type>
This conceptually makes some usages slower, as the iterator increment is slightly more complex.
* OpResult::getOwner is slightly more expensive, as it now requires a little bit of arithmetic
From profiling, neither of the conceptual downsides have resulted in any perceivable hit to performance. Given the advantages of the new design, most compiles are slightly faster.
Differential Revision: https://reviews.llvm.org/D97804
The SubTensorInsertOp has a requirement that dest type and result
type match. Just folding the tensor.cast operation violates this and
creates verification errors during canonicalization. Also fix other
canonicalization methods that werent inserting casts properly.
Differential Revision: https://reviews.llvm.org/D97800
This offers the ability to create a JIT and invoke a function by passing
ctypes pointers to the argument and the result.
Differential Revision: https://reviews.llvm.org/D97523
This adds minimalistic bindings for the execution engine, allowing to
invoke the JIT from the C API. This is still quite early and
experimental and shouldn't be considered stable in any way.
Differential Revision: https://reviews.llvm.org/D96651
This gets rid of a dubious shape_eq %a, %a fold, that folds shape_eq
even if %a is not an Attribute.
Differential Revision: https://reviews.llvm.org/D97728
Use `StringLiteral` for function return type if it is known to return
constant string literals only.
This will make it visible to API users, that such values can be safely
stored, since they refers to constant data, which will never be deallocated.
`StringRef` is general is not safe to store for a long term,
since it might refer to temporal data allocated in heap.
Add `inline` and `constexpr` methods support to `OpMethod`.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D97390
Some elementwise operations are not scalarizable, vectorizable, or tensorizable.
Split `ElementwiseMappable` trait into the following, more precise traits.
- `Elementwise`
- `Scalarizable`
- `Vectorizable`
- `Tensorizable`
This allows for reuse of `Elementwise` in dialects like HLO.
Differential Revision: https://reviews.llvm.org/D97674
This patch continues detensorizing implementation by detensoring
internal control flow in functions.
In order to detensorize functions, all the non-entry block's arguments
are detensored and branches between such blocks are properly updated to
reflect the detensored types as well. Function entry block (signature)
is left intact.
This continues work towards handling github/google/iree#1159.
Reviewed By: silvas
Differential Revision: https://reviews.llvm.org/D97148
Just a pure method renaming.
It is a preparation step for replacing "memory space as raw integer"
with more generic "memory space as attribute", which will be done in
separate commit.
The `MemRefType::getMemorySpace` method will return `Attribute` and
become the main API, while `getMemorySpaceAsInt` will be declared as
deprecated and will be replaced in all in-tree dialects (also in separate
commits).
Reviewed By: mehdi_amini, rriddle
Differential Revision: https://reviews.llvm.org/D97476
Add canonicalizers to subtensor_insert operations need canonicalizers
that propagate the constant arguments within offsets, sizes and
strides. Also add pattern to propogate tensor_cast operations.
Differential Revision: https://reviews.llvm.org/D97704
These warnings are raised when compiling with gcc due to either having too few or too many commas, or in the case of lldb, the possibility of a nullptr.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D97586
Lowers the transpose operation to a generic linalg op when permutations
is a constant value.
Reviewed By: mravishankar
Differential Revision: https://reviews.llvm.org/D97508
Aart Bik