That is, remove many of the calls to Type::getNumContainedTypes(),
Type::subtypes(), and Type::getContainedType(N).
I'm not intending to remove these accessors -- they are
useful/necessary in some cases. However, removing the pointee type
from pointers would potentially break some uses, and reducing the
number of calls makes it easier to audit.
llvm-svn: 350835
This further improves compatibility with GNU as, allowing input such as the
following to be assembled:
.equ CONST, 0x123456
li a0, CONST
addi a0, a0, %lo(CONST)
.equ CONST, 1
slli a0, a0, CONST
Note that we don't have perfect compatibility with gas, as it will avoid
emitting a relocation in this case:
addi a0, a0, %lo(CONST2)
.equ CONST2, 0x123456
Thanks to Shiva Chen for suggesting a better way to approach this during review.
Differential Revision: https://reviews.llvm.org/D52298
llvm-svn: 350831
When we use the partial-matching function on a 128-bit chunk, we must
account for the possibility that we've matched undef halves of the
original source vectors, so the outputs may need to be reset.
This should allow closing PR40243:
https://bugs.llvm.org/show_bug.cgi?id=40243
llvm-svn: 350830
This is a partial fix for:
https://bugs.llvm.org/show_bug.cgi?id=40243
...as seen in the integer test, we still need to correct the result when using the
existing (old) horizontal op matching function because it does not model the way
x86 256-bit horizontal ops return results (each 128-bit half is its own horizontal-op).
A potential follow-up change for that is discussed in the bug report - see also D56490.
This generally duplicates a lot of the existing matching code, but we can't just remove
that without introducing regressions, so the existing code is renamed and used less often.
Follow-ups may try to reduce that overlap.
Differential Revision: https://reviews.llvm.org/D56450
llvm-svn: 350826
Summary:
This patch changes the legalization action for some half-precision floating-
point vector intrinsics (FSIN, FLOG, etc.) from Promote to Expand. These ops
are not supported in hardware for half-precision vectors, but promotion is
not always possible (for v8f16 operands). Changing the action to Expand fixes
an assertion failure in the legalizer when the frontend produces such ops.
In addition, a quick microbenchmark shows that, in the v4f16 case,
expanding introduces fewer spills and is therefore slightly faster than
promoting.
Reviewers: t.p.northover, SjoerdMeijer
Reviewed By: SjoerdMeijer
Subscribers: javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D56296
llvm-svn: 350825
This is https://bugs.llvm.org/show_bug.cgi?id=37151,
GNU objdump spec says that "Normally the disassembly output will skip blocks of zeroes.",
but currently, llvm-objdump prints them.
The patch implements the -z/--disassemble-zeroes option and switches the default to always
skip blocks of zeroes.
Differential revision: https://reviews.llvm.org/D56083
llvm-svn: 350823
See https://bugs.llvm.org/show_bug.cgi?id=40070.
GNU addr2line accepts input addresses both on the command-line and via
stdin. llvm-symbolizer previously only supported the latter. This
change adds support for the former. As with addr2line, the new
behaviour is to only look for addresses on stdin if no positional
arguments were provided to llvm-symbolizer.
Reviewed by: ruiu
Differential Revision: https://reviews.llvm.org/D56272
llvm-svn: 350821
Field ResourceUnitMask was incorrectly defined as a 'const unsigned' mask. It
should have been a 64 bit quantity instead. That means, ResourceUnitMask was
always implicitly truncated to a 32 bit quantity.
This issue has been found by inspection. Surprisingly, that bug was latent, and
it never negatively affected any existing upstream targets.
This patch fixes the wrong definition of ResourceUnitMask, and adds a bunch of
extra debug prints to help debugging potential issues related to invalid
processor resource masks.
llvm-svn: 350820
Allow to specify loop-unrolling with optional parameters explicitly
spelled out in -passes pipeline specification.
Introducing somewhat generic way of specifying parameters parsing via
FUNCTION_PASS_PARAMETRIZED pass registration.
Syntax of parametrized unroll pass name is as follows:
'unroll<' parameter-list '>'
Where parameter-list is ';'-separate list of parameter names and optlevel
optlevel: 'O[0-3]'
parameter: { 'partial' | 'peeling' | 'runtime' | 'upperbound' }
negated: 'no-' parameter
Example:
-passes=loop(unroll<O3;runtime;no-upperbound>)
this invokes LoopUnrollPass configured with OptLevel=3,
Runtime, no UpperBound, everything else by default.
llvm-svn: 350808
Add t2TEQrr to the map of instructions with can be reduced down into
a T1 instruction. This is a special case because TEQ just sets the
CPSR and doesn't write to a GPR, which is not the case for EOR. So,
we need to ensure that the EOR can write to the first operand.
Differential Revision: https://reviews.llvm.org/D56255
llvm-svn: 350801
Summary:
This pass replaces GR8/GR16/GR32/GR64 with their equivalent sized mask register classes. But VK32/VK64 aren't legal without AVX512BW. Apparently this mostly appears to work if the register coalescer is able to remove the VK32/VK64 register class reference. Or if we don't ever spill it. But there's no guarantee of that.
Another Intel employee managed to trigger a crash due to this with ISPC. Unfortunately, I've lost the test case he sent me at the time. I'm trying to get him to reproduce it for me. I'd like to get this in before 8.0 branches since its a little scary.
The regressions here are unfortunate, but I think we can make some improvements to DAG combine, load folding, etc. to fix them. Just not sure if we can get that done for 8.0.
Fixes PR39741
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56460
llvm-svn: 350800
Summary:
D55896 and D56029 add support to emit fixups for :abs_g0: , :abs_g1_s: , etc.
This patch adds the necessary enums and MCExpr needed for lowering these.
Reviewers: rnk, mstorsjo, efriedma
Reviewed By: efriedma
Subscribers: javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D56037
llvm-svn: 350798
This is a second attempt at r350778, which was reverted in
r350789. The only change is that the unimplemented-simd128 feature has
been renamed simd128-unimplemented, since naming it
unimplemented-simd128 somehow made the simd128 feature flag enable the
unimplemented-simd128 feature on Windows.
llvm-svn: 350791
Summary:
If we don't reset the optimized value O for access A, even though A is no longer optimized to O, A will still show up in that O's users list.
This fails verification when hoisting a Def outside a loop, even though the updates are correct.
The reason is that the phi in the loop header still find as user the hoisted def, because the Def has a pointer to the Phi in its optimized operand.
Reviewers: george.burgess.iv
Subscribers: sanjoy, jlebar, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D56467
llvm-svn: 350783
Found while trying to figure out why my second version of D56421 worked better than the first version. We weren't deleting the vselect in a timely fashion and that caused SimplfyDemandedBit to see an additional user.
The new version doesn't have this problem so this fix isn't needed there, but seemed like the right thing to do.
llvm-svn: 350781
Summary:
This replaces the old ad-hoc -wasm-enable-unimplemented-simd
flag. Also makes the new unimplemented-simd128 feature imply the
simd128 feature.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits, alexcrichton
Differential Revision: https://reviews.llvm.org/D56501
llvm-svn: 350778
The C standard says "The memchr function locates the first
occurrence of c (converted to an unsigned char)[...]". The expansion
was missing the conversion to unsigned char.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39041 .
Differential Revision: https://reviews.llvm.org/D55947
llvm-svn: 350775
When a null terminator is required and the file size is a multiple of the system page size, MemoryBuffer will prefer pread() over mmap(), which can result in excessive memory usage.
Patch by Mike Hommey!
Differential Revision: https://reviews.llvm.org/D56475
llvm-svn: 350774
Summary:
Looks like many passes print its pass description as a debug message at
the start of each pass, so added that to (mostly newly added) other
passes as well.
Reviewers: dschuff
Subscribers: jgravelle-google, sbc100, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D56142
llvm-svn: 350771
Summary:
Instead of using two separate callbacks to return the entry count and the
relative block frequency, use a single callback to return callsite
count. This would allow better supporting hybrid mode in the future as
the count of callsite need not always be derived from entry count (as in
sample PGO).
Reviewers: davidxl
Subscribers: mehdi_amini, steven_wu, dexonsmith, dang, llvm-commits
Differential Revision: https://reviews.llvm.org/D56464
llvm-svn: 350755
If the caller's return type does not have a zeroext attribute but the
callee does a tail call zeroext, we won't consider the tail call during
CodeGenPrepare because the attributes don't match.
However, if the result of the tail call has no uses, it makes sense to
drop the sext/zext attributes.
Differential Revision: https://reviews.llvm.org/D56486
llvm-svn: 350753
Summary: All a non-default title for the debugging this debugging aide
Reviewers: twoh, Kader, modocache
Reviewed By: twoh
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56499
llvm-svn: 350749
Summary:
For some reason the backend assumed that the condition mask would be
the first argument to the LLVM intrinsic, but everywhere else the
condition mask is the third argument.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D56412
llvm-svn: 350746
On AIX, attempting (without root) to set the sticky bit on a file with
the `chmod` utility will give:
```
chmod: not all requested changes were made to <file>
```
The same occurs when modifying other permission bits on a file with the
sticky bit already set.
It seems that the `chmod` function will report success despite failing
to set the sticky bit.
llvm-svn: 350735
NVPTX format requires that no labels/label arithmetics is used in the
debug info sections. To avoid possible problems with the adding/modifying the debug info functionality, made these tests more strict.
llvm-svn: 350731
This is an initial implementation for Speculative Load Hardening for
AArch64. It builds on top of the recently introduced
AArch64SpeculationHardening pass.
This doesn't implement (yet) some of the optimizations implemented for
the X86SpeculativeLoadHardening pass. I thought introducing the
optimizations incrementally in follow-up patches should make this easier
to review.
Differential Revision: https://reviews.llvm.org/D55929
llvm-svn: 350729
When GNU objdump dumps the input with -d it prints the symbol addresses,
for example:
0000000000000031 <foo>:
31: 00 00 add %al,(%rax)
...
llvm-objdump currently does not do that.
Patch changes the behavior to match the GNU objdump.
That is useful for implementing -z/--disassemble-zeroes (D56083),
it allows omitting first zero bytes and keep the information
about the symbol address in the output.
Differential revision: https://reviews.llvm.org/D56123
llvm-svn: 350726
Fixed issue with identity values and other cases, f32/f16 identity values to be added later. fma/mac instructions is disabled for now.
Test is fully reworked, added comments. Other fixes:
1. dpp move with uses and old reg initializer should be in the same BB.
2. bound_ctrl:0 is only considered when bank_mask and row_mask are fully enabled (0xF). Othervise the old register value is checked for identity.
3. Added add, subrev, and, or instructions to the old folding function.
4. Kill flag is cleared for the src0 (DPP register) as it may be copied into more than one user.
Differential revision: https://reviews.llvm.org/D55444
llvm-svn: 350721
Follow up patch of rL350385, for adding predres
command line option. This patch renames the
feature as to keep it aligned with the option
passed by/to clang
Differential Revision: https://reviews.llvm.org/D56484
llvm-svn: 350702
Summary:
This fixes PR39710. In that case we emitted a location list looking like
this:
.Ldebug_loc0:
.quad .Lfunc_begin0-.Lfunc_begin0
.quad .Lfunc_begin0-.Lfunc_begin0
.short 1 # Loc expr size
.byte 85 # DW_OP_reg5
.quad .Lfunc_begin0-.Lfunc_begin0
.quad .Lfunc_end0-.Lfunc_begin0
.short 1 # Loc expr size
.byte 85 # super-register DW_OP_reg5
.quad 0
.quad 0
As seen, the first entry's beginning and ending addresses evalute to 0,
which meant that the entry inadvertently became an "end of list" entry,
resulting in the location list ending sooner than expected.
To fix this, omit all entries with empty ranges. Location list entries
with empty ranges do not have any effect, as specified by DWARF, so we
might as well drop them:
"A location list entry (but not a base address selection or end of list
entry) whose beginning and ending addresses are equal has no effect
because the size of the range covered by such an entry is zero."
Reviewers: davide, aprantl, dblaikie
Reviewed By: aprantl
Subscribers: javed.absar, JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D55919
llvm-svn: 350698
Current strategy of dropping `InstructionPrecedenceTracking` cache is to
invalidate the entire basic block whenever we change its contents. In fact,
`InstructionPrecedenceTracking` has 2 internal strictures: `OrderedInstructions`
that is needed to be invalidated whenever the contents changes, and the map
with first special instructions in block. This second map does not need an
update if we add/remove a non-special instuction because it cannot
affect the contents of this map.
This patch changes API of `InstructionPrecedenceTracking` so that it now
accounts for reasons under which we invalidate blocks. This should lead
to much less recalculations of the map and should save us some compile time
because in practice we don't typically add/remove special instructions.
Differential Revision: https://reviews.llvm.org/D54462
Reviewed By: efriedma
llvm-svn: 350694
Most significantly, this makes bin/llvm-lit executable so that it
can be run in the usual way.
Differential Revision: https://reviews.llvm.org/D56423
llvm-svn: 350688
When the result type is v2i64/v2f64 and the index element size is i32, the index vector has two unused elements making the type v4i32. The mask VT should match the number of memory accesses that will be made.
This is consistent with the isel patterns used for the target independent gather/scatter intrinsic.
llvm-svn: 350687
Convert the output of "git rev-parse --short HEAD" to a string before
substituting it into the output file. Without this the output file
will look like this on Python 3:
#define LLVM_REVISION "git-b'6a4895a025f'"
Differential Revision: https://reviews.llvm.org/D56459
llvm-svn: 350686
Bad machine code: Illegal virtual register for instruction
function: TestULE
basic block: %bb.0 entry (0x1000a39b158)
instruction: %2:crrc = FCMPUD %1:vsfrc, %3:f8rc
operand 1: %1:vsfrc
Fix assert about missing match between fcmp instruction and register class.
We should use vsx related cmp instruction xvcmpudp instead of fcmpu when vsx is opened.
add -verifymachineinstrs option into related test cases to enable the verify pass.
Differential Revision: https://reviews.llvm.org/D55686
llvm-svn: 350685
This removes check for single use from general ShrinkDemandedConstant
to the BE because of the AArch64 regression after D56289/rL350475.
After several hours of experiments I did not come up with a testcase
failing on any other targets if check is not performed.
Moreover, direct call to ShrinkDemandedConstant is not really needed
and superceed by SimplifyDemandedBits.
Differential Revision: https://reviews.llvm.org/D56406
llvm-svn: 350684
Currently it's possible for following
check on V.WriteLanes (which is not really meaningful
during SubRangeJoin) to pass for one half of the pair,
and then fall through to to one of the impossible
or unresolved states. This then fails as inconsistent
on the other half.
During the main range join, the check between V.WriteLanes
and OtherV.ValidLanes must have passed, meaning this
should be a CR_Replace.
Fixes most of the testcases in bugs 39542 and 39602
llvm-svn: 350678
We can't go back and recover the lanes if it turns
out the implicit_def really can't be erased.
Assume all lanes are valid if an unresolved conflict
is encountered. There aren't any tests where this
seems to matter either way, but this seems like a
safer option.
Fixes bug 39602
llvm-svn: 350676
This patch improves llvm-profdata show command:
(1) add -value-cutoff=<N> option: Show only those functions whose max count
values are greater or equal to N.
(2) add -list-below-cutoff option: Only output names of functions whose max
count value are below the cutoff.
(3) formats value-profile counts and prints out percentage.
Differential Revision: https://reviews.llvm.org/D56342
llvm-svn: 350673
This is matching the equivalent of the DAG expansion,
so it should never end up with worse perf than the
original code even if the target doesn't have a rotate
instruction.
llvm-svn: 350672
In LTO or Thin-lto mode (though linker plugin), the module
names are of temp file names which are different for
different compilations. Using SourceFileName avoids the issue.
This should not change any functionality for current PGO as
all the current callers of getPGOFuncName() is before LTO.
Differential Revision: https://reviews.llvm.org/D56327
llvm-svn: 350671
Summary:
StoreResults pass does not optimize store instructions anymore because
store instructions don't return results values anymore. Now this pass is
used solely for memory intrinsics, so update the pass name accordingly
and fix outdated pass descriptions as well.
This patch does not change any meaningful behavior, but not marked as
NFC because it changes a comment check line in a test case.
Reviewers: dschuff
Subscribers: mgorny, sbc100, jgravelle-google, sunfiish, llvm-commits
Differential Revision: https://reviews.llvm.org/D56093
llvm-svn: 350669
Starting in C++17, MSVC introduced a new mangling for function
parameters that are themselves noexcept functions. This patch
makes llvm-undname properly demangle them.
Patch by Zachary Henkel
Differential Revision: https://reviews.llvm.org/D55769
llvm-svn: 350656
A straightforward port of tsan to the new PM, following the same path
as D55647.
Differential Revision: https://reviews.llvm.org/D56433
llvm-svn: 350647
Summary:
This fixes the IDom for exit blocks and all blocks reachable from the exit blocks, when runtime unrolling under multiexit/exiting case.
We initially had a restrictive check that the IDom is only updated when
it is the header of the loop.
However, we also need to update the IDom to the correct one when the
IDom is any block within the original loop. See added test cases (which
fail dom tree verification without the patch).
Reviewers: reames, mzolotukhin, mkazantsev, hfinkel
Reviewed by: brzycki, kuhar
Subscribers: zzheng, dmgreen, llvm-commits
Differential Revision: https://reviews.llvm.org/D56284
llvm-svn: 350640
Commit f1db33c5c1a9 ("[BPF] Disable relocation for .BTF.ext section")
assigned relocation type R_BPF_NONE if the fixup type
is FK_Data_4 and the symbol is temporary.
The reason is we use FK_Data_4 as a fixup type
for insn offsets in .BTF.ext section.
Just checking whether the symbol is temporary is not enough.
For example, .debug_info may reference some strings whose
fixup is FK_Data_4 with a temporary symbol as well.
To truely reflect the case for .BTF.ext section,
this patch further checks that the section associateed with the symbol
must be SHF_ALLOC and SHF_EXECINSTR, i.e., in the text section.
This fixed the above-mentioned problem.
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 350637
This patch adds a convenience report() method for physical registers and
uses it to print the offending register with the 'MBB has allocatable
live-in' error.
Reviewers: MatzeB, rtereshin, dsanders
Reviewed By: dsanders
Differential Revision: https://reviews.llvm.org/D55946
llvm-svn: 350630
The PowerPC target itself is similar to the X86 target in https://reviews.llvm.org/rL348903
The llvm-exegesis unittests bits are similar to the corresponding AArch64 in https://reviews.llvm.org/rL350499
The whole patch is very similar to the WebAssembly target being added in https://reviews.llvm.org/rL350628
Also add a dep from tools/llvm-exegesis/lib to the AArch64 subdir, which I
failed to do in r350499.
The motivation for this target is solely that it has a unit test and I want to
enable the GN<->CMake unittest syncing check for llvm.
Differential Revision: https://reviews.llvm.org/D56416
llvm-svn: 350629
The WebAssembly target itself is similar to the X86 target in https://reviews.llvm.org/rL348903
The unittests bits are similar to the corresponding AArch64 in https://reviews.llvm.org/rL350499
The motivation for this target is solely that it has a unit test and I want to
enable the GN<->CMake unittest syncing check for llvm. (After this, only the
PowerPC target is needed and I can turn it on.)
Differential Revision: https://reviews.llvm.org/D56374
llvm-svn: 350628
Commit rL347861 introduced an unintentional change in the behaviour when
compiling for AArch64 at -O0 with -global-isel=0. Previously, explicitly
disabling GlobalISel resulted in using FastISel but an updated condition
in the commit changed it to using SelectionDAG. The patch fixes this
condition and slightly better organizes the code that chooses the
instruction selector.
Fixes PR40131.
Differential Revision: https://reviews.llvm.org/D56266
llvm-svn: 350626
The new-pm version of DA is untested. Testing requires a printer, so
add that and use it in the existing DA tests.
Differential Revision: https://reviews.llvm.org/D56386
llvm-svn: 350624
For stack frames on the size of a register in x86, a code size optimization
emits "push rax/eax" instead of "sub" for stack allocation. For example:
foo:
.cfi_startproc
BB#0:
pushq %rax
Ltmp0:
.cfi_def_cfa_offset 16
...
.cfi_endproc
However, we are falling back to DWARF in this case because we cannot
encode %rax as a saved register.
This requirement is wrong, since we don't care about the contents of
%rax, it is the equivalent of a sub.
In order to specify that we care about the contents of %rax, we would
need a .cfi_offset %rax, <offset>.
It's also overzealous in the case where there are pushes for callee saved
registers followed by a "push rax/eax" instead of "sub", in which case we should
also be able to encode the callee saved regs and everything else using compact
unwind.
Patch authored by Bruno Cardoso Lopes.
Differential Revision: https://reviews.llvm.org/D13793
llvm-svn: 350623
James Y Knight