Summary:
This doesn't exist in other LLVM projects any longer and doesn't
do anything.
Reviewers: chaoren, labath
Subscribers: emaste, tberghammer, lldb-commits, danalbert
Differential Revision: http://reviews.llvm.org/D12586
llvm-svn: 246749
This is still something I need to fix, but at least it's not so ugly, and it's
consistent with the other code that does that so we will catch it when we purge
all such code.
llvm-svn: 246738
Clang-specific part, create the ExpressionVariable source/header file and
move ClangExpressionVariable into the Clang expression parser plugin.
It is expected that there are some ugly #include paths... these will be resolved
by either (1) making that code use generic expression variables (once they're
separated appropriately) or (2) moving that code into a plug-in, often
the expression parser plug-in.
llvm-svn: 246737
Summary:
When calling find_first_of and find_last_of on a single character,
we can instead just call find / rfind and make our intent more
clear.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D12518
llvm-svn: 246609
The Language plugin is menat to answer language-specific questions that are not bound to the existence of a process. Those are still the domain of the LanguageRuntime plugin
The Language plugin will, instead, answer questions such as providing language-specific data formatters or expression evaluation
At the moment, the interface is hollowed out, and empty do-nothing plugins have been setup for ObjC, C++ and ObjC++
llvm-svn: 246212
SUMMARY:
This patch implements Target::GetBreakableLoadAddress() method that takes an address
and checks for any reason there is a better address than this to put a breakpoint on.
If there is then return that address.
MIPS uses this method to avoid breakpoint in delay slot.
Reviewers: clayborg, jingham
Subscribers: jingham, mohit.bhakkad, sagar, jaydeep, nitesh.jain, lldb-commits
Differential Revision: http://http://reviews.llvm.org/D12184
llvm-svn: 246015
Create a new "lldb_private::CompilerDeclContext" class that will replace all direct uses of "clang::DeclContext" when used in compiler agnostic code, yet still allow for conversion to clang::DeclContext subclasses by clang specific code. This completes the abstraction of type parsing by removing all "clang::" references from the SymbolFileDWARF. The new "lldb_private::CompilerDeclContext" class abstracts decl contexts found in compiler type systems so they can be used in internal API calls. The TypeSystem is required to support CompilerDeclContexts with new pure virtual functions that start with "DeclContext" in the member function names. Converted all code that used lldb_private::ClangNamespaceDecl over to use the new CompilerDeclContext class and removed the ClangNamespaceDecl.cpp and ClangNamespaceDecl.h files.
Removed direct use of clang APIs from SBType and now use the abstract type systems to correctly explore types.
Bulk renames for things that used to return a ClangASTType which is now CompilerType:
"Type::GetClangFullType()" to "Type::GetFullCompilerType()"
"Type::GetClangLayoutType()" to "Type::GetLayoutCompilerType()"
"Type::GetClangForwardType()" to "Type::GetForwardCompilerType()"
"Value::GetClangType()" to "Value::GetCompilerType()"
"Value::SetClangType (const CompilerType &)" to "Value::SetCompilerType (const CompilerType &)"
"ValueObject::GetClangType ()" to "ValueObject::GetCompilerType()"
many more renames that are similar.
llvm-svn: 245905
The POSIX linker generally reports the load bias for the loaded
libraries but in some case it is useful to handle a library based on
absolute load address. Example usecases:
* Windows linker uses absolute addresses
* Library list came from different source (e.g. /proc/<pid>/maps)
Differential revision: http://reviews.llvm.org/D12233
llvm-svn: 245834
This was breaking disassembly for arm machines that we force to be
thumb mode all the time because we were only checking for llvm::Triple::arm.
i.e.
armv6m (ARM Cortex-M0)
armv7m (ARM Cortex-M3)
armv7em (ARM Cortex-M4)
<rdar://problem/22334522>
llvm-svn: 245645
Eliminated ENABLE_128_BIT_SUPPORT and union ValueData from Scalar.cpp and use llvm::APInt and llvm::APFloat for all integer and floating point types. Also used Scalar in RegisterValue.cpp
Reviewers: tberghammer, ovyalov, clayborg, labath
Subscribers: lldb-commits, nitesh.jain, jaydeep
Differential: http://reviews.llvm.org/D12100
llvm-svn: 245547
Whether or not frames print their tid in hex or decimal is apparently
hardcoded to depend on the operating system. For now a comment was
added that this should be changed to a more sane check (for example
a setting), and the OS check is updated to do the right thing for
Windows.
llvm-svn: 245371
Summary:
in case we are logging to stdout, any log lines from the forked child can be misconstrued to be
inferior output. To avoid this, we disable all logging immediately after forking.
I also fix the implementatoion of DisableAllLogChannels, which was a no-op before this commit.
Reviewers: clayborg, ovyalov
Subscribers: dean, lldb-commits
Differential Revision: http://reviews.llvm.org/D12083
llvm-svn: 245272
Eliminated ENABLE_128_BIT_SUPPORT and union ValueData from Scalar.cpp and use llvm::APInt and llvm::APFloat for all integer and floating point types. Also used Scalar in RegisterValue.cpp
Reviewers: jaydeep, clayborg, jasonmolenda, ovyalov, emaste
Subscribers: tberghammer, ovyalov, emaste, mohit.bhakkad, nitesh.jain, bhushan
Differential: http://reviews.llvm.org/D10919
llvm-svn: 245216
for eh_frame and stabs register numberings. This is not
complete but it's a step in the right direction. It's almost
entirely mechanical.
lldb informally uses "gcc register numbering" to mean eh_frame.
Why? Probably because there's a notorious bug with gcc on i386
darwin where the register numbers in eh_frame were incorrect.
In all other cases, eh_frame register numbering is identical to
dwarf.
lldb informally uses "gdb register numbering" to mean stabs.
There are no official definitions of stabs register numbers
for different architectures, so the implementations of gdb
and gcc are the de facto reference source.
There were some incorrect uses of these register number types
in lldb already. I fixed the ones that I saw as I made
this change.
This commit changes all references to "gcc" and "gdb" register
numbers in lldb to "eh_frame" and "stabs" to make it clear
what is actually being represented.
lldb cannot parse the stabs debug format, and given that no
one is using stabs any more, it is unlikely that it ever will.
A more comprehensive cleanup would remove the stabs register
numbers altogether - it's unnecessary cruft / complication to
all of our register structures.
In ProcessGDBRemote, when we get register definitions from
the gdb-remote stub, we expect to see "gcc:" (qRegisterInfo)
or "gcc_regnum" (qXfer:features:read: packet to get xml payload).
This patch changes ProcessGDBRemote to also accept "ehframe:"
and "ehframe_regnum" from these remotes.
I did not change GDBRemoteCommunicationServerLLGS or debugserver
to send these new packets. I don't know what kind of interoperability
constraints we might be working under. At some point in the future
we should transition to using the more descriptive names.
Throughout lldb we're still using enum names like "gcc_r0" and "gdb_r0",
for eh_frame and stabs register numberings. These should be cleaned
up eventually too.
The sources link cleanly on macosx native with xcode build. I
don't think we'll see problems on other platforms but please let
me know if I broke anyone.
llvm-svn: 245141
Another step towards isolating all language/AST specific code into the files to further abstract specific implementations of parsing types for a given language.
llvm-svn: 245090
This is more preparation for multiple different kinds of types from different compilers (clang, Pascal, Go, RenderScript, Swift, etc).
llvm-svn: 244689
This is the work done by Ryan Brown from http://reviews.llvm.org/D8712 that makes a TypeSystem class and abstracts types to be able to use a type system.
All tests pass on MacOSX and passed on linux the last time this was submitted.
llvm-svn: 244679
This change :
- Fixes offsets of all register sets for Mips.
- Adds MSA register set and FRE=1 mode support for FP register set.
- Separates lldb register numbers and register infos of freebsd/mips64 from linux/mips64.
- Re-orders the register numbers of all kinds for mips to be consistent with freebsd order of register numbers.
- Eliminates ENABLE_128_BIT_SUPPORT and union ValueData from Scalar.cpp and uses llvm::APInt and llvm::APFloat for all integer and floating point types.
Reviewers : emaste, jaydeep, clayborg
Subscribers : emaste, mohit.bhakkad, nitesh.jain, bhushan
Differential : http://reviews.llvm.org/D10919
llvm-svn: 244308
Previously embedded interpreters were handled as ad-hoc source
files compiled into source/Interpreter. This made it hard to
disable a specific interpreter, or to add support for other
interpreters and allow the developer to choose which interpreter(s)
were enabled for a particular build.
This patch converts script interpreters over to a plugin-based system.
Script interpreters now live in source/Plugins/ScriptInterpreter, and
the canonical LLDB interpreter, ScriptInterpreterPython, is moved there
as well.
Any new code interfacing with the Python C API must live in this location
from here on out. Additionally, generic code should never need to
reference or make assumptions about the presence of a specific interpreter
going forward.
Differential Revision: http://reviews.llvm.org/D11431
Reviewed By: Greg Clayton
llvm-svn: 243681
The following functions were the only functions that updates the source file:
SourceManager::File::DisplaySourceLines()
SourceManager::File::FindLinesMatchingRegex()
But there we API calls that were using the SourceManager::File and asking it questions, like "is line 12 valid" and that might respond incorrectly if the source file had been updated.
<rdar://problem/21269402>
llvm-svn: 243551
debugging optimized code. Adds new methods on Function/SBFunction
to query whether a given function is optimized. Adds a new
function.is-optimized format entity and changes the default
frame-format to append "[opt]" if the function was built with
optimization.
The only indication that a binary was built with optimization
that we have right now is the presence of the DW_AT_APPLE_optimized
attribute (DW_FORM_flag value 1) in the DW_TAG_compile_unit.
The absence of this flag may mean that the compile_unit was not
compiled with optimization, or it may mean that the producer
does not generate this attribute.
Currently this only works for dSYM debugging. When we create
the CompileUnit with dwarf-in-.o-file debugging we don't have
the attribute value yet so it's not set. I need to find the
flag value when we do start to read the .o file DWARF and
set the CompileUnit's status at that point - but haven't
done it yet.
I'm also going to add a mechanism for issuing warnings to users
such that they're only issued once in a debug session and
there is away for users to suppress these warnings altogether
via .lldbinit file settings. But I want to get this changeset
committed now that it's at a useful state.
<rdar://problem/19281172>
llvm-svn: 243508
This commit introduced an infinite recursion in
ValueObjectChild::CanUpdateWithInvalidExecutionContext (because FollowParentChain also considers
the current object), which broke nearly all the tests. Ignoring the current object removes the
recursion, but two tests still time out (TestDataFormatterLibcxxList.py and
TestValueObjectRecursion.py) for some reason. Reverting for now.
llvm-svn: 243102
If the function is a template then the return type is part of the
function name. This CL fixes the parsing of these function names in
the case when the return type contains ':'.
The name of free functions in C++ don't have context part. Fix the
logic geting the function name without arguments out from a full
function name to handle this case.
Change the handling of step-in-avoid-regexp to match the value against
the function name without it's arguments and return value. This is
required because the default regex ("^std::") would match any template
function returning an std object.
Fifferential revision: http://reviews.llvm.org/D11461
llvm-svn: 243099
The issue is that a child can't really ask the root object, since this decision could actually hinge on whether a dynamic and/or synthetic value is present
To do this, make values vote lazily for whether they are willing to allow this, so that we can navigate up the chain without recursively invoking ourselves
Tentative fix for rdar://21949558
llvm-svn: 243077
Summary:
This enables us to avoid casts to "void *" in some cases and avoids a couple of "casts off const
qualifiers" warnings.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11388
llvm-svn: 242874
Target and breakpoints options were added:
breakpoint set --language lang --name func
settings set target.language pascal
These specify the Language to use when interpreting the breakpoint's
expression (note: currently only implemented for breakpoints on
identifiers). If the breakpoint language is not set, the target.language
setting is used.
This support is required by Pascal, for example, to set breakpoint at 'ns.foo'
for function 'foo' in namespace 'ns'.
Tests on the language were also added to Module::PrepareForFunctionNameLookup
for efficiency.
Reviewed by: clayborg
Subscribers: jingham, lldb-commits
Differential Revision: http://reviews.llvm.org/D11119
llvm-svn: 242844
SUMMARY:
The patch detects MIPS application specific extensions (ASE) like micromips by reading
ELF header.e_flags and SHT_MIPS_ABIFLAGS section. MIPS triple does not contain ASE
information like micromips, mips16, DSP, MSA etc. These can be read from header.e_flags
or SHT_MIPS_ABIFLAGS section.
Reviewers: clayborg
Subscribers: mohit.bhakkad, sagar, lldb-commits
Differential Revision: http://reviews.llvm.org/D11133
llvm-svn: 242381
Summary:
Other changes around the main change include:
1. Add a method Cast to ValueObjectConstResult, ValueObjectConstResultImpl
and ValueObjectConstResultChild.
2. Add an argument |live_address| of type lldb::addr_t to the constructor
of ValueObjectConstResultChild. This is passed on to the backing
ValueObjectConstResultImpl object constructor so that the address of the
child value can be calculated properly.
Reviewers: granata.enrico, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11203
llvm-svn: 242374
The size of a long double was hardcoded in DataExtractor for x86 and
x86_64 architectures. This CL removes the hard coded values and use the
actual size based on the floating point semantics specified.
Differential revision: http://reviews.llvm.org/D8417
llvm-svn: 242019
This patch:
- Allows mips32 cores to match with any mips32/mips64 cores.
- Allows mips32r2 cores to match with core only up-to mips32r2/mips64r2.
- Allows mips32r3 cores to match with core only up-to mips32r3/mips64r3.
- Allows mips32r5 cores to match with core only up-to mips32r3/mips64r5.
- Allows mips32r6 core to match with only mips32r6/mips64r6 or mips32/mips64.
Reviewers: emaste, jaydeep, clayborg
Subscribers: mohit.bhakkad, nitesh.jain, bhushan, lldb-commits
Differential Revision: http://reviews.llvm.org/D10921
llvm-svn: 242016
Change over existing code to use this new parser so StructuredData can use the tokenizer to parse JSON instead of doing it manually.
This allowed us to easily parse JSON into JSON* objects as well as into StructuredData.
llvm-svn: 241522
This API is currently a no-op (in the sense that it has the same behavior as the already existing GetName()), but is meant long-term to provide a best-for-visualization version of the name of a function
It is still not hooked up to the command line 'bt' command, nor to the 'gui' mode, but I do have ideas on how to make that work going forward
rdar://21203242
llvm-svn: 241482
* Add in-memory object file handling to the core dynamic loader
* Fix in memory object file handling in ObjectFileELF (previously
only part of the file was loaded before parsing)
* Fix load address setting in ObjectFileELF for 32-bit targets
when the load bias is negative
* Change hack in DYLDRendezvous.cpp to be more specific and not to
interfere with object files with fixed load address
Differential revision: http://reviews.llvm.org/D10800
llvm-svn: 241057
A few extras were fixed
- Symbol::GetAddress() now returns an Address object, not a reference. There were places where people were accessing the address of a symbol when the symbol's value wasn't an address symbol. On MacOSX, undefined symbols have a value zero and some places where using the symbol's address and getting an absolute address of zero (since an Address object with no section and an m_offset whose value isn't LLDB_INVALID_ADDRESS is considered an absolute address). So fixing this required some changes to make sure people were getting what they expected.
- Since some places want to access the address as a reference, I added a few new functions to symbol:
Address &Symbol::GetAddressRef();
const Address &Symbol::GetAddressRef() const;
Linux test suite passes just fine now.
<rdar://problem/21494354>
llvm-svn: 240702
The language can not be definitively determined from the mangling, so
this new name helps clarify that fact. This addresses the concerns raised
in http://reviews.llvm.org/rL226962.
Reviewed by: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10723
llvm-svn: 240662
Enable ${language} to be specified in the frame-format string to see
the current frame's compile unit language in "frame info".
Test Plan:
debug a C++ program, run to main, and run the lldb commands:
settings set frame-format "frame lang=${language}\n"
frame info
you should see:
frame lang=c++
test case added in:
./dotest.py --executable lldb -f SettingsCommandTestCase.test_set_frame_format
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D10561
llvm-svn: 240440
We have been working on reducing the packet count that is sent between LLDB and the debugserver on MacOSX and iOS. Our approach to this was to reduce the packets required when debugging multiple threads. We currently make one qThreadStopInfoXXXX call (where XXXX is the thread ID in hex) per thread except the thread that stopped with a stop reply packet. In order to implement multiple thread infos in a single reply, we need to use structured data, which means JSON. The new jThreadsInfo packet will attempt to retrieve all thread infos in a single packet. The data is very similar to the stop reply packets, but packaged in JSON and uses JSON arrays where applicable. The JSON output looks like:
[
{ "tid":1580681,
"metype":6,
"medata":[2,0],
"reason":"exception",
"qaddr":140735118423168,
"registers": {
"0":"8000000000000000",
"1":"0000000000000000",
"2":"20fabf5fff7f0000",
"3":"e8f8bf5fff7f0000",
"4":"0100000000000000",
"5":"d8f8bf5fff7f0000",
"6":"b0f8bf5fff7f0000",
"7":"20f4bf5fff7f0000",
"8":"8000000000000000",
"9":"61a8db78a61500db",
"10":"3200000000000000",
"11":"4602000000000000",
"12":"0000000000000000",
"13":"0000000000000000",
"14":"0000000000000000",
"15":"0000000000000000",
"16":"960b000001000000",
"17":"0202000000000000",
"18":"2b00000000000000",
"19":"0000000000000000",
"20":"0000000000000000"},
"memory":[
{"address":140734799804592,"bytes":"c8f8bf5fff7f0000c9a59e8cff7f0000"},
{"address":140734799804616,"bytes":"00000000000000000100000000000000"}
]
}
]
It contains an array of dicitionaries with all of the key value pairs that are normally in the stop reply packet. Including the expedited registers. Notice that is also contains expedited memory in the "memory" key. Any values in this memory will get included in a new L1 cache in lldb_private::Process where if a memory read request is made and that memory request fits into one of the L1 memory cache blocks, it will use that memory data. If a memory request fails in the L1 cache, it will fall back to the L2 cache which is the same block sized caching we were using before these changes. This allows a process to expedite memory that you are likely to use and it reduces packet count. On MacOSX with debugserver, we expedite the frame pointer backchain for a thread (up to 256 entries) by reading 2 pointers worth of bytes at the frame pointer (for the previous FP and PC), and follow the backchain. Most backtraces on MacOSX and iOS now don't require us to read any memory!
We will try these packets out and if successful, we should port these to lldb-server in the near future.
<rdar://problem/21494354>
llvm-svn: 240354
Summary:
* Fix enum LanguageType values so that they can be used as indexes
into array language_names and g_languages as assumed by
LanguageRuntime::GetNameForLanguageType,
Language::SetLanguageFromCString and Language::AsCString.
* Add DWARFCompileUnit::LanguageTypeFromDWARF to convert from DWARF
DW_LANG_* values to enum LanguageType values.
Reviewed By: clayborg, abidh
Differential Revision: http://reviews.llvm.org/D10484
llvm-svn: 239963
Setting the OSType in the ArchSpec triple is needed to correctly setup
up the register context plugin. ArchSpec::SetArchitecture, for Mach-O
only, sets the OSType. For ELF it was left to the ObjectFileELF to fill
in the missing OSType.
This change moves the ObjectFileELF logic into ArchSpec.
A new optional 'os' parameter has been added to SetArchitecture.
For ELF, this value is the from the ELF header.e_ident[EI_OSABI].
The default value is 0 or ELFOSABI_NONE.
The real work of determining the OSType was done by the ObjectFileELF
helper function GetOsFromOSABI. This logic has been moved
SetArchitecture.
GetOsFromOSABI has been commented as being deprectated. It is left in
to support asserts.
For ELF the vendor value returned from SetArchitecture should be
UnknownVendor. An unneeded resetting in ObjectFileELF has been removed
and replaced with an assert.
This fixes a problem reading a core file on FreeBSD/ARM because the spec
triple was arm-unknown-unknown.
Patch by Tom Rix.
Differential Revision: http://reviews.llvm.org/D9292
llvm-svn: 239148
This was of course overridable by using DumpValueObjectOptions, but the default should be saner and the previous behavior made for a few fun investigations....
rdar://problem/21065149
llvm-svn: 238961
Since interaction with the python interpreter is moving towards
being more isolated, we won't be able to include this header from
normal files anymore, all includes of it should be localized to
the python library which will live under source/bindings/API/Python
after a future patch.
None of the files that were including this header actually depended
on it anyway, so it was just a dead include in every single instance.
llvm-svn: 238581
Summary:
LLDB on Windows should now be able to demangle Linux/Android symbols.
Also updated CxaDemangle.cpp to be compatible with MSVC.
Depends on D9949, D9954, D10048.
Reviewers: zturner, emaste, clayborg
Reviewed By: clayborg
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D10040
llvm-svn: 238460
Summary: In preparation for some changes to make this compatible with MSVC.
Reviewers: emaste, zturner, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9949
llvm-svn: 238459
This change also get rid of an unused Debugger instance in
GDBRemoteCommunicationServerLLGS and the command interpreter from
lldb-platform what was used only for enabling logging.
Differential revision: http://reviews.llvm.org/D9876
llvm-svn: 238319
Summary:
There is an issue in lldb where the command prompt can appear at the wrong time. The partial fix
we have in for this is not working all the time and is introducing unnecessary delays. This
change does:
- Change Process:SyncIOHandler to use integer start id's for synchronization to avoid it being
confused by quick start-stop cycles. I picked this up from a suggested patch by Greg to
lldb-dev.
- coordinates printing of asynchronous text with the iohandlers. This is also based on a
(different) Greg's patch, but I have added stronger synchronization to it to avoid races.
Together, these changes solve the prompt problem for me on linux (both with and without libedit).
I think they should behave similarly on Mac and FreeBSD and I think they will not make matters
worse for windows.
Test Plan: Prompt comes out alright. All tests still pass on linux.
Reviewers: clayborg, emaste, zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9823
llvm-svn: 238313
It turns out, child values also need similar provisions
This patch simplifies things a bit allowing ValueObject subclasses to just declare whether they can accept an invalid context at update time, and letting the update machinery in the EvaluationPoint to the rest
Also, this lets ValueObjectChild proclaim that its parent chooses whether such blank-slate updates are possible
llvm-svn: 237714
This patch initially was committed in r237460 but later it was reverted (r237479) due to 4 new failures:
* TestExitDuringStep.py
* TestNumThreads.py
* TestThreadExit.py
* TestThreadStates.py
This patch also fixes these tests.
llvm-svn: 237566
And they also do not have a thread/frame attached to them
That makes dynamic and synthetic values attached to them impossible to update - which, among other things, makes it impossible to properly display persistent variables of types that could have such dynamic/persistent values
Fix this by making it so that a ValueObject can control its constantness (hint: dynamic and synthetic values cannot be constant) and whether it wants to let itself be updated when an invalid thread is around
llvm-svn: 237504
Summary:
This option forces to only set a source line breakpoint when there is an exact-match
This patch includes the following commits:
# Add the -m/--exact-match option in "breakpoint set" command
## Add exact_match arg in BreakpointResolverFileLine ctor
## Add m_exact_match field in BreakpointResolverFileLine
## Add exact_match arg in BreakpointResolverFileRegex ctor
## Add m_exact_match field in BreakpointResolverFileRegex
## Add exact_match arg in Target::CreateSourceRegexBreakpoint
## Add exact_match arg in Target::CreateBreakpoint
## Add -m/--exact-match option in "breakpoint set" command
# Add target.exact-match option to skip BP if source line doesn't match
## Add target.exact-match global option
## Add Target::GetExactMatch
## Refactor Target::CreateSourceRegexBreakpoint to accept LazyBool exact_match (was bool)
## Refactor Target::CreateBreakpoint to accept LazyBool exact_match (was bool)
# Add target.exact-match test in SettingsCommandTestCase
# Add BreakpointOptionsTestCase tests to test --skip-prologue/--exact-match options
# Fix a few typos in lldbutil.check_breakpoint_result func
# Rename --exact-match/m_exact_match/exact_match/GetExactMatch to --move-to-nearest-code/m_move_to_nearest_code/move_to_nearest_code/GetMoveToNearestCode
# Add exact_match field in BreakpointResolverFileLine::GetDescription and BreakpointResolverFileRegex::GetDescription, for example:
was:
```
1: file = '/Users/IliaK/p/llvm/tools/lldb/test/functionalities/breakpoint/breakpoint_command/main.c', line = 12, locations = 1, resolved = 1, hit count = 2
1.1: where = a.out`main + 20 at main.c:12, address = 0x0000000100000eb4, resolved, hit count = 2
```
now:
```
1: file = '/Users/IliaK/p/llvm/tools/lldb/test/functionalities/breakpoint/breakpoint_command/main.c', line = 12, exact_match = 0, locations = 1, resolved = 1, hit count = 2
1.1: where = a.out`main + 20 at main.c:12, address = 0x0000000100000eb4, resolved, hit count = 2
```
Test Plan:
./dotest.py -v --executable $BUILDDIR/bin/lldb functionalities/breakpoint/
./dotest.py -v --executable $BUILDDIR/bin/lldb settings/
./dotest.py -v --executable $BUILDDIR/bin/lldb tools/lldb-mi/breakpoint/
Reviewers: jingham, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits, clayborg, jingham
Differential Revision: http://reviews.llvm.org/D9273
llvm-svn: 237460
Removed some unused variables, added some consts, changed some casts
to const_cast. I don't think any of these changes are very
controversial.
Differential Revision: http://reviews.llvm.org/D9674
llvm-svn: 237218
Summary:
Hexagon is a VLIW processor. It can execute multiple instructions at once, called a packet. Breakpoints need to be alone in a packet. This patch will make sure that temporary breakpoints used for stepping are set at the start of a packet, which will put the breakpoint in a packet by itself.
Patch by Deepak Panickal of CodePlay and Ted Woodward of Qualcomm.
Reviewers: deepak2427, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9437
llvm-svn: 237047
Thread-safe logging had been disabled because of a deadlock,
possibly due to a lock acquired during a signal handler.
This patch turns thread safe logging back on and also greatly
reduces the scope of the lock, confining it only to the code that
affects the underlying output stream, instead of all the code that
builds up the formatted log message. this should resolve the
issue surrounding the deadlock.
llvm-svn: 236892
Summary:
After r236447, ValueObject::GetAddressOf returns LLDB_INVALID_ADDRESS
when the value type is eValueHostAddress. For such a case, clients of
GetAddressOf should get the address from the scalar part of the value
instead of using the value returned by GetAddressOf directly.
This change also makes ValueObject::GetAddressOf set the address type to
eAddressTypeHost for values of eValueHostAddress so that clients can
recognize that they need to fetch the address from the scalar part
of the value.
Test Plan: ninja check-lldb on linux
Reviewers: clayborg, ovyalov
Reviewed By: ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9490
llvm-svn: 236473
Summary:
This fixes TestRegisterVariables for clang and hence it is enabled in this commit.
Test Plan: dotest.py -C clang -p TestRegisterVariables
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9421
llvm-svn: 236447
an argument pointing into the middle of m_buffer and then
Write() calls GrowBuffer() to resize m_buffer, leaving
the content argument pointing into deallocated memory.
Patch by Kate Stone.
<rdar://problem/20756722>
llvm-svn: 236286
Based on list discussions, a different approach is desired for
reducing the visual impact of logging statements on the
readability of the code. Another mechanism will be added in
a followup patch, but for now, since NullLog is unreferenced,
this patch just removes it.
This patch does *not* remove the other half of r236174, which was
to delete some dead code surrounding logging flags.
llvm-svn: 236259
The purpose of this class is so that GetLogIfAllCategoriesSet
can always return an instance of some class, whether it be a real
logging class or a "null" class, which ignores messages. Code
that is littered with if statements that only log if the pointer
is non-null can get very unwieldy very quickly, so this should
help code readability in such circumstances.
Since I'm in this code anyway, I'm also deleting the
PrintfWithFlags methods, as well as all the flags, since they
appear to be dead code that have been superceded by newer
mechanisms and all the flags are simply ignored.
llvm-svn: 236174
Patch by Jaydeep Patil
Added MIPS32 and MIPS64 core revisions. This would be followed by register context and emulate-instruction for MIPS32.
DYLDRendezvous.cpp:
On Linux link map struct does not contain extra load offset field.
Reviewers: clayborg
Subscribers: bhushan, mohit.bhakkad, sagar, lldb-commits.
Differential Revision: http://reviews.llvm.org/D9190
llvm-svn: 235574
Previously the read thread was only stopped if CloseOnEOF was set on the
communication channel. It caused it to spin in case of an EOF because
::select() always reported that we can read from the file descriptor.
This CL change this behavior with stopping the read thread on EOF but do
a disconnect only if CloseOnEOF is enabled.
Differential revision: http://reviews.llvm.org/D9077
llvm-svn: 235291
the changes in r233255/r233258. Normally if lldb attaches to
a running process, when we call Process::Destroy, we want to detach
from the process. If lldb launched the process itself, ::Destroy
should kill it.
However, if we attach to a process and the driver calls SBProcess::Kill()
(which calls Destroy), we need to kill it even if we didn't launch it
originally.
The force_kill param allows for the SBProcess::Kill method to force the
behavior of Destroy.
<rdar://problem/20424439>
llvm-svn: 235158
Also fixed an issue with the GUI mode where tree items wouldn't be notified that they were selected. Now selecting a thread or stack frame in the Threads view will update all windows (source, variables, registers).
llvm-svn: 234640
Summary:
Previously the Debugger::HandleProcessEvent hid a top IOHandler if the
process's IOHandler was inactive and later refreshed it. Usually the
IOHandler.Refresh() prints the (lldb) prompt. The problem was in case of
iOS remote platform when trying to execute 'command source' command.
On this platform the process's IOHandler is empty, therefore the
Debugger::HandleProcessEvent hid a top IOHandler and later refreshed it.
So that the (lldb) prompt was printed with a program output in mixed
order:
was:
```
longlonglonglonglonglonglonglonglonglonglonglonglonglonglonglonglonglong
longlonglonglonglonglonglonglonglonglonglonglonglonglonglon(lldb)
glonglonglonglonglonglonglonglonglonglonglonglong string
```
now:
```
longlonglonglonglonglonglonglonglonglonglonglonglonglonglonglonglonglong
longlonglonglonglonglonglonglonglonglonglonglonglonglonglonglonglonglong
longlonglonglonglonglonglonglonglong string
```
Reviewers: zturner, jingham, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits, jingham, zturner, clayborg
Differential Revision: http://reviews.llvm.org/D8929
llvm-svn: 234517
In an effort to reduce binary size for components not wishing to
link against all of LLDB, as well as a parallel effort to reduce
link dependencies on Python, this patch splits out the notion of
LLDB initialization into "full" and "common" initialization.
All code related to initializing the full LLDB suite lives directly
in API now. Previously it was only referenced from API, but because
it was defined in lldbCore, it would get implicitly linked against
by everything including lldb-server, causing a considerable
increase in binary size.
By moving this to the API layer, it also creates a better layering
for the ongoing effort to make the embedded interpreter replacable
with one from a different language (or even be completely removeable).
One semantic change necessary to get this all working was to remove
the notion of a shared debugger refcount. The debugger is either
initialized or uninitialized now, and calling Initialize() multiple
times will simply have no effect, while the first Terminate() will
now shut it down no matter how many times Initialize() was called.
This behaves nicely with all of our supported usage patterns though,
and allows us to fix a number of nasty hacks from before.
Differential Revision: http://reviews.llvm.org/D8462
llvm-svn: 233758
I am fixing this by:
1 - make sure we aren't trying to set the symbol file for a module to the same thing it already has and leaving it alone if it is the same
2 - keep all old symbol files around in the module in case there are any outstanding type references
<rdar://problem/18029116>
llvm-svn: 233757
A char can have signed and unsigned encoding but previously lldb always
assumed it is signed. This CL adds a logic to detect the encoding of
'char' types based on the default encoding on the target architecture.
It fixes variable printing and expression evaluation on architectures
where 'char' is signed by default.
Differential revision: http://reviews.llvm.org/D8636
llvm-svn: 233682
Summary:
Presently, if a log file already exists, lldb simply starts overwriting bits of it, without
truncating or anything. This patch makes it use eFileOptionFileTruncate by default. It also adds
an --append option, which will append to the file without truncating. A test is included.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D8450
llvm-svn: 232801
This creates a new top-level folder called Initialization which
is intended to hold code specific to LLDB system initialization.
Currently this holds the Initialize() and Terminate() functions,
as well as the fatal error handler.
This provides a means to break the massive dependency cycle which
is caused by the fact that Debugger depends on Initialize and
Terminate which then depends on the entire LLDB project. With
this structure, it will be possible for applications to invoke
lldb_private::Initialize() directly, and have that invoke
Debugger::Initialize.
llvm-svn: 232768
Specifically, there were some functions for converting enums
to strings and a function for matching a string using a specific
matching algorithm. This moves those functions to more appropriate
headers in lldb/Utility and updates references to include the
new headers.
llvm-svn: 232673
So that we don't have to update every single #include in the entire
codebase to #include this new header (which used to get included by
lldb-private-log.h, we automatically #include "Logging.h" from
within "Log.h".
llvm-svn: 232653
This removes ScriptInterpreterObject from the codebase completely.
Places that used to rely on ScriptInterpreterObject now use
StructuredData::Object and its derived classes. To support this,
a new type of StructuredData object is introduced, called
StructuredData::Generic, which stores a void*. Internally within
the python library, StructuredPythonObject subclasses this
StructuredData::Generic class so that it can addref and decref
the python object on construction and destruction.
Additionally, all of the classes in PythonDataObjects.h such
as PythonList, PythonDictionary, etc now provide a method to
create an instance of the corresponding StructuredData type. For
example, there is PythonDictionary::CreateStructuredDictionary.
To eliminate dependencies on PythonDataObjects for external
callers, all ScriptInterpreter methods now return only
StructuredData classes
The rest of the changes in this CL are focused on fixing up
users of PythonDataObjects classes to use the new StructuredData
classes.
llvm-svn: 232534
Summary:
There was a race condition regarding the output of the inferior process. The reading of the
output is performed on a separate thread, and there was no guarantee that the output will get
eventually consumed. Because of that, it was happening that calling Process::GetSTDOUT was not
returning anything even though the process was terminated and would definitely not produce any
further output. This was usually happening only under very heavy system load, but it can be
reproduced by placing an usleep in the stdio thread (Process::STDIOReadThreadBytesReceived).
This patch addresses this by adding synchronization capabilities to the Communication thread.
After calling Communication::SynchronizeWithReadThread one can be sure that all pending input has
been processed by the read thread. This function is then called after every public event which
stops the process to obtain the entire process output.
Test Plan: TestProcessIO.py should now succeed every time instead of flaking in and out.
Reviewers: clayborg, jingham
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D8246
llvm-svn: 232023
After http://reviews.llvm.org/D8133 landed as r231550 process launch on remote platform stopped working.
This adds Debugger::InitializeForLLGS and tracks whether one or both of Initialize and InitializeForLLGS have been called, calling only the corresponding lldb_private::Terminate* methods as necessary. Since lldb_private::Terminate calls lldb_private::TerminateForLLGS, the latter method may be called twice if Initialize was called for both however the terminate methods ensure they are only called once after being initialized.
This still maintains the reduced binary size, though it does now technically link in lldb_private::Terminate on lldb-server even though this should never be called.
This should resolve the issue raised in http://reviews.llvm.org/D8133 where Debugger::Terminate assumed that there were 0 references to debugger and terminated early.
Differential Revision: http://reviews.llvm.org/D8183
llvm-svn: 231808
This removes Host::Backtrace from the codebase, and changes all
call sites to use llvm::sys::PrintStackTrace(). This makes the
functionality available for all platforms, and even for platforms
which currently had a supported implementation of Host::Backtrace,
this patch should enable richer information in stack traces, such
as file and line number information, as well as giving it the
ability to unwind through inlined functions.
llvm-svn: 231511
This is part of a larger effort to reduce header file footprints.
Combined, these patches reduce the build time of LLDB locally by
over 30%. However, they touch many files and make many changes,
so will be submitted in small incremental pieces.
Reviewed By: Greg Clayton
Differential Revision: http://reviews.llvm.org/D8022
llvm-svn: 231097
Summary:
The code for GetSyntheticArrayMemberFromPointer and
GetSyntheticArrayMemberFromArray was identical, so just collapse the
the methods into one.
Reviewers: granata.enrico, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7911
llvm-svn: 230708
Summary:
http://llvm.org/bugs/show_bug.cgi?id=20400
The default triple of i686-pc-linux-gnu for 32 bit linux targets is compatible
but not necessarily identical to the inferior binaries.
Applying Azat Khuzhin's solution of using ArchSpec::IsCompatibleMatch() instead
of ArchSpec::IsExactMatch() when comparing ObjectFile and Modules architecture.
Reviewers: vharron
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7897
llvm-svn: 230694
llvm::StringRef doesn't make a copy of a string, it just holds a
reference. When special_directions_stream went out of scope,
special_directions was holding on to a stale pointer.
Moving special_directions_stream into a higher scope to keep
special_directions pointing to a valid string.
llvm-svn: 229767
changing it was in r219544 - after living on that for a few
months, I wanted to take another crack at this.
The disassembly-format setting still exists and the old format
can be user specified with a setting like
${current-pc-arrow}${addr-file-or-load}{ <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>}:
This patch was discussed in http://reviews.llvm.org/D7578
<rdar://problem/19726421>
llvm-svn: 229186
There was a test in the test suite that was triggering the backtrace logging output that requested that the client pass an execution context. Sometimes we need the process for Objective C types because our static notion of the type might not align with the reality when being run in a live runtime.
Switched from an "ExecutionContext *" to an "ExecutionContextScope *" for greater ease of use.
llvm-svn: 228892
A runtime support value is a ValueObject whose only purpose is to support some language runtime's operation, but it does not directly provide any user-visible benefit
As such, unless the user is working on the runtime support, it is mostly safe for them not to see such a value when debugging
It is a language runtime's job to check whether a ValueObject is a support value, and that - in conjunction with a target setting - is used by frame variable and target variable
SBFrame::GetVariables gets a new overload with yet another flag to dictate whether to return those support values to the caller - that which defaults to the setting's value
rdar://problem/15539930
llvm-svn: 228791
only execute thumb instructions, force the arch triple string to
be "thumbv..." instead of "armv..." so we do the right thing by
default when disassembling arbitrary chunks of code.
<rdar://problem/15126397>
llvm-svn: 228486
Summary:
This commit adds a new open flag File::eOpenOptionCloseOnExec (i.e., O_CLOEXEC), and adds it to
the list of flags when opening log files (#ifndef windows). A regression test is included.
Reviewers: vharron, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7412
llvm-svn: 228310
Background: dyld binaries often have extra symbols in their symbol table like "malloc" and "free" for the early bringup of dyld and we often don't want to set breakpoints in dynamic linker binaries. We also don't want to call the "malloc" or "free" function in dyld when a user writes an expression like "(void *)malloc(123)" so we need to avoid doing name lookups in dyld. We mark Modules as being dynamic link editors and this helps do correct lookups for breakpoints by name and function lookups.
<rdar://problem/19716267>
llvm-svn: 228261
Why? Debugger::FormatPrompt() would run through the format prompt every time and parse it and emit it piece by piece. It also did formatting differently depending on which key/value pair it was parsing.
The new code improves on this with the following features:
1 - Allow format strings to be parsed into a FormatEntity::Entry which can contain multiple child FormatEntity::Entry objects. This FormatEntity::Entry is a parsed version of what was previously always done in Debugger::FormatPrompt() so it is more efficient to emit formatted strings using the new parsed FormatEntity::Entry.
2 - Allows errors in format strings to be shown immediately when setting the settings (frame-format, thread-format, disassembly-format
3 - Allows auto completion by implementing a new OptionValueFormatEntity and switching frame-format, thread-format, and disassembly-format settings over to using it.
4 - The FormatEntity::Entry for each of the frame-format, thread-format, disassembly-format settings only replaces the old one if the format parses correctly
5 - Combines all consecutive string values together for efficient output. This means all "${ansi.*}" keys and all desensitized characters like "\n" "\t" "\0721" "\x23" will get combined with their previous strings
6 - ${*.script:} (like "${var.script:mymodule.my_var_function}") have all been switched over to use ${script.*:} "${script.var:mymodule.my_var_function}") to make the format easier to parse as I don't believe anyone was using these format string power user features.
7 - All key values pairs are defined in simple C arrays of entries so it is much easier to add new entries.
These changes pave the way for subsequent modifications where we can modify formats to do more (like control the width of value strings can do more and add more functionality more easily like string formatting to control the width, printf formats and more).
llvm-svn: 228207
This was causing code that opened multiple targets to try and get a path to debugserver from the GDB remote communication class, and it would get the LLDB path and some instances would return empty strings and it would cause debugserver to not be found.
<rdar://problem/18756927>
llvm-svn: 227935
And since enough of these are doing the right thing, add a test case to verify we are doing the right thing with freeze drying ObjC object types
Fixes rdar://18092770
llvm-svn: 227282
This is necessary because the byte size of an ObjC class type is not reliably statically knowable (e.g. because superclasses sit deep in frameworks that we have no debug info for)
The lack of reliable size info is a problem when trying to freeze-dry an ObjC instance (not the pointer, the pointee)
This commit lays the foundation for having language runtimes help in figuring out byte sizes, and having ClangASTType ask for runtime help
No feature change as no runtime actually implements the logic, and nowhere is an ExecutionContext passed in yet
llvm-svn: 227274
Without this overload, attempts to edit the value of a variable with synthetic children enabled would change the value inside the synthetic ValueObject, but not propagate the changes to the underlying storage, hence resulting in no write for any meaningful purpose
Comes with a test case, and fixes rdar://19586311
llvm-svn: 227120
This matches the behavior of the default constructor, so is
technically more correct.
Patch by Chaoren Lin
Differential Revision: http://reviews.llvm.org/D7113
llvm-svn: 226851
When you create a target, it tries to look for the platform's list
of supported architectures for a match. The match it finds can
contain specific triples, like i386-pc-windows-msvc. Later, we
overwrite this value with the most generic triple that can apply
to any platform with COFF support, causing some of the fields of
the triple to get overwritten.
This patch changes the behavior to only merge in values from the COFF
triple if the fields of the matching triple were unknown/unspecified
to begin with.
This fixes load address resolution on Windows, since it enables the
DynamicLoaderWindows to be used instead of DynamicLoaderStatic.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D7120
llvm-svn: 226849
Since REG_ENHANCED is available on MacOSX, this allow the use of \d (digits) \b (word boundaries) and much more without affecting other systems.
<rdar://problem/12082562>
llvm-svn: 226704
Most of the time, we can use context information just fine to choose a language (i.e. the language of the frame that the root object was defined in, if any); but in some cases, synthetic children may be fabricated as root frame-less entities, and then we wouldn't know any better
This patch allows (internal) synthetic child providers to set a display language on the children they generate, should they so choose
llvm-svn: 226634
This function returns a URI of the resource that the connection is connected to. This is especially important for connections established by accepting a connection from a remote host.
Also added implementations for ConnectionMachPort, ConnectionSharedMemory,
Also fixed up some documentation in Connection::Write
Renamed ConnectionFileDescriptorPosix::SocketListen to ConnectionFileDescriptorPosix::SocketListenAndAccept
Fixed a log message in Socket.cpp
Differential Review: http://reviews.llvm.org/D7026
llvm-svn: 226362
The refactor was motivated by some comments that Greg made
http://reviews.llvm.org/D6918
and also to break a dependency cascade that caused functions linking
in string->int conversion functions to pull in most of lldb
llvm-svn: 226199
moved into the #else branch of the #if/#elif/#endif, so it wasn't getting done in the #if case anymore.
Keep the code to add the demangled name outside of the #if, and then just free the demangled_name
and set it back to NULL in the Windows case.
<rdar://problem/19479499>
llvm-svn: 226088
This is done by adding a "Variable *" to SymbolContext and allowing SymbolFile::ResolveSymbolContext() so if an address is resolved into a symbol context, we can include the global or static variable for that address.
This means you can now find global variables that are merged globals when doing a "image lookup --verbose --address 0x1230000". Previously we would resolve a symbol and show "_MergedGlobals123 + 1234". But now we can show the global variable name.
The eSymbolContextEverything purposely does not include the new eSymbolContextVariable in its lookup since stack frame code does many lookups and we don't want it triggering the global variable lookups.
<rdar://problem/18945678>
llvm-svn: 226084
The default help display now shows the alias collection by default, and hides commands whose named begin with an underscore. Help is primarily useful to those unfamiliar with LLDB and should aim to answer typical questions while still being able to provide more esoteric answers when required. To that latter end an argument to include the hidden commands in help has been added, and instead of having a help flag to show aliases there is now one to hide them. This final change might be controversial as it repurposes the -a shorthand as the opposite of its original meaning.
The previous implementation of OutputFormattedHelpText was easily confused by embedded newlines. The new algorithm correctly breaks on the FIRST newline or LAST space/tab before the target column count rather than treating all whitespace interchangeably.
Command interpreters now have the ability to specify help prologue text and a command prefix string. Neither are used in the current LLDB sources but are required to support REPL-like extensions where LLDB commands must be prefixed and additional help text is required to explain how to access traditional debugging commands.
<rdar://problem/17751929>
<rdar://problem/16953815>
<rdar://problem/16953841>
<rdar://problem/16930173>
<rdar://problem/16879028>
llvm-svn: 226068
I have been seeing a few crashes where LLDB tries to acquire a cached synthetic child by index, and crashes in the ClusterManager obtaining a shared_ptr for that ValueObject
That kind of crash most often means that I am holding on to a raw pointer to a ValueObject that was let go from the cluster
The main way that could happen is that the synthetic provider is being updated at the same time that some child is being accessed from the previous provider state
This fixes the problem by making the children be stored in a thread-safe map
Fixes rdar://18627964
llvm-svn: 225538
It also comes with a (rudimentary) test case that gets itself in a failed update scenario, and checks that we don't crash
This is the easiest case I could think of that forces the failed update case Zachary was seeing
llvm-svn: 225463
The issue was we had a global variable that was a pointer, and the address type of the children wasn't "load address" when it needed to be. Full details are in the comments of the changes.
<rdar://problem/15107937>
llvm-svn: 224559
Function pointers had a summary generated for them bypassing formatters, directly as part of the ValueObject subsystem
This patch transitions that code into a hardcoded summary
llvm-svn: 223906
The issue with Thumb IT (if/then) instructions is the IT instruction preceeds up to four instructions that are made conditional. If a breakpoint is placed on one of the conditional instructions, the instruction either needs to match the thumb opcode size (2 or 4 bytes) or a BKPT instruction needs to be used as these are always unconditional (even in a IT instruction). If BKPT instructions are used, then we might end up stopping on an instruction that won't get executed. So if we do stop at a BKPT instruction, we need to continue if the condition is not true.
When using the BKPT isntructions are easy in that you don't need to detect the size of the breakpoint that needs to be used when setting a breakpoint even in a thumb IT instruction. The bad part is you will now always stop at the opcode location and let LLDB determine if it should auto-continue. If the BKPT instruction is used, the BKPT that is used for ARM code should be something that also triggers the BKPT instruction in Thumb in case you set a breakpoint in the middle of code and the code is actually Thumb code. A value of 0xE120BE70 will work since the lower 16 bits being 0xBE70 happens to be a Thumb BKPT instruction.
The alternative is to use trap or illegal instructions that the kernel will translate into breakpoint hits. On Mac this was 0xE7FFDEFE for ARM and 0xDEFE for Thumb. The darwin kernel currently doesn't recognize any 32 bit Thumb instruction as a instruction that will get turned into a breakpoint exception (EXC_BREAKPOINT), so we had to use the BKPT instruction on Mac. The linux kernel recognizes a 16 and a 32 bit instruction as valid thumb breakpoint opcodes. The benefit of using 16 or 32 bit instructions is you don't stop on opcodes in a IT block when the condition doesn't match.
To further complicate things, single stepping on ARM is often implemented by modifying the BCR/BVR registers and setting the processor to stop when the PC is not equal to the current value. This means single stepping is another way the ARM target can stop on instructions that won't get executed.
This patch does the following:
1 - Fix the internal debugserver for Apple to use the BKPT instruction for ARM and Thumb
2 - Fix LLDB to catch when we stop in the middle of a Thumb IT instruction and continue if we stop at an instruction that won't execute
3 - Fixes this in a way that will work for any target on any platform as long as it is ARM/Thumb
4 - Adds a patch for ignoring conditions that don't match when in ARM mode (see below)
This patch also provides the code that implements the same thing for ARM instructions, though it is disabled for now. The ARM patch will check the condition of the instruction in ARM mode and continue if the condition isn't true (and therefore the instruction would not be executed). Again, this is not enable, but the code for it has been added.
<rdar://problem/19145455>
llvm-svn: 223851
Because of the way they are created, synthetic children cannot (in general) have a sane expression path
A solution to this would be letting the parent front-end generate expression paths for its children
Doing so requires a significant amount of refactoring, and might not always lead to better results (esp. w.r.t. C++ templates)
This commit takes a simpler approach:
- if a synthetic child is of pointer type and it's a target pointer, then emit *((T)value)
- if a synthetic child is a non-pointer, but its location is in the target, then emit *((T*)loadAddr)
- if a synthetic child has a value, emit ((T)value)
- else, don't emit anything
Fixes rdar://18442386
llvm-svn: 223836
track of the checksum of the object so we can
track if it is modified. This fixes a testcase
(test/expression_command/issue_11588) on OS X.
Patch by Enrico Granata.
llvm-svn: 223830
- adds a new flag to mark ValueObjects as "synthetic children generated"
- vends new Create functions as part of the SyntheticChildrenFrontEnd that set the flag automatically
- moves synthetic child providers over to using these new functions
No visible feature change, but preparatory work for feature change
llvm-svn: 223819
Such a persisted version is equivalent to evaluating the value via the expression evaluator, and holding on to the $n result of the expression, except this API can be used on SBValues that do not obviously come from an expression (e.g. are the result of a memory lookup)
Expose this via SBValue::Persist() in our public API layer, and ValueObject::Persist() in the lldb_private layer
Includes testcase
Fixes rdar://19136664
llvm-svn: 223711
in the "dummy-target". The dummy target breakpoints prime all future
targets. Breakpoints set before any target is created (e.g. breakpoints
in ~/.lldbinit) automatically get set in the dummy target. You can also
list, add & delete breakpoints from the dummy target using the "-D" flag,
which is supported by most of the breakpoint commands.
This removes a long-standing wart in lldb...
<rdar://problem/10881487>
llvm-svn: 223565
format for the not-current-stack-frame. This was causing
test/functionalities/inferior-assert to fail.
Also document the new additions to the format specifications used
in the disassembly-format changes to formats.html.
<rdar://problem/19102757>
llvm-svn: 223096
% lldb /bin/nonono
(lldb) target create "/bin/nonono"
error: unable to find executable for '/usr/bin/nonono'
<deadlock>
The problem was the initial commands 'target create "/bin/nonono"' were put into a pipe and the command interpreter was being run with:
void
CommandInterpreter::RunCommandInterpreter(bool auto_handle_events,
bool spawn_thread,
CommandInterpreterRunOptions &options)
{
// Always re-create the command intepreter when we run it in case
// any file handles have changed.
bool force_create = true;
m_debugger.PushIOHandler(GetIOHandler(force_create, &options));
m_stopped_for_crash = false;
if (auto_handle_events)
m_debugger.StartEventHandlerThread();
if (spawn_thread)
{
m_debugger.StartIOHandlerThread();
}
else
{
m_debugger.ExecuteIOHanders();
if (auto_handle_events)
m_debugger.StopEventHandlerThread();
}
}
If "auto_handle_events" was set to true and "spawn_thread" was false, we would execute:
m_debugger.StartEventHandlerThread();
m_debugger.ExecuteIOHanders();
m_debugger.StopEventHandlerThread();
The problem was there was no synchonization in Debugger::StartEventHandlerThread() to ensure the event handler was listening to events and the the call to "m_debugger.StopEventHandlerThread()" would do:
void
Debugger::StopEventHandlerThread()
{
if (m_event_handler_thread.IsJoinable())
{
GetCommandInterpreter().BroadcastEvent(CommandInterpreter::eBroadcastBitQuitCommandReceived);
m_event_handler_thread.Join(nullptr);
}
}
The problem was that the event thread might not be listening for the CommandInterpreter::eBroadcastBitQuitCommandReceived event yet.
The solution is to make sure the Debugger::DefaultEventHandler() is listening to events before we return from Debugger::StartEventHandlerThread(). Once we have this synchonization we remove the race condition.
This fixes radar:
<rdar://problem/19041192>
llvm-svn: 223083
(e.g. breakpoints, stop-hooks) before we have any targets - for instance in
your ~/.lldbinit file. These will then get copied over to any new targets
that get created. So far, you can only make stop-hooks.
Breakpoints will have to learn to move themselves from target to target for
us to get them from no-target to new-target.
We should also make a command & SB API way to prime this ur-target.
llvm-svn: 222600
Editline does not work correctly on Windows. This goes back at
least to r208369, and as a result r210105 was submitted to disable
libedit at runtime on Windows.
More recently, r222163 was submitted which re-writes editline
entirely, but makes the situation even worse on Windows, to the
point that it doesn't even compile. While it would be easy to
fix the compilation failure, this patch simply stops compiling
Editline entirely on Windows, as the simple compilation fix would
still result in a broken use of select on Windows, and as such a
broken implementation of Editline.
Since Editline was already disabled to begin with on Windows, we
don't attempt to fix the compilation failure or the underlying
issues, and instead just disable it "even more".
llvm-svn: 222177
Improvements include:
* Use of libedit's wide character support, which is imperfect but a distinct improvement over ASCII-only
* Fallback for ASCII editing path
* Support for a "faint" prompt clearly distinguished from input
* Breaking lines and insert new lines in the middle of a batch by simply pressing return
* Joining lines with forward and backward character deletion
* Detection of paste to suppress automatic formatting and statement completion tests
* Correctly reformatting when lines grow or shrink to occupy different numbers of rows
* Saving multi-line history, and correctly preserving the "tip" of history during editing
* Displaying visible ^C and ^D indications when interrupting input or sending EOF
* Fledgling VI support for multi-line editing
* General correctness and reliability improvements
llvm-svn: 222163
relative paths, like:
/whatever/llvm/lib/Sema/../../include/llvm/Sema/
That causes problems with our type uniquing, since we use the declaration file
and line as one component of the uniquing, and different ways of getting to the
same file will have different directory spellings, though they are functionally
equivalent. We end up with two copies of the exact same type because of this,
and that makes the expression parser give "duplicate type" errors.
I added a method to resolve paths with ../ in them and used that in the FileSpec::Equals,
for comparing Declarations and for doing Breakpoint compares as well, since they also
suffer from this if you specify breakpoints by full path (since nobody knows what
../'s to insert...)
<rdar://problem/18765814>
llvm-svn: 222075
ObjectFileMachO. It's close but we seem to be missing some
of the memory region segments - not exactly sure how that's
happening. The register context writing into the LC_THREAD
load commands is working correctly though.
Slightly reordered the arm64 definitions in ArchSpec.cpp so
when we look for an arm64 core file definiton we're getting
a cpu subtype of CPU_ANY which we can't put in the mach
header of a core file. Make the first definition we find by
linear search have the currently correct '1' cpu subtype.
llvm-svn: 221743
I went back and forth on removing this - and tried dropping it for
a few weeks. But when you're working at an assembly language, it
really is helpful to have this displayed to show where the current
pc is.
llvm-svn: 221682
Two flags are introduced:
- preferred display language (as in, ObjC vs. C++)
- summary capping (as in, should a limit be put to the amount of data retrieved)
The meaning - if any - of these options is for individual formatters to establish
The topic of a subsequent commit will be to actually wire these through to individual data formatters
llvm-svn: 221482
The recent StringPrinter changes made this behavior the default, and the setting defaults to yes
If you want to change this behavior and see non-printables unescaped (e.g. "a\tb" as "a b"), set it to false
Fixes rdar://12969594
llvm-svn: 221399
the runtime rather than trying to fix it up,
because now those types have ivars regardless of
whether they come from "frame variable" or from
expressions.
Patch by Enrico Granata.
llvm-svn: 220982
Summary:
Ed Maste found some problems with the commit in D5988. Address most of these.
While here, also add floating point return handling. This doesn't handle
128-bit long double yet. Since I don't have any system that uses it, I don't
currently have plans to implement it.
Reviewers: emaste
Reviewed By: emaste
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D6049
llvm-svn: 220963
better output when we don't have any symbol name.
It looked like this:
0x1097fd029 <ud2
0x1097fd02b <addb %al, (%rax)
now, like this:
0x10cdd3064: ud2
0x10cdd3066: addb %al, (%rax)
<rdar://problem/18833391>
llvm-svn: 220948
Summary:
This adds preliminary support for PowerPC/PowerPC64, for FreeBSD. There are
some issues still:
* Breakpoints don't work well on powerpc64.
* Shared libraries don't yet get loaded for a 32-bit process on powerpc64 host.
* Backtraces don't work. This is due to PowerPC ABI using a backchain pointer
in memory, instead of a dedicated frame pointer register for the backchain.
* Breakpoints on functions without debug info may not work correctly for 32-bit
powerpc.
Reviewers: emaste, tfiala, jingham, clayborg
Reviewed By: clayborg
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D5988
llvm-svn: 220944
This works similarly to the {thread/frame/process/target.script:...} feature - you write a summary string, part of which is
${var.script:someFuncName}
someFuncName is expected to be declared as
def someFuncName(SBValue,otherArgument) - essentially the same as a summary function
Since . -> [] are the only allowed separators, and % is used for custom formatting, .script: would not be a legitimate symbol anyway, which makes this non-ambiguous
llvm-svn: 220821
To do this, I fixed the CPPLanguageRuntime::StripNamespacesFromVariableName() function to use a regular expression that correctly determines if the name passed to it is a qualfied C++ name like "a:🅱️:c" or "b::c". The old version of this function was treating '__54-[NSUserScriptTask executeWithInterpreter:arguments::]_block_invoke' as a match with a basename of ']_block_invoke'.
Also fixed a case in the by name lookup of functions where we wouldn't look for the full name if we actually tried to call CPPLanguageRuntime::StripNamespacesFromVariableName() and got an empty basename back.
<rdar://problem/18527866>
llvm-svn: 220432
There were many issues with synchronous mode that we discovered when started to try and add a "batch" mode. There was a race condition where the event handling thread might consume events when in sync mode and other times the Process::WaitForProcessToStop() would consume them. This also led to places where the Process IO handler might or might not get popped when it needed to be.
llvm-svn: 220254
unreachable so we don't get warnings about them.
Completely initialize a structure instead of leaving some of its fields
potentially indeterminate (although in reality they would all be set
before use -- but the compiler warning doesn't know that).
clang warning.
llvm-svn: 220017
Reviewed at http://reviews.llvm.org/D5592
This patch gives LLDB some ability to interact with AddressSanitizer runtime library, on top of what we already have (historical memory stack traces provided by ASan). Namely, that's the ability to stop on an error caught by ASan, and access the report information that are associated with it. The report information is also exposed into SB API.
More precisely this patch...
adds a new plugin type, InstrumentationRuntime, which should serve as a generic superclass for other instrumentation runtime libraries, these plugins get notified when modules are loaded, so they get a chance to "activate" when a specific dynamic library is loaded
an instance of this plugin type, AddressSanitizerRuntime, which activates itself when it sees the ASan dynamic library or founds ASan statically linked in the executable
adds a collection of these plugins into the Process class
AddressSanitizerRuntime sets an internal breakpoint on __asan::AsanDie(), and when this breakpoint gets hit, it retrieves the report information from ASan
this breakpoint is then exposed as a new StopReason, eStopReasonInstrumentation, with a new StopInfo subclass, InstrumentationRuntimeStopInfo
the StopInfo superclass is extended with a m_extended_info field (it's a StructuredData::ObjectSP), that can hold arbitrary JSON-like data, which is the way the new plugin provides the report data
the "thread info" command now accepts a "-s" flag that prints out the JSON data of a stop reason (same way the "-j" flag works now)
SBThread has a new API, GetStopReasonExtendedInfoAsJSON, which dumps the JSON string into a SBStream
adds a test case for all of this
I plan to also get rid of the original ASan plugin (memory history stack traces) and use an instance of AddressSanitizerRuntime for that purpose.
Kuba
llvm-svn: 219546
output style can be customized. Change the built-in default to be
more similar to gdb's disassembly formatting.
The disassembly-format for a gdb-like output is
${addr-file-or-load} <${function.name-without-args}${function.concrete-only-addr-offset-no-padding}>:
The disassembly-format for the lldb style output is
{${function.initial-function}{${module.file.basename}`}{${function.name-without-args}}:\n}{${function.changed}\n{${module.file.basename}`}{${function.name-without-args}}:\n}{${current-pc-arrow} }{${addr-file-or-load}}:
The two backticks in the lldb style formatter triggers the sub-expression evaluation in
CommandInterpreter::PreprocessCommand() so you can't use that one as-is ... changing to
use ' characters instead of ` would work around that.
<rdar://problem/9885398>
llvm-svn: 219544
The way to do this is to write a synthetic child provider for your type, and have it vend the (optional) get_value function.
If get_value is defined, and it returns a valid SBValue, that SBValue's value (as in lldb_private::Value) will be used as the synthetic ValueObject's Value
The rationale for doing things this way is twofold:
- there are many possible ways to define a "value" (SBData, a Python number, ...) but SBValue seems general enough as a thing that stores a "value", so we just trade values that way and that keeps our currency trivial
- we could introduce a new level of layering (ValueObjectSyntheticValue), a new kind of formatter (synthetic value producer), but that would complicate the model (can I have a dynamic with no synthetic children but synthetic value? synthetic value with synthetic children but no dynamic?), and I really couldn't see much benefit to be reaped from this added complexity in the matrix
On the other hand, just defining a synthetic child provider with a get_value but returning no actual children is easy enough that it's not a significant road-block to adoption of this feature
Comes with a test case
llvm-svn: 219330
This is the first step in getting ConnectionFileDescriptor ported
to Windows. It implements a connection against a disk file for
windows. This supports connection strings of the form file://PATH
which are currently supported only on posix platforms in
ConnectionFileDescriptor.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D5608
llvm-svn: 219145
As part of getting ConnectionFileDescriptor working on Windows,
there is going to be alot of platform specific work to be done.
As a result, the implementation is moving into Host. This patch
performs the code move and fixes up call-sites appropriately.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D5548
llvm-svn: 219143
works, as do breakpoints, run and pause, display zeroth frame.
See
http://reviews.llvm.org/D5503
for a fuller description of the changes in this commit.
llvm-svn: 218596
See http://reviews.llvm.org/D5495 for more details.
These are changes that are part of an effort to support building llgs, within the AOSP source tree, using the Android.mk
build system, when using the llvm/clang/lldb git repos from AOSP replaced with the experimental ones currently in
github.com/tfiala/aosp-{llvm,clang,lldb,compiler-rt}.
llvm-svn: 218568
was broken in r214984 by the addition of an unconditional error
return at the start of the code block handling this method. Remove
the errant lines.
<rdar://problem/18416691>
llvm-svn: 218291
Changes include:
- fix it so you can select the "host" platform using "platform select host"
- change all callbacks that create platforms to returns shared pointers
- fix TestImageListMultiArchitecture.py to restore the "host" platform by running "platform select host"
- Add a new "PlatformSP Platform::Find(const ConstString &name)" method to get a cached platform
- cache platforms that are created and re-use them instead of always creating a new one
llvm-svn: 218145
This patch moves creates a thread abstraction that represents a
thread running inside the LLDB process. This is a replacement for
otherwise using lldb::thread_t, and provides a platform agnostic
interface to managing these threads.
Differential Revision: http://reviews.llvm.org/D5198
Reviewed by: Jim Ingham
llvm-svn: 217460
LLDB had implemented its own DynamicLibrary class for plugin
support. LLVM has an equivalent mechanism, so this patch deletes
the duplicated code in LLDB and updates LLDB to reference the
mechanism provided by LLVM.
llvm-svn: 216606
Add entries to core_definitions and elf_arch_entries for
those variants. Select the subtype for the variant by parsing
the e_flags field of the elf header.
llvm-svn: 216541
with binaries in the dyld shared cache (esp on iOS) where the file
address for the executable binary (maybe from memory, maybe from
an expanded copy of the dyld shared cache) is different from the
file address in the dSYM. In that case, ObjectFileMachO replaces
the file addresses from the original binary with the dSYM file
addresses (usually 0-based) -- lldb doesn't have a notion of two
file addresses for a given module so they need to agree.
There was a cache of file addresses over in the Symtab so I added
a method to the Module and the objects within to clear any file address
caches if they exist, and added an implementation in the Symtab
module to do that.
<rdar://problem/16929569>
llvm-svn: 216258
This continues the effort to get Host code moved over to HostInfo,
and removes many more instances of preprocessor defines along the
way.
llvm-svn: 216195
See this email thread:
http://lists.cs.uiuc.edu/pipermail/lldb-commits/Week-of-Mon-20140818/012487.html
This patch handles the case where the inferior process exits but leaves the ReadThread in a continuous loop reading from the communication pipe. On MacOSX, the ReadThread exits when it receives a 0 return value from the read due to EOF. On Linux the read returns -1 and sets errno to EIO error, this does not currently cause the thread to shutdown so it continues to read from the comm. In Communication::ReadThread I added a handler for eConnectionStatusError to disconnect and shutdown the thread.
Change by Alex Pepper.
llvm-svn: 216194
This patch creates a HostInfo class, a static class used to answer
basic queries about the host platform. As part of this change,
some functionality is moved from Host to HostInfo, and relevant
fixups are performed in the rest of the codebase.
This is part of a larger effort to isolate more code in the Host
layer into platform-specific groups, to make it easier to make
platform specific changes for a particular Host without breaking
other hosts.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D4963
llvm-svn: 215992
The select() API on Windows is not compatible with objects other
than sockets, so passing a descriptor for the command pipe to this
function is guaranteed to fail. ConnectionFileDescriptor is still
broken on Windows after this patch, but slightly less broken than
before.
llvm-svn: 215172
This patch moves the logic of many common socket operations into
its own class lldb_private::Socket. It then modifies the
ConnectionFileDescriptor class, and a few users of that class,
to use this new Socket class instead of hardcoding socket logic
directly.
Finally, this patch creates a common interface called IOObject for
any objects that support reading and writing, so that endpoints
such as sockets and files can be treated the same.
Differential Revision: http://reviews.llvm.org/D4641
Reviewed by: Todd Fiala, Greg Clayton
llvm-svn: 214984
DW_OP_fbreg(N) DW_OP_piece(4) DW_OP_fbreg(M) DW_OP_piece(8)
DW_OP_fbreg(N) DW_OP_piece(4) DW_OP_piece(8)
The first grabs 4 bytes from FP+N followed by 8 bytes from FP+M, the second grabs 4 bytes from FP+N followed by zero filling 8 bytes which are unavailable. Of course regiters are stuff supported:
DW_OP_reg3 DW_OP_piece(4) DW_OP_reg8 DW_OP_piece(8)
The fix does the following:
1 - don't push the full piece value onto the stack, keep it on the side
2 - fill zeros for DW_OP_piece(N) opcodes that have nothing on the stack (instead of previously consuming the full piece that was pushed onto the stack)
3 - simplify the logic
<rdar://problem/16930524>
llvm-svn: 214415
i386, i486, i486sx, and i686 are all indistinguishable as far as
PE/COFF files are concerned. This patch adds support for all of
these architectures to PlatformWindows.
Differential Revision: http://reviews.llvm.org/D4658
llvm-svn: 214092
We now catch the issue with a static_assert() at compile time and use llvm::array_lengthof(g_core_definitions) as well.
<rdar://problem/17767541>
llvm-svn: 213778
See the following llvm change for details:
r213743 | tnorthover | 2014-07-23 05:32:47 -0700 (Wed, 23 Jul 2014) | 9 lines
AArch64: remove arm64 triple enumerator.
This change fixes build breaks on Linux and MacOSX lldb.
llvm-svn: 213755
GCC warns on reinterpret_cast expressions involving a void-pointer
source and a pointer-to-function destination. Take a detour through
intptr_t to silence it.
Differential Revision: http://reviews.llvm.org/D4626
llvm-svn: 213691
Platforms which don't use LLDB's built-in demangler don't use the
'mangled_length' variable. Instead, replace it's only use by an
expression it is equivalent to.
Differential Revision: http://reviews.llvm.org/D4625
llvm-svn: 213681
The new implementation is located in source/Core/FastDemangle.cpp. It’s fairly straightforward C code with a few basic C++ extensions. It should compile with little or no change on a variety of platforms, but of course it is still only useful for symbols that comply with the Itanium ABI mangling spec (plus a few Clang extensions.)
<rdar://problem/15397553> <rdar://problem/15794867>
llvm-svn: 213671
1) Preserve ref qualification state in a local variable while parsing a nested name. Previously, the state was recorded in the shared db reference and could therefore be overwritten when parsing multiple levels of nested names (e.g.: when a qualified name has qualified template args.)
2) Address an off-by-one error when testing whether or not a thunk is non-virtual. This resulted in the demangled identifying all thunks as non-virtual.
llvm-svn: 213591
This change comprises of additions and some minor changes in order that
"kalimba" is listed as a supported platform and that debugging any
kalimbas results in PlatformKalimba being associated with the target.
The changes are as follows:
* The PlatformKalimba implementation itself
* A tweak to ArchSpec
* .note parsing for Kalimba in ObjectFileELF.cpp
* Plugin registration
* Makefile additions
Change by Matthew Gardiner
Minor tweak for cmake and Xcode by Todd Fiala
Tested:
Ubuntu 14.04 x86_64, clang 3.5-built lldb, all tests pass.
MacOSX 10.9.4, Xcode 6.0 Beta 1-built lldb, all tests pass.
llvm-svn: 213158
Fixes include:
- Don't say that "<arch>-apple-ios" is compatible with "<arch>-apple-macosx"
- Fixed DynamicLoaderMacOSXDYLD so specify an architecture that was converted solely from a cputype and subtype, just specify the file + UUID.
- Fixed PlatformiOSSimulator::GetSupportedArchitectureAtIndex() so it returns the correct archs
- Fixed SymbolFileDWARFDebugMap to load .o files correctly by just specifying the architecture without the vendor and OS now that "<arch>-apple-ios" is not compatible with "<arch>-apple-macosx" so we can load .o files correctly for DWARF with debug map
- Fixed the coded in TargetList::CreateTarget() so it does the right thing with an underspecified triple where just the arch is specified.
llvm-svn: 212783
Windows does support pipes, but they do so in a slightly different way. Added a Host layer which abstracts the use of pipes into a new Pipe class that everyone can use.
Windows benefits include:
- Being able to interrupt running processes when IO is directly hooked up
- being able to interrupt long running python scripts
- being able to interrupt anything based on ConnectionFileDescriptor
llvm-svn: 212220
off_t is a type which is used for file offsets. Even more
specifically, it is only used by a limited number of C APIs that
deal with files. Any usage of off_t where the variable is not
intended to be used with one of these APIs is a bug, by definition.
This patch corrects some easy mis-uses of off_t, generally by
converting them to lldb::offset_t, but sometimes by using other
types such as size_t, when appropriate.
The use of off_t to represent these offsets has worked fine in
practice on linux-y platforms, since we used _FILE_OFFSET_64 to
guarantee that off_t was a uint64. On Windows, however,
_FILE_OFFSET_64 is unrecognized, and off_t will always be 32-bit.
So the usage of off_t on Windows actually leads to legitimate bugs.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D4358
llvm-svn: 212192
This change brings in lldb-gdbserver (llgs) specifically for Linux x86_64.
(More architectures coming soon).
Not every debugserver option is covered yet. Currently
the lldb-gdbserver command line can start unattached,
start attached to a pid (process-name attach not supported yet),
or accept lldb attaching and launching a process or connecting
by process id.
The history of this large change can be found here:
https://github.com/tfiala/lldb/tree/dev-tfiala-native-protocol-linux-x86_64
Until mid/late April, I was not sharing the work and continued
to rebase it off of head (developed via id tfiala@google.com). I switched over to
user todd.fiala@gmail.com in the middle, and once I went to github, I did
merges rather than rebasing so I could share with others.
llvm-svn: 212069
Replace adhoc inline implementation of llvm::array_lengthof in favour of the
implementation in LLVM. This is simply a cleanup change, no functional change
intended.
llvm-svn: 211868
The patch is as is with the functionality left disabled for apple vendors because of performance regressions. If this is enabled it ends up searching for symbols in all shared libraries that are loadeded.
llvm-svn: 211638
The issue was when we called Debugger::RunIOHandler(), it would run the current IOHandler by activating it, and running it and then try to pop it and exit regardless of wether it was on top or not.
The new code will push the IOHandler that was passed in, and run the IOHandlers until the one passed in is successfully popped. This allows files for the "command source" to switch input handlers:
% cat /tmp/commands
br s -S alignLeftEdges:
br command add
bt
frame var
po self
DONE
b s -n main
br command add
bt
frame var
DONE
Note above we set a breakpoint, then add commands do it. The "br command add" will push the breakpoint comment gatherer until it sees "DONE" and then pop itself off the stack. The a new breakpoint will be set and it does the same thing again.
Now this file can be sourced from the command line:
% lldb -s /tmp/commands /path/to/a.out
And your breakpoints will be correctly setup!
<rdar://problem/17081650>
llvm-svn: 211329
lldb support. I'll be doing more testing & cleanup but I wanted to
get the initial checkin done.
This adds a new SBExpressionOptions::SetLanguage API for selecting a
language of an expression.
I added adds a new SBThread::GetInfoItemByPathString for retriving
information about a thread from that thread's StructuredData.
I added a new StructuredData class for representing
key-value/array/dictionary information (e.g. JSON formatted data).
Helper functions to read JSON and create a StructuredData object,
and to print a StructuredData object in JSON format are included.
A few Cocoa / Cocoa Touch data formatters were updated by Enrico
to track changes in iOS 8 / Yosemite.
Before we query a thread's extended information, the system runtime may
provide hints to the remote debug stub that it will use to retrieve values
out of runtime structures. I added a new SystemRuntime method
AddThreadExtendedInfoPacketHints which allows the SystemRuntime to add
key-value type data to the initial request that we send to the remote stub.
The thread-format formatter string can now retrieve values out of a thread's
extended info structured data. The default thread-format string picks up
two of these - thread.info.activity.name and thread.info.trace_messages.
I added a new "jThreadExtendedInfo" packet in debugserver; I will
add documentation to the lldb-gdb-remote.txt doc soon. It accepts
JSON formatted arguments (most importantly, "thread":threadnum) and
it returns a variety of information regarding the thread to lldb
in JSON format. This JSON return is scanned into a StructuredData
object that is associated with the thread; UI layers can query the
thread's StructuredData to see if key-values are present, and if
so, show them to the user. These key-values are likely to be
specific to different targets with some commonality among many
targets. For instance, many targets will be able to advertise the
pthread_t value for a thread.
I added an initial rough cut of "thread info" command which will print
the information about a thread from the jThreadExtendedInfo result.
I need to do more work to make this format reasonably.
Han Ming added calls into the pmenergy and pmsample libraries if
debugserver is run on Mac OS X Yosemite to get information about the
inferior's power use.
I added support to debugserver for gathering the Genealogy information
about threads, if it exists, and returning it in the jThreadExtendedInfo
JSON result.
llvm-svn: 210874
(lldb) file /bin/ls
(lldb) b malloc
(lldb) run
(lldb) process save-core /tmp/ls.core
Each ObjectFile plug-in now has the option to save core files by registering a new static callback.
llvm-svn: 210864
We preivously had two copies of ::BytesAvailable with only trivial
differences between them, and fixes have been applied to only one of
them.
Instead of duplicating the whole function, hide the FD_SET differences
behind a macro. This leaves only one small __APPLE__-specific #if
block, and fixes ^C on non-__APPLE__ platforms.
llvm-svn: 210592
Changes include:
- ObjectFileMachO can now determine if a binary is "*-apple-ios" or "*-apple-macosx" by checking the min OS and SDK load commands
- ArchSpec now says "<arch>-apple-macosx" is equivalent to "<arch>-apple-ios" since the simulator mixes and matches binaries (some from the system and most from the iOS SDK).
- Getting process inforamtion on MacOSX now correctly classifies iOS simulator processes so they have "*-apple-ios" architectures in the ProcessInstanceInfo
- PlatformiOSSimulator can now list iOS simulator processes correctly instead of showing nothing by using:
(lldb) platform select ios-simulator
(lldb) platform process list
- debugserver can now properly return "*-apple-ios" for the triple in the process info packets for iOS simulator executables
- GDBRemoteCommunicationClient now correctly passes along the triples it gets for process info by setting the OS in the llvm::Triple correctly
<rdar://problem/17060217>
llvm-svn: 209852
This fixes a number of trivial warnings in the Windows build. This is part of a larger effort to make the Windows build warning-free.
See http://reviews.llvm.org/D3914 for more details.
Change by Zachary Turner
llvm-svn: 209749
Rationale:
Pretty simply, the idea is that sometimes type names are way too long and contain way too many details for the average developer to care about. For instance, a plain ol' vector of int might be shown as
std::__1::vector<int, std::__1::allocator<....
rather than the much simpler std::vector<int> form, which is what most developers would actually type in their code
Proposed solution:
Introduce a notion of "display name" and a corresponding API GetDisplayTypeName() to return such a crafted for visual representation type name
Obviously, the display name and the fully qualified (or "true") name are not necessarily the same - that's the whole point
LLDB could choose to pick the "display name" as its one true notion of a type name, and if somebody really needs the fully qualified version of it, let them deal with the problem
Or, LLDB could rename what it currently calls the "type name" to be the "display name", and add new APIs for the fully qualified name, making the display name the default choice
The choice that I am making here is that the type name will keep meaning the same, and people who want a type name suited for display will explicitly ask for one
It is the less risky/disruptive choice - and it should eventually make it fairly obvious when someone is asking for the wrong type
Caveats:
- for now, GetDisplayTypeName() == GetTypeName(), there is no logic to produce customized display type names yet.
- while the fully-qualified type name is still the main key to the kingdom of data formatters, if we start showing custom names to people, those should match formatters
llvm-svn: 209072
Add a callback that will allow an expression to be cancelled between the
expression evaluation stages (for the ClangUserExpressions.)
<rdar://problem/16790467>, <rdar://problem/16573440>
llvm-svn: 207944
- CTRL+C wasn't clearing the command in lldb
- CTRL+C doesn't work in python macros in lldb
- Ctrl+C no longer interrupts the running process that you attach to
<rdar://problem/15949205>
<rdar://problem/16778652>
<rdar://problem/16774411>
llvm-svn: 207816
Currently if you run _any_ python, python has the "lldb.debugger" global variable and it has a strong reference to a lldb_private::Debugger since it is a lldb::SBDebugger object with a shared pointer.
This makes sure that your LLDB command interpreter history is saved each time you quit command line LLDB.
llvm-svn: 207164
Set the correct FormatManager revision before starting to figure out the new formatters
This can avoid entering some corner cases where as part of figuring out formatters we try to figure out dynamic types, and in turn that causes us to go back in trying to fetch new formatters - it is not only a futile exercise, it's also prone to endless recursion
This would only cause a behavior change if getting this chain started would eventually cause something to run and alter the formatters, a very unlikely if at all possible sequence of events
llvm-svn: 205928
TIDs are conventionally shown as decimal values on FreeBSD and Linux.
Thus, use the ${thread.id%tid} format string to display the thread ID,
instead of a fixed hex format.
llvm.org/pr19380
llvm-svn: 205912
This is a purely mechanical change explicitly casting any parameters for printf
style conversion. This cleans up the warnings emitted by gcc 4.8 on Linux.
llvm-svn: 205607
This is a mechanical change addressing the various sign comparison warnings that
are identified by both clang and gcc. This helps cleanup some of the warning
spew that occurs during builds.
llvm-svn: 205390
For some reason, the libc++ vector<bool> data formatter was essentially a costly no-up, doing everything required of it, except actually generating the child values!
This restores its functionality
llvm-svn: 205259
These changes were written by Greg Clayton, Jim Ingham, Jason Molenda.
It builds cleanly against TOT llvm with xcodebuild. I updated the
cmake files by visual inspection but did not try a build. I haven't
built these sources on any non-Mac platforms - I don't think this
patch adds any code that requires darwin, but please let me know if
I missed something.
In debugserver, MachProcess.cpp and MachTask.cpp were renamed to
MachProcess.mm and MachTask.mm as they picked up some new Objective-C
code needed to launch processes when running on iOS.
llvm-svn: 205113
For small structs, the frame format now prints them as one-liners
This follows the same definition that frame variable does for deciding what a "small struct" is, and as such should be fairly consistent with the variable display in general
llvm-svn: 204762
Add a GetFoundationVersion() to AppleObjCRuntime
This API is used to return and cache the major version of Foundation.framework, which is potentially a useful piece of data to key off of to enable or disable certain ObjC related behaviors (especially in data formatters)
llvm-svn: 204756
(lldb) b puts
(lldb) expr -g -i0 -- (int)puts("hello")
First we will stop at the entry point of the expression before it runs, then we can step over a few times and hit the breakpoint in "puts", then we can continue and finishing stepping and fininsh the expression.
Main features:
- New ObjectFileJIT class that can be easily created for JIT functions
- debug info can now be enabled when parsing expressions
- source for any function that is run throught the JIT is now saved in LLDB process specific temp directory and cleaned up on exit
- "expr -g --" allows you to single step through your expression function with source code
<rdar://problem/16382881>
llvm-svn: 204682
This is a mechanical cleanup of unused functions. In the case where the
functions are referenced (in comment form), I've simply commented out the
functions. A second pass to clean that up is warranted.
The functions which are otherwise unused have been removed. Some of these were
introduced in the initial commit and not in use prior to that point!
NFC
llvm-svn: 204310
TestPromptFormats appears as though it may be a useful unit test.
Unfortunately, there is no invocation mechanism in place right now. It is
unclear how to add a unit test for this scenario to the existing tests. It
would be ideal to remove this entirely, but I am hopeful that this can/will be
pulled out into a test still since it uses a user accessible interface.
llvm-svn: 204309
for customizing "step-in" behavior (e.g. step-in doesn't step into code with no debug info), but also
the behavior of step-in/step-out and step-over when they step out of the frame they started in.
I also added as a proof of concept of this reworking a mode for stepping where stepping out of a frame
into a frame with no debug information will continue stepping out till it arrives at a frame that does
have debug information. This is useful when you are debugging callback based code where the callbacks
are separated from the code that initiated them by some library glue you don't care about, among other
things.
llvm-svn: 203747
read during materialization. First of all, report
if we can't read the data for some reason. Second,
consult the ValueObject's error and report that if
there's some problem.
<rdar://problem/16074201>
llvm-svn: 202552
I carefully reviewed exactly how the IOHandlers interact and found places where we weren't properly controlling things. There should be no overlapping prompts and all output should now come out in a controlled fashion.
<rdar://problem/16111293>
llvm-svn: 202525
Revert the spirit of r199857 - a convincing case can be made that overriding a summary's format markers behind its back is not the right thing to do
This commit reverts the behavior of the code to the previous model, and changes the test case to validate the opposite of what it was validating before
llvm-svn: 201455
ObjectFile::SetLoadAddress (Target &target,
lldb::addr_t value,
bool value_is_offset);
Now "value" is a slide if "value_is_offset" is true, and "value" is an image base address otherwise. All previous usage of this API was using slides.
Updated the ObjectFileELF and ObjectFileMachO SetLoadAddress methods to do the right thing.
Also updated the ObjectFileMachO::SetLoadAddress() function to not load __LINKEDIT when it isn't needed and to only load sections that belong to the executable object file.
llvm-svn: 201003
Move some code that was in DynamicLoaderPOSIXDLYD into the
base class DynamicLoader. In the case of UpdateLoadedSections(),
the test to see whether a file is loadable (its address is zero)
is not generally applicable so that test is changed to a more
universally applicable check for the SHF_ALLOC flag on the section.
Also make it explicit that the reading of the module_id in
DynamicLoaderPOSIXDYLD::GetThreadLocalData() is using a hardcoded
size (of module_id) of 4, which might not be appropriate on
big-endian 64-bit systems, leaving a FIXME comment in place.
llvm-svn: 200939
- empty lines in init files would repeat previous command and cause errors to be displayed
- all options to control showing the command, its output, if it should stop on error or continue, weren't being obeyed.
llvm-svn: 200860
The many many benefits include:
1 - Input/Output/Error streams are now handled as real streams not a push style input
2 - auto completion in python embedded interpreter
3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use
4 - it is now possible to use curses to drive LLDB (please try the "gui" command)
We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases.
llvm-svn: 200263
GetU32 and GetU64, to use memcpy to copy bytes into a local buffer instead
of having a (uint64_t *) etc local variable, pointing to the address, and
dereferencing it. If compiled on a CPU where data alignment is required
(e.g. the LDM instruction on armv7) and we try to GetU64 out of a mmap'ed
DWARF file, that 8 byte quantity may not be world aligned and the program
can get an unaligned memory access fault.
<rdar://problem/15849231>
llvm-svn: 200069
ArchSpec now contains an optional distribution_id, with getters and
setters. Host::GetArchitecture () sets it on non-Apple platforms using
Host::GetDistributionId (). The distribution_id is ignored during
ArchSpec comparisons.
The gdb remote qHostInfo message transmits it, if set, via the
distribution_id={id-value} key/value pair. Updated gdb remote docs to
reflect this change.
As before, GetDistributionId () returns nothing on non-Linux platforms
at this time. On Linux, it is returned only if the lsb_platform
command is installed (in /bin or /usr/bin), and only if the
distributor id key is returned by 'lsb_platform -i'. This id is
lowercased, and whitespace is replaced with underscores.
llvm-svn: 199539
symbols correctly. There were a couple of pieces to this.
1) When a breakpoint location finds itself pointing to an Indirect symbol, when the site for it is created
it needs to resolve the symbol and actually set the site at its target.
2) Not all breakpoints want to do this (i.e. a straight address breakpoint should always set itself on the
specified address, so somem machinery was needed to specify that.
3) I added some info to the break list output for indirect symbols so you could see what was happening.
Also I made it clear when we re-route through re-exported symbols.
4) I moved ResolveIndirectFunction from ProcessPosix to Process since it works the exact same way on Mac OS X
and the other posix systems. If we find a platform that doesn't do it this way, they can override the
call in Process.
5) Fixed one bug in RunThreadPlan, if you were trying to run a thread plan after a "running" event had
been broadcast, the event coalescing would cause you to miss the ThreadPlan running event. So I added
a way to override the coalescing.
6) Made DynamicLoaderMacOSXDYLD::GetStepThroughTrampolinePlan handle Indirect & Re-exported symbols.
<rdar://problem/15280639>
llvm-svn: 198976
The "type format add" command gets a new flag --type (-t). If you pass -t <sometype>, upon fetching the value for an object of your type,
LLDB will display it as-if it was of enumeration type <sometype>
This is useful in cases of non-contiguous enums where there are empty gaps of unspecified values, and as such one cannot type their variables as the enum type,
but users would still like to see them as-if they were of the enum type (e.g. DWARF field types with their user-reserved ranges)
The SB API has also been improved to handle both types of formats, and a test case is added
llvm-svn: 198105
TypeFormatImpl used to just wrap a Format (and Flags for matching), and then ValueObject itself would do the printing deed
With this checkin, the responsibility of generating a value string is centralized in the data formatter (as it should, and already is for summaries)
This change is good practice per se, and should also enable us to extend the type format mechanism in a cleaner way
llvm-svn: 197874
Previously, an opcode set via SetOpcode32 (for example) was later
extracted via GetData() as a byte sequence in host order rather than
target order.
Review: http://llvm-reviews.chandlerc.com/D1838
llvm-svn: 196808
<rdar://problem/15314403>
This patch adds a new lldb_private::SectionLoadHistory class that tracks what shared libraries were loaded given a process stop ID. This allows us to keep a history of the sections that were loaded for a time T. Many items in history objects will rely upon the process stop ID in the future.
llvm-svn: 196557
This gets rid of our hacky "get_random_port()" which would grab a random port and tell debugserver to open that port. Now LLDB creates, binds, listens and accepts a connection by binding to port zero and sending the correctly bound port down as the host:port to connect back to.
Fixed the "ConnectionFileDescriptor" to be able to correctly listen for connections from a specified host, localhost, or any host. Prior to this fix "listen://" only accepted the following format:
listen://<port>
But now it can accept:
listen://<port> // Listen for connection from localhost on port <port>
listen://<host>:<port> // Listen for connection from <host> and <port>
listen://*:<port> // Listen for connection from any host on port <port>
llvm-svn: 196547
lldb_private::Debugger was #including some "lldb/API" header files which causes tools (lldb-platform and lldb-gdbserver) that link against the internals only (no API layer) to fail to link depending on which calls were being used.
Also fixed the current working directory so that it gets set correctly for remote test suite runs. Now the remote working directory is set to: "ARCH/TESTNUM/..." where ARCH is the current architecture name and "TESTNUM" is the current test number.
Fixed the "lldb-platform" and "lldb-gdbserver" to not warn about mismatched visibility settings by having each have their own exports file which contains nothing. This forces all symbols to not be exported, and also quiets the linker warnings.
llvm-svn: 196141
Rework data formatters matching algorithm
What happens now is that, for each category, the FormatNavigator generates all possible matches, and checks them one by one
Since the possible matches do not actually depend on the category (whether a match is accepted or not does, but that check can be shifted at a more convenient time),
it is actually feasible to generate every possible match upfront and then let individual categories just scan through those
This commit changes things by introducing a notion of formatters match candidate, and shifting responsibility for generating all of them given a (ValueObject,DynamicValueType) pair
from the FormatNavigator back to the FormatManager
A list of these candidates is then passed down to each category for matching
Candidates also need to remember whether they were generated by stripping pointers, references, typedefs, since this is something that individual formatters can choose to reject
This check, however, is conveniently only done once a "textual" match has been found, so that the list of candidates is truly category-independent
While the performance benefit is small (mostly, due to caching), this is much cleaner from a design perspective
llvm-svn: 195395
Example code:
remote_platform = lldb.SBPlatform("remote-macosx");
remote_platform.SetWorkingDirectory("/private/tmp")
debugger.SetSelectedPlatform(remote_platform)
connect_options = lldb.SBPlatformConnectOptions("connect://localhost:1111");
err = remote_platform.ConnectRemote(connect_options)
if err.Success():
print >> result, 'Connected to remote platform:'
print >> result, 'hostname: %s' % (remote_platform.GetHostname())
src = lldb.SBFileSpec("/Applications/Xcode.app/Contents/SharedFrameworks/LLDB.framework", False)
dst = lldb.SBFileSpec()
# copy src to platform working directory since "dst" is empty
err = remote_platform.Install(src, dst);
if err.Success():
print >> result, '%s installed successfully' % (src)
else:
print >> result, 'error: failed to install "%s": %s' % (src, err)
Implemented many calls needed in lldb-platform to be able to install a directory that contains symlinks, file and directories.
The remote lldb-platform can now launch GDB servers on the remote system so that remote debugging can be spawned through the remote platform when connected to a remote platform.
The API in SBPlatform is subject to change and will be getting many new functions.
llvm-svn: 195273