Make sure that all the legalizer tests where the original instruction
needs to be removed check for the removal. We do this by adding
CHECK-NOT lines before and after the replacement sequence. This won't
catch pathological cases where the instruction remains somewhere in the
middle of the instruction sequence that's supposed to replace it, but
hopefully that won't occur in practice (since ideally we'd be setting
the insert point for the new instruction sequence either before or after
the original instruction and not fiddle with it while building the
sequence).
llvm-svn: 307647
We used to forget to erase the original instruction when replacing a
G_FCMP true/false. Fix this bug and make sure the tests check for it.
llvm-svn: 307639
We lower to a sequence consisting of:
- MOVi 0 into a register
- VCMPS to do the actual comparison and set the VFP flags
- FMSTAT to move the flags out of the VFP unit
- MOVCCi to either use the "zero register" that we have previously set
with the MOVi, or move 1 into the result register, based on the values
of the flags
As was the case with soft-float, for some predicates (one, ueq) we
actually need two comparisons instead of just one. When that happens, we
generate two VCMPS-FMSTAT-MOVCCi sequences and chain them by means of
using the result of the first MOVCCi as the "zero register" for the
second one. This is a bit overkill, since one comparison followed by
two non-flag-setting conditional moves should be enough. In any case,
the backend manages to CSE one of the comparisons away so it doesn't
matter much.
Note that unlike SelectionDAG and FastISel, we always use VCMPS, and not
VCMPES. This makes the code a lot simpler, and it also seems correct
since the LLVM Lang Ref defines simple true/false returns if the
operands are QNaN's. For SNaN's, even VCMPS throws an Invalid Operand
exception, so they won't be slipping through unnoticed.
Implementation-wise, this introduces a template so we can share the same
code that we use for handling integer comparisons, since the only
differences are in the details (exact opcodes to be used etc). Hopefully
this will be easy to extend to s64 G_FCMP.
llvm-svn: 307365
This covers both hard and soft float.
Hard float is easy, since it's just Legal.
Soft float is more involved, because there are several different ways to
handle it based on the predicate: one and ueq need not only one, but two
libcalls to get a result. Furthermore, we have large differences between
the values returned by the AEABI and GNU functions.
AEABI functions return a nice 1 or 0 representing true and respectively
false. GNU functions generally return a value that needs to be compared
against 0 (e.g. for ogt, the value returned by the libcall is > 0 for
true). We could introduce redundant comparisons for AEABI as well, but
they don't seem easy to remove afterwards, so we do different processing
based on whether or not the result really needs to be compared against
something (and just truncate if it doesn't).
llvm-svn: 307243
It looks like there are two target-independent but not GISel instructions that
need legalization, IMPLICIT_DEF and PHI. These are already anomalies since
their operands have important LLTs attached, so to make things more uniform it
seems like a good idea to add generic variants. Starting with G_IMPLICIT_DEF.
llvm-svn: 306875
* Mark as legal for (s32, i1, s32, s32)
* Map everything into GPRs
* Select to two instructions: a CMP of the condition against 0, to set
the flags, and a MOVCCr to select between the two inputs based on the
flags that we've just set
llvm-svn: 306382
G_SEQUENCE is going away soon so as a first step the MachineIRBuilder needs to
be taught how to emulate it with alternatives. We use G_MERGE_VALUES where
possible, and a sequence of G_INSERTs if not.
llvm-svn: 306119
Add support throughout the pipeline:
- mark as legal for s32 and pointers
- map to GPRs
- lower to a sequence of instructions, which moves 0 or 1 into the
result register based on the flags set by a CMPrr
We have copied from FastISel a helper function which maps CmpInst
predicates into ARMCC codes. Ideally, we should be able to move it
somewhere that both FastISel and GlobalISel can use.
llvm-svn: 305672
Add support for modulo for targets that have hardware division and for
those that don't. When hardware division is not available, we have to
choose the correct libcall to use. This is generally straightforward,
except for AEABI.
The AEABI variant is trickier than the other libcalls because it
returns { quotient, remainder }, instead of just one value like the
other libcalls that we've seen so far. Therefore, we need to use custom
lowering for it. However, we don't want to have too much special code,
so we refactor the target-independent code in the legalizer by adding a
helper for replacing an instruction with a libcall. This helper is used
by the legalizer itself when dealing with simple calls, and also by the
custom ARM legalization for the more complicated AEABI divmod calls.
llvm-svn: 305459
Lowering mixed struct args, params and returns used G_INSERT, which is a
bit more convoluted to support through the entire pipeline. Since they
don't occur that often in practice, it's probably wiser to leave them
out until later.
Meanwhile, we can lower homogeneous structs using G_MERGE_VALUES, which
has good support in the legalizer. These occur e.g. as the return of
__aeabi_idivmod, so it's nice to be able to support them.
llvm-svn: 305458
Add a couple of tests to increase coverage for the TableGen'erated code,
in particular for rules where 2 generic instructions may be combined
into a single machine instruction.
llvm-svn: 304971
According to the commit message from r296921, G_MERGE_VALUES and
G_INSERT are to be preferred over G_SEQUENCE. Therefore, stop generating
G_SEQUENCE in the ARM backend and remove the code dealing with it.
This boils down to the code breaking up double values for the soft float
calling convention. Use G_MERGE_VALUES + G_UNMERGE_VALUES instead of
G_SEQUENCE + G_EXTRACT for it. This maps very nicely to VMOVDRR +
VMOVRRD and simplifies the code in the instruction selector.
There's one occurence of G_SEQUENCE left in arm-irtranslator.ll, but
that is part of the target-independent code for translating constant
structs. Therefore, it is beyond the scope of this commit.
llvm-svn: 304902
This is identical to the support for the other binary operators:
- widen to s32
- map into GPR
- select ANDrr (via TableGen'erated code)
llvm-svn: 304885
If -simplify-mir option is passed then MIRPrinter will not print such fields.
This change also required some lit test cases in CodeGen directory to be changed.
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D32304
llvm-svn: 304779
When lowering calls, we generate instructions with machine opcodes
rather than generic ones. Therefore, we need to constrain the register
classes of the operands.
Also enable the machine verifier on the arm-irtranslator.ll test, since
that would've caught this issue.
Fixes (part of) PR32146.
llvm-svn: 304712
Very very similar to the support for arrays. As with arrays, we don't
support returning large structs that wouldn't fit in R0-R3. Most
front-ends would likely use sret arguments for that anyway.
The only significant difference is that when splitting a struct, we need
to make sure we set the correct original alignment on each member,
otherwise it may get split incorrectly between stack and registers.
llvm-svn: 304536
Clang coerces structs into arrays, so it's a good idea to support them.
Most of the support boils down to getting the splitToValueTypes helper
to actually split types. We then use G_INSERT/G_EXTRACT to deal with the
parts.
llvm-svn: 304132
This is the same as r292827 for AArch64: we widen 8- and 16-bit ADD, SUB
and MUL to 32 bits since we only have TableGen patterns for 32 bits.
See the commit message for r292827 for more details.
At this point we could just remove some of the tests for regbankselect
and instruction-select, since we're not going to see any narrow
operations at those levels anymore. Instead I decided to update them
with G_ANYEXT/G_TRUNC operations, so we can validate the full sequences
generated by the legalizer.
llvm-svn: 302782
G_ANYEXT can be introduced by the legalizer when widening scalars. Add
support for it in the register bank info (same mapping as everything
else) and in the instruction selector.
When selecting it, we treat it as a COPY, just like G_TRUNC. On this
occasion we get rid of some assertions in selectCopy so we can reuse it.
This shouldn't be a problem at the moment since we're not supporting any
complicated cases (e.g. FPR, different register banks). We might want to
separate the paths when we do.
llvm-svn: 302778
Using arguments with attribute inalloca creates problems for verification
of machine representation. This attribute instructs the backend that the
argument is prepared in stack prior to CALLSEQ_START..CALLSEQ_END
sequence (see http://llvm.org/docs/InAlloca.htm for details). Frame size
stored in CALLSEQ_START in this case does not count the size of this
argument. However CALLSEQ_END still keeps total frame size, as caller can
be responsible for cleanup of entire frame. So CALLSEQ_START and
CALLSEQ_END keep different frame size and the difference is treated by
MachineVerifier as stack error. Currently there is no way to distinguish
this case from actual errors.
This patch adds additional argument to CALLSEQ_START and its
target-specific counterparts to keep size of stack that is set up prior to
the call frame sequence. This argument allows MachineVerifier to calculate
actual frame size associated with frame setup instruction and correctly
process the case of inalloca arguments.
The changes made by the patch are:
- Frame setup instructions get the second mandatory argument. It
affects all targets that use frame pseudo instructions and touched many
files although the changes are uniform.
- Access to frame properties are implemented using special instructions
rather than calls getOperand(N).getImm(). For X86 and ARM such
replacement was made previously.
- Changes that reflect appearance of additional argument of frame setup
instruction. These involve proper instruction initialization and
methods that access instruction arguments.
- MachineVerifier retrieves frame size using method, which reports sum of
frame parts initialized inside frame instruction pair and outside it.
The patch implements approach proposed by Quentin Colombet in
https://bugs.llvm.org/show_bug.cgi?id=27481#c1.
It fixes 9 tests failed with machine verifier enabled and listed
in PR27481.
Differential Revision: https://reviews.llvm.org/D32394
llvm-svn: 302527
Fix a crash when trying to extend a value passed as a sign- or
zero-extended stack parameter. The cause of the crash was that we were
setting the size of the loaded value to 32 bits, and then tyring to
extend again to 32 bits.
This patch addresses the issue by also introducing a G_TRUNC after the
load. This will leave the unused bits to their original values set by
the caller, while being consistent about the types. For values that are
not extended, we just use a smaller load.
llvm-svn: 301531
We have to widen the operands to 32 bits and then we can either use
hardware division if it is available or lower to a libcall otherwise.
At the moment it is not enough to set the Legalizer action to
WidenScalar, since for libcalls it won't know what to do (it won't be
able to find what size to widen to, because it will find Libcall and not
Legal for 32 bits). To hack around this limitation, we request Custom
lowering, and as part of that we widen first and then we run another
legalizeInstrStep on the widened DIV.
llvm-svn: 301166
Add support for both targets with hardware division and without. For
hardware division we have to add support throughout the pipeline
(legalizer, reg bank select, instruction select). For targets without
hardware division, we only need to mark it as a libcall.
llvm-svn: 301164
When selecting a G_CONSTANT to a MOVi, we need the value to be an Imm
operand. We used to just leave the G_CONSTANT operand unchanged, which
works in some cases (such as the GEP offsets that we create when
referring to stack slots). However, in many other places the G_CONSTANTs
are created with CImm operands. This patch makes sure to handle those as
well, and to error out gracefully if in the end we don't end up with an
Imm operand.
Thanks to Oliver Stannard for reporting this issue.
llvm-svn: 301162
Select them as copies. We only select if both the source and the
destination are on the same register bank, so this shouldn't cause any
trouble.
llvm-svn: 300971
The condition in isSupportedType didn't handle struct/array arguments
properly. Fix the check and add a test to make sure we use the fallback
path in this kind of situation. The test deals with some common cases
where the call lowering should error out. There are still some issues
here that need to be addressed (tail calls come to mind), but they can
be addressed in other patches.
llvm-svn: 300967
Support G_MUL, very similar to G_ADD and G_SUB. The only difference is
in the instruction selector, where we have to select either MUL or MULv5
depending on the target.
llvm-svn: 300665
Use the same handling in the generic legalizer code as for the other
libcalls (G_FREM, G_FPOW).
Enable it on ARM for float and double so we can test it.
llvm-svn: 299931
It turns out -float-abi=hard doesn't set the hard float calling
convention for libcalls. We need to use a hard float triple instead
(e.g. gnueabihf).
llvm-svn: 299761
Legalize to a libcall.
On this occasion, also start allowing soft float subtargets. For the
moment G_FREM is the only legal floating point operation for them.
llvm-svn: 299753
This commit adds a parameter that lets us pass in the calling convention
of the call to CallLowering::lowerCall. This allows us to handle
situations where the calling convetion of the callee is different from
that of the caller.
Differential Revision: https://reviews.llvm.org/D31039
llvm-svn: 298254
Folding instructions when selecting can cause them to become dead.
Don't select these dead instructions (if they don't have other side
effects, and don't define physical registers).
Preserve existing tests by adding COPYs.
In some tests, the G_CONSTANT vregs never get constrained to a class:
the only use of the vreg was folded into another instruction, so the
G_CONSTANT, now dead, never gets selected.
llvm-svn: 298224
We used to hit an unreachable in getRegBankFromRegClass when dealing with the
stack pointer. This commit adds support for the GPRsp reg class.
llvm-svn: 297621
A bit more painful than G_INSERT because it was more widely used, but this
should simplify the handling of extract operations in most locations.
llvm-svn: 297100
Lower i1, i8 and i16 call parameters by extending them before storing them on
the stack. Also make sure we encode the correct, extended size in the
corresponding memory operand, and that we compute the correct stack size in the
end.
The latter is a bit more complicated because we used to compute the stack size
in the getStackAddress method, based on the Size and Offset of the parameters.
However, if the last parameter is sign extended, we'd be using the wrong,
non-extended size, and we'd end up with a smaller stack than we need to hold the
extended value. Instead of hacking this up based on the value of Size in
getStackAddress, we move our stack size handling logic to assignArg, where we
have access to the CCState which knows everything we could possibly want to know
about the stack. This way we don't need to duplicate any knowledge or resort to
any ugly hacks.
On this same occasion, update the IRTranslator test to check the sizes of the
stores everywhere, not just for sign extended paramteres.
llvm-svn: 296631
Lower i32, float and double parameters that need to live on the stack. This
boils down to creating some G_GEPs starting from the stack pointer and storing
the values there. During the process we also keep track of the stack size and
use the final value in the ADJCALLSTACKDOWN/UP instructions.
We currently assert for smaller types, since they usually require extensions.
They will be handled in a separate patch.
llvm-svn: 296473
Introduce a common ValueHandler for call returns and formal arguments, and
inherit two different versions for handling the differences (at the moment the
only difference is the way physical registers are marked as used).
llvm-svn: 295973
Add support for lowering calls with parameters than can fit into regs. Use the
same ValueHandler that we used for function returns, but rename it to match its
new, extended purpose.
llvm-svn: 295971
Start using the Subtarget to make decisions about what's legal. In particular,
we only mark floating point operations as legal if we have VFP2, which is
something we should've done from the very start.
llvm-svn: 295439
Since they're only used for passing around double precision floating point
values into the general purpose registers, we'll lower them to VMOVDRR and
VMOVRRD.
llvm-svn: 295310
For now we just mark them as legal all the time and let the other passes bail
out if they can't handle it. In the future, we'll want to move more of the
brains into the legalizer.
llvm-svn: 295300
For the hard float calling convention, we just use the D registers.
For the soft-fp calling convention, we use the R registers and move values
to/from the D registers by means of G_SEQUENCE/G_EXTRACT. While doing so, we
make sure to honor the endianness of the target, since the CCAssignFn doesn't do
that for us.
For pure soft float targets, we still bail out because we don't support the
libcalls yet.
llvm-svn: 295295
I forgot to remove the neonfp target feature from the test, which means we'd
have trouble selecting VADDS on targets that have neonfp enabled by default.
llvm-svn: 294451
Add a register bank for floating point values and select simple instructions
using them (add, copies from GPR).
This assumes that the hardware can cope with a single precision add (VADDS)
instruction, so the legalizer will treat G_FADD as legal and the instruction
selector will refuse to select if the hardware doesn't support it. In the future
we'll want to be more careful about this, and legalize to libcalls if we have to
use soft float.
llvm-svn: 294442
It is important to change the ArgInfo's type from pointer to integer, otherwise
the CC assign function won't know what to do. Instead of hacking it up, we use
ComputeValueVTs and introduce some of the helpers that we will need later on for
lowering more complex types.
llvm-svn: 293889
Add support for loading i1, i8 and i16 arguments from the stack, with or without
the ABI extension flags.
When the ABI extension flags are present, we load a 4-byte value, otherwise we
preserve the size of the load and let the instruction selector replace it with a
LDRB/LDRH. This generates the same thing as DAGISel.
Differential Revision: https://reviews.llvm.org/D27803
llvm-svn: 293163
Add support for:
* i1 add
* i1 function arguments, if passed through registers
* i1 returns, with ABI signext/zeroext
Differential Revision: https://reviews.llvm.org/D27706
llvm-svn: 293035
At the moment, this means supporting the signext/zeroext attribute on the return
type of the function. For function arguments, signext/zeroext should be handled
by the caller, so there's nothing for us to do until we start lowering calls.
Note that this does not include support for other extensions (i8 to i16), those
will be added later.
Differential Revision: https://reviews.llvm.org/D27705
llvm-svn: 293034
This allows lowering i8 and i16 arguments if they can fit in the registers. Note
that the lowering is incomplete - ABI extensions are handled in a subsequent
patch.
(Last part of)
Differential Revision: https://reviews.llvm.org/D27704
llvm-svn: 290106
Teach the instruction selector and legalizer that it's ok to have adds with 8 or
16-bit integers.
This is the second part of https://reviews.llvm.org/D27704
llvm-svn: 290105
Teach the instruction selector that it's ok to copy small values from physical
registers.
First part of https://reviews.llvm.org/D27704
llvm-svn: 290104
This adds support for lowering more than 4 arguments (although still i32 only).
It uses the handleAssignments / ValueHandler infrastructure extracted from
the AArch64 backend in r288658.
Differential Revision: https://reviews.llvm.org/D27195
llvm-svn: 290098
Add support for selecting simple G_LOAD and G_FRAME_INDEX instructions (32-bit
scalars only). This will be useful for functions that need to pass arguments on
the stack.
First part of https://reviews.llvm.org/D27195.
llvm-svn: 290096
Add the minimal support necessary to select a function that returns the sum of
two i32 values.
This includes some support for argument/return lowering of i32 values through
registers, as well as the handling of copy and add instructions throughout the
GlobalISel pipeline.
Differential Revision: https://reviews.llvm.org/D26677
llvm-svn: 289940
Diana Picus